An earlier commit moved out some functions to not be inlined by gcc, but
after some other rework to remove one of those, clang started inlining
the other one and ran into the same problem as gcc did before:
fs/ubifs/replay.c:1174:5: error: stack frame size of 1152 bytes in function 'ubifs_replay_journal' [-Werror,-Wframe-larger-than=]
Mark the function as noinline_for_stack to ensure it doesn't happen
again.
Fixes: f80df38512 ("ubifs: use crypto_shash_tfm_digest()")
Fixes: eb66eff663 ("ubifs: replay: Fix high stack usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
When crypto_shash_digestsize() fails, c->hmac_tfm
has not been freed before returning, which leads
to memleak.
Fixes: 49525e5eec ("ubifs: Add helper functions for authentication support")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
clang static analysis reports this problem
fs/jffs2/summary.c:794:31: warning: Use of memory after it is freed
c->summary->sum_list_head = temp->u.next;
^~~~~~~~~~~~
In jffs2_sum_write_data(), in a loop summary data is handles a node at
a time. When it has written out the node it is removed the summary list,
and the node is deleted. In the corner case when a
JFFS2_FEATURE_RWCOMPAT_COPY is seen, a call is made to
jffs2_sum_disable_collecting(). jffs2_sum_disable_collecting() deletes
the whole list which conflicts with the loop's deleting the list by parts.
To preserve the old behavior of stopping the write midway, bail out of
the loop after disabling summary collection.
Fixes: 6171586a7a ("[JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The parameter of kfree function is NULL, so kfree code is useless, delete it.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
data_size is already checked against zero when vol_type matches
UBI_VID_STATIC. Remove the following dead code.
Signed-off-by: Jubin Zhong <zhongjubin@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This patch is to store operation type in packet structure.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20210211133856.2137-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to store virtual and physical memory addresses in packet,
which will be used for memory samples.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210211133856.2137-2-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This will get the (no-op) definition of irq_canonicalize()
which some code might want. We could define that ourselves,
but it seems like we'd likely want generic extensions in
the future, if any.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This may be needed for size_t if something doesn't get
it included elsewhere before including <asm/io.h>, so
add the include.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Add a pseudo RTC that simply is able to send an alarm signal
waking up the system at a given time in the future.
Since apparently timerfd_create() FDs don't support SIGIO, we
use the sigio-creating helper thread, which just learned to do
suspend/resume properly in the previous patch.
For time-travel mode, OTOH, just add an event at the specified
time in the future, and that's already sufficient to wake up
the system at that point in time since suspend will just be in
an "endless wait".
For s2idle support also call pm_system_wakeup().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This patch is to enable sample type PERF_SAMPLE_DATA_SRC for Arm SPE in
the perf data, when output the tracing data, it tells tools that it
contains data source in the memory event.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210211133856.2137-1-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This mostly reverts the old commit 3963333fe6 ("uml: cover stubs
with a VMA") which had added a VMA to the existing PTEs. However,
there's no real reason to have the PTEs in the first place and the
VMA cannot be 'fixed' in place, which leads to bugs that userspace
could try to unmap them and be forcefully killed, or such. Also,
there's a bit of an ugly hole in userspace's address space.
Simplify all this: just install the stub code/page at the top of
the (inner) address space, i.e. put it just above TASK_SIZE. The
pages are simply hard-coded to be mapped in the userspace process
we use to implement an mm context, and they're out of reach of the
inner mmap/munmap/mprotect etc. since they're above TASK_SIZE.
Getting rid of the VMA also makes vma_merge() no longer hit one of
the VM_WARN_ON()s there because we installed a VMA while the code
assumes the stack VMA is the first one.
It also removes a lockdep warning about mmap_sem usage since we no
longer have uml_setup_stubs() and thus no longer need to do any
manipulation that would require mmap_sem in activate_mm().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Minor cleanup.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210211183914.4093187-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The userspace stacks mostly have a stack (and in the case of the
syscall stub we can just set their stack pointer) that points to
the location of the stub data page already.
Rework the stubs to use the stack pointer to derive the start of
the data page, rather than requiring it to be hard-coded.
In the clone stub, also integrate the int3 into the stack remap,
since we really must not use the stack while we remap it.
This prepares for putting the stub at a variable location that's
not part of the normal address space of the userspace processes
running inside the UML machine.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If the two are mixed up, then it looks as though the parent
returned an error if the child failed (before) the mmap(),
and then the resulting process never gets killed. Fix this
by splitting the child and parent errors, reporting and
using them appropriately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In some cases we can get to fix_range_common() with mmap_sem held,
and in others we get there without it being held. For example, we
get there with it held from sys_mprotect(), and without it held
from fork_handler().
Avoid any issues in this and simply defer killing the task until
it runs the next time. Do it on the mm so that another task that
shares the same mm can't continue running afterwards.
Cc: stable@vger.kernel.org
Fixes: 468f65976a ("um: Fix hung task in fix_range_common()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If userspace tries to change the stub, we need to kill it,
because otherwise it can escape the virtual machine. In a
few cases the stub checks weren't good, e.g. if userspace
just tries to
mmap(0x100000 - 0x1000, 0x3000, ...)
it could succeed to get a new private/anonymous mapping
replacing the stubs. Fix this by checking everywhere, and
checking for _overlap_, not just direct changes.
Cc: stable@vger.kernel.org
Fixes: 3963333fe6 ("uml: cover stubs with a VMA")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since we're basically debugging the userspace (it runs in ptrace)
it's useful to dump out the registers - but they're not readable,
so if something goes wrong it's hard to say what. Print the names
of registers in the register dump so it's easier to look at.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This collects all of them together and makes it possible to
e.g. exclude it from slub debugging.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
powerpc was the last provider of arch_remap() and the last
user of mm-arch-hooks.h.
Since commit 526a9c4a72 ("powerpc/vdso: Provide vdso_remap()"),
arch_remap() hence mm-arch-hooks.h are not used anymore.
Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Richard Weinberger <richard@nod.at>
There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
With all the IRQ machinery being in place, we can allow virtio
devices to additionally be configured as wakeup sources, in
which case basically any interrupt from them wakes us up. Note
that this requires a call FD because the VQs are all disabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Migrated to libperf in:
4b247fa731 ("libperf: Adopt xyarray class from perf")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210212043803.365993-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In external time-travel mode, where time is controlled via the
controller application socket, interrupt handling is a little
tricky. For example on virtio, the following happens:
* we receive a message (that requires an ACK) on the vhost-user socket
* we add a time-travel event to handle the interrupt
(this causes communication on the time socket)
* we ACK the original vhost-user message
* we then handle the interrupt once the event is triggered
This protocol ensures that the sender of the interrupt only continues
to run in the simulation when the time-travel event has been added.
So far, this was only done in the virtio driver, but it was actually
wrong, because only virtqueue interrupts were handled this way, and
config change interrupts were handled immediately. Additionally, the
messages were actually handled in the real Linux interrupt handler,
but Linux interrupt handlers are part of the simulation and shouldn't
run while there's no time event.
To really do this properly and only handle all kinds of interrupts in
the time-travel event when we are scheduled to run in the simulation,
rework this to plug in to the lower interrupt layers in UML directly:
Add a um_request_irq_tt() function that let's a time-travel aware
driver request an interrupt with an additional timetravel_handler()
that is called outside of the context of the simulation, to handle
the message only. It then adds an event to the time-travel calendar
if necessary, and no "real" Linux code runs outside of the time
simulation.
This also hooks in with suspend/resume properly now, since this new
timetravel_handler() can run while Linux is suspended and interrupts
are disabled, and decide to wake up (or not) the system based on the
message it received. Importantly in this case, it ACKs the message
before the system even resumes and interrupts are re-enabled, thus
allowing the simulation to progress properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If the system is suspended, the device shouldn't be able to send
anything to it. Disable virtqueues in suspend to simulate this,
and as we might be only using s2idle (kernel services are still
on), prevent sending anything on them as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If we have a message without payload, we call full_read() with
len set to 0, which causes it to return -ECONNRESET. Catch this
case and explicitly return 0 for it so we can actually use the
zero-size config-changed message.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
There's no 'simtime' device, because implementing that through
virtio was just too much complexity. Clean up the comment that
still refers to it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This patch adds a "void *owner" member. The existing
bpf_tcp_ca test will ensure the bpf_cubic.o and bpf_dctcp.o
can be loaded.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210212021037.267278-1-kafai@fb.com
When libbpf initializes the kernel's struct_ops in
"bpf_map__init_kern_struct_ops()", it enforces all
pointer types must be a function pointer and rejects
others. It turns out to be too strict. For example,
when directly using "struct tcp_congestion_ops" from vmlinux.h,
it has a "struct module *owner" member and it is set to NULL
in a bpf_tcp_cc.o.
Instead, it only needs to ensure the member is a function
pointer if it has been set (relocated) to a bpf-prog.
This patch moves the "btf_is_func_proto(kern_mtype)" check
after the existing "if (!prog) { continue; }". The original debug
message in "if (!prog) { continue; }" is also removed since it is
no longer valid. Beside, there is a later debug message to tell
which function pointer is set.
The "btf_is_func_proto(mtype)" has already been guaranteed
in "bpf_object__collect_st_ops_relos()" which has been run
before "bpf_map__init_kern_struct_ops()". Thus, this check
is removed.
v2:
- Remove outdated debug message (Andrii)
Remove because there is a later debug message to tell
which function pointer is set.
- Following mtype->type is no longer needed. Remove:
"skip_mods_and_typedefs(btf, mtype->type, &mtype_id)"
- Do "if (!prog)" test before skip_mods_and_typedefs.
Fixes: 590a008882 ("bpf: libbpf: Add STRUCT_OPS support")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210212021030.266932-1-kafai@fb.com
-----BEGIN PGP SIGNATURE-----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=y7ZL
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-02-12' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Revert of a patch from this release that caused a regression"
* tag 'io_uring-5.11-2021-02-12' of git://git.kernel.dk/linux-block:
Revert "io_uring: don't take fs for recvmsg/sendmsg"
We have the environments where usage of AF_INET is prohibited
(cgroup/sock_create returns EPERM for AF_INET). Let's use
AF_LOCAL instead of AF_INET, it should perfectly work with SIOCETHTOOL.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20210209221826.922940-1-sdf@google.com
ttm:
- page pool regression fix.
dp_mst:
- Don't report un-attached ports as connected
amdgpu:
- Blank screen fix
i915:
- Ensure Type-C FIA is powered when initializing
- Fix overlay frontbuffer tracking
sun4i:
- tcon1 sync polarity fix
- Always set HDMI clock rate
- Fix H6 HDMI PHY config
- Fix H6 max frequency
vc4:
- Fix buffer overflow
xlnx:
- Fix memory leak
-----BEGIN PGP SIGNATURE-----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=HSyG
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-02-12' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes for final, there is a ttm regression fix, dp-mst fix,
one amdgpu revert, two i915 fixes, and some misc fixes for sun4i,
xlnx, and vc4.
All pretty quiet and don't think we have any known outstanding
regressions.
ttm:
- page pool regression fix.
dp_mst:
- don't report un-attached ports as connected
amdgpu:
- blank screen fix
i915:
- ensure Type-C FIA is powered when initializing
- fix overlay frontbuffer tracking
sun4i:
- tcon1 sync polarity fix
- always set HDMI clock rate
- fix H6 HDMI PHY config
- fix H6 max frequency
vc4:
- fix buffer overflow
xlnx:
- fix memory leak"
* tag 'drm-fixes-2021-02-12' of git://anongit.freedesktop.org/drm/drm:
drm/ttm: make sure pool pages are cleared
drm/sun4i: dw-hdmi: Fix max. frequency for H6
drm/sun4i: Fix H6 HDMI PHY configuration
drm/sun4i: dw-hdmi: always set clock rate
drm/sun4i: tcon: set sync polarity for tcon1 channel
drm/i915: Fix overlay frontbuffer tracking
Revert "drm/amd/display: Update NV1x SR latency values"
drm/i915/tgl+: Make sure TypeC FIA is powered up when initializing it
drm/dp_mst: Don't report ports connected if nothing is attached to them
drm/xlnx: fix kmemleak by sending vblank_event in atomic_disable
drm/vc4: hvs: Fix buffer overflow with the dlist handling
It was reported that if an trace event was larger than a page
and was filtered, that it caused memory corruption. The reason
is that filtered events first go into a buffer to test the filter
before being written into the ring buffer. Unfortunately,
this write did not check the size.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYCaSHBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqOpAQCUSlZdBxLzs87zeHgXbkMudWvCYSbA
mndzddqtxPXlXwEAsRnO8BERyZnasEdXnJ98JJwQaFFYH0dBCA2pTU2onQc=
=NokV
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix buffer overflow in trace event filter.
It was reported that if an trace event was larger than a page and was
filtered, that it caused memory corruption. The reason is that
filtered events first go into a buffer to test the filter before being
written into the ring buffer. Unfortunately, this write did not check
the size"
* tag 'trace-v5.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Check length before giving out the filter buffer
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYCUrYAAKCRCAXGG7T9hj
voF2AP9x3wKo+kYAqlRQrrDBb/AoMezoJ3pFiqJ+1Lg4yK4N6AD+IQxHuIODBfgj
bK12hr5oE6S3e7tTaVWweWzys5UmWA4=
=zleO
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.11-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix for an issue introduced this development cycle: when
running as a Xen guest on Arm systems the kernel will hang during
boot"
* tag 'for-linus-5.11-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: Don't probe xenbus as part of an early initcall
I have a single fix this week:
* The removal of the GPIO reset method for the Ethernet phy on the
HiFive Unleashed. This returns to relying on the bootloader's phy
reset sequence, which we'll have to cintune doing until we can sort
out how to get the Linux phy driver to perform the special reset
dance required for this phy.
-----BEGIN PGP SIGNATURE-----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=Oqf2
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"A single fix this week: the removal of the GPIO reset method for the
Ethernet phy on the HiFive Unleashed.
This returns to relying on the bootloader's phy reset sequence, which
we'll have to continue doing until we can sort out how to get the
Linux phy driver to perform the special reset dance required for this
phy"
* tag 'riscv-for-linus-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "dts: phy: add GPIO number and active state used for phy reset"
write.
-----BEGIN PGP SIGNATURE-----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=HYVs
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix PTRACE_PEEKMTETAGS access to an mmapped region before the first
write"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page
Invalid req->flags are tolerated by free/put well, avoid this dancing
needlessly presetting it to zero, and then not even resetting but
modifying it, i.e. "|=".
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Indirectly io_req_find_next() is called for every request, optimise the
check by testing flags as it was long before -- __io_req_find_next()
tolerates false-positives well (i.e. link==NULL), and those should be
really rare.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sq_thread_acquire_mm_files() can find a PF_EXITING task only when
it's called from task_work context. Don't check it in all other cases,
that are when we're in io_uring_enter().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Output of ixgbe_rx_offset() is based on ethtool's priv flag setting, which
when changed, causes PF reset (disables napi, frees irqs, loads
different Rx mem model, etc.). This means that within napi its result is
constant and there is no reason to call it per each processed frame.
Add new 'rx_offset' field to ixgbe_ring that is meant to hold the
ixgbe_rx_offset() result and use it within ixgbe_clean_rx_irq().
Furthermore, use it within ixgbe_alloc_mapped_page().
Last but not least, un-inline the function of interest as it lives in .c
file so let compiler do the decision about the inlining.
Reviewed-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Output of ice_rx_offset() is based on ethtool's priv flag setting, which
when changed, causes PF reset (disables napi, frees irqs, loads
different Rx mem model, etc.). This means that within napi its result is
constant and there is no reason to call it per each processed frame.
Add new 'rx_offset' field to ice_ring that is meant to hold the
ice_rx_offset() result and use it within ice_clean_rx_irq().
Furthermore, use it within ice_alloc_mapped_page().
Reviewed-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Output of i40e_rx_offset() is based on ethtool's priv flag setting,
which when changed, causes PF reset (disables napi, frees irqs, loads
different Rx mem model, etc.). This means that within napi its result is
constant and there is no reason to call it per each processed frame.
Add new 'rx_offset' field to i40e_ring that is meant to hold the
i40e_rx_offset() result and use it within i40e_clean_rx_irq().
Furthermore, use it within i40e_alloc_mapped_page().
Last but not least, un-inline the function of interest so that compiler
makes the decision about inlining as it lives in .c file.
Reviewed-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fold the count decrement into the while-statement.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Whole zero-copy variant of clean Rx IRQ is executed when xsk_pool is
attached to rx_ring and it can happen only when XDP program is present
on interface. Therefore it is safe to assume that program is always
!NULL and there is no need for checking it in ice_run_xdp_zc.
Reviewed-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
dev_validate_mtu checks that mtu value specified by user is not less
than min mtu and not greater than max allowed mtu. It is being done
before calling the ndo_change_mtu exposed by driver, so remove these
redundant checks in ice_change_mtu.
Reviewed-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Similar thing has been done in i40e, as there is no real need for having
the sk_buff pointer in each rx_buf. Non-eop frames can be simply handled
on that pointer moved upwards to rx_ring.
Reviewed-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There's no need for 'result' variable, we can directly return the
internal status based on action returned by xdp prog.
Reviewed-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e_is_non_eop had a leftover comment and unused skb argument which was
used for placing the skb onto rx_buf in case when current buffer was
non-eop one. This is not relevant anymore as commit e72e56597b
("i40e/i40evf: Moves skb from i40e_rx_buffer to i40e_ring") pulled the
non-complete skb handling out of rx_bufs up to rx_ring. Therefore,
let's adjust the function arguments that i40e_is_non_eop takes.
Furthermore, since there is already a function responsible for bumping
the ntc, make use of that and drop that logic from i40e_is_non_eop so
that the scope of this function is limited to what the name actually
states.
Reviewed-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e_cleanup_headers has a statement about check against skb being
linear or not which is not relevant anymore, so let's remove it.
Same case for i40e_can_reuse_rx_page, it references things that are not
present there anymore.
Reviewed-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Net core handles the case where netdev has no xdp prog attached and
current prog is NULL. Therefore, remove such check within
i40e_xdp_setup.
Reviewed-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
