snd_soc_fixup_dai_links_platform_name() is assuming it is single platform.
return error if multi platforms.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rc7aoo9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_fixup_dai_links_platform_name() creates name first (A),
and checks setup target pointer (B), and set it (C).
We should check target pointer first IMO.
This patch exchange the order to (B) -> (A) -> (C).
int snd_soc_fixup_dai_links_platform_name(...)
{
...
/* set platform name for each dailink */
for_each_card_prelinks(card, i, dai_link) {
(A) name = devm_kstrdup(...);
if (!name)
return -ENOMEM;
(B) if (!dai_link->platforms)
return -EINVAL;
/* only single platform is supported for now */
(C) dai_link->platforms->name = name;
}
return 0;
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735wnaoon.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We shouldn't use dai_link->cpus/codecs/platforms directly,
because these are array now to supporting multi CPU/Codec/Platform.
This patch adds asoc_link_to_xxx() macro for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kh3aopc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform device is not registered by device tree or
cpu dai driver, it is registered by the rpmsg channel,
So add a dedicated machine driver to handle this case.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-7-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Platform driver based on rpmsg is the interface for sending and
receiving rpmsg to and from M core. It will tell the Cortex-M core
sound format/rate/channel, where is the data buffer, where is
the period size, when to start, when to stop and when suspend
or resume happen, each this behavior there is defined rpmsg
command.
Especially we designed the low power audio case, that is to
allocate a large buffer and fill the data, then Cortex-A core can go
to sleep mode, Cortex-M core continue to play the sound, when the
buffer is consumed, Cortex-M core will trigger the Cortex-A core to
wake up.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-6-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is used to accept the message from rpmsg audio
channel, and if this driver is probed, it will help to register
the platform driver, the platform driver will use this
audio channel to send and receive messages to and from Cortex-M
core.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-5-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fsl_rpmsg is a virtual audio device. Mapping to real hardware
devices are SAI, DMA controlled by Cortex M core. What we see from
Linux side is a device which provides audio service by rpmsg channel.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a cpu dai driver for rpmsg audio use case,
which is mainly used for getting the user's configuration
from devicetree and configure the clocks which is used by
Cortex-M core.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add snd_soc_pcm_component_ack back, which can be used to get an
updated buffer pointer in the platform driver.
On Asymmetric multiprocessor, this pointer can be sent to Cortex-M
core for audio processing.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Function hvfb_probe() calls hvfb_getmem(), expecting upon return that
info->apertures is either NULL or points to memory that should be freed
by framebuffer_release(). But hvfb_getmem() is freeing the memory and
leaving the pointer non-NULL, resulting in a double free if an error
occurs or later if hvfb_remove() is called.
Fix this by removing all kfree(info->apertures) calls in hvfb_getmem().
This will allow framebuffer_release() to free the memory, which follows
the pattern of other fbdev drivers.
Fixes: 3a6fb6c425 ("video: hyperv: hyperv_fb: Use physical memory for fb on HyperV Gen 1 VMs.")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210324103724.4189-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Not setting the ipv6 bit while destroying ipv6 listening servers may
result in potential fatal adapter errors due to lookup engine memory hash
errors. Therefore always set ipv6 field while destroying ipv6 listening
servers.
Fixes: 830662f6f0 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the value read from the REVID register in order to check for the
presence of the device. A read of all ones is treated as if the device
is not present, and hence probing is ended.
This fixes an issue when running as a Xen PVH dom0, where the ACPI
DSDT table is provided unmodified to dom0 and hence contains the
pinctrl devices, but the MMIO region(s) containing the device
registers might not be mapped in the guest physical memory map if such
region(s) are not exposed on a PCI device BAR or marked as reserved in
the host memory map.
Fixes: 91d898e51e ("pinctrl: intel: Convert capability list to features")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
An endpoint is not a device and it is recommended to use clocks property
in device node. RT5658 Codec binding already specifies the usage of
clocks property. Thus move the clocks from endpoint to device node.
Fixes: 5b4f632309 ("arm64: tegra: Audio graph sound card for Jetson AGX Xavier")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some news functions are added on HiSilicon uncore PMUs. Document them
to provide guidance on how to use them.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-10-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
On HiSilicon Hip09 platform, there is a PA (Protocol Adapter) module on
each chip SICL (Super I/O Cluster) which incorporates three Hydra interface
and facilitates the cache coherency between the dies on the chip. While PA
uncore PMU model is the same as other Hip09 PMU modules and many PMU events
are supported. Let's support the PMU driver using the HiSilicon uncore PMU
framework.
PA PMU supports the following filter functions:
* tracetag_en: allows user to count events according to tt_req or
tt_core set in L3C PMU. It's the same as other PMUs.
* srcid_cmd & srcid_msk: allows user to filter statistics that come from
specific CCL/ICL by configuration source ID.
* tgtid_cmd & tgtid_msk: it is the similar function to srcid_cmd &
srcid_msk. Both are used to check where the data comes from or go to.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-9-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
HiSilicon's Hip09 is comprised by multi-dies that can be connected by SLLC
module (Skyros Link Layer Controller), its has separate PMU registers which
the driver can program it freely and interrupt is supported to handle
counter overflow. Let's support its driver under the framework of HiSilicon
uncore PMU driver.
SLLC PMU supports the following filter functions:
* tracetag_en: allows user to count data according to tt_req or
tt_core set in L3C PMU.
* srcid_cmd & srcid_msk: allows user to filter statistics that come from
specific CCL/ICL by configuration source ID.
* tgtid_hi & tgtid_lo: it also supports event statistics that these
operations will go to the CCL/ICL by configuration target ID or
target ID range. It's the same as source ID with 11-bit width in
the SoC. More introduction is added in documentation:
Documentation/admin-guide/perf/hisi-pmu.rst
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-8-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
DDRC PMU's events are useful for performance profiling, but the events
are limited and counter is fixed. On HiSilicon Hip09 platform, PMU
counters are the programmable and more events are supported. Let's
add the DDRC PMU v2 driver.
Bandwidth events are exposed directly in driver and some more events
will listed in JSON file later.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-7-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
On HiSilicon Hip09 platform, some new functions are also supported on
HHA PMU.
* tracetag_en: it is the abbreviation of tracetag enable and allows user
to count events according to tt_req or tt_core set in L3C PMU.
* datasrc_skt: it is the abbreviation of data source from another
socket and it is used in the multi-chips. It's the same as L3C PMU.
* srcid_cmd & srcid_msk: pair of the fields are used to filter
statistics that come from the specific CCL/ICL by the configuration.
These are the abbreviation of source ID command and mask. The source
ID is 11-bit and detailed descriptions are documented in
Documentation/admin-guide/perf/hisi-pmu.rst.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-6-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
On HiSilicon Hip09 platform, some new functions are enhanced on L3C PMU:
* tt_req: it is the abbreviation of tracetag request and allows user to
count only read/write/atomic operations. tt_req is 3-bit and details are
listed in the hisi-pmu document.
$# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5
* tt_core: it is the abbreviation of tracetag core and allows user to
filter by core/thread within the cluster, it is a 8-bit bitmap that each
bit represents the corresponding core/thread in this L3C.
$# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0xf/ sleep 5
* datasrc_cfg: it is the abbreviation of data source configuration and
allows user to check where the data comes from, such as: from local DDR,
cross-die DDR or cross-socket DDR. Its is 5-bit and represents different
data source in the SoC.
$# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0xe/ sleep 5
* datasrc_skt: it is the abbreviation of data source from another socket
and is used in the multi-chips, if user wants to check the cross-socket
datat source, it shall be added in perf command. Only one bit is used to
control this.
$# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0x10,datasrc_skt=1/ sleep 5
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-5-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
For HiSilicon uncore PMU, more versions are supported and some variables
shall be added suffix to distinguish the version which are prepared for
the new drivers.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-4-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
On HiSilicon uncore PMU drivers, interrupt handling function and interrupt
registration function are very similar in differents PMU modules. Let's
refactor the frame.
Two new callbacks are added for the HW accessors:
* hisi_uncore_ops::get_int_status returns a bitmap of events which
have overflowed and raised an interrupt
* hisi_uncore_ops::clear_int_status clears the overflow status for a
specific event
These callback functions are used by a common IRQ handler,
hisi_uncore_pmu_isr().
One more function hisi_uncore_pmu_init_irq() is added to replace each
PMU initialization IRQ interface and simplify the code.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-3-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
The sanity check for counter index has been done in the function
hisi_uncore_pmu_get_event_idx, so remove the redundant interface
hisi_uncore_pmu_counter_valid() and sanity check.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-2-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
For each PMU event, there is a SMMU_EVENT_ATTR(xx, XX) and
&smmu_event_attr_xx.attr.attr. Let's redefine the SMMU_EVENT_ATTR
to simplify the smmu_pmu_events.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1612789498-12957-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
sys/stat.h has been included at line 23, so remove the
duplicate one at line 27.
linux/string.h has been included at line 7, so remove the
duplicate one at line 9.
time.h has been included at line 14, so remove the
duplicate one at line 28.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kael_w@yeah.net
Link: http://lore.kernel.org/lkml/20210323050139.287461-1-wanjiabing@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We haven't needed the test_irqs_unmasked macro since commit:
105fc33520 ("arm64: entry: move el1 irq/nmi logic to C")
... and as we convert more of the entry logic to C it is decreasingly
likely we'll need it in future, so let's remove the unused macro.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210323181201.18889-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for sysfs content and it's possible to overrun the buffer length.
Use sysfs_emit() function to ensures that no overrun is done.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1616148273-16374-4-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix the following coccicheck warning:
./drivers/perf/hisilicon/hisi_uncore_pmu.c:128:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/fsl_imx8_ddr_perf.c:173:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm_spe_pmu.c:129:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm_smmu_pmu.c:563:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm_dsu_pmu.c:149:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm_dsu_pmu.c:139:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cmn.c:563:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cmn.c:351:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-ccn.c:224:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cci.c:708:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cci.c:699:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cci.c:528:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cci.c:309:8-16: WARNING: use scnprintf or sprintf.
Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1616148273-16374-2-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
In IRQ handler interrupts are already disabled, hence no need
to repeat it. Even in the threaded case, which is disabled here,
it is not a problem because IRQ framework serializes descriptor
handling. Remove disabling IRQ part in the handler.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Address this GCC warning:
arch/x86/kernel/kprobes/core.c:940:1:
warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
940 | static int nokprobe_inline kprobe_is_ss(struct kprobe_ctlblk *kcb)
| ^~~~~~
[ mingo: Tidied up the changelog. ]
Fixes: 6256e668b7: ("x86/kprobes: Use int3 instead of debug trap for single-step")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210324144502.1154883-1-weiyongjun1@huawei.com
'struct evlist' has been declared at 10th line.
'struct comm' has been declared at 15th line.
Remove the duplicates
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kael_w@yeah.net
Link: http://lore.kernel.org/lkml/20210325043947.846093-1-wanjiabing@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that the read_ctr macro has been specialised for nVHE,
the whole CPU_FTR_REG_HYP_COPY infrastrcture looks completely
overengineered.
Simplify it by populating the two u64 quantities (MMFR0 and 1)
that the hypervisor need.
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In protected mode, late CPUs are not allowed to boot (enforced by
the PSCI relay). We can thus specialise the read_ctr macro to
always return a pre-computed, sanitised value. Special care is
taken to prevent the use of this custome version outside of
the protected mode.
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
mask is built in build_balance_mask() by for_each_cpu(i, sg_span), so
it must be a subset of sched_group_span(sg).
So the cpumask_and() call is redundant - remove it.
[ mingo: Adjusted the changelog a bit. ]
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Link: https://lore.kernel.org/r/20210325023140.23456-1-song.bao.hua@hisilicon.com
-1 is -EPERM which is a somewhat odd error to return from
sched_dynamic_write(). No other callers care about which negative
value is used.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210325004515.531631-2-linux@rasmusvillemoes.dk
Use the enum names which are also what is used in the switch() in
sched_dynamic_update().
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210325004515.531631-1-linux@rasmusvillemoes.dk
Remove unnecessary Kconfig symbol LEDS_BLINK
Improve Kconfig help text to make it more useful.
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Fix can_boost() to identify indirect jmp and others using range case
correctly.
Since the condition in switch statement is opcode & 0xf0, it can not
evaluate to 0xff case. This should be under the 0xf0 case. However,
there is no reason to use the conbinations of the bit-masked condition
and lower bit checking.
Use range case to clean up the switch statement too.
Fixes: 6256e668b7 ("x86/kprobes: Use int3 instead of debug trap for single-step")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/161666692308.1120877.4675552834049546493.stgit@devnote2
There are 2 bugs in the can_boost() function because of using
x86 insn decoder. Since the insn->opcode never has a prefix byte,
it can not find CS override prefix in it. And the insn->attr is
the attribute of the opcode, thus inat_is_address_size_prefix(
insn->attr) always returns false.
Fix those by checking each prefix bytes with for_each_insn_prefix
loop and getting the correct attribute for each prefix byte.
Also, this removes unlikely, because this is a slow path.
Fixes: a8d11cd071 ("kprobes/x86: Consolidate insn decoder users for copying code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/161666691162.1120877.2808435205294352583.stgit@devnote2
Enabling function_graph tracer on ARM causes kernel panic, because the
function graph tracer updates the "return address" of a function in order
to insert a trace callback on function exit, it saves the function's
original return address in a return trace stack, but cpu_suspend() may not
return through the normal return path.
cpu_suspend() will resume directly via the cpu_resume path, but the return
trace stack has been set-up by the subfunctions of cpu_suspend(), which
makes the "return address" inconsistent with cpu_suspend().
This patch refers to Commit de818bd452
("arm64: kernel: pause/unpause function graph tracer in cpu_suspend()"),
fixes the issue by pausing/resuming the function graph tracer on the thread
executing cpu_suspend(), so that the function graph tracer state is kept
consistent across functions that enter power down states and never return
by effectively disabling graph tracer while they are executing.
Signed-off-by: louis.wang <liang26812@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The commit 1879445dfa ("perf/core: Set event's default
::overflow_handler()") set a default event->overflow_handler in
perf_event_alloc(), and replace the check event->overflow_handler with
is_default_overflow_handler(), but one is missing.
Currently, the bp->overflow_handler can not be NULL. As a result,
enable_single_step() is always not invoked.
Comments from Zhen Lei:
https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210207105934.2001-1-thunder.leizhen@huawei.com/
Fixes: 1879445dfa ("perf/core: Set event's default ::overflow_handler()")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Wang Nan <wangnan0@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Clang's integrated assembler only accepts UAL syntax, rewrite the
instructions that were changed by RVCTv2.1. The document "Assembly
language changes after RVCTv2.1" was very helpful.
.syntax unified
directive is added, since -masm-syntax-unified is unreliable for older
but supported versions of GCC. See also:
commit fe09d9c641 ("ARM: 8852/1: uaccess: use unified assembler language syntax")
Link: https://developer.arm.com/documentation/dui0473/c/writing-arm-assembly-language/assembly-language-changes-after-rvctv2-1
Link: https://github.com/ClangBuiltLinux/linux/issues/1271
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
GNU as warns twice for this file:
Warning: using r15 results in unpredictable behaviour
via the Arm ARM:
K1.1.1 Overview of the constraints on Armv7 UNPREDICTABLE behaviors
The term UNPREDICTABLE describes a number of cases where the
architecture has a feature that software must not use.
Ard notes:
These are selftests that aim to ensure that kprobe never attempts to
replace the opcodes in question with a probe, but they are not
actually executed, or expected to occur in real code.
Link: https://github.com/ClangBuiltLinux/linux/issues/1271
Link: https://reviews.llvm.org/D95586
Reported-by: kernelci.org bot <bot@kernelci.org>
Suggested-by: Peter Smith <peter.smith@arm.com>
Suggested-by: Renato Golin <rengolin@systemcall.eu>
Suggested-by: David Spickett <david.spickett@linaro.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Since commit 30fdfb929e ("PCI: Add a call to pci_assign_irq() in
pci_device_probe()"), the PCI code will call the IRQ mapping function
whenever a PCI driver is probed. If these are marked as __init, this
causes an oops if a PCI driver is loaded or bound after the kernel has
initialised.
Fixes: 30fdfb929e ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
for_each_mem_range() uses a loop variable, yet looking into code it is
not just iteration counter but more complex entity which encodes
information about memblock. Thus condition i == 0 looks fragile.
Indeed, it broke boot of R-class platforms since it never took i == 0
path (due to i was set to 1). Fix that with restoring original flag
check.
Fixes: b10d6bca87 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The debugging code for kmap_local() doubles the number of per-CPU fixmap
slots allocated for kmap_local(), in order to use half of them as guard
regions. This causes the fixmap region to grow downwards beyond the start
of its reserved window if the supported number of CPUs is large, and collide
with the newly added virtual DT mapping right below it, which is obviously
not good.
One manifestation of this is EFI boot on a kernel built with NR_CPUS=32
and CONFIG_DEBUG_KMAP_LOCAL=y, which may pass the FDT in highmem, resulting
in block entries below the fixmap region that the fixmap code misidentifies
as fixmap table entries, and subsequently tries to dereference using a
phys-to-virt translation that is only valid for lowmem. This results in a
cryptic splat such as the one below.
ftrace: allocating 45548 entries in 89 pages
8<--- cut here ---
Unable to handle kernel paging request at virtual address fc6006f0
pgd = (ptrval)
[fc6006f0] *pgd=80000040207003, *pmd=00000000
Internal error: Oops: a06 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.11.0+ #382
Hardware name: Generic DT based system
PC is at cpu_ca15_set_pte_ext+0x24/0x30
LR is at __set_fixmap+0xe4/0x118
pc : [<c041ac9c>] lr : [<c04189d8>] psr: 400000d3
sp : c1601ed8 ip : 00400000 fp : 00800000
r10: 0000071f r9 : 00421000 r8 : 00c00000
r7 : 00c00000 r6 : 0000071f r5 : ffade000 r4 : 4040171f
r3 : 00c00000 r2 : 4040171f r1 : c041ac78 r0 : fc6006f0
Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none
Control: 30c5387d Table: 40203000 DAC: 00000001
Process swapper (pid: 0, stack limit = 0x(ptrval))
So let's limit CONFIG_NR_CPUS to 16 when CONFIG_DEBUG_KMAP_LOCAL=y. Also,
fix the BUILD_BUG_ON() check that was supposed to catch this, by checking
whether the region grows below the start address rather than above the end
address.
Fixes: 2a15ba82fa ("ARM: highmem: Switch to generic kmap atomic")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
On NVIDIA Carmel cores, CNP behaves differently than it does on standard
ARM cores. On Carmel, if two cores have CNP enabled and share an L2 TLB
entry created by core0 for a specific ASID, a non-shareable TLBI from
core1 may still see the shared entry. On standard ARM cores, that TLBI
will invalidate the shared entry as well.
This causes issues with patchsets that attempt to do local TLBIs based
on cpumasks instead of broadcast TLBIs. Avoid these issues by disabling
CNP support for NVIDIA Carmel cores.
Signed-off-by: Rich Wiley <rwiley@nvidia.com>
Link: https://lore.kernel.org/r/20210324002809.30271-1-rwiley@nvidia.com
[will: Fix pre-existing whitespace issue]
Signed-off-by: Will Deacon <will@kernel.org>
