Add a fixup function that will flip the hsync priority and
add a hskew value that is used to shift the tda998x to the
right by a variable number of pixels depending on the mode.
This works around an issue with the sync timings that tilcdc
is outputing.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some LCD controller cannot provide valid VESA style sync, i.e. coincident
HS/VS edges. First, this patch adds hskew passed from the adjusted_mode to
reference pixel calculation to allow those controllers to add an offset
relative to the expected reference pixel.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes the wrong sync generation and sync calculation of TDA998x
for HS/VS-based sync detection.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch adds tda998x specific parameters to allow it to be configured
for different boards using it. Also, this implements rudimentary audio
support for S/PDIF attached controllers.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The video-input-port (VIP) is highly configurable. This prepares
current driver to allow to configure VIP configuration, as some
boards connect lcd controller and TDA998x "pin-swapped" and depend
on VIP to swap the pins by register configuration.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The npix/nline registers are supposed to be programmed with the total
number of pixels/lines, not the displayed pixels/lines, and not minus
one either.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When switching between various drivers for this device, it's possible
that some critical registers are left containing values which affect
the device operation. One such case encountered is the VIP output
mux register. This defaults to 0x24 on powerup, but other drivers may
set this to 0x12. This results in incorrect colours.
Fix this by ensuring that the register is always set to the power on
default setting.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
TDA19988 devices need their RAM enabled in order to read EDID
information. Add support for this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If NO_DMA=y:
drivers/built-in.o: In function `__drm_pci_free':
drivers/gpu/drm/drm_pci.c:112: undefined reference to `dma_free_coherent'
drivers/built-in.o: In function `drm_pci_alloc':
drivers/gpu/drm/drm_pci.c:72: undefined reference to `dma_alloc_coherent'
drivers/built-in.o: In function `drm_gem_unmap_dma_buf':
drivers/gpu/drm/drm_prime.c:87: undefined reference to `dma_unmap_sg'
drivers/built-in.o: In function `drm_gem_map_dma_buf':
drivers/gpu/drm/drm_prime.c:78: undefined reference to `dma_map_sg'
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Neat that QA (and Ben) keeps on humming along while I'm on vacation, so
you already get the next feature pull request:
- proper eLLC support for HSW from Ben
- more interrupt refactoring
- add w/a tags where we implement them already (Damien)
- hangcheck fixes (Chris) + hangcheck stats (Mika)
- flesh out the new vm structs for ppgtt and ggtt (Ben)
- PSR for Haswell, still disabled by default (Rodrigo et al.)
- pc8+ refclock sequence code from Paulo
- more interrupt refactoring from Paulo, unifying ilk/snb with the ivb/hsw
interrupt code
- full solution for the Haswell concurrent reg access issues (Chris)
- fix racy object accounting, used by some new leak tests
- fix sync polarity settings on ch7xxx dvo encoder
- random bits&pieces, little fixes and better debug output all over
[airlied: fix conflict with drm_mm cleanups]
* tag 'drm-intel-next-2013-07-26-fixed' of git://people.freedesktop.org/~danvet/drm-intel: (289 commits)
drm/i915: Do not dereference NULL crtc or fb until after checking
drm/i915: fix pnv display core clock readout out
drm/i915: Replace open-coded offset_in_page()
drm/i915: Retry DP aux_ch communications with a different clock after failure
drm/i915: Add messages useful for HPD storm detection debugging (v2)
drm/i915: dvo_ch7xxx: fix vsync polarity setting
drm/i915: fix the racy object accounting
drm/i915: Convert the register access tracepoint to be conditional
drm/i915: Squash gen lookup through multiple indirections inside GT access
drm/i915: Use the common register access functions for NOTRACE variants
drm/i915: Use a private interface for register access within GT
drm/i915: Colocate all GT access routines in the same file
drm/i915: fix reference counting in i915_gem_create
drm/i915: Use Graphics Base of Stolen Memory on all gen3+
drm/i915: disable stolen mem for OVERLAY_NEEDS_PHYSICAL
drm/i915: add functions to disable and restore LCPLL
drm/i915: disable CLKOUT_DP when it's not needed
drm/i915: extend lpt_enable_clkout_dp
drm/i915: fix up error cleanup in i915_gem_object_bind_to_gtt
drm/i915: Add some debug breadcrumbs to connector detection
...
This helper is used only once and just wraps a call to
drm_vma_offset_add(). Remove this unneeded indirection to safe 10 lines of
code.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
We used to pre-allocate drm_mm nodes and save them in a linked list for
later usage so we always have spare ones in atomic contexts. However, this
is really racy if multiple threads are in an atomic context at the same
time and we don't have enough spare nodes. Moreover, all remaining users
run in user-context and just lock drm_mm with a spinlock. So we can easily
preallocate the node, take the spinlock and insert the node.
This may have worked well with BKL in place, however, with today's
infrastructure it really doesn't make any sense. Besides, most users can
easily embed drm_mm_node into their objects so no allocation is needed at
all.
Thus, remove the old pre-alloc API and all the helpers that it provides.
Drivers have already been converted and we should not use the old API for
new code, anymore.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
i915 is the last user of the weird search+get_block drm_mm API. Convert it
to an explicit kmalloc()+insert_node(). This drops the last user of the
node-cache in drm_mm. We can remove it now in a follow-up patch.
v2:
- simplify error path in i915_setup_compression()
v3:
- simplify error path even more
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of calling drm_mm_pre_get() in a row, we now preallocate the node
and then use the atomic insertion functions. This has the exact same
semantics and there is no reason to use the racy pre-allocations.
Note that ttm_bo_man_get_node() does not run in atomic context. Nouveau
already uses GFP_KERNEL alloc in nouveau/nouveau_ttm.c in
nouveau_gart_manager_new(). So we can do the same in
ttm_bo_man_get_node().
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Introduce two new helpers, drm_agp_clear() and drm_agp_destroy() which
clear all AGP mappings and destroy the AGP head. This allows to reduce the
AGP code in core DRM and move it all to drm_agpsupport.c.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to pass constants via stack. The width may be explicitly
specified in the format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Because, there is no reason for it not to be const.
v1: original
v2: fix compile break in vmwgfx, and couple related cleanups suggested
by Ville Syrjälä
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add a "best_match" flag similar to the drm_mm_search_*() helpers so we
can convert TTM to use them in follow up patches. We can also inline the
non-generic helpers and move them into the header to allow compile-time
optimizations.
To make calls to drm_mm_{search,insert}_node() more readable, this
converts the boolean argument to a flagset. There are pending patches that
add additional flags for top-down allocators and more.
v2:
- use flag parameter instead of boolean "best_match"
- convert *_search_free() helpers to also use flags argument
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
All the gem based kms drivers really want the same function to
destroy a dumb framebuffer backing storage object.
So give it to them and roll it out in all drivers.
This still leaves the option open for kms drivers which don't use GEM
for backing storage, but it does decently simplify matters for gem
drivers.
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Ben Skeggs <skeggsb@gmail.com>
Reviwed-by: Rob Clark <robdclark@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We need the correct clock to accurately assess whether we need to
enable the double wide pipe mode or not.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: Stuart Abercrombie <sabercrombie@google.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The w/a db makes the recommendation to both use a non-default value for
the initial clock and then to retry with an alternative clock for
Haswell with the Lakeport PCH.
"On LPT:H, use a divider value of 63 decimal (03Fh). If there is a
failure, retry at least three times with 63, then retry at least three
times with 72 decimal (048h)."
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For HPD storm detection we now mask out individual interrupt source
bits. We have already seen a case where HPD interrupt enable bits
were assigned to the wrong pins. To track these conditions more
easily add some debugging messages.
v2: Spelling fixes as suggested by Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Egbert Eich <eich@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The VMA manager is page-size based so drm_vma_node_size() returns the size
in pages. However, drm_gem_mmap_obj() requires the size in bytes. Apply
PAGE_SHIFT so we no longer get EINVAL during mmaps due to too small
buffers.
This bug was introduced in commit:
0de23977cf
"drm/gem: convert to new unified vma manager"
Fixes i915 gtt mmap failure reported by Sedat Dilek in:
Re: linux-next: Tree for Jul 25 [ call-trace: drm | drm-intel related? ]
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This fixes a typo which set the wrong vsync and possibly also hsync
polarity for any modes with positive vsync polarity.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just use a spinlock to protect them.
v2: Rebase onto the new object create refcount fix patch.
v3: Don't kill dev_priv->mm.object_memory as requested by Chris and
hence just use a spinlock instead of atomic_t.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67287
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The TRACE_EVENT_CONDITION is supposed to generate more efficient code
than if (cond) trace(), which is what we are currently using inside the
register access functions.
v2: Rebase onto uncore
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The INTEL_INFO() macro extracts the dev_private pointer from the device,
so passing in the dev_private->dev is a long winded circumlocution.
v2: rebase onto uncore
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Detangle the confusion that NOTRACE variants of the register read/write
routines were directly using the raw register access. We need for those
routines to reuse the common code for serializing register access and
ensuring the correct register power states. This is only possible now
that the only routines that required raw access use their own API.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The GT functions for enabling register access also need to occasionally
write to and read from registers. To avoid the potential recursion as we
modify the public interface to be stricter, introduce a private register
access API for the GT functions.
v2: Rebase
v3: Rebase onto uncore
v4: Use raw interfaces consistently so that we only use the low-level
readN functions from a single location.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently, the register access code is split between i915_drv.c and
intel_pm.c. It only bares a superficial resemblance to the reset of the
powermanagement code, so move it all into its own file. This is to ease
further patches to enforce serialised register access.
v2: Scan for random abuse of I915_WRITE_NOTRACE
v3: Take the opportunity to rename the GT functions as uncore. Uncore is
the term used by the hardware design (and bspec) for all functions
outside of the GPU (and CPU) cores in what is also known as the System
Agent.
v4: Rebase onto SNB rc6 fixes
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Wrestle patch into applying and inline
intel_uncore_early_sanitize (plus move the old comment to the new
function). Also keep the _santize postfix for intel_uncore_sanitize.]
[danvet: Squash in fixup spotted by Chris on irc: We need to call
intel_pm_init before intel_uncore_sanitize since the later will call
cancel_work on the delayed rps setup work the former initializes.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This backmerges Linus' merge commit of the latest drm-fixes pull:
commit 549f3a1218
Merge: 42577ca058ca4a
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue Jul 23 15:47:08 2013 -0700
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
We've accrued a few too many conflicts, but the real reason is that I
want to merge the 100% solution for Haswell concurrent registers
writes into drm-intel-next. But that depends upon the 90% bandaid
merged into -fixes:
commit a7cd1b8fea
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jul 19 20:36:51 2013 +0100
drm/i915: Serialize almost all register access
Also, we can roll up on accrued conflicts.
Usually I'd backmerge a tagged -rc, but I want to get this done before
heading off to vacations next week ;-)
Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_gem.c
v2: For added hilarity we have a init sequence conflict around the
gt_lock, so need to move that one, too. Spotted by Jani Nikula.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of unmapping the nodes in TTM and GEM users manually, we provide
a generic wrapper which does the correct thing for all vma-nodes.
v2: remove bdev->dev_mapping test in ttm_bo_unmap_virtual_unlocked() as
ttm_mem_io_free_vm() does nothing in that case (io_reserved_vm is 0).
v4: Fix docbook comments
v5: use drm_vma_node_size()
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Use the new vma-manager infrastructure. This doesn't change any
implementation details as the vma-offset-manager is nearly copied 1-to-1
from TTM.
The vm_lock is moved into the offset manager so we can drop it from TTM.
During lookup, we use the vma locking helpers to take a reference to the
found object.
In all other scenarios, locking stays the same as before. We always
guarantee that drm_vma_offset_remove() is called only during destruction.
Hence, helpers like drm_vma_node_offset_addr() are always safe as long as
the node has a valid offset.
This also drops the addr_space_offset member as it is a copy of vm_start
in vma_node objects. Use the accessor functions instead.
v4:
- remove vm_lock
- use drm_vma_offset_lock_lookup() to protect lookup (instead of vm_lock)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Martin Peres <martin.peres@labri.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Use the new vma manager instead of the old hashtable. Also convert all
drivers to use the new convenience helpers. This drops all the
(map_list.hash.key << PAGE_SHIFT) non-sense.
Locking and access-management is exactly the same as before with an
additional lock inside of the vma-manager, which strictly wouldn't be
needed for gem.
v2:
- rebase on drm-next
- init nodes via drm_vma_node_reset() in drm_gem.c
v3:
- fix tegra
v4:
- remove duplicate if (drm_vma_node_has_offset()) checks
- inline now trivial drm_vma_node_offset_addr() calls
v5:
- skip node-reset on gem-init due to kzalloc()
- do not allow mapping gem-objects with offsets (backwards compat)
- remove unneccessary casts
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
If we want to map GPU memory into user-space, we need to linearize the
addresses to not confuse mm-core. Currently, GEM and TTM both implement
their own offset-managers to assign a pgoff to each object for user-space
CPU access. GEM uses a hash-table, TTM uses an rbtree.
This patch provides a unified implementation that can be used to replace
both. TTM allows partial mmaps with a given offset, so we cannot use
hashtables as the start address may not be known at mmap time. Hence, we
use the rbtree-implementation of TTM.
We could easily update drm_mm to use an rbtree instead of a linked list
for it's object list and thus drop the rbtree from the vma-manager.
However, this would slow down drm_mm object allocation for all other
use-cases (rbtree insertion) and add another 4-8 bytes to each mm node.
Hence, use the separate tree but allow for later migration.
This is a rewrite of the 2012-proposal by David Airlie <airlied@linux.ie>
v2:
- fix Docbook integration
- drop drm_mm_node_linked() and use drm_mm_node_allocated()
- remove unjustified likely/unlikely usage (but keep for rbtree paths)
- remove BUG_ON() as drm_mm already does that
- clarify page-based vs. byte-based addresses
- use drm_vma_node_reset() for initialization, too
v4:
- allow external locking via drm_vma_offset_un/lock_lookup()
- add locked lookup helper drm_vma_offset_lookup_locked()
v5:
- fix drm_vma_offset_lookup() to correctly validate range-mismatches
(fix (offset > start + pages))
- fix drm_vma_offset_exact_lookup() to actually do what it says
- remove redundant vm_pages member (add drm_vma_node_size() helper)
- remove unneeded goto
- fix documentation
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This function is called without the dev->struct_mutex held, hence we
need to use the _unlocked unreference variants.
As soon as the object is registered userspace can sneak in here with a
gem_close ioctl call, so the object can (and with my new evil tests
actually does) get the final unreference in this place. The lack of
locking then results in hilarity and some good leakage.
To fix this we simply need to revert
Chris Wilson <chris@chris-wilson.co.uk>
v2: We need to make the trace call _before_ we drop our ref - the
object might very well be gone by then already.
v3: Just revert the original patch as suggested by Chris Wilson.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Remove the added white line again to tighten the return
block, requested by Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So I made the mistake of missing that the desktop and mobile chipsets
have different layouts in their PCI configurations, and we were
incorrectly setting the wrong physical address for stolen memory on
mobile chipsets.
Since all gen3+ are actually consistent in the location of the GBSM
register in the PCI configuration space on device 2 (the GPU), use it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Drop cc: stable and fudge conflicts.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Our phys_object code can't deal with stolen memory and so blows up.
Fixing this is quite a bit of work and not worth it much for a single
page object, so just opt-out.
This is necessary prep work to enable stolen on gen2/3 platforms where
the overlay register file isn't stored in the gtt.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For now there are no callers, but these functions are going to be
needed for the code that allows Package C8+. Other future features may
also require this code.
Also merge the commit which introduced assert_can_disable_lcpll and
had the following commit message:
Most of the hardware needs to be disabled before LCPLL is disabled, so
let's add a function to assert some of items listed in the "Display
Sequences for LCPLL disabling" documentation.
The idea is that hsw_disable_lcpll should not disable the hardware,
the callers need to take care of calling hsw_disable_lcpll only once
everything is already disabled.
v2: - Rebase.
- Fix D_COMP wait timeout.
v3: - Use wait_for_atomic_use (Ben)
- Remove/add a useless/needed POSTING_READ (Ben)
- Early return in case LCPLL is already restored (Ben)
- Add ndelay(100) (Ben)
v4: - Merge the commit that added assert_can_disable_lcpll (Ben)
- Add interrupt assertions (Ben)
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Fix compile fail since there's no HAS_LP_PCH yet.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We currently don't support HDMI clock bending nor use SSC for DP or
HDMI on Haswell, so the only case where we need CLKOUT_DP is for VGA.
v2: - Replace the IS_ULT check for LPT-LP
- Simplify GEN0/DBUFF0 check due to change on the previous patch
- Also check for SBI_SSCCTL_DISABLE (Ben).
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now it implements 3 different sequences from BSpec and also has
support for ULT.
v2: - Change IS_ULT checks for LPT-LP checks
- Add check for LPT-LP + with_fdi (Ben)
- Merge DBUFF0/GEN0 bit definitions since they're the same
register (Ben)
- DBUFF0 (1<<0) is Disable, not Enable
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This has been broken in
commit 2f63315692
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Wed Jul 17 12:19:03 2013 -0700
drm/i915: Create VMAs
which resulted in an OOPS the first time around we've hit -ENOSPC.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67156
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Tested-by: meng <mengmeng.meng@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Try to decypher detection failures is a little tricker at the moment as
the only indicator of progress is when output_poll_execute() tells us
the result after the connector->detect() has run. This patch adds a
telltale to the start of each detect function so that we can track
progress and associate activity more clearly with each connector.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
All users of it are now gone!
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Last driver and pretty obviously a major user of this little function.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Again just use the version provided by the linux core.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
The version offered by the core is ridiculously optimized and
does the same thing. So use it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
It fiddles the sarea out of the maps which are also handled in
drm_bufs.c
With this drm_drv.c is a notch more legacy free.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
