Commit Graph

115 Commits

Author SHA1 Message Date
Jed Davis
c5f927a6f6 ARM: 7765/1: perf: Record the user-mode PC in the call chain.
With this change, we no longer lose the innermost entry in the user-mode
part of the call chain.  See also the x86 port, which includes the ip.

It's possible to partially work around this problem by post-processing
the data to use the PERF_SAMPLE_IP value, but this works only if the CPU
wasn't in the kernel when the sample was taken.

Cc: <stable@vger.kernel.org>
Signed-off-by: Jed Davis <jld@mozilla.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-24 15:23:29 +01:00
Will Deacon
cb2d8b342a ARM: 7698/1: perf: fix group validation when using enable_on_exec
Events may be created with attr->disabled == 1 and attr->enable_on_exec
== 1, which confuses the group validation code because events with the
PERF_EVENT_STATE_OFF are not considered candidates for scheduling, which
may lead to failure at group scheduling time.

This patch fixes the validation check for ARM, so that events in the
OFF state are still considered when enable_on_exec is true.

Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Reported-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-17 16:54:07 +01:00
Stephen Boyd
44d6b1fc3e ARM: 7667/1: perf: Fix section mismatch on armpmu_init()
WARNING: vmlinux.o(.text+0xfb80): Section mismatch in reference
from the function armpmu_register() to the function
.init.text:armpmu_init()
The function armpmu_register() references
the function __init armpmu_init().
This is often because armpmu_register lacks a __init
annotation or the annotation of armpmu_init is wrong.

Just drop the __init marking on armpmu_init() because
armpmu_register() no longer has an __init marking.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-06 23:45:43 +00:00
Chen Gang
e595ede605 ARM: 7664/1: perf: remove erroneous semicolon from event initialisation
Commit 9dcbf46655 ("ARM: perf: simplify __hw_perf_event_init err
handling") tidied up the error handling code for perf event
initialisation on ARM, but a copy-and-paste error left a dangling
semicolon at the end of an if statement.

This patch removes the broken semicolon, restoring the old group
validation semantics.

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:17 +00:00
Mark Rutland
9dcbf46655 ARM: perf: simplify __hw_perf_event_init err handling
Currently __hw_perf_event_init has an err variable that's ignored right
until the end, where it's initialised, conditionally set, and then used
as a boolean flag deciding whether to return another error code.

This patch removes the err variable and simplifies the associated error
handling logic.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-01-18 16:54:30 +00:00
Mark Rutland
8f3b90b585 ARM: perf: remove unnecessary checks for idx < 0
We currently check for hwx->idx < 0 in armpmu_read and armpmu_del
unnecessarily. The only case where hwc->idx < 0 is when armpmu_add
fails, in which case the event's state is set to
PERF_EVENT_STATE_INACTIVE.

The perf core will not attempt to read from an event in
PERF_EVENT_STATE_INACTIVE, and so the check in armpmu_read is
unnecessary. Similarly, if perf core cannot add an event it will not
attempt to delete it, so the WARN_ON in armpmu_del is unnecessary.

This patch removes these two redundant checks.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-01-18 13:46:09 +00:00
Jon Hunter
2ac29a14a8 ARM: PMU: fix runtime PM enable
Commit 7be2958 (ARM: PMU: Add runtime PM Support) updated the ARM PMU code to
use runtime PM which was prototyped and validated on the OMAP devices. In this
commit, there is no call pm_runtime_enable() and for OMAP devices
pm_runtime_enable() is currently being called from the OMAP PMU code when the
PMU device is created. However, there are two problems with this:

1. For any other ARM device wishing to use runtime PM for PMU they will need
   to call pm_runtime_enable() for runtime PM to work.
2. When booting with device-tree and using device-tree to create the PMU
   device, pm_runtime_enable() needs to be called from within the ARM PERF
   driver as we are no longer calling any device specific code to create the
   device. Hence, PMU does not work on OMAP devices that use the runtime PM
   callbacks when using device-tree to create the PMU device.

Therefore,  call pm_runtime_enable() directly from the ARM PMU driver when
registering the device. For platforms that do not use runtime PM,
pm_runtime_enable() does nothing and for platforms that do use runtime PM but
may not require it specifically for PMU, this will just add a little overhead
when initialising and uninitialising the PMU device.

Tested with PERF on OMAP2420, OMAP3430 and OMAP4460.

Acked-by: Kevin Hilman <khilman@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-11-09 11:37:26 +00:00
Will Deacon
0305230a3d ARM: perf: consistently use arm_pmu->name for PMU name
Perf has three ways to name a PMU: either by passing an explicit char *,
reading arm_pmu->name or accessing arm_pmu->pmu.name.

Just use arm_pmu->name consistently in the ARM backend.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-11-09 11:37:26 +00:00
Sudeep KarkadaNagesha
ed6f2a5223 ARM: perf: consistently use struct perf_event in arm_pmu functions
The arm_pmu functions have wildly varied parameters which can often be
derived from struct perf_event.

This patch changes the arm_pmu function prototypes so that struct
perf_event pointers are passed in preference to fields that can be
derived from the event.

Signed-off-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-11-09 11:37:25 +00:00
Marc Zyngier
e50c54189f ARM: perf: add guest vs host discrimination
Add minimal guest support to perf, so it can distinguish whether
the PMU interrupt was in the host or the guest, as well as collecting
some very basic information (guest PC, user vs kernel mode).

This is not feature complete though, as it doesn't support backtracing
in the guest.

Based on the x86 implementation, tested with KVM/ARM.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-11-09 11:37:24 +00:00
Will Deacon
3581fe0ef3 ARM: 7556/1: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD
The PERF_EVENT_IOC_PERIOD ioctl command can be used to change the
sample period of a running perf_event. Consequently, when calculating
the next event period, the new period will only be considered after the
previous one has overflowed.

This patch changes the calculation of the remaining event ticks so that
they are offset if the period has changed.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-18 11:05:20 +01:00
Sudeep KarkadaNagesha
051f1b1314 ARM: perf: move irq registration into pmu implementation
This patch moves the CPU-specific IRQ registration and parsing code into
the CPU PMU backend. This is required because a PMU may have more than
one interrupt, which in turn can be either PPI (per-cpu) or SPI
(requiring strict affinity setting at the interrupt distributor).

Signed-off-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
[will: cosmetic edits and reworked interrupt dispatching]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23 11:35:52 +01:00
Will Deacon
5505b206ca ARM: perf: move CPU-specific PMU handling code into separate file
This patch moves the CPU-specific PMU handling code out of perf_event.c
and into perf_event_cpu.c.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23 11:35:52 +01:00
Will Deacon
6dbc002970 ARM: perf: prepare for moving CPU PMU code into separate file
The CPU PMU code is tightly coupled with generic ARM PMU handling code.
This makes it cumbersome when trying to add support for other ARM PMUs
(e.g. interconnect, L2 cache controller, bus) as the generic parts of
the code are not readily reusable.

This patch cleans up perf_event.c so that reusable code is exposed via
header files to other potential PMU drivers. The CPU code is
consistently named to identify it as such and also to prepare for moving
it into a separate file.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23 11:35:52 +01:00
Will Deacon
04236f9fe0 ARM: perf: probe devicetree in preference to current CPU
The CPU PMU is probed using the current cpuid information as part of the
early_initcall initialising the architecture perf backend. For
architectures without NMI (such as ARM), this does not need to be
performed early and can be deferred to the driver probe callback. This
also allows us to probe the devicetree in preference to parsing the
current cpuid, which may be invalid on a big.LITTLE multi-cluster
system.

This patch defers the PMU probing and uses the devicetree information
when available.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23 11:35:52 +01:00
Will Deacon
9f44f9a234 ARM: perf: remove mysterious compiler barrier
There's a rather strange compiler barrier in the PMU disabling code
which was presumably placed there by aliens. There's no valid reason for
the barrier and one can only suspect that it's up to no good.

This patch removes it before it has a chance to spread.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23 11:35:51 +01:00
Will Deacon
f0d1bc4795 ARM: pmu: remove unused reservation mechanism
The PMU reservation mechanism was originally intended to allow OProfile
and perf-events to co-ordinate over access to the CPU PMU. Since then,
OProfile for ARM has moved to using perf as its backend, so the
reservation code is no longer used.

This patch removes the reservation code for the CPU PMU on ARM.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23 11:35:51 +01:00
Will Deacon
50243efde0 ARM: perf: add devicetree bindings for 11MPcore, A5, A7 and A15 PMUs
This patch adds separate devicetree bindings for 11MPcore and
Cortex-{A5,A7,A15} PMUs in preparation for improved devicetree parsing
in the ARM perf-event CPU PMU driver.

Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23 11:35:51 +01:00
Jon Hunter
7be2958e97 ARM: PMU: Add runtime PM Support
Add runtime PM support to the ARM PMU driver so that devices such as OMAP
supporting dynamic PM can use the platform->runtime_* hooks to initialise
hardware at runtime. Without having these runtime PM hooks in place any
configuration of the PMU hardware would be lost when low power states are
entered and hence would prevent PMU from working.

This change also replaces the PMU platform functions enable_irq and disable_irq
added by Ming Lei with runtime_resume and runtime_suspend funtions. Ming had
added the enable_irq and disable_irq functions as a method to configure the
cross trigger interface on OMAP4 for routing the PMU interrupts. By adding
runtime PM support, we can move the code called by enable_irq and disable_irq
into the runtime PM callbacks runtime_resume and runtime_suspend.

Cc: Ming Lei <ming.lei@canonical.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23 11:35:51 +01:00
Russell King
91b006def3 Merge branches 'audit', 'delay', 'fixes', 'misc' and 'sta2x11' into for-linus 2012-07-27 23:06:32 +01:00
Will Deacon
4295b898f5 ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration
In order to provide PMU name strings compatible with the OProfile
user ABI, an enumeration of all PMUs is currently used by perf to
identify each PMU uniquely. Unfortunately, this does not scale well
in the presence of multiple PMUs and creates a single, global namespace
across all PMUs in the system.

This patch removes the enumeration and instead uses the name string
for the PMU to map onto the OProfile variant. perf_pmu_name is
implemented for CPU PMUs, which is all that OProfile cares about anyway.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-09 17:41:10 +01:00
Will Deacon
fdeb8e35fd ARM: 7441/1: perf: return -EOPNOTSUPP if requested mode exclusion is unavailable
We currently return -EPERM if the user requests mode exclusion that is
not supported by the CPU. This looks pretty confusing from userspace
and is inconsistent with other architectures (ppc, x86).

This patch returns -EOPNOTSUPP instead.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05 09:50:56 +01:00
Linus Torvalds
12679a2d7e Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull more ARM updates from Russell King.

This got a fair number of conflicts with the <asm/system.h> split, but
also with some other sparse-irq and header file include cleanups.  They
all looked pretty trivial, though.

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (59 commits)
  ARM: fix Kconfig warning for HAVE_BPF_JIT
  ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds
  ARM: 7349/1: integrator: convert to sparse irqs
  ARM: 7259/3: net: JIT compiler for packet filters
  ARM: 7334/1: add jump label support
  ARM: 7333/2: jump label: detect %c support for ARM
  ARM: 7338/1: add support for early console output via semihosting
  ARM: use set_current_blocked() and block_sigmask()
  ARM: exec: remove redundant set_fs(USER_DS)
  ARM: 7332/1: extract out code patch function from kprobes
  ARM: 7331/1: extract out insn generation code from ftrace
  ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format
  ARM: 7351/1: ftrace: remove useless memory checks
  ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path
  ARM: Versatile Express: add NO_IOPORT
  ARM: get rid of asm/irq.h in asm/prom.h
  ARM: 7319/1: Print debug info for SIGBUS in user faults
  ARM: 7318/1: gic: refactor irq_start assignment
  ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop
  ARM: 7315/1: perf: add support for the Cortex-A7 PMU
  ...
2012-03-29 16:53:48 -07:00
Will Deacon
d33c88c659 ARM: 7315/1: perf: add support for the Cortex-A7 PMU
Cortex-A7 implements an ARMv7-compatible PMU compliant with the PMUv2
architecture specification.

This patch adds support for the PMU to the ARM perf backend.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-24 09:38:53 +00:00
Ingo Molnar
bea95c152d Merge branch 'perf/hw-branch-sampling' into perf/core
Merge reason: The 'perf record -b' hardware branch sampling feature is ready for upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12 20:47:05 +01:00
Lorenzo Pieralisi
a0feb6db0f ARM: 7358/1: perf: add PMU hotplug notifier
When a CPU is taken out of reset, either cold booted or hotplugged in,
some of its PMU registers can contain UNKNOWN values.

This patch adds a hotplug notifier to ARM core perf code so that upon
CPU restart the PMU unit is reset and becomes ready to use again.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-07 09:40:50 +00:00
Will Deacon
5727347180 ARM: 7354/1: perf: limit sample_period to half max_period in non-sampling mode
On ARM, the PMU does not stop counting after an overflow and therefore
IRQ latency affects the new counter value read by the kernel. This is
significant for non-sampling runs where it is possible for the new value
to overtake the previous one, causing the delta to be out by up to
max_period events.

Commit a737823d ("ARM: 6835/1: perf: ensure overflows aren't missed due
to IRQ latency") attempted to fix this problem by allowing interrupt
handlers to pass an overflow flag to the event update function, causing
the overflow calculation to assume that the counter passed through zero
when going from prev to new. Unfortunately, this doesn't work when
overflow occurs on the perf_task_tick path because we have the flag
cleared and end up computing a large negative delta.

This patch removes the overflow flag from armpmu_event_update and
instead limits the sample_period to half of the max_period for
non-sampling profiling runs.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-07 09:40:48 +00:00
Stephane Eranian
2481c5fa6d perf: Disable PERF_SAMPLE_BRANCH_* when not supported
PERF_SAMPLE_BRANCH_* is disabled for:

 - SW events (sw counters, tracepoints)
 - HW breakpoints
 - ALL but Intel x86 architecture
 - AMD64 processors

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328826068-11713-10-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-05 14:55:42 +01:00
Russell King
2e0e943436 Merge branch 'devel-stable' into for-linus
Conflicts:
	arch/arm/kernel/setup.c
	arch/arm/mach-shmobile/board-kota2.c
2012-01-05 13:24:33 +00:00
Will Deacon
6bd054096d ARM: 7185/1: perf: don't assign platform_device on unsupported CPUs
In the unlikely case that a platform registers a PMU platform_device
when running on a CPU that is unsupported by perf, we will encounter a
NULL dereference when trying to assign the platform_device to the
cpu_pmu structure.

This patch checks that the CPU is supported by perf before assigning
the platform_device.

Reported-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-06 12:48:01 +00:00
Linus Torvalds
232ea34455 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix loss of notification with multi-event
  perf, x86: Force IBS LVT offset assignment for family 10h
  perf, x86: Disable PEBS on SandyBridge chips
  trace_events_filter: Use rcu_assign_pointer() when setting ftrace_event_call->filter
  perf session: Fix crash with invalid CPU list
  perf python: Fix undefined symbol problem
  perf/x86: Enable raw event access to Intel offcore events
  perf: Don't use -ENOSPC for out of PMU resources
  perf: Do not set task_ctx pointer in cpuctx if there are no events in the context
  perf/x86: Fix PEBS instruction unwind
  oprofile, x86: Fix crash when unloading module (nmi timer mode)
  oprofile: Fix crash when unloading module (hr timer mode)
2011-12-05 16:54:00 -08:00
Will Deacon
ae72fd588a Merge branches 'perf/event-nos', 'perf/updates' and 'perf/omap4' into for-rmk 2011-12-02 15:22:18 +00:00
Ming Lei
e0516a64e7 arm: pmu: allow platform specific irq enable/disable handling
This patch introduces .enable_irq and .disable_irq into
struct arm_pmu_platdata, so platform specific irq enablement
can be handled after request_irq, and platform specific irq
disablement can be handled before free_irq.

This patch is for support of  pmu irq routed from CTI on omap4.

Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-12-02 15:16:33 +00:00
Will Deacon
feb45d06ff ARM: perf: remove unused armpmu_get_max_events
armpmu_get_max_events is only called from perf_num_counters, so we can
inline it there. It existed as a separate entity as a hangover from
the original perf-based oprofile implementation.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-12-02 15:16:25 +00:00
Will Deacon
e5a2132764 ARM: perf: check that we have a platform device when reserving PMU
Attempting to use a hardware counter on a platform with a supported PMU
but where the platform_device (defining the interrupts) has not been
registered results in a NULL pointer dereference.

This patch fixes the problem by checking that we actually have a platform
device registered before attempting to grab the interrupts.

Reported-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-11-22 18:01:46 +00:00
Will Deacon
bce34d1442 ARM: perf: initialise used_mask for fake PMU during validation
When validating an event group, we call pmu->get_event_idx for each
group member in order to check that the group can be scheduled as a
unit on an empty PMU.

As a result of 3fc2c830 ("ARM: perf: remove event limit from
pmu_hw_events"), the used_mask member of struct cpu_hw_events must be
setup explicitly, something which we don't do for the fake cpu_hw_events
used for validation.

This patch sets up an empty used_mask for the fake validation
cpu_hw_events, preventing NULL deferences when trying to get the event
index.

Reported-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-11-17 15:20:03 +00:00
Peter Zijlstra
aa2bc1ade5 perf: Don't use -ENOSPC for out of PMU resources
People (Linus) objected to using -ENOSPC to signal not having enough
resources on the PMU to satisfy the request. Use -EINVAL.

Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-xv8geaz2zpbjhlx0svmpp28n@git.kernel.org
[ merged to newer kernel, fixed up MIPS impact ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-14 13:01:24 +01:00
Paul Gortmaker
ecea4ab6d3 arm: convert core files from module.h to export.h
Many of the core ARM kernel files are not modules, but just
including module.h for exporting symbols.  Now these files can
use the lighter footprint export.h for this role.

There are probably lots more, but ARM files of mach-* and plat-*
don't get coverage via a simple yesconfig build.  They will have
to be cleaned up and tested via using their respective configs.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:49 -04:00
Mark Rutland
7325eaec43 ARM: perf: Remove unnecessary armpmu->enable()s
Currently, armpmu_enable iterates through the events for a given
counter set, calling armpmu->enable on each before calling
armpmu->start to start the PMU's counters.

As armpmu->enable is called when each event is added, each event is
already configured in hardware. Due to this, calling armpmu->enable
in armpmu_enable is unnecessary and confusing.

This patch removes the unnecessary calls to armpmu->enable.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:50:13 +01:00
Mark Rutland
0ce47080df ARM: perf: move arm_pmu into <asm/pmu.h>
Currently, struct arm_pmu and related functions are only visible to
{,arch/arm/}/kernel/perf_event.c. This prevents new drivers from using
the framework.

This patch  moves declarations to asm/pmu.h, allowing new PMU drivers
to use the framework.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:50:13 +01:00
Mark Rutland
8be3f9a238 ARM: perf: remove cpu-related misnomers
Currently struct cpu_hw_events stores data on events running on a
PMU associated with a CPU. As this data is general enough to be used
for system PMUs, this name is a misnomer, and may cause confusion when
it is used for system PMUs.

Additionally, 'armpmu' is commonly used as a parameter name for an
instance of struct arm_pmu. The name is also used for a global instance
which represents the CPU's PMU.

As cpu_hw_events is now not tied to CPU PMUs, it is renamed to
pmu_hw_events, with instances of it renamed similarly. As the global
'armpmu' is CPU-specfic, it is renamed to cpu_pmu. This should make it
clearer which code is generic, and which is coupled with the CPU.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:50:12 +01:00
Mark Rutland
3fc2c83087 ARM: perf: remove event limit from pmu_hw_events
Currently the event accounting data in pmu_hw_events is stored in
fixed-sized arrays within the structure.

This patch refactors the accounting data to allow any number of events
to be managed.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:50:11 +01:00
Mark Rutland
8a16b34e21 ARM: perf: add support for multiple PMUs
Currently, a single static instance of struct pmu is used when
registering an ARM PMU with the main perf subsystem. This limits
the ARM perf code to supporting a single PMU.

This patch replaces the static struct pmu instance with a member
variable on struct arm_pmu. This provides bidirectional mapping
between the two structs, and therefore allows for support of multiple
PMUs. The function 'to_arm_pmu' is provided for convenience.

PMU-generic functions are also updated to use the new mapping, and
PMU-generic initialisation of the member variables is moved into a new
function: armpmu_init.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:50:10 +01:00
Mark Rutland
e1f431b57e ARM: perf: refactor event mapping
Currently mapping an event type to a hardware configuration value
depends on the data being pointed to from struct arm_pmu. These fields
(cache_map, event_map, raw_event_mask) are currently specific to CPU
PMUs, and do not serve the general case well.

This patch replaces the event map pointers on struct arm_pmu with a new
'map_event' function pointer. Small shim functions are used to reuse
the existing common code.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:50:09 +01:00
Mark Rutland
7ae18a5717 ARM: perf: add type field to struct arm_pmu
Currently, the ARM perf code assumes all PMUs it will handle are
CPU PMUs, having ARM_PMU_DEVICE_CPU hardcoded when reserving or
releasing hardware. This means that currently, the ARM perf code can't
support system PMUs.

This patch adds a 'type' field to struct arm_pmu, which allows the code
to reserve & release the hardware regardless of the PMU type.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:50:08 +01:00
Mark Rutland
0f78d2d5cc ARM: perf: lock PMU registers per-CPU
Currently, a single lock serialises access to CPU PMU registers. This
global locking is unnecessary as PMU registers are local to the CPU
they monitor.

This patch replaces the global lock with a per-CPU lock. As the lock is
in struct cpu_hw_events, PMUs providing a single cpu_hw_events instance
can be locked globally.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:50:07 +01:00
Mark Rutland
1b69beb768 ARM: perf: remove unnecessary armpmu->stop
As armpmu_disable will call armpmu->stop when the last event has been
removed, this is pointless and simply adds to the noise when debugging.
Additionally, due to this call occurring in a preemptible context, this
is problematic for per-cpu locking of PMU registers (where we will
attempt to access per-cpu spinlock for use with raw_spin_lock_irqsave).

This patch removes the call to armpmu->stop.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:50:06 +01:00
Mark Rutland
92f701e1f4 ARM: perf: indirect access to cpu_hw_events
Currently, cpu_hw_events is a global per-CPU variable. To enable
support for multiple PMUs, there needs to be a mapping from an instance
of arm_pmu to its cpu_hw_events. Additionally, as system PMUs are not
CPU-affine, they should not have this stored per-CPU.

This patch moves access to the hardware events data behind an accessor
function (arm_pmu::get_hw_events). This allows each instance to have
its own hardware event data, which can be stored per-CPU or globally as
required.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:50:05 +01:00
Mark Rutland
a9356a04fa ARM: perf: move platform device to struct arm_pmu
Currently the ARM perf code supports having a single struct
platform_device to supply IRQ numbers, limiting it to supporting a
single PMU.

This patch makes a platform_device instance variable on struct arm_pmu.
This should allow for multiple PMUs to be supported in future.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:50:04 +01:00
Mark Rutland
03b7898d30 ARM: perf: move active_events into struct arm_pmu
This patch moves the active_events counter into struct arm_pmu, in
preparation for supporting multiple PMUs. This also moves
pmu_reserve_mutex, as it is used to guard accesses to active_events.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:50:03 +01:00