It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
v2: Fix checkpatch whitespace complaint
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7e776690bf139ccdd0306b30df08dc68e74603de.1554461791.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
v2: Remove stray newline (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/db44ba199c86f24bfa9e490531eddf51cccd89da.1554461791.git.jani.nikula@intel.com
Haswell+ require many power wells to probe the current HW display state.
Under the wakeref tracking scheme, we want each owner to store and
release the wakeref they use, so we can identify callers that have
leaked their wakeref. For hsw_get_pipe_config, this means we have to
keep the array of all wakerefs as it current acquires its power wells
piecemeal and releases them en masse.
By tracking these wakerefs, we should be able to eliminate a lot of
noise from the runtime-pm debug logs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190406080341.2654-1-chris@chris-wilson.co.uk
If we have only a single active pipe and the cdclk change only requires
the cd2x divider to be updated bxt+ can do the update with forcing a full
modeset on the pipe. Try to hook that up.
v2:
- Wait for vblank after an optimized CDCLK change.
- Avoid optimization if the pipe needs a modeset (or was disabled).
- Split CDCLK change to a pre/post plane update step.
v3:
- Use correct version of CDCLK state as old state. (Ville)
- Remove unused intel_cdclk_can_skip_modeset()
v4:
- For consistency call intel_set_cdclk_post_plane_update() only during
modesets (and not fastsets).
v5:
- Remove the logic to update the CD2X divider on-the-fly on ICL, since
only a divider of 1 is supported there. Clint also noticed that the
pipe select bits in CDCLK_CTL are oddly defined on ICL, it's not clear
yet whether that's only an error in the specification.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Tested-by: Abhay Kumar <abhay.kumar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327101321.3095-1-imre.deak@intel.com
CDCLK has to be at least twice the BLCK regardless of audio. Audio
driver has to probe using this hook and increase the clock even in
absence of any display.
v2: Use atomic refcount for get_power, put_power so that we can
call each once(Abhay).
v3: Reset power well 2 to avoid any transaction on iDisp link
during cdclk change(Abhay).
v4: Remove Power well 2 reset workaround(Ville).
v5: Remove unwanted Power well 2 register defined in v4(Abhay).
v6:
- Use a dedicated flag instead of state->modeset for min CDCLK changes
- Make get/put audio power domain symmetric
- Rebased on top of intel_wakeref tracking changes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Tested-by: Abhay Kumar <abhay.kumar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320135439.12201-1-imre.deak@intel.com
This exactly same approach was already used from gen9
to gen10 and from gen10 to gen11. Let's also use it
for gen11+.
Let's first assume that we inherit a similar platform
and than we apply the differences on top.
Different from the previous attempts this will be
done this time with coccinelle. We obviously need to
exclude some case that is really exclusive for gen11
like PCH, Firmware, and few others. Luckly this was
easy to filter by selecting the files we are touching
with coccinelle as exposed below:
spatch -sp_file gen11\+.cocci --in-place i915_perf.c \
intel_bios.c intel_cdclk.c intel_ddi.c \
intel_device_info.c intel_display.c intel_dpll_mgr.c \
intel_dsi_vbt.c intel_hdmi.c intel_mocs.c intel_color.c
@noticelake@ expression e; @@
-!IS_ICELAKE(e)
+INTEL_GEN(e) < 11
@notgen11@ expression e; @@
-!IS_GEN(e, 11)
+INTEL_GEN(e) < 11
@icelake@ expression e; @@
-IS_ICELAKE(e)
+INTEL_GEN(e) >= 11
@gen11@ expression e; @@
-IS_GEN(e, 11)
+INTEL_GEN(e) >= 11
No functional change.
v2: Remove intel_lrc.c per Tvrtko request since those were w/a
for ICL hw issuea and media related configuration.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-1-rodrigo.vivi@intel.com
In any commit, intel_modeset_pipe_config() will initialilly clear
and then recalculate most of the pipe states but it leave intel
specific color features states in reset state.
If after intel_pipe_config_compare() is detected that a fastset is
possible it will mark update_pipe as true and unsed mode_changed,
causing the color features state to be kept in reset state and then
latter being committed to hardware disabling the color features.
This issue can be reproduced by any code patch that duplicates the
actual(with color features already enabled) state and only mark
mode_changed as true.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-3-jose.souza@intel.com
The current code clears the DPLL register entirely when re-enabling
VGA mode temporarily during the DPLL enable sequence. On i830 we want to
keep the DPLLs on all the time, so let's not do this temporary
disabling.
The current code does work, so this doesn't seem super important.
But I prefer that we make the behaviour 100% consistent.
v2: Split this change the DVO 2x clocking patch
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305192400.23121-1-ville.syrjala@linux.intel.com
Defining the mei-i915 interface functions and initialization of
the interface.
v2:
Adjust to the new interface changes. [Tomas]
Added further debug logs for the failures at MEI i/f.
port in hdcp_port data is equipped to handle -ve values.
v3:
mei comp is matched for global i915 comp master. [Daniel]
In hdcp_shim hdcp_protocol() is replaced with const variable. [Daniel]
mei wrappers are adjusted as per the i/f change [Daniel]
v4:
port initialization is done only at hdcp2_init only [Danvet]
v5:
I915 registers a subcomponent to be matched with mei_hdcp [Daniel]
v6:
HDCP_disable for all connectors incase of comp_unbind.
Tear down HDCP comp interface at i915_unload [Daniel]
v7:
Component init and fini are moved out of connector ops [Daniel]
hdcp_disable is not called from unbind. [Daniel]
v8:
subcomponent name is dropped as it is already merged.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> [v11]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-5-git-send-email-ramalingam.c@intel.com
At least on i965g and i965gm, performing a device reset clobbers the IER
resulting in loss of interrupts thereafter. So, run the irq_postinstall
hook to restore them.
v2: Ville pointed out that he already attempted to solve this problem by
reinstalling the interrupts in intel_reset_finish() (part of the display
handling around reset). However, reinstalling the irq clobbers the
i915->irq_mask which we need for handling MI_USER_INTERRUPTS, and does
so too late to handle any interrupts generated from resuming the rings.
The simple solution to both is to pull the interrupt reenabling from
afterwards to around the device reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218153106.16768-1-chris@chris-wilson.co.uk
