i915 can enable aux device nodes for DP MST by calling
drm_dp_mst_connector_late_register()/
drm_dp_mst_connector_early_unregister(),
so let's hook that up.
Changes since v1:
* Call intel_connector_register/unregister() from
intel_dp_mst_connector_late_register/unregister() so we don't lose
error injection - Ville Syrjälä
Changes since v2:
* Don't forget to clean up if intel_connector_register() fails - Ville
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310195122.1590925-1-lyude@redhat.com
Always wait on the start of the signaler request to reduce the problem
of dequeueing the bonded pair too early -- we want both payloads to
start at the same time, with no latency, and yet still allow others to
make full use of the slack in the system. This reduce the amount of time
we spend waiting on the semaphore used to synchronise the start of the
bonded payload.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306133852.3420322-3-chris@chris-wilson.co.uk
gmbus/aux may be clocked by cdclk, thus we should make sure no
transfers are ongoing while the cdclk frequency is being changed.
We do that by simply grabbing all the gmbus/aux mutexes. No one
else should be holding any more than one of those at a time so
the lock ordering here shouldn't matter.
v2: Use mutex_lock_nest_lock() (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302174442.5803-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The low level read_lut() functions don't need the entire crtc state
as they know exactly what they're reading. Just need to pass in the
crtc to get at the pipe. This now neatly mirrors the load_lut()
direction.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303173313.28117-10-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
PIPEGCMAX is a 11.6 (or 1.16 if you will) value. Ie. it can
represent a value of 1.0 when the maximum we can store in the
software LUT is 0.ffff. Clamp the value so that it gets
saturated to the max the uapi supports.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303173313.28117-9-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
A variable called 'i' having an unsigned type is just looking for
trouble, and using a sized type generally makes no sense either.
Change all of them to just plain old int. And do the same for some
'lut_size' variables which generally provide the loop end codition
for 'i'.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303173313.28117-7-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Only load the CGM CSC based on the cgm_mode bit like we
do with the gamma/degamma LUTs. And make the function
naming and arguments consistent as well.
TODO: the code to convert the coefficients look totally
bogus. IIRC CHV uses two's complement format but the code
certainly doesn't generate that, so probably negative
coefficients are totally busted.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303173313.28117-2-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
During i915_request_retire() we decouple the i915_request.hwsp_seqno
from the intel_timeline so that it may be freed before the request is
released. However, we need to warn the compiler that the pointer may
update under its nose.
[ 171.438899] BUG: KCSAN: data-race in i915_request_await_dma_fence [i915] / i915_request_retire [i915]
[ 171.438920]
[ 171.438932] write to 0xffff8881e7e28ce0 of 8 bytes by task 148 on cpu 2:
[ 171.439174] i915_request_retire+0x1ea/0x660 [i915]
[ 171.439408] retire_requests+0x7a/0xd0 [i915]
[ 171.439640] engine_retire+0xa1/0xe0 [i915]
[ 171.439657] process_one_work+0x3b1/0x690
[ 171.439671] worker_thread+0x80/0x670
[ 171.439685] kthread+0x19a/0x1e0
[ 171.439701] ret_from_fork+0x1f/0x30
[ 171.439721]
[ 171.439739] read to 0xffff8881e7e28ce0 of 8 bytes by task 696 on cpu 1:
[ 171.439990] i915_request_await_dma_fence+0x162/0x520 [i915]
[ 171.440230] i915_request_await_object+0x2fe/0x470 [i915]
[ 171.440467] i915_gem_do_execbuffer+0x45dc/0x4c20 [i915]
[ 171.440704] i915_gem_execbuffer2_ioctl+0x2c3/0x580 [i915]
[ 171.440722] drm_ioctl_kernel+0xe4/0x120
[ 171.440736] drm_ioctl+0x297/0x4c7
[ 171.440750] ksys_ioctl+0x89/0xb0
[ 171.440766] __x64_sys_ioctl+0x42/0x60
[ 171.440788] do_syscall_64+0x6e/0x2c0
[ 171.440802] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309110934.868-1-chris@chris-wilson.co.uk
The UNSLICE_UNIT_LEVEL_CLKGATE and UNSLICE_UNIT_LEVEL_CLKGATE2 registers
that we update in a few engine workarounds are not masked registers
(i.e., we don't have to write a mask bit in the top 16 bits when
updating one of the lower 16 bits). As such, these workarounds should
be applied via wa_write_or() rather than wa_masked_en()
v2:
- Rebase
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
References: https://github.com/ClangBuiltLinux/linux/issues/918
Fixes: 50148a25f8 ("drm/i915/tgl: Move and restrict Wa_1408615072")
Fixes: 3551ff9287 ("drm/i915/gen11: Moving WAs to rcs_engine_wa_init()")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306171139.1414649-1-matthew.d.roper@intel.com
Fix the following kerneldoc warning and while at it also the doc for the
corresponding vfunc hook.
$ make htmldocs 2>&1 > /dev/null | grep i915
./drivers/gpu/drm/i915/display/intel_dpll_mgr.h:285: warning: Function parameter or member 'get_freq' not described in 'intel_shared_dpll_funcs'
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304150918.25473-1-imre.deak@intel.com
Be sure to wait for the vma to be in place before we tell the GPU to
execute from the wa batch. Since initialisation is mostly synchronous
(or rather at some point during start up we will need to sync anyway),
we can affort to do an explicit i915_vma_sync() during wa batch
construction rather than check for a required await on every context
switch. (We don't expect to change the wa bb at run time so paying the
cost once up front seems preferrable.)
Fixes: ee2413eeed ("drm/i915: Add mechanism to submit a context WA on ring submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307122425.29114-1-chris@chris-wilson.co.uk
If the cacheline may still be busy, atomically mark it for future
release, and only if we can determine that it will never be used again,
immediately free it.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1392
Fixes: ebece75392 ("drm/i915: Keep timeline HWSP allocated until idle across the system")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Link: https://patchwork.freedesktop.org/patch/msgid/20200306154647.3528345-1-chris@chris-wilson.co.uk
If we stop filling the ELSP due to an incompatible virtual engine
request, check if we should enable the timeslice on behalf of the queue.
This fixes the case where we are inspecting the last->next element when
we know that the last element is the last request in the execution queue,
and so decided we did not need to enable timeslicing despite the intent
to do so!
Fixes: 8ee36e048c ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306113012.3184606-1-chris@chris-wilson.co.uk
Due to the ordering of cmpxchg()/dma_fence_signal() inside node_retire(),
we must also use the xchg() as our primary memory barrier to flush the
outstanding callbacks after expected completion of the i915_active.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306133852.3420322-1-chris@chris-wilson.co.uk
This workaround is to disable FF DOP Clock gating. The fix
in B0 was backed out due to timing reasons and decided to
be made permanent.
Bspec: 52890
Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305181204.28856-1-swathi.dhanavanthri@intel.com
On some platforms such as Elkhart Lake, although we may use DDI D
to drive a connector, we have to use PHY A (Combo Phy PORT A) to
detect the hotplug interrupts as per the spec because there is no
one-to-one mapping between DDIs and PHYs. Therefore, use the
function intel_port_to_phy() which contains the logic for such
mapping(s) to find the correct hpd_pin.
This change should not affect other platforms as there is always
a one-to-one mapping between DDIs and PHYs.
v2:
- Convert the case statements to use PHYs instead of PORTs (Jani)
v3:
- Refactor the function to reduce the number of return statements by
lumping all the case statements together except PHY_F which needs
special handling (Jose)
v4:
- Add a comment describing how the HPD pin value associated with any
port can be retrieved using port or phy enum value. (Jani)
v5:
- Use case ranges instead of individual labels and also normalize the
return statement by adding -PHY_A to the expression (Ville)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304234240.12062-1-vivek.kasireddy@intel.com
Depending on RNG we might try to fill an 8G region for every possible
order, using the smallest possible chunk size of 4K, which seems to be
very slow. Try to remedy the situation by adding an overall timeout for
the test, while also selecting each order level in a random fashion.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1310
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305204711.217783-2-matthew.auld@intel.com
Check the edge case where batch_start_offset sits exactly on the batch
size.
v2: add new range_overflows variant to capture the special case where
the size is permitted to be zero, like with batch_len.
v3: other way around. the common case is the exclusive one which should
just be >=, with that we then just need to convert the three odd ball
cases that don't apply to use the new inclusive _end version.
Testcase: igt/gem_exec_params/invalid-batch-start-offset
Fixes: 0b5372727b ("drm/i915/cmdparser: Use cached vmappings")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306094735.258285-1-matthew.auld@intel.com
We only need to serialise the multiple pinning during the eb_reserve
phase. Ideally this would be using the vm->mutex as an outer lock, or
using a composite global mutex (ww_mutex), but at the moment we are
using struct_mutex for the group.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1381
Fixes: 003d8b9143 ("drm/i915/gem: Only call eb_lookup_vma once during execbuf ioctl")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306071614.2846708-3-chris@chris-wilson.co.uk
We only call i915_schedule() when we know we have changed the priority
on a request and so require to propagate any change in priority to its
signalers (for PI). By unconditionally checking all of our signalers, we
avoid skipping changes made prior to construction of the request (as the
request may be waited upon before submission when used in parallel).
References: https://gitlab.freedesktop.org/drm/intel/issues/1318
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306071614.2846708-2-chris@chris-wilson.co.uk
The alignment is u64, and yet is_power_of_2() assumes unsigned long,
which might give different results between 32b and 64b kernel.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305203534.210466-1-matthew.auld@intel.com
Cc: stable@vger.kernel.org
The release method will undo what we did at creation, and so we
shouldn't care if we have pages or not. Fixes a small leak in the
mock_phys selftest.
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305204258.216302-1-matthew.auld@intel.com
On gen7 and gen7.5 devices, there could be leftover data residuals in
EU/L3 from the retiring context. This patch introduces workaround to clear
that residual contexts, by submitting a batch buffer with dedicated HW
context to the GPU with ring allocation for each context switching.
This security mitigation changes does not triggers any performance
regression. Performance is on par with current drm-tips.
v2: Add igt generated header file for CB kernel assembled with Mesa tool
and addressed use of Kernel macro for ptr_align comment.
v3: Resolve Sparse warnings with newly generated, and imported CB
kernel.
v4: Include new igt generated CB kernel for gen7 and gen7.5. Also
add code formatting and compiler warnings changes (Chris Wilson)
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Balestrieri Francesco <francesco.balestrieri@intel.com>
Cc: Bloomfield Jon <jon.bloomfield@intel.com>
Cc: Dutt Sudeep <sudeep.dutt@intel.com>
Acked-by: Chris Wilson <chris@chris-wilso.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306000957.2836150-2-chris@chris-wilson.co.uk
This patch adds framework to submit an arbitrary batchbuffer on each
context switch to clear residual state for render engine on Gen7/7.5
devices.
The idea of always emitting the context and vm setup around each request
is primary to make reset recovery easy, and not require rewriting the
ringbuffer. As each request would set up its own context, leaving it to
the HW to notice and elide no-op context switches, we could restart the
ring at any point, and reorder the requests freely.
However, to avoid emitting clear_residuals() between consecutive requests
in the ringbuffer of the same context, we do want to track the current
context in the ring. In doing so, we need to be careful to only record a
context switch when we are sure the next request will be emitted.
This security mitigation change does not trigger any performance
regression. Performance is on par with current mainline/drm-tip.
v2: Update vm_alias params to point to correct address space "vm" due to
changes made in the patch "f21613797bae98773"
v3-v4: none
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Balestrieri Francesco <francesco.balestrieri@intel.com>
Cc: Bloomfield Jon <jon.bloomfield@intel.com>
Cc: Dutt Sudeep <sudeep.dutt@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306000957.2836150-1-chris@chris-wilson.co.uk
Teach gvt to use intel_gt directly as it currently assumes direct HW
access.
[Zhenyu: rebase, fix compiling]
Cc: Ding Zhuocheng <zhuocheng.ding@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200304032307.2983-3-zhenyuw@linux.intel.com
Stop trying to escape out of the gvt layer to find the engine that we
initially setup for use with gvt. Record the engines during initialisation
and use them henceforth.
add/remove: 1/4 grow/shrink: 22/28 up/down: 341/-1410 (-1069)
[Zhenyu: rebase, fix nonpriv register check fault, fix gvt engine
thread run failure.]
Cc: Ding Zhuocheng <zhuocheng.ding@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200304032307.2983-2-zhenyuw@linux.intel.com
Remove extra chatty message for debugfs scan_nonprivbb which is used
to enable scan for non privileged batch on specific engine. Just write
target i915 engine mask instead.
Cc: Ding Zhuocheng <zhuocheng.ding@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200304032307.2983-1-zhenyuw@linux.intel.com
Commit c3b5a8430d ("drm/i915/gvt: Enable gfx virtualiztion for CFL")
added the support on CFL. The vgpu emulation hotplug support on CFL was
supposed to be included in that patch. Without the vgpu emulation
hotplug support, the dma-buf based display gives us a blur face.
So fix this issue by adding the vgpu emulation hotplug support on CFL.
Fixes: c3b5a8430d ("drm/i915/gvt: Enable gfx virtualiztion for CFL")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200227010041.32248-1-tina.zhang@intel.com
Requests within a timeline are ordered by that timeline, so awaiting for
the start of a request within the timeline is a no-op. This used to work
by falling out of the mutex_trylock() as the signaler and waiter had the
same timeline and not returning an error.
Fixes: 6a79d84840 ("drm/i915: Lock signaler timeline while navigating")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305134822.2750496-1-chris@chris-wilson.co.uk
Fix the inverted test to emit the wait on the end of the previous
request if we /haven't/ already.
Fixes: 6a79d84840 ("drm/i915: Lock signaler timeline while navigating")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305104210.2619967-1-chris@chris-wilson.co.uk
Converting error to debug print if sink fails to configure scrambling or
TMDS bit clock ratio. In this case, we are timing out while disabling
the scrambling and setting the SCDC ratio, as there is no response
to the I2C SCDC write from the sink device. Error isn't due to something
wrong done from driver side.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302213807.6488-1-swati2.sharma@intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
