We can relax the requirement upon ourselves that the forcewake is
released immediately and just allow it to occur naturally following our
mmio request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-5-chris@chris-wilson.co.uk
Use find-first-set bitop to quickly scan through the fw_domains mask and
skip iterating over unused domains.
v2: Move the WARN into the caller, to prevent compiler warnings in
normal builds.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-4-chris@chris-wilson.co.uk
In the next patch we will begin to sanity check that we do not attempt
to obtain the forcewake on an unsupport domain. However, that is exactly
what we do during reset of the fw_domains - rectify it before it explodes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-3-chris@chris-wilson.co.uk
In the next patch we will begin to sanity check that we do not attempt
to obtain the forcewake on an unsupport domain. However, that is exactly
what we do during our actual initialisation of fw_domains - rectify it
before it explodes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-2-chris@chris-wilson.co.uk
Pass along the drm_i915_private pointer from the caller, rather than
looking it up from each fw_domain during fw_domains_get/_put. This
allows us to then eliminate the backpointer, in exchange for a more
complicated unwrapping procedure in the rare
intel_uncore_fw_release_timer().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-1-chris@chris-wilson.co.uk
If we avoid initializing forcewake domains when running as
a guest, and also use gen2 mmio accessors in that case, we
can avoid the timer traffic and any looping through the
forcewake code which is currently just so it can end up in
the no-op forcewake implementation.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Weinan Li <weinan.z.li@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310095747.12258-1-tvrtko.ursulin@linux.intel.com
[tursulin: commit spelling fix]
Baytrail PMIC vs. PMU race fixes from Hans de Goede
This time the right version (v4), with the compile fix.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
In commit 003342a500 ("drm/i915: Keep track of active
forcewake domains in a bitmask") I forgot to adjust the
newly introduce fw_domains_active state across reset.
This caused the assert_forcewakes_inactive to trigger
during suspend and resume if there were user held
forcewakes.
v2: Bitmask checks are required since vfuncs are not
always present.
v3: Move bitmask tracking to get/put vfunc for simplicity.
(Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 003342a500 ("drm/i915: Keep track of active forcewake domains in a bitmask")
Testcase: igt/drv_suspend/forcewake
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Paneri, Praveen" <praveen.paneri@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: v4.10+ <stable@vger.kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310093249.4484-1-tvrtko.ursulin@linux.intel.com
assert_spin_locked() becomes an unconditionally compiled BUG_ON(),
adding debug code right into the heart of critical routines like
interrupt handlers.
text data bss dec hex
1296480 19944 2272 1318696 141f28 before (lockdep disabled)
1295984 19944 2272 1318200 141d38 after
1336261 21139 3208 1360608 14c2e0 before (lockdep enabled)
1339920 21139 3208 1364267 14d12b after
Small saving for release; hopefully more instructive in debug.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302132801.599-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Listen for PMIC bus access notifications and get FORCEWAKE_ALL while
the bus is accessed to avoid needing to do any forcewakes, which need
PMIC bus access, while the PMIC bus is busy:
This fixes errors like these showing up in dmesg, usually followed
by a gfx or system freeze:
[drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request.
[drm:fw_domains_get [i915]] *MEDIA* render: timed out waiting for forcewake ack request.
i2c_designware 808622C1:06: punit semaphore timed out, resetting
i2c_designware 808622C1:06: PUNIT SEM: 2
i2c_designware 808622C1:06: couldn't acquire bus ownership
Downside of this approach is that it causes wakeups whenever the PMIC
bus is accessed. Unfortunately we cannot simply wait for the PMIC bus
to go idle when we hit a race, as forcewakes may be done from interrupt
handlers where we cannot sleep to wait for the i2c PMIC bus access to
finish.
Note that the notifications and thus the wakeups will only happen on
baytrail / cherrytrail devices using PMICs with a shared i2c bus for
P-Unit and host PMIC access (i2c busses with a _SEM method in their
APCI node), e.g. an axp288 PMIC.
I plan to write some patches for drivers accessing the PMIC bus to
limit their bus accesses to a bare minimum (e.g. cache registers, do not
update battery level more often then 4 times a minute), to limit the
amount of wakeups.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: tagorereddy <tagore.chandan@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Wiggle in conflicts.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rename intel_uncore_early_sanitize to intel_uncore_resume, dropping the
(always true) restore_forcewake argument and add a new intel_uncore_resume
function to replace the intel_uncore_forcewake_reset(dev_priv, false)
calls done from the suspend / runtime_suspend functions and make
intel_uncore_forcewake_reset private.
This is a preparation patch for adding PMIC bus access notifier support.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: tagorereddy <tagore.chandan@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210102802.20898-12-hdegoede@redhat.com
Now that the kselftest infrastructure exists, put it to use and add to
it the existing consistency checks on the fw register lookup tables.
v2: s/tabke/table/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170213171558.20942-22-chris@chris-wilson.co.uk
The only difference for the more recent of those macros is the version
of the *_reg_<read/write>_fw_domains function. Passing the function
prefix in allows us to re-use the same macro to generate functions for
different GENs and will make it easier to add new accessors in the future
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486171409-21542-1-git-send-email-daniele.ceraolospurio@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Having converted the force_wake_get/_put routines for a vGPU to be no-op,
we can use the common mmio accessors and remove our specialised routines
that simply skipped the calls to control force_wake.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1485408228-12932-1-git-send-email-weinan.z.li@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
For a virtualized GPU, the host maintains the forcewake state on the real
device. As we don't control forcewake ourselves, we can simply set
force_wake_get() and force_wake_put() to be no-ops. By setting the vfuncs,
we adjust both the manual control of forcewake and around the mmio
accessors (making our vgpu specific mmio routines redundant and to be
removed in the next patch).
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1485408013-12780-1-git-send-email-weinan.z.li@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYaYNlAAoJEHm+PkMAQRiGtCUH/18PMUJpHqRKjxL3Yscw+QZC
RmGlD/hwBRLUSgiTCfURNGKP4QZv2kQW7BGsGC72oL01lmxozsU72ixUIO+wXzDY
K2b0OOKGZZWzFtaVm7Qs+5JhHAEKZcT046mLD8sjJuqkrFAhmNLKdwHjihKBEkm9
J3s2tpdXdN0x/Uyga/GY9khEYIrvLPeBoKSz+JXcQKdC0iq3/+PMpWnN47QCNScr
7azojkJkj/rs2cqVdOi7Wbh6PSqIvPsl8E3qJefpaVJF/IQaU1pFdy5g8kYm4V7T
fr6HgIbuN4EQWdN/5cgKrUdpQyV7D8iYx02klk4R8WgfS0QMYoUcsg+XsTd02TI=
=OhGe
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rc2' into drm-intel-next-queued
Backmerge Linux 4.10-rc2 to resync with our -fixes cherry-picks. I've
done the backmerge directly because Dave is on vacation.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Add WARN_ON to find_fw_domain to registers related to uninitialized
hardware.
v2:
- Print the uninitialized domains and register (Chris)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Wang Elaine <elaine.wang@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481120559-17413-1-git-send-email-joonas.lahtinen@linux.intel.com
Pineview deserves to use its own platform enum (which was already added,
unused, previously). IS_G33() no longer matches Pineview, and gets
replaced by IS_G33() || IS_PINEVIEW() or equivalent. Pineview is no
longer an outlier among platform definitions.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481143689-19672-1-git-send-email-jani.nikula@intel.com
The check in __intel_uncore_early_sanitize() to disable decoupled mmio
would disable it for every platform that is not broxton. While that's
not a problem now since only broxton supports that, simply setting
.has_decoupled_mmio in a new platform's device info wouldn't suffice. So
avoid future confusion and change the workaround to only change the
value of has_decoupled_mmio for broxton.
v2: git add compile fix. (Ander)
Cc: Praveen Paneri <praveen.paneri@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479993807-29353-1-git-send-email-ander.conselvan.de.oliveira@intel.com
A bunch of source files with just a few instances of the
incorrect INTEL_INFO use.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Commit 0dd356bb6f ("drm/i915: Eliminate Gen9 special case")
accidentaly dropped a MMIO range between 0xc000 to 0xcfff out
of the blitter forcewake domain. Fix it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 0dd356bb6f ("drm/i915: Eliminate Gen9 special case")
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479373363-16528-1-git-send-email-tvrtko.ursulin@linux.intel.com
Decoupled MMIO is an alternative way to access forcewake domain
registers, which requires less cycles for a single read/write and
avoids frequent software forcewake.
This certainly gives advantage over the forcewake as this new
mechanism “decouples” CPU cycles and allow them to complete even
when GT is in a CPD (frequency change) or C6 state.
This can co-exist with forcewake and we will continue to use forcewake
as appropriate. E.g. 64-bit register writes to avoid writing 2 dwords
separately and land into funny situations.
v2:
- Moved platform check out of the function and got rid of duplicate
functions to find out decoupled power domain (Chris)
- Added a check for forcewake already held and skipped decoupled
access (Chris)
- Skipped writing 64 bit registers through decoupled MMIO (Chris)
v3:
- Improved commit message with more info on decoupled mmio (Tvrtko)
- Changed decoupled operation to enum and used u32 instead of
uint_32 data type for register offset (Tvrtko)
- Moved HAS_DECOUPLED_MMIO to device info (Tvrtko)
- Added lookup table for converting fw_engine to pd_engine (Tvrtko)
- Improved __gen9_decoupled_read and __gen9_decoupled_write
routines (Tvrtko)
v4:
- Fixed alignment and variable names (Chris)
- Write GEN9_DECOUPLED_REG0_DW1 register in just one go (Zhe Wang)
v5:
- Changed HAS_DECOUPLED_MMIO() argument name to dev_priv (Tvrtko)
- Sanitize info->had_decoupled_mmio at init (Chris)
Signed-off-by: Zhe Wang <zhe1.wang@intel.com>
Signed-off-by: Praveen Paneri <praveen.paneri@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479230360-22395-1-git-send-email-praveen.paneri@intel.com
Simply replace the linear search with the kernel's binary
search implementation. There is only six registers currently
in that table so this may not be that interesting. It adds a
function call so hopefully remains performance neutral for now.
v2: No need for manual conversion to bool for return.
(Joonas Lahtinen)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Also verify the order at runtime. This was we can start using
binary search on it in a following patch.
v2: Add comment on the sorted array and only check it when
debug option is enabled.
v3: Use IS_ENABLED. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v1)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We notice two identical copies of the shadow register table and
following from that removal can also unify CHV and Gen9 write
mmio functions and macros into a single implementation.
v2: Name fwtable consistently and use HAS_FWTABLE. (Joonas Lahtinen)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
It is now obvious VLV, CHV and Gen9 mmio read fcuntions are
completely identical so we can remove the three copies and
just keep the newly named generic implementation.
v2: Use fwtable naming consistently. (Joonas Lahtinen)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Remove some macros which are now obviously identical.
v2: Added HAS_FWTABLE macro and simplified intel_uncore_forcewake_for_read.
(Joonas Lahtinen)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
If we store this in the uncore structure we are on a good way to
show more commonality between the per-platform implementations.
v2: Constify table pointer and correct coding style. (Chris Wilson)
v3: Rebase.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
If we insert blitter forcewake domain entries in the range
table we can eliminate that special case and simplify the
code in a few macros. This will enable more unification later.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Instead of the existing linear seach, now that we have sorted
range tables, we can do a binary search on them for some
potential miniscule performance gain, but more importantly
for elegance and code size. Hopefully the perfomance gain is
sufficient to offset the function calls which were not there
before.
v2: Removed const cast away.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Sorting the tables (verified at runtime to help during
development) is another prerequisite for interesting
work which will follow.
v2:
* Remove const away cast and improve comments. (Chris Wilson)
* Check tables only when debug option is enabled.
v3: Use IS_ENABLED. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Move finding the correct forcewake domains to take for
register access from code to a mapping table. This will
allow more interesting work in the following patches
and is easier to review if singled out early.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Once we know we need to take new forcewakes, that being
a slow operation, it does not make sense to inline that
code into every mmio accessor.
Move it to a separate function and save some code.
v2: Be explicit with noinline and remove stale comment.
(Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
There are current places in the code, and there will be more in the
future, which iterate the forcewake domains to find out which ones
are currently active.
To save them from doing this iteration, we can cheaply keep a mask
of active domains in dev_priv->uncore.fw_domains_active.
This has no cost in terms of object size, even manages to shrink it
overall by 368 bytes on my config.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Paneri, Praveen" <praveen.paneri@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
They are completely identical to gen6_write* ones.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We don't have safe 64-bit mmio writes as they are really split into
2x32-bit writes. This tearing is dangerous as the hardware *will*
operate on the intermediate value, requiring great care when assigning.
(See, for example, i965_write_fence_reg.) As such we don't currently use
them and strongly advise not to us them. Go one step further and remove
the 64-bit write vfuncs.
v2: Add some more details to the comment about why WRITE64 is absent,
and why you need to think twice before using READ64.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906144538.4204-1-chris@chris-wilson.co.uk
Rather than walk the full array of engines checking whether each is in
the mask in turn, we can use the mask to jump to the right engines. This
should quicker for a sparse array of engines or mask, whilst generating
smaller code:
text data bss dec hex filename
1251010 4579 800 1256389 132bc5 drivers/gpu/drm/i915/i915.ko
1250530 4579 800 1255909 1329e5 drivers/gpu/drm/i915/i915.ko
The downside is that we have to pass in a temporary, alas no C99
iterators yet.
[P.S. Joonas doesn't like having to pass extra temporaries into the
macro, and even less that I called them tmp. As yet, we haven't found a
macro that avoids passing in a temporary that is smaller. We probably
will get C99 iterators first!]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160827075401.16470-2-chris@chris-wilson.co.uk
Now that PCU communication is reasonably fast, we do not need to defer
RC6 initialisation to a workqueue.
References: https://bugs.freedesktop.org/show_bug.cgi?id=97017
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Some hardware requires a valid render context before it can initiate
rc6 power gating of the GPU; the default state of the GPU is not
sufficient and may lead to undefined behaviour. The first execution of
any batch will load the "golden render state", at which point it is safe
to enable rc6. As we do not forcibly load the kernel context at resume,
we have to hook into the batch submission to be sure that the render
state is setup before enabling rc6.
However, since we don't enable powersaving until that first batch, we
queued a delayed task in order to guarantee that the batch is indeed
submitted.
v2: Rearrange intel_disable_gt_powersave() to match.
v3: Apply user specified cur_freq (or idle_freq if not set).
v4: Give in, and supply a delayed work to autoenable rc6
v5: Mika suggested a couple of better names for delayed_resume_work
v6: Rebalance rpm_put around the autoenable task
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-7-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Since drm_i915_private is now a subclass of drm_device we do not need to
chase the drm_i915_private->dev backpointer and can instead simply
access drm_i915_private->drm directly.
text data bss dec hex filename
1068757 4565 416 1073738 10624a drivers/gpu/drm/i915/i915.ko
1066949 4565 416 1071930 105b3a drivers/gpu/drm/i915/i915.ko
Created by the coccinelle script:
@@
struct drm_i915_private *d;
identifier i;
@@
(
- d->dev->i
+ d->drm.i
|
- d->dev
+ &d->drm
)
and for good measure the dev_priv->dev backpointer was removed entirely.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467711623-2905-4-git-send-email-chris@chris-wilson.co.uk
Since we now subclass struct drm_device, we can save pointer dances by
noting the equivalence of struct drm_device and struct drm_i915_private,
i.e. by using to_i915().
text data bss dec hex filename
1073824 4562 416 1078802 107612 drivers/gpu/drm/i915/i915.ko
1068976 4562 416 1073954 106322 drivers/gpu/drm/i915/i915.ko
Created by the coccinelle script:
@@
expression E;
identifier p;
@@
- struct drm_i915_private *p = E->dev_private;
+ struct drm_i915_private *p = to_i915(E);
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467628477-25379-1-git-send-email-chris@chris-wilson.co.uk
Acquiring the forcewake domain asserts that it is in an atomic section
(as we always expect to be under the uncore.lock). This is true except for
initialising the domains on Ivybridge, and so we generate a warning.
Wrap the manual usage of fw_domains inside the spin_lock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467566973-13596-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
By using the out-of-line intel_wait_for_register() not only do we can
efficiency from using the hybrid wait_for() contained within, but we
avoid code bloat from the numerous inlined loops, in total (all patches):
text data bss dec hex filename
1078551 4557 416 1083524 108884 drivers/gpu/drm/i915/i915.ko
1070775 4557 416 1075748 106a24 drivers/gpu/drm/i915/i915.ko
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-61-git-send-email-chris@chris-wilson.co.uk
