a3cb15cda1
3806 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ard Biesheuvel
|
9443076e43 |
ARM: p2v: reduce p2v alignment requirement to 2 MiB
The ARM kernel's linear map starts at PAGE_OFFSET, which maps to a physical address (PHYS_OFFSET) that is platform specific, and is discovered at boot. Since we don't want to slow down translations between physical and virtual addresses by keeping the offset in a variable in memory, we implement this by patching the code performing the translation, and putting the offset between PAGE_OFFSET and the start of physical RAM directly into the instruction opcodes. As we only patch up to 8 bits of offset, yielding 4 GiB >> 8 == 16 MiB of granularity, we have to round up PHYS_OFFSET to the next multiple if the start of physical RAM is not a multiple of 16 MiB. This wastes some physical RAM, since the memory that was skipped will now live below PAGE_OFFSET, making it inaccessible to the kernel. We can improve this by changing the patchable sequences and the patching logic to carry more bits of offset: 11 bits gives us 4 GiB >> 11 == 2 MiB of granularity, and so we will never waste more than that amount by rounding up the physical start of DRAM to the next multiple of 2 MiB. (Note that 2 MiB granularity guarantees that the linear mapping can be created efficiently, whereas less than 2 MiB may result in the linear mapping needing another level of page tables) This helps Zhen Lei's scenario, where the start of DRAM is known to be occupied. It also helps EFI boot, which relies on the firmware's page allocator to allocate space for the decompressed kernel as low as possible. And if the KASLR patches ever land for 32-bit, it will give us 3 more bits of randomization of the placement of the kernel inside the linear region. For the ARM code path, it simply comes down to using two add/sub instructions instead of one for the carryless version, and patching each of them with the correct immediate depending on the rotation field. For the LPAE calculation, which has to deal with a carry, it patches the MOVW instruction with up to 12 bits of offset (but we only need 11 bits anyway) For the Thumb2 code path, patching more than 11 bits of displacement would be somewhat cumbersome, but the 11 bits we need fit nicely into the second word of the u16[2] opcode, so we simply update the immediate assignment and the left shift to create an addend of the right magnitude. Suggested-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
e8e00f5afb |
ARM: p2v: switch to MOVW for Thumb2 and ARM/LPAE
In preparation for reducing the phys-to-virt minimum relative alignment from 16 MiB to 2 MiB, switch to patchable sequences involving MOVW instructions that can more easily be manipulated to carry a 12-bit immediate. Note that the non-LPAE ARM sequence is not updated: MOVW may not be supported on non-LPAE platforms, and the sequence itself can be updated more easily to apply the 12 bits of displacement. For Thumb2, which has many more versions of opcodes, switch to a sequence that can be patched by the same patching code for both versions. Note that the Thumb2 opcodes for MOVW and MVN are unambiguous, and have no rotation bits in their immediate fields, so there is no need to use placeholder constants in the asm blocks. While at it, drop the 'volatile' qualifiers from the asm blocks: the code does not have any side effects that are invisible to the compiler, so it is free to omit these sequences if the outputs are not used. Suggested-by: Russell King <linux@armlinux.org.uk> Acked-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
2730e8eaa4 |
ARM: p2v: use relative references in patch site arrays
Free up a register in the p2v patching code by switching to relative references, which don't require keeping the phys-to-virt displacement live in a register. Acked-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
0869f3b9da |
ARM: p2v: drop redundant 'type' argument from __pv_stub
We always pass the same value for 'type' so pull it into the __pv_stub macro itself. Acked-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
22f2d23098 |
ARM: module: add support for place relative relocations
When using the new adr_l/ldr_l/str_l macros to refer to external symbols from modules, the linker may emit place relative ELF relocations that need to be fixed up by the module loader. So add support for these. Reviewed-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Ard Biesheuvel
|
0b1674638a |
ARM: assembler: introduce adr_l, ldr_l and str_l macros
Like arm64, ARM supports position independent code sequences that
produce symbol references with a greater reach than the ordinary
adr/ldr instructions. Since on ARM, the adrl pseudo-instruction is
only supported in ARM mode (and not at all when using Clang), having
a adr_l macro like we do on arm64 is useful, and increases symmetry
as well.
Currently, we use open coded instruction sequences involving literals
and arithmetic operations. Instead, we can use movw/movt pairs on v7
CPUs, circumventing the D-cache entirely.
E.g., on v7+ CPUs, we can emit a PC-relative reference as follows:
movw <reg>, #:lower16:<sym> - (1f + 8)
movt <reg>, #:upper16:<sym> - (1f + 8)
1: add <reg>, <reg>, pc
For older CPUs, we can emit the literal into a subsection, allowing it
to be emitted out of line while retaining the ability to perform
arithmetic on label offsets.
E.g., on pre-v7 CPUs, we can emit a PC-relative reference as follows:
ldr <reg>, 2f
1: add <reg>, <reg>, pc
.subsection 1
2: .long <sym> - (1b + 8)
.previous
This is allowed by the assembler because, unlike ordinary sections,
subsections are combined into a single section in the object file, and
so the label references are not true cross-section references that are
visible as relocations. (Subsections have been available in binutils
since 2004 at least, so they should not cause any issues with older
toolchains.)
So use the above to implement the macros mov_l, adr_l, ldr_l and str_l,
all of which will use movw/movt pairs on v7 and later CPUs, and use
PC-relative literals otherwise.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
||
|
Ard Biesheuvel
|
fc2933c133 |
ARM: 9020/1: mm: use correct section size macro to describe the FDT virtual address
Commit
149a3ffe62b9dbc3 ("9012/1: move device tree mapping out of linear region")
created a permanent, read-only section mapping of the device tree blob
provided by the firmware, and added a set of macros to get the base and
size of the virtually mapped FDT based on the physical address. However,
while the mapping code uses the SECTION_SIZE macro correctly, the macros
use PMD_SIZE instead, which means something entirely different on ARM when
using short descriptors, and is therefore not the right quantity to use
here. So replace PMD_SIZE with SECTION_SIZE. While at it, change the names
of the macro and its parameter to clarify that it returns the virtual
address of the start of the FDT, based on the physical address in memory.
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
||
Andrew Jeffery
|
9fa2e7af3d |
ARM: 9019/1: kprobes: Avoid fortify_panic() when copying optprobe template
Setting both CONFIG_KPROBES=y and CONFIG_FORTIFY_SOURCE=y on ARM leads to a panic in memcpy() when injecting a kprobe despite the fixes found in commit |
||
Linus Walleij
|
5615f69bc2 |
ARM: 9016/2: Initialize the mapping of KASan shadow memory
This patch initializes KASan shadow region's page table and memory.
There are two stage for KASan initializing:
1. At early boot stage the whole shadow region is mapped to just
one physical page (kasan_zero_page). It is finished by the function
kasan_early_init which is called by __mmap_switched(arch/arm/kernel/
head-common.S)
2. After the calling of paging_init, we use kasan_zero_page as zero
shadow for some memory that KASan does not need to track, and we
allocate a new shadow space for the other memory that KASan need to
track. These issues are finished by the function kasan_init which is
call by setup_arch.
When using KASan we also need to increase the THREAD_SIZE_ORDER
from 1 to 2 as the extra calls for shadow memory uses quite a bit
of stack.
As we need to make a temporary copy of the PGD when setting up
shadow memory we create a helpful PGD_SIZE definition for both
LPAE and non-LPAE setups.
The KASan core code unconditionally calls pud_populate() so this
needs to be changed from BUG() to do {} while (0) when building
with KASan enabled.
After the initial development by Andre Ryabinin several modifications
have been made to this code:
Abbott Liu <liuwenliang@huawei.com>
- Add support ARM LPAE: If LPAE is enabled, KASan shadow region's
mapping table need be copied in the pgd_alloc() function.
- Change kasan_pte_populate,kasan_pmd_populate,kasan_pud_populate,
kasan_pgd_populate from .meminit.text section to .init.text section.
Reported by Florian Fainelli <f.fainelli@gmail.com>
Linus Walleij <linus.walleij@linaro.org>:
- Drop the custom mainpulation of TTBR0 and just use
cpu_switch_mm() to switch the pgd table.
- Adopt to handle 4th level page tabel folding.
- Rewrite the entire page directory and page entry initialization
sequence to be recursive based on ARM64:s kasan_init.c.
Ard Biesheuvel <ardb@kernel.org>:
- Necessary underlying fixes.
- Crucial bug fixes to the memory set-up code.
Co-developed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Co-developed-by: Abbott Liu <liuwenliang@huawei.com>
Co-developed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G
Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q
Reported-by: Russell King - ARM Linux <rmk+kernel@armlinux.org.uk>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Abbott Liu <liuwenliang@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
||
|
Linus Walleij
|
c12366ba44 |
ARM: 9015/2: Define the virtual space of KASan's shadow region
Define KASAN_SHADOW_OFFSET,KASAN_SHADOW_START and KASAN_SHADOW_END for
the Arm kernel address sanitizer. We are "stealing" lowmem (the 4GB
addressable by a 32bit architecture) out of the virtual address
space to use as shadow memory for KASan as follows:
+----+ 0xffffffff
| |
| | |-> Static kernel image (vmlinux) BSS and page table
| |/
+----+ PAGE_OFFSET
| |
| | |-> Loadable kernel modules virtual address space area
| |/
+----+ MODULES_VADDR = KASAN_SHADOW_END
| |
| | |-> The shadow area of kernel virtual address.
| |/
+----+-> TASK_SIZE (start of kernel space) = KASAN_SHADOW_START the
| | shadow address of MODULES_VADDR
| | |
| | |
| | |-> The user space area in lowmem. The kernel address
| | | sanitizer do not use this space, nor does it map it.
| | |
| | |
| | |
| | |
| |/
------ 0
0 .. TASK_SIZE is the memory that can be used by shared
userspace/kernelspace. It us used for userspace processes and for
passing parameters and memory buffers in system calls etc. We do not
need to shadow this area.
KASAN_SHADOW_START:
This value begins with the MODULE_VADDR's shadow address. It is the
start of kernel virtual space. Since we have modules to load, we need
to cover also that area with shadow memory so we can find memory
bugs in modules.
KASAN_SHADOW_END
This value is the 0x100000000's shadow address: the mapping that would
be after the end of the kernel memory at 0xffffffff. It is the end of
kernel address sanitizer shadow area. It is also the start of the
module area.
KASAN_SHADOW_OFFSET:
This value is used to map an address to the corresponding shadow
address by the following formula:
shadow_addr = (address >> 3) + KASAN_SHADOW_OFFSET;
As you would expect, >> 3 is equal to dividing by 8, meaning each
byte in the shadow memory covers 8 bytes of kernel memory, so one
bit shadow memory per byte of kernel memory is used.
The KASAN_SHADOW_OFFSET is provided in a Kconfig option depending
on the VMSPLIT layout of the system: the kernel and userspace can
split up lowmem in different ways according to needs, so we calculate
the shadow offset depending on this.
When kasan is enabled, the definition of TASK_SIZE is not an 8-bit
rotated constant, so we need to modify the TASK_SIZE access code in the
*.s file.
The kernel and modules may use different amounts of memory,
according to the VMSPLIT configuration, which in turn
determines the PAGE_OFFSET.
We use the following KASAN_SHADOW_OFFSETs depending on how the
virtual memory is split up:
- 0x1f000000 if we have 1G userspace / 3G kernelspace split:
- The kernel address space is 3G (0xc0000000)
- PAGE_OFFSET is then set to 0x40000000 so the kernel static
image (vmlinux) uses addresses 0x40000000 .. 0xffffffff
- On top of that we have the MODULES_VADDR which under
the worst case (using ARM instructions) is
PAGE_OFFSET - 16M (0x01000000) = 0x3f000000
so the modules use addresses 0x3f000000 .. 0x3fffffff
- So the addresses 0x3f000000 .. 0xffffffff need to be
covered with shadow memory. That is 0xc1000000 bytes
of memory.
- 1/8 of that is needed for its shadow memory, so
0x18200000 bytes of shadow memory is needed. We
"steal" that from the remaining lowmem.
- The KASAN_SHADOW_START becomes 0x26e00000, to
KASAN_SHADOW_END at 0x3effffff.
- Now we can calculate the KASAN_SHADOW_OFFSET for any
kernel address as 0x3f000000 needs to map to the first
byte of shadow memory and 0xffffffff needs to map to
the last byte of shadow memory. Since:
SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
0x26e00000 = (0x3f000000 >> 3) + KASAN_SHADOW_OFFSET
KASAN_SHADOW_OFFSET = 0x26e00000 - (0x3f000000 >> 3)
KASAN_SHADOW_OFFSET = 0x26e00000 - 0x07e00000
KASAN_SHADOW_OFFSET = 0x1f000000
- 0x5f000000 if we have 2G userspace / 2G kernelspace split:
- The kernel space is 2G (0x80000000)
- PAGE_OFFSET is set to 0x80000000 so the kernel static
image uses 0x80000000 .. 0xffffffff.
- On top of that we have the MODULES_VADDR which under
the worst case (using ARM instructions) is
PAGE_OFFSET - 16M (0x01000000) = 0x7f000000
so the modules use addresses 0x7f000000 .. 0x7fffffff
- So the addresses 0x7f000000 .. 0xffffffff need to be
covered with shadow memory. That is 0x81000000 bytes
of memory.
- 1/8 of that is needed for its shadow memory, so
0x10200000 bytes of shadow memory is needed. We
"steal" that from the remaining lowmem.
- The KASAN_SHADOW_START becomes 0x6ee00000, to
KASAN_SHADOW_END at 0x7effffff.
- Now we can calculate the KASAN_SHADOW_OFFSET for any
kernel address as 0x7f000000 needs to map to the first
byte of shadow memory and 0xffffffff needs to map to
the last byte of shadow memory. Since:
SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
0x6ee00000 = (0x7f000000 >> 3) + KASAN_SHADOW_OFFSET
KASAN_SHADOW_OFFSET = 0x6ee00000 - (0x7f000000 >> 3)
KASAN_SHADOW_OFFSET = 0x6ee00000 - 0x0fe00000
KASAN_SHADOW_OFFSET = 0x5f000000
- 0x9f000000 if we have 3G userspace / 1G kernelspace split,
and this is the default split for ARM:
- The kernel address space is 1GB (0x40000000)
- PAGE_OFFSET is set to 0xc0000000 so the kernel static
image uses 0xc0000000 .. 0xffffffff.
- On top of that we have the MODULES_VADDR which under
the worst case (using ARM instructions) is
PAGE_OFFSET - 16M (0x01000000) = 0xbf000000
so the modules use addresses 0xbf000000 .. 0xbfffffff
- So the addresses 0xbf000000 .. 0xffffffff need to be
covered with shadow memory. That is 0x41000000 bytes
of memory.
- 1/8 of that is needed for its shadow memory, so
0x08200000 bytes of shadow memory is needed. We
"steal" that from the remaining lowmem.
- The KASAN_SHADOW_START becomes 0xb6e00000, to
KASAN_SHADOW_END at 0xbfffffff.
- Now we can calculate the KASAN_SHADOW_OFFSET for any
kernel address as 0xbf000000 needs to map to the first
byte of shadow memory and 0xffffffff needs to map to
the last byte of shadow memory. Since:
SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
0xb6e00000 = (0xbf000000 >> 3) + KASAN_SHADOW_OFFSET
KASAN_SHADOW_OFFSET = 0xb6e00000 - (0xbf000000 >> 3)
KASAN_SHADOW_OFFSET = 0xb6e00000 - 0x17e00000
KASAN_SHADOW_OFFSET = 0x9f000000
- 0x8f000000 if we have 3G userspace / 1G kernelspace with
full 1 GB low memory (VMSPLIT_3G_OPT):
- The kernel address space is 1GB (0x40000000)
- PAGE_OFFSET is set to 0xb0000000 so the kernel static
image uses 0xb0000000 .. 0xffffffff.
- On top of that we have the MODULES_VADDR which under
the worst case (using ARM instructions) is
PAGE_OFFSET - 16M (0x01000000) = 0xaf000000
so the modules use addresses 0xaf000000 .. 0xaffffff
- So the addresses 0xaf000000 .. 0xffffffff need to be
covered with shadow memory. That is 0x51000000 bytes
of memory.
- 1/8 of that is needed for its shadow memory, so
0x0a200000 bytes of shadow memory is needed. We
"steal" that from the remaining lowmem.
- The KASAN_SHADOW_START becomes 0xa4e00000, to
KASAN_SHADOW_END at 0xaeffffff.
- Now we can calculate the KASAN_SHADOW_OFFSET for any
kernel address as 0xaf000000 needs to map to the first
byte of shadow memory and 0xffffffff needs to map to
the last byte of shadow memory. Since:
SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
0xa4e00000 = (0xaf000000 >> 3) + KASAN_SHADOW_OFFSET
KASAN_SHADOW_OFFSET = 0xa4e00000 - (0xaf000000 >> 3)
KASAN_SHADOW_OFFSET = 0xa4e00000 - 0x15e00000
KASAN_SHADOW_OFFSET = 0x8f000000
- The default value of 0xffffffff for KASAN_SHADOW_OFFSET
is an error value. We should always match one of the
above shadow offsets.
When we do this, TASK_SIZE will sometimes get a bit odd values
that will not fit into immediate mov assembly instructions.
To account for this, we need to rewrite some assembly using
TASK_SIZE like this:
- mov r1, #TASK_SIZE
+ ldr r1, =TASK_SIZE
or
- cmp r4, #TASK_SIZE
+ ldr r0, =TASK_SIZE
+ cmp r4, r0
this is done to avoid the immediate #TASK_SIZE that need to
fit into a limited number of bits.
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G
Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Abbott Liu <liuwenliang@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
||
|
Linus Walleij
|
d6d51a96c7 |
ARM: 9014/2: Replace string mem* functions for KASan
Functions like memset()/memmove()/memcpy() do a lot of memory accesses. If a bad pointer is passed to one of these functions it is important to catch this. Compiler instrumentation cannot do this since these functions are written in assembly. KASan replaces these memory functions with instrumented variants. The original functions are declared as weak symbols so that the strong definitions in mm/kasan/kasan.c can replace them. The original functions have aliases with a '__' prefix in their name, so we can call the non-instrumented variant if needed. We must use __memcpy()/__memset() in place of memcpy()/memset() when we copy .data to RAM and when we clear .bss, because kasan_early_init cannot be called before the initialization of .data and .bss. For the kernel compression and EFI libstub's custom string libraries we need a special quirk: even if these are built without KASan enabled, they rely on the global headers for their custom string libraries, which means that e.g. memcpy() will be defined to __memcpy() and we get link failures. Since these implementations are written i C rather than assembly we use e.g. __alias(memcpy) to redirected any users back to the local implementation. Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: kasan-dev@googlegroups.com Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q Reported-by: Russell King - ARM Linux <rmk+kernel@armlinux.org.uk> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Abbott Liu <liuwenliang@huawei.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Ard Biesheuvel
|
7a1be318f5 |
ARM: 9012/1: move device tree mapping out of linear region
On ARM, setting up the linear region is tricky, given the constraints around placement and alignment of the memblocks, and how the kernel itself as well as the DT are placed in physical memory. Let's simplify matters a bit, by moving the device tree mapping to the top of the address space, right between the end of the vmalloc region and the start of the the fixmap region, and create a read-only mapping for it that is independent of the size of the linear region, and how it is organized. Since this region was formerly used as a guard region, which will now be populated fully on LPAE builds by this read-only mapping (which will still be able to function as a guard region for stray writes), bump the start of the [underutilized] fixmap region by 512 KB as well, to ensure that there is always a proper guard region here. Doing so still leaves ample room for the fixmap space, even with NR_CPUS set to its maximum value of 32. Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Ard Biesheuvel
|
e9a2f8b599 |
ARM: 9011/1: centralize phys-to-virt conversion of DT/ATAGS address
Before moving the DT mapping out of the linear region, let's prepare for this change by removing all the phys-to-virt translations of the __atags_pointer variable, and perform this translation only once at setup time. Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
Nicholas Piggin
|
292f70d7cd |
arm: use asm-generic/mmu_context.h for no-op implementations
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Al Viro
|
1510723087 |
arm: kill dump_task_regs()
the last user had been fdpic Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
Joe Perches
|
33def8498f |
treewide: Convert macro and uses of __section(foo) to __section("foo")
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Linus Torvalds
|
e731f3146f |
ARM: SoC platform updates
SoC changes, a substantial part of this is cleanup of some of the older
platforms that used to have a bunch of board files. In particular:
- Removal of non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP platforms,
moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
THere are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones re:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP
-----BEGIN PGP SIGNATURE-----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=0+Ee
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
|
||
|
Linus Torvalds
|
746b25b1aa |
Kbuild updates for v5.10
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the module
linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=tZRN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
|
||
|
Linus Torvalds
|
00937f36b0 |
pci-v5.10-changes
-----BEGIN PGP SIGNATURE-----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=RCFo
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
Liu)
- Add schedule point in pci_read_config() to reduce max latency
(Jiang Biao)
- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)
Resource management:
- Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
Pieralisi)
PCIe native device hotplug:
- Reduce noisiness on hot removal (Lukas Wunner)
Power management:
- Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
that was done on the basis of spec typo (Bjorn Helgaas)
- Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
ambiguity (Krzysztof Wilczyński)
- Remove unused pcibios_pm_ops (Vaibhav Gupta)
IOMMU:
- Enable Translation Blocking for external devices to harden against
DMA attacks (Rajat Jain)
Error handling:
- Add an ACPI APEI notifier chain for vendor CPER records to enable
device-specific error handling (Shiju Jose)
ASPM:
- Remove struct aspm_register_info to simplify code (Saheed O.
Bolarinwa)
Amlogic Meson PCIe controller driver:
- Build as module by default (Kevin Hilman)
Ampere Altra PCIe controller driver:
- Add MCFG quirk to work around non-standard ECAM implementation
(Tuan Phan)
Broadcom iProc PCIe controller driver:
- Set affinity mask on MSI interrupts (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
- Add DT bindings for more Brcmstb chips (Jim Quinlan)
- Add bcm7278 register info (Jim Quinlan)
- Add bcm7278 PERST# support (Jim Quinlan)
- Add suspend and resume pm_ops (Jim Quinlan)
- Add control of rescal reset (Jim Quinlan)
- Set additional internal memory DMA viewport sizes (Jim Quinlan)
- Accommodate MSI for older chips (Jim Quinlan)
- Set bus max burst size by chip type (Jim Quinlan)
- Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Use dev_err_probe() to reduce redundant messages (Anson Huang)
Freescale Layerscape PCIe controller driver:
- Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
- Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint test support for lS1088a (Xiaowei Bao)
- Add MSI-X support for ls1088a (Xiaowei Bao)
HiSilicon HIP PCIe controller driver:
- Handle HIP-specific errors via ACPI APEI (Yicong Yang)
HiSilicon Kirin PCIe controller driver:
- Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)
Intel VMD host bridge driver:
- Factor out physical offset, bus offset, IRQ domain, IRQ allocation
(Jon Derrick)
- Use generic PCI PM correctly (Jon Derrick)
Marvell Aardvark PCIe controller driver:
- Fix compilation on s390 (Pali Rohár)
- Implement driver 'remove' function and allow to build it as module
(Pali Rohár)
- Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
- Convert mvebu a3700 internal SMCC firmware return codes to errno
(Pali Rohár)
- Fix initialization with old Marvell's Arm Trusted Firmware (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix hibernation in case interrupts are not re-created (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Stop checking return value of debugfs_create() functions (Greg
Kroah-Hartman)
- Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)
Qualcomm PCIe controller driver:
- Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)
Renesas R-Car PCIe controller driver:
- Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
(Lad Prabhakar)
- Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
- Add DT support for r8a7742 (Lad Prabhakar)
Socionext UniPhier Pro5 controller driver:
- Add DT descriptions of iATU register (host and endpoint) (Kunihiko
Hayashi)
Synopsys DesignWare PCIe controller driver:
- Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
unavoidable) (Hou Zhiqiang)
- Fix endpoint Header Type check so multi-function devices work (Hou
Zhiqiang)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Stop leaking MSI page in suspend/resume (Jisheng Zhang)
- Add common iATU register support instead of keystone-specific code
(Kunihiko Hayashi)
- Major config space access and other cleanups in dwc core and
drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
kirin, meson, qcom, tegra) (Rob Herring)
- Add multiple PFs support for endpoint (Xiaowei Bao)
- Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)
Miscellaneous:
- Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
- Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
- Fix "cast truncates bits from constant value" warnings (Gustavo
Pimentel)
- Remove redundant zeroing for sg_init_table() (Julia Lawall)
- Use scnprintf(), not snprintf(), in sysfs "show" functions
(Krzysztof Wilczyński)
- Remove unused assignments (Krzysztof Wilczyński)
- Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
- Simplify bool comparisons (Krzysztof Wilczyński)
- Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
Miao)
- Simplify return expressions (Qinglang Miao)"
* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
PCI: vmd: Update VMD PM to correctly use generic PCI PM
PCI: vmd: Create IRQ allocation helper
PCI: vmd: Create IRQ Domain configuration helper
PCI: vmd: Create bus offset configuration helper
PCI: vmd: Create physical offset helper
PCI: v3-semi: Remove unneeded break
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI/ASPM: Remove struct pcie_link_state.l1ss
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
PCI/ASPM: Remove struct aspm_register_info.latency_encoding
PCI/ASPM: Remove struct aspm_register_info.enabled
PCI/ASPM: Remove struct aspm_register_info.support
PCI/ASPM: Use 'parent' and 'child' for readability
PCI/ASPM: Move LTR path check to where it's used
PCI/ASPM: Move pci_clear_and_set_dword() earlier
PCI: dwc: Fix MSI page leakage in suspend/resume
...
|
||
|
Linus Torvalds
|
709ebe6dff |
ARM development for 5.10-rc1:
- handle inexact watchpoint addresses from Douglas Anderson. - decompressor serial debug cleanups from Linus Walleij. - update L2 cache prefetch bits from Guillaume Tucker. - add text offset and malloc size to the decompressor kexec data. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAl+MwEcACgkQ9OeQG+St rGSfEw//QywY4JWkK/4Qi35jiihr4b6ANUDbai2QbeOMCu00aUfpRXTmm/J6/+LU ACFLW456L405PmdPx6GirpRvkUOoGnfs/SMwO3GCxiK02vtnh7Ewy4wQi5ZbeIXQ 0scYBadzdpt3WVI/Lxq9grN476X2xZetwpZq05H4WHip6xwTH/JNeMPNhNuP1HgQ GoTFl+xTA8SirNobzzrhpLfBja3xdN6lVjmB6b+DdBBtbgh/k/4oFjLT1eHAJ511 SBQWuN3GjXMXhDfX93g+17qJNZE40593DSMzgdnK5KrxEC2YzsbGNI0eulID6Zlf lhB9kktvEZ5NfnItBUFqB+To+8Jr0eRu1Dj2Bu9qJ6c4pNo6bDt++D45Aj/jADKx wrLiuOl4g9wJ376DJCp6+LkDAcwaAjg4QTdt8GfAEifbnPCTq74vaKo2xGTeBI1E sbxaXcSSan+uP6NA7/cq/SwEhgA9knyCICgFNXb68hEyR4X9CCMPav+3tNOz6V8E u62DQkKJU2v7wnwR7lDJxKu08xlf2XBX3P+OSA0FlMYbTsBmKveTywIqEzKNQWvm e0gdgWIfCKfQmxVmpuS+3zsSTR1ZSmLkSwTV22juoJ9jQn2p6n5LJnnzT/Pl3ldS WG0DVGQYQSkgSkrbsiudZ70HfrK6UAm4VkJR5ay98HyS3XT537k= =0hdr -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: - handle inexact watchpoint addresses (Douglas Anderson) - decompressor serial debug cleanups (Linus Walleij) - update L2 cache prefetch bits (Guillaume Tucker) - add text offset and malloc size to the decompressor kexec data * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: add malloc size to decompressor kexec size structure ARM: add TEXT_OFFSET to decompressor kexec image structure ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values ARM: 9010/1: uncompress: Print the location of appended DTB ARM: 9009/1: uncompress: Enable debug in head.S ARM: 9008/1: uncompress: Drop excess whitespace print ARM: 9006/1: uncompress: Wait for ready and busy in debug prints ARM: 9005/1: debug: Select flow control for all debug UARTs ARM: 9004/1: debug: Split waituart to CTS and TXRDY ARM: 9003/1: uncompress: Delete unused debug macros ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses |
||
|
Linus Torvalds
|
5a32c3413d |
dma-mapping updates for 5.10
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
|
||
|
Linus Torvalds
|
0b8417c141 |
Power management updates for 5.10-rc1
- Rework cpufreq statistics collection to allow it to take place
when fast frequency switching is enabled in the governor (Viresh
Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core
code to support driver-specific devfreq DT bindings (Leonard
Crestez, Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection
statistics and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC
mode (Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow
domain power off transition to be aborted in the absence of the
"power off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they
are power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) driverrs (Kevin Hilman).
-----BEGIN PGP SIGNATURE-----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=rGhy
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the collection of cpufreq statistics to allow it to take
place if fast frequency switching is enabled in the governor, rework
the frequency invariance handling in the cpufreq core and drivers, add
new hardware support to a couple of cpufreq drivers, fix a number of
assorted issues and clean up the code all over.
Specifics:
- Rework cpufreq statistics collection to allow it to take place when
fast frequency switching is enabled in the governor (Viresh Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core code
to support driver-specific devfreq DT bindings (Leonard Crestez,
Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection statistics
and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC mode
(Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow domain
power off transition to be aborted in the absence of the "power
off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they are
power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) drivers (Kevin Hilman)"
* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
cpufreq: stats: Fix string format specifier mismatch
arm: disable frequency invariance for CONFIG_BL_SWITCHER
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
cpufreq: stats: Add memory barrier to store_reset()
cpufreq: schedutil: Simplify sugov_fast_switch()
ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
ACPI: EC: PM: Flush EC work unconditionally after wakeup
PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
cpufreq: Move traces and update to policy->cur to cpufreq core
cpufreq: stats: Enable stats for fast-switch as well
cpufreq: stats: Mark few conditionals with unlikely()
cpufreq: stats: Remove locking
cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
PM: domains: Allow to abort power off when no ->power_off() callback
PM: domains: Rename power state enums for genpd
PM / devfreq: tegra30: Improve initial hardware resetting
PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
PM / devfreq: Add devfreq_get_devfreq_by_node function
...
|
||
|
Linus Torvalds
|
a09b1d7850 |
xen: branch for v5.10-rc1
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX4aNVgAKCRCAXGG7T9hj vlrDAQDQ2qelTKKMEV9atKr0RTkHAKrhUidzlTINjFx7BIrTfQEA7TmDr3j0weQU 521+bxE803OEWElp2Qta30boXgGGXQo= =jKt7 -----END PGP SIGNATURE----- Merge tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - two small cleanup patches - avoid error messages when initializing MCA banks in a Xen dom0 - a small series for converting the Xen gntdev driver to use pin_user_pages*() instead of get_user_pages*() - intermediate fix for running as a Xen guest on Arm with KPTI enabled (the final solution will need new Xen functionality) * tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: Fix typo in xen_pagetable_p2m_free() x86/xen: disable Firmware First mode for correctable memory errors xen/arm: do not setup the runstate info page if kpti is enabled xen: remove redundant initialization of variable ret xen/gntdev.c: Convert get_user_pages*() to pin_user_pages*() xen/gntdev.c: Mark pages as dirty |
||
Matthew Wilcox
|
b2b29d6d01 |
mm: account PMD tables like PTE tables
We account the PTE level of the page tables to the process in order to make smarter OOM decisions and help diagnose why memory is fragmented. For these same reasons, we should account pages allocated for PMDs. With larger process address spaces and ASLR, the number of PMDs in use is higher than it used to be so the inaccuracy is starting to matter. [rppt@linux.ibm.com: arm: __pmd_free_tlb(): call page table destructor] Link: https://lkml.kernel.org/r/20200825111303.GB69694@linux.ibm.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Anders Roxell <anders.roxell@linaro.org> Link: http://lkml.kernel.org/r/20200627184642.GF25039@casper.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
c90578360c |
Merge branch 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull copy_and_csum cleanups from Al Viro:
"Saner calling conventions for csum_and_copy_..._user() and friends"
[ Removing 800+ lines of code and cleaning stuff up is good - Linus ]
* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ppc: propagate the calling conventions change down to csum_partial_copy_generic()
amd64: switch csum_partial_copy_generic() to new calling conventions
sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
mips: propagate the calling convention change down into __csum_partial_copy_..._user()
mips: __csum_partial_copy_kernel() has no users left
mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
i386: propagate the calling conventions change down to csum_partial_copy_generic()
sh: propage the calling conventions change down to csum_partial_copy_generic()
m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
arm: propagate the calling convention changes down to csum_partial_copy_from_user()
alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
saner calling conventions for csum_and_copy_..._user()
csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
csum_partial_copy_nocheck(): drop the last argument
unify generic instances of csum_partial_copy_nocheck()
icmp_push_reply(): reorder adding the checksum up
skb_copy_and_csum_bits(): don't bother with the last argument
|
||
|
Linus Torvalds
|
34eb62d868 |
Orphan link sections were a long-standing source of obscure bugs,
because the heuristics that various linkers & compilers use to handle them (include these bits into the output image vs discarding them silently) are both highly idiosyncratic and also version dependent. Instead of this historically problematic mess, this tree by Kees Cook (et al) adds build time asserts and build time warnings if there's any orphan section in the kernel or if a section is not sized as expected. And because we relied on so many silent assumptions in this area, fix a metric ton of dependencies and some outright bugs related to this, before we can finally enable the checks on the x86, ARM and ARM64 platforms. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl+Edv4RHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hiKBAApdJEOaK7hMc3013DYNctklIxEPJL2mFJ 11YJRIh4pUJTF0TE+EHT/D+rSIuRsyuoSmOQBQ61/wVSnyG067GjjVJRqh/eYaJ1 fDhJi2FuHOjXl+CiN0KxzBjjp+V4NhF7jHT59tpQSvfZeg7FjteoxfztxaCp5ek3 S3wHB3CC4c4jE3lfjHem1E9/PwT4kwPYx1c3gAUdEqJdjkihjX9fWusfjLeqW6/d Y5VkApi6bL9XiZUZj5l0dEIweLJJ86+PkKJqpo3spxxEak1LSn1MEix+lcJ8e1Kg sb/bEEivDcmFlFWOJnn0QLquCR0Cx5bz1pwsL0tuf0yAd4+sXX5IMuGUysZlEdKM BHL9h5HbevGF4BScwZwZH7lyEg7q67s5KnRu4hxy0Swfcj7y0oT/9lXqpbpZ2DqO Hd+bRRQKIbqnTMp0hcit9LfpLp93vj0dBlaV5ocAJJlu62u9VnwGG5HQuZ5giLUr kA1SLw63Y1wopFRxgFyER8les7eLsu0zxHeK44rRVlVnfI99OMTOgVNicmDFy3Fm AfcnfJG0BqBEJGQz5es34uQQKKBwFPtC9NztopI62KiwOspYYZyrO1BNxdOc6DlS mIHrmO89HMXuid5eolvLaFqUWirHoWO8TlycgZxUWVHc2txVPjAEU/axouU/dSSU w/6GpzAa+7g= =fXAw -----END PGP SIGNATURE----- Merge tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull orphan section checking from Ingo Molnar: "Orphan link sections were a long-standing source of obscure bugs, because the heuristics that various linkers & compilers use to handle them (include these bits into the output image vs discarding them silently) are both highly idiosyncratic and also version dependent. Instead of this historically problematic mess, this tree by Kees Cook (et al) adds build time asserts and build time warnings if there's any orphan section in the kernel or if a section is not sized as expected. And because we relied on so many silent assumptions in this area, fix a metric ton of dependencies and some outright bugs related to this, before we can finally enable the checks on the x86, ARM and ARM64 platforms" * tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/boot/compressed: Warn on orphan section placement x86/build: Warn on orphan section placement arm/boot: Warn on orphan section placement arm/build: Warn on orphan section placement arm64/build: Warn on orphan section placement x86/boot/compressed: Add missing debugging sections to output x86/boot/compressed: Remove, discard, or assert for unwanted sections x86/boot/compressed: Reorganize zero-size section asserts x86/build: Add asserts for unwanted sections x86/build: Enforce an empty .got.plt section x86/asm: Avoid generating unused kprobe sections arm/boot: Handle all sections explicitly arm/build: Assert for unwanted sections arm/build: Add missing sections arm/build: Explicitly keep .ARM.attributes sections arm/build: Refactor linker script headers arm64/build: Assert for unwanted sections arm64/build: Add missing DWARF sections arm64/build: Use common DISCARDS in linker script arm64/build: Remove .eh_frame* sections due to unwind tables ... |
||
|
Linus Torvalds
|
e6412f9833 |
EFI changes for v5.10:
- Preliminary RISC-V enablement - the bulk of it will arrive via the RISCV tree.
- Relax decompressed image placement rules for 32-bit ARM
- Add support for passing MOK certificate table contents via a config table
rather than a EFI variable.
- Add support for 18 bit DIMM row IDs in the CPER records.
- Work around broken Dell firmware that passes the entire Boot#### variable
contents as the command line
- Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we can
identify it in the memory map listings.
- Don't abort the boot on arm64 if the EFI RNG protocol is available but
returns with an error
- Replace slashes with exclamation marks in efivarfs file names
- Split efi-pstore from the deprecated efivars sysfs code, so we can
disable the latter on !x86.
- Misc fixes, cleanups and updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZNI8
-----END PGP SIGNATURE-----
Merge tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI changes from Ingo Molnar:
- Preliminary RISC-V enablement - the bulk of it will arrive via the
RISCV tree.
- Relax decompressed image placement rules for 32-bit ARM
- Add support for passing MOK certificate table contents via a config
table rather than a EFI variable.
- Add support for 18 bit DIMM row IDs in the CPER records.
- Work around broken Dell firmware that passes the entire Boot####
variable contents as the command line
- Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we
can identify it in the memory map listings.
- Don't abort the boot on arm64 if the EFI RNG protocol is available
but returns with an error
- Replace slashes with exclamation marks in efivarfs file names
- Split efi-pstore from the deprecated efivars sysfs code, so we can
disable the latter on !x86.
- Misc fixes, cleanups and updates.
* tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
efi: mokvar: add missing include of asm/early_ioremap.h
efi: efivars: limit availability to X86 builds
efi: remove some false dependencies on CONFIG_EFI_VARS
efi: gsmi: fix false dependency on CONFIG_EFI_VARS
efi: efivars: un-export efivars_sysfs_init()
efi: pstore: move workqueue handling out of efivars
efi: pstore: disentangle from deprecated efivars module
efi: mokvar-table: fix some issues in new code
efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure
efivarfs: Replace invalid slashes with exclamation marks in dentries.
efi: Delete deprecated parameter comments
efi/libstub: Fix missing-prototypes in string.c
efi: Add definition of EFI_MEMORY_CPU_CRYPTO and ability to report it
cper,edac,efi: Memory Error Record: bank group/address and chip id
edac,ghes,cper: Add Row Extension to Memory Error Record
efi/x86: Add a quirk to support command line arguments on Dell EFI firmware
efi/libstub: Add efi_warn and *_once logging helpers
integrity: Load certs from the EFI MOK config table
integrity: Move import of MokListRT certs to a separate routine
efi: Support for MOK variable config table
...
|
||
Ionela Voinescu
|
6699e91c07 |
arm: disable frequency invariance for CONFIG_BL_SWITCHER
big.LITTLE switching complicates the setting of a correct cpufreq-based frequency invariance scale factor due to (as observed in drivers/cpufreq/vexpress-spc-cpufreq.c): - Incorrect current and maximum frequencies as a result of the exposure of a virtual frequency table to the cpufreq core, - Missed updates as a result of asynchronous frequency adjustments caused by frequency changes in other CPU pairs. Given that its functionality is atypical in regards to frequency invariance and this is an old technology, disable frequency invariance for when big.LITTLE switching is configured in to prevent incorrect scale setting. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Suggested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Ionela Voinescu
|
a20b7053b5 |
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
Compared to other arch_* functions, arch_set_freq_scale() has an atypical weak definition that can be replaced by a strong architecture specific implementation. The more typical support for architectural functions involves defining an empty stub in a header file if the symbol is not already defined in architecture code. Some examples involve: - #define arch_scale_freq_capacity topology_get_freq_scale - #define arch_scale_freq_invariant topology_scale_freq_invariant - #define arch_scale_cpu_capacity topology_get_cpu_scale - #define arch_update_cpu_topology topology_update_cpu_topology - #define arch_scale_thermal_pressure topology_get_thermal_pressure - #define arch_set_thermal_pressure topology_set_thermal_pressure Bring arch_set_freq_scale() in line with these functions by renaming it to topology_set_freq_scale() in the arch topology driver, and by defining the arch_set_freq_scale symbol to point to the new function for arm and arm64. While there are other users of the arch_topology driver, this patch defines arch_set_freq_scale for arm and arm64 only, due to their existing definitions of arch_scale_freq_capacity. This is the getter function of the frequency invariance scale factor and without a getter function, the setter function - arch_set_freq_scale() has not purpose. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> (BL_SWITCHER and topology parts) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Christoph Hellwig
|
a1fd09e8e6 |
dma-mapping: move dma-debug.h to kernel/dma/
Most of dma-debug.h is not required by anything outside of kernel/dma. Move the four declarations needed by dma-mappin.h or dma-ops providers into dma-mapping.h and dma-map-ops.h, and move the remainder of the file to kernel/dma/debug.h. Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Christoph Hellwig
|
5db5d93089 |
dma-mapping: remove <asm/dma-contiguous.h>
Just provide a weak default definition of dma_contiguous_early_fixup and let arm override it. Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
Stefano Stabellini
|
f88af7229f |
xen/arm: do not setup the runstate info page if kpti is enabled
The VCPUOP_register_runstate_memory_area hypercall takes a virtual address of a buffer as a parameter. The semantics of the hypercall are such that the virtual address should always be valid. When KPTI is enabled and we are running userspace code, the virtual address is not valid, thus, Linux is violating the semantics of VCPUOP_register_runstate_memory_area. Do not call VCPUOP_register_runstate_memory_area when KPTI is enabled. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> CC: Bertrand Marquis <Bertrand.Marquis@arm.com> CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Link: https://lore.kernel.org/r/20200924234955.15455-1-sstabellini@kernel.org Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> |
||
|
Christoph Hellwig
|
38225f2ef2 |
ARM/omap1: switch to use dma_direct_set_offset for lbus DMA offsets
Switch the omap1510 platform ohci device to use dma_direct_set_offset to set the DMA offset instead of using direct hooks into the DMA mapping code and remove the now unused hooks. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> |
||
Masahiro Yamada
|
596b0474d3 |
kbuild: preprocess module linker script
There was a request to preprocess the module linker script like we do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512) The difference between vmlinux.lds and module.lds is that the latter is needed for external module builds, thus must be cleaned up by 'make mrproper' instead of 'make clean'. Also, it must be created by 'make modules_prepare'. You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by 'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to arch/$(SRCARCH)/include/asm/module.lds.h, which is included from scripts/module.lds.S. scripts/module.lds is fine because 'make clean' keeps all the build artifacts under scripts/. You can add arch-specific sections in <asm/module.lds.h>. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Jessica Yu <jeyu@kernel.org> |
||
Lorenzo Pieralisi
|
fc177304d1 |
ARM/PCI: Remove unused fields from struct hw_pci
The msi_ctrl, io_optional and align_resource fields in struct hw_pci are currently unused by arm/mach PCI host controller drivers and we won't be adding any new users. Remove them and related code. Link: https://lore.kernel.org/r/20200904141607.4066-1-lorenzo.pieralisi@arm.com Link: https://lore.kernel.org/r/20200916103045.28651-1-lorenzo.pieralisi@arm.com Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> |
||
Valentin Schneider
|
15e5d5b45b |
arch_topology, arm, arm64: define arch_scale_freq_invariant()
arch_scale_freq_invariant() is used by schedutil to determine whether
the scheduler's load-tracking signals are frequency invariant. Its
definition is overridable, though by default it is hardcoded to 'true'
if arch_scale_freq_capacity() is defined ('false' otherwise).
This behaviour is not overridden on arm, arm64 and other users of the
generic arch topology driver, which is somewhat precarious:
arch_scale_freq_capacity() will always be defined, yet not all cpufreq
drivers are guaranteed to drive the frequency invariance scale factor
setting. In other words, the load-tracking signals may very well *not*
be frequency invariant.
Now that cpufreq can be queried on whether the current driver is driving
the Frequency Invariance (FI) scale setting, the current situation can
be improved. This combines the query of whether cpufreq supports the
setting of the frequency scale factor, with whether all online CPUs are
counter-based FI enabled.
While cpufreq FI enablement applies at system level, for all CPUs,
counter-based FI support could also be used for only a subset of CPUs to
set the invariance scale factor. Therefore, if cpufreq-based FI support
is present, we consider the system to be invariant. If missing, we
require all online CPUs to be counter-based FI enabled in order for the
full system to be considered invariant.
If the system ends up not being invariant, a new condition is needed in
the counter initialization code that disables all scale factor setting
based on counters.
Precedence of counters over cpufreq use is not important here. The
invariant status is only given to the system if all CPUs have at least
one method of setting the frequency scale factor.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
Jim Quinlan
|
e0d072782c |
dma-mapping: introduce DMA range map, supplanting dma_pfn_offset
The new field 'dma_range_map' in struct device is used to facilitate the use of single or multiple offsets between mapping regions of cpu addrs and dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only capable of holding a single uniform offset and had no region bounds checking. The function of_dma_get_range() has been modified so that it takes a single argument -- the device node -- and returns a map, NULL, or an error code. The map is an array that holds the information regarding the DMA regions. Each range entry contains the address offset, the cpu_start address, the dma_start address, and the size of the region. of_dma_configure() is the typical manner to set range offsets but there are a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel driver code. These cases now invoke the function dma_direct_set_offset(dev, cpu_addr, dma_addr, size). Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> [hch: various interface cleanups] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Nathan Chancellor <natechancellor@gmail.com> |
||
|
Christoph Hellwig
|
3799e402a4 |
ARM/dma-mapping: move various helpers from dma-mapping.h to dma-direct.h
Move the helpers to translate to and from direct mapping DMA addresses to dma-direct.h. This not only is the most logical place, but the new placement also avoids dependency loops with pending commits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> |
||
|
Christoph Hellwig
|
002a26fb55 |
ARM/dma-mapping: remove dma_to_virt
dma_to_virt is entirely unused, remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Christoph Hellwig
|
f982438e82 |
ARM/dma-mapping: remove a __arch_page_to_dma #error
The __arch_page_to_dma hook is long gone. Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
Marc Zyngier
|
5ebf353af2 |
ARM: Remove custom IRQ stat accounting
Let's switch the arm code to the core accounting, which already does everything we need. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Marc Zyngier
|
8aa837cb7a |
ARM: Kill __smp_cross_call and co
The old IPI registration interface is now unused on arm, so let's get rid of it. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Ard Biesheuvel
|
6208857b8f |
efi/libstub: arm32: Base FDT and initrd placement on image address
The way we use the base of DRAM in the EFI stub is problematic as it is ill defined what the base of DRAM actually means. There are some restrictions on the placement of FDT and initrd which are defined in terms of dram_base, but given that the placement of the kernel in memory is what defines these boundaries (as on ARM, this is where the linear region starts), it is better to use the image address in these cases, and disregard dram_base altogether. Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org> Tested-by: Maxim Uvarov <maxim.uvarov@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Linus Walleij
|
4df24fef09 |
ARM: 9005/1: debug: Select flow control for all debug UARTs
Instead of a flow control selection mechanism specifically for 8250, make this available for all debug UARTs. If the debug UART supports waiting for CTS to be asserted, then this code can be activated for terminals that need it. We keep the defaults for EBSA110, Footbridge, Gemini and RPC so that this still works as expected for these older platforms: they assume that flow control shall be enabled for debug prints. I switch the location of the check for ifdef CONFIG_DEBUG_UART_FLOW_CONTROL from the actual debug UART drivers: the code would get compiled-out for 8250 and Tegra unless their custom config (or passing -DFLOW_CONTROL in the Tegra case) was not set. Instead this is conditional at the three places where we print debug messages. The idea is that debug UARTs can be implemented without this ifdef boilerplate so they look cleaner, alas the ifdef has to be somewhere. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Linus Walleij
|
2c50a570e9 |
ARM: 9004/1: debug: Split waituart to CTS and TXRDY
This patch was triggered by a remark from Russell that
introducing a call to the waituart (needed to fix debug prints
on the Qualcomm platforms) was dangerous because in some cases
this will involve waiting for a modem CTS (clear to send)
signal, and debug messages would maybe not work on platforms
with no modem connected to the UART port: they will just
hang waiting for the modem to assert CTS and this might never
happen.
Looking through all UART debug drivers implementing the waituart
macro I discovered that all users except two actually use this
macro to check if the UART is ready for TX, let's call this
TXRDY.
Only two debug UART drivers actually check for CTS:
- arch/arm/include/debug/8250.S
- arch/arm/include/debug/tegra.S
The former is very significant since the 8250 is possibly
the most common UART on the planet.
We have the following problem: the semantics of waituart are
ambiguous making it dangerous to introduce the macro to debug
code fixing debug prints for Qualcomm. To start to pry this
problem apart, this patch does the following:
- Convert all debug UART drivers to define two macros:
- waituartcts with the clear semantic to wait for CTS
to be asserted
- waituarttxrdy with the clear semantic to wait for the TX
capability of the UART to be ready
- When doing this take care to assign the right function to
each drivers macro, so they now do exactly the above.
- Update the three sites in the kernel invoking the waituart
macro to call waituartcts/waituarttxrdy in sequence, so that
the functional impact on the kernel should be zero.
After this we can start to change the code sites using this
code to do the right thing.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
||
|
Marc Zyngier
|
56afcd3dbd |
ARM: Allow IPIs to be handled as normal interrupts
In order to deal with IPIs as normal interrupts, let's add a new way to register them with the architecture code. set_smp_ipi_range() takes a range of interrupts, and allows the arch code to request them as if the were normal interrupts. A standard handler is then called by the core IRQ code to deal with the IPI. This means that we don't need to call irq_enter/irq_exit, and that we don't need to deal with set_irq_regs either. So let's move the dispatcher into its own function, and leave handle_IPI() as a compatibility function. On the sending side, let's make use of ipi_send_mask, which already exists for this purpose. One of the major difference is that we end up, in some cases (such as when performing IRQ time accounting on the scheduler IPI), end up with nested irq_enter()/irq_exit() pairs. Other than the (relatively small) overhead, there should be no consequences to it (these pairs are designed to nest correctly, and the accounting shouldn't be off). Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Christoph Hellwig
|
5ceda74093 |
dma-direct: rename and cleanup __phys_to_dma
The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious. Try to improve the situation by renaming __phys_to_dma to phys_to_dma_unencryped, and not forcing architectures that want to override phys_to_dma to actually provide __phys_to_dma. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> |
||
|
Christoph Hellwig
|
7bc5c428a6 |
dma-direct: remove __dma_to_phys
There is no harm in just always clearing the SME encryption bit, while significantly simplifying the interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> |
||
Florian Fainelli
|
4e5cafa8b3 |
ARM: brcmstb: Add debug UART entry for 72615
72165 has the same memory map as 7278 and the same physical address for the UART, alias the definition accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> |
||
Kees Cook
|
0c918e753f |
arm/build: Assert for unwanted sections
In preparation for warning on orphan sections, enforce expected-to-be-zero-sized sections (since discarding them might hide problems with them suddenly gaining unexpected entries). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Link: https://lore.kernel.org/r/20200821194310.3089815-19-keescook@chromium.org |
||
|
Kees Cook
|
512dd2eebe |
arm/build: Add missing sections
Add missing text stub sections .vfp11_veneer and .v4_bx, as well as missing DWARF sections, when present in the build. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Russell King <linux@armlinux.org.uk> Link: https://lore.kernel.org/r/20200821194310.3089815-18-keescook@chromium.org |
||
|
Kees Cook
|
3b14aefb84 |
arm/build: Explicitly keep .ARM.attributes sections
In preparation for adding --orphan-handling=warn, explicitly keep the .ARM.attributes section (at address 0[1]) by expanding the existing ELF_DETAILS macro into ARM_DETAILS. [1] https://reviews.llvm.org/D85867 Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Cc: Russell King <linux@armlinux.org.uk> Link: https://lore.kernel.org/lkml/CAKwvOdk-racgq5pxsoGS6Vtifbtrk5fmkmnoLxrQMaOvV0nPWw@mail.gmail.com/ Link: https://lore.kernel.org/r/20200821194310.3089815-17-keescook@chromium.org |
||
|
Kees Cook
|
d7e3b065dc |
arm/build: Refactor linker script headers
In preparation for adding --orphan-handling=warn, refactor the linker script header includes, and extract common macros. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Link: https://lore.kernel.org/r/20200821194310.3089815-16-keescook@chromium.org |
||
|
Al Viro
|
1d60be3c25 |
arm: propagate the calling convention changes down to csum_partial_copy_from_user()
... and get rid of the "clean the destination on error" crap. Simplifies the fault handlers and the function itself... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Al Viro
|
c693cc4676 |
saner calling conventions for csum_and_copy_..._user()
All callers of these primitives will * discard anything we might've copied in case of error * ignore the csum value in case of error * always pass 0xffffffff as the initial sum, so the resulting csum value (in case of success, that is) will never be 0. That suggest the following calling conventions: * don't pass err_ptr - just return 0 on error. * don't bother with zeroing destination, etc. in case of error * don't pass the initial sum - just use 0xffffffff. This commit does the minimal conversion in the instances of csum_and_copy_...(); the changes of actual asm code behind them are done later in the series. Note that this asm code is often shared with csum_partial_copy_nocheck(); the difference is that csum_partial_copy_nocheck() passes 0 for initial sum while csum_and_copy_..._user() pass 0xffffffff. Fortunately, we are free to pass 0xffffffff in all cases and subsequent patches will use that freedom without any special comments. A part that could be split off: parisc and uml/i386 claimed to have csum_and_copy_to_user() instances of their own, but those were identical to the generic one, so we simply drop them. Not sure if it's worth a separate commit... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Al Viro
|
cc44c17baf |
csum_partial_copy_nocheck(): drop the last argument
It's always 0. Note that we theoretically could use ~0U as well - result will be the same modulo 0xffff, _if_ the damn thing did the right thing for any value of initial sum; later we'll make use of that when convenient. However, unlike csum_and_copy_..._user(), there are instances that did not work for arbitrary initial sums; c6x is one such. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Al Viro
|
6e41c585e3 |
unify generic instances of csum_partial_copy_nocheck()
quite a few architectures have the same csum_partial_copy_nocheck() - simply memcpy() the data and then return the csum of the copy. hexagon, parisc, ia64, s390, um: explicitly spelled out that way. arc, arm64, csky, h8300, m68k/nommu, microblaze, mips/GENERIC_CSUM, nds32, nios2, openrisc, riscv, unicore32: end up picking the same thing spelled out in lib/checksum.h (with varying amounts of perversions along the way). everybody else (alpha, arm, c6x, m68k/mmu, mips/!GENERIC_CSUM, powerpc, sh, sparc, x86, xtensa) have non-generic variants. For all except c6x the declaration is in their asm/checksum.h. c6x uses the wrapper from asm-generic/checksum.h that would normally lead to the lib/checksum.h instance, but in case of c6x we end up using an asm function from arch/c6x instead. Screw that mess - have architectures with private instances define _HAVE_ARCH_CSUM_AND_COPY in their asm/checksum.h and have the default one right in net/checksum.h conditional on _HAVE_ARCH_CSUM_AND_COPY *not* defined. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Florian Fainelli
|
6b84ca265f |
ARM: brcmstb: Add debug UART entry for 72614
72164 has the same memory map as 7278 and the same physical address for the UART, alias the definition accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> |
||
|
Linus Torvalds
|
b923f1247b |
A set oftimekeeping/VDSO updates:
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the counter
read function when time namespace support is enabled. Adding the pointer
is a NOOP for all other architectures because the compiler is supposed
to optimize that out when it is unused in the architecture specific
inline. The change also solved a similar problem for MIPS which
fortunately has time namespaces not yet enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another sequence
counter in the S390 implementation. A better solution is to utilize the
already existing VDSO sequence count for this. The core code now exposes
helper functions which allow to serialize against the timekeeper code
and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It now has
an embedded architecture specific struct embedded which defaults to an
empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support to
work from a common upstream base.
- A trivial comment fix.
-----BEGIN PGP SIGNATURE-----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=y8Z5
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping updates from Thomas Gleixner:
"A set of timekeeping/VDSO updates:
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the
counter read function when time namespace support is enabled.
Adding the pointer is a NOOP for all other architectures because
the compiler is supposed to optimize that out when it is unused in
the architecture specific inline. The change also solved a similar
problem for MIPS which fortunately has time namespaces not yet
enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another
sequence counter in the S390 implementation. A better solution is
to utilize the already existing VDSO sequence count for this. The
core code now exposes helper functions which allow to serialize
against the timekeeper code and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It
now has an embedded architecture specific struct embedded which
defaults to an empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support
to work from a common upstream base.
- A trivial comment fix"
* tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Delete repeated words in comments
lib/vdso: Allow to add architecture-specific vdso data
timekeeping/vsyscall: Provide vdso_update_begin/end()
vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
|
||
|
Linus Torvalds
|
9ad57f6dfc |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: - most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction, mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util, memory-hotplug, cleanups, uaccess, migration, gup, pagemap), - various other subsystems (alpha, misc, sparse, bitmap, lib, bitops, checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump, exec, kdump, rapidio, panic, kcov, kgdb, ipc). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits) mm/gup: remove task_struct pointer for all gup code mm: clean up the last pieces of page fault accountings mm/xtensa: use general page fault accounting mm/x86: use general page fault accounting mm/sparc64: use general page fault accounting mm/sparc32: use general page fault accounting mm/sh: use general page fault accounting mm/s390: use general page fault accounting mm/riscv: use general page fault accounting mm/powerpc: use general page fault accounting mm/parisc: use general page fault accounting mm/openrisc: use general page fault accounting mm/nios2: use general page fault accounting mm/nds32: use general page fault accounting mm/mips: use general page fault accounting mm/microblaze: use general page fault accounting mm/m68k: use general page fault accounting mm/ia64: use general page fault accounting mm/hexagon: use general page fault accounting mm/csky: use general page fault accounting ... |
||
|
Christoph Hellwig
|
428e2976a5 |
uaccess: remove segment_eq
segment_eq is only used to implement uaccess_kernel. Just open code uaccess_kernel in the arch uaccess headers and remove one layer of indirection. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Greentime Hu <green.hu@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Link: http://lkml.kernel.org/r/20200710135706.537715-5-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
952ace797c |
IOMMU Updates for Linux v5.9
Including:
- Removal of the dev->archdata.iommu (or similar) pointers from
most architectures. Only Sparc is left, but this is private to
Sparc as their drivers don't use the IOMMU-API.
- ARM-SMMU Updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell
Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d Updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel
drivers into their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test
coverage)
-----BEGIN PGP SIGNATURE-----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=3O2Z
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
|
||
Mike Rapoport
|
f9cb654cb5 |
asm-generic: pgalloc: provide generic pgd_free()
Most architectures define pgd_free() as a wrapper for free_page(). Provide a generic version in asm-generic/pgalloc.h and enable its use for most architectures. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Matthew Wilcox <willy@infradead.org> Link: http://lkml.kernel.org/r/20200627143453.31835-7-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
1355c31eeb |
asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()
For most architectures that support >2 levels of page tables, pmd_alloc_one() is a wrapper for __get_free_pages(), sometimes with __GFP_ZERO and sometimes followed by memset(0) instead. More elaborate versions on arm64 and x86 account memory for the user page tables and call to pgtable_pmd_page_ctor() as the part of PMD page initialization. Move the arm64 version to include/asm-generic/pgalloc.h and use the generic version on several architectures. The pgtable_pmd_page_ctor() is a NOP when ARCH_ENABLE_SPLIT_PMD_PTLOCK is not enabled, so there is no functional change for most architectures except of the addition of __GFP_ACCOUNT for allocation of user page tables. The pmd_free() is a wrapper for free_page() in all the cases, so no functional change here. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/20200627143453.31835-5-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
ca15ca406f |
mm: remove unneeded includes of <asm/pgalloc.h>
Patch series "mm: cleanup usage of <asm/pgalloc.h>"
Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table. These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.
In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>
In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.
This patch (of 8):
In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory. Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.
As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.
The process was somewhat automated using
sed -i -E '/[<"]asm\/pgalloc\.h/d' \
$(grep -L -w -f /tmp/xx \
$(git grep -E -l '[<"]asm/pgalloc\.h'))
where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.
[rppt@linux.ibm.com: fix powerpc warning]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
40ddad1913 |
ARM development for 5.9-rc1:
- add arch/arm/Kbuild from Masahiro Yamada. - simplify act_mm macro, since it contains an open-coded get_thread_info. - VFP updates for Clang from Stefan Agner. - Fix unwinder for Clang from Nathan Huckleberry. - Remove unused it8152 PCI host controller, used by the removed cm-x2xx platforms from Mike Rapoport. - Further explanation of __range_ok(). - Remove kimage_voffset that isn't used anymore from Marc Zyngier. - Drop ancient Thumb-2 workaround for old binutils from Ard Biesheuvel. - Documentation cleanup for mach-* from Pete Zaitcev. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAl8sOXMACgkQ9OeQG+St rGRFCBAAlBOdZmiB4/UW59LEdBRhNg4C0HNQmOxQqp6oMZLw9Whu3SDHeBePVvqA gp8z3rJL6N6XhSmv0dplWxgX2FrBfscjlwa7wLcwtz1NCTeGT1xL6s2dwH2q8Ocw swfcFhdFiJ+ewtylfYqogGPQyFXOPnTGv7B/cH+IX1kP0OcpgDb+pDy24MrrrD4r 6DC8fIkZtDcvABJGSEthiMx29Pn1jbGAZWW3acVDtnMgppzB6brMH/A1HirMo0G9 qGxejqJ+/DgsQciRBxfSI2N4U42XRVacW1vGdN19tFWYhHNStx9PnV9JHo61sQFM UiI1fARat8dlY8qT72binE1gbDZ4HOLJ5181BjDEchoO/qnxxi0tOlOlFO6PB0fz innRDC5TGLjBb/9B5YkHLSoDDo0erovJUV1m1pz/T9Dd6rO+1BV6Q2GI312dxLVR IfRJ8PVI9WZaYjZgxp14m1l0tRNI0BJoRT6QjADwAxo5leRFho6KbsfAgNCm8/ni lfqo3kHrLnd3pojljiuvW8/oBdqYTA86VAlfzyJ/rFOHMlROeFGCoCDqsBeqR1gZ pX3zQU5Jf8pJXsXaM1hXO/CcK61Nr4/m18uyjLpJeyYNJWz3CZ/hndhLJR91cShT hTP1bB/UQlprOP6CgjTPj1MCCA9HCRCo8k5y/s9VKpMZ8SM9Ghw= =RWzO -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: - add arch/arm/Kbuild from Masahiro Yamada. - simplify act_mm macro, since it contains an open-coded get_thread_info. - VFP updates for Clang from Stefan Agner. - Fix unwinder for Clang from Nathan Huckleberry. - Remove unused it8152 PCI host controller, used by the removed cm-x2xx platforms from Mike Rapoport. - Further explanation of __range_ok(). - Remove kimage_voffset that isn't used anymore from Marc Zyngier. - Drop ancient Thumb-2 workaround for old binutils from Ard Biesheuvel. - Documentation cleanup for mach-* from Pete Zaitcev. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8996/1: Documentation/Clean up the description of mach-<class> ARM: 8995/1: drop Thumb-2 workaround for ancient binutils ARM: 8994/1: mm: drop kimage_voffset which was only used by KVM ARM: uaccess: add further explanation of __range_ok() ARM: 8993/1: remove it8152 PCI controller driver ARM: 8992/1: Fix unwind_frame for clang-built kernels ARM: 8991/1: use VFP assembler mnemonics if available ARM: 8990/1: use VFP assembler mnemonics in register load/store macros ARM: 8989/1: use .fpu assembler directives instead of assembler arguments ARM: 8982/1: mm: Simplify act_mm macro ARM: 8981/1: add arch/arm/Kbuild |
||
Thomas Gleixner
|
4c5a116ada |
vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
MIPS already uses and S390 will need the vdso data pointer in __arch_get_hw_counter(). This works nicely as long as the architecture does not support time namespaces in the VDSO. With time namespaces enabled the regular accessor to the vdso data pointer __arch_get_vdso_data() will return the namespace specific VDSO data page for tasks which are part of a non-root time namespace. This would cause the architectures which need the vdso data pointer in __arch_get_hw_counter() to access the wrong vdso data page. Add a vdso_data pointer argument to __arch_get_hw_counter() and hand it in from the call sites in the core code. For architectures which do not need the data pointer in their counter accessor function the compiler will just optimize it out. Fix up all existing architecture implementations and make MIPS utilize the pointer instead of invoking the accessor function. No functional change and no change in the resulting object code (except MIPS). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/draft-87wo2ekuzn.fsf@nanos.tec.linutronix.de |
||
|
Linus Torvalds
|
e4cbce4d13 |
The main changes in this cycle were:
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the values
become larger. This is now replaced with more precise arithmetics,
using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl8oJDURHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1ixLg//bqWzFlfWirvngTgDxDnplwUTyKXmMCcq
R1IYhlyK2O5FxvhbRmdmW11W3yzyTPvgCs6Q/70negGaPNe2w1OxfxiK9NMKz5eu
M1LoXas7pL5g7Pr/ZxxHk/8VqJLV4t9MkodiiInmV6lTaznT3sU6a/kpYQjJyFnG
Tuu9jd6JhdRKmePDJnNmUBoGQ7JiOQDcX4HtkcQ3OA+An3624tmJzbW1yts+uj7J
ZWo2EY60RfbA9MxQXGPOaR/nAjngWs4Q6tddAh10mftsPq1gR2iFUKju1d31MQt/
RHLdiqJf+AyUC4popKG7a+7ilCKMBwPociSreTJNPyEUQ1X4AM3vUVk4yjUoiDph
k2WdsCF8/JRdhXg0NnrpPUqOaAbQj53EeXnitEb92E7WyTZgLOvAtpV//xZo6utp
2QHerfrQ9SoGQjz/ho78za5vQtV1x25yDhd+X4XV4QEhIy85G9/2JCpC/Kc/TXLf
OO7A4X69XztKTEJhP60g8ldCPUe4N2vbh1vKY6oAD8AFQVVNZ6n7375/Qa//b0/k
++hcYkPc2EK97/aBFdvzDgqb7aUo7Mtn2ibke16sQU4szulaoRuAHQG4jdGKMwbD
dk2VBoxyxeYFXWHsNneSe87+ha3sd0dSN0ul1EB/SlFrVELMvy634YXnMYGW8ima
PzyPB0ezpuA=
=PbO7
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the
values become larger. This is now replaced with more precise
arithmetics, using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
* tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/doc: Factorize bits between sched-energy.rst & sched-capacity.rst
sched/doc: Document capacity aware scheduling
sched: Document arch_scale_*_capacity()
arm, arm64: Fix selection of CONFIG_SCHED_THERMAL_PRESSURE
Documentation/sysctl: Document uclamp sysctl knobs
sched/uclamp: Add a new sysctl to control RT default boost value
sched/uclamp: Fix a deadlock when enabling uclamp static key
sched: Remove duplicated tick_nohz_full_enabled() check
sched: Fix a typo in a comment
sched/uclamp: Remove unnecessary mutex_init()
arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE
sched: Cleanup SCHED_THERMAL_PRESSURE kconfig entry
arch_topology, sched/core: Cleanup thermal pressure definition
trace/events/sched.h: fix duplicated word
linux/sched/mm.h: drop duplicated words in comments
smp: Fix a potential usage of stale nr_cpus
sched/fair: update_pick_idlest() Select group with lowest group_util when idle_cpus are equal
sched: nohz: stop passing around unused "ticks" parameter.
sched: Better document ttwu()
sched: Add a tracepoint to track rq->nr_running
...
|
||
|
Linus Torvalds
|
9ba19ccd2d |
These were the main changes in this cycle:
- LKMM updates: mostly documentation changes, but also some new litmus tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again. Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the 'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>, decouple
lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3MTT
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- LKMM updates: mostly documentation changes, but also some new litmus
tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all
fixes in place to support KCSAN, so GCC support can be enabled again.
Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the
'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>,
decouple lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
* tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
kcsan: Improve IRQ state trace reporting
lockdep: Refactor IRQ trace events fields into struct
seqlock: lockdep assert non-preemptibility on seqcount_t write
lockdep: Add preemption enabled/disabled assertion APIs
seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount()
seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs
seqlock: Reorder seqcount_t and seqlock_t API definitions
seqlock: seqcount_t latch: End read sections with read_seqcount_retry()
seqlock: Properly format kernel-doc code samples
Documentation: locking: Describe seqlock design and usage
locking/qspinlock: Do not include atomic.h from qspinlock_types.h
locking/atomic: Move ATOMIC_INIT into linux/types.h
lockdep: Move list.h inclusion into lockdep.h
locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs
futex: Remove unused or redundant includes
futex: Consistently use fshared as boolean
futex: Remove needless goto's
futex: Remove put_futex_key()
rwsem: fix commas in initialisation
docs: locking: Replace HTTP links with HTTPS ones
...
|
||
|
Linus Torvalds
|
145ff1ec09 |
arm64 and cross-arch updates for 5.9:
- Removal of the tremendously unpopular read_barrier_depends() barrier,
which is a NOP on all architectures apart from Alpha, in favour of
allowing architectures to override READ_ONCE() and do whatever dance
they need to do to ensure address dependencies provide LOAD ->
LOAD/STORE ordering. This work also offers a potential solution if
compilers are shown to convert LOAD -> LOAD address dependencies into
control dependencies (e.g. under LTO), as weakly ordered architectures
will effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic, augment
the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the device
ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions and
kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words.
-----BEGIN PGP SIGNATURE-----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=mh79
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 and cross-arch updates from Catalin Marinas:
"Here's a slightly wider-spread set of updates for 5.9.
Going outside the usual arch/arm64/ area is the removal of
read_barrier_depends() series from Will and the MSI/IOMMU ID
translation series from Lorenzo.
The notable arm64 updates include ARMv8.4 TLBI range operations and
translation level hint, time namespace support, and perf.
Summary:
- Removal of the tremendously unpopular read_barrier_depends()
barrier, which is a NOP on all architectures apart from Alpha, in
favour of allowing architectures to override READ_ONCE() and do
whatever dance they need to do to ensure address dependencies
provide LOAD -> LOAD/STORE ordering.
This work also offers a potential solution if compilers are shown
to convert LOAD -> LOAD address dependencies into control
dependencies (e.g. under LTO), as weakly ordered architectures will
effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at
LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic,
augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the
device ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions
and kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words"
Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
...
|
||
Grygorii Strashko
|
aa54ea903a |
ARM: percpu.h: fix build error
Fix build error for the case:
defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)
config: keystone_defconfig
CC arch/arm/kernel/signal.o
In file included from ../include/linux/random.h:14,
from ../arch/arm/kernel/signal.c:8:
../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’:
../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’?
: "Q" (*(const unsigned long *)current_stack_pointer));
^~~~~~~~~~~~~~~~~~~~~
user_stack_pointer
Fixes:
|
||
Peter Zijlstra
|
f05d67179d | Merge branch 'locking/header' | ||
Herbert Xu
|
7ca8cf5347 |
locking/atomic: Move ATOMIC_INIT into linux/types.h
This patch moves ATOMIC_INIT from asm/atomic.h into linux/types.h. This allows users of atomic_t to use ATOMIC_INIT without having to include atomic.h as that way may lead to header loops. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Link: https://lkml.kernel.org/r/20200729123105.GB7047@gondor.apana.org.au |
||
Russell King
|
2350ebe2c4 |
ARM: uaccess: add further explanation of __range_ok()
Detail the success return condition, and that we rely on KERNEL_DS being zero for this to operate correctly. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Valentin Schneider
|
25980c7a79 |
arch_topology, sched/core: Cleanup thermal pressure definition
The following commit:
|
||
|
Mike Rapoport
|
6da5238fa3 |
ARM: 8993/1: remove it8152 PCI controller driver
The it8152 PCI host controller was only used by cm-x2xx platforms. Since these platforms were removed, there is no point to keep it8152 driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
Stefan Agner
|
2cbd1cc3dc |
ARM: 8991/1: use VFP assembler mnemonics if available
The integrated assembler of Clang 10 and earlier do not allow to access
the VFP registers through the coprocessor load/store instructions:
arch/arm/vfp/vfpmodule.c:342:2: error: invalid operand for instruction
fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_DEX|FPEXC_FP2V|FPEXC_VV|FPEXC_TRAP_MASK));
^
arch/arm/vfp/vfpinstr.h:79:6: note: expanded from macro 'fmxr'
asm("mcr p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr " #_vfp_ ", %0"
^
<inline asm>:1:6: note: instantiated into assembly here
mcr p10, 7, r0, cr8, cr0, 0 @ fmxr FPEXC, r0
^
This has been addressed with Clang 11 [0]. However, to support earlier
versions of Clang and for better readability use of VFP assembler
mnemonics still is preferred.
Ideally we would replace this code with the unified assembler language
mnemonics vmrs/vmsr on call sites along with .fpu assembler directives.
The GNU assembler supports the .fpu directive at least since 2.17 (when
documentation has been added). Since Linux requires binutils 2.21 it is
safe to use .fpu directive. However, binutils does not allow to use
FPINST or FPINST2 as an argument to vmrs/vmsr instructions up to
binutils 2.24 (see binutils commit 16d02dc907c5):
arch/arm/vfp/vfphw.S: Assembler messages:
arch/arm/vfp/vfphw.S:162: Error: operand 0 must be FPSID or FPSCR pr FPEXC -- `vmsr FPINST,r6'
arch/arm/vfp/vfphw.S:165: Error: operand 0 must be FPSID or FPSCR pr FPEXC -- `vmsr FPINST2,r8'
arch/arm/vfp/vfphw.S:235: Error: operand 1 must be a VFP extension System Register -- `vmrs r3,FPINST'
arch/arm/vfp/vfphw.S:238: Error: operand 1 must be a VFP extension System Register -- `vmrs r12,FPINST2'
Use as-instr in Kconfig to check if FPINST/FPINST2 can be used. If they
can be used make use of .fpu directives and UAL VFP mnemonics for
register access.
This allows to build vfpmodule.c with Clang and its integrated assembler.
[0] https://reviews.llvm.org/D59733
Link: https://github.com/ClangBuiltLinux/linux/issues/905
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
||
|
Stefan Agner
|
ee440336e5 |
ARM: 8990/1: use VFP assembler mnemonics in register load/store macros
The integrated assembler of Clang 10 and earlier do not allow to access
the VFP registers through the coprocessor load/store instructions:
<instantiation>:4:6: error: invalid operand for instruction
LDC p11, cr0, [r10],#32*4 @ FLDMIAD r10!, {d0-d15}
^
This has been addressed with Clang 11 [0]. However, to support earlier
versions of Clang and for better readability use of VFP assembler
mnemonics still is preferred.
Replace the coprocessor load/store instructions with explicit assembler
mnemonics to accessing the floating point coprocessor registers. Use
assembler directives to select the appropriate FPU version.
This allows to build these macros with GNU assembler as well as with
Clang's built-in assembler.
[0] https://reviews.llvm.org/D59733
Link: https://github.com/ClangBuiltLinux/linux/issues/905
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
||
Will Deacon
|
002dff36ac |
asm/rwonce: Don't pull <asm/barrier.h> into 'asm-generic/rwonce.h'
Now that 'smp_read_barrier_depends()' has gone the way of the Norwegian Blue, drop the inclusion of <asm/barrier.h> in 'asm-generic/rwonce.h'. This requires fixups to some architecture vdso headers which were previously relying on 'asm/barrier.h' coming in via 'linux/compiler.h'. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Peter Zijlstra
|
a634291588 |
arm: Break cyclic percpu include
In order to use <asm/percpu.h> in irqflags.h, we need to make sure asm/percpu.h does not itself depend on irqflags.h. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200623083721.454517573@infradead.org |
||
Joerg Roedel
|
fb0fd5f70c |
arm: Remove dev->archdata.iommu pointer
There are no users left, all drivers have been converted to use the per-device private pointer offered by IOMMU core. Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20200625130836.1916-12-joro@8bytes.org |
||
|
Ard Biesheuvel
|
2a55280a36 |
efi/libstub: arm: Print CPU boot mode and MMU state at boot
On 32-bit ARM, we may boot at HYP mode, or with the MMU and caches off (or both), even though the EFI spec does not actually support this. While booting at HYP mode is something we might tolerate, fiddling with the caches is a more serious issue, as disabling the caches is tricky to do safely from C code, and running without the Dcache makes it impossible to support unaligned memory accesses, which is another explicit requirement imposed by the EFI spec. So take note of the CPU mode and MMU state in the EFI stub diagnostic output so that we can easily diagnose any issues that may arise from this. E.g., EFI stub: Entering in SVC mode with MMU enabled Also, capture the CPSR and SCTLR system register values at EFI stub entry, and after ExitBootServices() returns, and check whether the MMU and Dcache were disabled at any point. If this is the case, a diagnostic message like the following will be emitted: efi: [Firmware Bug]: EFI stub was entered with MMU and Dcache disabled, please fix your firmware! efi: CPSR at EFI stub entry : 0x600001d3 efi: SCTLR at EFI stub entry : 0x00c51838 efi: CPSR after ExitBootServices() : 0x600001d3 efi: SCTLR after ExitBootServices(): 0x00c50838 Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Leif Lindholm <leif@nuviainc.com> |
||
|
Mike Rapoport
|
974b9b2c68 |
mm: consolidate pte_index() and pte_offset_*() definitions
All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
65fddcfca8 |
mm: reorder includes after introduction of linux/pgtable.h
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Mike Rapoport
|
ca5999fde0 |
mm: introduce include/linux/pgtable.h
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dmitry Safonov
|
e8d7b73532 |
arm: add loglvl to unwind_backtrace()
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Add log level argument to unwind_backtrace() as a preparation for introducing show_stack_loglvl(). As a good side-effect arm_syscall() is now printing errors with the same log level as the backtrace. [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200418201944.482088-6-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Dmitry Safonov
|
5489ab50c2 |
arm/asm: add loglvl to c_backtrace()
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Add log level argument to c_backtrace() as a preparation for introducing show_stack_loglvl(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200418201944.482088-5-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Christoph Hellwig
|
fca7f8e6fd |
arm: rename flush_cache_user_range to flush_icache_user_range
flush_icache_user_range will be the name for a generic primitive. Move the arm name so that arm already has an implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@armlinux.org.uk> Link: http://lkml.kernel.org/r/20200515143646.3857579-24-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Christoph Hellwig
|
97f52c1536 |
arm,sparc,unicore32: remove flush_icache_user_range
flush_icache_user_range is only used by <asm-generic/cacheflush.h>, so remove it from the architectures that implement it, but don't use <asm-generic/cacheflush.h>. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@armlinux.org.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Link: http://lkml.kernel.org/r/20200515143646.3857579-19-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Ira Weiny
|
090e77e166 |
kmap: consolidate kmap_prot definitions
Most architectures define kmap_prot to be PAGE_KERNEL. Let sparc and xtensa define there own and define PAGE_KERNEL as the default if not overridden. [akpm@linux-foundation.org: coding style fixes] Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200507150004.1423069-16-ira.weiny@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ira Weiny
|
abca2500c0 |
arch/kunmap_atomic: consolidate duplicate code
Every single architecture (including !CONFIG_HIGHMEM) calls... pagefault_enable(); preempt_enable(); ... before returning from __kunmap_atomic(). Lift this code into the kunmap_atomic() macro. While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to be consistent. [ira.weiny@intel.com: don't enable pagefault/preempt twice] Link: http://lkml.kernel.org/r/20200518184843.3029640-1-ira.weiny@intel.com [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20200507150004.1423069-8-ira.weiny@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ira Weiny
|
78b6d91ec7 |
arch/kmap_atomic: consolidate duplicate code
Every arch has the same code to ensure atomic operations and a check for !HIGHMEM page. Remove the duplicate code by defining a core kmap_atomic() which only calls the arch specific kmap_atomic_high() when the page is high memory. [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200507150004.1423069-7-ira.weiny@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ira Weiny
|
e23c45976f |
arch/kunmap: remove duplicate kunmap implementations
All architectures do exactly the same thing for kunmap(); remove all the duplicate definitions and lift the call to the core. This also has the benefit of changing kmap_unmap() on a number of architectures to be an inline call rather than an actual function. [akpm@linux-foundation.org: fix CONFIG_HIGHMEM=n build on various architectures] Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200507150004.1423069-5-ira.weiny@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ira Weiny
|
525aaf9bad |
arch/kmap: remove redundant arch specific kmaps
The kmap code for all the architectures is almost 100% identical. Lift the common code to the core. Use ARCH_HAS_KMAP_FLUSH_TLB to indicate if an arch defines kmap_flush_tlb() and call if if needed. This also has the benefit of changing kmap() on a number of architectures to be an inline call rather than an actual function. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200507150004.1423069-4-ira.weiny@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
84e6ffb2c4 |
arm: add support for folded p4d page tables
Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate, and remove __ARCH_USE_5LEVEL_HACK. [rppt@linux.ibm.com: fix kexec] Link: http://lkml.kernel.org/r/20200508174232.GA759899@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Anshuman Khandual
|
86ec2da037 |
mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid()
pmd_present() is expected to test positive after pmdp_mknotpresent() as the PMD entry still points to a valid huge page in memory. pmdp_mknotpresent() implies that given PMD entry is just invalidated from MMU perspective while still holding on to pmd_page() referred valid huge page thus also clearing pmd_present() test. This creates the following situation which is counter intuitive. [pmd_present(pmd_mknotpresent(pmd)) = true] This renames pmd_mknotpresent() as pmd_mkinvalid() reflecting the helper's functionality more accurately while changing the above mentioned situation as follows. This does not create any functional change. [pmd_present(pmd_mkinvalid(pmd)) = true] This is not applicable for platforms that define own pmdp_invalidate() via __HAVE_ARCH_PMDP_INVALIDATE. Suggestion for renaming came during a previous discussion here. https://patchwork.kernel.org/patch/11019637/ [anshuman.khandual@arm.com: change pmd_mknotvalid() to pmd_mkinvalid() per Will] Link: http://lkml.kernel.org/r/1587520326-10099-3-git-send-email-anshuman.khandual@arm.com Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Will Deacon <will@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/1584680057-13753-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Anshuman Khandual
|
5be9934328 |
mm/hugetlb: define a generic fallback for arch_clear_hugepage_flags()
There are multiple similar definitions for arch_clear_hugepage_flags() on various platforms. Lets just add it's generic fallback definition for platforms that do not override. This help reduce code duplication. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: http://lkml.kernel.org/r/1588907271-11920-4-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Anshuman Khandual
|
b0eae98c66 |
mm/hugetlb: define a generic fallback for is_hugepage_only_range()
There are multiple similar definitions for is_hugepage_only_range() on various platforms. Lets just add it's generic fallback definition for platforms that do not override. This help reduce code duplication. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: http://lkml.kernel.org/r/1588907271-11920-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
bce159d734 |
for-5.8/drivers-2020-06-01
-----BEGIN PGP SIGNATURE-----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=H+/Z
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"On top of the core changes, here are the block driver changes for this
merge window:
- NVMe changes:
- NVMe over Fibre Channel protocol updates, which also reach
over to drivers/scsi/lpfc (James Smart)
- namespace revalidation support on the target (Anthony
Iliopoulos)
- gcc zero length array fix (Arnd Bergmann)
- nvmet cleanups (Chaitanya Kulkarni)
- misc cleanups and fixes (me, Keith Busch, Sagi Grimberg)
- use a SRQ per completion vector (Max Gurtovoy)
- fix handling of runtime changes to the queue count (Weiping
Zhang)
- t10 protection information support for nvme-rdma and
nvmet-rdma (Israel Rukshin and Max Gurtovoy)
- target side AEN improvements (Chaitanya Kulkarni)
- various fixes and minor improvements all over, icluding the
nvme part of the lpfc driver"
- Floppy code cleanup series (Willy, Denis)
- Floppy contention fix (Jiri)
- Loop CONFIGURE support (Martijn)
- bcache fixes/improvements (Coly, Joe, Colin)
- q->queuedata cleanups (Christoph)
- Get rid of ioctl_by_bdev (Christoph, Stefan)
- md/raid5 allocation fixes (Coly)
- zero length array fixes (Gustavo)
- swim3 task state fix (Xu)"
* tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits)
bcache: configure the asynchronous registertion to be experimental
bcache: asynchronous devices registration
bcache: fix refcount underflow in bcache_device_free()
bcache: Convert pr_<level> uses to a more typical style
bcache: remove redundant variables i and n
lpfc: Fix return value in __lpfc_nvme_ls_abort
lpfc: fix axchg pointer reference after free and double frees
lpfc: Fix pointer checks and comments in LS receive refactoring
nvme: set dma alignment to qword
nvmet: cleanups the loop in nvmet_async_events_process
nvmet: fix memory leak when removing namespaces and controllers concurrently
nvmet-rdma: add metadata/T10-PI support
nvmet: add metadata support for block devices
nvmet: add metadata/T10-PI support
nvme: add Metadata Capabilities enumerations
nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len
nvmet: rename nvmet_rw_len to nvmet_rw_data_len
nvmet: add metadata characteristics for a namespace
nvme-rdma: add metadata/T10-PI support
nvme-rdma: introduce nvme_rdma_sgl structure
...
|
||
|
Linus Torvalds
|
4b01285e16 |
Merge branch 'uaccess.csum' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uaccess/csum updates from Al Viro:
"Regularize the sitation with uaccess checksum primitives:
- fold csum_partial_... into csum_and_copy_..._user()
- on x86 collapse several access_ok()/stac()/clac() into
user_access_begin()/user_access_end()"
* 'uaccess.csum' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
default csum_and_copy_to_user(): don't bother with access_ok()
take the dummy csum_and_copy_from_user() into net/checksum.h
arm: switch to csum_and_copy_from_user()
sh32: convert to csum_and_copy_from_user()
m68k: convert to csum_and_copy_from_user()
xtensa: switch to providing csum_and_copy_from_user()
sparc: switch to providing csum_and_copy_from_user()
parisc: turn csum_partial_copy_from_user() into csum_and_copy_from_user()
alpha: turn csum_partial_copy_from_user() into csum_and_copy_from_user()
ia64: turn csum_partial_copy_from_user() into csum_and_copy_from_user()
ia64: csum_partial_copy_nocheck(): don't abuse csum_partial_copy_from_user()
x86: switch 32bit csum_and_copy_to_user() to user_access_{begin,end}()
x86: switch both 32bit and 64bit to providing csum_and_copy_from_user()
x86_64: csum_..._copy_..._user(): switch to unsafe_..._user()
get rid of csum_partial_copy_to_user()
|