The size / offset information of all firmware ingredients are
now caculated from header. Driver will validate the header and
rsa key size. If any component is out of boundary, driver will
reject the loading too.
v6: Clean up warnings from make docs
v5: Tidy up GuC titles in kernel/Doc
v4: Now using 'size_dw' for those defined in css_header
v3: 1) Move DOC to intel_guc_fwif.h right before css_header
definition. Add more comments.
2) Change 'size' to 'len' or 'length' to avoid confusion.
3) Add UOS_RSA_SCRATCH_MAX_COUNT according to BSpec. And
driver validate size of RSA key now.
4) Add fw component size/offset info to intel_guc_fw.
v2: Add indent into DOC to make fixed-width format rather than
change the tmpl.
v1: 1) guc_css_header is defined as __packed now
2) Add and correct GuC related topics in kernel/Doc
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add host2guc interface to notify GuC power state changes when
enter or resume from power saving state.
v3: Move intel_guc_suspend to i915_drm_suspend for consistency.
v2: Add GuC suspend/resume to runtime suspend/resume too
v1: Change to a more flexible way when fill host to GuC scratch
data in order to remove hard coding.
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GuC-based submission is mostly the same as execlist mode, up to
intel_logical_ring_advance_and_submit(), where the context being
dispatched would be added to the execlist queue; at this point
we submit the context to the GuC backend instead.
There are, however, a few other changes also required, notably:
1. Contexts must be pinned at GGTT addresses accessible by the GuC
i.e. NOT in the range [0..WOPCM_SIZE), so we have to add the
PIN_OFFSET_BIAS flag to the relevant GGTT-pinning calls.
2. The GuC's TLB must be invalidated after a context is pinned at
a new GGTT address.
3. GuC firmware uses the one page before Ring Context as shared data.
Therefore, whenever driver wants to get base address of LRC, we
will offset one page for it. LRC_PPHWSP_PN is defined as the page
number of LRCA.
4. In the work queue used to pass requests to the GuC, the GuC
firmware requires the ring-tail-offset to be represented as an
11-bit value, expressed in QWords. Therefore, the ringbuffer
size must be reduced to the representable range (4 pages).
v2:
Defer adding #defines until needed [Chris Wilson]
Rationalise type declarations [Chris Wilson]
v4:
Squashed kerneldoc patch into here [Daniel Vetter]
v5:
Update request->tail in code common to both GuC and execlist modes.
Add a private version of lr_context_update(), as sharing the
execlist version leads to race conditions when the CPU and
the GuC both update TAIL in the context image.
Conversion of error-captured HWS page to string must account
for offset from start of object to actual HWS (LRC_PPHWSP_PN).
Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A GuC client has its own doorbell and workqueue. It maintains the
doorbell cache line, process description object and work queue item.
A default guc_client is created for the i915 driver to use for
normal-priority in-order submission.
Note that the created client is not yet ready for use; doorbell
allocation will fail as we haven't yet linked the GuC's context
descriptor to the default contexts for each ring (see later patch).
v2:
Defer adding structure members until needed [Chris Wilson]
Rationalise type declarations [Chris Wilson]
v5:
Add GuC per-engine submission & seqno statistics.
Move wq locking to encompass both get_space() and add_item().
Take forcewake lock in host2guc_action() [Tom O'Rourke]
v6:
Fix GuC doorbell cacheline selection code (the
cacheline-within-page calculation was wrong).
Rename GuC priorities to make them closer to the names used in
the GuC firmware source, matching what the autogenerated
versions will (probably) be.
Add per-ring statistics to client.
Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Allocate a GEM object to hold GuC log data. A debugfs interface
(i915_guc_log_dump) is provided to print out the log content.
v2:
Add struct members at point of use [Chris Wilson]
v6:
Rebased
Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This adds the first of the data structures used to communicate with the
GuC (the pool of guc_context structures).
We create a GuC-specific wrapper round the GEM object allocator as all
GEM objects shared with the GuC must be pinned into GGTT space at an
address that is NOT in the range [0..WOPCM_TOP), as that range of GGTT
addresses is not accessible to the GuC (from the GuC's point of view,
it's permanently reserved for other objects such as the BootROM & SRAM).
Later, we will need to allocate additional GuC-sharable objects for the
submission client(s) and the GuC's debug log.
v2:
Remove redundant initialisation [Chris Wilson]
Defer adding struct members until needed [Chris Wilson]
Local functions should pass dev_priv rather than dev [Chris Wilson]
v5:
Invalidate GuC TLB after allocating and pinning a new object
v6:
Rebased
Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This fetches the required firmware image from the filesystem,
then loads it into the GuC's memory via a dedicated DMA engine.
This patch is derived from GuC loading work originally done by
Vinit Azad and Ben Widawsky.
v2:
Various improvements per review comments by Chris Wilson
v3:
Removed 'wait' parameter to intel_guc_ucode_load() as firmware
prefetch is no longer supported in the common firmware loader,
per Daniel Vetter's request.
Firmware checker callback fn now returns errno rather than bool.
v4:
Squash uC-independent code into GuC-specifc loader [Daniel Vetter]
Don't keep the driver working (by falling back to execlist mode)
if GuC firmware loading fails [Daniel Vetter]
v5:
Clarify WOPCM-related #defines [Tom O'Rourke]
Delete obsolete code no longer required with current h/w & f/w
[Tom O'Rourke]
Move the call to intel_guc_ucode_init() later, so that it can
allocate GEM objects, and have it fetch the firmware; then
intel_guc_ucode_load() doesn't need to fetch it later.
[Daniel Vetter].
v6:
Update comment describing intel_guc_ucode_load() [Tom O'Rourke]
Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
