Fix the following coccicheck report:
drivers/i2c/busses/i2c-stm32f7.c:2032:3-10 : platform_get_irq :
line 2032 is redundant because platform_get_irq() already prints an error
Remove dev_err() messages after platform_get_irq() failures.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Inspect a message's return value upon successful IVC transaction to
determine if the I2C transaction on the BPMP side was successful.
Heavily based on work by Timo Alho <talho@nvidia.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Only send "X1000_I2C_DC_STOP" when last byte, or it will cause
error when I2C write operation which should look like this:
device_addr + w, reg_addr, data;
But without this patch, it looks like this:
device_addr + w, reg_addr, device_addr + w, data;
Fixes: 21575a7a8d ("I2C: JZ4780: Add support for the X1000.")
Reported-by: 杨文龙 (Yang Wenlong) <ywltyut@sina.cn>
Tested-by: 杨文龙 (Yang Wenlong) <ywltyut@sina.cn>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for arch/arm/mach-omap1/timer.c follows this syntax, but the
content inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warning from kernel-doc:
"warning: expecting prototype for OMAP1 Dual(). Prototype was for OMAP1610_GPTIMER1_BASE() instead"
Provide a simple fix by replacing this occurrence with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for arch/arm/mach-omap2/omap_twl.c follows this syntax, but the
content inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warning from kernel-doc:
"warning: wrong kernel-doc identifier on line:
* OMAP and TWL PMIC specific initializations."
Provide a simple fix by replacing this occurrence with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lifu Chen <chenlifu@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Based on linux-gpio discussion [1], it is best practice to make the
gpio-line-names unique. Generic names like "[ethernet]" are replaced
with the name of the unique signal on the AM3358 SoC ball corresponding
to the gpio line. "[NC]" is also renamed to the standard "NC" name to
represent "not connected".
[1] https://lore.kernel.org/linux-gpio/20201216195357.GA2583366@x1/
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This reverts commit 675bceb097 ("powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc")
All the related issues are fixed as of commit:
f14312e1ed ("mm/debug_vm_pgtable: avoid doing memory allocation with pgtable_t mapped.")
Hence re-enable it.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318034855.74513-1-aneesh.kumar@linux.ibm.com
The newly introduced -s command line option starts an interactive shell.
If a command is specified, the shell is started after the command
finishes executing. It's useful to have a shell especially when
debugging failing tests or developing new tests.
Since the user may terminate the VM forcefully, an extra "sync" is added
after the execution of the command to persist any logs from the command
into the log file.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210323014752.3198283-1-kpsingh@kernel.org
When we mount an unclean f2fs image in a readonly block device, let's
make mount() succeed only when there is no recoverable data in that
image, otherwise after mount(), file fsyned won't be recovered as user
expected.
Fixes: 938a184265 ("f2fs: give a warning only for readonly partition")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The vio bus is a fake bus, which we use on pseries LPARs (guests) to
discover devices provided by the hypervisor. There's no need or sense
in creating the vio bus on bare metal systems.
Which is why commit 4336b93378 ("powerpc/pseries: Make vio and
ibmebus initcalls pseries specific") made the initialisation of the
vio bus only happen in LPARs.
However as a result of that commit we now see errors at boot on bare
metal systems:
Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized.
Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized.
This happens because those drivers are built-in, and are calling
vio_register_driver(). It in turn calls driver_register() with a
reference to vio_bus_type, but we haven't registered vio_bus_type with
the driver core.
Fix it by also guarding vio_register_driver() with a check to see if
we are on pseries.
Fixes: 4336b93378 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316010938.525657-1-mpe@ellerman.id.au
As recommended by Stephen Boyd, convert the Agilex/Stratix10/n5x clock
driver to use the clk_hw registration method.
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210302214151.1333447-3-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As recommended by Stephen Boyd, convert the Arria10 clock driver to use
the clk_hw registration method.
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210302214151.1333447-2-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As recommended by Stephen Boyd, convert the cyclone5/arria5 clock driver
to use the clk_hw registration method.
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210302214151.1333447-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Iff platform_get_irq() returns 0, ahci_platform_init_host() would return 0
early (as if the call was successful). Override IRQ0 with -EINVAL instead
as the 'libata' regards 0 as "no IRQ" (thus polling) anyway...
Fixes: c034640a32 ("ata: libahci: properly propagate return value of platform_get_irq()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/4448c8cc-331f-2915-0e17-38ea34e251c8@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function mv_platform_probe() neglects to check the results of the
calls to platform_get_irq() and irq_of_parse_and_map() and blithely
passes them to ata_host_activate() -- while the latter only checks
for IRQ0 (treating it as a polling mode indicattion) and passes the
negative values to devm_request_irq() causing it to fail as it takes
unsigned values for the IRQ #...
Add to mv_platform_probe() the proper IRQ checks to pass the positive IRQ
#s to ata_host_activate(), propagate upstream the negative error codes,
and override the IRQ0 with -EINVAL (as we don't want the polling mode).
Fixes: f351b2d638 ("sata_mv: Support SoC controllers")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/51436f00-27a1-e20b-c21b-0e817e0a7c86@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_acpi.c:38: warning: Function parameter or member 'link' not described in 'pacpi_pre_reset'
drivers/ata/pata_acpi.c:38: warning: Excess function parameter 'ap' description in 'pacpi_pre_reset'
drivers/ata/pata_acpi.c:74: warning: Function parameter or member 'ap' not described in 'pacpi_discover_modes'
drivers/ata/pata_acpi.c:74: warning: Excess function parameter 'mask' description in 'pacpi_discover_modes'
drivers/ata/pata_acpi.c:239: warning: Function parameter or member 'id' not described in 'pacpi_init_one'
drivers/ata/pata_acpi.c:239: warning: Excess function parameter 'ent' description in 'pacpi_init_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-16-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/libata-acpi.c:493: warning: expecting prototype for ata_acpi_gtm_xfermode(). Prototype was for ata_acpi_gtm_xfermask() instead
drivers/ata/libata-acpi.c:648: warning: Function parameter or member 'prev_gtf' not described in 'ata_acpi_run_tf'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-15-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/sata_mv.c:1929: warning: expecting prototype for mv_bmdma_stop(). Prototype was for mv_bmdma_stop_ap() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mark Lord <mlord@pobox.com>
Cc: ALWAYS copy <linux-ide@vger.kernel.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-14-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_cs5530.c:283: warning: Function parameter or member 'pdev' not described in 'cs5530_init_one'
drivers/ata/pata_cs5530.c:283: warning: Excess function parameter 'dev' description in 'cs5530_init_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-13-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_legacy.c:606: warning: expecting prototype for opt82c465mv_qc_issue(). Prototype was for opti82c46x_qc_issue() instead
drivers/ata/pata_legacy.c:933: warning: Function parameter or member 'probe' not described in 'legacy_init_one'
drivers/ata/pata_legacy.c:933: warning: Excess function parameter 'pl' description in 'legacy_init_one'
drivers/ata/pata_legacy.c:1024: warning: Function parameter or member 'primary' not described in 'legacy_check_special_cases'
drivers/ata/pata_legacy.c:1024: warning: Function parameter or member 'secondary' not described in 'legacy_check_special_cases'
drivers/ata/pata_legacy.c:1024: warning: Excess function parameter 'master' description in 'legacy_check_special_cases'
drivers/ata/pata_legacy.c:1024: warning: Excess function parameter 'master' description in 'legacy_check_special_cases'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Colten Edwards <pje120@cs.usask.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-12-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/ata_generic.c:164: warning: expecting prototype for ata_generic_init(). Prototype was for ata_generic_init_one() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Hat Inc <alan@redhat.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-11-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_opti.c:82: warning: Function parameter or member 'val' not described in 'opti_write_reg'
drivers/ata/pata_opti.c:82: warning: Excess function parameter 'value' description in 'opti_write_reg'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jaromir Koutek <miri@punknet.cz>
Cc: Jan Harkes <jaharkes@cwi.nl>
Cc: Mark Lord <mlord@pobox.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-10-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_sl82c105.c:191: warning: expecting prototype for sl82c105_bmdma_end(). Prototype was for sl82c105_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-9-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_piccolo.c:87: warning: expecting prototype for ata_tosh_init(). Prototype was for ata_tosh_init_one() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Hat Inc <alan@redhat.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-8-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_via.c:675: warning: Function parameter or member 'pdev' not described in 'via_reinit_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-7-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_it821x.c:346: warning: expecting prototype for it821x_passthru_dma_start(). Prototype was for it821x_passthru_bmdma_start() instead
drivers/ata/pata_it821x.c:369: warning: expecting prototype for it821x_passthru_dma_stop(). Prototype was for it821x_passthru_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-6-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_triflex.c:143: warning: expecting prototype for triflex_dma_start(). Prototype was for triflex_bmdma_start() instead
drivers/ata/pata_triflex.c:159: warning: Function parameter or member 'qc' not described in 'triflex_bmdma_stop'
drivers/ata/pata_triflex.c:159: warning: expecting prototype for triflex_dma_stop(). Prototype was for triflex_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Torben Mathiasen <torben.mathiasen@hp.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-5-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_sis.c:124: warning: Excess function parameter 'deadline' description in 'sis_133_cable_detect'
drivers/ata/pata_sis.c:529: warning: Function parameter or member 'mask' not described in 'sis_133_mode_filter'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Lionel Bouton <Lionel.Bouton@inet6.fr>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: "L.C. Chang" <lcchang@sis.com.tw>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-4-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_sil680.c:68: warning: Function parameter or member 'adev' not described in 'sil680_seldev'
drivers/ata/pata_sil680.c:254: warning: Function parameter or member 'try_mmio' not described in 'sil680_init_chip'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Red Hat <alan@redhat.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-3-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_pdc202xx_old.c:127: warning: expecting prototype for pdc202xx_configure_dmamode(). Prototype was for pdc202xx_set_dmamode() instead
drivers/ata/pata_pdc202xx_old.c:228: warning: expecting prototype for pdc2026x_bmdma_end(). Prototype was for pdc2026x_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-2-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In this patch, we will add two new mount options: "gc_merge" and
"nogc_merge", when background_gc is on, "gc_merge" option can be
set to let background GC thread to handle foreground GC requests,
it can eliminate the sluggish issue caused by slow foreground GC
operation when GC is triggered from a process with limited I/O
and CPU resources.
Original idea is from Xiang.
Signed-off-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Lin <dslin1010@gmail.com>
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When cleared, the 'force' parameter in nexthop bucket replacement
notifications indicates that a driver should try to perform an atomic
replacement. Meaning, only update the contents of the bucket if it is
inactive.
Since mlxsw only queries buckets' activity once every second, there is
no point in trying an atomic replacement if the idle timer interval is
smaller than 1 second.
Currently, mlxsw ignores the original value of 'force' and will always
try an atomic replacement if the idle timer is not smaller than 1
second.
Fix this by taking the original value of 'force' into account and never
promoting a non-atomic replacement to an atomic one.
Fixes: 617a77f044 ("mlxsw: spectrum_router: Add nexthop bucket replacement support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
MPTCP: Allow initial subflow to be disconnected
An MPTCP connection is aggregated from multiple TCP subflows, and can
involve multiple IP addresses on either peer. The addresses used in the
initial subflow connection are assigned address id 0 on each side of the
link. More addresses can be added and shared with the peer using address
IDs of 1 or larger. MPTCP in Linux shares non-zero address IDs across
all MPTCP connections in a net namespace, which allows userspace to
manage subflow connections across a number of sockets. However, this
makes the address with id 0 a special case, since the IP address
associated with id 0 is potentially different for each socket.
This patch set allows the initial subflow to be disconnected when
userspace specifies an address to remove using both id 0 and an IP
address, or when the peer sends an RM_ADDR for id 0.
Patches 1 and 3 implement the change for requests from the peer and
userspace, respectively.
Patch 2 consolidates some code for disconnecting subflows.
Patches 4-6 update the self tests to cover removal of subflows using
address id 0.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the testcases for removing the id 0 subflow and the id 0
address.
In do_transfer, use the removing addresses number '9' for deleting the id
0 address.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the id 0 address, different MPTCP connections could be using
different IP addresses for id 0.
This patch added an extra argument IP address for del_addr when
using id 0.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IDs are supposed to be between 0 and 255.
In pm_nl_ctl, for both the 'add' and 'get' instruction, the ID is casted
in a u_int8_t. So if we give 256, we will delete ID 0. Obviously, the
goal is not to delete this ID by giving 256.
We could modify pm_nl_ctl and stop if the ID is negative or higher than
255 but probably better not to increase the number of lines for such
things in this tool which is only used in selftests. Instead, we use it
within the limits.
This modification also means that we will no longer add a new ID for the
2nd entry. That's why we removed an expected entry from the dump and
introduced with
commit dc8eb10e95 ("selftests: mptcp: add testcases for setting the address ID").
So now we delete ID 9 like before and we add entries for IDs 10 to 255
that are deleted just after.
Note that this could be seen as a fix but it was not really an issue so
far: we were simply playing with ID 0/1 once again. With the following
commit ("selftests: mptcp: add addr argument for del_addr"), it will be
different because ID 0 is going to required an address. We don't want
errors when trying to delete ID 0 without the address argument.
Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new function mptcp_nl_remove_id_zero_address to
remove the id 0 address.
In this function, traverse all the existing msk sockets to find the
msk matched the input IP address. Then fill the removing list with
id 0, and pass it to mptcp_pm_remove_addr and mptcp_pm_remove_subflow.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some duplicate code in mptcp_pm_nl_rm_addr_received and
mptcp_pm_nl_rm_subflow_received. This patch unifies them into a new
function named mptcp_pm_nl_rm_addr_or_subflow. In it, use the input
parameter rm_type to identify it's now removing an address or a subflow.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's only one subflow involving the non-zero id address, but there
may be multi subflows involving the id 0 address.
Here's an example:
local_id=0, remote_id=0
local_id=1, remote_id=0
local_id=0, remote_id=1
If the removing address id is 0, all the subflows involving the id 0
address need to be removed.
In mptcp_pm_nl_rm_addr_received/mptcp_pm_nl_rm_subflow_received, the
"break" prevents the iteration to the next subflow, so this patch
dropped them.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 924a9bc362 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
added a call to dev_parse_header_protocol() but mac_header is not yet set.
This means that eth_hdr() reads complete garbage, and syzbot complained about it [1]
This patch resets mac_header earlier, to get more coverage about this change.
Audit of virtio_net_hdr_to_skb() callers shows that this change should be safe.
[1]
BUG: KASAN: use-after-free in eth_header_parse_protocol+0xdc/0xe0 net/ethernet/eth.c:282
Read of size 2 at addr ffff888017a6200b by task syz-executor313/8409
CPU: 1 PID: 8409 Comm: syz-executor313 Not tainted 5.12.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232
__kasan_report mm/kasan/report.c:399 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
eth_header_parse_protocol+0xdc/0xe0 net/ethernet/eth.c:282
dev_parse_header_protocol include/linux/netdevice.h:3177 [inline]
virtio_net_hdr_to_skb.constprop.0+0x99d/0xcd0 include/linux/virtio_net.h:83
packet_snd net/packet/af_packet.c:2994 [inline]
packet_sendmsg+0x2325/0x52b0 net/packet/af_packet.c:3031
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
sock_no_sendpage+0xf3/0x130 net/core/sock.c:2860
kernel_sendpage.part.0+0x1ab/0x350 net/socket.c:3631
kernel_sendpage net/socket.c:3628 [inline]
sock_sendpage+0xe5/0x140 net/socket.c:947
pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364
splice_from_pipe_feed fs/splice.c:418 [inline]
__splice_from_pipe+0x43e/0x8a0 fs/splice.c:562
splice_from_pipe fs/splice.c:597 [inline]
generic_splice_sendpage+0xd4/0x140 fs/splice.c:746
do_splice_from fs/splice.c:767 [inline]
do_splice+0xb7e/0x1940 fs/splice.c:1079
__do_splice+0x134/0x250 fs/splice.c:1144
__do_sys_splice fs/splice.c:1350 [inline]
__se_sys_splice fs/splice.c:1332 [inline]
__x64_sys_splice+0x198/0x250 fs/splice.c:1332
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
Fixes: 924a9bc362 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Balazs Nemeth <bnemeth@redhat.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should not be advertising EEE for modes that we do not support,
correct that oversight by looking at the PHY device supported linkmodes.
Fixes: 99cec8a4dd ("net: phy: broadcom: Allow enabling or disabling of EEE")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sysctl_icmp_echo_enable_probe is an u8.
ipv4_net_table entry should use
.maxlen = sizeof(u8).
.proc_handler = proc_dou8vec_minmax,
Fixes: f1b8fa9fa5 ("net: add sysctl for enabling RFC 8335 PROBE messages")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
ionic: code cleanup for heartbeat, dma error counts, sizeof, stats
These patches are a few more bits of code cleanup found in
testing and review: count all our dma error instances, make
better use of sizeof, fix a race in our device heartbeat check,
and clean up code formatting in the ethtool stats collection.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
