Add the mapped page count checking flow to avoid invalid page size when
creating MTR.
Fixes: 38389eaa4d ("RDMA/hns: Add mtr support for mixed multihop addressing")
Link: https://lore.kernel.org/r/1612517974-31867-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This bit should be in type of enum ib_sig_type, or there will be a sparse
warning.
Fixes: bfe860351e ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1612517974-31867-3-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ULP usually set IB(V)_QP_AV when trying to modify QP to RTR if they want
to record sgid index into QPC. For UD QPs, it is useless because it will
be included in WQE. For RC QPs, it will be filled in
hns_roce_set_path(). So sgid index shouldn't be filled by default. Then
hns_get_gid_index() is moved to hns_roce_hw_v1.c because it is only called
in it.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1612517974-31867-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Direct wqe is a mechanism to fill wqe directly into the hardware. In the
case of light load, the wqe will be filled into pcie bar space of the
hardware, this will reduce one memory access operation and therefore
reduce the latency.
Link: https://lore.kernel.org/r/1611997513-27107-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Vlad Buslov says:
=================
Implement support for VF tunneling
Abstract
Currently, mlx5 only supports configuration with tunnel endpoint IP address on
uplink representor. Remove implicit and explicit assumptions of tunnel always
being terminated on uplink and implement necessary infrastructure for
configuring tunnels on VF representors and updating rules on such tunnels
according to routing changes.
SW TC model
From TC perspective VF tunnel configuration requires two rules in both
directions:
TX rules
1. Rule that redirects packets from UL to VF rep that has the tunnel
endpoint IP address:
$ tc -s filter show dev enp8s0f0 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac 16:c9:a0:2d:69:2c
src_mac 0c:42:a1:58:ab:e4
eth_type ipv4
ip_flags nofrag
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device enp8s0f0_0) stolen
index 3 ref 1 bind 1 installed 377 sec used 0 sec
Action statistics:
Sent 114096 bytes 952 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 114096 bytes 952 pkt
backlog 0b 0p requeues 0
cookie 878fa48d8c423fc08c3b6ca599b50a97
no_percpu
used_hw_stats delayed
2. Rule that decapsulates the tunneled flow and redirects to destination VF
representor:
$ tc -s filter show dev vxlan_sys_4789 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac ca:2e:a7:3f:f5:0f
src_mac 0a:40:bd:30:89:99
eth_type ipv4
enc_dst_ip 7.7.7.5
enc_src_ip 7.7.7.1
enc_key_id 98
enc_dst_port 4789
enc_tos 0
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key unset pipe
index 2 ref 1 bind 1 installed 434 sec used 434 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen
index 4 ref 1 bind 1 installed 434 sec used 0 sec
Action statistics:
Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 129936 bytes 1082 pkt
backlog 0b 0p requeues 0
cookie ac17cf398c4c69e4a5b2f7aabd1b88ff
no_percpu
used_hw_stats delayed
RX rules
1. Rule that encapsulates the tunneled flow and redirects packets from
source VF rep to tunnel device:
$ tc -s filter show dev enp8s0f0_1 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac 0a:40:bd:30:89:99
src_mac ca:2e:a7:3f:f5:0f
eth_type ipv4
ip_tos 0/0x3
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 7.7.7.5
dst_ip 7.7.7.1
key_id 98
dst_port 4789
nocsum
ttl 64 pipe
index 1 ref 1 bind 1 installed 411 sec used 411 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
no_percpu
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device vxlan_sys_4789) stolen
index 1 ref 1 bind 1 installed 411 sec used 0 sec
Action statistics:
Sent 5615833 bytes 4028 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 5615833 bytes 4028 pkt
backlog 0b 0p requeues 0
cookie bb406d45d343bf7ade9690ae80c7cba4
no_percpu
used_hw_stats delayed
2. Rule that redirects from tunnel device to UL rep:
$ tc -s filter show dev vxlan_sys_4789 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac ca:2e:a7:3f:f5:0f
src_mac 0a:40:bd:30:89:99
eth_type ipv4
enc_dst_ip 7.7.7.5
enc_src_ip 7.7.7.1
enc_key_id 98
enc_dst_port 4789
enc_tos 0
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key unset pipe
index 2 ref 1 bind 1 installed 434 sec used 434 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen
index 4 ref 1 bind 1 installed 434 sec used 0 sec
Action statistics:
Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 129936 bytes 1082 pkt
backlog 0b 0p requeues 0
cookie ac17cf398c4c69e4a5b2f7aabd1b88ff
no_percpu
used_hw_stats delayed
HW offloads model
For hardware offload the goal is to mach packet on both rules without exposing
it to software on tunnel endpoint VF. In order to achieve this for tx, TC
implementation marks encap rules with tunnel endpoint on mlx5 VF of same eswitch
with MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE flag and adds header modification
rule to overwrite packet source port to the value of tunnel VF. Eswitch code is
modified to recirculate such packets after source port value is changed, which
allows second tx rules to match.
For rx path indirect table infrastructure is used to allow fully processing VF
tunnel traffic in hardware. To implement such pipeline driver needs to program
the hardware after matching on UL rule to overwrite source vport from UL to
tunnel VF and recirculate the packet to the root table to allow matching on the
rule installed on tunnel VF. For this, indirect table matches all encapsulated
traffic by tunnel parameters and all other IP traffic is sent to tunnel VF by
the miss rule. Such configuration will cause packet to appear on VF representor
instead of VF itself if packet has been matches by indirect table rule based on
tunnel parameters but missed on second rule (after recirculation). Handle such
case by marking packets processed by indirect table with special 0xFFF value in
reg_c1 and extending slow table with additional flow group that matches on
reg_c0 (source port value set by indirect tables) and reg_c1 (special 0xFFF
mark). When creating offloads fdb tables, install one rule per VF vport to match
on recirculated miss packets and redirect them to appropriate VF vport.
Routing events
In order to support routing changes and migration of tunnel device between
different endpoint VFs, implement routing infrastructure and update it with FIB
events. Routing entry table is introduced to mlx5 TC. Every rx and tx VF tunnel
rule is attached to a routing entry, which is shared for rules of same tunnel.
On FIB event the work is scheduled to delete/recreate all rules of affected
tunnel.
Note: only vxlan tunnel type is supported by this series.
=================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmAeINMACgkQSD+KveBX
+j5ssAgAlmHUXB13W8FzXmp37hj6990QVVUNMe1tX09u6TOKi3X9VgRydCLdZlIm
CEgdknjhlesjiYsy4z9o8MTV4IXGnNoy+qW9cuL9SCpDpVLeJ0g+3/laUv21oOhr
zGxR4nmLwDxpzAj8huqOv5kVlojiA90x9wZIiOjx0+obOmglhfjzpUORAGXeHQTf
yxeiEi1ef5MO02lE854gzPBF60XB6LN7+Viw+4E+G67n7TdvIQ0xu2j/DpOubpH2
BzXoU12a424FvpAhhW8xrIZF4wFEo120Ln+vDMGq30Hqo/9gFQ1EmSBXaOOVhPwx
M/gJ3OJhckrMpNs36tdCyoOm/pTS+w==
=7d1N
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2021-02-04
Vlad Buslov says:
=================
Implement support for VF tunneling
Abstract
Currently, mlx5 only supports configuration with tunnel endpoint IP address on
uplink representor. Remove implicit and explicit assumptions of tunnel always
being terminated on uplink and implement necessary infrastructure for
configuring tunnels on VF representors and updating rules on such tunnels
according to routing changes.
SW TC model
From TC perspective VF tunnel configuration requires two rules in both
directions:
TX rules
1. Rule that redirects packets from UL to VF rep that has the tunnel
endpoint IP address:
$ tc -s filter show dev enp8s0f0 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac 16:c9:a0:2d:69:2c
src_mac 0c:42:a1:58:ab:e4
eth_type ipv4
ip_flags nofrag
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device enp8s0f0_0) stolen
index 3 ref 1 bind 1 installed 377 sec used 0 sec
Action statistics:
Sent 114096 bytes 952 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 114096 bytes 952 pkt
backlog 0b 0p requeues 0
cookie 878fa48d8c423fc08c3b6ca599b50a97
no_percpu
used_hw_stats delayed
2. Rule that decapsulates the tunneled flow and redirects to destination VF
representor:
$ tc -s filter show dev vxlan_sys_4789 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac ca:2e:a7:3f:f5:0f
src_mac 0a:40:bd:30:89:99
eth_type ipv4
enc_dst_ip 7.7.7.5
enc_src_ip 7.7.7.1
enc_key_id 98
enc_dst_port 4789
enc_tos 0
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key unset pipe
index 2 ref 1 bind 1 installed 434 sec used 434 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen
index 4 ref 1 bind 1 installed 434 sec used 0 sec
Action statistics:
Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 129936 bytes 1082 pkt
backlog 0b 0p requeues 0
cookie ac17cf398c4c69e4a5b2f7aabd1b88ff
no_percpu
used_hw_stats delayed
RX rules
1. Rule that encapsulates the tunneled flow and redirects packets from
source VF rep to tunnel device:
$ tc -s filter show dev enp8s0f0_1 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac 0a:40:bd:30:89:99
src_mac ca:2e:a7:3f:f5:0f
eth_type ipv4
ip_tos 0/0x3
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 7.7.7.5
dst_ip 7.7.7.1
key_id 98
dst_port 4789
nocsum
ttl 64 pipe
index 1 ref 1 bind 1 installed 411 sec used 411 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
no_percpu
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device vxlan_sys_4789) stolen
index 1 ref 1 bind 1 installed 411 sec used 0 sec
Action statistics:
Sent 5615833 bytes 4028 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 5615833 bytes 4028 pkt
backlog 0b 0p requeues 0
cookie bb406d45d343bf7ade9690ae80c7cba4
no_percpu
used_hw_stats delayed
2. Rule that redirects from tunnel device to UL rep:
$ tc -s filter show dev vxlan_sys_4789 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac ca:2e:a7:3f:f5:0f
src_mac 0a:40:bd:30:89:99
eth_type ipv4
enc_dst_ip 7.7.7.5
enc_src_ip 7.7.7.1
enc_key_id 98
enc_dst_port 4789
enc_tos 0
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key unset pipe
index 2 ref 1 bind 1 installed 434 sec used 434 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen
index 4 ref 1 bind 1 installed 434 sec used 0 sec
Action statistics:
Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 129936 bytes 1082 pkt
backlog 0b 0p requeues 0
cookie ac17cf398c4c69e4a5b2f7aabd1b88ff
no_percpu
used_hw_stats delayed
HW offloads model
For hardware offload the goal is to mach packet on both rules without exposing
it to software on tunnel endpoint VF. In order to achieve this for tx, TC
implementation marks encap rules with tunnel endpoint on mlx5 VF of same eswitch
with MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE flag and adds header modification
rule to overwrite packet source port to the value of tunnel VF. Eswitch code is
modified to recirculate such packets after source port value is changed, which
allows second tx rules to match.
For rx path indirect table infrastructure is used to allow fully processing VF
tunnel traffic in hardware. To implement such pipeline driver needs to program
the hardware after matching on UL rule to overwrite source vport from UL to
tunnel VF and recirculate the packet to the root table to allow matching on the
rule installed on tunnel VF. For this, indirect table matches all encapsulated
traffic by tunnel parameters and all other IP traffic is sent to tunnel VF by
the miss rule. Such configuration will cause packet to appear on VF representor
instead of VF itself if packet has been matches by indirect table rule based on
tunnel parameters but missed on second rule (after recirculation). Handle such
case by marking packets processed by indirect table with special 0xFFF value in
reg_c1 and extending slow table with additional flow group that matches on
reg_c0 (source port value set by indirect tables) and reg_c1 (special 0xFFF
mark). When creating offloads fdb tables, install one rule per VF vport to match
on recirculated miss packets and redirect them to appropriate VF vport.
Routing events
In order to support routing changes and migration of tunnel device between
different endpoint VFs, implement routing infrastructure and update it with FIB
events. Routing entry table is introduced to mlx5 TC. Every rx and tx VF tunnel
rule is attached to a routing entry, which is shared for rules of same tunnel.
On FIB event the work is scheduled to delete/recreate all rules of affected
tunnel.
Note: only vxlan tunnel type is supported by this series.
=================
It is likely that this is a leftover from T3 driver heritage. cxgb4 uses
the PCI core VPD access code that handles detection of VPD capabilities.
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A ZONE_APPEND bio must follow hardware restrictions (e.g. not exceeding
max_zone_append_sectors) not to be split. bio_iov_iter_get_pages builds
such restricted bio using __bio_iov_append_get_pages if bio_op(bio) ==
REQ_OP_ZONE_APPEND.
To utilize it, we need to set the bio_op before calling
bio_iov_iter_get_pages(). This commit introduces IOMAP_F_ZONE_APPEND, so
that iomap user can set the flag to indicate they want REQ_OP_ZONE_APPEND
and restricted bio.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add bio_add_zone_append_page(), a wrapper around bio_add_hw_page() which
is intended to be used by file systems that directly add pages to a bio
instead of using bio_iov_iter_get_pages().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Restore the original behaviour where users are allowed to add an element
with any stateful expression if the set definition specifies no stateful
expressions. Make sure upper maximum number of stateful expressions of
NFT_SET_EXPR_MAX is not reached.
Fixes: 8cfd9b0f85 ("netfilter: nftables: generalize set expressions support")
Fixes: 48b0ae046e ("netfilter: nftables: netlink support for several set element expressions")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only older versions of the RISC-V GCC toolchain define __riscv__. Check
for __riscv as well, which is used by newer GCC toolchains. Also set
VDSO_32BIT based on __riscv_xlen.
Before (on riscv64):
$ ./vdso_test_abi
[vDSO kselftest] VDSO_VERSION: LINUX_4
Could not find __vdso_gettimeofday
Could not find __vdso_clock_gettime
Could not find __vdso_clock_getres
clock_id: CLOCK_REALTIME [PASS]
Could not find __vdso_clock_gettime
Could not find __vdso_clock_getres
clock_id: CLOCK_BOOTTIME [PASS]
Could not find __vdso_clock_gettime
Could not find __vdso_clock_getres
clock_id: CLOCK_TAI [PASS]
Could not find __vdso_clock_gettime
Could not find __vdso_clock_getres
clock_id: CLOCK_REALTIME_COARSE [PASS]
Could not find __vdso_clock_gettime
Could not find __vdso_clock_getres
clock_id: CLOCK_MONOTONIC [PASS]
Could not find __vdso_clock_gettime
Could not find __vdso_clock_getres
clock_id: CLOCK_MONOTONIC_RAW [PASS]
Could not find __vdso_clock_gettime
Could not find __vdso_clock_getres
clock_id: CLOCK_MONOTONIC_COARSE [PASS]
Could not find __vdso_time
After (on riscv32):
$ ./vdso_test_abi
[vDSO kselftest] VDSO_VERSION: LINUX_4.15
The time is 1612449376.015086
The time is 1612449376.18340784
The resolution is 0 1
clock_id: CLOCK_REALTIME [PASS]
The time is 774.842586182
The resolution is 0 1
clock_id: CLOCK_BOOTTIME [PASS]
The time is 1612449376.22536565
The resolution is 0 1
clock_id: CLOCK_TAI [PASS]
The time is 1612449376.20885172
The resolution is 0 4000000
clock_id: CLOCK_REALTIME_COARSE [PASS]
The time is 774.845491269
The resolution is 0 1
clock_id: CLOCK_MONOTONIC [PASS]
The time is 774.849534200
The resolution is 0 1
clock_id: CLOCK_MONOTONIC_RAW [PASS]
The time is 774.842139684
The resolution is 0 4000000
clock_id: CLOCK_MONOTONIC_COARSE [PASS]
Could not find __vdso_time
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The SRQ in the hns driver consists of the following four parts:
* wqe buf: the buffer to store WQE.
* wqe_idx buf: the cqe of SRQ may be not generated in the order of wqe, so
the wqe_idx corresponding to the idle WQE needs to be pushed into the
index queue which is a FIFO, then it instructs the hardware to obtain
the corresponding WQE.
* bitmap: bitmap is used to generate and release wqe_idx. When the user
has a new WR, the driver finds the idx of the idle wqe in bitmap. When
the CQE of wqe is generated, the driver will release the idx.
* wr_id buf: wr_id buf is used to store the user's wr_id, then return it
to the user when poll_cq verb is invoked.
The process of post SRQ recv is refactored to make preceding code clearer.
Link: https://lore.kernel.org/r/1611997090-48820-12-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HIP09 requires the driver to clear the unused data segments in wqe
buffer to make the hns ROCEE stop reading the remaining invalid sges for
RQ.
Link: https://lore.kernel.org/r/1611997090-48820-11-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reduce parameter numbers of write_srqc() and move some related code into
it from alloc_srqc().
Link: https://lore.kernel.org/r/1611997090-48820-8-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split the SRQ creation process into multiple steps and encapsulate them
into functions.
Link: https://lore.kernel.org/r/1611997090-48820-7-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each SRQs contain an reserved WQE, it is inappropriate and should be
removed.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-6-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When an error occurs, the qp_table must be cleared, regardless of whether
the SRQ feature is enabled.
Fixes: 5c1f167af1 ("RDMA/hns: Init SRQ table for hip08")
Link: https://lore.kernel.org/r/1611997090-48820-5-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the IB Specification, srq_limit shouldn't be configured
during SRQ creation. If a user set srq_limit at this time, the driver
should forced it to zero, or the result of creating SRQ will conflict with
the result of querying SRQ.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If a user posts WR by wr_list, the head pointer of idx_queue won't be
updated until all wqes are filled, so the judgment of whether head equals
to tail will get a wrong result. Fix above issue and move the head and
tail pointer from the srq structure into the idx_queue structure. After
idx_queue is filled with wqe idx, the head pointer of it will increase.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RQ/SRQ of HIP08 needs one special sge to stop receive reliably. So the
driver needs to allocate at least one SGE when creating RQ/SRQ and ensure
that at least one SGE is filled with the special value during post_recv.
Besides, the kernel driver should only do this for kernel ULP. For
userspace ULP, the userspace driver will allocate the reserved SGE in
buffer, and the kernel driver just needs to pin the corresponding size of
memory based on the userspace driver's requirements.
Link: https://lore.kernel.org/r/1611997090-48820-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Eliminate the following coccicheck warning:
./tools/testing/selftests/x86/ldt_gdt.c:610:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a check to validate that buffers allocated from the heaps
are properly zeroed before being given to userland.
It is done by allocating a number of buffers, and filling them
with a nonzero pattern, then closing and reallocating more
buffers and checking that they are all properly zeroed.
This is helpful to validate any cached buffers are zeroed
before being given back out.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cleanup the test output so it is a bit easier to read
Cc: Shuah Khan <shuah@kernel.org>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
While testing against a vgem device is helpful for testing importing
they aren't always configured in, so don't make it a fatal failure.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Copied in from somewhere else, the makefile was including
the kerne's usr/include dir, which caused the asm/ioctl.h file
to be used.
Unfortunately, that file has different values for _IOC_SIZEBITS
and _IOC_WRITE than include/uapi/asm-generic/ioctl.h which then
causes the _IOCW macros to give the wrong ioctl numbers,
specifically for DMA_BUF_IOCTL_SYNC.
This patch simply removes the extra include from the Makefile
Cc: Shuah Khan <shuah@kernel.org>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kselftest@vger.kernel.org
Fixes: a8779927fd ("kselftests: Add dma-heap test")
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Kernel's key folding basically consists of shifting away least
significant zero bits in mask and masking the resulting value with
(divisor - 1). Test for u32's 'sample' option to behave identical.
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rxrpc_open_socket(), now it's using sock_create_kern() and
kernel_bind() to create a udp tunnel socket, and other kernel
APIs to set up it. These code can be replaced with udp tunnel
APIs udp_sock_create() and setup_udp_tunnel_sock(), and it'll
simplify rxrpc_open_socket().
Note that with this patch, the udp tunnel socket will always
bind to a random port if transport is not provided by users,
which is suggested by David Howells, thanks!
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a bug that has been present since the first version of this
code.
Using [] as a default parameter is dangerous, since it's mutable.
Example using the REPL:
>>> def bad(param = []):
... param.append(len(param))
... print(param)
...
>>> bad()
[0]
>>> bad()
[0, 1]
This wasn't a concern in the past since it would just keep appending the
same values to it.
E.g. before, `args` would just grow in size like:
[mem=1G', 'console=tty']
[mem=1G', 'console=tty', mem=1G', 'console=tty']
But with now filter_glob, this is more dangerous, e.g.
run_kernel(filter_glob='my-test*') # default modified here
run_kernel() # filter_glob still applies here!
That earlier `filter_glob` will affect all subsequent calls that don't
specify `args`.
Note: currently the kunit tool only calls run_kernel() at most once, so
it's not possible to trigger any negative side-effects right now.
Fixes: 6ebf5866f2 ("kunit: tool: add Python wrappers for running KUnit tests")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This allows running different subsets of tests, e.g.
$ ./tools/testing/kunit/kunit.py build
$ ./tools/testing/kunit/kunit.py exec 'list*'
$ ./tools/testing/kunit/kunit.py exec 'kunit*'
This passes the "kunit_filter.glob" commandline option to the UML
kernel, which currently only supports filtering by suite name.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
E.g. specifying this would run suites with "list" in their name.
kunit.filter_glob=list*
Note: the executor prints out a TAP header that includes the number of
suites we intend to run.
So unless we want to report empty results for filtered-out suites, we
need to do the filtering here in the executor.
It's also probably better in the executor since we most likely don't
want any filtering to apply to tests built as modules.
This code does add a CONFIG_GLOB=y dependency for CONFIG_KUNIT=y.
But the code seems light enough that it shouldn't be an issue.
For now, we only filter on suite names so we don't have to create copies
of the suites themselves, just the array (of arrays) holding them.
The name is rather generic since in the future, we could consider
extending it to a syntax like:
kunit.filter_glob=<suite_glob>.<test_glob>
E.g. to run all the del list tests
kunit.filter_glob=list-kunit-test.*del*
But at the moment, it's far easier to manually comment out test cases in
test files as opposed to messing with sets of Kconfig entries to select
specific suites.
So even just doing this makes using kunit far less annoying.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In order to access the suboordinate dev for a device we should be holding
the rtnl_lock when outside of the transmit path. The existing code was not
doing that for the sysfs dump function and as a result we were open to a
possible race.
To resolve that take the rtnl lock prior to accessing the sb_dev field of
the Tx queue and release it after we have retrieved the tc for the queue.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The origin skip check needs to re-test the zone. Else, we might skip
a colliding tuple in the reply direction.
This only occurs when using 'directional zones' where origin tuples
reside in different zones but the reply tuples share the same zone.
This causes the new conntrack entry to be dropped at confirmation time
because NAT clash resolution was elided.
Fixes: 4e35c1cb94 ("netfilter: nf_nat: skip nat clash resolution for same-origin entries")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Change the retry policy in ext4_alloc_file_blocks() to allow for a full
retry cycle whenever a portion of an allocation request has been
fulfilled. A large allocation request often results in multiple calls
to ext4_map_blocks(), each of which is potentially subject to a
temporary ENOSPC condition and retry cycle. The current code only
allows for a single retry cycle.
This patch does not address a known bug or reported complaint.
However, it should make block allocation for fallocate and zero range
more robust.
In addition, simplify the conditional controlling the allocation while
loop, where testing len alone is sufficient. Remove the assignment to
ret2 in the error path after the call to ext4_map_blocks() since its
value isn't subsequently used.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20210113221403.18258-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The variable r is defined at the beginning and initialized
to 0 until the function returns r, and the variable r is
not reassigned.Therefore, we do not need to define the
variable r, just return 0 directly at the end of the function.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eliminate the following coccicheck warning:
./tools/testing/selftests/net/so_txtime.c:199:3-4: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, given something (fairly dystopian) like
> KUNIT_EXPECT_EQ(test, 2 + 2, 5)
KUnit will prints a failure message like this.
> Expected 2 + 2 == 5, but
> 2 + 2 == 4
> 5 == 5
With this patch, the output just becomes
> Expected 2 + 2 == 5, but
> 2 + 2 == 4
This patch is slightly hacky, but it's quite common* to compare an
expression to a literal integer value, so this can make KUnit less
chatty in many cases. (This patch also fixes variants like
KUNIT_EXPECT_GT, LE, et al.).
It also allocates an additional string briefly, but given this only
happens on test failures, it doesn't seem too bad a tradeoff.
Also, in most cases it'll realize the lengths are unequal and bail out
before the allocation.
We could save the result of the formatted string to avoid wasting this
extra work, but it felt cleaner to leave it as-is.
Edge case: for something silly and unrealistic like
> KUNIT_EXPECT_EQ(test, 4, 5);
It'll generate this message with a trailing "but"
> Expected 4 == 5, but
> <next line of normal output>
It didn't feel worth adding a check up-front to see if both sides are
literals to handle this better.
*A quick grep suggests 100+ comparisons to an integer literal as the
right hand side.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently running tests via KUnit tool means tweaking a .kunitconfig
file, which you'd keep around locally and never commit.
This changes makes it so users can pass in a path to a kunitconfig.
One of the imagined use cases is having kunitconfig fragments in-tree
to formalize interesting sets of tests for features/subsystems, e.g.
$ ./tools/testing/kunit/kunit.py run --kunticonfig=fs/ext4/kunitconfig
For now, this hypothetical fs/ext4/kunitconfig would contain
CONFIG_KUNIT=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_KUNIT_TESTS=y
At the moment, it's not hard to manually whip up this file, but as more
and more tests get added, this will get tedious.
It also opens the door to documenting how to run all the tests relevant
to a specific subsystem or feature as a simple one-liner.
This can be seen as an analogue to tools/testing/selftests/*/config
But in the case of KUnit, the tests live in the same directory as the
code-under-test, so it feels more natural to allow the kunitconfig
fragments to live anywhere. (Though, people could create a separate
directory if wanted; this patch imposes no restrictions on the path).
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
./usage.rst contains fairly long examples and explanations of things
like how to fake a class and how to use parameterized tests (and how you
could do table-driven tests yourself).
It's not exactly necessary information, so we add a new page with more
digestible tips like "use kunit_kzalloc() instead of kzalloc() so you
don't have to worry about calling kfree() yourself" and the like.
Change start.rst to point users to this new page first and let them know
that usage.rst is more of optional further reading.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The primary change is that we want to encourage people to respect
KUNIT_ALL_TESTS to make it easy to run all the relevant tests for a
given config.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Don't use an O(nm) algorithm* and make it more readable by using a dict.
*Most obviously, it does a nested for-loop over the entire other config.
A bit more subtle, it calls .entries(), which constructs a set from the
list for _every_ outer iteration.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Also take this time to rename get_absolute_path() to test_data_path().
1. the name is currently a lie. It gives relative paths, e.g. if I run
from the same dir as the test file, it gives './test_data/<file>'
See https://docs.python.org/3/reference/import.html#__file__, which
doesn't stipulate that implementations provide absolute paths.
2. it's only used for generating paths to tools/testing/kunit/test_data/
So we can tersen things by making it less general.
Cache the absolute path to the test data files per suggestion from [1].
Using relative paths, the tests break because of this code in kunit.py
if get_kernel_root_path():
os.chdir(get_kernel_root_path())
[1] https://lore.kernel.org/linux-kselftest/CABVgOSnH0gz7z5JhRCGyG1wg0zDDBTLoSUCoB-gWMeXLgVTo2w@mail.gmail.com/
Fixes: 5578d008d9 ("kunit: tool: fix running kunit_tool from outside kernel tree")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The use of manual open() and .close() calls seems to be an attempt to
keep the contents in scope.
But Python doesn't restrict variables like that, so we can introduce new
variables inside of a `with` and use them outside.
Do so to make the code more Pythonic.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use self.assertEqual/assertNotEqual() instead.
Besides being more appropriate in a unit test, it'll also give a better
error message by show the unexpected values.
Also
* Delete redundant check of exception types. self.assertRaises does this.
* s/kall/call. There's no reason to name it this way.
* This is probably a misunderstanding from the docs which uses it
since `mock.call` is in scope as `call`.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
