Local receiver mask SR_1000T_LOCAL_RX_STATUS not in use in i225 device
and could be removed
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use the strscpy method instead of strlcpy method.
See: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr
_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Extend reporting of NVM image version to include the gPHY (i225 PHY)
firmware version.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Expose the NVM map version via drvinfo in ethtool
NVM image version is reported as firmware version for i225 device
Minor typo fix - remove space
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This counter counts the number of good (non-erred) packets
transmitted sent by the host.
A good transmit packet is considered one that is 64 or more bytes
in length (from <Destination Address> through <CRC>,
inclusively) in length
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Multiple Tx Data Read Requests is hardware pipeline feature and
is not controlled by software
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i225 device not supported and do not plan to support
configuration of fw version string for ethtool
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
valid_led_default function pointer not in use and can
be removed from nvm_operations structure.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Brian Vazquez says:
====================
net: use INDIRECT_CALL in some dst_ops
This patch series uses the INDIRECT_CALL wrappers in some dst_ops
functions to mitigate retpoline costs. Benefits depend on the
platform as described below.
Background: The kernel rewrites the retpoline code at
__x86_indirect_thunk_r11 depending on the CPU's requirements.
The INDIRECT_CALL wrappers provide hints on possible targets and
save the retpoline overhead using a direct call in case the
target matches one of the hints.
The retpoline overhead for the following three cases has been
measured by Luigi Rizzo in microbenchmarks, using CPU performance
counters, and cover reasonably well the range of possible retpoline
overheads compared to a plain indirect call (in equal conditions,
specifically with predicted branch, hot cache):
- just "jmp *(%r11)" on modern platforms like Intel Cascadelake.
In this case the overhead is just 2 clock cycles:
- "lfence; jmp *(%r11)" on e.g. some recent AMD CPUs.
In this case the lfence is blocked until pending reads complete,
so the actual overhead depends on previous instructions.
The best case we have measured 15 clock cycles of overhead.
- worst case, e.g. skylake, the full retpoline is used
__x86_indirect_thunk_r11: call set_u_target
capture_speculation: pause
lfence
jmp capture_speculation
.align 16
set_up_target: mov %r11, (%rsp)
ret
In this case the overhead has been measured in 35-40 clock cycles.
The actual time saved hence depends on the platform and current
clock speed (which varies heavily, especially when C-states are active).
Also note that actual benefit might be lower than expected if the
longer retpoline overlaps with some pending memory read.
MEASUREMENTS:
The INDIRECT_CALL wrappers in this patchset involve the processing
of incoming SYN and generation of syncookies. Hence, the test has been
run by configuring a receiving host with a single NIC rx queue, disabling
RPS and RFS so that all processing occurs on the same core.
An external source generates SYN fast enough to saturate the receiving CPU.
We ran two sets of experiments, with and without the dst_output patch,
comparing the number of syncookies generated over a 20s period
in multiple runs.
Assuming the CPU is saturated, the time per packet is
t = number_of_packets/total_time
and if the two datasets have statistically meaningful difference,
the difference in times between the two cases gives an estimate
of the benefits from one INDIRECT_CALL.
Here are the experimental results:
Skylake Syncookies over 20s (5 tests)
---------------------------------------------------
indirect 9166325 9182023 9170093 9134014 9171082
retpoline 9099308 9126350 9154841 9056377 9122376
Computing the stats on the ns_pkt = 20e6/total_packets gives the following:
$ ministat -c 95 -w 70 /tmp/sk-indirect /tmp/sk-retp
x /tmp/sk-indirect
+ /tmp/sk-retp
+----------------------------------------------------------------------+
|x xx x + x + + + +|
||______M__A_______|_|____________M_____A___________________| |
+----------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 2.17817e-06 2.18962e-06 2.181e-06 2.182292e-06 4.3252133e-09
+ 5 2.18464e-06 2.20839e-06 2.19241e-06 2.194974e-06 8.8695958e-09
Difference at 95.0% confidence
1.2682e-08 +/- 1.01766e-08
0.581132% +/- 0.466326%
(Student's t, pooled s = 6.97772e-09)
This suggests a difference of 13ns +/- 10ns
Our expectation from microbenchmarks was 35-40 cycles per call,
but part of the gains may be eaten by stalls from pending memory reads.
For Cascadelake:
Cascadelake Syncookies over 20s (5 tests)
---------------------------------------------------------
indirect 10339797 10297547 10366826 10378891 10384854
retpoline 10332674 10366805 10320374 10334272 10374087
Computing the stats on the ns_pkt = 20e6/total_packets gives no
meaningful difference even at just 80% (this was expected):
$ ministat -c 80 -w 70 /tmp/cl-indirect /tmp/cl-retp
x /tmp/cl-indirect
+ /tmp/cl-retp
+----------------------------------------------------------------------+
| x x + * x + + + x|
||______________|_M_________A_____A_______M________|___| |
+----------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 1.92588e-06 1.94221e-06 1.92923e-06 1.931716e-06 6.6936746e-09
+ 5 1.92788e-06 1.93791e-06 1.93531e-06 1.933188e-06 4.3734106e-09
No difference proven at 80.0% confidence
====================
Link: https://lore.kernel.org/r/20210201174132.3534118-1-brianvv@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch avoids the indirect call for the common case:
ip6_dst_check and ipv4_dst_check
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch avoids the indirect call for the common case:
ip6_mtu and ipv4_mtu
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch avoids the indirect call for the common case:
ip6_output and ip_output
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch avoids the indirect call for the common case:
ip_local_deliver and ip6_input
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This converts the driver to use the new tasklet API introduced in
commit 12cc923f1c ("tasklet: Introduce new initialization API")
It is unfortunate that we need to add a pointer to the driver context to
get back to the usbnet device, but the space will be reclaimed once
there are no more users of the old API left and we can remove the data
value and flag from the tasklet struct.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20210130234637.26505-1-kernel@esmil.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Added "ckpt_thread_ioprio" sysfs node to give a way to change checkpoint
merge daemon's io priority. Its default value is "be,3", which means
"BE" I/O class and I/O priority "3". We can select the class between "rt"
and "be", and set the I/O priority within valid range of it.
"," delimiter is necessary in between I/O class and priority number.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge",
which creates a kernel daemon and makes it to merge concurrent checkpoint
requests as much as possible to eliminate redundant checkpoint issues. Plus,
we can eliminate the sluggish issue caused by slow checkpoint operation
when the checkpoint is done in a process context in a cgroup having
low i/o budget and cpu shares. To make this do better, we set the
default i/o priority of the kernel daemon to "3", to give one higher
priority than other kernel threads. The below verification result
explains this.
The basic idea has come from https://opensource.samsung.com.
[Verification]
Android Pixel Device(ARM64, 7GB RAM, 256GB UFS)
Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20)
Set "strict_guarantees" to "1" in BFQ tunables
In "fg" cgroup,
- thread A => trigger 1000 checkpoint operations
"for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1;
done"
- thread B => gererating async. I/O
"fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1
--filename=test_img --name=test"
In "bg" cgroup,
- thread C => trigger repeated checkpoint operations
"echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file;
fsync test_dir2; done"
We've measured thread A's execution time.
[ w/o patch ]
Elapsed Time: Avg. 68 seconds
[ w/ patch ]
Elapsed Time: Avg. 48 seconds
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
[Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds support to verifier tests to check for a succession of
verifier log messages on program load failure. This makes the errstr
field work uniformly across REJECT and VERBOSE_ACCEPT checks.
This patch also increases the maximum size of a message in the series of
messages to test from 80 chars to 200 chars. This is in order to keep
existing tests working, which sometimes test for messages larger than 80
chars (which was accepted in the REJECT case, when testing for a single
message, but not in the VERBOSE_ACCEPT case, when testing for possibly
multiple messages).
And example of such a long, checked message is in bounds.c: "R1 has
unknown scalar with mixed signed bounds, pointer arithmetic with it
prohibited for !root"
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210130220150.59305-1-andreimatei1@gmail.com
The example and filename use 'adi,ad5686', but the schema doesn't
document it. The AD5686 is also a SPI interface variant while all the
documented variants have an I2C interface. So let's update all the
references to AD5686 to AD5696.
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Michael Auchter <michael.auchter@ni.com>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210202215503.114113-1-robh@kernel.org
Since I wrote the below patch if you run a debug kernel you can a
dma debug warning like:
nouveau 0000:1f:00.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000016e012000] [size=4096 bytes]
The old nouveau code wasn't consolidate the pages like the ttm code,
but the dma-debug expects the sync code to give it the same base/range
pairs as the allocator.
Fix the nouveau sync code to consolidate pages before calling the
sync code.
Fixes: bd549d35b4 ("nouveau: use ttm populate mapping functions. (v2)")
Reported-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/417588/
Add a macro cond_yield that branches to a specified label when called if
the TIF_NEED_RESCHED flag is set and decreasing the preempt count would
make the task preemptible again, resulting in a schedule to occur. This
can be used by kernel mode SIMD code that keeps a lot of state in SIMD
registers, which would make chunking the input in order to perform the
cond_resched() check from C code disproportionately costly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210203113626.220151-2-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
On 32-bit architecture, roundup_pow_of_two() can return 0 when the argument
has upper most bit set due to resulting 1UL << 32. Add a check for this case.
Fixes: d5a3b1f691 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210127063653.3576-1-minhquangbui99@gmail.com
Add TRAMP_SWAPPER_OFFSET and use that instead of hardcoding
the offset between swapper_pg_dir and tramp_pg_dir.
Then use TRAMP_SWAPPER_OFFSET to assert that the offset is
correct at link time.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210202123658.22308-3-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add RESERVED_SWAPPER_OFFSET and use that instead of hardcoding
the offset between swapper_pg_dir and reserved_pg_dir.
Then use RESERVED_SWAPPER_OFFSET to assert that the offset is
correct at link time.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210202123658.22308-2-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
- Make sure to set a default console, otherwise ttynull is selected.
- Revert initial ARCH_HAS_SET_MEMORY support, this needs more work.
- Fix a regression due to ubd refactoring.
- Various small fixes.
-----BEGIN PGP SIGNATURE-----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=AuP1
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger:
- Make sure to set a default console, otherwise ttynull is selected
- Revert initial ARCH_HAS_SET_MEMORY support, this needs more work
- Fix a regression due to ubd refactoring
- Various small fixes
* tag 'for-linus-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: time: fix initialization in time-travel mode
um: fix os_idle_sleep() to not hang
Revert "um: support some of ARCH_HAS_SET_MEMORY"
Revert "um: allocate a guard page to helper threads"
um: virtio: free vu_dev only with the contained struct device
um: kmsg_dumper: always dump when not tty console
um: stdio_console: Make preferred console
um: return error from ioremap()
um: ubd: fix command line handling of ubd
The mp variable in xfs_file_compat_ioctl is only used when
BROKEN_X86_ALIGNMENT is define. Remove it and just open code the
dereference in a few places.
Link: https://lore.kernel.org/r/20210203173009.462205-1-christian.brauner@ubuntu.com
Fixes: f736d93d76 ("xfs: support idmapped mounts")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
replace the bitwise operations with subtract (virt_addr_valid(),
__is_lm_address(), __lm_to_phys()).
-----BEGIN PGP SIGNATURE-----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=mwnv
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Fix the arm64 linear map range detection for tagged addresses and
replace the bitwise operations with subtract (virt_addr_valid(),
__is_lm_address(), __lm_to_phys())"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Use simpler arithmetics for the linear map macros
arm64: Do not pass tagged addresses to __is_lm_address()
Enable the onboard pcf8563 rtc hardware on ODROID N2/N2+ boards via the
common dtsi. Also add aliases to ensure vrtc does not claim /dev/rtc0.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210111135831.2218-1-christianshewitt@gmail.com
The 32-bit Amlogic Meson SoCs embed an ARC processor in the Always-On
power domain which is typically used for managing system suspend. The
memory for this ARC core is taken from the AHB SRAM area. Depending on
the actual SoC a different ARC core is used:
- Meson6 and earlier: some ARCv1 ISA based core (probably an ARC625)
- Meson8 and later: an ARC EM4 (ARCv2 ISA) based core
Add the device-tree node for this remote-processor along with the
required SRAM sections, clocks and reset-lines. Also use the
SoC-specific compatible string to manage any differences (should
they exist).
On Meson8, Meson8b and Meson8m2 the "secbus2" IO region is needed as
some bits need to be programmed there. Add this IO region for those
SoCs as well.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210102205904.2691120-6-martin.blumenstingl@googlemail.com
The Meson8/Meson8b/Meson8m2 SoCs have a register bank called SECBUS2 which
contains registers for various IP blocks such as pin-controller bits for
the BSD_EN and TEST_N GPIOs as well as some AO ARC core control bits.
The registers can be accessed directly when not running in "secure mode".
When "secure mode" is enabled then these registers have to be accessed
through secure monitor calls.
So far these SoCs are always known to boot in "non-secure mode".
Add a binding documentation using syscon (as these registers are shared
across different IPs) for the SECBUS2 registers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210102205904.2691120-3-martin.blumenstingl@googlemail.com
Amlogic Meson8, Meson8b and Meson8m2 SoCs embed an ARC EM4 core
typically used for managing system suspend. A section of the SoCs SRAM
is mapped as memory for this ARC core. Add new compatible strings for
the SRAM section for the ARC core memory.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210102205904.2691120-2-martin.blumenstingl@googlemail.com
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference
board with an S922X-H chip.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210119145734.12675-2-christianshewitt@gmail.com
The node names for devices using the pwm-leds driver follow a certain
naming scheme (now). Parent node name is not enforced, but recommended
by DT project.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201228163217.32520-5-post@lespocky.de
If uid or gid of mount options is larger than INT_MAX, udf_fill_super will
return -EINVAL.
The problem can be encountered by a domain user or reproduced via:
mount -o loop,uid=2147483648 something-in-udf-format.iso /mnt
This can be fixed as commit 233a01fa9c ("fuse: handle large user and
group ID").
Link: https://lore.kernel.org/r/20210129045502.10546-1-bingjingc@synology.com
Reviewed-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Jan Kara <jack@suse.cz>
If uid or gid of mount options is larger than INT_MAX, isofs_fill_super
will return -EINVAL.
The problem can be encountered by a domain user or reproduced via:
mount -o loop,uid=2147483648 ubuntu-16.04.6-server-amd64.iso /mnt
This can be fixed as commit 233a01fa9c ("fuse: handle large user and
group ID").
Link: https://lore.kernel.org/r/20210129045315.10375-1-bingjingc@synology.com
Reviewed-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Will be used by fs parsing options
Link: https://lore.kernel.org/r/20210129045242.10268-1-bingjingc@synology.com
Reviewed-by: Robbie Ko<robbieko@synology.com>
Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Jan Kara <jack@suse.cz>
- Initialize tracing-graph-pause at task creation, not start of
function tracing. Causes the pause counter to be corrupted.
- Set "pause-on-trace" for latency tracers as that option breaks
their output (regression).
- Fix the wrong error return for setting kretprobes on future
modules (before they are loaded).
- Fix re-registering the same kretprobe.
- Add missing value check for added RCU variable reload.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYBnNzhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlpoAP4hU98lfAButfYTuuS7Id+/r21bB4lG
9HHB72wkpEfs8AEAlTDC5c3eXhnXXJC4a8b4sGv1wvBiHL2ZoW/yQ/4oZgA=
=hpY/
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Initialize tracing-graph-pause at task creation, not start of
function tracing, to avoid corrupting the pause counter.
- Set "pause-on-trace" for latency tracers as that option breaks their
output (regression).
- Fix the wrong error return for setting kretprobes on future modules
(before they are loaded).
- Fix re-registering the same kretprobe.
- Add missing value check for added RCU variable reload.
* tag 'trace-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Fix race between tracing and removing tracepoint
kretprobe: Avoid re-registration of the same kretprobe earlier
tracing/kprobe: Fix to support kretprobe events on unloaded modules
tracing: Use pause-on-trace with the latency tracers
fgraph: Initialize tracing_graph_pause at task creation
The code fixes in this round are all for the Texas Instruments OMAP
platform, addressing several regressions related to the ti-sysc
interconnect changes that was merged in linux-5.11 and one recently
introduced RCU usage warning.
Tero Kristo updates his maintainer file entries as he is changing
to a new employer.
The other changes are for devicetree files across eight different
platforms:
TI OMAP:
- multiple gpio related one-line fixes
Allwinner/sunxi:
- ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
- soc: sunxi: mbus: Remove DE2 display engine compatibles
NXP lpc32xx:
- ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
STMicroelectronics stm32
- multiple minor fixes for DHCOM/DHCOR boards
NXP Layerscape:
- Fix DCFG address range on LS1046A SoC
Amlogic meson:
- fix reboot issue on odroid C4
- revert an ethernet change that caused a regression
- meson-g12: Set FL-adj property value
Rockchip:
- multiple minor fixes on 64-bit rockchip machines
Qualcomm:
- Regression fixes for Lenovo Yoga touchpad and for
interconnect configuration
- Boot fixes for 'LPASS' clock configuration on two machines
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=dXiS
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The code fixes in this round are all for the Texas Instruments OMAP
platform, addressing several regressions related to the ti-sysc
interconnect changes that was merged in linux-5.11 and one recently
introduced RCU usage warning.
Tero Kristo updates his maintainer file entries as he is changing to a
new employer.
The other changes are for devicetree files across eight different
platforms:
TI OMAP:
- multiple gpio related one-line fixes
Allwinner/sunxi:
- ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
- soc: sunxi: mbus: Remove DE2 display engine compatibles
NXP lpc32xx:
- ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
STMicroelectronics stm32
- multiple minor fixes for DHCOM/DHCOR boards
NXP Layerscape:
- Fix DCFG address range on LS1046A SoC
Amlogic meson:
- fix reboot issue on odroid C4
- revert an ethernet change that caused a regression
- meson-g12: Set FL-adj property value
Rockchip:
- multiple minor fixes on 64-bit rockchip machines
Qualcomm:
- Regression fixes for Lenovo Yoga touchpad and for interconnect
configuration
- Boot fixes for 'LPASS' clock configuration on two machines"
* tag 'arm-soc-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
arm64: dts: ls1046a: fix dcfg address range
soc: sunxi: mbus: Remove DE2 display engine compatibles
arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
Revert "arm64: dts: amlogic: add missing ethernet reset ID"
arm64: dts: rockchip: Disable display for NanoPi R2S
ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4
arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node
drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata
ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus
ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled
ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02
ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX
ARM: dts: stm32: Fix GPIO hog names on DHCOM
ARM: dts: stm32: Disable optional TSC2004 on DRC02 board
ARM: dts: stm32: Disable WP on DHCOM uSD slot
ARM: dts: stm32: Connect card-detect signal on DHCOM
ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect
arm64: dts: qcom: sdm845: Reserve LPASS clocks in gcc
...
