The pasid based IOTLB and devTLB invalidation code is duplicate in
several places. Consolidate them by using the common helpers.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210114085021.717041-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
hist_bins is an array of type __u32. Each entry represents
a 20 bit value. So mask out the unused bits.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
hist_bins is an array of type __u32. Each entry represent
a 20 bit fixed point value as documented inline.
The cast to u8 when setting the values is wrong. Remove it.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Each entry in the array is a 20 bits value composed of 16 bits unsigned
integer and 4 bits fractional part. So the type should change to __u32.
In addition add a documentation of how the measurements are done.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The DE2 display engine hardware takes physical addresses that do not
need PHYS_BASE subtracted. As a result, they should not be present
on the mbus driver match list. Remove them.
This was tested on the A83T, along with the patch allowing the DMA
range map to be non-NULL and restores a working display.
Fixes: b4bdc4fbf8 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210115175831.1184260-2-paul.kocialkowski@bootlin.com
Fixes the following W=1 kernel build warning(s):
drivers/thunderbolt/eeprom.c:19: warning: Function parameter or member 'sw' not described in 'tb_eeprom_ctl_write'
drivers/thunderbolt/eeprom.c:19: warning: Function parameter or member 'ctl' not described in 'tb_eeprom_ctl_write'
drivers/thunderbolt/eeprom.c:27: warning: Function parameter or member 'sw' not described in 'tb_eeprom_ctl_read'
drivers/thunderbolt/eeprom.c:27: warning: Function parameter or member 'ctl' not described in 'tb_eeprom_ctl_read'
drivers/thunderbolt/eeprom.c:27: warning: expecting prototype for tb_eeprom_ctl_write(). Prototype was for tb_eeprom_ctl_read() instead
drivers/thunderbolt/eeprom.c:43: warning: Function parameter or member 'sw' not described in 'tb_eeprom_active'
drivers/thunderbolt/eeprom.c:43: warning: Function parameter or member 'enable' not described in 'tb_eeprom_active'
drivers/thunderbolt/eeprom.c:73: warning: Function parameter or member 'sw' not described in 'tb_eeprom_transfer'
drivers/thunderbolt/eeprom.c:73: warning: Function parameter or member 'ctl' not described in 'tb_eeprom_transfer'
drivers/thunderbolt/eeprom.c:73: warning: Function parameter or member 'direction' not described in 'tb_eeprom_transfer'
drivers/thunderbolt/eeprom.c:97: warning: Function parameter or member 'sw' not described in 'tb_eeprom_out'
drivers/thunderbolt/eeprom.c:97: warning: Function parameter or member 'val' not described in 'tb_eeprom_out'
drivers/thunderbolt/eeprom.c:117: warning: Function parameter or member 'sw' not described in 'tb_eeprom_in'
drivers/thunderbolt/eeprom.c:117: warning: Function parameter or member 'val' not described in 'tb_eeprom_in'
drivers/thunderbolt/eeprom.c:138: warning: Function parameter or member 'sw' not described in 'tb_eeprom_get_drom_offset'
drivers/thunderbolt/eeprom.c:138: warning: Function parameter or member 'offset' not described in 'tb_eeprom_get_drom_offset'
drivers/thunderbolt/eeprom.c:170: warning: Function parameter or member 'sw' not described in 'tb_eeprom_read_n'
drivers/thunderbolt/eeprom.c:170: warning: Function parameter or member 'offset' not described in 'tb_eeprom_read_n'
drivers/thunderbolt/eeprom.c:170: warning: Function parameter or member 'val' not described in 'tb_eeprom_read_n'
drivers/thunderbolt/eeprom.c:170: warning: Function parameter or member 'count' not described in 'tb_eeprom_read_n'
drivers/thunderbolt/eeprom.c:383: warning: Function parameter or member 'sw' not described in 'tb_drom_parse_entries'
drivers/thunderbolt/eeprom.c:417: warning: Function parameter or member 'sw' not described in 'tb_drom_copy_efi'
drivers/thunderbolt/eeprom.c:417: warning: Function parameter or member 'size' not described in 'tb_drom_copy_efi'
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[ mw: Demote only static functions ]
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add the obvious compatible name to the existing RSB binding, and pair
it with the existing A23 fallback compatible string, as the devices are
compatible.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210127172500.13356-15-andre.przywara@arm.com
The Allwinner H616 adds a second EMAC clock register at offset 0x34, for
controlling the second EMAC in this chip.
Allow to extend the regmap in this case, to cover more than the current
4 bytes exported.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210127172500.13356-9-andre.przywara@arm.com
The H616 adds a second EMAC clock register. We don't know about the
exact SRAM properties yet, so this gets omitted for now.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210127172500.13356-8-andre.przywara@arm.com
This converts the resend_tasklet to use the new API in
commit 12cc923f1c ("tasklet: Introduce new initialization API")
The new API changes the argument passed to the callback function, but
fortunately the argument isn't used so it is straight forward to use
DECLARE_TASKLET() rather than DECLARE_TASKLET_OLD().
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210123182456.6521-1-esmil@mailme.dk
While the clocks are fairly similar to the H6, many differ in tiny
details, so a separate clock driver seems indicated.
Derived from the H6 clock driver, and adjusted according to the manual.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210127172500.13356-4-andre.przywara@arm.com
The clocks itself are identical to the H6 R-CCU, it's just that the H616
has not all of them implemented (or connected).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210127172500.13356-3-andre.przywara@arm.com
This code should return -ENOMEM if the kmalloc() fails but instead
it returns success.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 0f64478cbc ("USB: add USB serial mos7720 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/thunderbolt/ctl.c:38: warning: expecting prototype for struct tb_cfg. Prototype was for struct tb_ctl instead
drivers/thunderbolt/ctl.c:350: warning: Function parameter or member 'ctl' not described in 'tb_ctl_tx'
drivers/thunderbolt/ctl.c:350: warning: Function parameter or member 'data' not described in 'tb_ctl_tx'
drivers/thunderbolt/ctl.c:350: warning: Function parameter or member 'len' not described in 'tb_ctl_tx'
drivers/thunderbolt/ctl.c:350: warning: Function parameter or member 'type' not described in 'tb_ctl_tx'
drivers/thunderbolt/ctl.c:350: warning: expecting prototype for tb_cfg_tx(). Prototype was for tb_ctl_tx() instead
drivers/thunderbolt/ctl.c:383: warning: Function parameter or member 'ctl' not described in 'tb_ctl_handle_event'
drivers/thunderbolt/ctl.c:383: warning: Function parameter or member 'type' not described in 'tb_ctl_handle_event'
drivers/thunderbolt/ctl.c:383: warning: Function parameter or member 'pkg' not described in 'tb_ctl_handle_event'
drivers/thunderbolt/ctl.c:383: warning: Function parameter or member 'size' not described in 'tb_ctl_handle_event'
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[ mw: Demote only static functions ]
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Some i2c device driver indirectly uses I2C driver when it is now
being suspended. The i2c devices driver is suspended during the
NOIRQ phase and this cannot be changed due to other dependencies.
Therefore, we also need to move the suspend handling for the I2C
controller driver to the NOIRQ phase as well.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/thunderbolt/cap.c:189: warning: Function parameter or member 'sw' not described in 'tb_switch_find_cap'
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
... and take the error path if it fails.
Fixes the following W=1 kernel build warning(s):
drivers/thunderbolt/dma_port.c: In function ‘dma_port_flash_write_block’:
drivers/thunderbolt/dma_port.c:331:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Overlayfs's volatile option allows the user to bypass all forced sync calls
to the upperdir filesystem. This comes at the cost of safety. We can never
ensure that the user's data is intact, but we can make a best effort to
expose whether or not the data is likely to be in a bad state.
The best way to handle this in the time being is that if an overlayfs's
upperdir experiences an error after a volatile mount occurs, that error
will be returned on fsync, fdatasync, sync, and syncfs. This is
contradictory to the traditional behaviour of VFS which fails the call
once, and only raises an error if a subsequent fsync error has occurred,
and been raised by the filesystem.
One awkward aspect of the patch is that we have to manually set the
superblock's errseq_t after the sync_fs callback as opposed to just
returning an error from syncfs. This is because the call chain looks
something like this:
sys_syncfs ->
sync_filesystem ->
__sync_filesystem ->
/* The return value is ignored here
sb->s_op->sync_fs(sb)
_sync_blockdev
/* Where the VFS fetches the error to raise to userspace */
errseq_check_and_advance
Because of this we call errseq_set every time the sync_fs callback occurs.
Due to the nature of this seen / unseen dichotomy, if the upperdir is an
inconsistent state at the initial mount time, overlayfs will refuse to
mount, as overlayfs cannot get a snapshot of the upperdir's errseq that
will increment on error until the user calls syncfs.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Fixes: c86243b090 ("ovl: provide a mount option "volatile"")
Cc: stable@vger.kernel.org
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When inode has no listxattr op of its own (e.g. squashfs) vfs_listxattr
calls the LSM inode_listsecurity hooks to list the xattrs that LSMs will
intercept in inode_getxattr hooks.
When selinux LSM is installed but not initialized, it will list the
security.selinux xattr in inode_listsecurity, but will not intercept it
in inode_getxattr. This results in -ENODATA for a getxattr call for an
xattr returned by listxattr.
This situation was manifested as overlayfs failure to copy up lower
files from squashfs when selinux is built-in but not initialized,
because ovl_copy_xattr() iterates the lower inode xattrs by
vfs_listxattr() and vfs_getxattr().
ovl_copy_xattr() skips copy up of security labels that are indentified by
inode_copy_up_xattr LSM hooks, but it does that after vfs_getxattr().
Since we are not going to copy them, skip vfs_getxattr() of the security
labels.
Reported-by: Michael Labriola <michael.d.labriola@gmail.com>
Tested-by: Michael Labriola <michael.d.labriola@gmail.com>
Link: https://lore.kernel.org/linux-unionfs/2nv9d47zt7.fsf@aldarion.sourceruckus.org/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The function ovl_dir_real_file() currently uses the inode lock to serialize
writes to the od->upperfile field.
However, this function will get called by ovl_ioctl_set_flags(), which
utilizes the inode lock too. In this case ovl_dir_real_file() will try to
claim a lock that is owned by a function in its call stack, which won't get
released before ovl_dir_real_file() returns.
Fix by replacing the open coded compare and exchange by an explicit atomic
op.
Fixes: 61536bed21 ("ovl: support [S|G]ETFLAGS and FS[S|G]ETXATTR ioctls for directories")
Cc: stable@vger.kernel.org # v5.10
Reported-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a capability is stored on disk in v2 format cap_inode_getsecurity() will
currently return in v2 format unconditionally.
This is wrong: v2 cap should be equivalent to a v3 cap with zero rootid,
and so the same conversions performed on it.
If the rootid cannot be mapped, v3 is returned unconverted. Fix this so
that both v2 and v3 return -EOVERFLOW if the rootid (or the owner of the fs
user namespace in case of v2) cannot be mapped into the current user
namespace.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
The vfs_getxattr() in ovl_xattr_set() is used to check whether an xattr
exist on a lower layer file that is to be removed. If the xattr does not
exist, then no need to copy up the file.
This call of vfs_getxattr() wasn't wrapped in credential override, and this
is probably okay. But for consitency wrap this instance as well.
Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently there's no way to create an overlay filesystem outside of the
current user namespace. Make sure that if this assumption changes it
doesn't go unnoticed.
Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This may be just taste, but I think 'nmsgs' is way more readable than a
generic 'num' variable. Also, fix spaces around operators while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Don't use 'i' to carry data, make a specific variable for it. After the
move to memcpy recently, we can even remove 'i'.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Switch to use threaded interrupt context in order to avoid checking of
"are we in interrupt?" for the code that may sleep in the IRQ handler.
I2C doesn't require a very low interrupt-handling latency, hence this
change doesn't introduce any noticeable effects.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The zte zx platform is getting removed, so this driver is no
longer needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/clk/renesas/renesas-cpg-mssr.c:168: warning: Function parameter or member 'smstpcr_saved' not described in 'cpg_mssr_priv'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210126124540.3320214-12-lee.jones@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the obvious compatible name to the existing I2C binding, and pair
it with the existing A31 fallback compatible string, as the devices
are compatible.
On the way use enums to group all compatible devices together.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add functions to support ND_CMD_GET_CONFIG_SIZE, ND_CMD_SET_CONFIG_DATA and
ND_CMD_GET_CONFIG_DATA.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Link: https://lore.kernel.org/r/20201222042240.2983755-7-santosh@fossix.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The bus config array is used to hold the regions and the respective
mappings. This config based interface enables to change the
dimm/region/namespace layouts easily.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Link: https://lore.kernel.org/r/20201222042240.2983755-6-santosh@fossix.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A config array is used to hold the dimms for each bus. These dimms are
registered with nvdimm, and new nvdimms are created on the buses.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Link: https://lore.kernel.org/r/20201222042240.2983755-4-santosh@fossix.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Since this module is written to be platform agnostic, the module is made
part of the PAPR_FAMILY. ndctl identifies the family using the compatible
string inside of_node dir-entry.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Link: https://lore.kernel.org/r/20201222042240.2983755-3-santosh@fossix.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The current test module cannot be used for testing platforms (make check)
that do not have support for NFIT. In order to get the ndctl tests working,
we need a module which can emulate NVDIMM devices without relying on
ACPI/NFIT.
The aim of this proposed module is to implement a similar functionality to
the existing module but without the ACPI dependencies.
This RFC series is split into reviewable and compilable chunks.
This patch adds a new driver and registers two nvdimm bus needed for ndctl
make check.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Link: https://lore.kernel.org/r/20201222042240.2983755-2-santosh@fossix.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Legacy pmem namespaces lost support for the "resource" attribute when
the code was cleaned up to put the permission visibility in the
declaration. Restore this by listing 'resource' in the default
attributes.
A new ndctl regression test for pfn_to_online_page() corner cases builds
on this fix.
Fixes: bfd2e91406 ("libnvdimm: Simplify root read-only definition for the 'resource' attribute")
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/161052334995.1805594.12054873528154362921.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Recent commit 255cbecfe0 modified struct kvm_vcpu_arch to make
'cpuid_entries' a pointer to an array of kvm_cpuid_entry2 entries
rather than embedding the array in the struct. KVM_SET_CPUID and
KVM_SET_CPUID2 were updated accordingly, but KVM_GET_CPUID2 was missed.
As a result, KVM_GET_CPUID2 currently returns random fields from struct
kvm_vcpu_arch to userspace rather than the expected CPUID values. Fix
this by treating 'cpuid_entries' as a pointer when copying its
contents to userspace buffer.
Fixes: 255cbecfe0 ("KVM: x86: allocate vcpu->arch.cpuid_entries dynamically")
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com.com>
Message-Id: <20210128024451.1816770-1-michael.roth@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a memory leak in mt76_add_fragment routine returning the buffer
to the page_frag_cache when we receive a new fragment and the
skb_shared_info frag array is full.
Fixes: b102f0c522 ("mt76: fix array overflow on receiving too many fragments for a packet")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/4f9dd73407da88b2a552517ce8db242d86bf4d5c.1611616130.git.lorenzo@kernel.org
When CONFIG_ATH9K is built-in but LED support is in a loadable
module, both ath9k drivers fails to link:
x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_deinit_leds':
gpio.c:(.text+0x36): undefined reference to `led_classdev_unregister'
x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_init_leds':
gpio.c:(.text+0x179): undefined reference to `led_classdev_register_ext'
The problem is that the 'imply' keyword does not enforce any dependency
but is only a weak hint to Kconfig to enable another symbol from a
defconfig file.
Change imply to a 'depends on LEDS_CLASS' that prevents the incorrect
configuration but still allows building the driver without LED support.
The 'select MAC80211_LEDS' is now ensures that the LED support is
actually used if it is present, and the added Kconfig dependency
on MAC80211_LEDS ensures that it cannot be enabled manually when it
has no effect.
Fixes: 197f466e93 ("ath9k_htc: Do not select MAC80211_LEDS by default")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210125113654.2408057-1-arnd@kernel.org
Failed to transmit wmi management frames:
[84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full
[84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28
[84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28
[84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28
This issue is caused by race condition between skb_dequeue and
__skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a
different lock: ar->data_lock vs list->lock, the result is no protection.
So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt()
running concurrently on different CPUs, there appear to be a rare corner
cases when the queue length is 1,
CPUx (skb_deuque) CPUy (__skb_queue_tail)
next=list
prev=list
struct sk_buff *skb = skb_peek(list); WRITE_ONCE(newsk->next, next);
WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev);
next = skb->next; WRITE_ONCE(next->prev, newsk);
prev = skb->prev; WRITE_ONCE(prev->next, newsk);
skb->next = skb->prev = NULL; list->qlen++;
WRITE_ONCE(next->prev, prev);
WRITE_ONCE(prev->next, next);
If the instruction ‘next = skb->next’ is executed before
‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the
old ‘next’ pointer, but the length is still added by one. The final
result is the length of the queue will reach the maximum value but
the queue is empty.
So remove ar->data_lock, and use 'skb_queue_tail' instead of
'__skb_queue_tail' to prevent the potential race condition. Also switch
to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org
When connect to an AP with WPA mode, ath10k need to set need_ptk_4_way to
firmware in WMI_PEER_ASSOC_CMD, then the data path is disallow in
firmware, it will be allowed untill firmware finish the 4 way handshake.
It failed with a test case with below steps:
1. configure AP with WPA mode with ssid1 SimpleConnect_a_orbvt_ch1,
bssid1 and channel 1.
2. connect to ssid1 and ping success.
3. wait 10 seconds which is less than
IEEE80211_SCAN_RESULT_EXPIRE(30 seconds).
4. configure AP with OPEN mode with ssid2 SimpleConnect_b_z3a00_ch1,
but use same bssid1 and channel 1 of step 1.
5. disconnect ssid1.
6. connect to ssid2 and ping fail.
Fail reason:
When run step 6, ath10k_peer_assoc_h_crypto() called cfg80211_get_bss()
with bssid and chan info, but ssid1 and ssid2 have the same bssid and
channel, then there have 2 entry for ssid1 and ssid2 in cfg80211. The
ssid1's order is before ssid2 in bss_list, and ssid1's age is less than
the expire time which is IEEE80211_SCAN_RESULT_EXPIRE(30 seconds). Then
ssid1's entry is selected and ath10k_peer_assoc_h_crypto() parsed it and
get the rsnie and then need_ptk_4_way is set to firmware, so data path
is disallowed and it will not receive 4 way handshake for OPEN mode,
so ping fail in step 6.
This patch is to pass the ssid info to cfg80211_get_bss() as same as
cfg80211_mlme_assoc() and cfg80211_mlme_auth(), then it will find the
correct bss entry in above test case, then case success.
For AP mode, the ssid info is filled in ieee80211_start_ap(), for STATION
mode, it is filled in ieee80211_mgd_assoc(). Tested for both AP/STATION
mode with QCA6174 hw3.2 PCI, it is success start/connect/ping for
WPA/OPEN mode.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607312195-3583-3-git-send-email-wgong@codeaurora.org
ath10k assigns ath10k_mac_set_sar_specs to ath10k_ops, and
this function is called when user space application calls
NL80211_CMD_SET_SAR_SPECS. ath10k also registers SAR type,
and supported frequency ranges to wiphy so user space can
query SAR capabilities.
This SAR power limitation is compared to regulatory txpower
and selects the minimal one to set when station is connected.
Otherwise, it delays until the station is connected. If the
station is disconnected, it returns to regulatory txpower.
This feature is controlled by hw parameter: dynamic_sar_support.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Abhishek Kumar <kuabhs@chromium.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201203103728.3034-4-cjhuang@codeaurora.org
The HDCP 1.4 spec does not require the QUERY_STREAM_ENCRYPTION_STATUS
check, it was always a nice-to-have. After deploying this across various
devices, we've determined that some MST bridge chips do not properly
support this call for HDCP 1.4 (namely Synaptics and Realtek).
I had considered creating a quirk for this, but I think it's more
prudent to just disable the check entirely since I don't have an idea
how widespread support is.
Changes in v2:
-Rebased on -tip
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210106223909.34476-1-sean@poorly.run #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20210121172620.33066-1-sean@poorly.run
This reverts commit 327953e9af.
You cannot use 'boolean' since commit b92d804a51 ("kconfig: drop
'boolean' keyword").
This check is no longer needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Joe Perches <joe@perches.com>
Otherwise build fails if the headers are not in the default location. While at
it also ask pkg-config for the libs, with fallback to the existing value.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org # 5.6.x
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
