Instead of RoCE drivers figuring out vlan, smac fields while working on
QP/AH, provide a helper routine to read the L2 fields such as vlan_id and
source mac address.
This moves logic from mlx5 driver to core for wider usage for RoCE ports.
This is a preparation patch to allow detaching netdev in subsequent patch.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Integrate iw_cm_verbs data members into ib_device_ops and ib_device
structs, this is done to achieve the following:
1) Avoid memory related bugs durring error unwind
2) Make the code more cleaner
3) Reduce code duplication
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The QP transition optional parameters for the various transition for XRC
QPs are identical to those for RC QPs.
Many of the XRC QP transition optional parameter bits are missing from the
QP optional mask table. These omissions caused failures when doing XRC QP
state transitions.
For example, when trying to change the response timer of an XRC receive QP
via the RTS2RTS transition, the new timer value was ignored because
MLX5_QP_OPTPAR_RNR_TIMEOUT bit was missing from the optional params mask
for XRC qps for the RTS2RTS transition.
Fix this by adding the missing XRC optional parameters for all QP
transitions to the opt_mask table.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Fixes: a4774e9095 ("IB/mlx5: Fix opt param mask according to firmware spec")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ariel Levkovich says:
====================
The series exposes the ICM address of the receive transport
interface (TIR) of Raw Packet and RSS QPs to the user since they are
required to properly create and insert steering rules that direct flows to
these QPs.
====================
For dependencies this branch is based on mlx5-next from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
* branch 'mlx5_tir_icm':
IB/mlx5: Expose TIR ICM address to user space
net/mlx5: Introduce new TIR creation core API
net/mlx5: Expose TIR ICM address in command outbox
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch exposes the TIR ICM address of raw packet and RSS
QPs to user space.
In order to pass the new field, the patch extends the mlx5
specific QP creation response structure and fills it with
the icm address returned by the FW command, if available.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe says:
====================
Upon review it turns out there are some long standing problems in BAR
mapping area:
* BAR pages intended for read-only can be switched to writable via mprotect.
* Missing use of rdma_user_mmap_io for the mlx5 clock BAR page.
* Disassociate causes SIGBUS when touching the pages.
* CPU pages are being mapped through to the process via remap_pfn_range
instead of the more appropriate vm_insert_page, causing weird behaviors
during disassociation.
This series adds the missing VM_* flag manipulation, adds faulting a zero
page for disassociation and revises the CPU page mappings to use
vm_insert_page.
====================
For dependencies this branch is based on for-rc from
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git
* branch 'rdma_mmap':
RDMA: Remove rdma_user_mmap_page
RDMA/mlx5: Use get_zeroed_page() for clock_info
RDMA/ucontext: Fix regression with disassociate
RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages
RDMA/mlx5: Do not allow the user to write to the clock page
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Upon further research drivers that want this should simply call the core
function vm_insert_page(). The VMA holds a reference on the page and it
will be automatically freed when the last reference drops. No need for
disassociate to sequence the cleanup.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
get_zeroed_page() returns a virtual address for the page which is better
than allocating a struct page and doing a permanent kmap on it.
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since mlx5 supports device disassociate it must use this API for all
BAR page mmaps, otherwise the pages can remain mapped after the device
is unplugged causing a system crash.
Cc: stable@vger.kernel.org
Fixes: 5f9794dc94 ("RDMA/ucontext: Add a core API for mmaping driver IO memory")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The intent of this VMA was to be read-only from user space, but the
VM_MAYWRITE masking was missed, so mprotect could make it writable.
Cc: stable@vger.kernel.org
Fixes: 5c99eaecb1 ("IB/mlx5: Mmap the HCA's clock info to user-space")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The bit VCRCErr in the receive header flag is actually a
reserved field. Remove bit operations on this field.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: John Fleck <john.fleck@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These counters are required for error analysis and debug.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The reference count adjustments on reference count completion
are open coded throughout.
Add a routine to do all reference count adjustments and use.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The currently include file ordering for rdmavt headers has an
ab/ba include issue the precludes using inlines from rdma_vt.h
in rdmavt_qp.h.
At the heart of the issue is that rdma_vt.h includes rdmavt_qp.h.
Fix the ordering issue by adjusting rdma_vt.h to not require rdmavt_qp.h
and move qp related inlines to rdmavt_qp.h.
Additionally, promote rvt_mmap_info to rdma_vt.h since it is shared
by rdmavt_cq.h and rdmavt_qp.h.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The opfn.h include file build-ablility depends on the including file
having the correct includes.
Fix by making opfn.h self sufficient.
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch fixes miscellaneous comment errors.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some kernels now enable CONFIG_IO_STRICT_DEVMEM which prevents multiple
handles to PCI resource0. In order to continue to support expansion ROM
updates while the driver is loaded, the driver must now provide an
interface to control the expansion ROM write protection.
This patch adds an exprom_wp debugfs interface that allows the hfi1_eprom
user tool to disable the expansion ROM write protection by opening the
file and writing a '1'. The write protection is released when writing a
'0' or automatically re-enabled when the file handle is closed. The
current implementation will only allow one handle to be opened at a time
across all hfi1 devices.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Josh Collier <josh.d.collier@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Verbs destroy callbacks are synchronous operations and can't be delayed.
The expectation is that after driver returned from destroy function, the
memory can be freed and user won't be able to access it again.
Ditch workqueue implementation used in HNS driver.
Fixes: d838c481e0 ("IB/hns: Fix the bug when destroy qp")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: oulijun <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlyOup0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHKoIAIKVuBSyD+m65TaM
pjoAFa56weEc67Mmai2A84EOm0MVy9C6L7EOcOgVsJiLxDCYyWQ7xYwV2kceKJpW
H5xauhb3+TxpxYeaeKdPPPHmBdejRwOPYvGAfnDMCqCCWQTad52sQUPCLI+yhF1t
wgnuMi+SwNBWP9aYCXdFPK4fVhh27AcEAOEsRVCh4tIBH/wkf4GwrDr3IX1MFeMX
jE/R43la4hu1swcWBsjkErWUasVPCgJSSQTfKDo9PQTVnoh0PHFp4fkOInVKLymQ
7AGo+Knc+1he+sFsB2IbZwea0xqtJtjtr1oC+at8gNx66qVG+o7UZNi5LR1uPW4Z
4+dwGBk=
=pyXR
-----END PGP SIGNATURE-----
Merge tag 'v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into mlx5-next
Linux 5.1-rc1
We forgot to reset the branch last merge window thus mlx5-next is outdated
and still based on 5.0-rc2. This merge commit is needed to sync mlx5-next
branch with 5.1-rc1.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Switchdev mode and mutiport RoCE mode aren't compatible at this point.
Don't create IB reps when a user switches to switchdev mode and the driver
operates in that mode.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When working in mutliport RoCE mode it is possible to attach a slave
before the master. In that case the slave is waiting for a master to be
attached. When the master is attached it goes over the list of waiting
slaves, finds a slave that is compatible and tries to bind it to itself.
The call stack is:
mlx5_ib_init_multiport_master() -> mlx5_ib_bind_slave_port()
In the bind function we will create a netdev notifier, but this is done
before we initialize the RoCE structure (this is done at a later stage by
the master in the ROCE stage).
Once events are delivered to that notifier we will use
mlx5_ib_get_native_port_mdev() to get the actual port and as the native
port is zero we will access an invalid index in the port structure.
Move the RoCE structure initialization to an earlier stage.
Fixes: 32f69e4be2 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the limitations that were in place and provide support for DEVX and
raw flow creation on reps.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add MLX5_OP_QUERY_ESW_VPORT_CONTEXT to devx white list. It will be allowed
only if HCA_CAP.eswitch_manager==1.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Allow this only via mlx5 raw create flow API, legacy verbs are not
supported. To accommodate that, we add a new attribute to matcher creation
to indicate the type of flow table to be used.
MLX5_IB_ATTR_FLOW_MATCHER_FT_TYPE
With this new attribute MLX5_IB_ATTR_FLOW_MATCHER_FLOW_FLAGS is no longer
needed, we keep it for compatibility but at most only a single attribute can
be passed of the two.
When inserting a flow rule to the FDB we require that a DEVX FT is
provided as a destination, no other configuration is allowed.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of failing the request, just use the supported number of flow
entries.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have a specific prio inside the FDB namespace allow retrieving
it from the RDMA side.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a spelling mistake in a module parameter description. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When scatter to CQE is enabled on a DCT QP it corrupts the mailbox command
since it tried to treat it as as QP create mailbox command instead of a
DCT create command.
The corrupted mailbox command causes userspace to malfunction as the
device doesn't create the QP as expected.
A new mlx5 capability is exposed to user-space which ensures that it will
not enable the feature on DCT without this fix in the kernel.
Fixes: 5d6ff1babe ("IB/mlx5: Support scatter to CQE for DC transport type")
Signed-off-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently if alloc_skb fails to allocate the skb a null skb is passed to
t4_set_arp_err_handler and this ends up dereferencing the null skb. Avoid
the NULL pointer dereference by checking for a NULL skb and returning
early.
Addresses-Coverity: ("Dereference null return")
Fixes: b38a0ad8ec ("RDMA/cxgb4: Set arp error handler for PASS_ACCEPT_RPL messages")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently when the call to create_flow_rule_vport_sq fails, the error
check is being performed on err rather than on the return pointer
flow_rule. The return flow_rule maybe NULL (which is not considered an
error) or an error code, so check for the error on flow_rule.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: d5ed8ac34c ("RDMA/mlx5: Move default representors SQ steering to rule to modify QP")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Removing the use of IDR variable just to name the function ids. Using the
PCI_FUNC(pdev->devfn) instead to create the device name, associated
resources and to print driver into at various places.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a QP is put into error state, the send queue will be flushed.
This mechanism is implemented in both the first and the second leg
of the send engine. Since the second leg is only responsible for
data transactions in the KDETH space for the TID RDMA WRITE request,
it should not perform the flushing of the send queue.
This patch removes the flushing function of the second leg, but
still keeps the bailing out of the QP if it is put into error state.
Fixes: 70dcb2e3dc ("IB/hfi1: Add the TID second leg send packet builder")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have a single IB device with multiple ports we can remove the
VF representor profile.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move from IB device (representor) per virtual function to single IB device
with port per virtual function (port 1 represents the uplink). As number
of ports is a static property of an IB device, declare the IB device with
as many port as the possible according to the PCI bus.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We store the SMI information in the core device's struct, make sure we set
that information only once (and not per port), while here make the for
loop based on the actual size of the array.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The design of representors is such that once an IB representor is created,
the netdev of representor already exists, we can use that fact to simplify
the netdev affinity code.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently the steering for SQs created on representors is done on
creation, once we move to representors as ports of an IB device we need
the port argument which is given only at the modify QP stage, adjust the
code appropriately.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In preparation of moving into a model of single IB device multiple ports
move rep to be part of the port structure. We mark a representor device by
setting is_rep, no functional change with this patch.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On allocation we use the array size and on destruction num_ports, use the
array size of destruction as well, in this context the array corresponds
to the native/actual ports on the NIC so no need to adjust this logic for
representors.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In downstream patches we will need access to the ports before doing any
stages, in order to set net device per representor.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Simplify the code and move the deallocation of the IB device into the
remove function.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Netdev info is stored in a separate array and holds data relevant on a per
port basis, move it to be part of the port struct.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies on the next series
* branch 'mlx5-next':
net/mlx5: E-Switch, add a new prio to be used by the RDMA side
net/mlx5: E-Switch, don't use hardcoded values for FDB prios
net/mlx5: Fix false compilation warning
net/mlx5: Expose MPEIN (Management PCIE INfo) register layout
net/mlx5: Add rate limit print macros
net/mlx5: Add explicit bar address field
net/mlx5: Replace dev_err/warn/info by mlx5_core_err/warn/info
net/mlx5: Use dev->priv.name instead of dev_name
net/mlx5: Make mlx5_core messages independent from mdev->pdev
net/mlx5: Break load_one into three stages
net/mlx5: Function setup/teardown procedures
net/mlx5: Move health and page alloc init to mdev_init
net/mlx5: Split mdev init and pci init
net/mlx5: Remove redundant init functions parameter
net/mlx5: Remove spinlock support from mlx5_write64
net/mlx5: Remove unused MLX5_*_DOORBELL_LOCK macros
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
cxgb4 has a simple non-dynamic use of get_netdev, so conversion is
straightforward.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Drivers that never change their ndev dynamically do not need to use
the get_netdev callback.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
The method of hem free for SCC context is different from qp context.
In the current version, if free SCC hem during the execution of qp free,
there may be smmu error as below:
arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.1.auto: 0x00007d0000000010
arm-smmu-v3 arm-smmu-v3.1.auto: 0x000012000000017c
arm-smmu-v3 arm-smmu-v3.1.auto: 0x00000000000009e0
arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000000000000000
As SCC context is still used by hardware after qp free, we can solve this
problem by removing SCC hem free from hns_roce_qp_free.
Fixes: 6a157f7d1b ("RDMA/hns: Add SCC context allocation support for hip08")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Due to the incorrect use of the seg and obj information, the position of
the mtt is calculated incorrectly, and the free space of the page is not
enough to store the entire mtt, resulting in access to the next page. This
patch fixes this problem.
Unable to handle kernel paging request at virtual address ffff00006e3cd000
...
Call trace:
hns_roce_write_mtt+0x154/0x2f0 [hns_roce]
hns_roce_buf_write_mtt+0xa8/0xd8 [hns_roce]
hns_roce_create_srq+0x74c/0x808 [hns_roce]
ib_create_srq+0x28/0xc8
Fixes: 0203b14c4f ("RDMA/hns: Unify the calculation for hem index in hip08")
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In mhop 0 mode, 64*bt_num queues can be supported.
In mhop 1 mode, 32K*bt_num queues can be supported.
Config srqc_hop_num to 1 to support 1M SRQ queues.
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
