forked from Minki/linux
a4f8f6667f
23013 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
John Stultz
|
a4f8f6667f |
timekeeping: Cap array access in timekeeping_debug
It was reported that hibernation could fail on the 2nd attempt, where the
system hangs at hibernate() -> syscore_resume() -> i8237A_resume() ->
claim_dma_lock(), because the lock has already been taken.
However there is actually no other process would like to grab this lock on
that problematic platform.
Further investigation showed that the problem is triggered by setting
/sys/power/pm_trace to 1 before the 1st hibernation.
Since once pm_trace is enabled, the rtc becomes unmeaningful after suspend,
and meanwhile some BIOSes would like to adjust the 'invalid' RTC (e.g, smaller
than 1970) to the release date of that motherboard during POST stage, thus
after resumed, it may seem that the system had a significant long sleep time
which is a completely meaningless value.
Then in timekeeping_resume -> tk_debug_account_sleep_time, if the bit31 of the
sleep time happened to be set to 1, fls() returns 32 and we add 1 to
sleep_time_bin[32], which causes an out of bounds array access and therefor
memory being overwritten.
As depicted by System.map:
0xffffffff81c9d080 b sleep_time_bin
0xffffffff81c9d100 B dma_spin_lock
the dma_spin_lock.val is set to 1, which caused this problem.
This patch adds a sanity check in tk_debug_account_sleep_time()
to ensure we don't index past the sleep_time_bin array.
[jstultz: Problem diagnosed and original patch by Chen Yu, I've solved the
issue slightly differently, but borrowed his excelent explanation of the
issue here.]
Fixes:
|
||
|
John Stultz
|
27727df240 |
timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING
When I added some extra sanity checking in timekeeping_get_ns() under
CONFIG_DEBUG_TIMEKEEPING, I missed that the NMI safe __ktime_get_fast_ns()
method was using timekeeping_get_ns().
Thus the locking added to the debug checks broke the NMI-safety of
__ktime_get_fast_ns().
This patch open-codes the timekeeping_get_ns() logic for
__ktime_get_fast_ns(), so can avoid any deadlocks in NMI.
Fixes:
|
||
Linus Torvalds
|
ac78bc714b |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar: "Two cputime fixes - hopefully the last ones" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Resync steal time when guest & host lose sync sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regression |
||
|
Linus Torvalds
|
0dcb7b6f8f |
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also start/stop filter related fixes, a perf event read() fix, a fix uncovered by fuzzing, and an uprobes leak fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Check return value of the perf_event_read() IPI perf/core: Enable mapping of the stop filters perf/core: Update filters only on executable mmap perf/core: Fix file name handling for start/stop filters perf/core: Fix event_function_local() uprobes: Fix the memcg accounting perf intel-pt: Fix occasional decoding errors when tracing system-wide tools: Sync kvm related header files for arm64 and s390 perf probe: Release resources on error when handling exit paths perf probe: Check for dup and fdopen failures perf symbols: Fix annotation of objects with debuginfo files perf script: Don't disable use_callchain if input is pipe perf script: Show proper message when failed list scripts perf jitdump: Add the right header to get the major()/minor() definitions perf ppc64le: Fix build failure when libelf is not present perf tools mem: Fix -t store option for record command perf intel-pt: Fix ip compression |
||
|
Linus Torvalds
|
395c434292 |
Power management updates for v4.8-rc3
- Fix a hibernate core regression resulting from uncovering a
latent bug in its implementation of memory bitmaps by a recent
commit (James Morse).
- Use __pa() to compute a physical address in the x86-64 code
finalizing resume from hibernation (Rafael Wysocki).
- Update power management documentation related to system sleep
states to remove outdated information from it and to add a
description of a recently introduced hibernation debug feature
to it (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=GLCW
-----END PGP SIGNATURE-----
Merge tag 'pm-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"More hibernation-related material: one fix for a recent regression in
the core, one small cleanup of the x86-64 resume code and a
documentation update.
Specifics:
- Fix a hibernate core regression resulting from uncovering a latent
bug in its implementation of memory bitmaps by a recent commit
(James Morse).
- Use __pa() to compute a physical address in the x86-64 code
finalizing resume from hibernation (Rafael Wysocki).
- Update power management documentation related to system sleep
states to remove outdated information from it and to add a
description of a recently introduced hibernation debug feature to
it (Rafael Wysocki)"
* tag 'pm-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / hibernate: Fix rtree_next_node() to avoid walking off list ends
x86/power/64: Use __pa() for physical address computation
PM / sleep: Update some system sleep documentation
|
||
Wanpeng Li
|
03cbc73263 |
sched/cputime: Resync steal time when guest & host lose sync
Commit:
|
||
Peter Zijlstra
|
173be9a14f |
sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regression
Mike reports:
Roughly 10% of the time, ltp testcase getrusage04 fails:
getrusage04 0 TINFO : Expected timers granularity is 4000 us
getrusage04 0 TINFO : Using 1 as multiply factor for max [us]time increment (1000+4000us)!
getrusage04 0 TINFO : utime: 0us; stime: 179us
getrusage04 0 TINFO : utime: 3751us; stime: 0us
getrusage04 1 TFAIL : getrusage04.c:133: stime increased > 5000us:
And tracked it down to the case where the task simply doesn't get
_any_ [us]time ticks.
Update the code to assume all rtime is utime when we lack information,
thus ensuring a task that elides the tick gets time accounted.
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Tested-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Fredrik Markstrom <fredrik.markstrom@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: stable@vger.kernel.org # 4.3+
Fixes:
|
||
David Carrillo-Cisneros
|
71e7bc2bab |
perf/core: Check return value of the perf_event_read() IPI
The call to smp_call_function_single in perf_event_read() may fail if an invalid or not online CPU index is passed. Warn user if such bug is present and return error. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1471467307-61171-2-git-send-email-davidcc@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Mathieu Poirier
|
99f5bc9bfa |
perf/core: Enable mapping of the stop filters
At this time the perf_addr_filter_needs_mmap() function will _not_ return true on a user space 'stop' filter. But stop filters need exactly the same kind of mapping that range and start filters get. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-4-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Mathieu Poirier
|
12b40a2393 |
perf/core: Update filters only on executable mmap
Function perf_event_mmap() is called by the MM subsystem each time part of a binary is loaded in memory. There can be several mapping for a binary, many times unrelated to the code section. Each time a section of a binary is mapped address filters are updated, event when the map doesn't pertain to the code section. The end result is that filters are configured based on the last map event that was received rather than the last mapping of the code segment. For example if we have an executable 'main' that calls library 'libcstest.so.1.0', and that we want to collect traces on code that is in that library. The perf cmd line for this scenario would be: perf record -e cs_etm// --filter 'filter 0x72c/0x40@/opt/lib/libcstest.so.1.0' --per-thread ./main Resulting in binaries being mapped this way: root@linaro-nano:~# cat /proc/1950/maps 00400000-00401000 r-xp 00000000 08:02 33169 /home/linaro/main 00410000-00411000 r--p 00000000 08:02 33169 /home/linaro/main 00411000-00412000 rw-p 00001000 08:02 33169 /home/linaro/main 7fa2464000-7fa2474000 rw-p 00000000 00:00 0 7fa2474000-7fa25a4000 r-xp 00000000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25a4000-7fa25b3000 ---p 00130000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b3000-7fa25b7000 r--p 0012f000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b7000-7fa25b9000 rw-p 00133000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b9000-7fa25bd000 rw-p 00000000 00:00 0 7fa25bd000-7fa25be000 r-xp 00000000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25be000-7fa25cd000 ---p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25cd000-7fa25ce000 r--p 00000000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25ce000-7fa25cf000 rw-p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25cf000-7fa25eb000 r-xp 00000000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7fa25ef000-7fa25f2000 rw-p 00000000 00:00 0 7fa25f7000-7fa25f9000 rw-p 00000000 00:00 0 7fa25f9000-7fa25fa000 r--p 00000000 00:00 0 [vvar] 7fa25fa000-7fa25fb000 r-xp 00000000 00:00 0 [vdso] 7fa25fb000-7fa25fc000 r--p 0001c000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7fa25fc000-7fa25fe000 rw-p 0001d000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7ff2ea8000-7ff2ec9000 rw-p 00000000 00:00 0 [stack] root@linaro-nano:~# Before 'main()' can execute 'libcstest.so.1.0' has to be loaded in memory. Once that has been done perf_event_mmap() has been called 4 times, with the last map starting at address 0x7fa25ce000 and the address filter configured to start filtering when the IP has passed over address 0x0x7fa25ce72c (0x7fa25ce000 + 0x72c). But that is wrong since the code segment for library 'libcstest.so.1.0' as been mapped at 0x7fa25bd000, resulting in traces not being collected. This patch corrects the situation by requesting that address filters be updated only if the mapped event is for a code segment. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-3-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Mathieu Poirier
|
4059ffd09d |
perf/core: Fix file name handling for start/stop filters
Binary file names have to be supplied for both range and start/stop filters but the current code only processes the filename if an address range filter is specified. This code adds processing of the filename for start/stop filters. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-2-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
cca2094605 |
perf/core: Fix event_function_local()
Vincent reported triggering the WARN_ON_ONCE() in event_function_local().
While thinking through cases I noticed that by using event_function()
directly, we miss the inactive case usually handled by
event_function_call().
Therefore construct a blend of event_function_call() and
event_function() that handles the cases relevant to
event_function_local().
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # 4.5+
Fixes:
|
||
Oleg Nesterov
|
6c4687cc17 |
uprobes: Fix the memcg accounting
__replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path,
it should only do this if page_check_address() fails.
This means that every enable/disable leads to unbalanced mem_cgroup_uncharge()
from put_page(old_page), it is trivial to underflow the page_counter->count
and trigger OOM.
Reported-and-tested-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: stable@vger.kernel.org # 3.17+
Fixes:
|
||
Rafael J. Wysocki
|
6c16f42a4e |
Merge branch 'pm-sleep'
* pm-sleep: PM / hibernate: Fix rtree_next_node() to avoid walking off list ends x86/power/64: Use __pa() for physical address computation PM / sleep: Update some system sleep documentation |
||
|
Linus Torvalds
|
184ca82348 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Buffers powersave frame test is reversed in cfg80211, fix from Felix
Fietkau.
2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme.
3) Fix some tg3 ethtool logic bugs, and one that would cause no
interrupts to be generated when rx-coalescing is set to 0. From
Satish Baddipadige and Siva Reddy Kallam.
4) QLCNIC mailbox corruption and napi budget handling fix from Manish
Chopra.
5) Fix fib_trie logic when walking the trie during /proc/net/route
output than can access a stale node pointer. From David Forster.
6) Several sctp_diag fixes from Phil Sutter.
7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel.
8) Checksum fixup fixes in bpf from Daniel Borkmann.
9) Memork leaks in nfnetlink, from Liping Zhang.
10) Use after free in rxrpc, from David Howells.
11) Use after free in new skb_array code of macvtap driver, from Jason
Wang.
12) Calipso resource leak, from Colin Ian King.
13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang.
14) Fix bpf non-linear packet write helpers, from Daniel Borkmann.
15) Fix lockdep splats in macsec, from Sabrina Dubroca.
16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF
handling.
17) Various tc-action bug fixes, from CONG Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net_sched: allow flushing tc police actions
net_sched: unify the init logic for act_police
net_sched: convert tcf_exts from list to pointer array
net_sched: move tc offload macros to pkt_cls.h
net_sched: fix a typo in tc_for_each_action()
net_sched: remove an unnecessary list_del()
net_sched: remove the leftover cleanup_a()
mlxsw: spectrum: Allow packets to be trapped from any PG
mlxsw: spectrum: Unmap 802.1Q FID before destroying it
mlxsw: spectrum: Add missing rollbacks in error path
mlxsw: reg: Fix missing op field fill-up
mlxsw: spectrum: Trap loop-backed packets
mlxsw: spectrum: Add missing packet traps
mlxsw: spectrum: Mark port as active before registering it
mlxsw: spectrum: Create PVID vPort before registering netdevice
mlxsw: spectrum: Remove redundant errors from the code
mlxsw: spectrum: Don't return upon error in removal path
i40e: check for and deal with non-contiguous TCs
ixgbe: Re-enable ability to toggle VLAN filtering
ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
...
|
||
James Morse
|
924d869675 |
PM / hibernate: Fix rtree_next_node() to avoid walking off list ends
rtree_next_node() walks the linked list of leaf nodes to find the next block of pages in the struct memory_bitmap. If it walks off the end of the list of nodes, it walks the list of memory zones to find the next region of memory. If it walks off the end of the list of zones, it returns false. This leaves the struct bm_position's node and zone pointers pointing at their respective struct list_heads in struct mem_zone_bm_rtree. memory_bm_find_bit() uses struct bm_position's node and zone pointers to avoid walking lists and trees if the next bit appears in the same node/zone. It handles these values being stale. Swap rtree_next_node()s 'step then test' to 'test-next then step', this means if we reach the end of memory we return false and leave the node and zone pointers as they were. This fixes a panic on resume using AMD Seattle with 64K pages: [ 6.868732] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 6.875753] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 6.896453] PM: Using 3 thread(s) for decompression. [ 6.896453] PM: Loading and decompressing image data (5339 pages)... [ 7.318890] PM: Image loading progress: 0% [ 7.323395] Unable to handle kernel paging request at virtual address 00800040 [ 7.330611] pgd = ffff000008df0000 [ 7.334003] [00800040] *pgd=00000083fffe0003, *pud=00000083fffe0003, *pmd=00000083fffd0003, *pte=0000000000000000 [ 7.344266] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 7.349825] Modules linked in: [ 7.352871] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W I 4.8.0-rc1 #4737 [ 7.360512] Hardware name: AMD Overdrive/Supercharger/Default string, BIOS ROD1002C 04/08/2016 [ 7.369109] task: ffff8003c0220000 task.stack: ffff8003c0280000 [ 7.375020] PC is at set_bit+0x18/0x30 [ 7.378758] LR is at memory_bm_set_bit+0x24/0x30 [ 7.383362] pc : [<ffff00000835bbc8>] lr : [<ffff0000080faf18>] pstate: 60000045 [ 7.390743] sp : ffff8003c0283b00 [ 7.473551] [ 7.475031] Process swapper/0 (pid: 1, stack limit = 0xffff8003c0280020) [ 7.481718] Stack: (0xffff8003c0283b00 to 0xffff8003c0284000) [ 7.800075] Call trace: [ 7.887097] [<ffff00000835bbc8>] set_bit+0x18/0x30 [ 7.891876] [<ffff0000080fb038>] duplicate_memory_bitmap.constprop.38+0x54/0x70 [ 7.899172] [<ffff0000080fcc40>] snapshot_write_next+0x22c/0x47c [ 7.905166] [<ffff0000080fe1b4>] load_image_lzo+0x754/0xa88 [ 7.910725] [<ffff0000080ff0a8>] swsusp_read+0x144/0x230 [ 7.916025] [<ffff0000080fa338>] load_image_and_restore+0x58/0x90 [ 7.922105] [<ffff0000080fa660>] software_resume+0x2f0/0x338 [ 7.927752] [<ffff000008083350>] do_one_initcall+0x38/0x11c [ 7.933314] [<ffff000008b40cc0>] kernel_init_freeable+0x14c/0x1ec [ 7.939395] [<ffff0000087ce564>] kernel_init+0x10/0xfc [ 7.944520] [<ffff000008082e90>] ret_from_fork+0x10/0x40 [ 7.949820] Code: d2800022 8b400c21 f9800031 9ac32043 (c85f7c22) [ 7.955909] ---[ end trace 0024a5986e6ff323 ]--- [ 7.960529] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Here struct mem_zone_bm_rtree's start_pfn has been returned instead of struct rtree_node's addr as the node/zone pointers are corrupt after we walked off the end of the lists during mark_unsafe_pages(). This behaviour was exposed by commit |
||
Daniel Borkmann
|
747ea55e4f |
bpf: fix bpf_skb_in_cgroup helper naming
While hashing out BPF's current_task_under_cgroup helper bits, it came
to discussion that the skb_in_cgroup helper name was suboptimally chosen.
Tejun says:
So, I think in_cgroup should mean that the object is in that
particular cgroup while under_cgroup in the subhierarchy of that
cgroup. Let's rename the other subhierarchy test to under too. I
think that'd be a lot less confusing going forward.
[...]
It's more intuitive and gives us the room to implement the real
"in" test if ever necessary in the future.
Since this touches uapi bits, we need to change this as long as v4.8
is not yet officially released. Thus, change the helper enum and rename
related bits.
Fixes:
|
||
|
Linus Torvalds
|
9710cb6624 |
Power management fixes for v4.8-rc2
- Fix the x86 identity mapping creation helpers to avoid the
assumption that the base address of the mapping will always be
aligned at the PGD level, as it may be aligned at the PUD level
if address space randomization is enabled (Rafael Wysocki).
- Fix the hibernation core to avoid executing tracing functions
before restoring the processor state completely during resume
(Thomas Garnier).
- Fix a recently introduced regression in the powernv cpufreq
driver that causes it to crash due to an out-of-bounds array
access (Akshay Adiga).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=DWxX
-----END PGP SIGNATURE-----
Merge tag 'pm-4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Two hibernation fixes allowing it to work with the recently added
randomization of the kernel identity mapping base on x86-64 and one
cpufreq driver regression fix.
Specifics:
- Fix the x86 identity mapping creation helpers to avoid the
assumption that the base address of the mapping will always be
aligned at the PGD level, as it may be aligned at the PUD level if
address space randomization is enabled (Rafael Wysocki).
- Fix the hibernation core to avoid executing tracing functions
before restoring the processor state completely during resume
(Thomas Garnier).
- Fix a recently introduced regression in the powernv cpufreq driver
that causes it to crash due to an out-of-bounds array access
(Akshay Adiga)"
* tag 'pm-4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / hibernate: Restore processor state before using per-CPU variables
x86/power/64: Always create temporary identity mapping correctly
cpufreq: powernv: Fix crash in gpstate_timer_handler()
|
||
|
Linus Torvalds
|
3bc6d8c155 |
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar: "Misc fixes: a /dev/rtc regression fix, two APIC timer period calibration fixes, an ARM clocksource driver fix and a NOHZ power use regression fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hpet: Fix /dev/rtc breakage caused by RTC cleanup x86/timers/apic: Inform TSC deadline clockevent device about recalibration x86/timers/apic: Fix imprecise timer interrupts by eliminating TSC clockevents frequency roundoff error timers: Fix get_next_timer_interrupt() computation clocksource/arm_arch_timer: Force per-CPU interrupt to be level-triggered |
||
|
Rafael J. Wysocki
|
0aeeb3e73f |
Merge branches 'pm-sleep' and 'pm-cpufreq'
* pm-sleep: PM / hibernate: Restore processor state before using per-CPU variables x86/power/64: Always create temporary identity mapping correctly * pm-cpufreq: cpufreq: powernv: Fix crash in gpstate_timer_handler() |
||
|
Linus Torvalds
|
e6e7214fbb |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar: "Misc fixes: cputime fixes, two deadline scheduler fixes and a cgroups scheduling fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Fix omitted ticks passed in parameter sched/cputime: Fix steal time accounting sched/deadline: Fix lock pinning warning during CPU hotplug sched/cputime: Mitigate performance regression in times()/clock_gettime() sched/fair: Fix typo in sync_throttle() sched/deadline: Fix wrap-around in DL heap |
||
Thomas Garnier
|
62822e2ec4 |
PM / hibernate: Restore processor state before using per-CPU variables
Restore the processor state before calling any other functions to
ensure per-CPU variables can be used with KASLR memory randomization.
Tracing functions use per-CPU variables (GS based on x86) and one was
called just before restoring the processor state fully. It resulted
in a double fault when both the tracing & the exception handler
functions tried to use a per-CPU variable.
Fixes:
|
||
|
Linus Torvalds
|
ad83242a8f |
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, plus two uncore-PMU fixes, an uprobes fix, a perf-cgroups fix and an AUX events fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add enable_box for client MSR uncore perf/x86/intel/uncore: Fix uncore num_counters uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions perf/core: Set cgroup in CPU contexts for new cgroup events perf/core: Fix sideband list-iteration vs. event ordering NULL pointer deference crash perf probe ppc64le: Fix probe location when using DWARF perf probe: Add function to post process kernel trace events tools: Sync cpufeatures headers with the kernel toops: Sync tools/include/uapi/linux/bpf.h with the kernel tools: Sync cpufeatures.h and vmx.h with the kernel perf probe: Support signedness casting perf stat: Avoid skew when reading events perf probe: Fix module name matching perf probe: Adjust map->reloc offset when finding kernel symbol from map perf hists: Trim libtraceevent trace_seq buffers perf script: Add 'bpf-output' field to usage message |
||
|
Linus Torvalds
|
1f8083c640 |
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar: "Misc fixes: lockstat fix, futex fix on !MMU systems, big endian fix for qrwlocks and a race fix for pvqspinlocks" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/pvqspinlock: Fix a bug in qstat_read() locking/pvqspinlock: Fix double hash race locking/qrwlock: Fix write unlock bug on big endian systems futex: Assume all mappings are private on !MMU systems |
||
|
Linus Torvalds
|
25db69188e |
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar: "A fix for an MSI regression" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi: Make sure PCI MSIs are activated early |
||
Frederic Weisbecker
|
26f2c75cd2 |
sched/cputime: Fix omitted ticks passed in parameter
Commit:
|
||
|
Wanpeng Li
|
f9bcf1e0e0 |
sched/cputime: Fix steal time accounting
Commit:
|
||
Ingo Molnar
|
fdbdfefbab |
Merge branch 'linus' into timers/urgent, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Pan Xinhui
|
c2ace36b88 |
locking/pvqspinlock: Fix a bug in qstat_read()
It's obviously wrong to set stat to NULL. So lets remove it. Otherwise it is always zero when we check the latency of kick/wake. Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Waiman Long <Waiman.Long@hpe.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1468405414-3700-1-git-send-email-xinhui.pan@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Wanpeng Li
|
229ce63157 |
locking/pvqspinlock: Fix double hash race
When the lock holder vCPU is racing with the queue head:
CPU 0 (lock holder) CPU1 (queue head)
=================== =================
spin_lock(); spin_lock();
pv_kick_node(): pv_wait_head_or_lock():
if (!lp) {
lp = pv_hash(lock, pn);
xchg(&l->locked, _Q_SLOW_VAL);
}
WRITE_ONCE(pn->state, vcpu_halted);
cmpxchg(&pn->state,
vcpu_halted, vcpu_hashed);
WRITE_ONCE(l->locked, _Q_SLOW_VAL);
(void)pv_hash(lock, pn);
In this case, lock holder inserts the pv_node of queue head into the
hash table and set _Q_SLOW_VAL unnecessary. This patch avoids it by
restoring/setting vcpu_hashed state after failing adaptive locking
spinning.
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hpe.com>
Link: http://lkml.kernel.org/r/1468484156-4521-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Ingo Molnar
|
a2071cd765 |
Merge branch 'linus' into locking/urgent, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Wanpeng Li
|
c0c8c9fa21 |
sched/deadline: Fix lock pinning warning during CPU hotplug
The following warning can be triggered by hot-unplugging the CPU on which an active SCHED_DEADLINE task is running on: WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:3531 lock_release+0x690/0x6a0 releasing a pinned lock Call Trace: dump_stack+0x99/0xd0 __warn+0xd1/0xf0 ? dl_task_timer+0x1a1/0x2b0 warn_slowpath_fmt+0x4f/0x60 ? sched_clock+0x13/0x20 lock_release+0x690/0x6a0 ? enqueue_pushable_dl_task+0x9b/0xa0 ? enqueue_task_dl+0x1ca/0x480 _raw_spin_unlock+0x1f/0x40 dl_task_timer+0x1a1/0x2b0 ? push_dl_task.part.31+0x190/0x190 WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:3649 lock_unpin_lock+0x181/0x1a0 unpinning an unpinned lock Call Trace: dump_stack+0x99/0xd0 __warn+0xd1/0xf0 warn_slowpath_fmt+0x4f/0x60 lock_unpin_lock+0x181/0x1a0 dl_task_timer+0x127/0x2b0 ? push_dl_task.part.31+0x190/0x190 As per the comment before this code, its safe to drop the RQ lock here, and since we (potentially) change rq, unpin and repin to avoid the splat. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> [ Rewrote changelog. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luca Abeni <luca.abeni@unitn.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1470274940-17976-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Giovanni Gherdovich
|
6075620b05 |
sched/cputime: Mitigate performance regression in times()/clock_gettime()
Commit: |
||
Xunlei Pang
|
b8922125e4 |
sched/fair: Fix typo in sync_throttle()
We should update cfs_rq->throttled_clock_task, not
pcfs_rq->throttle_clock_task.
The effects of this bug was probably occasionally erratic
group scheduling, particularly in cgroups-intense workloads.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
[ Added changelog. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
|
||
Tommaso Cucinotta
|
a23eadfae2 |
sched/deadline: Fix wrap-around in DL heap
Current code in cpudeadline.c has a bug in re-heapifying when adding a new element at the end of the heap, because a deadline value of 0 is temporarily set in the new elem, then cpudl_change_key() is called with the actual elem deadline as param. However, the function compares the new deadline to set with the one previously in the elem, which is 0. So, if current absolute deadlines grew so much to have negative values as s64, the comparison in cpudl_change_key() makes the wrong decision. Instead, as from dl_time_before(), the kernel should handle correctly abs deadlines wrap-arounds. This patch fixes the problem with a minimally invasive change that forces cpudl_change_key() to heapify up in this case. Signed-off-by: Tommaso Cucinotta <tommaso.cucinotta@sssup.it> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Luca Abeni <luca.abeni@unitn.it> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Juri Lelli <juri.lelli@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1468921493-10054-2-git-send-email-tommaso.cucinotta@sssup.it Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
David Carrillo-Cisneros
|
db4a835601 |
perf/core: Set cgroup in CPU contexts for new cgroup events
There's a perf stat bug easy to observer on a machine with only one cgroup:
$ perf stat -e cycles -I 1000 -C 0 -G /
# time counts unit events
1.000161699 <not counted> cycles /
2.000355591 <not counted> cycles /
3.000565154 <not counted> cycles /
4.000951350 <not counted> cycles /
We'd expect some output there.
The underlying problem is that there is an optimization in
perf_cgroup_sched_{in,out}() that skips the switch of cgroup events
if the old and new cgroups in a task switch are the same.
This optimization interacts with the current code in two ways
that cause a CPU context's cgroup (cpuctx->cgrp) to be NULL even if a
cgroup event matches the current task. These are:
1. On creation of the first cgroup event in a CPU: In current code,
cpuctx->cpu is only set in perf_cgroup_sched_in, but due to the
aforesaid optimization, perf_cgroup_sched_in will run until the next
cgroup switches in that CPU. This may happen late or never happen,
depending on system's number of cgroups, CPU load, etc.
2. On deletion of the last cgroup event in a cpuctx: In list_del_event,
cpuctx->cgrp is set NULL. Any new cgroup event will not be sched in
because cpuctx->cgrp == NULL until a cgroup switch occurs and
perf_cgroup_sched_in is executed (updating cpuctx->cgrp).
This patch fixes both problems by setting cpuctx->cgrp in list_add_event,
mirroring what list_del_event does when removing a cgroup event from CPU
context, as introduced in:
commit
|
||
|
Peter Zijlstra
|
0b8f1e2e26 |
perf/core: Fix sideband list-iteration vs. event ordering NULL pointer deference crash
Vegard Nossum reported that perf fuzzing generates a NULL
pointer dereference crash:
> Digging a bit deeper into this, it seems the event itself is getting
> created by perf_event_open() and it gets added to the pmu_event_list
> through:
>
> perf_event_open()
> - perf_event_alloc()
> - account_event()
> - account_pmu_sb_event()
> - attach_sb_event()
>
> so at this point the event is being attached but its ->ctx is still
> NULL. It seems like ->ctx is set just a bit later in
> perf_event_open(), though.
>
> But before that, __schedule() comes along and creates a stack trace
> similar to the one above:
>
> __schedule()
> - __perf_event_task_sched_out()
> - perf_iterate_sb()
> - perf_iterate_sb_cpu()
> - event_filter_match()
> - perf_cgroup_match()
> - __get_cpu_context()
> - (dereference ctx which is NULL)
>
> So I guess the question is... should the event be attached (= put on
> the list) before ->ctx gets set? Or should the cgroup code check for a
> NULL ->ctx?
The latter seems like the simplest solution. Moving the list-add later
creates a bit of a mess.
Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
|
||
|
Linus Torvalds
|
a0cba2179e |
Revert "printk: create pr_<level> functions"
This reverts commit
|
||
Chris Metcalf
|
46c8f0b077 |
timers: Fix get_next_timer_interrupt() computation
The tick_nohz_stop_sched_tick() routine is not properly canceling the sched timer when nothing is pending, because get_next_timer_interrupt() is no longer returning KTIME_MAX in that case. This causes periodic interrupts when none are needed. When determining the next interrupt time, we first use __next_timer_interrupt() to get the first expiring timer in the timer wheel. If no timer is found, we return the base clock value plus NEXT_TIMER_MAX_DELTA to indicate there is no timer in the timer wheel. Back in get_next_timer_interrupt(), we set the "expires" value by converting the timer wheel expiry (in ticks) to a nsec value. But we don't want to do this if the timer wheel expiry value indicates no timer; we want to return KTIME_MAX. Prior to commit |
||
Marc Zyngier
|
f3b0946d62 |
genirq/msi: Make sure PCI MSIs are activated early
Bharat Kumar Gogada reported issues with the generic MSI code, where the
end-point ended up with garbage in its MSI configuration (both for the vector
and the message).
It turns out that the two MSI paths in the kernel are doing slightly different
things:
generic MSI: disable MSI -> allocate MSI -> enable MSI -> setup EP
PCI MSI: disable MSI -> allocate MSI -> setup EP -> enable MSI
And it turns out that end-points are allowed to latch the content of the MSI
configuration registers as soon as MSIs are enabled. In Bharat's case, the
end-point ends up using whatever was there already, which is not what you
want.
In order to make things converge, we introduce a new MSI domain flag
(MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for PCI/MSI. When set,
this flag forces the programming of the end-point as soon as the MSIs are
allocated.
A consequence of this is that we have an extra activate in irq_startup, but
that should be without much consequence.
tglx:
- Several people reported a VMWare regression with PCI/MSI-X passthrough. It
turns out that the patch also cures that issue.
- We need to have a look at the MSI disable interrupt path, where we write
the msg to all zeros without disabling MSI in the PCI device. Is that
correct?
Fixes:
|
||
Andreas Ziegler
|
574673c231 |
printk: Remove unnecessary #ifdef CONFIG_PRINTK
In commit
|
||
Jens Axboe
|
1eff9d322a |
block: rename bio bi_rw to bi_opf
Since commit
|
||
Alexei Starovoitov
|
a6ed3ea65d |
bpf: restore behavior of bpf_map_update_elem
The introduction of pre-allocated hash elements inadvertently broke
the behavior of bpf hash maps where users expected to call
bpf_map_update_elem() without considering that the map can be full.
Some programs do:
old_value = bpf_map_lookup_elem(map, key);
if (old_value) {
... prepare new_value on stack ...
bpf_map_update_elem(map, key, new_value);
}
Before pre-alloc the update() for existing element would work even
in 'map full' condition. Restore this behavior.
The above program could have updated old_value in place instead of
update() which would be faster and most programs use that approach,
but sometimes the values are large and the programs use update()
helper to do atomic replacement of the element.
Note we cannot simply update element's value in-place like percpu
hash map does and have to allocate extra num_possible_cpu elements
and use this extra reserve when the map is full.
Fixes:
|
||
|
Linus Torvalds
|
db8262787e |
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar: "Mostly tooling fixes and some late tooling updates, plus two perf related printk message fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tests bpf: Use SyS_epoll_wait alias perf tests: objdump output can contain multi byte chunks perf record: Add --sample-cpu option perf hists: Introduce output_resort_cb method perf tools: Move config/Makefile into Makefile.config perf tests: Add test for bitmap_scnprintf function tools lib: Add bitmap_and function tools lib: Add bitmap_scnprintf function tools lib: Add bitmap_alloc function tools lib traceevent: Ignore generated library files perf tools: Fix build failure on perl script context perf/core: Change log level for duration warning to KERN_INFO perf annotate: Plug filename string leak perf annotate: Introduce strerror for handling symbol__disassemble() errors perf annotate: Rename symbol__annotate() to symbol__disassemble() perf/x86: Modify error message in virtualized environment perf target: str_error_r() always returns the buffer it receives perf annotate: Use pipe + fork instead of popen perf evsel: Introduce constructor for cycles event |
||
|
Linus Torvalds
|
2cfd716d27 |
powerpc updates for 4.8 #2
Fixes: - Fix early access to cpu_spec relocation from Benjamin Herrenschmidt - Fix incorrect event codes in power9-event-list from Madhavan Srinivasan - Move register_process_table() out of ppc_md from Michael Ellerman Use jump_label for [cpu|mmu]_has_feature() from Aneesh Kumar K.V, Kevin Hao and Michael Ellerman: - Add mmu_early_init_devtree() from Michael Ellerman - Move disable_radix handling into mmu_early_init_devtree() from Michael Ellerman - Do hash device tree scanning earlier from Michael Ellerman - Do radix device tree scanning earlier from Michael Ellerman - Do feature patching before MMU init from Michael Ellerman - Check features don't change after patching from Michael Ellerman - Make MMU_FTR_RADIX a MMU family feature from Aneesh Kumar K.V - Convert mmu_has_feature() to returning bool from Michael Ellerman - Convert cpu_has_feature() to returning bool from Michael Ellerman - Define radix_enabled() in one place & use static inline from Michael Ellerman - Add early_[cpu|mmu]_has_feature() from Michael Ellerman - Convert early cpu/mmu feature check to use the new helpers from Aneesh Kumar K.V - jump_label: Make it possible for arches to invoke jump_label_init() earlier from Kevin Hao - Call jump_label_init() in apply_feature_fixups() from Aneesh Kumar K.V - Remove mfvtb() from Kevin Hao - Move cpu_has_feature() to a separate file from Kevin Hao - Add kconfig option to use jump labels for cpu/mmu_has_feature() from Michael Ellerman - Add option to use jump label for cpu_has_feature() from Kevin Hao - Add option to use jump label for mmu_has_feature() from Kevin Hao - Catch usage of cpu/mmu_has_feature() before jump label init from Aneesh Kumar K.V - Annotate jump label assembly from Michael Ellerman TLB flush enhancements from Aneesh Kumar K.V: - radix: Implement tlb mmu gather flush efficiently - Add helper for finding SLBE LLP encoding - Use hugetlb flush functions - Drop multiple definition of mm_is_core_local - radix: Add tlb flush of THP ptes - radix: Rename function and drop unused arg - radix/hugetlb: Add helper for finding page size - hugetlb: Add flush_hugetlb_tlb_range - remove flush_tlb_page_nohash Add new ptrace regsets from Anshuman Khandual and Simon Guo: - elf: Add powerpc specific core note sections - Add the function flush_tmregs_to_thread - Enable in transaction NT_PRFPREG ptrace requests - Enable in transaction NT_PPC_VMX ptrace requests - Enable in transaction NT_PPC_VSX ptrace requests - Adapt gpr32_get, gpr32_set functions for transaction - Enable support for NT_PPC_CGPR - Enable support for NT_PPC_CFPR - Enable support for NT_PPC_CVMX - Enable support for NT_PPC_CVSX - Enable support for TM SPR state - Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR - Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR - Enable support for EBB registers - Enable support for Performance Monitor registers -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXpGaLAAoJEFHr6jzI4aWA9aYP/1AqmRPJ9D0XVUJWT+FVABUK LESESoVFF4Hug1j1F8Synhg5o4SzD2t45iGKbclYaFthOIyovMg7Wr1KSu4hQ0go rPuQfpXDNQ8jKdDX8hbPXKUxrNRBNfqJGFo5E7mO6wN9AJ9d1LVwQ+jKAva29Tqs LaAlMbQNbeObPNzOl73B73iew3aozr+mXjBqv82lqvgYknBD2CLf24xGG3eNIbq5 ZZk4LPC8pdkaxnajnzRFzqwiyPWzao0yfpVRKh52TKHBQF/prR/KACb6zUuja/61 krOfegUKob14OYrehjs6X8XNRLnILRI0u1H5bmj7eVEiY/usyNzE93SMHZM3Wdau sQF/Au4OLNXj0ZQdNBtzRsZRyp1d560Gsj+lQGBoPd4hfIWkFYHvxzxsUSdqv4uA MWDMwN0Vvfk0cpprsabsWNevkaotYYBU00px5hF/e5ZUc9/x/xYUVMgPEDr0QZLr cHJo9/Pjk4u/0g4lj+2y1LLl/0tNEZZg69O6bvffPAPVSS4/P4y/bKKYd4I0zL99 Ykp91mSmkl70F3edgOSFqyda2gN2l2Ekb/i081YGXheFy1rbD29Vxv82BOVog4KY ibvOqp38WDzCVk5OXuCRvBl0VudLKGJYdppU1nXg4KgrTZXHeCAC0E+NzUsgOF4k OMvQ+5drVxrno+Hw8FVJ =0Q8E -----END PGP SIGNATURE----- Merge tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "These were delayed for various reasons, so I let them sit in next a bit longer, rather than including them in my first pull request. Fixes: - Fix early access to cpu_spec relocation from Benjamin Herrenschmidt - Fix incorrect event codes in power9-event-list from Madhavan Srinivasan - Move register_process_table() out of ppc_md from Michael Ellerman Use jump_label use for [cpu|mmu]_has_feature(): - Add mmu_early_init_devtree() from Michael Ellerman - Move disable_radix handling into mmu_early_init_devtree() from Michael Ellerman - Do hash device tree scanning earlier from Michael Ellerman - Do radix device tree scanning earlier from Michael Ellerman - Do feature patching before MMU init from Michael Ellerman - Check features don't change after patching from Michael Ellerman - Make MMU_FTR_RADIX a MMU family feature from Aneesh Kumar K.V - Convert mmu_has_feature() to returning bool from Michael Ellerman - Convert cpu_has_feature() to returning bool from Michael Ellerman - Define radix_enabled() in one place & use static inline from Michael Ellerman - Add early_[cpu|mmu]_has_feature() from Michael Ellerman - Convert early cpu/mmu feature check to use the new helpers from Aneesh Kumar K.V - jump_label: Make it possible for arches to invoke jump_label_init() earlier from Kevin Hao - Call jump_label_init() in apply_feature_fixups() from Aneesh Kumar K.V - Remove mfvtb() from Kevin Hao - Move cpu_has_feature() to a separate file from Kevin Hao - Add kconfig option to use jump labels for cpu/mmu_has_feature() from Michael Ellerman - Add option to use jump label for cpu_has_feature() from Kevin Hao - Add option to use jump label for mmu_has_feature() from Kevin Hao - Catch usage of cpu/mmu_has_feature() before jump label init from Aneesh Kumar K.V - Annotate jump label assembly from Michael Ellerman TLB flush enhancements from Aneesh Kumar K.V: - radix: Implement tlb mmu gather flush efficiently - Add helper for finding SLBE LLP encoding - Use hugetlb flush functions - Drop multiple definition of mm_is_core_local - radix: Add tlb flush of THP ptes - radix: Rename function and drop unused arg - radix/hugetlb: Add helper for finding page size - hugetlb: Add flush_hugetlb_tlb_range - remove flush_tlb_page_nohash Add new ptrace regsets from Anshuman Khandual and Simon Guo: - elf: Add powerpc specific core note sections - Add the function flush_tmregs_to_thread - Enable in transaction NT_PRFPREG ptrace requests - Enable in transaction NT_PPC_VMX ptrace requests - Enable in transaction NT_PPC_VSX ptrace requests - Adapt gpr32_get, gpr32_set functions for transaction - Enable support for NT_PPC_CGPR - Enable support for NT_PPC_CFPR - Enable support for NT_PPC_CVMX - Enable support for NT_PPC_CVSX - Enable support for TM SPR state - Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR - Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR - Enable support for EBB registers - Enable support for Performance Monitor registers" * tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits) powerpc/mm: Move register_process_table() out of ppc_md powerpc/perf: Fix incorrect event codes in power9-event-list powerpc/32: Fix early access to cpu_spec relocation powerpc/ptrace: Enable support for Performance Monitor registers powerpc/ptrace: Enable support for EBB registers powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR powerpc/ptrace: Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR powerpc/ptrace: Enable support for TM SPR state powerpc/ptrace: Enable support for NT_PPC_CVSX powerpc/ptrace: Enable support for NT_PPC_CVMX powerpc/ptrace: Enable support for NT_PPC_CFPR powerpc/ptrace: Enable support for NT_PPC_CGPR powerpc/ptrace: Adapt gpr32_get, gpr32_set functions for transaction powerpc/ptrace: Enable in transaction NT_PPC_VSX ptrace requests powerpc/ptrace: Enable in transaction NT_PPC_VMX ptrace requests powerpc/ptrace: Enable in transaction NT_PRFPREG ptrace requests powerpc/process: Add the function flush_tmregs_to_thread elf: Add powerpc specific core note sections powerpc/mm: remove flush_tlb_page_nohash powerpc/mm/hugetlb: Add flush_hugetlb_tlb_range ... |
||
|
Linus Torvalds
|
fb1b83d3ff |
Removed the MODULE_SIG_FORCE-means-no-MODULE_FORCE_LOAD patch.
Only interesting thing here is Jessica's patch to add ro_after_init support to modules. The rest are all trivia. Cheers, Rusty. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXopD9AAoJENkgDmzRrbjxDVEP+waK+E3Y+vJHibLwwCYcVqLG OAkQoFXGqxYAo0faGtGPZczxDH/GVK754y+qugOeQvCgHJqit7qWmIUs5uRgqUMb uKjoUOfCBiVGUsaHfw7RisOP5FXvAk1jkFxBVtywPj6eIonLr9BB4VE813iXnYGG RkVFvAmFxMgq2BY+yjp4IDCGNVEFBq9UrXZ8XY+WGhI1pbxVp9SCUVrLckARDSS4 t5NeVeLCFlNKmw+ElU7zCKaa4Cyloq9lGFBA1ZgchGADRsOrha9VHNRVxR0pHSIG 100SW+nFhncNWqVQ2YgspVe1so993wGnORPpsb+o3dg7mIn2wkj6WhTfAKv/UQ1W 7JUFaRi/rMC8h/njLKvbX+gmEU1d4nnTyZ76UFh+VxU6mbVWYqI44DCLpt+mPT13 JwwqGGCDPnB/28KFmQITYAkdmvAV3u2aZLXJAQPxKVF7/IzklxHHz2ifMEwtPzOh UvuWhjmmPAqncKWXzflxMj8i4C3sPyAs0RDSrMXG7jZJlhguVea+b8bXNhEafR+n GM0btAfGw+VWluyNMlOpigSpJt/n6/hQtzlgBQGn7CeknNwamBe5MLGSN3N9MgL9 WXma9sKn34IqjxtSSP5rJlwTRWHELUZIsKmOnWP4/3gwf1+Fe65ML2cCwp6saeMX ZjEosYxdKo32LiZhRDPR =URwe -----END PGP SIGNATURE----- Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "The only interesting thing here is Jessica's patch to add ro_after_init support to modules. The rest are all trivia" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: extable.h: add stddef.h so "NULL" definition is not implicit modules: add ro_after_init support jump_label: disable preemption around __module_text_address(). exceptions: fork exception table content from module.h into extable.h modules: Add kernel parameter to blacklist modules module: Do a WARN_ON_ONCE() for assert module mutex not held Documentation/module-signing.txt: Note need for version info if reusing a key module: Invalidate signatures on force-loaded modules module: Issue warnings when tainting kernel module: fix redundant test. module: fix noreturn attribute for __module_put_and_exit() |
||
Jason Baron
|
1f69bf9c61 |
jump_label: remove bug.h, atomic.h dependencies for HAVE_JUMP_LABEL
The current jump_label.h includes bug.h for things such as WARN_ON(). This makes the header problematic for inclusion by kernel.h or any headers that kernel.h includes, since bug.h includes kernel.h (circular dependency). The inclusion of atomic.h is similarly problematic. Thus, this should make jump_label.h 'includable' from most places. Link: http://lkml.kernel.org/r/7060ce35ddd0d20b33bf170685e6b0fab816bdf2.1467837322.git.jbaron@akamai.com Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Masahiro Yamada
|
97f2645f35 |
tree-wide: replace config_enabled() with IS_ENABLED()
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jessica Yu
|
444d13ff10 |
modules: add ro_after_init support
Add ro_after_init support for modules by adding a new page-aligned section in the module layout (after rodata) for ro_after_init data and enabling RO protection for that section after module init runs. Signed-off-by: Jessica Yu <jeyu@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> |
||
Rusty Russell
|
bdc9f37355 |
jump_label: disable preemption around __module_text_address().
Steven reported a warning caused by not holding module_mutex or rcu_read_lock_sched: his backtrace was corrupted but a quick audit found this possible cause. It's wrong anyway... Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> |