When radix_tree_maxindex() is ~0UL, it can happen that scanning overflows
index and tree traversal code goes astray reading memory until it hits
unreadable memory. Check for overflow and exit in that case.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, if RCU CPU stall warnings are enabled, they are enabled
immediately upon boot. They can be manually disabled via /sys (and
also re-enabled via /sys), and are automatically disabled upon panic.
However, some users need RCU CPU stalls to be disabled at boot time,
but to be enabled without rebuilding/rebooting. For example, someone
running a real-time application in production might not want the
additional latency of RCU CPU stall detection in normal operation, but
might need to enable it at any point for fault isolation purposes.
This commit therefore provides a new CONFIG_RCU_CPU_STALL_DETECTOR_RUNNABLE
kernel configuration parameter that maintains the current behavior
(enable at boot) by default, but allows a kernel to be configured
with RCU CPU stall detection built into the kernel, but disabled at
boot time.
Requested-by: Clark Williams <williams@redhat.com>
Requested-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Also set the default to 60 seconds, up from the previous hard-coded timeout
of 10 seconds. This allows people who care to set short timeouts, while
avoiding people with unusual configurations (make randconfig!!!) from being
bothered with spurious CPU stall warnings.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit provides definitions for the __rcu annotation defined earlier.
This annotation permits sparse to check for correct use of RCU-protected
pointers. If a pointer that is annotated with __rcu is accessed
directly (as opposed to via rcu_dereference(), rcu_assign_pointer(),
or one of their variants), sparse can be made to complain. To enable
such complaints, use the new default-disabled CONFIG_SPARSE_RCU_POINTER
kernel configuration option. Please note that these sparse complaints are
intended to be a debugging aid, -not- a code-style-enforcement mechanism.
There are special rcu_dereference_protected() and rcu_access_pointer()
accessors for use when RCU read-side protection is not required, for
example, when no other CPU has access to the data structure in question
or while the current CPU hold the update-side lock.
This patch also updates a number of docbook comments that were showing
their age.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christopher Li <sparse@chrisli.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
warning: (LATENCYTOP && HAVE_LATENCYTOP_SUPPORT) selects
SCHED_DEBUG which has unmet direct dependencies (DEBUG_KERNEL &&
PROC_FS) warning: (LATENCYTOP && HAVE_LATENCYTOP_SUPPORT) selects
SCHEDSTATS which has unmet direct dependencies (DEBUG_KERNEL && PROC_FS)
Add depends on STACKTRACE_SUPPORT for 'select STACKTRACE'.
Add depends on PROC_FS since that is where the output goes.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <20100812123121.a7c99cde.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for-linus' of git://neil.brown.name/md:
Further tidyup of raid6 naming in lib/raid6
Make lib/raid6/test build correctly.
Rename raid6 files now they're in a 'raid6' directory.
Don't try and #include <linux/slab.h> in lib/inflate.c from the bootloader code
as linux/slab.h hauls in function defs that aren't available in the bootloader
code and may also haul in conflicting functions.
To fix this, make the inclusion of linux/slab.h contingent on NO_INFLATE_MALLOC
as are the usages of kmalloc() and kfree().
In MN10300, this causes the following errors:
In file included from include/linux/string.h:21,
from include/linux/bitmap.h:8,
from include/linux/nodemask.h:93,
from include/linux/mmzone.h:16,
from include/linux/gfp.h:4,
from include/linux/slab.h:12,
from arch/mn10300/boot/compressed/../../../../lib/inflate.c:106,
from arch/mn10300/boot/compressed/misc.c:170:
/warthog/am33/linux-2.6-mn10300/arch/mn10300/include/asm/string.h:19: error: conflicting types for 'memset'
arch/mn10300/boot/compressed/misc.c:59: error: previous definition of 'memset' was here
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix checkstack error:
lib/decompress_bunzip2.c: In function `get_next_block':
lib/decompress_bunzip2.c:511: warning: the frame size of 1932 bytes is larger than 1024 bytes
byteCount, symToByte, and mtfSymbol cannot be declared static or allocated
dynamically so place them in the bunzip_data struct.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are missing the oops end marker for the exception based WARN implementation
in lib/bug.c. This is useful for logfile analysis tools.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are a few issues with the exception based WARN implementation in
lib/bug.c:
- Inconsistent printk flags. The "cut here" line is printed at KERN_EMERG, so
the console and all logged in users see the single line:
------------[ cut here ]------------
for each WARN. Fix this so we print everything at KERN_WARNING to match the
kernel/panic.c version.
- The lib/bug.c WARN would print "Badness at". Change it to match the
kernel/panic.c version which prints "WARNING: at".
- Print the list of modules, similar to kernel/panic.c of modules, similar to
kernel/panic.c
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://neil.brown.name/md: (24 commits)
md: clean up do_md_stop
md: fix another deadlock with removing sysfs attributes.
md: move revalidate_disk() back outside open_mutex
md/raid10: fix deadlock with unaligned read during resync
md/bitmap: separate out loading a bitmap from initialising the structures.
md/bitmap: prepare for storing write-intent-bitmap via dm-dirty-log.
md/bitmap: optimise scanning of empty bitmaps.
md/bitmap: clean up plugging calls.
md/bitmap: reduce dependence on sysfs.
md/bitmap: white space clean up and similar.
md/raid5: export raid5 unplugging interface.
md/plug: optionally use plugger to unplug an array during resync/recovery.
md/raid5: add simple plugging infrastructure.
md/raid5: export is_congested test
raid5: Don't set read-ahead when there is no queue
md: add support for raising dm events.
md: export various start/stop interfaces
md: split out md_rdev_init
md: be more careful setting MD_CHANGE_CLEAN
md/raid5: ensure we create a unique name for kmem_cache when mddev has no gendisk
...
* 'kmemleak' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm:
kmemleak: Fix typo in the comment
lib/scatterlist: Hook sg_kmalloc into kmemleak (v2)
kmemleak: Add DocBook style comments to kmemleak.c
kmemleak: Introduce a default off mode for kmemleak
kmemleak: Show more information for objects found by alias
More code can be pushed from rwsem_down_read_failed and
rwsem_down_write_failed into rwsem_down_failed_common.
Following change adding down_read_critical infrastructure support also
enjoys having flags available in a register rather than having to fish it
out in the struct rwsem_waiter...
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This change addresses the following situation:
- Thread A acquires the rwsem for read
- Thread B tries to acquire the rwsem for write, notices there is already
an active owner for the rwsem.
- Thread C tries to acquire the rwsem for read, notices that thread B already
tried to acquire it.
- Thread C grabs the spinlock and queues itself on the wait queue.
- Thread B grabs the spinlock and queues itself behind C. At this point A is
the only remaining active owner on the rwsem.
In this situation thread B could notice that it was the last active writer
on the rwsem, and decide to wake C to let it proceed in parallel with A
since they both only want the rwsem for read.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously each waiting thread added a bias of RWSEM_WAITING_BIAS. With
this change, the bias is added only once to indicate that the wait list is
non-empty.
This has a few nice properties which will be used in following changes:
- when the spinlock is held and the waiter list is known to be non-empty,
count < RWSEM_WAITING_BIAS <=> there is an active writer on that sem
- count == RWSEM_WAITING_BIAS <=> there are waiting threads and no
active readers/writers on that sem
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In __rwsem_do_wake(), we can skip the active count check unless we come
there from up_xxxx(). Also when checking the active count, it is not
actually necessary to increment it; this allows us to get rid of the read
side undo code and simplify the calculation of the final rwsem count
adjustment once we've counted the reader threads to wake.
The basic observation is the following. When there are waiter threads on
a rwsem and the spinlock is held, other threads can only increment the
active count by trying to grab the rwsem in down_xxxx(). However
down_xxxx() will notice there are waiter threads and take the down_failed
path, blocking to acquire the spinlock on the way there. Therefore, a
thread observing an active count of zero with waiters queued and the
spinlock held, is protected against other threads acquiring the rwsem
until it wakes the last waiter or releases the spinlock.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is in preparation for later changes in the series.
In __rwsem_do_wake(), the first queued waiter is checked first in order to
determine whether it's a writer or a reader. The code paths diverge at
this point. The code that checks and increments the rwsem active count is
duplicated on both sides - the point is that later changes in the series
will be able to independently modify both sides.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Getting and putting arrays of pointers with flex arrays is a PITA. You
have to remember to pass &ptr to the _put and you have to do weird and
wacky casting to get the ptr back from the _get. Add two functions
flex_array_get_ptr() and flex_array_put_ptr() to handle all of the magic.
[akpm@linux-foundation.org: simplification suggested by Joe]
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: James Morris <jmorris@namei.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The strict_strtoul() and strict_strtoull() functions used strlen() to
check argument's length in a situation where it wasn't strictly necessary
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Cc: "Yi Yang" <yi.y.yang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the magic LIST_POISON* values to detect an incorrect use of list_del
on a deleted entry. This DEBUG_LIST specific warning is easier to
understand than the generic Oops message caused by LIST_POISON
dereference.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A profile of a network benchmark showed iommu_num_pages rather high up:
0.52% iommu_num_pages
Looking at the profile, an integer divide is taking almost all of the time:
%
: c000000000376ea4 <.iommu_num_pages>:
1.93 : c000000000376ea4: fb e1 ff f8 std r31,-8(r1)
0.00 : c000000000376ea8: f8 21 ff c1 stdu r1,-64(r1)
0.00 : c000000000376eac: 7c 3f 0b 78 mr r31,r1
3.86 : c000000000376eb0: 38 84 ff ff addi r4,r4,-1
0.00 : c000000000376eb4: 38 05 ff ff addi r0,r5,-1
0.00 : c000000000376eb8: 7c 84 2a 14 add r4,r4,r5
46.95 : c000000000376ebc: 7c 00 18 38 and r0,r0,r3
45.66 : c000000000376ec0: 7c 84 02 14 add r4,r4,r0
0.00 : c000000000376ec4: 7c 64 2b 92 divdu r3,r4,r5
0.00 : c000000000376ec8: 38 3f 00 40 addi r1,r31,64
0.00 : c000000000376ecc: eb e1 ff f8 ld r31,-8(r1)
1.61 : c000000000376ed0: 4e 80 00 20 blr
Since every caller of iommu_num_pages passes in a constant power of two
we can inline this such that the divide is replaced by a shift. The
entire function is only a few instructions once optimised, so it is
a good candidate for inlining overall.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement function for setting one tag if another tag is set for each item
in given range.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add percpu_counter_compare that allows for a quick but accurate comparison
of percpu_counter with a given value.
A rough count is provided by the count field in percpu_counter structure,
without accounting for the other values stored in individual cpu counters.
The actual count is a sum of count and the cpu counters. However, count
field is never different from the actual value by a factor of
batch*num_online_cpu. We do not need to get actual count for comparison
if count is different from the given value by this factor and allows for
quick comparison without summing up all the per cpu counters.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (28 commits)
driver core: device_rename's new_name can be const
sysfs: Remove owner field from sysfs struct attribute
powerpc/pci: Remove owner field from attribute initialization in PCI bridge init
regulator: Remove owner field from attribute initialization in regulator core driver
leds: Remove owner field from attribute initialization in bd2802 driver
scsi: Remove owner field from attribute initialization in ARCMSR driver
scsi: Remove owner field from attribute initialization in LPFC driver
cgroupfs: create /sys/fs/cgroup to mount cgroupfs on
Driver core: Add BUS_NOTIFY_BIND_DRIVER
driver core: fix memory leak on one error path in bus_register()
debugfs: no longer needs to depend on SYSFS
sysfs: Fix one more signature discrepancy between sysfs implementation and docs.
sysfs: fix discrepancies between implementation and documentation
dcdbas: remove a redundant smi_data_buf_free in dcdbas_exit
dmi-id: fix a memory leak in dmi_id_init error path
sysfs: sysfs_chmod_file's attr can be const
firmware: Update hotplug script
Driver core: move platform device creation helpers to .init.text (if MODULE=n)
Driver core: reduce duplicated code for platform_device creation
Driver core: use kmemdup in platform_device_add_resources
...
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Ioremap: fix wrong physical address handling in PAT code
x86, tlb: Clean up and correct used type
x86, iomap: Fix wrong page aligned size calculation in ioremapping code
x86, mm: Create symbolic index into address_markers array
x86, ioremap: Fix normal ram range check
x86, ioremap: Fix incorrect physical address handling in PAE mode
x86-64, mm: Initialize VDSO earlier on 64 bits
x86, kmmio/mmiotrace: Fix double free of kmmio_fault_pages
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
tracing/kprobes: unregister_trace_probe needs to be called under mutex
perf: expose event__process function
perf events: Fix mmap offset determination
perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
perf, powerpc: Convert the FSL driver to use local64_t
perf tools: Don't keep unreferenced maps when unmaps are detected
perf session: Invalidate last_match when removing threads from rb_tree
perf session: Free the ref_reloc_sym memory at the right place
x86,mmiotrace: Add support for tracing STOS instruction
perf, sched migration: Librarize task states and event headers helpers
perf, sched migration: Librarize the GUI class
perf, sched migration: Make the GUI class client agnostic
perf, sched migration: Make it vertically scrollable
perf, sched migration: Parameterize cpu height and spacing
perf, sched migration: Fix key bindings
perf, sched migration: Ignore unhandled task states
perf, sched migration: Handle ignored migrate out events
perf: New migration tool overview
tracing: Drop cpparg() macro
perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
...
Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
Revert "net: Make accesses to ->br_port safe for sparse RCU"
mce: convert to rcu_dereference_index_check()
net: Make accesses to ->br_port safe for sparse RCU
vfs: add fs.h to define struct file
lockdep: Add an in_workqueue_context() lockdep-based test function
rcu: add __rcu API for later sparse checking
rcu: add an rcu_dereference_index_check()
tree/tiny rcu: Add debug RCU head objects
mm: remove all rcu head initializations
fs: remove all rcu head initializations, except on_stack initializations
powerpc: remove all rcu head initializations
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
modpost: support objects with more than 64k sections
trivial: fix a typo in a filename
frv: clean up arch/frv/Makefile
kbuild: allow assignment to {A,C}FLAGS_KERNEL on the command line
kbuild: allow assignment to {A,C,LD}FLAGS_MODULE on the command line
Kbuild: Add option to set -femit-struct-debug-baseonly
Makefile: "make kernelrelease" should show the correct full kernel version
Makefile.build: make KBUILD_SYMTYPES work again
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (49 commits)
microblaze: Add KGDB support
microblaze: Support brki rX, 0x18 for user application debugging
microblaze: Remove nop after MSRCLR/SET, MTS, MFS instructions
microblaze: Simplify syscall rutine
microblaze: Move PT_MODE saving to delay slot
microblaze: Fix _interrupt function
microblaze: Fix _user_exception function
microblaze: Put together addik instructions
microblaze: Use delay slot in syscall macros
microblaze: Save kernel mode in delay slot
microblaze: Do not mix register saving and mode setting
microblaze: Move SAVE_STATE upward
microblaze: entry.S: Macro optimization
microblaze: Optimize hw exception rutine
microblaze: Implement clear_ums macro and fix SAVE_STATE macro
microblaze: Remove additional setup for kernel_mode
microblaze: Optimize SAVE_STATE macro
microblaze: Remove additional loading
microblaze: Completely remove working with R11 register
microblaze: Do not setup BIP in _debug_exception
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
phy/marvell: add 88ec048 support
igb: Program MDICNFG register prior to PHY init
e1000e: correct MAC-PHY interconnect register offset for 82579
hso: Add new product ID
can: Add driver for esd CAN-USB/2 device
l2tp: fix export of header file for userspace
can-raw: Fix skb_orphan_try handling
Revert "net: remove zap_completion_queue"
net: cleanup inclusion
phy/marvell: add 88e1121 interface mode support
u32: negative offset fix
net: Fix a typo from "dev" to "ndev"
igb: Use irq_synchronize per vector when using MSI-X
ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
e1000e: Fix irq_synchronize in MSI-X case
e1000e: register pm_qos request on hardware activation
ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
net: Add getsockopt support for TCP thin-streams
cxgb4: update driver version
cxgb4: add new PCI IDs
...
Manually fix up conflicts in:
- drivers/net/e1000e/netdev.c: due to pm_qos registration
infrastructure changes
- drivers/net/phy/marvell.c: conflict between adding 88ec048 support
and cleaning up the IDs
- drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
conflict (registration change vs marking it static)
* 'stable/swiotlb-0.8.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6:
swiotlb: Make swiotlb bookkeeping functions visible in the header file.
swiotlb: search and replace "int dir" with "enum dma_data_direction dir"
swiotlb: Make internal bookkeeping functions have 'swiotlb_tbl' prefix.
swiotlb: add the swiotlb initialization function with iotlb memory
swiotlb: add swiotlb_tbl_map_single library function
Microblaze doesn't support frame pointers. Ftrace code
uses CALLER_ADDR1 which is defined in linux/ftrace.h. For Microblaze
is 0.
Signed-off-by: Michal Simek <monstr@monstr.eu>
kmemleak ignores page_alloc() and so believes the final sub-page
allocation using the plain kmalloc is decoupled and lost. This leads to
lots of false-positives with code that uses scatterlists.
The options seem to be either to tell kmemleak that the kmalloc is not
leaked or to notify kmemleak of the page allocations. The danger of the
first approach is that we may hide a real leak, so choose the latter
approach (of which I am not sure of the downsides).
v2: Added comments on the suggestion of Catalin.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ARM has support for the atomic64_dec_if_positive operation
so ensure that it is tested by the atomic64_test routine.
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The last 't' of 'fault' is missing in the description of FAIL_IO_TIMEOUT.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Introduce a new DEBUG_KMEMLEAK_DEFAULT_OFF config parameter that allows
kmemleak to be disabled by default, but enabled on the command line
via: kmemleak=on. Although a reboot is required to turn it on, its still
useful to not require a re-compile.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Newer gcc has a -femit-struct-debug-baseonly option that dramatically
reduces the size of object files with debug info. What it does
is to only emit type information for structures when the structures
are defined in the same file or in a header file.
This means the type information for most headers are not included.
This is not good when the type information is actually
needed (e.g. with kgdb or systemtap)
But often kernel hackers only care about line numbers and don't
need all the type information anyways. In this case setting
the option can be a big win:
A build dir for a specific x86-64 configuration with gcc 4.5
shrunk from 2.3G to 1.2G. The compilation was also nearly a minute
faster.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[mmarek: reformatted help text]
Signed-off-by: Michal Marek <mmarek@suse.cz>
via following scripts
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/lmb/memblock/g' \
-e 's/LMB/MEMBLOCK/g' \
$FILES
for N in $(find . -name lmb.[ch]); do
M=$(echo $N | sed 's/lmb/memblock/g')
mv $N $M
done
and remove some wrong change like lmbench and dlmb etc.
also move memblock.c from lib/ to mm/
Suggested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
