driver_create_groups doesn't seem to have ever existed. Change its
mention in a printk to 'driver_add_groups'.
Signed-off-by: Joe Pater <02joepater06@gmail.com>
Link: https://lore.kernel.org/r/20210110145442.15301-1-02joepater06@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested by Paolo & Greg, add 'events' device attribute that can be
used to limit which capabilities the driver uses.
Finally, the pvpanic guest driver works by the limitation of both
device capability and user setting.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20210110115358.79100-3-pizhenwei@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to pvpanic spec:
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/specs/pvpanic.txt
The guest should determine pvpanic capability by RDPT, so initialize
capability during device probing. There is no need to register panic
notifier callback function if no events supported.
Before sending event to host side, check capability firstly.
Suggested by Greg KH, use sysfs to expose capability to user space,
also add new sysfs attribute in document.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20210110115358.79100-2-pizhenwei@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not attempt to stop the streaming if the stream is not running.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
request_fd is validated under media_request_get_by_fd() just below this
check. Thus remove it.
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Print capabilities field from struct v4l2_create_buffers for better
debugging.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It's often the case that we would write or read a particular field
in register. With the current soc_component apis, reading a particular
field in register would involve first read the register and then
perform shift operations.
Ex:
to read from a field mask of 0xf0
val = snd_soc_component_read(component, reg);
field = ((val & 0xf0) >> 0x4);
This is sometimes prone to errors and code become less readable!
With this new api we could just do
field = snd_soc_component_read_field(component, reg, 0xf0);
this makes it bit simple, easy to write and less error prone!
This also applies to writing!
There are various places in kernel which provides such field interfaces
however soc_component seems to be missing this.
This patch is inspired by FIELD_GET/FIELD_PREP macros in include/linux/bitfield.h
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210126171749.1863-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enabling DMI L1 for capture streams could result in xruns during
pause/release. As pause/release is not a valid scenario for trace,
we can safely enable DMI L1 for it.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210127020737.1088960-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DMI L1 entry is currently disabled whenever any capture stream is
opened to prevent xruns during pause/release. But, in
order to maximise power savings for the wake-on-voice usecase,
DMI L1 entry should be enabled for D0i3-compatible capture streams.
Introduce a new field, flags in struct sof_intel_hda_stream
that stores whether a stream is dmi_l1_compatible. All playback streams,
and D0i3-compatible capture streams are DMI L1 compatible.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210127020737.1088960-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 507d664450 ("arm64: mm: Remove unused header file") removed
a bunch of apparently "unused" header inclusions from our mm/mmap.c
implementation, but in doing so introduced the following warning when
building with W=1:
>> arch/arm64/mm/mmap.c:17:5: warning: no previous prototype for 'valid_phys_addr_range' [-Wmissing-prototypes]
17 | int valid_phys_addr_range(phys_addr_t addr, size_t size)
| ^~~~~~~~~~~~~~~~~~~~~
>> arch/arm64/mm/mmap.c:36:5: warning: no previous prototype for 'valid_mmap_phys_addr_range' [-Wmissing-prototypes]
36 | int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Add back the linux/io.h header inclusion to pull in the missing
prototypes.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202101271438.V9TmBC31-lkp@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
When DEBUG is defined this error occurs
drivers/media/platform/pxa_camera.c:1410:7: error:
‘i’ undeclared (first use in this function)
for (i = 0; i < vb->num_planes; i++)
^
The variable 'i' is missing, so declare it.
Fixes: 6f28435d1c ("[media] media: platform: pxa_camera: trivial move of functions")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We now support user to set erase page size, and use do_div between len
and erase size to determine the reasonableness for the erase size.
However, do_div is a macro and will overwrite the value of len. Which
results a mtd device with unexcepted size. Fix it by use div_u64_rem.
Fixes: ffad560394 ("mtd: phram: Allow the user to set the erase page size.")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210125124936.651812-1-yangerkun@huawei.com
When DEBUG is defined this error occurs
drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c:306:41:
error: ‘i’ undeclared (first use in this function)
mtk_v4l2_debug(2, "reg[%d] base=0x%p", i, dev->reg_base[VENC_SYS]);
Reviewing the old line
mtk_v4l2_debug(2, "reg[%d] base=0x%p", i, dev->reg_base[i]);
All the i's need to be changed to VENC_SYS.
Fix a similar error for VENC_LT_SYS.
Fixes: 0dc4b32861 ("media: mtk-vcodec: venc: support SCP firmware")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pointer eb is being assigned a value that is never read, the assignment
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200911102321.22515-1-colin.king@canonical.com
This function looks like a realloc.
However, if 'risc->cpu != NULL', the memory will be freed, but never
reallocated with the bigger 'size'.
Explicitly set 'risc->cpu' to NULL, so that the reallocation is
correctly performed a few lines below.
[hverkuil: NULL != risc->cpu -> risc->cpu]
Fixes: 5ede94c705 ("[media] cx25821: remove bogus btcx_risc dependency)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The address mode is either 3 or 4 for the controller, which is configured
by the firmware and cannot be modified in the OS driver. Get the
firmware configuration and add address mode check in the .supports_op()
to block invalid operations.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1611740450-47975-3-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF firmware and topology files are not distributed via
linux-firmware. To help debugging cases where correct firmware is
not installed, print a pointer to the official upstream repository
for Sound Open Firmware releases.
BugLink: https://github.com/thesofproject/sof/issues/3665
Reported-by: Bruce Perens <bruce@perens.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Marc Herbert <marc.herbert@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20210127122358.1014458-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
tgl_3_in_1_default link topology may be used by both TGL-LP and TGL-H.
Let's remove the sof_fw_filename setting in struct snd_soc_acpi_mach
and use the default_fw_filename setting in struct sof_dev_desc.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210125070500.807474-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The old code always uses sof_fw_filename in struct snd_soc_acpi_mach
as the firmware name. However, firmware name should depend on the platform
instead of the machine. For example, different machines may use the same
soundwire link topology, but they are using the different firmware. In this
case, it's hard to determine in struct snd_soc_acpi_mach which firmware it
should use.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210125070500.807474-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A const prefix was put wrongly in the middle at the code refactoring
commit 932eaf7c79 ("ASoC: sh: siu_pcm: remove snd_pcm_ops"), which
leads to a build error as:
sound/soc/sh/siu_pcm.c:546:8: error: expected '{' before 'const'
Also, another inconsistency is that the declaration of siu_component
misses the const prefix.
This patch corrects both failures.
Fixes: 932eaf7c79 ("ASoC: sh: siu_pcm: remove snd_pcm_ops")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210126154702.3974-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210122114358.39299-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Until now, we have already used the tlb operations from iommu framework,
then the tlb operations for v7s can be removed.
Correspondingly, Switch the paramenter "cookie" to the internal structure.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-8-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In current iommu_unmap, this code is:
iommu_iotlb_gather_init(&iotlb_gather);
ret = __iommu_unmap(domain, iova, size, &iotlb_gather);
iommu_iotlb_sync(domain, &iotlb_gather);
We could gather the whole iova range in __iommu_unmap, and then do tlb
synchronization in the iommu_iotlb_sync.
This patch implement this, Gather the range in mtk_iommu_unmap.
then iommu_iotlb_sync call tlb synchronization for the gathered iova range.
we don't call iommu_iotlb_gather_add_page since our tlb synchronization
could be regardless of granule size.
In this way, gather->start is impossible ULONG_MAX, remove the checking.
This patch aims to do tlb synchronization *once* in the iommu_unmap.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-7-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
This patch allows io_pgtable_tlb ops could be null since the IOMMU drivers
may use the tlb ops from iommu framework.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-6-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently gather->end is "unsigned long" which may be overflow in
arch32 in the corner case: 0xfff00000 + 0x100000(iova + size).
Although it doesn't affect the size(end - start), it affects the checking
"gather->end < end"
This patch changes this "end" to the real end address
(end = start + size - 1). Correspondingly, update the length to
"end - start + 1".
Fixes: a7d20dc19d ("iommu: Introduce struct iommu_iotlb_gather for batching TLB flushes")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-5-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Remove IO_PGTABLE_QUIRK_TLBI_ON_MAP to avoid tlb sync for each a small
chunk memory, Use the new iotlb_sync_map to tlb_sync once for whole the
iova range of iommu_map.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-4-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
iotlb_sync_map allow IOMMU drivers tlb sync after completing the whole
mapping. This patch adds iova and size as the parameters in it. then the
IOMMU driver could flush tlb with the whole range once after iova mapping
to improve performance.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-3-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In the end of __iommu_map, It alway call iotlb_sync_map.
This patch moves iotlb_sync_map out from __iommu_map since it is
unnecessary to call this for each sg segment especially iotlb_sync_map
is flush tlb all currently. Add a little helper _iommu_map for this.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-2-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Address issue observed on real world system with suboptimal IORT table
where DMA masks of PCI devices would get set to 0 as result.
iort_dma_setup() would query the root complex'/named component IORT
entry for a DMA mask, and use that over the one the device has been
configured with earlier.
Ideally we want to use the minimum mask of what the IORT contains for
the root complex and what the device was configured with.
Fixes: 5ac65e8c89 ("ACPI/IORT: Support address size limit for root complexes")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20210122012419.95010-1-mdf@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A number of remote control drivers require the bitreverse
helper, and run into a link error when it is disabled:
arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_scancode':
img-ir-nec.c:(.text+0x10c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_filter':
img-ir-nec.c:(.text+0x2dc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/usb/cx231xx/cx231xx-input.o: in function `get_key_isdbt':
cx231xx-input.c:(.text+0x38c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/usb/em28xx/em28xx-input.o: in function `em28xx_get_key_em_haup':
em28xx-input.c:(.text+0x1704): undefined reference to `byte_rev_table'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We do not actually need speakup_tty and spk_ttyio_synth global
variables, the synth can store the pointer to the tty, and the tty
ldisc_data can store the pointer to the synth.
Along the way, we can clench the initialization of the synth and the
creation of the tty, so that tty is never NULL. Even if the device
disappears (e.g. USB unplug), the tty structure will still be there,
and we automatically stop speakup in the spk_ttyio_out error handler
but keep tty until the user cleans things up.
As a result, this simplifies locking a lot.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20210126222147.3848175-3-samuel.thibault@ens-lyon.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A master key change on a CCA card may cause an immediately
following request to derive an protected key from a secure
key to fail with error condition 8/2290. The recommendation
from firmware is to retry with 1 second sleep.
So now the low level cca functions return -EAGAIN when this
error condition is seen and the paes retry function will
evaluate the return value. Seeing EAGAIN and running in
process context results in trying to sleep for 1 s now.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Checking zdev->zbus for NULL in __zpci_event_availability() is
superfluous as it can never be NULL at this point. While harmless this
check causes smatch warnings because we later access zdev->zbus with
only having checked zdev != NULL which is sufficient.
The reason zdev->zbus can never be NULL is since with zdev != NULL given
we know the zdev came from get_zdev_by_fid() and thus the zpci_list.
Now on first glance at zpci_create_device() one may assume that there is
a window where the zdev is in the list without a zdev, however this
window can't overlap with __zpci_event_availability() as
zpci_create_device() either runs on the same kthread as part of
availability events, or during the initial CLP List PCI at which point
the __zpci_event_availability() is not yet called as zPCI is not yet
initialized.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This fixes the following warning:
CHECK linux/arch/s390/kernel/signal.c
linux/arch/s390/kernel/signal.c:465:6: warning: symbol 'arch_do_signal_or_restart' was not declared. Should it be static?
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Rename tape_3590_erp_succeded to tape_3590_erp_succeeded to fix a
spelling mistake in the function name.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20210118113222.71708-1-colin.king@canonical.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
