Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 14577/77836 datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and charger driver, so using
level sensitive interrupt is here especially important to avoid races.
With an edge configuration in case if first PMIC signals interrupt
followed shortly after by the RTC, the interrupt might not be yet
cleared/acked thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-4-krzysztof.kozlowski@canonical.com
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 77693 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races. With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-3-krzysztof.kozlowski@canonical.com
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 77686 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races. With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-2-krzysztof.kozlowski@canonical.com
The LogiCVC multi-function device has a display part which is now
described in its binding. Add a patternProperties match for it.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
CRU has a shared register that is used e.g. to control USB 2.0 PHY block
access. It's a single 32 b register. Document it as syscon so it can be
used with a regmap.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Broadcom's MISC is an MFD hardware block used on some of their SoCs like
bcm63xx and bcm4908. At this point only PCIe reset is fully understood
and documented. More functions may be added later.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Pull power supply and reset updates from Sebastian Reichel:
"Miscellaneous small fixes and improvements all over the place.
Nothing stands out in particular"
* tag 'for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: bq25890: Fix initial setting of the F_CONV_RATE field
power: supply: bq25890: Fix race causing oops at boot
power: supply: bq27xxx: Fix kernel crash on IRQ handler register error
power: bq25890: add return values to error messages
power: supply: axp288-charger: Simplify axp288_get_charger_health()
power: supply: axp288-charger: Remove unnecessary is_present and is_online helpers
power: supply: axp288-charger: Add depends on IOSF_MBIO to Kconfig
power: supply: ab8500_bmdata: Use standard phandle
dt-bindings: power: supply: ab8500: Standard monitored-battery
power: supply: axp288_charger: Fix missing mutex_init()
power: supply: max17042_battery: Prevent int underflow in set_soc_threshold
power: supply: max17042_battery: Clear status bits in interrupt handler
MAINTAINERS: power: supply: max17040: add entry with reviewers
MAINTAINERS: power: supply: max17042: add entry with reviewers
power: supply: max17040: fix null-ptr-deref in max17040_probe()
power: supply: rt5033_battery: Change voltage values to µV
power: supply: axp288-charger: Optimize register reading method
dt-bindings: power: Bindings for Samsung batteries
power: supply: cpcap-battery: use device_get_match_data() to simplify code
power: supply: max17042_battery: fix typo in MAX17042_IAvg_empty
...
Pull iommu updates from Joerg Roedel:
- Intel IOMMU Updates fro Lu Baolu:
- Dump DMAR translation structure when DMA fault occurs
- An optimization in the page table manipulation code
- Use second level for GPA->HPA translation
- Various cleanups
- Arm SMMU Updates from Will
- Minor optimisations to SMMUv3 command creation and submission
- Numerous new compatible string for Qualcomm SMMUv2 implementations
- Fixes for the SWIOTLB based implemenation of dma-iommu code for
untrusted devices
- Add support for r8a779a0 to the Renesas IOMMU driver and DT matching
code for r8a77980
- A couple of cleanups and fixes for the Apple DART IOMMU driver
- Make use of generic report_iommu_fault() interface in the AMD IOMMU
driver
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (35 commits)
iommu/dma: Fix incorrect error return on iommu deferred attach
iommu/dart: Initialize DART_STREAMS_ENABLE
iommu/dma: Use kvcalloc() instead of kvzalloc()
iommu/tegra-smmu: Use devm_bitmap_zalloc when applicable
iommu/dart: Use kmemdup instead of kzalloc and memcpy
iommu/vt-d: Avoid duplicate removing in __domain_mapping()
iommu/vt-d: Convert the return type of first_pte_in_page to bool
iommu/vt-d: Clean up unused PASID updating functions
iommu/vt-d: Delete dev_has_feat callback
iommu/vt-d: Use second level for GPA->HPA translation
iommu/vt-d: Check FL and SL capability sanity in scalable mode
iommu/vt-d: Remove duplicate identity domain flag
iommu/vt-d: Dump DMAR translation structure when DMA fault occurs
iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option
iommu/arm-smmu-qcom: Request direct mapping for modem device
iommu: arm-smmu-qcom: Add compatible for QCM2290
dt-bindings: arm-smmu: Add compatible for QCM2290 SoC
iommu/arm-smmu-qcom: Add SM6350 SMMU compatible
dt-bindings: arm-smmu: Add compatible for SM6350 SoC
iommu/arm-smmu-v3: Properly handle the return value of arm_smmu_cmdq_build_cmd()
...
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.16-rc1.
Nothing major in here at all, just lots of tiny serial and tty driver
updates for various reported things, and some good cleanups. These
include:
- more good tty api cleanups from Jiri
- stm32 serial driver updates
- softlockup fix for non-preempt systems under high serial load
- rpmsg serial driver update
- 8250 drivers updates and fixes
- n_gsm line discipline fixes and updates as people are finally
starting to use it.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits)
tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description
serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE
tty: rpmsg: Define tty name via constant string literal
tty: rpmsg: Add pr_fmt() to prefix messages
tty: rpmsg: Use dev_err_probe() in ->probe()
tty: rpmsg: Unify variable used to keep an error code
tty: rpmsg: Assign returned id to a local variable
serial: stm32: push DMA RX data before suspending
serial: stm32: terminate / restart DMA transfer at suspend / resume
serial: stm32: rework RX dma initialization and release
serial: 8250_pci: Remove empty stub pci_quatech_exit()
serial: 8250_pci: Replace custom pci_match_id() implementation
serial: xilinx_uartps: Fix race condition causing stuck TX
serial: sunzilog: Mark sunzilog_putchar() __maybe_unused
Revert "tty: hvc: pass DMA capable memory to put_chars()"
Revert "virtio-console: remove unnecessary kmemdup()"
serial: 8250_pci: Replace dev_*() by pci_*() macros
serial: 8250_pci: Get rid of redundant 'else' keyword
serial: 8250_pci: Refactor the loop in pci_ite887x_init()
tty: add rpmsg driver
...
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
5.16-rc1.
Nothing major in here, just lots of little cleanups and additions for
new hardware, all of which have been in linux-next for a while with no
reported problems.
Included in here are:
- tiny Thunderbolt driver updates
- USB typec driver updates
- USB serial driver updates
- USB gadget driver updates
- dwc2 and dwc3 controller driver updates
- tiny USB host driver updates
- minor USB driver fixes and updates
- USB dts updates for various platforms"
* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: gadget: Mark USB_FSL_QE broken on 64-bit
usb: gadget: f_mass_storage: Disable eps during disconnect
usb: gadget: udc: core: Revise comments for USB ep enable/disable
USB: serial: keyspan: fix memleak on probe errors
USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send()
USB: serial: ch314: use usb_control_msg_recv()
USB: iowarrior: fix control-message timeouts
Documentation: USB: fix example bulk-message timeout
usb: dwc2: stm32mp15: set otg_rev
usb: dwc2: add otg_rev and otg_caps information for gadget driver
dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml
dt-bindings: usb: dwc2: Add reference to usb-drd.yaml
usb: gadget: uvc: implement dwPresentationTime and scrSourceClock
usb: gadget: uvc: use on returned header len in video_encode_isoc_sg
usb:gadget: f_uac1: fixed sync playback
Docs: usb: remove :c:func: for usb_register and usb_deregister
Docs: usb: update struct usb_driver
usb: gadget: configfs: change config attributes file operation
usb: gadget: configfs: add cfg_to_gadget_info() helper
usb: dwc3: Align DWC3_EP_* flag macros
...
Pull clk updates from Stephen Boyd:
"The usual collection of clk driver updates and new driver additions.
In terms of lines it's mainly Qualcomm and Mediatek code, supporting
various SoCs and their multitude of clk controllers.
New Drivers:
- GCC and RPMcc support for Qualcomm QCM2290 SoCs
- GCC support for Qualcomm MSM8994/MSM8992 SoCs
- LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
- Support for Mediatek MT8195 SoCs
- Initial clock driver for the Exynos850 SoC
- Add i.MX8ULP clock driver and related bindings
Updates:
- Clock power management for new SAMA7G5 SoC
- Updates to the master clock driver and sam9x60-pll to be able to
use cpufreq-dt driver and avoid overclocking of CPU and MCK0
domains while changing the frequency via DVFS
- Use ARRAY_SIZE in qcom clk drivers
- Remove some impractical fallback parent names in qcom clk drivers
- Make Mediatek clk drivers tristate
- Refactoring of the CPU clock code and conversion of Samsung
Exynos5433 CPU clock driver to the platform driver
- A few conversions to devm_platform_ioremap_resource()
- Updates of the Samsung Kconfig help text
- Update video path realted clocks for Amlogic meson8
- Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L
- Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U
- Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N
- Remove unused helpers from i.MX specific clock header
- Rework all i.MX clk based helpers to use clk_hw based ones
- Rework i.MX gate/mux/divider wrappers
- Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
- Update i.MX pllv4 and composite clocks to support i.MX8ULP
- Disable i.MX7ULP composite clock during initialization
- Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
- Disable the i.MX pfd when set pfdv2 clock rate
- Add support for i.MX8ULP in pfdv2
- Add the pcc reset controller support on i.MX8ULP
- Fix the build break when clk-imx8ulp is built as module
- Move csi_sel mux to correct base register in i.MX6UL clock drivr
- Fix csi clk gate register in i.MX6UL clock driver
- Fix build bug making CLK_IMX8ULP select MXC_CLK
- Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U
- Add Ethernet clocks on Renesas RZ/G2L
- Move Rockchip to use module_platform_probe
- Enable usage of Coresight related clocks on Rockchip rk3399"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (170 commits)
clk: use clk_core_get_rate_recalc() in clk_rate_get()
clk: at91: sama7g5: set low limit for mck0 at 32KHz
clk: at91: sama7g5: remove prescaler part of master clock
clk: at91: clk-master: add notifier for divider
clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
clk: at91: clk-master: fix prescaler logic
clk: at91: clk-master: mask mckr against layout->mask
clk: at91: clk-master: check if div or pres is zero
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
clk: at91: pmc: add sama7g5 to the list of available pmcs
clk: at91: clk-master: improve readability by using local variables
clk: at91: clk-master: add register definition for sama7g5's master clock
clk: at91: sama7g5: add securam's peripheral clock
clk: at91: pmc: execute suspend/resume only for backup mode
clk: at91: re-factor clocks suspend/resume
clk: ux500: Add driver for the reset portions of PRCC
dt-bindings: clock: u8500: Rewrite in YAML and extend
clk: composite: Use rate_ops.determine_rate when also a mux is available
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
...
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
Pull ARM SoC updates from Arnd Bergmann:
"The SoC updates this time are mainly removing obsolete code from the
OMAP2 platform, another step in the eternal cleanup of that platform.
There are two new SoCs getting added: STMicroelectronics stm32mp13 and
Microchip lan966. Both fit into existing platforms and require minimal
changes here.
A couple of MAINTAINER file updates relate to those changes, and
update some file paths"
* tag 'soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
MAINTAINERS: Update BCM7XXX entry with additional patterns
MAINTAINERS: add pinctrl-apple-gpio to ARM/APPLE MACHINE
MAINTAINERS: Add pasemi i2c to ARM/APPLE MACHINE
ARM: SPEAr: Update MAINTAINERS entries
ARM: OMAP2+: Drop unused CM defines for am3
ARM: OMAP2+: Drop unused CM and SCRM defines for omap4
ARM: OMAP2+: Drop unused CM and SCRM defines for omap5
ARM: OMAP2+: Drop unused CM defines for dra7
ARM: OMAP2+: Drop unused PRM defines for am3
ARM: OMAP2+: Drop unused PRM defines for am4
ARM: OMAP2+: Drop unused PRM defines for omap4
ARM: OMAP2+: Drop unused PRM defines for omap5
ARM: OMAP2+: Drop unused PRM defines for dra7
ARM: OMAP2+: Fix comment typo
ARM: OMAP2+: Fix typo in some comments
ARM: at91: add basic support for new SoC family lan966
dt-bindings: arm: at91: Document lan966 pcb8291 and pcb8290 boards
ARM: at91: Documentation: add lan966 family
ARM: at91: Documentation: add sama7g5 family
MAINTAINERS: add an entry for NXP S32G boards
...
Pull sound updates from Takashi Iwai:
"Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest.
Note that a few changes in the unusual places like arch/sh are
included, which are a part of ASoC DAI format cleanups.
ALSA core:
- Continued memalloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU"
* tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (513 commits)
ALSA: usb-audio: Add quirk for Audient iD14
ALSA: hda/realtek: Add quirk for Clevo PC70HS
ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirk
ALSA: usb-audio: Add registration quirk for JBL Quantum 400
ASoC: rsnd: Fix an error handling path in 'rsnd_node_count()'
ASoC: tlv320aic3x: Make aic3x_remove() return void
ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs
ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s
ASoC: Intel: sof_rt5682: detect codec variant in probe function
ASoC: soc-acpi: add comp_ids field for machine driver matching
ASoC: mediatek: mt8195: add mt8195-mt6359-rt1011-rt5682 bindings document
ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682
ASoC: Stop dummy from overriding hwparams
ASoC: topology: Change topology device to card device
ASoC: topology: Use correct device for prints
ASoC: topology: Check for dapm widget completeness
ASoC: topology: Add header payload_size verification
ASoC: core: Remove invalid snd_soc_component_set_jack call
...
Pull devicetree updates from Rob Herring:
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP
ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and
boards, and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
* tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits)
dt-bindings: net: ti,bluetooth: Document default max-speed
dt-bindings: pci: rcar-pci-ep: Document r8a7795
dt-bindings: net: qcom,ipa: IPA does support up to two iommus
of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem()
of: unittest: document intentional interrupt-map provider build warning
of: unittest: fix EXPECT text for gpio hog errors
of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings
scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml
dt-bindings: display: tilcd: Fix endpoint addressing in example
dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml
dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible
dt-bindings: ufs: exynos-ufs: add io-coherency property
dt-bindings: mips: convert Ralink SoCs and boards to schema
dt-bindings: display: xilinx: Fix example with psgtr
dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
dt-bindings: Add a help message when dtschema tools are missing
dt-bindings: bus: ti-sysc: Update to use yaml binding
dt-bindings: sram: Allow numbers in sram region node name
dt-bindings: display: Document the Xylon LogiCVC display controller
...
According to the datasheet "The CAP1206 is pin- and register-compatible
with the CAP1106, with the exception of the GAIN[1:0] bits and ALT_POL
bit"(57). So, this patch aims to disable them as they are no longer
used.
Signed-off-by: Jesse Taube <mr.bossman075@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull drm updates from Dave Airlie:
"Summary below. i915 starts to add support for DG2 GPUs, enables DG1
and ADL-S support by default, lots of work to enable DisplayPort 2.0
across drivers. Lots of documentation updates and fixes across the
board.
core:
- improve dma_fence, lease and resv documentation
- shmem-helpers: allocate WC pages on x86, use vmf_insert_pin
- sched fixes/improvements
- allow empty drm leases
- add dma resv iterator
- add more DP 2.0 headers
- DP MST helper improvements for DP2.0
dma-buf:
- avoid warnings, remove fence trace macros
bridge:
- new helper to get rid of panels
- probe improvements for it66121
- enable DSI EOTP for anx7625
fbdev:
- efifb: release runtime PM on destroy
ttm:
- kerneldoc switch
- helper to clear all DMA mappings
- pool shrinker optimizaton
- remove ttm_tt_destroy_common
- update ttm_move_memcpy for async use
panel:
- add new panel-edp driver
amdgpu:
- Initial DP 2.0 support
- Initial USB4 DP tunnelling support
- Aldebaran MCE support
- Modifier support for DCC image stores for GFX 10.3
- Display rework for better FP code handling
- Yellow Carp/Cyan Skillfish updates
- Cyan Skillfish display support
- convert vega/navi to IP discovery asic enumeration
- validate IP discovery table
- RAS improvements
- Lots of fixes
i915:
- DG1 PCI IDs + LMEM discovery/placement
- DG1 GuC submission by default
- ADL-S PCI IDs updated + enabled by default
- ADL-P (XE_LPD) fixed and updates
- DG2 display fixes
- PXP protected object support for Gen12 integrated
- expose multi-LRC submission interface for GuC
- export logical engine instance to user
- Disable engine bonding on Gen12+
- PSR cleanup
- PSR2 selective fetch by default
- DP 2.0 prep work
- VESA vendor block + MSO use of it
- FBC refactor
- try again to fix fast-narrow vs slow-wide eDP training
- use THP when IOMMU enabled
- LMEM backup/restore for suspend/resume
- locking simplification
- GuC major reworking
- async flip VT-D workaround changes
- DP link training improvements
- misc display refactorings
bochs:
- new PCI ID
rcar-du:
- Non-contiguious buffer import support for rcar-du
- r8a779a0 support prep
omapdrm:
- COMPILE_TEST fixes
sti:
- COMPILE_TEST fixes
msm:
- fence ordering improvements
- eDP support in DP sub-driver
- dpu irq handling cleanup
- CRC support for making igt happy
- NO_CONNECTOR bridge support
- dsi: 14nm phy support for msm8953
- mdp5: msm8x53, sdm450, sdm632 support
stm:
- layer alpha + zpo support
v3d:
- fix Vulkan CTS failure
- support multiple sync objects
gud:
- add R8/RGB332/RGB888 pixel formats
vc4:
- convert to new bridge helpers
vgem:
- use shmem helpers
virtio:
- support mapping exported vram
zte:
- remove obsolete driver
rockchip:
- use bridge attach no connector for LVDS/RGB"
* tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits)
drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits
drm/amd/display: MST support for DPIA
drm/amdgpu: Fix even more out of bound writes from debugfs
drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts
drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts
drm/amdgpu/UAPI: rearrange header to better align related items
drm/amd/display: Enable dpia in dmub only for DCN31 B0
drm/amd/display: Fix USB4 hot plug crash issue
drm/amd/display: Fix deadlock when falling back to v2 from v3
drm/amd/display: Fallback to clocks which meet requested voltage on DCN31
drm/amd/display: move FPU associated DCN301 code to DML folder
drm/amd/display: fix link training regression for 1 or 2 lane
drm/amd/display: add two lane settings training options
drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings
drm/amd/display: implement decide lane settings
drm/amd/display: adopt DP2.0 LT SCR revision 8
drm/amd/display: FEC configuration for dpia links in MST mode
drm/amd/display: FEC configuration for dpia links
drm/amd/display: Add workaround flag for EDID read on certain docks
drm/amd/display: Set phy_mux_sel bit in dmub scratch register
...
Pull thermal control updates from Rafael Wysocki:
"These extend the thermal trip point crossing notifications sent via
netlink to contain the temperature causing the trip point to be
crossed, deprecate the user space thermal governor, add new DT
bindings to drivers, move ABI documentation to Documentation/ABI, fix
assorted issues and clean up code.
Specifics:
- Constify a variable in thermal MMIO driver (Rikard Falkeborn).
- Add the current temperature in the netlink message when crossing a
trip point in order to prevent useless back and forth reading from
userspace (Daniel Lezcano).
- Add support for the 'HC' variant on PM8998 PMIC in order to support
VADC channels on recent QCom boards (Bjorn Andersson).
- Add support for calibration values from hardware when they are
fused (Niklas Söderlund).
- Fix NULL pointer dereference in the thermal_release callback when
an error occurs in the thermal_zone_device_register() (Yuanzheng
Song).
- Fix use-after-free in __thermal_cooling_device_register() in the
error path (Ziyang Xuan).
- Fix compilation of the LMh driver when CONFIG_QCOM_SCM is not set
(Jackie Liu).
- Add timeout when reading a register that can block forever in
certain circumstances in the tsens driver (Ansuel Smith).
- Add DT binding for the reset lines and use them in the rockchip
sensor driver (Johan Jonker).
- Add new uniphier NX1 SoC temperature sensor (Kunihiko Hayashi).
- Save and restore the TCC value in the int340x driver (Antoine
Tenart).
- Deprecate the writability of the cooling device state sysfs file
and the user space governor (Daniel Lezcano).
- Delete bogus length check in int340x (Dan Carpenter).
- Use bitmap_zalloc/bitmap_free when applicable in intel_powerclamp
(Christophe JAILLET).
- Move thermal ABI documentation to Documentation/ABI (Mauro Carvalho
Chehab)"
* tag 'thermal-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (21 commits)
thermal/core: Deprecate changing cooling device state from userspace
thermal/core: Make the userspace governor deprecated
thermal/drivers/int340x: Improve the tcc offset saving for suspend/resume
thermal/drivers/uniphier: Add compatible string for NX1 SoC
dt-bindings: thermal: uniphier: Add binding for NX1 SoC
thermal/drivers/rockchip_thermal: Allow more resets for tsadc node
dt-bindings: thermal: remove redundant comments from rockchip-thermal.yaml
dt-bindings: thermal: allow more resets for tsadc node in rockchip-thermal.yaml
thermal/drivers/tsens: Add timeout to get_temp_tsens_valid
thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCM
thermal/core: fix a UAF bug in __thermal_cooling_device_register()
thermal/core: Fix null pointer dereference in thermal_release()
thermal: rcar_gen3_thermal: Read calibration from hardware
thermal: rcar_gen3_thermal: Store thcode and ptat in priv data
thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant
dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor bindings
thermal: Move ABI documentation to Documentation/ABI
thermal/drivers/netlink: Add the temperature when crossing a trip point
thermal/drivers/thermal_mmio: Constify static struct thermal_mmio_ops
thermal: int340x: delete bogus length check
...
* clk-composite-determine-fix:
clk: composite: Use rate_ops.determine_rate when also a mux is available
clk: composite: Also consider .determine_rate for rate + mux composites
* clk-allwinner:
clk: sunxi: sun8i-apb0: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-ar100: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-apb0-gates: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-apb0: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80-usb: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80-de: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-r40: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-de2: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-a83t: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun50i-h6: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun50i-a64: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: clk-mod0: Make use of the helper function devm_platform_ioremap_resource()
dt-bindings: clocks: Fix typo in the H6 compatible
clk: sunxi-ng: Use a separate lock for each CCU instance
clk: sunxi-ng: Prevent unbinding CCUs via sysfs
clk: sunxi-ng: Unregister clocks/resets when unbinding
clk: sunxi-ng: Add machine dependency to A83T CCU
clk: sunxi-ng: mux: Remove unused 'reg' field
* clk-amlogic:
clk: meson: meson8b: Make the video clock trees mutable
clk: meson: meson8b: Initialize the HDMI PLL registers
clk: meson: meson8b: Add the HDMI PLL M/N parameters
clk: meson: meson8b: Add the vid_pll_lvds_en gate clock
clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel
clk: meson: meson8b: Export the video clocks
* clk-samsung:
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
clk: samsung: add support for CPU clocks
clk: samsung: Introduce Exynos850 clock driver
dt-bindings: clock: Document Exynos850 CMU bindings
dt-bindings: clock: Add bindings definitions for Exynos850 CMU
clk: samsung: clk-pll: Implement pll0831x PLL type
clk: samsung: clk-pll: Implement pll0822x PLL type
clk: samsung: s5pv210-audss: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos5433: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos4412-isp: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos-audss: Make use of devm_platform_ioremap_resource()
* clk-imx: (21 commits)
clk: imx: Make CLK_IMX8ULP select MXC_CLK
clk: imx: imx6ul: Fix csi clk gate register
clk: imx: imx6ul: Move csi_sel mux to correct base register
clk: imx: Fix the build break when clk-imx8ulp build as module
clk: imx: Add the pcc reset controller support on imx8ulp
clk: imx: Add clock driver for imx8ulp
clk: imx: Update the pfdv2 for 8ulp specific support
clk: imx: disable the pfd when set pfdv2 clock rate
clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp
clk: imx: disable i.mx7ulp composite clock during initialization
clk: imx: Update the compsite driver to support imx8ulp
clk: imx: Update the pllv4 to support imx8ulp
dt-bindings: clock: Add imx8ulp clock support
clk: imx: Rework imx_clk_hw_pll14xx wrapper
clk: imx: Rework all imx_clk_hw_composite wrappers
clk: imx: Rework all clk_hw_register_divider wrappers
clk: imx: Rework all clk_hw_register_mux wrappers
clk: imx: Rework all clk_hw_register_gate2 wrappers
clk: imx: Rework all clk_hw_register_gate wrappers
clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones
...
* clk-ux500:
clk: ux500: Add driver for the reset portions of PRCC
dt-bindings: clock: u8500: Rewrite in YAML and extend
* clk-debugfs:
clk: use clk_core_get_rate_recalc() in clk_rate_get()
Pull operating performance points (OPP) framework updates for 5.16-rc1
from Viresh Kumar:
"- Fix return value of _opp_add_static_v2() helper (YueHaibing).
- Fix required-opp handle count (Pavankumar Kondeti).
- Resource managed OPP helpers, type update to
dev_pm_opp_attach_genpd() and update to their devfreq users, and
minor DT binding change (Dmitry Osipenko)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: Allow multi-worded OPP entry name
opp: Fix return in _opp_add_static_v2()
PM / devfreq: tegra30: Check whether clk_round_rate() returns zero rate
PM / devfreq: tegra30: Use resource-managed helpers
PM / devfreq: Add devm_devfreq_add_governor()
opp: Add more resource-managed variants of dev_pm_opp_of_add_table()
opp: Change type of dev_pm_opp_attach_genpd(names) argument
opp: Fix required-opps phandle array count check
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
Pull crypto updates from Herbert Xu:
"API:
- Delay boot-up self-test for built-in algorithms
Algorithms:
- Remove fallback path on arm64 as SIMD now runs with softirq off
Drivers:
- Add Keem Bay OCS ECC Driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (61 commits)
crypto: testmgr - fix wrong key length for pkcs1pad
crypto: pcrypt - Delay write to padata->info
crypto: ccp - Make use of the helper macro kthread_run()
crypto: sa2ul - Use the defined variable to clean code
crypto: s5p-sss - Add error handling in s5p_aes_probe()
crypto: keembay-ocs-ecc - Add Keem Bay OCS ECC Driver
dt-bindings: crypto: Add Keem Bay ECC bindings
crypto: ecc - Export additional helper functions
crypto: ecc - Move ecc.h to include/crypto/internal
crypto: engine - Add KPP Support to Crypto Engine
crypto: api - Do not create test larvals if manager is disabled
crypto: tcrypt - fix skcipher multi-buffer tests for 1420B blocks
hwrng: s390 - replace snprintf in show functions with sysfs_emit
crypto: octeontx2 - set assoclen in aead_do_fallback()
crypto: ccp - Fix whitespace in sev_cmd_buffer_len()
hwrng: mtk - Force runtime pm ops for sleep ops
crypto: testmgr - Only disable migration in crypto_disable_simd_for_test()
crypto: qat - share adf_enable_pf2vf_comms() from adf_pf2vf_msg.c
crypto: qat - extract send and wait from adf_vf2pf_request_version()
crypto: qat - add VF and PF wrappers to common send function
...
Not all OPP entries fit into a single word. In particular NVIDIA Tegra OPP
tables use multi-word names. Allow OPP entry to have multi-worded name
separated by hyphen. This silences DT checker warnings about wrong naming
scheme.
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull hwmon updates from Guenter Roeck:
"New driver:
- Maxim MAX6620
Notable functional enhancements:
- Add Asus WMI support to nct6775 driver, and list boards supporting
it
- Move TMP461 support from tm401 driver to lm90 driver
- Add support for fanX_min, fanX_max and fanX_target to dell-smm
driver, and clean it up while doing so
- Extend mlxreg-fan driver to support multiple cooling devices and
multiple PWM channels. Also increase number of supported fan
tachometers.
- Add a new customer ID (for ASRock) to nct6683 driver
- Make temperature/voltage sensors on nct7802 configurable
- Add mfg_id debugfs entry to pmbus/ibm-cffps driver
- Support configurable sense resistor values in pmbus/lm25066, and
fix various coefficients
- Use generic notification mechanism in raspberrypi driver
Notable cleanups:
- Convert various devicetree bindings to dtschema, and add missing
bindings
- Convert i5500_temp and tmp103 drivers to
devm_hwmon_device_register_with_info
- Clean up non-bool "valid" data fields
- Improve devicetree configurability for tmp421 driver"
* tag 'hwmon-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (73 commits)
hwmon: (nct7802) Add of_node_put() before return
hwmon: (tmp401) Drop support for TMP461
hwmon: (lm90) Add basic support for TI TMP461
hwmon: (lm90) Introduce flag indicating extended temperature support
hwmon: (nct6775) add ProArt X570-CREATOR WIFI.
hwmon: (nct7802) Make temperature/voltage sensors configurable
dt-bindings: hwmon: Add nct7802 bindings
hwmon: (dell-smm) Speed up setting of fan speed
hwmon: (dell-smm) Add comment explaining usage of i8k_config_data[]
hwmon: (dell-smm) Return -ENOIOCTLCMD instead of -EINVAL
hwmon: (dell-smm) Use strscpy_pad()
hwmon: (dell-smm) Sort includes in alphabetical order
hwmon: (tmp421) Add of_node_put() before return
hwmon: (max31722) Warn about failure to put device in stand-by in .remove()
hwmon: (acpi_power_meter) Use acpi_bus_get_acpi_device()
hwmon: (dell-smm) Add support for fanX_min, fanX_max and fanX_target
dt-bindings: hwmon: allow specifying channels for tmp421
hwmon: (tmp421) ignore non-channel related DT nodes
hwmon: (tmp421) update documentation
hwmon: (tmp421) support HWMON_T_ENABLE
...
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI, there's been a bit of cleanup
to the core from Uwe but nothing functionality wise.
We have added several new drivers, Cadence XSPI, Ingenic JZ47xx,
Qualcomm SC7280 and SC7180 and Xilinx Versal OSPI"
* tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (41 commits)
spi: Convert NXP flexspi to json schema
spi: spi-geni-qcom: Add support for GPI dma
spi: fsi: Fix contention in the FSI2SPI engine
spi: spi-rpc-if: Check return value of rpcif_sw_init()
spi: tegra210-quad: Put device into suspend on driver removal
spi: tegra20-slink: Put device into suspend on driver removal
spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
spi: at91-usart: replacing legacy gpio interface for gpiod
spi: replace snprintf in show functions with sysfs_emit
spi: cadence: Add of_node_put() before return
spi: orion: Add of_node_put() before goto
spi: cadence-quadspi: fix dma_unmap_single() call
spi: tegra20: fix build with CONFIG_PM_SLEEP=n
spi: bcm-qspi: add support for 3-wire mode for half duplex transfer
spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode
spi: Make several public functions private to spi.c
spi: Reorder functions to simplify the next commit
spi: Remove unused function spi_busnum_to_master()
spi: Move comment about chipselect check to the right place
spi: fsi: Print status on error
...
Pull regulator updates from Mark Brown:
"Thanks to the removal of the unused TPS80021 driver the regulator
updates for this cycle actually have a negative diffstat.
Otherwise it's been quite a quiet release, lots of fixes and small
improvements with the biggest individual changes being several
conversions of DT bindings to YAML format"
* tag 'regulator-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits)
regulator: Don't error out fixed regulator in regulator_sync_voltage()
regulator: tps80031: Remove driver
regulator: Fix SY7636A breakage
regulator: uniphier: Add binding for NX1 SoC
regulator: uniphier: Add USB-VBUS compatible string for NX1 SoC
regulator: qcom,rpmh: Add compatible for PM6350
regulator: qcom-rpmh: Add PM6350 regulators
regulator: sy7636a: Remove requirement on sy7636a mfd
regulator: tps62360: replacing legacy gpio interface for gpiod
regulator: lp872x: Remove lp872x_dvs_state
regulator: lp872x: replacing legacy gpio interface for gpiod
regulator: dt-bindings: samsung,s5m8767: convert to dtschema
regulator: dt-bindings: samsung,s2mpa01: convert to dtschema
regulator: dt-bindings: samsung,s2m: convert to dtschema
dt-bindings: clock: samsung,s2mps11: convert to dtschema
regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property
regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled
regulator: dt-bindings: maxim,max8973: convert to dtschema
regulator: dt-bindings: maxim,max8997: convert to dtschema
regulator: dt-bindings: maxim,max8952: convert to dtschema
...
Pull mailbox updates from Jassi Brar:
"qcom:
- add support for qcm2290
- consolidate msm8994 type apcs_data
mtk:
- fix clock id usage
apple:
- add driver for ASC/M3 controllers
pcc:
- reorganise PCC pcc_mbox_request_channel
- add support for PCCT extended PCC subspaces
misc:
- make use of devm_platform_ioremap_resource()
- change Altera, PCC and Apple mailbox maintainers"
* tag 'mailbox-v5.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (38 commits)
mailbox: imx: support i.MX8ULP S4 MU
dt-bindings: mailbox: imx-mu: add i.MX8ULP S400 MU support
ACPI/PCC: Add maintainer for PCC mailbox driver
mailbox: pcc: Move bulk of PCCT parsing into pcc_mbox_probe
mailbox: pcc: Add support for PCCT extended PCC subspaces(type 3/4)
mailbox: pcc: Drop handling invalid bit-width in {read,write}_register
mailbox: pcc: Avoid accessing PCCT table in pcc_send_data and pcc_mbox_irq
mailbox: pcc: Add PCC register bundle and associated accessor functions
mailbox: pcc: Rename doorbell ack to platform interrupt ack register
mailbox: pcc: Use PCC mailbox channel pointer instead of standard
mailbox: pcc: Add pcc_mbox_chan structure to hold shared memory region info
mailbox: pcc: Consolidate subspace doorbell register parsing
mailbox: pcc: Consolidate subspace interrupt information parsing
mailbox: pcc: Refactor all PCC channel information into a structure
mailbox: pcc: Fix kernel doc warnings
mailbox: apple: Add driver for Apple mailboxes
dt-bindings: mailbox: Add Apple mailbox bindings
MAINTAINERS: Add Apple mailbox files
mailbox: mtk-cmdq: Fix local clock ID usage
mailbox: mtk-cmdq: Validate alias_id on probe
...
Pull MMC and MEMSTICK updates from Ulf Hansson:
"MMC core:
- Update maintainer and URL for the mmc-utils
- Set default label for slot-gpio in case of no con-id
- Convert MMC card DT bindings to a schema
- Add optional host specific tuning support for eMMC HS400
- Add error handling of add_disk()
MMC host:
- mtk-sd: Add host specific tuning support for eMMC HS400
- mtk-sd: Make DMA handling more robust
- dw_mmc: Prevent hangs for some data writes
- dw_mmc: Move away from using the ->init_card() callback
- mxs-mmc: Manage the regulator in the error path and in ->remove()
- sdhci-cadence: Add support for the Microchip MPFS variant
- sdhci-esdhc-imx: Add support for the NXP S32G2 variant
- sdhci-of-arasan: Add support for the Intel Thunder Bay variant
- sdhci-omap: Prepare to support more SoCs
- sdhci-omap: Add support for omap3 and omap4 variants
- sdhci-omap: Add support for power management
- sdhci-omap: Add support for system wakeups
- sdhci-msm: Add support for the msm8226 variant
- sdhci-sprd: Verify that the DLL locks according to spec
MEMSTICK:
- Add error handling of add_disk()
- A couple of small fixes and improvements"
* tag 'mmc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (60 commits)
docs: mmc: update maintainer name and URL
mmc: dw_mmc: exynos: Fix spelling mistake "candiates" -> candidates
MAINTAINERS: drop obsolete file pattern in SDHCI DRIVER section
mmc: sdhci-esdhc-imx: add NXP S32G2 support
dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G2 support
mmc: dw_mmc: Drop use of ->init_card() callback
mmc: sdhci-omap: Fix build if CONFIG_PM_SLEEP is not set
mmc: sdhci-omap: Remove forward declaration of sdhci_omap_context_save()
memstick: r592: Fix a UAF bug when removing the driver
mmc: mxs-mmc: disable regulator on error and in the remove function
mmc: sdhci-omap: Configure optional wakeirq
mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM
mmc: sdhci-omap: Implement PM runtime functions
mmc: sdhci-omap: Add omap_offset to support omap3 and earlier
mmc: sdhci-omap: Handle voltages to add support omap4
dt-bindings: sdhci-omap: Update binding for legacy SoCs
mmc: sdhci-pci: Remove dead code (rst_n_gpio et al)
mmc: sdhci-pci: Remove dead code (cd_gpio, cd_irq et al)
mmc: sdhci-pci: Remove dead code (struct sdhci_pci_data et al)
mmc: sdhci: Remove unused prototype declaration in the header
...
Pull IPMI driver updates from Corey Minyard:
"A new type of low-level IPMI driver is added for direct communication
over the IPMI message bus without a BMC between the driver and the
bus.
Other than that, lots of little bug fixes and enhancements"
* tag 'for-linus-5.16-1' of https://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc: Fix a memory leak in the error handling path of 'kcs_bmc_serio_add_device()'
char: ipmi: replace snprintf in show functions with sysfs_emit
ipmi: ipmb: fix dependencies to eliminate build error
ipmi:ipmb: Add OF support
ipmi: bt: Add ast2600 compatible string
ipmi: bt-bmc: Use registers directly
ipmi: ipmb: Fix off-by-one size check on rcvlen
ipmi:ssif: Use depends on, not select, for I2C
ipmi: Add docs for the IPMI IPMB driver
ipmi: Add docs for IPMB direct addressing
ipmi:ipmb: Add initial support for IPMI over IPMB
ipmi: Add support for IPMB direct messages
ipmi: Export ipmb_checksum()
ipmi: Fix a typo
ipmi: Check error code before processing BMC response
ipmi:devintf: Return a proper error when recv buffer too small
ipmi: Disable some operations during a panic
ipmi:watchdog: Set panic count to proper value on a panic
Pull media updates from Mauro Carvalho Chehab:
- New driver for SK Hynix Hi-846 8M pixel camera
- New driver for the ov13b10 camera
- New driver for Renesas R-Car ISP
- mtk-vcodec gained support for version 2 of decoder firmware ABI
- The legacy sir_ir driver got removed
- videobuf2: the vb2_mem_ops kAPI had some improvements
- lots of cleanups, fixes and new features at device drivers
* tag 'media/v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: venus: core: Add sdm660 DT compatible and resource struct
media: dt-bindings: media: venus: Add sdm660 dt schema
media: venus: vdec: decoded picture buffer handling during reconfig sequence
media: venus: Handle fatal errors during encoding and decoding
media: venus: helpers: Add helper to mark fatal vb2 error
media: venus: hfi: Check for sys error on session hfi functions
media: venus: Make sys_error flag an atomic bitops
media: venus: venc: Use pmruntime autosuspend
media: allegro: write vui parameters for HEVC
media: allegro: nal-hevc: implement generator for vui
media: allegro: write correct colorspace into SPS
media: allegro: extract nal value lookup functions to header
media: allegro: correctly scale the bit rate in SPS
media: allegro: remove external QP table
media: allegro: fix row and column in response message
media: allegro: add control to disable encoder buffer
media: allegro: add encoder buffer support
media: allegro: add pm_runtime support
media: allegro: lookup VCU settings
media: allegro: fix module removal if initialization failed
...
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core changes:
- Prevent a potential deadlock when initial priority is assigned to a
newly created interrupt thread. A recent change to plug a race
between cpuset and __sched_setscheduler() introduced a new lock
dependency which is now triggered. Break the lock dependency chain
by moving the priority assignment to the thread function.
- A couple of small updates to make the irq core RT safe.
- Confine the irq_cpu_online/offline() API to the only left unfixable
user Cavium Octeon so that it does not grow new usage.
- A small documentation update
Driver changes:
- A large cross architecture rework to move irq_enter/exit() into the
architecture code to make addressing the NOHZ_FULL/RCU issues
simpler.
- The obligatory new irq chip driver for Microchip EIC
- Modularize a few irq chip drivers
- Expand usage of devm_*() helpers throughout the driver code
- The usual small fixes and improvements all over the place"
* tag 'irq-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
h8300: Fix linux/irqchip.h include mess
dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindings
MIPS: irq: Avoid an unused-variable error
genirq: Hide irq_cpu_{on,off}line() behind a deprecated option
irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()
MIPS: loongson64: Drop call to irq_cpu_offline()
irq: remove handle_domain_{irq,nmi}()
irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: riscv: perform irqentry in entry code
irq: openrisc: perform irqentry in entry code
irq: csky: perform irqentry in entry code
irq: arm64: perform irqentry in entry code
irq: arm: perform irqentry in entry code
irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: add generic_handle_arch_irq()
irq: unexport handle_irq_desc()
irq: simplify handle_domain_{irq,nmi}()
irq: mips: simplify do_domain_IRQ()
...
