This series consists of the usual driver updates (ufs, pm80xx, lpfc,
mpi3mr, mpt3sas, hisi_sas, libsas) and minor updates and bug fixes.
The most impactful change is likely the switch from GFP_DMA to
GFP_KERNEL in a bunch of drivers, but even that shouldn't affect too
many people.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYeCJZyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfMnAQCsERG9
V4yX8LDpBjD7leIccf+6krJNNWaIWYYkEdxpzQD9FShB7/yDakFq3erW2y5mVqac
dZ065M0ckE4bxk9uMIE=
=gPHF
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, pm80xx, lpfc,
mpi3mr, mpt3sas, hisi_sas, libsas) and minor updates and bug fixes.
The most impactful change is likely the switch from GFP_DMA to
GFP_KERNEL in a bunch of drivers, but even that shouldn't affect too
many people"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (121 commits)
scsi: mpi3mr: Bump driver version to 8.0.0.61.0
scsi: mpi3mr: Fixes around reply request queues
scsi: mpi3mr: Enhanced Task Management Support Reply handling
scsi: mpi3mr: Use TM response codes from MPI3 headers
scsi: mpi3mr: Add io_uring interface support in I/O-polled mode
scsi: mpi3mr: Print cable mngnt and temp threshold events
scsi: mpi3mr: Support Prepare for Reset event
scsi: mpi3mr: Add Event acknowledgment logic
scsi: mpi3mr: Gracefully handle online FW update operation
scsi: mpi3mr: Detect async reset that occurred in firmware
scsi: mpi3mr: Add IOC reinit function
scsi: mpi3mr: Handle offline FW activation in graceful manner
scsi: mpi3mr: Code refactor of IOC init - part2
scsi: mpi3mr: Code refactor of IOC init - part1
scsi: mpi3mr: Fault IOC when internal command gets timeout
scsi: mpi3mr: Display IOC firmware package version
scsi: mpi3mr: Handle unaligned PLL in unmap cmnds
scsi: mpi3mr: Increase internal cmnds timeout to 60s
scsi: mpi3mr: Do access status validation before adding devices
scsi: mpi3mr: Add support for PCIe Managed Switch SES device
...
This should be all that is needed for XFS to use large folios.
There is no code in this pull request to create large folios, but
no additional changes should be needed to XFS or iomap once they
are created.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmHcpaUACgkQDpNsjXcp
gj4MUAf+ItcKfgFo1QCMT+6Y0mohVqPme/vdyOCNv6yOOfZZqN5ZQc+2hmxXrRz9
XPOPwZKL0TttlHSYEJmrm8mqwN8UXl0kqMu4kQqOXMziiD9qpVlaLXOZ7iLdkQxu
z/xe1iACcGfJUaQCsaMP6BZqp6iETA4qP72dBE4jc6PC4H3OI0pN/900gEbAcLxD
Yn0a5NhrdS/EySU2aHLB6OcwhqnSiHBVjUbFiuXxuvOYyzLaERIh00Kx3jLdj4DR
82K4TF8h2IZpALfIDSt0JG+gHLCc+EfF7Yd/xkeEv0md3ncyi+jWvFCFPNJbyFjm
cYoDTSunfbxwszA2n01R4JM8/KkGwA==
=IeFX
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.17' of git://git.infradead.org/users/willy/linux
Pull iomap updates from Matthew Wilcox:
"Convert xfs/iomap to use folios.
This should be all that is needed for XFS to use large folios. There
is no code in this pull request to create large folios, but no
additional changes should be needed to XFS or iomap once they are
created.
Usually this would have come from Darrick, and we had intended that it
would come that route. Between the holidays and various things which
Darrick needed to work on, he asked if I could send things directly.
There weren't any other iomap patches pending for this release, which
probably also played a role"
* tag 'iomap-5.17' of git://git.infradead.org/users/willy/linux: (26 commits)
iomap: Inline __iomap_zero_iter into its caller
xfs: Support large folios
iomap: Support large folios in invalidatepage
iomap: Convert iomap_migrate_page() to use folios
iomap: Convert iomap_add_to_ioend() to take a folio
iomap: Simplify iomap_do_writepage()
iomap: Simplify iomap_writepage_map()
iomap,xfs: Convert ->discard_page to ->discard_folio
iomap: Convert iomap_write_end_inline to take a folio
iomap: Convert iomap_write_begin() and iomap_write_end() to folios
iomap: Convert __iomap_zero_iter to use a folio
iomap: Allow iomap_write_begin() to be called with the full length
iomap: Convert iomap_page_mkwrite to use a folio
iomap: Convert readahead and readpage to use a folio
iomap: Convert iomap_read_inline_data to take a folio
iomap: Use folio offsets instead of page offsets
iomap: Convert bio completions to use folios
iomap: Pass the iomap_page into iomap_set_range_uptodate
iomap: Add iomap_invalidate_folio
iomap: Convert iomap_releasepage to use a folio
...
Commit cc9c884dd7 ("block: call submit_bio_checks under q_usage_counter")
uses q_usage_counter to protect submit_bio_checks for avoiding IO after
disk is deleted by del_gendisk().
Turns out the protection isn't necessary, because once
blk_mq_freeze_queue_wait() in del_gendisk() returns:
1) all in-flight IO has been done
2) all new IO will be failed in __bio_queue_enter() because
q_usage_counter is dead, and GD_DEAD is set
3) both disk and request queue instance are safe since caller of
submit_bio() guarantees that the disk can't be closed.
Once submit_bio_checks() needn't the protection of q_usage_counter, we can
move submit_bio_checks before calling blk_mq_submit_bio() and
->submit_bio(). With this change, we needn't to throttle queue with
holding one allocated request, then precise driver tag or request won't be
wasted in throttling. Meantime we can unify the bio check for both bio
based and request based driver.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220104134223.590803-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 5fc11eebb4 ("block: open code create_task_io_context in
set_task_ioprio") introduces a needless assignment
'ioc = task->io_context', as the local variable ioc is not further
used before returning.
Even after the further fix, commit a957b61254 ("block: fix error in
handling dead task for ioprio setting"), the assignment still remains
needless.
Drop this needless assignment in set_task_ioprio().
This code smell was identified with 'make clang-analyzer'.
Fixes: 5fc11eebb4 ("block: open code create_task_io_context in set_task_ioprio")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211223125300.20691-1-lukas.bulwahn@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
John Garry reported a deadlock that occurs when trying to access a
runtime-suspended SATA device. For obscure reasons, the rescan procedure
causes the link to be hard-reset, which disconnects the device.
The rescan tries to carry out a runtime resume when accessing the device.
scsi_rescan_device() holds the SCSI device lock and won't release it until
it can put commands onto the device's block queue. This can't happen until
the queue is successfully runtime-resumed or the device is unregistered.
But the runtime resume fails because the device is disconnected, and
__scsi_remove_device() can't do the unregistration because it can't get the
device lock.
The best way to resolve this deadlock appears to be to allow the block
queue to start running again even after an unsuccessful runtime resume.
The idea is that the driver or the SCSI error handler will need to be able
to use the queue to resolve the runtime resume failure.
This patch removes the err argument to blk_post_runtime_resume() and makes
the routine act as though the resume was successful always. This fixes the
deadlock.
Link: https://lore.kernel.org/r/1639999298-244569-4-git-send-email-chenxiang66@hisilicon.com
Fixes: e27829dc92 ("scsi: serialize ->rescan against ->remove")
Reported-and-tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ioctl(fd, LOOP_CTL_ADD, 1048576) causes
sysfs: cannot create duplicate filename '/dev/block/7:0'
message because such request is treated as if ioctl(fd, LOOP_CTL_ADD, 0)
due to MINORMASK == 1048575. Verify that all minor numbers for that device
fit in the minor range.
Reported-by: wangyangbo <wangyangbo@uniontech.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/b1b19379-23ee-5379-0eb5-94bf5f79f1b4@i-love.sakura.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One device_add is called disk->ev will be freed by disk_release, so we
should free it twice. Fix this by allocating disk->ev after device_add
so that the extra local unwinding can be removed entirely.
Based on an earlier patch from Tetsuo Handa.
Reported-by: syzbot <syzbot+28a66a9fbc621c939000@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+28a66a9fbc621c939000@syzkaller.appspotmail.com>
Fixes: 83cbce9574 ("block: add error handling for device_add_disk / add_disk")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211221161851.788424-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_stat_disable_accounting() is added in commit 68497092bd
("block: make queue stat accounting a reference"), and called in
kyber_exit_sched().
So we have to free q->stats after elevator is unloaded from
blk_exit_queue() in blk_release_queue(). Otherwise kernel panic
is caused.
Fixes: 68497092bd ("block: make queue stat accounting a reference")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211221040436.1333880-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't combine the task exiting and "already have io_context" case, we
need to just abort if the task is marked as dead. Return -ESRCH, which
is the documented value for ioprio_set() if the specified task could not
be found.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: syzbot+8836466a79f4175961b0@syzkaller.appspotmail.com
Fixes: 5fc11eebb4 ("block: open code create_task_io_context in set_task_ioprio")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The low level drivers don't expect to see new requests after a
successful quiesce completes. Check the queue quiesce state within the
rcu protected area prior to calling the driver's queue_rqs().
Fixes: 3c67d44de7 ("block: add mq_ops->queue_rqs hook")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20211220205919.180191-1-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=dbu4
-----END PGP SIGNATURE-----
Merge tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-block
Pull block revert from Jens Axboe:
"It turns out that the fix for not hammering on the delayed work timer
too much caused a performance regression for BFQ, so let's revert the
change for now.
I've got some ideas on how to fix it appropriately, but they should
wait for 5.17"
* tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-block:
Revert "block: reduce kblockd_mod_delayed_work_on() CPU consumption"
-----BEGIN PGP SIGNATURE-----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=Huz8
-----END PGP SIGNATURE-----
Merge tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix for hammering on the delayed run queue timer (me)
- bcache regression fix for this merge window (Lin)
- Fix a divide-by-zero in the blk-iocost code (Tejun)
* tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block:
bcache: fix NULL pointer reference in cached_dev_detach_finish
block: reduce kblockd_mod_delayed_work_on() CPU consumption
iocost: Fix divide-by-zero on donation from low hweight cgroup
This is a thin wrapper around bio_add_page(). The main advantage here
is the documentation that folios larger than 2GiB are not supported.
It's not currently possible to allocate folios that large, but if it
ever becomes possible, this function will fail gracefully instead of
doing I/O to the wrong bytes.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Only bfq needs to code to track icq, so make it conditional.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold create_task_io_context into the only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The flow in set_task_ioprio can be simplified by simply open coding
create_task_io_context, which removes a refcount roundtrip on the I/O
context.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold get_task_io_context into its only caller, and simplify the code
as no reference to the I/O context is required to just set the ioprio
field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keep set_task_ioprio with the other low-level code that accesses the
io_context structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold __ioc_clear_queue into ioc_clear_queue and switch to always
use plain _irq locking instead of the more expensive _irqsave that
is not needed here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the code to delay freeing the icqs into a separate helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No caller passes in a NULL pointer, so remove the check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a ioc_exit_icqs helper to tear down the icqs and the fold
the rest of put_iocontext_active into exit_io_context.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't hold a reference to ->refcount for each active reference, but
just one for all active references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nothing ever looks at ->nr_tasks, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we have a list of requests in our plug list, send it to the driver in
one go, if possible. The driver must set mq_ops->queue_rqs() to support
this, if not the usual one-by-one path is used.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pointless to maintain a head/tail for the list, as we never need to
access the tail. Entries are always LIFO for cache hotness reasons.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The batched completions only deal with non-partial requests anyway,
and it doesn't deal with any requests that have errors. Add a completion
handler that assumes it's a full request and that it's all being ended
successfully.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dexuan reports that he's seeing spikes of very heavy CPU utilization when
running 24 disks and using the 'none' scheduler. This happens off the
sched restart path, because SCSI requires the queue to be restarted async,
and hence we're hammering on mod_delayed_work_on() to ensure that the work
item gets run appropriately.
Avoid hammering on the timer and just use queue_work_on() if no delay
has been specified.
Reported-and-tested-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/linux-block/BYAPR21MB1270C598ED214C0490F47400BF719@BYAPR21MB1270.namprd21.prod.outlook.com/
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kyber turns on IO statistics when it is loaded on a queue, which means
that even if kyber is then later unloaded, we're still stuck with stats
enabled on the queue.
Change the account enabled from a bool to an int, and pair the enable call
with the equivalent disable call. This ensures that stats gets turned off
again appropriately.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The donation calculation logic assumes that the donor has non-zero
after-donation hweight, so the lowest active hweight a donating cgroup can
have is 2 so that it can donate 1 while keeping the other 1 for itself.
Earlier, we only donated from cgroups with sizable surpluses so this
condition was always true. However, with the precise donation algorithm
implemented, f1de2439ec ("blk-iocost: revamp donation amount
determination") made the donation amount calculation exact enabling even low
hweight cgroups to donate.
This means that in rare occasions, a cgroup with active hweight of 1 can
enter donation calculation triggering the following warning and then a
divide-by-zero oops.
WARNING: CPU: 4 PID: 0 at block/blk-iocost.c:1928 transfer_surpluses.cold+0x0/0x53 [884/94867]
...
RIP: 0010:transfer_surpluses.cold+0x0/0x53
Code: 92 ff 48 c7 c7 28 d1 ab b5 65 48 8b 34 25 00 ae 01 00 48 81 c6 90 06 00 00 e8 8b 3f fe ff 48 c7 c0 ea ff ff ff e9 95 ff 92 ff <0f> 0b 48 c7 c7 30 da ab b5 e8 71 3f fe ff 4c 89 e8 4d 85 ed 74 0
4
...
Call Trace:
<IRQ>
ioc_timer_fn+0x1043/0x1390
call_timer_fn+0xa1/0x2c0
__run_timers.part.0+0x1ec/0x2e0
run_timer_softirq+0x35/0x70
...
iocg: invalid donation weights in /a/b: active=1 donating=1 after=0
Fix it by excluding cgroups w/ active hweight < 2 from donating. Excluding
these extreme low hweight donations shouldn't affect work conservation in
any meaningful way.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: f1de2439ec ("blk-iocost: revamp donation amount determination")
Cc: stable@vger.kernel.org # v5.10+
Link: https://lore.kernel.org/r/Ybfh86iSvpWKxhVM@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a Context section and rewrite the rest to be clearer.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Link: https://lore.kernel.org/r/20211213171113.3097631-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=aqTJ
-----END PGP SIGNATURE-----
Merge tag 'block-5.16-2021-12-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few block fixes that should go into this release:
- NVMe pull request:
- set ana_log_size to 0 after freeing ana_log_buf (Hou Tao)
- show subsys nqn for duplicate cntlids (Keith Busch)
- disable namespace access for unsupported metadata (Keith
Busch)
- report write pointer for a full zone as zone start + zone len
(Niklas Cassel)
- fix use after free when disconnecting a reconnecting ctrl
(Ruozhu Li)
- fix a list corruption in nvmet-tcp (Sagi Grimberg)
- Fix for a regression on DIO single bio async IO (Pavel)
- ioprio seteuid fix (Davidlohr)
- mtd fix that subsequently got reverted as it was broken, will get
re-done and submitted for the next round
- Two MD fixes via Song (Markus, zhangyue)"
* tag 'block-5.16-2021-12-10' of git://git.kernel.dk/linux-block:
Revert "mtd_blkdevs: don't scan partitions for plain mtdblock"
block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2)
md: fix double free of mddev->private in autorun_array()
md: fix update super 1.0 on rdev size change
nvmet-tcp: fix possible list corruption for unexpected command failure
block: fix single bio async DIO error handling
nvme: fix use after free when disconnecting a reconnecting ctrl
nvme-multipath: set ana_log_size to 0 after free ana_log_buf
mtd_blkdevs: don't scan partitions for plain mtdblock
nvme: report write pointer for a full zone as zone start + zone len
nvme: disable namespace access for unsupported metadata
nvme: show subsys nqn for duplicate cntlids
do_each_pid_thread(PIDTYPE_PGID) can race with a concurrent
change_pid(PIDTYPE_PGID) that can move the task from one hlist
to another while iterating. Serialize ioprio_get to take
the tasklist_lock in this case, just like it's set counterpart.
Fixes: d69b78ba1d (ioprio: grab rcu_read_lock in sys_ioprio_{set,get}())
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://lore.kernel.org/r/20211210182058.43417-1-dave@stgolabs.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Daniel Borkmann says:
====================
bpf 2021-12-08
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 29 files changed, 659 insertions(+), 80 deletions(-).
The main changes are:
1) Fix an off-by-two error in packet range markings and also add a batch of
new tests for coverage of these corner cases, from Maxim Mikityanskiy.
2) Fix a compilation issue on MIPS JIT for R10000 CPUs, from Johan Almbladh.
3) Fix two functional regressions and a build warning related to BTF kfunc
for modules, from Kumar Kartikeya Dwivedi.
4) Fix outdated code and docs regarding BPF's migrate_disable() use on non-
PREEMPT_RT kernels, from Sebastian Andrzej Siewior.
5) Add missing includes in order to be able to detangle cgroup vs bpf header
dependencies, from Jakub Kicinski.
6) Fix regression in BPF sockmap tests caused by missing detachment of progs
from sockets when they are removed from the map, from John Fastabend.
7) Fix a missing "no previous prototype" warning in x86 JIT caused by BPF
dispatcher, from Björn Töpel.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add selftests to cover packet access corner cases
bpf: Fix the off-by-two error in range markings
treewide: Add missing includes masked by cgroup -> bpf dependency
tools/resolve_btfids: Skip unresolved symbol warning for empty BTF sets
bpf: Fix bpf_check_mod_kfunc_call for built-in modules
bpf: Make CONFIG_DEBUG_INFO_BTF depend upon CONFIG_BPF_SYSCALL
mips, bpf: Fix reference to non-existing Kconfig symbol
bpf: Make sure bpf_disable_instrumentation() is safe vs preemption.
Documentation/locking/locktypes: Update migrate_disable() bits.
bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap
bpf, sockmap: Attach map progs to psock early for feature probes
bpf, x86: Fix "no previous prototype" warning
====================
Link: https://lore.kernel.org/r/20211208155125.11826-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BUG: KASAN: use-after-free in io_submit_one+0x496/0x2fe0 fs/aio.c:1882
CPU: 2 PID: 15100 Comm: syz-executor873 Not tainted 5.16.0-rc1-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7860+a7792d29
04/01/2014
Call Trace:
[...]
refcount_dec_and_test include/linux/refcount.h:333 [inline]
iocb_put fs/aio.c:1161 [inline]
io_submit_one+0x496/0x2fe0 fs/aio.c:1882
__do_sys_io_submit fs/aio.c:1938 [inline]
__se_sys_io_submit fs/aio.c:1908 [inline]
__x64_sys_io_submit+0x1c7/0x4a0 fs/aio.c:1908
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
__blkdev_direct_IO_async() returns errors from bio_iov_iter_get_pages()
directly, in which case upper layers won't be expecting ->ki_complete
to be called by the block layer and will terminate the request. However,
there is also bio_endio() leading to a second ->ki_complete and a double
free.
Fixes: 54a88eb838 ("block: add single bio async direct IO helper")
Reported-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c9eb786f6cef041e159e6287de131bec0719ad5c.1638907997.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kashyap reports high CPU usage in blk_mq_queue_tag_busy_iter() and callees
using megaraid SAS RAID card since moving to shared tags [0].
Previously, when shared tags was shared sbitmap, this function was less
than optimum since we would iter through all tags for all hctx's,
yet only ever match upto tagset depth number of rqs.
Since the change to shared tags, things are even less efficient if we have
parallel callers of blk_mq_queue_tag_busy_iter(). This is because in
bt_iter() -> blk_mq_find_and_get_req() there would be more contention on
accessing each request ref and tags->lock since they are now shared among
all HW queues.
Optimise by having separate calls to bt_for_each() for when we're using
shared tags. In this case no longer pass a hctx, as it is no longer
relevant, and teach bt_iter() about this.
Ming suggested something along the lines of this change, apart from a
different implementation.
[0] https://lore.kernel.org/linux-block/e4e92abbe9d52bcba6b8cc6c91c442cc@mail.gmail.com/
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reported-and-tested-by: Kashyap Desai <kashyap.desai@broadcom.com>
Fixes: e155b0c238 ("blk-mq: Use shared tags for shared sbitmap support")
Link: https://lore.kernel.org/r/1638794990-137490-4-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Typedefs busy_iter_fn and busy_tag_iter_fn are now identical, so delete
busy_iter_fn to reduce duplication.
It would be nicer to delete busy_tag_iter_fn, as the name busy_iter_fn is
less specific.
However busy_tag_iter_fn is used in many different parts of the tree,
unlike busy_iter_fn which is just use in block/, so just take the
straightforward path now, so that we could rename later treewide.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Kashyap Desai <kashyap.desai@broadcom.com>
Link: https://lore.kernel.org/r/1638794990-137490-3-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only user of blk_mq_hw_ctx blk_mq_hw_ctx argument is
blk_mq_rq_inflight().
Function blk_mq_rq_inflight() uses the hctx to find the associated request
queue to match against the request. However this same check is already
done in caller bt_iter(), so drop this check.
With that change there are no more users of busy_iter_fn blk_mq_hw_ctx
argument, so drop the argument.
Reviewed-by Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Kashyap Desai <kashyap.desai@broadcom.com>
Link: https://lore.kernel.org/r/1638794990-137490-2-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_run_dispatch_ops() is defined as one macro, and plug->mq_list
will be changed when running 'dispatch_ops', so add one local variable
for holding request queue.
Reported-and-tested-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 4cafe86c92 ("blk-mq: run dispatch lock once in case of issuing from list")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The operation protected via blk_mq_run_dispatch_ops() in blk_mq_run_hw_queue
won't sleep, so don't run might_sleep() for it.
Reported-and-tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It isn't necessary to call blk_mq_run_dispatch_ops() once for issuing
single request directly, and enough to do it one time when issuing from
whole list.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have switched to allocate srcu into request queue, so it is fine
to pass request queue to blk_mq_run_dispatch_ops().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case of BLK_MQ_F_BLOCKING, per-hctx srcu is used to protect dispatch
critical area. However, this srcu instance stays at the end of hctx, and
it often takes standalone cacheline, often cold.
Inside srcu_read_lock() and srcu_read_unlock(), WRITE is always done on
the indirect percpu variable which is allocated from heap instead of
being embedded, srcu->srcu_idx is read only in srcu_read_lock(). It
doesn't matter if srcu structure stays in hctx or request queue.
So switch to per-request-queue srcu for protecting dispatch, and this
way simplifies quiesce a lot, not mention quiesce is always done on the
request queue wide.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove hctx_lock and hctx_unlock, and add one helper of
blk_mq_run_dispatch_ops() to run code block defined in dispatch_ops
with rcu/srcu read held.
Compared with hctx_lock()/hctx_unlock():
1) remove 2 branch to 1, so we just need to check
(hctx->flags & BLK_MQ_F_BLOCKING) once when running one dispatch_ops
2) srcu_idx needn't to be touched in case of non-blocking
3) might_sleep_if() can be moved to the blocking branch
Also put the added blk_mq_run_dispatch_ops() in private header, so that
the following patch can use it out of blk-mq.c.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
refcount_t is not as expensive as it used to be, but it's still more
expensive than the io_uring method of using atomic_t and just checking
for potential over/underflow.
This borrows that same implementation, which in turn is based on the
mm implementation from Linus.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't call into generic_file_read_iter() if we know it's O_DIRECT, just
set it up ourselves and call our own handler. This avoids an indirect call
for O_DIRECT.
Fall back to filemap_read() if we fail.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cgroup.h (therefore swap.h, therefore half of the universe)
includes bpf.h which in turn includes module.h and slab.h.
Since we're about to get rid of that dependency we need
to clean things up.
v2: drop the cpu.h include from cacheinfo.h, it's not necessary
and it makes riscv sensitive to ordering of include files.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/20211120035253.72074-1-kuba@kernel.org/ # v1
Link: https://lore.kernel.org/all/20211120165528.197359-1-kuba@kernel.org/ # cacheinfo discussion
Link: https://lore.kernel.org/bpf/20211202203400.1208663-1-kuba@kernel.org
When we attempt to merge off the cached request path, we return NULL
if successful. This makes the caller believe that it's should allocate
a new request, and hence we end up with the bio both merged and associated
with a new request. This, predictably, leads to all sorts of crashes.
Pass in a pointer to the bio pointer, and clear it for the merge case.
Then the caller knows that the bio is already queued, and no new requests
need to get allocated.
Fixes: 5b13bc8a3f ("blk-mq: cleanup request allocation")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
