Commit Graph

16969 Commits

Author SHA1 Message Date
Linus Torvalds
a80b824f0b Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits)
  sh: remove dead config symbols from SH code
  sh: Kill off broken snapgear ds1302 code.
  sh: Add a dummy vga.h.
  rtc: rtc-sh: Zero out tm value for invalid rtc states.
  rtc: sh-rtc: Handle rtc_device_register() failure properly.
  sh: Fix heartbeart on Solution Engine series
  sh: Remove SCI_NPORTS from sh-sci.h
  sh: Fix up PAGE_KERNEL_PCC() for nommu.
  sh: hs7751rvoip: Kill off dead IPR IRQ mappings.
  sh: hs7751rvoip: irq.c needs linux/interrupt.h.
  sh: Kill off __{copy,clear}_user_page().
  sh: Optimized copy_{to,from}_user_page() for SH-4.
  sh: Wire up clear_user_highpage().
  sh: Kill off the remaining ST40 cruft.
  superhyway: Handle device_register() retval properly.
  sh: kgdb sysrq depends on magic sysrq.
  sh: Add -Werror for clean directories.
  sh: Fix up kgdb build with modular sh-sci.
  sh: Export __{s,u}divsi3_i4i on all CPUs.
  sh: Fix up kgdb-on-NMI branch target.
  ...
2007-11-09 15:25:29 -08:00
Linus Torvalds
45ff993d2b Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] pxa: fix one-shot timer mode
  [ARM] 4645/1: Cyberpro: Trivial fix to restore 16bpp mode.
  [ARM] 4644/2: fix flush_kern_tlb_range() in module space
  [ARM] Allow watchdog drivers to be selected again
  [ARM] 4633/1: omap build fix when FB enabled
  [ARM] 4642/2: netX: default config for netx based boards
  [ARM] 4641/2: netX: fix kobject_name type
  [ARM] Fix iop3xx macro
2007-11-09 15:24:19 -08:00
Linus Torvalds
c4888f9ffa Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (37 commits)
  [POWERPC] EEH: Make sure warning message is printed
  [POWERPC] Make altivec code in swsusp_32.S depend on CONFIG_ALTIVEC
  [POWERPC] windfarm: Fix windfarm thread freezer interaction
  [POWERPC] Fix si_addr value on low level hash failures
  [POWERPC] Refresh ppc64_defconfig and enable pasemi-related options
  [POWERPC] pasemi: Update defconfig
  [POWERPC] iSeries: Fix ref counting in vio setup
  [POWERPC] ] Fix memset size error
  [POWERPC] Fix link errors for allyesconfig
  [POWERPC] iSeries_init_IRQ non-PCI tidy
  [POWERPC] Change fallocate to match unistd.h on powerpc
  [POWERPC] EEH: Avoid crash on null device
  [POWERPC] EEH: Drivers that need reset trump others
  [POWERPC] EEH: Clean up comments
  [POWERPC] Fix off-by-one error in setting decrementer on Book E/4xx (v2)
  [POWERPC] Fix switch_slb handling of 1T ESID values
  [POWERPC] Fix build failure when CONFIG_VIRT_CPU_ACCOUNTING is not defined
  [POWERPC] Include udbg.h when using udbg_printf
  [POWERPC] Fix cache line vs. block size confusion
  [POWERPC] Fix sysctl table check failure on PowerMac
  ...
2007-11-09 15:16:52 -08:00
Linus Torvalds
a90fcf3111 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Use "is_power_of_2" macro for simplicity.
  [SPARC]: Remove duplicate includes.
2007-11-09 15:08:37 -08:00
David Howells
e4fc5a1a2a FRV: Remove the section annotation on free_initmem()
Remove the section annotation on FRV's free_initmem().  It can't be marked
__init, lest it free itself.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-09 15:02:25 -08:00
Paul Mundt
06e5fda184 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6 2007-11-09 17:59:53 +09:00
Russell King
91bc51d8a1 [ARM] pxa: fix one-shot timer mode
One-shot timer mode on PXA has various bugs which prevent kernels
build with NO_HZ enabled booting.  They end up spinning on a
permanently asserted timer interrupt because we don't properly
clear it down - clearing the OIER bit does not stop the pending
interrupt status.  Fix this in the set_mode handler as well.

Moreover, the code which sets the next expiry point may race with
the hardware, and we might not set the match register sufficiently
in the future.  If we encounter that situation, return -ETIME so
the generic time code retries.

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-08 23:35:46 +00:00
Paul Mundt
541c547731 Merge branch 'page_colouring_despair' 2007-11-08 17:01:42 +09:00
Paul Mackerras
688016f4e2 Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge 2007-11-08 14:28:14 +11:00
Linas Vepstas
2c84b4076c [POWERPC] EEH: Make sure warning message is printed
Fix old buglet; a warning message should have been printed
when a hardware reset takes too long.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:34 +11:00
Johannes Berg
2e6f40deb7 [POWERPC] Make altivec code in swsusp_32.S depend on CONFIG_ALTIVEC
This makes the altivec code in swsusp_32.S depend on CONFIG_ALTIVEC to
avoid build failures for systems that don't have altivec. I'm not sure
whether the code will actually work for other systems, but it was merged
for just ppc32 rather than powermac a very long time ago.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:34 +11:00
Benjamin Herrenschmidt
a792e75d9b [POWERPC] Fix si_addr value on low level hash failures
If the low level MMU hash table insertion returns an error (which
can happen in some rare circumstances when the hypervisor refuses
the insertion of a PTE, typically if you try to access junk via
/dev/mem), the generated signal had an incorrect si_addr value due
to a bug in the assembly, which was loading it as a 32 bits quantity
instead of a 64 bits quantity.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:34 +11:00
Olof Johansson
7e22fa4a1d [POWERPC] Refresh ppc64_defconfig and enable pasemi-related options
Refresh ppc64_defconfig, add PPC_PASEMI and various options that the
common boards there need:

* Chip drivers (iommu, ethernet, IDE, CF, EDAC, MDIO/PHY)
* PCMCIA
* PATA_PCMCIA
* RTC_CLASS
* SATA_MV
* SATA_SIL24
* IP_PNP + NFS_ROOT for diskless booting

+ possibly some other things I might have missed to list

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:34 +11:00
Olof Johansson
0c83ddfeb4 [POWERPC] pasemi: Update defconfig
Update pasemi_defconfig.  Add a few missing options for default devices
on electra boards, enable tickless and hrtimers, etc, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:33 +11:00
Stephen Rothwell
7992344fde [POWERPC] iSeries: Fix ref counting in vio setup
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:33 +11:00
Li Zefan
aca71ef882 [POWERPC] ] Fix memset size error
The size passing to memset is wrong.

Signed-off-by Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:33 +11:00
Stephen Rothwell
e95c91821f [POWERPC] Fix link errors for allyesconfig
An allyesconfig build creates a .text section that is so big that the
.text.init.refok and .fixup sections are too far away for the relocations
to be fixed up correctly. This patch fixes that by linking all the
relevent text sections for each file together.

Suggested by Paul Mackerras.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:33 +11:00
Stephen Rothwell
18244cfbc3 [POWERPC] iSeries_init_IRQ non-PCI tidy
ppc_md.init_IRQ is not called if it is NULL, so we don't need an empty
routine in the non PCI case.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:33 +11:00
Linas Vepstas
b37ceefe7c [POWERPC] EEH: Avoid crash on null device
Bugfix: avoid crash if there's no PCI device for a given
openfirmware node.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:32 +11:00
Linas Vepstas
2a50f144fc [POWERPC] EEH: Drivers that need reset trump others
Bugfix: if a driver controlling one part of a multi-function PCI card
has asked for a reset, honor that request above all others.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:32 +11:00
Linas Vepstas
638799b335 [POWERPC] EEH: Clean up comments
Clean up commentary, remove dead code.

Signed-off-by Linas Vepstas <linas@austin.ibm.com>

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:32 +11:00
Paul Mackerras
43875cc0a5 [POWERPC] Fix off-by-one error in setting decrementer on Book E/4xx (v2)
The decrementer in Book E and 4xx processors interrupts on the
transition from 1 to 0, rather than on the 0 to -1 transition as on
64-bit server and 32-bit "classic" (6xx/7xx/7xxx) processors.  At the
moment we subtract 1 from the count of how many decrementer ticks are
required before the next interrupt before putting it into the
decrementer, which is correct for server/classic processors, but could
possibly cause the interrupt to happen too early on Book E and 4xx if
the timebase/decrementer frequency is low.

This fixes the problem by making set_dec subtract 1 from the count for
server and classic processors, instead of having the callers subtract
1.  Since set_dec already had a bunch of ifdefs to handle different
processor types, there is no net increase in ugliness. :)

Note that calling set_dec(0) may not generate an interrupt on some
processors.  To make sure that decrementer_set_next_event always calls
set_dec with an interval of at least 1 tick, we set min_delta_ns of
the decrementer_clockevent to correspond to 2 ticks (2 rather than 1
to compensate for truncations in the conversions between ticks and
ns).

This also removes a redundant call to set the decrementer to
0x7fffffff - it was already set to that earlier in timer_interrupt.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:31 +11:00
will schmidt
465ccab9eb [POWERPC] Fix switch_slb handling of 1T ESID values
Now that we have 1TB segment size support, we need to be using the
GET_ESID_1T macro when comparing ESID values for pc, stack, and
unmapped_base within switch_slb().   A new helper function called
esids_match() contains the logic for deciding when to call GET_ESID
and GET_ESID_1T.

This fixes a duplicate-slb-entry inspired machine-check exception I
was seeing when trying to run java on a power6 partition.

Tested on power6 and power5.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:31 +11:00
Tony Breeds
e7bda183d4 [POWERPC] Fix build failure when CONFIG_VIRT_CPU_ACCOUNTING is not defined
Without this patch I get the following build failure
  CC      arch/powerpc/platforms/celleb/setup.o
arch/powerpc/platforms/celleb/setup.c:151: error: 'generic_calibrate_decr' undeclared here (not in a function)

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:31 +11:00
will schmidt
aa39be09df [POWERPC] Include udbg.h when using udbg_printf
This fixes the error
	error: implicit declaration of function "udbg_printf"

We have a few spots where we reference udbg_printf() without #including
udbg.h.  These are within #ifdef DEBUG blocks, so unnoticed until we do
a #define DEBUG or #define DEBUG_LOW nearby.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:31 +11:00
Benjamin Herrenschmidt
20474abda6 [POWERPC] Fix cache line vs. block size confusion
We had an historical confusion in the kernel between cache line
and cache block size. The former is an implementation detail of
the L1 cache which can be useful for performance optimisations,
the later is the actual size on which the cache control
instructions operate, which can be different.

For some reason, we had a weird hack reading the right property
on powermac and the wrong one on any other 64 bits (32 bits is
unaffected as it only uses the cputable for cache block size
infos at this stage).

This fixes the booting-without-of.txt documentation to mention
the right properties, and fixes the 64 bits initialization code
to look for the block size first, with a fallback to the line
size if the property is missing.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:30 +11:00
Alexey Dobriyan
fb293ae1c0 [POWERPC] Fix sysctl table check failure on PowerMac
kernel was marked with 0755. Everywhere else it's 0555.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:30 +11:00
Olof Johansson
4bfac36891 [POWERPC] Fix CONFIG_SMP=n build break
Fix two build errors on powerpc allyesconfig + CONFIG_SMP=n:

arch/powerpc/platforms/built-in.o: In function `cpu_affinity_set':
arch/powerpc/platforms/cell/spu_priv1_mmio.c:78: undefined reference to `.iic_get_target_id'
arch/powerpc/platforms/built-in.o: In function `iic_init_IRQ':
arch/powerpc/platforms/cell/interrupt.c:397: undefined reference to `.iic_setup_cpu'

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:30 +11:00
Scott Wood
aeb4552fad [POWERPC] bootwrapper: Revert ps3 binary flag usage, and remove .bin suffix
The ps3 target produces two images, and the binary one is not the
"primary" image that corresponds to the -o flag; thus, it no longer
uses the generic binary flag.

On platforms which do use the binary flag, it no longer produces a
.bin suffix, so that the output file matches what was passed to the -o flag.

This should fix the zImage ln problems for the ps3 target.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:30 +11:00
Dale Farnsworth
d102c9d5d3 [POWERPC] Fix mv643xx_pci sysfs .read and .write functions
Commit 91a69029 introduced an additional parameter to the .read and .write
methods for sysfs binary attributes.  Two mv64x60_pci functions
were missed in that patch, resulting in these errors:
	/cache/git/linux-2.6/arch/powerpc/sysdev/mv64x60_pci.c:77: warning: initialization from incompatible pointer type
	/cache/git/linux-2.6/arch/powerpc/sysdev/mv64x60_pci.c:78: warning: initialization from incompatible pointer type

Add the missing "struct bin_attribute *" parameter.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:29 +11:00
Aurelien Jarno
3a800ff50a [POWERPC] i8259: Add disable method
Since commit 76d2160147, the NE2000 card
is not working anymore on PPC and POWERPC and produces WATCHDOG
timeouts.

The patch below fixes that the same way it has been done on x86, x86_64
and MIPS.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:29 +11:00
Michael Ellerman
1db3e890ae [POWERPC] Read back MSI message in rtas_setup_msi_irqs() so restore works
There are plans afoot to use pci_restore_msi_state() to restore MSI
state after a device reset.  In order for this to work for the RTAS MSI
backend, we need to read back the MSI message from config space after
it has been setup by firmware.

This should be sufficient for restoring the MSI state after a device
reset, however we will need to revisit this for suspend to disk if that
is ever implemented on pseries.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:29 +11:00
Olof Johansson
bdd71eec9b [POWERPC] Fix build break in arch/ppc/syslib/m8260_setup.c
Fix build break and warnings in current mainline git:

arch/ppc/syslib/m8260_setup.c: In function 'm8260_setup_arch':
arch/ppc/syslib/m8260_setup.c:63: error: implicit declaration of function 'identify_ppc_sys_by_name_and_id'
arch/ppc/syslib/m8260_setup.c:64: warning: passing argument 1 of 'in_be32' makes pointer from integer without a cast
arch/ppc/syslib/m8260_setup.c: In function 'm8260_show_cpuinfo':
arch/ppc/syslib/m8260_setup.c:158: warning: format '%08x' expects type 'unsigned int', but argument 5 has type 'long unsigned int'
arch/ppc/syslib/m8260_setup.c:158: warning: format '%d' expects type 'int', but argument 6 has type 'long unsigned int'
arch/ppc/syslib/m8260_setup.c:158: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'long unsigned int'
arch/ppc/syslib/m8260_setup.c:158: warning: format '%u' expects type 'unsigned int', but argument 8 has type 'long unsigned int'
arch/ppc/syslib/m8260_setup.c:158: warning: format '%u' expects type 'unsigned int', but argument 9 has type 'long unsigned int'
make[1]: *** [arch/ppc/syslib/m8260_setup.o] Error 1
make[1]: *** Waiting for unfinished jobs....

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:29 +11:00
Paul Mundt
6d1c76d4e7 sh: Kill off broken snapgear ds1302 code.
This will force the snapgear boards to use the on-chip SH RTC instead,
until the rtc-ds1302 driver is merged. The current code is broken
and hasn't built in some time, so just kill it off and get the board
working again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-08 11:24:33 +09:00
Russell King
70dfa3f875 [ARM] Allow watchdog drivers to be selected again
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-07 14:13:35 +00:00
Nobuhiro Iwamatsu
9c88b6ba1c sh: Fix heartbeart on Solution Engine series
Access size to LED is not added on Solution Engine series.
LED doesn't work. Fixed this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 14:56:46 +09:00
Lucas Woods
9c969ffe1f [SPARC]: Remove duplicate includes.
Signed-off-by: Lucas Woods <woodzy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-06 21:23:11 -08:00
Paul Mundt
c7a0e13d0a sh: hs7751rvoip: Kill off dead IPR IRQ mappings.
This is dead code, and doesn't build anyways. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:39:35 +09:00
Paul Mundt
b7b2387004 sh: hs7751rvoip: irq.c needs linux/interrupt.h.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:38:37 +09:00
Paul Mundt
af39c16bd8 sh: Kill off __{copy,clear}_user_page().
Now that copy_to_user_page()/copy_from_user_page() are wired up, we
can drop the old __copy_xxx() implementations. Now that the page
colouring scheme has changed via kmap_coherent(), we can avoid the
flush in these specific helpers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:14:12 +09:00
Paul Mundt
ba1789efea sh: Optimized copy_{to,from}_user_page() for SH-4.
This moves copy_{to,from}_user_page() out-of-line on SH-4 and
converts for the kmap_coherent() API. Based on the MIPS
implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:14:12 +09:00
Paul Mundt
7747b9a493 sh: Wire up clear_user_highpage().
With the kmap_coherent() API in place, this is trivial to implement,
and lets us avoid the cache flush in certain cases.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:14:12 +09:00
Paul Mundt
f966918724 sh: Kill off the remaining ST40 cruft.
The ST40 stuff in-tree hasn't built for some time, and hasn't been
updated for over 3 years. ST maintains their own out-of-tree changes
and rebases occasionally, and that's ultimately where all of the ST40
users go anyways.

In order for the ST40 code to be brought up to date most of the stuff
removed in this changeset would have to be rewritten anyways, so there's
very little benefit in keeping the remnants around either.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Paul Mundt
0acc729ea3 sh: kgdb sysrq depends on magic sysrq.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Paul Mundt
98366c20a2 sh: Add -Werror for clean directories.
Follow the MIPS and sparc64 changes for -Werror instrumentation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Paul Mundt
808bde2537 sh: Fix up kgdb build with modular sh-sci.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Paul Mundt
98c6942975 sh: Export __{s,u}divsi3_i4i on all CPUs.
Currently these are only being exported for CONFIG_CPU_SH4. This
invariably breaks when building for an SH-3 that includes multiple
targets in multilib.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Paul Mundt
96a8a0ba12 sh: Fix up kgdb-on-NMI branch target.
This was all reworked some time ago, the old debug_enter was ripped
out with everything going through a debug trap jump table instead.
Kill off the debug_enter target and reference kgdb_handle_exception
directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Paul Mundt
0e3a9aab95 sh: ubc wakeup for SH-4 only.
SH-4A parts generally don't have any use for this, and it requires an
alternate implementation anyways. Leave this as an SH-4 only option,
as that's the only place this has been needed in the past.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Nobuhiro Iwamatsu
f7b6130e73 sh: Fix compression method when making uImage.
When uImage is made by using 'make uImage', zImage is used.
If zImage is used, the compression method need not be set.
However, it is set for "gzip" for a compression method.
I corrected to set "none".

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:54 +09:00