The sl3516 driver need to depend on HAS_IOMEM.
This fixes a build error:
ERROR: modpost: "devm_platform_ioremap_resource" [drivers/crypto/gemini/sl3516-ce.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When objtool creates the .altinstructions section, it sets the SHF_WRITE
flag to make the section writable -- unless the section had already been
previously created by the kernel. The mismatch between kernel-created
and objtool-created section flags can cause failures with external
tooling (kpatch-build). And the section doesn't need to be writable
anyway.
Make the section flags consistent with the kernel's.
Fixes: 9bc0bb5072 ("objtool/x86: Rewrite retpoline thunk calls")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/6c284ae89717889ea136f9f0064d914cd8329d31.1624462939.git.jpoimboe@redhat.com
This patch adds a function hisi_qm_is_q_updated to
check if the task is ready in hardware queue when
user polls an UACCE queue.This prevents users from
repeatedly querying whether the accelerator has
completed tasks, which wastes CPU resources.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
drivers/crypto/gemini/sl3516-ce-core.c:345:12:
warning: ‘sl3516_ce_pm_resume’ defined but not used [-Wunused-function]
static int sl3516_ce_pm_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~
The driver needs PM, otherwise clock and resets are never set.
So make it depends on PM to fix this warning.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Suggested-by: LABBE Corentin <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Aymen steps down as caam maintainer, being replaced by Pankaj.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The nx driver started out its life as a BE-only driver. However,
somewhere along the way LE support was partially added. This never
seems to have been extended all the way but it does trigger numerous
warnings during build.
This patch fixes all those warnings, but it doesn't mean that the
driver will work on LE.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function nx842_OF_upd_status triggers a sparse RCU warning when
it directly dereferences the RCU-protected devdata. This appears
to be an accident as there was another variable of the same name
that was passed in from the caller.
After it was removed (because the main purpose of using it, to
update the status member was itself removed) the global variable
unintenionally stood in as its replacement.
This patch restores the devdata parameter.
Fixes: 90fd73f912 ("crypto: nx - remove pSeries NX 'status' field")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The definitions for crypto_attr-related types and enums are not
needed by most Crypto API users. This patch moves them out of
crypto.h and into algapi.h/internal.h depending on the extent of
their use.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the unused auth_len variable from
sa_aead_dma_in_callback.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
drivers/crypto/gemini/sl3516-ce-cipher.c: linux/io.h is included more than once.
Generated by: scripts/checkincludes.pl
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
XRSTORS requires a valid xstate buffer to work correctly. XSAVES does not
guarantee to write a fully valid buffer according to the SDM:
"XSAVES does not write to any parts of the XSAVE header other than the
XSTATE_BV and XCOMP_BV fields."
XRSTORS triggers a #GP:
"If bytes 63:16 of the XSAVE header are not all zero."
It's dubious at best how this can work at all when the buffer is not zeroed
before use.
Allocate the buffers with __GFP_ZERO to prevent XRSTORS failure.
Fixes: ce711ea3ca ("perf/x86/intel/lbr: Support XSAVES/XRSTORS for LBR context switch")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/87wnr0wo2z.ffs@nanos.tec.linutronix.de
A couple of small, driver specific fixes that arrived in the past few
weeks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDTaWwACgkQJNaLcl1U
h9AfXAf/VzP5O52cY6BahJ+Z+NQ+NXoLenmBs8ouQTHLBDyWWXPfXbJw+0VHOC5C
vpdgsNFFkoEqDTA/E7FKQWNR2Pnl2Um3kRHf2ZuTTHk10cRewD23O5sv1zQkBNgx
hDqaR6d8QeYkNt5l1utMx6xolHZMkRYv2jOUPfj+pcB7Y2RA/0/qyk8BQKF9oqc1
m3m0PF9X3oDfbJ1/coxZtWsrnIdtuz/ITxdggSHBI566pGAJKBB+RHSaNTG2tCp0
I1ogwrCp0yU9hcUtHl2DW546BvSSh/00vvtJr4KYFeb2UKzSo1eBDA16vKsj9BQP
buFL+rblKz2UxwYrL+Uzmoji3b1hsQ==
=GcX9
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of small, driver specific fixes that arrived in the past few
weeks"
* tag 'spi-fix-v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-nxp-fspi: move the register operation after the clock enable
spi: tegra20-slink: Ensure SPI controller reset is deasserted
The function software_node_notify() - the function that creates
and removes the symlinks between the node and the device - was
called unconditionally in device_add_software_node() and
device_remove_software_node(), but it needs to be called in
those functions only in the special case where the node is
added to a device that has already been registered.
This fixes NULL pointer dereference that happens if
device_remove_software_node() is used with device that was
never registered.
Fixes: b622b24519 ("software node: Allow node addition to already existing device")
Reported-and-tested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert a recent PCI power management commit that causes
initialization issues to appear on some systems.
-----BEGIN PGP SIGNATURE-----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=x9q+
-----END PGP SIGNATURE-----
Merge tag 'pm-5.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Revert a recent PCI power management commit that causes initialization
issues to appear on some systems"
* tag 'pm-5.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PCI: PM: Do not read power state in pci_enable_device_flags()"
On HETEROGENEOUS hardware (ARM big.Little, Intel Alderlake etc.) each
CPU might have a different hardware PMU. Since each such PMU is
represented by a different struct pmu, but we only have a single HW
task context.
That means that the task context needs to switch PMU type when it
switches CPUs.
Not doing this means that ctx->pmu calls (pmu_{dis,en}able(),
{start,commit,cancel}_txn() etc.) are called against the wrong PMU and
things will go wobbly.
Fixes: f83d2f91d2 ("perf/x86/intel: Add Alder Lake Hybrid support")
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/YMsy7BuGT8nBTspT@hirez.programming.kicks-ass.net
Perf errors out when sampling instructions:ppp.
$ perf record -e instructions:ppp -- true
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (instructions:ppp).
The instruction PDIR is only available on the fixed counter 0. The event
constraint has been updated to fixed0_constraint in
icl_get_event_constraints(). The Sapphire Rapids codes unconditionally
error out for the event which is not available on the GP counter 0.
Make the instructions:ppp an exception.
Fixes: 61b985e3e7 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids")
Reported-by: Yasin, Ahmad <ahmad.yasin@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1624029174-122219-4-git-send-email-kan.liang@linux.intel.com
On Sapphire Rapids, there are two more events 0x40ad and 0x04c2 which
rely on the FRONTEND MSR. If the FRONTEND MSR is not set correctly, the
count value is not correct.
Update intel_spr_extra_regs[] to support them.
Fixes: 61b985e3e7 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1624029174-122219-3-git-send-email-kan.liang@linux.intel.com
For some Alder Lake machine, the below fixed counter check warning may be
triggered.
[ 2.010766] hw perf events fixed 5 > max(4), clipping!
Current perf unconditionally increases the number of the GP counters and
the fixed counters for a big core PMU on an Alder Lake system, because
the number enumerated in the CPUID only reflects the common counters.
The big core may has more counters. However, Alder Lake may have an
alternative configuration. With that configuration,
the X86_FEATURE_HYBRID_CPU is not set. The number of the GP counters and
fixed counters enumerated in the CPUID is accurate. Perf mistakenly
increases the number of counters. The warning is triggered.
Directly use the enumerated value on the system with the alternative
configuration.
Fixes: f83d2f91d2 ("perf/x86/intel: Add Alder Lake Hybrid support")
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1624029174-122219-2-git-send-email-kan.liang@linux.intel.com
If we use the "PEBS-via-PT" feature on a platform that supports
extended PBES, like this:
perf record -c 10000 \
-e '{intel_pt/branch=0/,branch-instructions/aux-output/p}' uname
we will encounter the following call trace:
[ 250.906542] unchecked MSR access error: WRMSR to 0x14e1 (tried to write
0x0000000000000000) at rIP: 0xffffffff88073624 (native_write_msr+0x4/0x20)
[ 250.920779] Call Trace:
[ 250.923508] intel_pmu_pebs_enable+0x12c/0x190
[ 250.928359] intel_pmu_enable_event+0x346/0x390
[ 250.933300] x86_pmu_start+0x64/0x80
[ 250.937231] x86_pmu_enable+0x16a/0x2f0
[ 250.941434] perf_event_exec+0x144/0x4c0
[ 250.945731] begin_new_exec+0x650/0xbf0
[ 250.949933] load_elf_binary+0x13e/0x1700
[ 250.954321] ? lock_acquire+0xc2/0x390
[ 250.958430] ? bprm_execve+0x34f/0x8a0
[ 250.962544] ? lock_is_held_type+0xa7/0x120
[ 250.967118] ? find_held_lock+0x32/0x90
[ 250.971321] ? sched_clock_cpu+0xc/0xb0
[ 250.975527] bprm_execve+0x33d/0x8a0
[ 250.979452] do_execveat_common.isra.0+0x161/0x1d0
[ 250.984673] __x64_sys_execve+0x33/0x40
[ 250.988877] do_syscall_64+0x3d/0x80
[ 250.992806] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 250.998302] RIP: 0033:0x7fbc971d82fb
[ 251.002235] Code: Unable to access opcode bytes at RIP 0x7fbc971d82d1.
[ 251.009303] RSP: 002b:00007fffb8aed808 EFLAGS: 00000202 ORIG_RAX: 000000000000003b
[ 251.017478] RAX: ffffffffffffffda RBX: 00007fffb8af2f00 RCX: 00007fbc971d82fb
[ 251.025187] RDX: 00005574792aac50 RSI: 00007fffb8af2f00 RDI: 00007fffb8aed810
[ 251.032901] RBP: 00007fffb8aed970 R08: 0000000000000020 R09: 00007fbc9725c8b0
[ 251.040613] R10: 6d6c61632f6d6f63 R11: 0000000000000202 R12: 00005574792aac50
[ 251.048327] R13: 00007fffb8af35f0 R14: 00005574792aafdf R15: 00005574792aafe7
This is because the target reload msr address is calculated
based on the wrong base msr and the target reload msr value
is accessed from ds->pebs_event_reset[] with the wrong offset.
According to Intel SDM Table 2-14, for extended PBES feature,
the reload msr for MSR_IA32_FIXED_CTRx should be based on
MSR_RELOAD_FIXED_CTRx.
For fixed counters, let's fix it by overriding the reload msr
address and its value, thus avoiding out-of-bounds access.
Fixes: 42880f726c66("perf/x86/intel: Support PEBS output to PT")
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210621034710.31107-1-likexu@tencent.com
Pull swiotlb fix from Konrad Rzeszutek Wilk:
"A fix for the regression for the DMA operations where the offset was
ignored and corruptions would appear.
Going forward there will be a cleanups to make the offset and
alignment logic more clearer and better test-cases to help with this"
* 'stable/for-linus-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: manipulate orig_addr when tlb_addr has offset
Changes in v10:
- The internal CS inactive function is only supported after VER 0x00110002
Changes in v9:
- Conver to use CS GPIO description
Changes in v8:
- There is a problem with the version 7 mail format. resend it
Changes in v7:
- Fall back "rockchip,rv1126-spi" to "rockchip,rk3066-spi"
Changes in v6:
- Consider to compatibility, the "rockchip,rk3568-spi" is removed in
Series-changes v5, so the commit massage should also remove the
corresponding information
Changes in v5:
- Change to leave one compatible id rv1126, and rk3568 is compatible
with rv1126
Changes in v4:
- Adjust the order patches
- Simply commit massage like redundancy "application" content
Changes in v3:
- Fix compile error which is find by Sascha in [v2,2/8]
Jon Lin (6):
dt-bindings: spi: spi-rockchip: add description for rv1126
spi: rockchip: add compatible string for rv1126
spi: rockchip: Set rx_fifo interrupt waterline base on transfer item
spi: rockchip: Wait for STB status in slave mode tx_xfer
spi: rockchip: Support cs-gpio
spi: rockchip: Support SPI_CS_HIGH
.../devicetree/bindings/spi/spi-rockchip.yaml | 1 +
drivers/spi/spi-rockchip.c | 55 ++++++++++++++-----
2 files changed, 41 insertions(+), 15 deletions(-)
--
2.17.1
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210623095843.3228-3-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210623095843.3228-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TTL field indicates the level of page table walk holding the *leaf*
entry for the address being invalidated. But currently, the TTL field
may be set to an incorrent value in the following stack:
pte_free_tlb
__pte_free_tlb
tlb_remove_table
tlb_table_invalidate
tlb_flush_mmu_tlbonly
tlb_flush
In this case, we just want to flush a PTE page, but the tlb->cleared_pmds
is set and we get tlb_level = 2 in the tlb_get_level() function. This may
cause some unexpected problems.
This patch set the TTL field to 0 if tlb->freed_tables is set. The
tlb->freed_tables indicates page table pages are freed, not the leaf
entry.
Cc: <stable@vger.kernel.org> # 5.9.x
Fixes: c4ab2cbc1d ("arm64: tlb: Set the TTL field in flush_tlb_range")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: ZhuRui <zhurui3@huawei.com>
Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com>
Link: https://lore.kernel.org/r/b80ead47-1f88-3a00-18e1-cacc22f54cc4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The boolean variable may_have_irqs is not ininitialized and is
only being set to true in the case where chip is ROHM_CHIP_TYPE_BD9576.
Fix this by ininitialized may_have_irqs to false.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: e7bf1fa58c ("regulator: bd9576: Support error reporting")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210622144730.22821-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DIV_ROUND_UP to prevent truncation by integer division issue.
This ensures we return enough delay time.
Also fix returning negative value when new_sel < old_sel.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210618141412.4014912-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current sun6i SPI implementation initializes the transfer too early,
resulting in SCK going high before the transfer. When using an additional
(gpio) chipselect with sun6i, the chipselect is asserted at a time when
clock is high, making the SPI transfer fail.
This is due to SUN6I_GBL_CTL_BUS_ENABLE being written into
SUN6I_GBL_CTL_REG at an early stage. Moving that to the transfer
function, hence, right before the transfer starts, mitigates that
problem.
Fixes: 3558fe900e (spi: sunxi: Add Allwinner A31 SPI controller driver)
Signed-off-by: Mirko Vogt <mirko-dev|linux@nanl.de>
Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com>
Link: https://lore.kernel.org/r/20210614144507.y3udezjfbko7eavv@runtux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The source file has been renamed froms sev-es.c to sev.c, but the
messages are still prefixed with "SEV-ES: ". Change that to "SEV: " to
make it consistent.
Fixes: e759959fe3 ("x86/sev-es: Rename sev-es.{ch} to sev.{ch}")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210622144825.27588-4-joro@8bytes.org
Add the necessary defines for supporting the GHCB version 2 protocol.
This includes defines for:
- MSR-based AP hlt request/response
- Hypervisor Feature request/response
This is the bare minimum of requests that need to be supported by a GHCB
version 2 implementation. There are more requests in the specification,
but those depend on Secure Nested Paging support being available.
These defines are shared between SEV host and guest support.
[ bp: Fold in https://lkml.kernel.org/r/20210622144825.27588-2-joro@8bytes.org too.
Simplify the brewing macro maze into readability. ]
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/YNLXQIZ5e1wjkshG@8bytes.org
pass through newer vector instructions if vector support is enabled.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This enables the NNPA, BEAR enhancement,reset DAT protection and
processor activity counter facilities via the cpu model.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Using register asm statements has been proven to be very error prone,
especially when using code instrumentation where gcc may add function
calls, which clobbers register contents in an unexpected way.
Therefore get rid of register asm statements in kvm code, even though
there is currently nothing wrong with them. This way we know for sure
that this bug class won't be introduced here.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20210621140356.1210771-1-hca@linux.ibm.com
[borntraeger@de.ibm.com: checkpatch strict fix]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
While the disk state has nothing to do with partitions, BLKRRPART is used
to force a full revalidate after things like a disk format for historical
reasons. Restore that behavior.
Link: https://lore.kernel.org/r/20210617115504.1732350-1-hch@lst.de
Fixes: 471bd0af54 ("sd: use bdev_check_media_change")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Irrespective as to whether CONFIG_MODULE_SIG is configured, specifying
"module.sig_enforce=1" on the boot command line sets "sig_enforce".
Only allow "sig_enforce" to be set when CONFIG_MODULE_SIG is configured.
This patch makes the presence of /sys/module/module/parameters/sig_enforce
dependent on CONFIG_MODULE_SIG=y.
Fixes: fda784e50a ("module: export module signature enforcement status")
Reported-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This got added 14 years ago in 324ae4df00 ("Btrfs: Add block group
pinned accounting back") but it was not ever used. Subsequently its
usage got gradually removed in 8790d502e4 ("Btrfs: Add support for
mirroring across drives") and 11833d66be ("Btrfs: improve async block
group caching"). Let's remove it for good!
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When the call to platform_get_irq() to obtain the IRQ of the lcd fails, the
returned error code should be propagated. However, we currently do not
explicitly assign this error code to 'ret'. As a result, 0 was incorrectly
returned.
Fixes: 7f7b96a8a0 ("drm/kmb: Add support for KeemBay Display")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513134639.6541-1-thunder.leizhen@huawei.com
Revert commit 4514d991d9 ("PCI: PM: Do not read power state in
pci_enable_device_flags()") that is reported to cause PCI device
initialization issues on some systems.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213481
Link: https://lore.kernel.org/linux-acpi/YNDoGICcg0V8HhpQ@eldamar.lan
Reported-by: Michael <phyre@rogers.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Fixes: 4514d991d9 ("PCI: PM: Do not read power state in pci_enable_device_flags()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
