When feature VIRTIO_NET_F_MTU is negotiated on mlx5_vdpa,
22 extra bytes worth of MTU length is shown in guest.
This is because the mlx5_query_port_max_mtu API returns
the "hardware" MTU value, which does not just contain the
Ethernet payload, but includes extra lengths starting
from the Ethernet header up to the FCS altogether.
Fix the MTU so packets won't get dropped silently.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
drivers/usb/core/hub.c: usb_new_device() contains the following:
/* By default, forbid autosuspend for all devices. It will be
* allowed for hubs during binding.
*/
usb_disable_autosuspend(udev);
So for anything which is not a hub, such as btusb devices, autosuspend is
disabled by default and we must call usb_enable_autosuspend(udev) to
enable it.
This means that the "Fix the autosuspend enable and disable" commit,
which drops the usb_enable_autosuspend() call when the enable_autosuspend
module option is true, is completely wrong, revert it.
This reverts commit 7bd9fb058d.
Cc: Hui Wang <hui.wang@canonical.com>
Fixes: 7bd9fb058d ("Bluetooth: btusb: Fix the autosuspend enable and disable")
Acked-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During load-balance, groups classified as group_misfit_task are filtered
out if they do not pass
group_smaller_max_cpu_capacity(<candidate group>, <local group>);
which itself employs fits_capacity() to compare the sgc->max_capacity of
both groups.
Due to the underlying margin, fits_capacity(X, 1024) will return false for
any X > 819. Tough luck, the capacity_orig's on e.g. the Pixel 4 are
{261, 871, 1024}. If a CPU-bound task ends up on one of those "medium"
CPUs, misfit migration will never intentionally upmigrate it to a CPU of
higher capacity due to the aforementioned margin.
One may argue the 20% margin of fits_capacity() is excessive in the advent
of counter-enhanced load tracking (APERF/MPERF, AMUs), but one point here
is that fits_capacity() is meant to compare a utilization value to a
capacity value, whereas here it is being used to compare two capacity
values. As CPU capacity and task utilization have different dynamics, a
sensible approach here would be to add a new helper dedicated to comparing
CPU capacities.
Also note that comparing capacity extrema of local and source sched_group's
doesn't make much sense when at the day of the day the imbalance will be
pulled by a known env->dst_cpu, whose capacity can be anywhere within the
local group's capacity extrema.
While at it, replace group_smaller_{min, max}_cpu_capacity() with
comparisons of the source group's min/max capacity and the destination
CPU's capacity.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Link: https://lkml.kernel.org/r/20210407220628.3798191-4-valentin.schneider@arm.com
When triggering an active load balance, sd->nr_balance_failed is set to
such a value that any further can_migrate_task() using said sd will ignore
the output of task_hot().
This behaviour makes sense, as active load balance intentionally preempts a
rq's running task to migrate it right away, but this asynchronous write is
a bit shoddy, as the stopper thread might run active_load_balance_cpu_stop
before the sd->nr_balance_failed write either becomes visible to the
stopper's CPU or even happens on the CPU that appended the stopper work.
Add a struct lb_env flag to denote active balancing, and use it in
can_migrate_task(). Remove the sd->nr_balance_failed write that served the
same purpose. Cleanup the LBF_DST_PINNED active balance special case.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210407220628.3798191-3-valentin.schneider@arm.com
During load balance, LBF_SOME_PINNED will be set if any candidate task
cannot be detached due to CPU affinity constraints. This can result in
setting env->sd->parent->sgc->group_imbalance, which can lead to a group
being classified as group_imbalanced (rather than any of the other, lower
group_type) when balancing at a higher level.
In workloads involving a single task per CPU, LBF_SOME_PINNED can often be
set due to per-CPU kthreads being the only other runnable tasks on any
given rq. This results in changing the group classification during
load-balance at higher levels when in reality there is nothing that can be
done for this affinity constraint: per-CPU kthreads, as the name implies,
don't get to move around (modulo hotplug shenanigans).
It's not as clear for userspace tasks - a task could be in an N-CPU cpuset
with N-1 offline CPUs, making it an "accidental" per-CPU task rather than
an intended one. KTHREAD_IS_PER_CPU gives us an indisputable signal which
we can leverage here to not set LBF_SOME_PINNED.
Note that the aforementioned classification to group_imbalance (when
nothing can be done) is especially problematic on big.LITTLE systems, which
have a topology the likes of:
DIE [ ]
MC [ ][ ]
0 1 2 3
L L B B
arch_scale_cpu_capacity(L) < arch_scale_cpu_capacity(B)
Here, setting LBF_SOME_PINNED due to a per-CPU kthread when balancing at MC
level on CPUs [0-1] will subsequently prevent CPUs [2-3] from classifying
the [0-1] group as group_misfit_task when balancing at DIE level. Thus, if
CPUs [0-1] are running CPU-bound (misfit) tasks, ill-timed per-CPU kthreads
can significantly delay the upgmigration of said misfit tasks. Systems
relying on ASYM_PACKING are likely to face similar issues.
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
[Use kthread_is_per_cpu() rather than p->nr_cpus_allowed]
[Reword changelog]
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210407220628.3798191-2-valentin.schneider@arm.com
Mel Gorman did some nice work in 9fe1f127b9 ("sched/fair: Merge
select_idle_core/cpu()"), resulting in the kernel being more efficient
at finding an idle CPU, and in tasks spending less time waiting to be
run, both according to the schedstats run_delay numbers, and according
to measured application latencies. Yay.
The flip side of this is that we see more task migrations (about 30%
more), higher cache misses, higher memory bandwidth utilization, and
higher CPU use, for the same number of requests/second.
This is most pronounced on a memcache type workload, which saw a
consistent 1-3% increase in total CPU use on the system, due to those
increased task migrations leading to higher L2 cache miss numbers, and
higher memory utilization. The exclusive L3 cache on Skylake does us
no favors there.
On our web serving workload, that effect is usually negligible.
It appears that the increased number of CPU migrations is generally a
good thing, since it leads to lower cpu_delay numbers, reflecting the
fact that tasks get to run faster. However, the reduced locality and
the corresponding increase in L2 cache misses hurts a little.
The patch below appears to fix the regression, while keeping the
benefit of the lower cpu_delay numbers, by reintroducing
select_idle_smt with a twist: when a socket has no idle cores, check
to see if the sibling of "prev" is idle, before searching all the
other CPUs.
This fixes both the occasional 9% regression on the web serving
workload, and the continuous 2% CPU use regression on the memcache
type workload.
With Mel's patches and this patch together, task migrations are still
high, but L2 cache misses, memory bandwidth, and CPU time used are
back down to what they were before. The p95 and p99 response times for
the memcache type application improve by about 10% over what they were
before Mel's patches got merged.
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210326151932.2c187840@imladris.surriel.com
Use the port struct device rather than tty class device for debugging.
Note that while USB serial doesn't support serdev yet (due to serdev not
handling hotplugging), serdev ttys do not have a corresponding class
device and would have been logged using a "(NULL device *):" prefix.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Block bitmap prefetching is needed for these allocator optimization
data structures to get populated and provide better group scanning
order. So, turn it on bu default. prefetch_block_bitmaps mount option
is now marked as removed and a new option no_prefetch_block_bitmaps is
added to disable block bitmap prefetching.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of traversing through groups linearly, scan groups in specific
orders at cr 0 and cr 1. At cr 0, we want to find groups that have the
largest free order >= the order of the request. So, with this patch,
we maintain lists for each possible order and insert each group into a
list based on the largest free order in its buddy bitmap. During cr 0
allocation, we traverse these lists in the increasing order of largest
free orders. This allows us to find a group with the best available cr
0 match in constant time. If nothing can be found, we fallback to cr 1
immediately.
At CR1, the story is slightly different. We want to traverse in the
order of increasing average fragment size. For CR1, we maintain a rb
tree of groupinfos which is sorted by average fragment size. Instead
of traversing linearly, at CR1, we traverse in the order of increasing
average fragment size, starting at the most optimal group. This brings
down cr 1 search complexity to log(num groups).
For cr >= 2, we just perform the linear search as before. Also, in
case of lock contention, we intermittently fallback to linear search
even in CR 0 and CR 1 cases. This allows us to proceed during the
allocation path even in case of high contention.
There is an opportunity to do optimization at CR2 too. That's because
at CR2 we only consider groups where bb_free counter (number of free
blocks) is greater than the request extent size. That's left as future
work.
All the changes introduced in this patch are protected under a new
mount option "mb_optimize_scan".
With this patchset, following experiment was performed:
Created a highly fragmented disk of size 65TB. The disk had no
contiguous 2M regions. Following command was run consecutively for 3
times:
time dd if=/dev/urandom of=file bs=2M count=10
Here are the results with and without cr 0/1 optimizations introduced
in this patch:
|---------+------------------------------+---------------------------|
| | Without CR 0/1 Optimizations | With CR 0/1 Optimizations |
|---------+------------------------------+---------------------------|
| 1st run | 5m1.871s | 2m47.642s |
| 2nd run | 2m28.390s | 0m0.611s |
| 3rd run | 2m26.530s | 0m1.255s |
|---------+------------------------------+---------------------------|
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A few arrays in mballoc.c use the total number of valid orders as
their size. Currently, this value is set as "sb->s_blocksize_bits +
2". This makes code harder to read. So, instead add a new macro
MB_NUM_ORDERS(sb) to make the code more readable.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before this patch, the function parse_options() was returning
journal_devnum and journal_ioprio variables to the caller. This patch
generalizes that interface to allow parse_options to return any parsed
options to return back to the caller. In this patch series, it gets
used to capture the value of "mb_optimize_scan=%u" mount option.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
s_mb_buddies_generated gets used later in this patch series to
determine if the cr 0 and cr 1 optimziations should be performed or
not. Currently, s_mb_buddies_generated is protected under a
spin_lock. In the allocation path, it is better if we don't depend on
the lock and instead read the value atomically. In order to do that,
we drop s_bal_lock altogether and we convert the only two protected
fields by it s_mb_buddies_generated and s_mb_generation_time to atomic
type.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit <50122847007> ("ext4: fix check to prevent initializing reserved
inodes") check the block group zero and prevent initializing reserved
inodes. But in some special cases, the reserved inode may not all belong
to the group zero, it may exist into the second group if we format
filesystem below.
mkfs.ext4 -b 4096 -g 8192 -N 1024 -I 4096 /dev/sda
So, it will end up triggering a false positive report of a corrupted
file system. This patch fix it by avoid check reserved inodes if no free
inode blocks will be zeroed.
Cc: stable@kernel.org
Fixes: 5012284700 ("ext4: fix check to prevent initializing reserved inodes")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210331121516.2243099-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Quanyang Wang <quanyang.wang@windriver.com>:
From: Quanyang Wang <quanyang.wang@windriver.com>
Hello,
This series fix some issues that occurs when the gqspi driver switches to spi-mem framework.
Hi Amit,
I rewrite the "Subject" and "commit message" of these patches, so they
look different from the ones which you reviewed before. I still keep
your "Reviewed-by" and hope you will not mind.
Regards,
Quanyang Wang
Quanyang Wang (4):
spi: spi-zynqmp-gqspi: use wait_for_completion_timeout to make
zynqmp_qspi_exec_op not interruptible
spi: spi-zynqmp-gqspi: add mutex locking for exec_op
spi: spi-zynqmp-gqspi: transmit dummy circles by using the
controller's internal functionality
spi: spi-zynqmp-gqspi: fix incorrect operating mode in
zynqmp_qspi_read_op
drivers/spi/spi-zynqmp-gqspi.c | 53 +++++++++++++++++-----------------
1 file changed, 27 insertions(+), 26 deletions(-)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to
deal with usage counter") added a new runtime-PM API function without
updating the documentation in runtime_pm.rst.
Add the missing documentation.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because pstate.max_freq is always equal to the product of
pstate.max_pstate and pstate.scaling and, analogously,
pstate.turbo_freq is always equal to the product of
pstate.turbo_pstate and pstate.scaling, the result of the
max_policy_perf computation in intel_pstate_update_perf_limits() is
always equal to the quotient of policy_max and pstate.scaling,
regardless of whether or not turbo is disabled. Analogously, the
result of min_policy_perf in intel_pstate_update_perf_limits() is
always equal to the quotient of policy_min and pstate.scaling.
Accordingly, intel_pstate_update_perf_limits() need not check
whether or not turbo is enabled at all and in order to compute
max_policy_perf and min_policy_perf it can always divide policy_max
and policy_min, respectively, by pstate.scaling. Make it do so.
While at it, move the definition and initialization of the
turbo_max local variable to the code branch using it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Since debugfs_allow is only set at boot time during __init, make it
read-only after being set.
Fixes: a24c6f7bc9 ("debugfs: Add access restriction option")
Cc: Peter Enderborg <peter.enderborg@sony.com>
Reviewed-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210405213959.3079432-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From the series cover letter:
Kernel modules are currently only signed when CONFIG_MODULE_SIG is enabled.
The kernel module signing key is a self-signed CA only loaded onto the
.builtin_trusted_key keyring. On secure boot enabled systems with an arch
specific IMA policy enabled, but without MODULE_SIG enabled, kernel modules
are not signed, nor is the kernel module signing public key loaded onto the
IMA keyring.
In order to load the the kernel module signing key onto the IMA trusted
keyring ('.ima'), the certificate needs to be signed by a CA key either on
the builtin or secondary keyrings. The original version of this patch set
created and loaded a kernel-CA key onto the builtin keyring. The kernel-CA
key signed the kernel module signing key, allowing it to be loaded onto the
IMA trusted keyring.
However, missing from this version was support for the kernel-CA to sign the
hardware token certificate. Adding that support would add additional
complexity.
Since the kernel module signing key is embedded into the Linux kernel at
build time, instead of creating and loading a kernel-CA onto the builtin
trusted keyring, this version makes an exception and allows the
self-signed kernel module signing key to be loaded directly onto the
trusted IMA keyring.
The kernel currently only loads the kernel module signing key onto the
builtin trusted keyring. Load the module signing key onto the IMA keyring
as well.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The kernel build process currently only signs kernel modules when
MODULE_SIG is enabled. Also, sign the kernel modules at build time when
IMA_APPRAISE_MODSIG is enabled.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The "mrproper" target is still looking for build time generated keys in
the kernel root directory instead of certs directory. Fix the path and
remove the names of the files which are no longer generated.
Fixes: cfc411e7ff ("Move certificate handling to its own directory")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
remove obsolete MSG_8192C macro definitions.
MSG_8192C is a private trace mechanism macro and is deactivated.
(i.e. the default behaviour is _do nothing_)
The only way to activate it is to manually define a debug
symbol.
So just remove it.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/97f38f269e8dabb3dd7464d49022a62cd9773657.1617971593.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove commented out MSG_8192C log.
MSG_8192C is a private trace mechanism macro and is deactivated.
(i.e. the default behaviour is _do nothing_)
The only way to activate it is to manually define a debug
symbol.
So just remove it.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/845969563d7c90d1b7aa3215ae29dd91afc5100c.1617971592.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove all MSG_8192C logs.
MSG_8192C is a private trace mechanism macro and is deactivated.
(i.e. the default behaviour is _do nothing_)
The only way to activate it is to manually define a debug
symbol.
So just remove it.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/fa7f52aa90928dc86b3249ca9c5b27f92c2b071b.1617971592.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix following kernel test robot warning:
At top level:
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:36:27:
warning: 'iw_operation_mode' defined but not used
[-Wunused-const-variable=]
36 | static const char * const iw_operation_mode[] = {
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/05cc97a114269ee55ac9a91c61493c885fcc0193.1617962215.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix following kernel test robot warning:
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:
In function ‘rtw_wx_set_mlme’:
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:1128:6:
warning: variable ‘reason’ set but
not used [-Wunused-but-set-variable]
u16 reason;
^~~~~~
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/6211c4177a9ef1e677987c9ebac445df08605f40.1617962215.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix following kernel test robot warning:
At top level:
drivers/staging/rtl8723bs/include/rtw_security.h:336:28:
warning: 'K' defined but not used [-Wunused-const-variable=]
336 | static const unsigned long K[64] = {
| ^
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/819680ab87bbe543aba966f1fe47b209d3d8a69f.1617962215.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove set but unused variable. Fix W=1 compiler warning:
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:
In function ‘rtw_dbg_port’:
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:2443:19:
warning: variable ‘psta’ set but not used [-Wunused-but-set-variable]
struct sta_info *psta;
^~~~
Remove also the function call that sets this variable.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/62b6c48b887decdde4b5343472089665518d205b.1617962215.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix following kernel test robot warnings:
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:
In function ‘rtw_dbg_port’:
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:2548:33:
warning: variable ‘preorder_ctrl’ set but
not used [-Wunused-but-set-variable]
struct recv_reorder_ctrl *preorder_ctrl;
^~~~~~~~~~~~~
remove also unnecessary conditional code block.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/0e950e74565b573a98b851092cc2078045d5ac3d.1617962215.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix following kernel test robot warnings:
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:2573:33:
warning: variable ‘preorder_ctrl’ set but
not used [-Wunused-but-set-variable]
struct recv_reorder_ctrl *preorder_ctrl;
^~~~~~~~~~~~~
remove also empty for cycle left unused and counter variable.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/fb1e8ea3cfeda1af27ab1a9393140e144b5cb4b5.1617962215.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix following kernel test robot warning:
drivers/staging/rtl8723bs/core/rtw_cmd.c:
In function 'rtw_cmd_thread':
>> drivers/staging/rtl8723bs/core/rtw_cmd.c:390:16:
warning: variable 'cmd_start_time' set
but not used [-Wunused-but-set-variable]
390 | unsigned long cmd_start_time;
| ^~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/509eeb1c4a7fcfc37b69cb8578ea146b95b50864.1617962215.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In rtw_cmd_thread's main loop, we wait until there's a command in the
queue. To skip this wait statement in subsequent iterations, the driver
uses a label and goto instead of the actual loop. We only get back to the
initial wait if the queue is empty when we read it.
Basically, all we want to do is check if there's a command in the queue.
If yes, we process it. If not, we wait until someone enqueues a command.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210408195601.4762-12-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need to set cmd_hdl to NULL after it's used. It will be set
again before the next command is processed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210408195601.4762-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's two identical checks if the device was stopped or unplugged.
Remove one of them.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210408195601.4762-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtl8188 driver starts a command thread that reads commands from a queue
and processes them. Each command consists of a struct cmd_obj. The command
thread may call a function to process the current command and optionally a
post-processing function. Eventually, the command's cmd_obj must be freed.
At the moment, if there's a post-processing function for the current
command, this function has to free the cmd_obj. If there's no
post-processing function, the command thread frees cmd_obj.
It's much simpler if we always leave it to the command thread to free
cmd_obj.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210408195601.4762-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the declaration of the rtw_cmd_callback array from rtw_cmd.h to
rtw_cmd.c.
The _RTW_CMD_C_ symbol is now obsolete and can be removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210408195601.4762-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declaring a static array in a header file is likely to cause name conflicts
if the declaration is pulled in multiple times.
The rtl8188 driver protects the declaration of the wlancmds array in
rtw_mlme_ext.h with ifdef _RTW_CMD_C_, which is defined only in rtw_cmd.c.
It makes more sense to declare the array in the .c file.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210408195601.4762-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct adapter parameter of rtw_os_recvbuf_resource_alloc is not used.
Remove it.
While at it, use the same parameter name in the prototype and the function
definition.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210408195601.4762-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no usb_read_port_cancel function in this driver. Remove its
prototype.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210408195601.4762-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both usb_read_port_complete and usb_write_port_complete have a regs
parameter that is not used.
When this parameter is removed, the functions can be used as urb
completion callbacks directly. There's no need for the macros that
strip the second parameter.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210408195601.4762-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
