msm-next pull request has a baseline with stuff from -fixes, roll
forward first.
Some simple conflicts in amdgpu, ttm and one in i915 where git gets
confused and tries to add the same function twice.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This change introduces a prctl that allows the user program to control
which PAC keys are enabled in a particular task. The main reason
why this is useful is to enable a userspace ABI that uses PAC to
sign and authenticate function pointers and other pointers exposed
outside of the function, while still allowing binaries conforming
to the ABI to interoperate with legacy binaries that do not sign or
authenticate pointers.
The idea is that a dynamic loader or early startup code would issue
this prctl very early after establishing that a process may load legacy
binaries, but before executing any PAC instructions.
This change adds a small amount of overhead to kernel entry and exit
due to additional required instruction sequences.
On a DragonBoard 845c (Cortex-A75) with the powersave governor, the
overhead of similar instruction sequences was measured as 4.9ns when
simulating the common case where IA is left enabled, or 43.7ns when
simulating the uncommon case where IA is disabled. These numbers can
be seen as the worst case scenario, since in more realistic scenarios
a better performing governor would be used and a newer chip would be
used that would support PAC unlike Cortex-A75 and would be expected
to be faster than Cortex-A75.
On an Apple M1 under a hypervisor, the overhead of the entry/exit
instruction sequences introduced by this patch was measured as 0.3ns
in the case where IA is left enabled, and 33.0ns in the case where
IA is disabled.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://linux-review.googlesource.com/id/Ibc41a5e6a76b275efbaa126b31119dc197b927a5
Link: https://lore.kernel.org/r/d6609065f8f40397a4124654eb68c9f490b4d477.1616123271.git.pcc@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
'linux/blkdev.h' and 'uapi/linux/lightnvm.h' included in 'lightnvm.h'
is duplicated.It is also included in the 5th and 7th line.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Link: https://lore.kernel.org/r/20210413105257.159260-4-matias.bjorling@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In 'bpf_ringbuf_reserve()' we require the flag to '0' at the moment.
For 'bpf_ringbuf_{discard,submit,output}' a flag of '0' might send a
notification to the process if needed.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210412192434.944343-1-pctammela@mojatatu.com
Per net/bpf/test_run.c, particular prog types have additional
restrictions around the parameters that can be provided, so document
these in the header.
I didn't bother documenting the limitation on duration for raw
tracepoints since that's an output parameter anyway.
Tested with ./tools/testing/selftests/bpf/test_doc_build.sh.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210410174549.816482-1-joe@cilium.io
This adds two new POLL_ADD flags, IORING_POLL_UPDATE_EVENTS and
IORING_POLL_UPDATE_USER_DATA. As with the other POLL_ADD flag, these are
masked into sqe->len. If set, the POLL_ADD will have the following
behavior:
- sqe->addr must contain the the user_data of the poll request that
needs to be modified. This field is otherwise invalid for a POLL_ADD
command.
- If IORING_POLL_UPDATE_EVENTS is set, sqe->poll_events must contain the
new mask for the existing poll request. There are no checks for whether
these are identical or not, if a matching poll request is found, then it
is re-armed with the new mask.
- If IORING_POLL_UPDATE_USER_DATA is set, sqe->off must contain the new
user_data for the existing poll request.
A POLL_ADD with any of these flags set may complete with any of the
following results:
1) 0, which means that we successfully found the existing poll request
specified, and performed the re-arm procedure. Any error from that
re-arm will be exposed as a completion event for that original poll
request, not for the update request.
2) -ENOENT, if no existing poll request was found with the given
user_data.
3) -EALREADY, if the existing poll request was already in the process of
being removed/canceled/completing.
4) -EACCES, if an attempt was made to modify an internal poll request
(eg not one originally issued ass IORING_OP_POLL_ADD).
The usual -EINVAL cases apply as well, if any invalid fields are set
in the sqe for this command type.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The default io_uring poll mode is one-shot, where once the event triggers,
the poll command is completed and won't trigger any further events. If
we're doing repeated polling on the same file or socket, then it can be
more efficient to do multishot, where we keep triggering whenever the
event becomes true.
This deviates from the usual norm of having one CQE per SQE submitted. Add
a CQE flag, IORING_CQE_F_MORE, which tells the application to expect
further completion events from the submitted SQE. Right now the only user
of this is POLL_ADD in multishot mode.
Since sqe->poll_events is using the space that we normally use for adding
flags to commands, use sqe->len for the flag space for POLL_ADD. Multishot
mode is selected by setting IORING_POLL_ADD_MULTI in sqe->len. An
application should expect more CQEs for the specificed SQE if the CQE is
flagged with IORING_CQE_F_MORE. In multishot mode, only cancelation or an
error will terminate the poll request, in which case the flag will be
cleared.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Define get_module_eeprom_by_page() ethtool callback and implement
netlink infrastructure.
get_module_eeprom_by_page() allows network drivers to dump a part of
module's EEPROM specified by page and bank numbers along with offset and
length. It is effectively a netlink replacement for get_module_info()
and get_module_eeprom() pair, which is needed due to emergence of
complex non-linear EEPROM layouts.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add support to reset device after the user closes the file descriptor.
Because we support a single user, we can reset the device (if needs to)
after a user closes its file descriptor to make sure the device is in
idle and clean state for the next user.
- Add a new feature to allow the user to wait on interrupt. This is needed
for future ASICs
- Replace GFP_ATOMIC with GFP_KERNEL wherever possible and add code to
support failure of allocating with GFP_ATOMIC.
- Update code to support the latest firmware image:
- More security features are done in the firmware
- Remove hard-coded assumptions and replace them with values that are
sent to the firmware on loading.
- Print device unusable error
- Reset device in case the communication between driver and firmware
gets out of sync.
- Support new PCI device ids for secured GAUDI.
- Expose current power draw through the INFO IOCTL.
- Support resetting the device upon a request from the BMC (through F/W).
- Always use only a single MSI in GAUDI, due to H/W limitation.
- Improve data-path code by taking out code from spinlock protection.
- Allow user to specify custom timeout per Command Submission.
- Some enhancements to debugfs.
- Various minor changes and improvements.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEE7TEboABC71LctBLFZR1NuKta54AFAmByAxcTHG9nYWJiYXlA
a2VybmVsLm9yZwAKCRBlHU24q1rngLzgB/4gkltBLgkp+VaIK+fb7uB34CY096M1
e8iO7eqxjrjW3YymBaHVYVuaogv9/XD1pUap/rsvw4Ytvb3g390wLjHhsHcSW0AM
8gIswu0VqWWrxphe0ns+ArV4j6JWVBkUQ1QDxp9Ut0qMaUZha/EkfAengMseQbjR
3oaPwrUCpPpl4XfZaBTxTg3RyHtXnzi3cFw2b207D9iX8DS69TtLgMPAj5xN4vO2
lei/4ZRJw/MbJSwvmNJt2d7E7CniLQh9sy7JnMeinpG+WD4GMdx1m0bI8fIuKQ11
GkvVRREGHuQ0YtvTIWi9K+GAwJNqIIw/cW8M3+P1+7WjLWAKkyOTtYk5
=ZHBU
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-next-2021-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains habanalabs driver changes for v5.13:
- Add support to reset device after the user closes the file descriptor.
Because we support a single user, we can reset the device (if needs to)
after a user closes its file descriptor to make sure the device is in
idle and clean state for the next user.
- Add a new feature to allow the user to wait on interrupt. This is needed
for future ASICs
- Replace GFP_ATOMIC with GFP_KERNEL wherever possible and add code to
support failure of allocating with GFP_ATOMIC.
- Update code to support the latest firmware image:
- More security features are done in the firmware
- Remove hard-coded assumptions and replace them with values that are
sent to the firmware on loading.
- Print device unusable error
- Reset device in case the communication between driver and firmware
gets out of sync.
- Support new PCI device ids for secured GAUDI.
- Expose current power draw through the INFO IOCTL.
- Support resetting the device upon a request from the BMC (through F/W).
- Always use only a single MSI in GAUDI, due to H/W limitation.
- Improve data-path code by taking out code from spinlock protection.
- Allow user to specify custom timeout per Command Submission.
- Some enhancements to debugfs.
- Various minor changes and improvements.
* tag 'misc-habanalabs-next-2021-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (41 commits)
habanalabs: print f/w boot unknown error
habanalabs: update to latest F/W communication header
habanalabs/gaudi: skip iATU if F/W security is enabled
habanalabs/gaudi: derive security status from pci id
habanalabs: move dram scrub to free sequence
habanalabs: send dynamic msi-x indexes to f/w
habanalabs/gaudi: clear QM errors only if not in stop_on_err mode
habanalabs: support DEVICE_UNUSABLE error indication from FW
habanalabs: use strscpy instead of sprintf and strlcpy
habanalabs: remove the store jobs array from CS IOCTL
habanalabs/gaudi: add debugfs to DMA from the device
habanalabs/gaudi: sync stream add protection to SOB reset flow
habanalabs: add custom timeout flag per cs
habanalabs: improve utilization calculation
habanalabs: support legacy and new pll indexes
habanalabs: move relevant datapath work outside cs lock
habanalabs: avoid soft lockup bug upon mapping error
habanalabs/gaudi: Update async events header
habanalabs/gaudi: unsecure TPC cfg status registers
habanalabs/gaudi: always use single-msi mode
...
When async binder buffer got exhausted, some normal oneway transactions
will also be discarded and may cause system or application failures. By
that time, the binder debug information we dump may not be relevant to
the root cause. And this issue is difficult to debug if without the
backtrace of the thread sending spam.
This change will send BR_ONEWAY_SPAM_SUSPECT to userspace when oneway
spamming is detected, request to dump current backtrace. Oneway spamming
will be reported only once when exceeding the threshold (target process
dips below 80% of its oneway space, and current process is responsible for
either more than 50 transactions, or more than 50% of the oneway space).
And the detection will restart when the async buffer has returned to a
healthy state.
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Hang Lu <hangl@codeaurora.org>
Link: https://lore.kernel.org/r/1617961246-4502-3-git-send-email-hangl@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Callout devices are long-gone, but the ASYNC_SPLIT_TERMIOS flag was
never added to the deprecation mask.
Add it so that a warning is printed if it is ever used.
Fixes: 8a8ae62f82 ("tty: warn on deprecated serial flags")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-7-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some kernel-internal ASYNC flags have been superseded by tty-port flags
and should no longer be used by kernel drivers.
Fix the misspelled "__KERNEL__" compile guards which failed their sole
purpose to break out-of-tree drivers that have not yet been updated.
Fixes: 5c0517fefc ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mac80211, wireless, and bpf trees. No scary regressions here
or in the works, but small fixes for 5.12 changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params
from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding
the rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related
tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool
memory model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SHL0
-----END PGP SIGNATURE-----
Merge tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.12-rc7, including fixes from can, ipsec,
mac80211, wireless, and bpf trees.
No scary regressions here or in the works, but small fixes for 5.12
changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt"
* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
net: fix hangup on napi_disable for threaded napi
net: hns3: Trivial spell fix in hns3 driver
lan743x: fix ethernet frame cutoff issue
net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
net: dsa: lantiq_gswip: Don't use PHY auto polling
net: sched: sch_teql: fix null-pointer dereference
ipv6: report errors for iftoken via netlink extack
net: sched: fix err handler in tcf_action_init()
net: sched: fix action overwrite reference counting
Revert "net: sched: bump refcount for new action in ACT replace mode"
ice: fix memory leak of aRFS after resuming from suspend
i40e: Fix sparse warning: missing error code 'err'
i40e: Fix sparse error: 'vsi->netdev' could be null
i40e: Fix sparse error: uninitialized symbol 'ring'
i40e: Fix sparse errors in i40e_txrx.c
i40e: Fix parameters in aq_get_phy_register()
nl80211: fix beacon head validation
bpf, x86: Validate computation of branch displacements for x86-32
bpf, x86: Validate computation of branch displacements for x86-64
...
The store part was never implemented in the code and never been used
by the userspace applications.
We currently use the related parameters to a different purpose with
a defined union. However, there is no point in that and it is better
to just remove the union and the store parameters.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is a need to allow to user to send command submissions with
custom timeout as some CS take longer than the max timeout that is
used by default.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add driver implementation for reading the current power from the device
CPU F/W.
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support command submissions from user space, the driver
need to add support for user interrupt completions. The driver will
allow multiple user threads to wait for an interrupt and perform
a comparison with a given user address once interrupt expires.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
- Proper support for BCM4330 and BMC4334
- Various improvements for firmware download of Intel controllers
- Update management interface revision to 20
- Support for AOSP HCI vendor commands
- Initial Virtio support
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----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=jiCz
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2021-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Proper support for BCM4330 and BMC4334
- Various improvements for firmware download of Intel controllers
- Update management interface revision to 20
- Support for AOSP HCI vendor commands
- Initial Virtio support
====================
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add constants for 2.5G and 5G speed in PCS speed register into mdio.h.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enhance enum nl80211_tdls_peer_capability to configure TDLS peer's
support for HE mode. Userspace decodes the TDLS setup response frame
and confugures the HE mode support to driver if the peer has advertized
HE mode support in TDLS setup response frame. The driver uses this
information to decide whether to include HE operation IE in TDLS setup
confirmation frame.
Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
Link: https://lore.kernel.org/r/1614696636-30144-1-git-send-email-vamsin@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This adds support for Bluetooth HCI transport over virtio.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The docs were very sparse with how exactly CMD_ROAM should be
used. Specifically related to BSS information normally obtained
through a user space scan.
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Link: https://lore.kernel.org/r/20210311230333.103934-1-prestwoj@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Recompiling with the new extended version of struct rfkill_event
broke systemd in *two* ways:
- It used "sizeof(struct rfkill_event)" to read the event, but
then complained if it actually got something != 8, this broke
it on new kernels (that include the updated API);
- It used sizeof(struct rfkill_event) to write a command, but
didn't implement the intended expansion protocol where the
kernel returns only how many bytes it accepted, and errored
out due to the unexpected smaller size on kernels that didn't
include the updated API.
Even though systemd has now been fixed, that fix may not be always
deployed, and other applications could potentially have similar
issues.
As such, in the interest of avoiding regressions, revert the
default API "struct rfkill_event" back to the original size.
Instead, add a new "struct rfkill_event_ext" that extends it by
the new field, and even more clearly document that applications
should be prepared for extensions in two ways:
* write might only accept fewer bytes on older kernels, and
will return how many to let userspace know which data may
have been ignored;
* read might return anything between 8 (the original size) and
whatever size the application sized its buffer at, indicating
how much event data was supported by the kernel.
Perhaps that will help avoid such issues in the future and we
won't have to come up with another version of the struct if we
ever need to extend it again.
Applications that want to take advantage of the new field will
have to be modified to use struct rfkill_event_ext instead now,
which comes with the danger of them having already been updated
to use it from 'struct rfkill_event', but I found no evidence
of that, and it's still relatively new.
Cc: stable@vger.kernel.org # 5.11
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-r4 (x86-64)
Link: https://lore.kernel.org/r/20210319232510.f1a139cfdd9c.Ic5c7c9d1d28972059e132ea653a21a427c326678@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix remaining issues with kdoc in the ethtool headers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a note on expected handling of reserved fields,
and references to all kdocs. This fixes a bunch
of kdoc warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extended link state structures and enums use kdoc headers
but then do not describe any of the members.
Convert to normal comments.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Performance counts, and ALWAYS_ON counters used for capturing GPU
timestamps, lose their state across suspend/resume cycles. Userspace
tooling for performance monitoring needs to be aware of this. For
example, after a suspend userspace needs to recalibrate it's offset
between CPU and GPU time.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210325012358.1759770-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Implement the hypervisor side of the KVM PTP interface.
The service offers wall time and cycle count from host to guest.
The caller must specify whether they want the host's view of
either the virtual or physical counter.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201209060932.212364-7-jianyong.wu@arm.com
This driver never had any open userspace (which for VFIO would include
VM kernel drivers) that use it, and thus should never have been added
by our normal userspace ABI rules.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20210326061311.1497642-2-hch@lst.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add Colorimetry control class for colorimetry controls
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Long Term Reference (LTR) frames are the frames that are encoded
sometime in the past and stored in the DPB buffer list to be used
as reference to encode future frames.
This change adds controls to enable this feature.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Modify the documentation to point out which flags and structs are
used to configure the statistics.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
CoreSight PMU supports aux-buffer for the ETM tracing. The trace
generated by the ETM (associated with individual CPUs, like Intel PT)
is captured by a separate IP (CoreSight TMC-ETR/ETF until now).
The TMC-ETR applies formatting of the raw ETM trace data, as it
can collect traces from multiple ETMs, with the TraceID to indicate
the source of a given trace packet.
Arm Trace Buffer Extension is new "sink" IP, attached to individual
CPUs and thus do not provide additional formatting, like TMC-ETR.
Additionally, a system could have both TRBE *and* TMC-ETR for
the trace collection. e.g, TMC-ETR could be used as a single
trace buffer to collect data from multiple ETMs to correlate
the traces from different CPUs. It is possible to have a
perf session where some events end up collecting the trace
in TMC-ETR while the others in TRBE. Thus we need a way
to identify the type of the trace for each AUX record.
Define the trace formats exported by the CoreSight PMU.
We don't define the flags following the "ETM" as this
information is available to the user when issuing
the session. What is missing is the additional
formatting applied by the "sink" which is decided
at the runtime and the user may not have a control on.
So we define :
- CORESIGHT format (indicates the Frame format)
- RAW format (indicates the format of the source)
The default value is CORESIGHT format for all the records
(i,e == 0). Add the RAW format for others that use
raw format.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-3-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Allocate a byte for advertising the PMU specific format type
of the given AUX record. A PMU could end up providing hardware
trace data in multiple format in a single session.
e.g, The format of hardware buffer produced by CoreSight ETM
PMU depends on the type of the "sink" device used for collection
for an event (Traditional TMC-ETR/Bs with formatting or
TRBEs without any formatting).
# Boring story of why this is needed. Goto The_End_of_Story for skipping.
CoreSight ETM trace allows instruction level tracing of Arm CPUs.
The ETM generates the CPU excecution trace and pumps it into CoreSight
AMBA Trace Bus and is collected by a different CoreSight component
(traditionally CoreSight TMC-ETR /ETB/ETF), called "sink".
Important to note that there is no guarantee that every CPU has
a dedicated sink. Thus multiple ETMs could pump the trace data
into the same "sink" and thus they apply additional formatting
of the trace data for the user to decode it properly and attribute
the trace data to the corresponding ETM.
However, with the introduction of Arm Trace buffer Extensions (TRBE),
we now have a dedicated per-CPU architected sink for collecting the
trace. Since the TRBE is always per-CPU, it doesn't apply any formatting
of the trace. The support for this driver is under review [1].
Now a system could have a per-cpu TRBE and one or more shared
TMC-ETRs on the system. A user could choose a "specific" sink
for a perf session (e.g, a TMC-ETR) or the driver could automatically
select the nearest sink for a given ETM. It is possible that
some ETMs could end up using TMC-ETR (e.g, if the TRBE is not
usable on the CPU) while the others using TRBE in a single
perf session. Thus we now have "formatted" trace collected
from TMC-ETR and "unformatted" trace collected from TRBE.
However, we don't get into a situation where a single event
could end up using TMC-ETR & TRBE. i.e, any AUX buffer is
guaranteed to be either RAW or FORMATTED, but not a mix
of both.
As for perf decoding, we need to know the type of the data
in the individual AUX buffers, so that it can set up the
"OpenCSD" (library for decoding CoreSight trace) decoder
instance appropriately. Thus the perf.data file must conatin
the hints for the tool to decode the data correctly.
Since this is a runtime variable, and perf tool doesn't have
a control on what sink gets used (in case of automatic sink
selection), we need this information made available from
the PMU driver for each AUX record.
# The_End_of_Story
Cc: Peter Ziljstra <peterz@infradead.org>
Cc: alexander.shishkin@linux.intel.com
Cc: mingo@redhat.com
Cc: will@kernel.org
Cc: mark.rutland@arm.com
Cc: mike.leach@linaro.org
Cc: acme@kernel.org
Cc: jolsa@redhat.com
Cc: Mathieu Poirier <mathieu.poirer@linaro.org>
Reviewed by: Mike Leach <mike.leach@linaro.org>
Acked-by: Peter Ziljstra <peterz@infradead.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-2-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
-----BEGIN PGP SIGNATURE-----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=8odY
-----END PGP SIGNATURE-----
Merge tag 'block-5.12-2021-04-02' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Remove comment that never came to fruition in 22 years of development
(Christoph)
- Remove unused request flag (Christoph)
- Fix for null_blk fake timeout handling (Damien)
- Fix for IOCB_NOWAIT being ignored for O_DIRECT on raw bdevs (Pavel)
- Error propagation fix for multiple split bios (Yufen)
* tag 'block-5.12-2021-04-02' of git://git.kernel.dk/linux-block:
block: remove the unused RQF_ALLOCED flag
block: update a few comments in uapi/linux/blkpg.h
block: don't ignore REQ_NOWAIT for direct IO
null_blk: fix command timeout completion handling
block: only update parent bi_status when bio fail
The MPTCP reset option allows to carry a mptcp-specific error code that
provides more information on the nature of a connection reset.
Reset option data received gets stored in the subflow context so it can
be sent to userspace via the 'subflow closed' netlink event.
When a subflow is closed, the desired error code that should be sent to
the peer is also placed in the subflow context structure.
If a reset is sent before subflow establishment could complete, e.g. on
HMAC failure during an MP_JOIN operation, the mptcp skb extension is
used to store the reset information.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-01
The following pull-request contains BPF updates for your *net-next* tree.
We've added 68 non-merge commits during the last 7 day(s) which contain
a total of 70 files changed, 2944 insertions(+), 1139 deletions(-).
The main changes are:
1) UDP support for sockmap, from Cong.
2) Verifier merge conflict resolution fix, from Daniel.
3) xsk selftests enhancements, from Maciej.
4) Unstable helpers aka kernel func calling, from Martin.
5) Batches ops for LPM map, from Pedro.
6) Fix race in bpf_get_local_storage, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The big top of the file comment talk about grand plans that never
happened, so remove them to not confuse the readers. Also mark the
devname and volname fields as ignored as they were never used by the
kernel.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reusing BPF_SK_SKB_STREAM_VERDICT is possible but its name is
confusing and more importantly we still want to distinguish them
from user-space. So we can just reuse the stream verdict code but
introduce a new type of eBPF program, skb_verdict. Users are not
allowed to attach stream_verdict and skb_verdict programs to the
same map.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-10-xiyou.wangcong@gmail.com
Add FEC API to netlink.
This is not a 1-to-1 conversion.
FEC settings already depend on link modes to tell user which
modes are supported. Take this further an use link modes for
manual configuration. Old struct ethtool_fecparam is still
used to talk to the drivers, so we need to translate back
and forth. We can revisit the internal API if number of FEC
encodings starts to grow.
Enforce only one active FEC bit (by using a bit position
rather than another mask).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Conversion to dma_resv_locking, obj->mm.lock is gone (Maarten, with
help from Thomas Hellström)
- watchdog (Tvrtko, one patch to cancel individual request from Chris)
- legacy ioctl cleanup (Jason+Ashutosh)
- i915-gem TODO and RFC process doc (me)
- i915_ prefix for vma_lookup (Liam Howlett) just because I spotted it
and put it in here too
-----BEGIN PGP SIGNATURE-----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=P0yC
-----END PGP SIGNATURE-----
Merge tag 'topic/i915-gem-next-2021-03-26' of ssh://git.freedesktop.org/git/drm/drm into drm-next
special i915-gem-next pull as requested
- Conversion to dma_resv_locking, obj->mm.lock is gone (Maarten, with
help from Thomas Hellström)
- watchdog (Tvrtko, one patch to cancel individual request from Chris)
- legacy ioctl cleanup (Jason+Ashutosh)
- i915-gem TODO and RFC process doc (me)
- i915_ prefix for vma_lookup (Liam Howlett) just because I spotted it
and put it in here too
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YF24MHoOSjpKFEXA@phenom.ffwll.local
Add definitions for the ICMPV6 type of Extended Echo Request and
Extended Echo Reply, as defined by sections 2 and 3 of RFC 8335.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add definitions for PROBE ICMP types and codes.
Add AFI definitions for IP and IPV6 as specified by IANA
Add a struct to represent the additional header when probing by IP
address (ctype == 3) for use in parsing incoming PROBE messages
Add a struct to represent the entire Interface Identification Object
(IIO) section of an incoming PROBE packet
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmBjRuQOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE9ZQw/6Ao2X1io4TVnyO/gO8HtwmnZ6TWcrLUlySaep
H6Suf0RHsOQO9VOaMcUarA3Wnz1vZ44qJ/fkdLTslnIPGSRJDUx15bbb+n2N6pQJ
gS7Umxy6n73rQyEoDjd3ZorvDGjFSVFpjM+RYjk/Ohq+yziz7nQ/SZuHPPeqm1GU
C5d9SxyXGdqlJJ6yFCHzbtjSmIey+l1TZ+j3rSSww/CzDKxB2l5J6JZAMUjVdL9b
J80Mcw0XLdG9iTtEnkUt3TwvLMcMl95UPeQHIkVQlwsRRb3BtHNIwJLPQ/n+Cou7
Hre3y2miUYHrNICEzMdMlpDzQBqu5wvpXgbgIV0CwAwCXPZBVWE1hVJ9gG0l+r1G
fy1a75OmEin4V9g8w+wNTWDEgjwAOkWhA67WVjpbvHtd6kEbISzt4JHFksG1rjU2
vXOIj2VBmQN6zHtxfcZqY8Ge4A7XGo7tAM/3NsUxin+2y7ZXI6sDvv+0esYmqrYr
9as/tD84L5LTrbUYewaUgEdauQXluQI1egRi7pSeg7hZyLeYYkmszk54Ra3zdlmM
m7Hr6u+Y/G7yeFdn/WdeG3VzdmxhC2ZFfk3gq0vneBS3WrATbf6nAORp2bwzGSz4
pUsVLSv+vhpZdSF+IxpUuMnsLkkbUCvFivXLjQ6irSWvp7uts1HWdRowdg7Pe2lC
FVbFRuA=
=1uM7
-----END PGP SIGNATURE-----
Merge tag 'tags/mute-led-rework' into for-next
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In commit ea7800565a ("can: add optional DLC element to Classical
CAN frame structure") the struct can_frame::can_dlc was put into an
anonymous union with another u8 variable.
For various reasons some members in struct can_frame and canfd_frame
including the first 8 byes of data are expected to have the same
memory layout. This is enforced by a BUILD_BUG_ON check in af_can.c.
Since the above mentioned commit this check fails on ARM kernels
compiled with the ARM OABI (which means CONFIG_AEABI not set). In this
case -mabi=apcs-gnu is passed to the compiler, which leads to a
structure size boundary of 32, instead of 8 compared to CONFIG_AEABI
enabled. This means the the union in struct can_frame takes 4 bytes
instead of the expected 1.
Rong Chen illustrates the problem with pahole in the ARM OABI case:
| struct can_frame {
| canid_t can_id; /* 0 4 */
| union {
| __u8 len; /* 4 1 */
| __u8 can_dlc; /* 4 1 */
| }; /* 4 4 */
| __u8 __pad; /* 8 1 */
| __u8 __res0; /* 9 1 */
| __u8 len8_dlc; /* 10 1 */
|
| /* XXX 5 bytes hole, try to pack */
|
| __u8 data[8]
| __attribute__((__aligned__(8))); /* 16 8 */
|
| /* size: 24, cachelines: 1, members: 6 */
| /* sum members: 19, holes: 1, sum holes: 5 */
| /* forced alignments: 1, forced holes: 1, sum forced holes: 5 */
| /* last cacheline: 24 bytes */
| } __attribute__((__aligned__(8)));
Marking the anonymous union as __attribute__((packed)) fixes the
BUILD_BUG_ON problem on these compilers.
Fixes: ea7800565a ("can: add optional DLC element to Classical CAN frame structure")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Rong Chen <rong.a.chen@intel.com>
Link: https://lore.kernel.org/linux-can/2c82ec23-3551-61b5-1bd8-178c3407ee83@hartkopp.net/
Link: https://lore.kernel.org/r/20210325125850.1620-3-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This may sound like a contradiction but some SPI-NOR flashes really
support erasing their OTP region until it is finally locked. Having the
possibility to erase an OTP region might come in handy during
development.
The ioctl argument follows the OTPLOCK style.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210303201819.2752-1-michael@walle.cc
This patch adds support to BPF verifier to allow bpf program calling
kernel function directly.
The use case included in this set is to allow bpf-tcp-cc to directly
call some tcp-cc helper functions (e.g. "tcp_cong_avoid_ai()"). Those
functions have already been used by some kernel tcp-cc implementations.
This set will also allow the bpf-tcp-cc program to directly call the
kernel tcp-cc implementation, For example, a bpf_dctcp may only want to
implement its own dctcp_cwnd_event() and reuse other dctcp_*() directly
from the kernel tcp_dctcp.c instead of reimplementing (or
copy-and-pasting) them.
The tcp-cc kernel functions mentioned above will be white listed
for the struct_ops bpf-tcp-cc programs to use in a later patch.
The white listed functions are not bounded to a fixed ABI contract.
Those functions have already been used by the existing kernel tcp-cc.
If any of them has changed, both in-tree and out-of-tree kernel tcp-cc
implementations have to be changed. The same goes for the struct_ops
bpf-tcp-cc programs which have to be adjusted accordingly.
This patch is to make the required changes in the bpf verifier.
First change is in btf.c, it adds a case in "btf_check_func_arg_match()".
When the passed in "btf->kernel_btf == true", it means matching the
verifier regs' states with a kernel function. This will handle the
PTR_TO_BTF_ID reg. It also maps PTR_TO_SOCK_COMMON, PTR_TO_SOCKET,
and PTR_TO_TCP_SOCK to its kernel's btf_id.
In the later libbpf patch, the insn calling a kernel function will
look like:
insn->code == (BPF_JMP | BPF_CALL)
insn->src_reg == BPF_PSEUDO_KFUNC_CALL /* <- new in this patch */
insn->imm == func_btf_id /* btf_id of the running kernel */
[ For the future calling function-in-kernel-module support, an array
of module btf_fds can be passed at the load time and insn->off
can be used to index into this array. ]
At the early stage of verifier, the verifier will collect all kernel
function calls into "struct bpf_kfunc_desc". Those
descriptors are stored in "prog->aux->kfunc_tab" and will
be available to the JIT. Since this "add" operation is similar
to the current "add_subprog()" and looking for the same insn->code,
they are done together in the new "add_subprog_and_kfunc()".
In the "do_check()" stage, the new "check_kfunc_call()" is added
to verify the kernel function call instruction:
1. Ensure the kernel function can be used by a particular BPF_PROG_TYPE.
A new bpf_verifier_ops "check_kfunc_call" is added to do that.
The bpf-tcp-cc struct_ops program will implement this function in
a later patch.
2. Call "btf_check_kfunc_args_match()" to ensure the regs can be
used as the args of a kernel function.
3. Mark the regs' type, subreg_def, and zext_dst.
At the later do_misc_fixups() stage, the new fixup_kfunc_call()
will replace the insn->imm with the function address (relative
to __bpf_call_base). If needed, the jit can find the btf_func_model
by calling the new bpf_jit_find_kfunc_model(prog, insn).
With the imm set to the function address, "bpftool prog dump xlated"
will be able to display the kernel function calls the same way as
it displays other bpf helper calls.
gpl_compatible program is required to call kernel function.
This feature currently requires JIT.
The verifier selftests are adjusted because of the changes in
the verbose log in add_subprog_and_kfunc().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015142.1544736-1-kafai@fb.com
kdoc does not have good support for documenting defines,
and we can't abuse the enum documentation because it
generates warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct ethtool_fecparam::reserved can't be used in SET, because
ethtool user space doesn't zero-initialize the structure.
Make this clear.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When LVM needs to find a device with a particular UUID it needs to ask for
UUID for each device. This patch returns UUID directly in the list of
devices, so that LVM doesn't have to query all the devices with an ioctl.
The UUID is returned if the flag DM_UUID_FLAG is set in the parameters.
Returning UUID is done in backward-compatible way. There's one unused
32-bit word value after the event number. This patch sets the bit
DM_NAME_LIST_FLAG_HAS_UUID if UUID is present and
DM_NAME_LIST_FLAG_DOESNT_HAVE_UUID if it isn't (if none of these bits is
set, then we have an old kernel that doesn't support returning UUIDs). The
UUID is stored after this word. The 'next' value is updated to point after
the UUID, so that old version of libdevmapper will skip the UUID without
attempting to interpret it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
amd-drm-next-5.13-2021-03-23:
amdgpu:
- Debugfs cleanup
- Various cleanups and spelling fixes
- Flexible array cleanups
- Initial AMD Freesync HDMI
- Display fixes
- 10bpc dithering improvements
- Display ASSR support
- Clean up and unify powerplay and swsmu interfaces
- Vangogh fixes
- Add SMU gfx busy queues for RV/PCO
- PCIE DPM fixes
- S0ix fixes
- GPU metrics data fixes
- DCN secure display support
- Backlight type override
- Add initial support for Aldebaran
- RAS fixes
- Prime fixes for A+A systems
- Reset fixes
- Initial resource cursor support
- Drop legacy IO BAR requirements
- Various power fixes
amdkfd:
- MMU notifier fixes
- APU fixes
radeon:
- Debugfs cleanups
- Flexible array cleanups
UAPI:
- amdgpu: Add a new INFO ioctl interface to query video capabilities
rather than hardcoding them in userspace. This allows us to provide
fine grained asic capabilities (e.g., if a particular part is
bandwidth limited, we can limit the capabilities). Proposed userspace:
https://gitlab.freedesktop.org/leoliu/drm/-/commits/info_video_capshttps://gitlab.freedesktop.org/leoliu/mesa/-/commits/info_video_caps
- amdkfd: bump the driver version. There was a problem with reporting
some RAS features on older versions of the driver. Proposed userspace:
7cdd63475c
Danvet: A bunch of conflicts all over, but it seems to compile ... I
did put the call to dc_allow_idle_optimizations() on a single line
since it looked a bit too jarring to be left alone.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324040147.1990338-1-alexander.deucher@amd.com
Big set in here from Alexandru Ardelean enabling multiple buffer support.
This includes providing a new directory per buffer that combines
what was previously in buffer/ and scan_elements/. Old interfaces still
in place for compatiblity.
Note immuatable branch for scmi patches to allow for some significant
rework going on in that subsystem. Merge required updating to reflect
some changes in IIO.
Late rebase to fix some wrong fixes tags due to some earlier rebases
made necessary by messing up the immutable branch.
IIO New Device Support
* adi,ad5686
- Add info to support AD5673R and AD5677R
* bosch,bmi088
- New driver supporting this accelerometer + gyroscope
* cros_ec_mkbp
- New driver for this proximity sensor that exposes a 'front'
sensor. Very simple switch like device, but driver allows it
to share interface with more sophisticated proximity sensors.
* iio_scmi
- New driver to support ARM SCMI protocol to expose underlying
accelerometers and gyroscopes via this firmware interface.
* st,st_magn
- Add ID for IISMDC magnetometer.
* ti,ads131e0
- New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs
Counter New Device Support
* IRQ or GPIO based counter
- New driver for a conceptually simple counter that uses interrupts
to perform the count.
Features
* core
- Dual buffer supprt including:
Various helpers to centralize handling of bufferer related elements.
Document existing and new IOCTLs
Register the IIO chrdev only if it can actually be used for anything.
Rework attribute group creation in the core (lots of patches)
Merge buffer/ and scan_elements/ entries into one list + maintain
backwards compatible set.
Introduce the internal logic and IOCTL to allow multiple buffers
+ access to an anon FD per buffer to actually read from it.
Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
Update ABI docs.
A few follow up fixes, unsuprising as this was a huge bit of rework.
- Move common case setting of trig->parent to the core.
- Provide an iio_read_channel_processed_scale() to avoid loss of
precision from iio_read_channel_processed() then applying integer
scale. Use it in ntc_thermistor driver in hwmon.
- Allow drivers to specify labels from elsewhere than DT. Use it for
bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
- Document label usage for proximity and accelerometer sensors.
- Some local variable renames for consistency
tools
- Add -a parameter to iio_event_monitor to allow autoenabling of events.
* acpi_als
- Add trigger support for devices that don't support notification method.
* adi,ad7124
- Allow more than 8 channels. This is a complex little device, but is
capable of supporting up to 16 channels if the share certain
configuration settings.
* hrtimer-trigger
- Support sampling frequency below 1Hz.
* mediatek,mt8195-auxadc
- Add compatible to binding docs (always also includes mt8173)
* st,stm32-adc
- Enable timetamps when not using DMA.
* vishay,vcnl3020
- Sampling frequency control.
Cleanup and minor fixes:
* treewide
- Use some getter and setter functions instead of opencoding.
- Set of fixes for pointless casts in various drivers.
- Avoid wrong kernel-doc marking on comment blocks.
- Fix various other minor kernel-doc issues shown by W=1
* core
- Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
- Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
- Add unit tests for iio_format_value()
* docs
- Fix formatting/typos in iio_configfs.rst and buffers.rst
- Add documentation of index in buffers.rst
- Fix scan element description
- Avoid some issues with HTML generation from ABI docs by moving
duplicated defintions to more generic files.
- Drop reference to long dead mailing list.
* 104-quad
- Remove left over deprecated IIO counter ABI.
* adi,adi-axi-adc
- Fix wrong bit of docs.
* adi,ad5791
- Typos
* adi,ad9834
- Switch to device managed functions in probe.
* adi,adis*
- Add and use helpers for locking to reduced duplication.
* adi,adis16480
- Fix calculation of sampling frequency when using pulse per second input.
* adi,adis16475
- Calculate the IMU scaled internal sampling rate and runtime depending
on sysfs based configuration rather than getting from DT. Drop now
unnecessary property from DT bindings doc.
* cros_ec
- Fix result of a series of recent changes that means extended buffer
attributes turn up in the wrong place. Too complex to revert the
various patches unfortunately so this is a bit messy.
* fsl,mma3452
- Indentation cleanup.
* hid-sensors
- Size of storage needs to increase for some parts when using quaternions.
- Move the get sensistivity attribute to hid-sensors-common to reduce
duplication. Enable it for more device types.
- Correctly handle relative sensitivity if reported that way including
documenting the new ABI.
* maxim,max517
- Use device managed functions in probe.
* mediatek,mt6360-adc
- Use asm/unaligned.h instead of directly including
unaligned/be_byteshift.h
* novuton,npcm-adc
- Local lock instead of missusing mlock.
* semtech,sx9500
- Typos
* st,sensor
- typo fix
* st,spear-adc
- Local lock instead of missusing mlock.
* st,stm32-adc
- Long standing HAS_IOMEM dependency fix.
* st,stm32-counter
- Remove left over deprecated IIO counter ABI.
* ti,palmas-adc
- Local lock instead of missusing mlock.
* ti,tmp007
- Switch to device managed functions in probe.
Other
* MAINTAINERS
- Move Peter Meerwald-Stadler to Credits at his request
-----BEGIN PGP SIGNATURE-----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=jeRJ
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
1st set of IIO/counter device support, features and cleanup in the 5.13 cycle
Big set in here from Alexandru Ardelean enabling multiple buffer support.
This includes providing a new directory per buffer that combines
what was previously in buffer/ and scan_elements/. Old interfaces still
in place for compatiblity.
Note immuatable branch for scmi patches to allow for some significant
rework going on in that subsystem. Merge required updating to reflect
some changes in IIO.
Late rebase to fix some wrong fixes tags due to some earlier rebases
made necessary by messing up the immutable branch.
IIO New Device Support
* adi,ad5686
- Add info to support AD5673R and AD5677R
* bosch,bmi088
- New driver supporting this accelerometer + gyroscope
* cros_ec_mkbp
- New driver for this proximity sensor that exposes a 'front'
sensor. Very simple switch like device, but driver allows it
to share interface with more sophisticated proximity sensors.
* iio_scmi
- New driver to support ARM SCMI protocol to expose underlying
accelerometers and gyroscopes via this firmware interface.
* st,st_magn
- Add ID for IISMDC magnetometer.
* ti,ads131e0
- New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs
Counter New Device Support
* IRQ or GPIO based counter
- New driver for a conceptually simple counter that uses interrupts
to perform the count.
Features
* core
- Dual buffer supprt including:
Various helpers to centralize handling of bufferer related elements.
Document existing and new IOCTLs
Register the IIO chrdev only if it can actually be used for anything.
Rework attribute group creation in the core (lots of patches)
Merge buffer/ and scan_elements/ entries into one list + maintain
backwards compatible set.
Introduce the internal logic and IOCTL to allow multiple buffers
+ access to an anon FD per buffer to actually read from it.
Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
Update ABI docs.
A few follow up fixes, unsuprising as this was a huge bit of rework.
- Move common case setting of trig->parent to the core.
- Provide an iio_read_channel_processed_scale() to avoid loss of
precision from iio_read_channel_processed() then applying integer
scale. Use it in ntc_thermistor driver in hwmon.
- Allow drivers to specify labels from elsewhere than DT. Use it for
bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
- Document label usage for proximity and accelerometer sensors.
- Some local variable renames for consistency
tools
- Add -a parameter to iio_event_monitor to allow autoenabling of events.
* acpi_als
- Add trigger support for devices that don't support notification method.
* adi,ad7124
- Allow more than 8 channels. This is a complex little device, but is
capable of supporting up to 16 channels if the share certain
configuration settings.
* hrtimer-trigger
- Support sampling frequency below 1Hz.
* mediatek,mt8195-auxadc
- Add compatible to binding docs (always also includes mt8173)
* st,stm32-adc
- Enable timetamps when not using DMA.
* vishay,vcnl3020
- Sampling frequency control.
Cleanup and minor fixes:
* treewide
- Use some getter and setter functions instead of opencoding.
- Set of fixes for pointless casts in various drivers.
- Avoid wrong kernel-doc marking on comment blocks.
- Fix various other minor kernel-doc issues shown by W=1
* core
- Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
- Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
- Add unit tests for iio_format_value()
* docs
- Fix formatting/typos in iio_configfs.rst and buffers.rst
- Add documentation of index in buffers.rst
- Fix scan element description
- Avoid some issues with HTML generation from ABI docs by moving
duplicated defintions to more generic files.
- Drop reference to long dead mailing list.
* 104-quad
- Remove left over deprecated IIO counter ABI.
* adi,adi-axi-adc
- Fix wrong bit of docs.
* adi,ad5791
- Typos
* adi,ad9834
- Switch to device managed functions in probe.
* adi,adis*
- Add and use helpers for locking to reduced duplication.
* adi,adis16480
- Fix calculation of sampling frequency when using pulse per second input.
* adi,adis16475
- Calculate the IMU scaled internal sampling rate and runtime depending
on sysfs based configuration rather than getting from DT. Drop now
unnecessary property from DT bindings doc.
* cros_ec
- Fix result of a series of recent changes that means extended buffer
attributes turn up in the wrong place. Too complex to revert the
various patches unfortunately so this is a bit messy.
* fsl,mma3452
- Indentation cleanup.
* hid-sensors
- Size of storage needs to increase for some parts when using quaternions.
- Move the get sensistivity attribute to hid-sensors-common to reduce
duplication. Enable it for more device types.
- Correctly handle relative sensitivity if reported that way including
documenting the new ABI.
* maxim,max517
- Use device managed functions in probe.
* mediatek,mt6360-adc
- Use asm/unaligned.h instead of directly including
unaligned/be_byteshift.h
* novuton,npcm-adc
- Local lock instead of missusing mlock.
* semtech,sx9500
- Typos
* st,sensor
- typo fix
* st,spear-adc
- Local lock instead of missusing mlock.
* st,stm32-adc
- Long standing HAS_IOMEM dependency fix.
* st,stm32-counter
- Remove left over deprecated IIO counter ABI.
* ti,palmas-adc
- Local lock instead of missusing mlock.
* ti,tmp007
- Switch to device managed functions in probe.
Other
* MAINTAINERS
- Move Peter Meerwald-Stadler to Credits at his request
* tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (119 commits)
iio: acpi_als: Add trigger support
iio: acpi_als: Add local variable dev in probe
iio: acpi_als: Add timestamp channel
iio: adc: ad7292: Modify the bool initialization assignment
iio: cros: unify hw fifo attributes without API changes
iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant
iio: event_monitor: Enable events before monitoring
dt-bindings: iio: adc: Add compatible for Mediatek MT8195
iio:magnetometer: Add Support for ST IIS2MDC
dt-bindings: iio: st,st-sensors add IIS2MDC.
staging: iio: ad9832: kernel-doc fixes
iio:dac:max517.c: Use devm_iio_device_register()
iio:cros_ec_sensors: Fix a wrong function name in kernel doc.
iio: buffer: kfifo_buf: kernel-doc, typo in function name.
iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names.
iio: adc: adi-axi-adc: Drop false marking for kernel-doc
iio: adc: cpcap-adc: kernel-doc fix - that should be _ in structure name
iio: dac: ad5504: fix wrong part number in kernel-doc structure name.
iio: dac: ad5770r: kernel-doc fix case of letter R wrong in structure name
iio: adc: ti-adc084s021: kernel-doc fixes, missing function names
...
Kunpeng930 supports doorbell isolation to ensure that each queue
has an independent doorbell address space.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
struct ethtool_fecparam::active_fec is a GET-only field,
all in-tree drivers correctly ignore it on SET. Clear
the field on SET to avoid any confusion. Again, we can't
reject non-zero now since ethtool user space does not
zero-init the param correctly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct ethtool_fecparam::reserved is never looked at by the core.
Make sure it's actually 0. Unfortunately we can't return an error
because old ethtool doesn't zero-initialize the structure for SET.
On GET we can be more verbose, there are no in tree (ab)users.
Fix up the kdoc on the structure. Remove the mention of FEC
bypass. Seems like a niche thing to configure in the first
place.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Digging through the mailing list archive @autoneg was part
of the first version of the RFC, this left over comment was
pointed out twice in review but wasn't removed.
The sentence is an exact copy-paste from pauseparam.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/porte/the port/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Various fixes, all over:
1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu.
2) Always store the rx queue mapping in veth, from Maciej
Fijalkowski.
3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov.
4) Fix memory leak in octeontx2-af from Colin Ian King.
5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from
Yonghong Song.
6) Fix tx ptp stats in mlx5, from Aya Levin.
7) Check correct ip version in tun decap, fropm Roi Dayan.
8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit.
9) Work item memork leak in mlx5, from Shay Drory.
10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann.
11) Lack of preemptrion awareness in macvlan, from Eric Dumazet.
12) Fix data race in pxa168_eth, from Pavel Andrianov.
13) Range validate stab in red_check_params(), from Eric Dumazet.
14) Inherit vlan filtering setting properly in b53 driver, from
Florian Fainelli.
15) Fix rtnl locking in igc driver, from Sasha Neftin.
16) Pause handling fixes in igc driver, from Muhammad Husaini
Zulkifli.
17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits.
18) Use after free in qlcnic, from Lv Yunlong.
19) fix crash in fritzpci mISDN, from Tong Zhang.
20) Premature rx buffer reuse in igb, from Li RongQing.
21) Missing termination of ip[a driver message handler arrays, from
Alex Elder.
22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25
driver, from Xie He.
23) Use after free in c_can_pci_remove(), from Tong Zhang.
24) Uninitialized variable use in nl80211, from Jarod Wilson.
25) Off by one size calc in bpf verifier, from Piotr Krysiuk.
26) Use delayed work instead of deferrable for flowtable GC, from
Yinjun Zhang.
27) Fix infinite loop in NPC unmap of octeontx2 driver, from
Hariprasad Kelam.
28) Fix being unable to change MTU of dwmac-sun8i devices due to lack
of fifo sizes, from Corentin Labbe.
29) DMA use after free in r8169 with WoL, fom Heiner Kallweit.
30) Mismatched prototypes in isdn-capi, from Arnd Bergmann.
31) Fix psample UAPI breakage, from Ido Schimmel"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits)
psample: Fix user API breakage
math: Export mul_u64_u64_div_u64
ch_ktls: fix enum-conversion warning
octeontx2-af: Fix memory leak of object buf
ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation
net: bridge: don't notify switchdev for local FDB addresses
net/sched: act_ct: clear post_ct if doing ct_clear
net: dsa: don't assign an error value to tag_ops
isdn: capi: fix mismatched prototypes
net/mlx5: SF, do not use ecpu bit for vhca state processing
net/mlx5e: Fix division by 0 in mlx5e_select_queue
net/mlx5e: Fix error path for ethtool set-priv-flag
net/mlx5e: Offload tuple rewrite for non-CT flows
net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP
net/mlx5: Add back multicast stats for uplink representor
net: ipconfig: ic_dev can be NULL in ic_close_devs
MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one
docs: networking: Fix a typo
r8169: fix DMA being used after buffer free if WoL is enabled
net: ipa: fix init header command validation
...
Cited commit added a new attribute before the existing group reference
count attribute, thereby changing its value and breaking existing
applications on new kernels.
Before:
# psample -l
libpsample ERROR psample_group_foreach: failed to recv message: Operation not supported
After:
# psample -l
Group Num Refcount Group Seq
1 1 0
Fix by restoring the value of the old attribute and remove the
misleading comments from the enumerator to avoid future bugs.
Cc: stable@vger.kernel.org
Fixes: d8bed686ab ("net: psample: Add tunnel support")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Adiel Bidani <adielb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- The Open Routing (Open/R) network protocol netlink handler uses ID 99
- Will also add to `/etc/iproute2/rt_protos` once this is accepted
- For more information: https://github.com/facebook/openr
Signed-off-by: From: Cooper Lees <me@cooperlees.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User space needs to know if binder transactions occurred to frozen
processes. Introduce a new BINDER_GET_FROZEN ioctl and keep track of
transactions occurring to frozen proceses.
Signed-off-by: Marco Ballesio <balejs@google.com>
Signed-off-by: Li Li <dualli@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20210316011630.1121213-4-dualli@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frozen tasks can't process binder transactions, so a way is required to
inform transmitting ends of communication failures due to the frozen
state of their receiving counterparts. Additionally, races are possible
between transitions to frozen state and binder transactions enqueued to
a specific process.
Implement BINDER_FREEZE ioctl for user space to inform the binder driver
about the intention to freeze or unfreeze a process. When the ioctl is
called, block the caller until any pending binder transactions toward
the target process are flushed. Return an error to transactions to
processes marked as frozen.
Co-developed-by: Todd Kjos <tkjos@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Marco Ballesio <balejs@google.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Li Li <dualli@google.com>
Link: https://lore.kernel.org/r/20210316011630.1121213-2-dualli@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the license boilerplate (containing an obsolete address), because
we now have the SPDX header.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210322141748.1062733-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Indicate the availability reliable SRAM EDC state in the new bit
in the device properties.
Proposed userspace changes:
7cdd63475c
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The macro is for memory mapped by GPU as uncached.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The added format is V4L2_PIX_FMT_YUV24, this is a packed
YUV 4:4:4 format, with 8 bits for each component, 24 bits
per sample.
This format is used by the i.MX 8QuadMax and i.MX 8DualXPlus/8QuadXPlus
JPEG encoder/decoder.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix these kernel-doc warnings:
include/media/davinci/vpbe_osd.h:77: warning: Enum value 'PIXFMT_YCBCRI' not described in enum 'osd_pix_format'
include/media/davinci/vpbe_osd.h:77: warning: Enum value 'PIXFMT_YCRCBI' not described in enum 'osd_pix_format'
include/media/davinci/vpbe_osd.h:77: warning: Excess enum value 'PIXFMT_YCrCbI' description in 'osd_pix_format'
include/media/davinci/vpbe_osd.h:77: warning: Excess enum value 'PIXFMT_YCbCrI' description in 'osd_pix_format'
include/media/davinci/vpbe_osd.h:232: warning: expecting prototype for enum davinci_cursor_v_width. Prototype was for enum
osd_cursor_v_width instead
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'ns' not described in 'uvc_meta_buf'
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'sof' not described in 'uvc_meta_buf'
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'length' not described in 'uvc_meta_buf'
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'flags' not described in 'uvc_meta_buf'
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'buf' not described in 'uvc_meta_buf'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes the following kernel-doc warnings:
include/uapi/linux/videodev2.h:996: warning: Function parameter or member 'm' not described in 'v4l2_plane'
include/uapi/linux/videodev2.h:996: warning: Function parameter or member 'reserved' not described in 'v4l2_plane'
include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'm' not described in 'v4l2_buffer'
include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'reserved2' not described in 'v4l2_buffer'
include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'reserved' not described in 'v4l2_buffer'
include/uapi/linux/videodev2.h:1068: warning: Function parameter or member 'tv' not described in 'v4l2_timeval_to_ns'
include/uapi/linux/videodev2.h:1068: warning: Excess function parameter 'ts' description in 'v4l2_timeval_to_ns'
include/uapi/linux/videodev2.h:1138: warning: Function parameter or member 'reserved' not described in 'v4l2_exportbuffer'
include/uapi/linux/videodev2.h:2237: warning: Function parameter or member 'reserved' not described in 'v4l2_plane_pix_format'
include/uapi/linux/videodev2.h:2270: warning: Function parameter or member 'hsv_enc' not described in 'v4l2_pix_format_mplane'
include/uapi/linux/videodev2.h:2270: warning: Function parameter or member 'reserved' not described in 'v4l2_pix_format_mplane'
include/uapi/linux/videodev2.h:2281: warning: Function parameter or member 'reserved' not described in 'v4l2_sdr_format'
include/uapi/linux/videodev2.h:2315: warning: Function parameter or member 'fmt' not described in 'v4l2_format'
include/uapi/linux/v4l2-subdev.h:53: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_format'
include/uapi/linux/v4l2-subdev.h:66: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_crop'
include/uapi/linux/v4l2-subdev.h:89: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_mbus_code_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'min_width' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'max_width' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'min_height' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'max_height' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:119: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_interval'
include/uapi/linux/v4l2-subdev.h:140: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_interval_enum'
include/uapi/linux/cec.h:406: warning: Function parameter or member 'raw' not described in 'cec_connector_info'
include/uapi/linux/cec.h:470: warning: Function parameter or member 'flags' not described in 'cec_event'
include/media/v4l2-h264.h:82: warning: Function parameter or member 'reflist' not described in 'v4l2_h264_build_p_ref_list'
include/media/v4l2-h264.h:82: warning: expecting prototype for v4l2_h264_build_b_ref_lists(). Prototype was for v4l2_h264_build_p_ref_list()
instead
include/media/cec.h:50: warning: Function parameter or member 'lock' not described in 'cec_devnode'
include/media/v4l2-jpeg.h:122: warning: Function parameter or member 'num_dht' not described in 'v4l2_jpeg_header'
include/media/v4l2-jpeg.h:122: warning: Function parameter or member 'num_dqt' not described in 'v4l2_jpeg_header'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix following warnings:
./scripts/kernel-doc --none include/uapi/linux/v4l2-controls.h
include/uapi/linux/v4l2-controls.h:1727: warning: bad line:
include/uapi/linux/v4l2-controls.h:1853: warning: expecting prototype for struct v4l2_vp8_frame. Prototype was for struct v4l2_ctrl_vp8_frame instead
include/uapi/linux/v4l2-controls.h:1853: warning: Function parameter or member 'segment' not described in 'v4l2_ctrl_vp8_frame'
include/uapi/linux/v4l2-controls.h:1853: warning: Function parameter or member 'entropy' not described in 'v4l2_ctrl_vp8_frame'
include/uapi/linux/v4l2-controls.h:1853: warning: Function parameter or member 'coder_state' not described in 'v4l2_ctrl_vp8_frame'
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Until now, the VP8 V4L2 API was not exported as a public API,
and only defined in a private media header (media/vp8-ctrls.h).
The reason for this was a concern about the API not complete
and ready to support VP8 decoding hardware accelerators.
After reviewing the VP8 specification in detail, and now
that the API is able to support Cedrus and Hantro G1,
we can consider this ready.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move the VP8 stateless control types out of staging,
and re-number it to avoid any confusion.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since we are ready to stabilize the VP8 stateless API,
move the parsed VP8 pixel format.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a control to enable inserting of AUD NALU into encoded
bitstream.
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Make display delay and display delay enable MFC controls standard v4l
controls. This will allow reuse of the controls for other decoder
drivers. Also the new proposed controls are now codec agnostic because
they could be used for any codec.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmBXwRseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGX80H/2qQ49e2lbOfIqdR
CBThtgg89QmN9WPTfVhwB6b4vejB7kIiIpOPyJVkaio6lVe8Ewhl064fnGHwXm39
vPy0ZVAB96oaKaki6qi1k7jhCAMpl/vXf1RDe5PaEKPwp3Lr81BlY6dcTPbjxkFP
Uw+uC3iRQnT8msSqA1vnhbDl9w6jfmuxX45Eo9NWGz0hDCpZNOEt2oSo/OcXTH4k
c91FiW8Qv9uZX2tV4VSqFQgVPfneA+OWXMpjMg6kfK3jOJ5cZwmFGAa8ByqWACH/
U9OODYQCsyX5ZM11g7MOt7Iv+YSU8OA0We8KDN4cRZobrCHF0Txp3ZTSPjb/xHE3
9nUM50I=
=a6Go
-----END PGP SIGNATURE-----
Merge 5.12-rc4 into usb-next
We need the usb/thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Report the number of warnings that a user will get for exceeding the
soft limit of a realtime volume. This plugs a gap needed before we
can land a realtime quota implementation for XFS in the next cycle.
Link: https://lore.kernel.org/r/20210318041736.GB22094@magnolia
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
libdrm has supported the newer execbuffer2 ioctl and using it by default
when it exists since libdrm commit b50964027bef which landed Mar 2, 2010.
The i915 and i965 drivers in Mesa at the time both used libdrm and so
did the Intel X11 back-end. The SNA back-end for X11 has always used
execbuffer2.
v2 (Jason Ekstrand):
- Add a comment saying what Linux version it's being removed in.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Keith Packard <keithp@keithp.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317234014.2271006-2-jason@jlekstrand.net
Write protect bit, when set, inhibits supervisor writes to the read-only
pages. In guest supervisor shared virtual addressing (SVA), write-protect
should be honored upon guest bind supervisor PASID request.
This patch extends the VT-d portion of the IOMMU UAPI to include WP bit.
WPE bit of the supervisor PASID entry will be set to match CPU CR0.WP bit.
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-3-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
According with USB Device Class Definition for Video Device the
Processing Unit Descriptor bLength should be 12 (10 + bmControlSize),
but it has 11.
Invalid length caused that Processing Unit Descriptor Test Video form
CV tool failed. To fix this issue patch adds bmVideoStandards into
uvc_processing_unit_descriptor structure.
The bmVideoStandards field was added in UVC 1.1 and it wasn't part of
UVC 1.0a.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20210315071748.29706-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a description of the IOCTLs and provide information on the default
value of the source and destination addresses.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210311140413.31725-4-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
As the RPMSG_ADDR_ANY is a valid src or dst address that can be set by
user applications, migrate its definition in user API.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210311140413.31725-3-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Microsoft Surface Book series devices consist of a so-called
clipboard part (containing the CPU, touchscreen, and primary battery)
and a base part (containing keyboard, secondary battery, and optional
discrete GPU). These parts can be separated, i.e. the clipboard can be
detached and used as tablet.
This detachment process is initiated by pressing a button. On the
Surface Book 2 and 3 (targeted with this commit), the Surface Aggregator
Module (i.e. the embedded controller on those devices) attempts to send
a notification to any listening client driver and waits for further
instructions (i.e. whether the detachment process should continue or be
aborted). If it does not receive a response in a certain time-frame, the
detachment process (by default) continues and the clipboard can be
physically separated. In other words, (by default and) without a driver,
the detachment process takes about 10 seconds to complete.
This commit introduces a driver for this detachment system (called DTX).
This driver allows a user-space daemon to control and influence the
detachment behavior. Specifically, it forwards any detachment requests
to user-space, allows user-space to make such requests itself, and
allows handling of those requests. Requests can be handled by either
aborting, continuing/allowing, or delaying (i.e. resetting the timeout
via a heartbeat commend). The user-space API is implemented via the
/dev/surface/dtx miscdevice.
In addition, user-space can change the default behavior on timeout from
allowing detachment to disallowing it, which is useful if the (optional)
discrete GPU is in use.
Furthermore, this driver allows user-space to receive notifications
about the state of the base, specifically when it is physically removed
(as opposed to detachment requested), in what manner it is connected
(i.e. in reverse-/tent-/studio- or laptop-mode), and what type of base
is connected. Based on this information, the driver also provides a
simple tablet-mode switch (aliasing all modes without keyboard access,
i.e. tablet-mode and studio-mode to its reported tablet-mode).
An implementation of such a user-space daemon, allowing configuration of
detachment behavior via scripts (e.g. safely unmounting USB devices
connected to the base before continuing) can be found at [1].
[1]: https://github.com/linux-surface/surface-dtx-daemon
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210308184819.437438-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For userspace checkpoint and restore (C/R) a way of getting process state
containing RSEQ configuration is needed.
There are two ways this information is going to be used:
- to re-enable RSEQ for threads which had it enabled before C/R
- to detect if a thread was in a critical section during C/R
Since C/R preserves TLS memory and addresses RSEQ ABI will be restored
using the address registered before C/R.
Detection whether the thread is in a critical section during C/R is needed
to enforce behavior of RSEQ abort during C/R. Attaching with ptrace()
before registers are dumped itself doesn't cause RSEQ abort.
Restoring the instruction pointer within the critical section is
problematic because rseq_cs may get cleared before the control is passed
to the migrated application code leading to RSEQ invariants not being
preserved. C/R code will use RSEQ ABI address to find the abort handler
to which the instruction pointer needs to be set.
To achieve above goals expose the RSEQ ABI address and the signature value
with the new ptrace request PTRACE_GET_RSEQ_CONFIGURATION.
This new ptrace request can also be used by debuggers so they are aware
of stops within restartable sequences in progress.
Signed-off-by: Piotr Figiel <figiel@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michal Miroslaw <emmir@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20210226135156.1081606-1-figiel@google.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYFC+9QAKCRDh3BK/laaZ
PNUIAQD+g4qznv8fTiN5Juj+qr42DsLAWutI0EdVvZI4UMe01AEAmlLrlHZCE1dM
inXPu/Nq+0gMytAlodcOkHFtdOZqpgY=
=9izk
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Fix a deadlock and a couple of other bugs"
* tag 'fuse-fixes-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: 32-bit user space ioctl compat for fuse device
virtiofs: Fail dax mount if device does not support it
fuse: fix live lock in fuse_iget()
With a 64-bit kernel build the FUSE device cannot handle ioctl requests
coming from 32-bit user space. This is due to the ioctl command
translation that generates different command identifiers that thus cannot
be used for direct comparisons without proper manipulation.
Explicitly extract type and number from the ioctl command to enable 32-bit
user space compatibility on 64-bit kernel builds.
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add a connector type for USB connected display panels.
Some examples of what current userspace will name the connector:
- Weston: "UNNAMED-%d"
- Mutter: "Unknown20-%d"
- X: "Unknown20-%d"
v2:
- Update drm_connector_enum_list
- Add examples to commit message
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210313112545.37527-2-noralf@tronnes.org
Noralf needs some patches in 5.12-rc3, and we've been delaying the 5.12
merge due to the swap issue so it looks like a good time.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Resolves a merge issue with:
drivers/tty/hvc/hvcs.c
and we want the tty/serial fixes from 5.12-rc3 in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend psample to report the following attributes when available:
* Output traffic class as a 16-bit value
* Output traffic class occupancy in bytes as a 64-bit value
* End-to-end latency of the packet in nanoseconds resolution
* Software timestamp in nanoseconds resolution (always available)
* Packet's protocol. Needed for packet dissection in user space (always
available)
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow a policer action to enforce a rate-limit based on packets-per-second,
configurable using a packet-per-second rate and burst parameters.
e.g.
tc filter add dev tap1 parent ffff: u32 match \
u32 0 0 police pkts_rate 3000 pkts_burst 1000
Testing was unable to uncover a performance impact of this change on
existing features.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The umem DMA list calculation was locked at 4k pages due to confusion
around how this API works and is used when larger pages are present.
The conclusion is:
- umem's cannot extend past what is mapped into the process, so creating
a lage page size and referring to a sub-range is not allowed
- umem's must always have a page offset of zero, except for sub PAGE_SIZE
umems
- The feature of umem_offset to create multiple objects inside a umem
is buggy and isn't used anyplace. Thus we can assume all users of the
current API have umem_offset == 0 as well
Provide a new page size calculator that limits the DMA list to the VA
range and enforces umem_offset == 0.
Allow user space to specify the page sizes which it can accept, this
bitmap must be derived from the intended use of the umem, based on
per-usage HW limitations.
Link: https://lore.kernel.org/r/20210304130501.1102577-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- RTM_NEWNEXTHOP et.al. that handle resilient groups will have a new nested
attribute, NHA_RES_GROUP, whose elements are attributes NHA_RES_GROUP_*.
- RTM_NEWNEXTHOPBUCKET et.al. is a suite of new messages that will
currently serve only for dumping of individual buckets of resilient next
hop groups. For nexthop group buckets, these messages will carry a nested
attribute NHA_RES_BUCKET, whose elements are attributes NHA_RES_BUCKET_*.
There are several reasons why a new suite of messages is created for
nexthop buckets instead of overloading the information on the existing
RTM_{NEW,DEL,GET}NEXTHOP messages.
First, a nexthop group can contain a large number of nexthop buckets (4k
is not unheard of). This imposes limits on the amount of information that
can be encoded for each nexthop bucket given a netlink message is limited
to 64k bytes.
Second, while RTM_NEWNEXTHOPBUCKET is only used for notifications at
this point, in the future it can be extended to provide user space with
control over nexthop buckets configuration.
- The new group type is NEXTHOP_GRP_TYPE_RES. Note that nexthop code is
adjusted to bounce groups with that type for now.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The HIP09 supports XRC transport service, it greatly saves the number of
QPs required to connect all processes in a large cluster.
Link: https://lore.kernel.org/r/1614826558-35423-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With this change, an ioctl() call is added to open a character device for a
buffer. The ioctl() number is 'i' 0x91, which follows the
IIO_GET_EVENT_FD_IOCTL ioctl.
The ioctl() will return an FD for the requested buffer index. The indexes
are the same from the /sys/iio/devices/iio:deviceX/bufferY (i.e. the Y
variable).
Since there doesn't seem to be a sane way to return the FD for buffer0 to
be the same FD for the /dev/iio:deviceX, this ioctl() will return another
FD for buffer0 (or the first buffer). This duplicate FD will be able to
access the same buffer object (for buffer0) as accessing directly the
/dev/iio:deviceX chardev.
Also, there is no IIO_BUFFER_GET_BUFFER_COUNT ioctl() implemented, as the
index for each buffer (and the count) can be deduced from the
'/sys/bus/iio/devices/iio:deviceX/bufferY' folders (i.e the number of
bufferY folders).
Used following C code to test this:
-------------------------------------------------------------------
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <fcntl.h"
#include <errno.h>
#define IIO_BUFFER_GET_FD_IOCTL _IOWR('i', 0x91, int)
int main(int argc, char *argv[])
{
int fd;
int fd1;
int ret;
if ((fd = open("/dev/iio:device0", O_RDWR))<0) {
fprintf(stderr, "Error open() %d errno %d\n",fd, errno);
return -1;
}
fprintf(stderr, "Using FD %d\n", fd);
fd1 = atoi(argv[1]);
ret = ioctl(fd, IIO_BUFFER_GET_FD_IOCTL, &fd1);
if (ret < 0) {
fprintf(stderr, "Error for buffer %d ioctl() %d errno %d\n", fd1, ret, errno);
close(fd);
return -1;
}
fprintf(stderr, "Got FD %d\n", fd1);
close(fd1);
close(fd);
return 0;
}
-------------------------------------------------------------------
Results are:
-------------------------------------------------------------------
# ./test 0
Using FD 3
Got FD 4
# ./test 1
Using FD 3
Got FD 4
# ./test 2
Using FD 3
Got FD 4
# ./test 3
Using FD 3
Got FD 4
# ls /sys/bus/iio/devices/iio\:device0
buffer buffer0 buffer1 buffer2 buffer3 dev
in_voltage_sampling_frequency in_voltage_scale
in_voltage_scale_available
name of_node power scan_elements subsystem uevent
-------------------------------------------------------------------
iio:device0 has some fake kfifo buffers attached to an IIO device.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210215104043.91251-21-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
struct v4l2_ctrl_h264_pps members obviously match picture parameter syntax,
not sequence parameter syntax.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-03-10
The following pull-request contains BPF updates for your *net* tree.
We've added 8 non-merge commits during the last 5 day(s) which contain
a total of 11 files changed, 136 insertions(+), 17 deletions(-).
The main changes are:
1) Reject bogus use of vmlinux BTF as map/prog creation BTF, from Alexei Starovoitov.
2) Fix allocation failure splat in x86 JIT for large progs. Also fix overwriting
percpu cgroup storage from tracing programs when nested, from Yonghong Song.
3) Fix rx queue retrieval in XDP for multi-queue veth, from Maciej Fijalkowski.
4) Fix bpf_check_mtu() helper API before freeze to have mtu_len as custom skb/xdp
L3 input length, from Jesper Dangaard Brouer.
5) Fix inode_storage's lookup_elem return value upon having bad fd, from Tal Lossos.
6) Fix bpftool and libbpf cross-build on MacOS, from Georgi Valkov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Following the recent update to MAINTAINERS update my e-mail address.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Cyclades driver was orphaned by commit d459883e6c (MAINTAINERS:
remove two dead e-mail) 13 years ago. Noone stepped up to take care of
them and to fix all the issues the driver has.
On the top of that, there is no way to obtain the firmware for Z cards
from the vendor as cyclades.com ceased to exist.
So it's time to drop the driver with all its traces.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210302062214.29627-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-03-09
The following pull-request contains BPF updates for your *net-next* tree.
We've added 90 non-merge commits during the last 17 day(s) which contain
a total of 114 files changed, 5158 insertions(+), 1288 deletions(-).
The main changes are:
1) Faster bpf_redirect_map(), from Björn.
2) skmsg cleanup, from Cong.
3) Support for floating point types in BTF, from Ilya.
4) Documentation for sys_bpf commands, from Joe.
5) Support for sk_lookup in bpf_prog_test_run, form Lorenz.
6) Enable task local storage for tracing programs, from Song.
7) bpf_for_each_map_elem() helper, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.
2) TX skb error handling fix in mt76 driver, also from Felix.
3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.
4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
From Cong Wang.
5) Use correct printf format for dma_addr_t in ath11k, from Geert
Uytterhoeven.
6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
Hsieh.
7) Don't report truncated frames to mac80211 in mt76 driver, from
Lorenzop Bianconi.
8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.
9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.
10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
Arjun Roy.
11) Ignore routes with deleted nexthop object in mlxsw, from Ido
Schimmel.
12) Need to undo tcp early demux lookup sometimes in nf_nat, from
Florian Westphal.
13) Fix gro aggregation for udp encaps with zero csum, from Daniel
Borkmann.
14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
Donenfeld.
15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.
16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.
17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
Oltean.
18) Make sure textsearch copntrol block is large enough, from Wilem de
Bruijn.
19) Revert MAC changes to r8152 leading to instability, from Hates Wang.
20) Advance iov in 9p even for empty reads, from Jissheng Zhang.
21) Double hook unregister in nftables, from PabloNeira Ayuso.
22) Fix memleak in ixgbe, fropm Dinghao Liu.
23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.
24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
Tang.
25) Fix DOI refcount bugs in cipso, from Paul Moore.
26) One too many irqsave in ibmvnic, from Junlin Yang.
27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
Balazs Nemeth.
* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
s390/qeth: fix notification for pending buffers during teardown
s390/qeth: schedule TX NAPI on QAOB completion
s390/qeth: improve completion of pending TX buffers
s390/qeth: fix memory leak after failed TX Buffer allocation
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
net: dsa: xrs700x: check if partner is same as port in hsr join
net: lapbether: Remove netif_start_queue / netif_stop_queue
atm: idt77252: fix null-ptr-dereference
atm: uPD98402: fix incorrect allocation
atm: fix a typo in the struct description
net: qrtr: fix error return code of qrtr_sendmsg()
mptcp: fix length of ADD_ADDR with port sub-option
net: bonding: fix error return code of bond_neigh_init()
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
net: enetc: set MAC RX FIFO to recommended value
net: davicom: Use platform_get_irq_optional()
net: davicom: Fix regulator not turned off on driver removal
net: davicom: Fix regulator not turned off on failed probe
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
...
Document all of the DRM_CAP_* defines.
v2 (Pekka):
- Describe what the bit depth is
- Expand on preferred dumb buffer memory access patterns
- Explain what a PRIME buffer is
- Mention DRM_IOCTL_PRIME_FD_TO_HANDLE and DRM_IOCTL_PRIME_HANDLE_TO_FD
- Explicitly reference CLOCK_REALTIME and CLOCK_MONOTONIC
- Make it clear DRM_CAP_CRTC_IN_VBLANK_EVENT applies to both DRM_EVENT_VBLANK
and DRM_EVENT_FLIP_COMPLETE
v3 (Daniel):
- Specify kernel versions for caps that don't depend on drivers
- Make it clear dumb buffers caps are only about dumb buffers
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210308123421.747836-1-contact@emersion.fr
The FIB lookup example[1] show how the IP-header field tot_len
(iph->tot_len) is used as input to perform the MTU check.
This patch extend the BPF-helper bpf_check_mtu() with the same ability
to provide the length as user parameter input, via mtu_len parameter.
This still needs to be done before the bpf_check_mtu() helper API
becomes frozen.
[1] samples/bpf/xdp_fwd_kern.c
Fixes: 34b2021cc6 ("bpf: Add BPF-helper for MTU checking")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161521555850.3515614.6533850861569774444.stgit@firesoul
Introduce skeleton of the virtio sound driver. The driver implements
the virtio sound device specification, which has become part of the
virtio standard.
Initial initialization of the device, virtqueues and creation of an
empty ALSA sound device.
Signed-off-by: Anton Yakovlev <anton.yakovlev@opensynergy.com>
Link: https://lore.kernel.org/r/20210302164709.3142702-3-anton.yakovlev@opensynergy.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect enum type definition in nfnetlink_cthelper UAPI,
from Dmitry V. Levin.
2) Remove extra space in deprecated automatic helper assignment
notice, from Klemen Košir.
3) Drop early socket demux socket after NAT mangling, from
Florian Westphal. Add a test to exercise this bug.
4) Fix bogus invalid packet report in the conntrack TCP tracker,
also from Florian.
5) Fix access to xt[NFPROTO_UNSPEC] list with no mutex
in target/match_revfn(), from Vasily Averin.
6) Disallow updates on the table ownership flag.
7) Fix double hook unregistration of tables with owner.
8) Remove bogus check on the table owner in __nft_release_tables().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf_skb_adjust_room sets the inner_protocol as skb->protocol for packets
encapsulation. But that is not appropriate when pushing Ethernet header.
Add an option to further specify encap L2 type and set the inner_protocol
as ETH_P_TEB.
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Xuesen Huang <huangxuesen@kuaishou.com>
Signed-off-by: Zhiyong Cheng <chengzhiyong@kuaishou.com>
Signed-off-by: Li Wang <wangli09@kuaishou.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/20210304064046.6232-1-hxseverything@gmail.com
Allow to pass sk_lookup programs to PROG_TEST_RUN. User space
provides the full bpf_sk_lookup struct as context. Since the
context includes a socket pointer that can't be exposed
to user space we define that PROG_TEST_RUN returns the cookie
of the selected socket or zero in place of the socket pointer.
We don't support testing programs that select a reuseport socket,
since this would mean running another (unrelated) BPF program
from the sk_lookup test handler.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210303101816.36774-3-lmb@cloudflare.com
Abstract out the target parameter so that upcoming commits, more than
just the existing "helpers" target can be called to generate specific
portions of docs from the eBPF UAPI headers.
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-10-joe@cilium.io
Based roughly on the following commits:
* Commit cb4d03ab49 ("bpf: Add generic support for lookup batch op")
* Commit 057996380a ("bpf: Add batch ops to all htab bpf map")
* Commit aa2e93b8e5 ("bpf: Add generic support for update and delete
batch ops")
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Brian Vazquez <brianvv@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-9-joe@cilium.io
Commit 468e2f64d2 ("bpf: introduce BPF_PROG_QUERY command") originally
introduced this, but there have been several additions since then.
Unlike BPF_PROG_ATTACH, it appears that the sockmap progs are not able
to be queried so far.
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-8-joe@cilium.io
Based on a brief read of the corresponding source code.
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-7-joe@cilium.io
Commit b2197755b2 ("bpf: add support for persistent maps/progs")
contains the original implementation and git logs, used as reference for
this documentation.
Also pull in the filename restriction as documented in commit 6d8cb045cd
("bpf: comment why dots in filenames under BPF virtual FS are not allowed")
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-5-joe@cilium.io
Document the meaning of the BPF_F_LOCK flag for the map lookup/update
descriptions. Based on commit 96049f3afd ("bpf: introduce BPF_F_LOCK
flag").
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-4-joe@cilium.io
Introduce high-level descriptions of the intent and return codes of the
bpf() syscall commands. Subsequent patches may further flesh out the
content to provide a more useful programming reference.
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-3-joe@cilium.io
These descriptions are present in the man-pages project from the
original submissions around 2015-2016. Import them so that they can be
kept up to date as developers extend the bpf syscall commands.
These descriptions follow the pattern used by scripts/bpf_helpers_doc.py
so that we can take advantage of the parser to generate more up-to-date
man page writing based upon these headers.
Some minor wording adjustments were made to make the descriptions
more consistent for the description / return format.
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-2-joe@cilium.io
Co-authored-by: Alexei Starovoitov <ast@kernel.org>
Co-authored-by: Michael Kerrisk <mtk.manpages@gmail.com>
* selftests fixes
* Add runstate information to the new Xen support
* Allow compiling out the Xen interface
* 32-bit PAE without EPT bugfix
* NULL pointer dereference bugfix
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmA+lGcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMaMQf/Q8bQr5vVAeNk+1MyRmzNqFEbLqbe
h50f4Wd2N+svZ6XinQH1vvuQm1WYj/g616Q3nCeYwCJyY34g5tf60XcuAMnVRIzw
qc2IUvSAJ3faVElMrSA5thN3bkPzJpRrdIpQGBgOd+rT+eQkPSsJlTy34JJmvbmh
xFGjoVj49tYEkFfpxEbtytW6QiYtPz/ai8SARRXbEUWO/pVzdkgK5XWshRhE9vpB
GLCEXUngdPokJMblRMuK4YOSFQXXHobAJAgPwSzguDV41qezXaKOGYOLe7+V+0kH
z607RnQc1wGgsLanT13okYMQr09/XCjpvFkZ9CK2bIJPsyWP+ihA/37hVQ==
=1GNo
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- Doc fixes
- selftests fixes
- Add runstate information to the new Xen support
- Allow compiling out the Xen interface
- 32-bit PAE without EPT bugfix
- NULL pointer dereference bugfix
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Clear the CR4 register on reset
KVM: x86/xen: Add support for vCPU runstate information
KVM: x86/xen: Fix return code when clearing vcpu_info and vcpu_time_info
selftests: kvm: Mmap the entire vcpu mmap area
KVM: Documentation: Fix index for KVM_CAP_PPC_DAWR1
KVM: x86: allow compiling out the Xen hypercall interface
KVM: xen: flush deferred static key before checking it
KVM: x86/mmu: Set SPTE_AD_WRPROT_ONLY_MASK if and only if PML is enabled
KVM: x86: hyper-v: Fix Hyper-V context null-ptr-deref
KVM: x86: remove misplaced comment on active_mmu_pages
KVM: Documentation: rectify rst markup in kvm_run->flags
Documentation: kvm: fix messy conversion from .txt to .rst
Commit 5ee759cda5 ("l2tp: use standard API for warning log messages")
changed a number of warnings about invalid packets in the receive path
so that they are always shown, instead of only when a special L2TP debug
flag is set. Even with rate limiting these warnings can easily cause
significant log spam - potentially triggered by a malicious party
sending invalid packets on purpose.
In addition these warnings were noticed by projects like Tunneldigger [1],
which uses L2TP for its data path, but implements its own control
protocol (which is sufficiently different from L2TP data packets that it
would always be passed up to userspace even with future extensions of
L2TP).
Some of the warnings were already redundant, as l2tp_stats has a counter
for these packets. This commit adds one additional counter for invalid
packets that are passed up to userspace. Packets with unknown session are
not counted as invalid, as there is nothing wrong with the format of
these packets.
With the additional counter, all of these messages are either redundant
or benign, so we reduce them to pr_debug_ratelimited().
[1] https://github.com/wlanslovenija/tunneldigger/issues/160
Fixes: 5ee759cda5 ("l2tp: use standard API for warning log messages")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is how Xen guests do steal time accounting. The hypervisor records
the amount of time spent in each of running/runnable/blocked/offline
states.
In the Xen accounting, a vCPU is still in state RUNSTATE_running while
in Xen for a hypercall or I/O trap, etc. Only if Xen explicitly schedules
does the state become RUNSTATE_blocked. In KVM this means that even when
the vCPU exits the kvm_run loop, the state remains RUNSTATE_running.
The VMM can explicitly set the vCPU to RUNSTATE_blocked by using the
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT attribute, and can also use
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST to retrospectively add a given
amount of time to the blocked state and subtract it from the running
state.
The state_entry_time corresponds to get_kvmclock_ns() at the time the
vCPU entered the current state, and the total times of all four states
should always add up to state_entry_time.
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apparently, <linux/netfilter/nfnetlink_cthelper.h> and
<linux/netfilter/nfnetlink_acct.h> could not be included into the same
compilation unit because of a cut-and-paste typo in the former header.
Fixes: 12f7a50533 ("netfilter: add user-space connection tracking helper infrastructure")
Cc: <stable@vger.kernel.org> # v3.6
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmA4JRkQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpoWqD/9dbbqe8L701U6May1A/4hRsqL4THTA2flx
vNCNRBl6XV3l/wBCtL6waKy6tyO4lyM8XdUdEvo3Kxl2kGPb8eVfpyYL/+77HqyH
ctT4RMrs+84Mxn+5N6cM97hS1qVI2moTxxyvOEl/JTB7BYrutz9gvAoeY3/Dto47
J66oSaPeuqJ32TyihxfQHVxQopJcqFzDjyoYHGDu6ATio1PXfaIdTu8ywVYSECAh
pWI4rwnqdurGuHMNpxyL1bA6CT/jC7s+sqU7bUYUCgtYI3eG0u3V0bp5gAQQIgl9
5sxxE3DidYGAkYZsosrelshBtzGddLdz4Qrt2ungMYv8RsGNpFQ095jDPKDwFaZj
bSvSsfplCo7iFsJByb1TtpNEOW8eAwi81PmBDVQ9Oq5P5ygTYno9GBDc/20ql0Fk
q6wcX28coE3IBw44ne0hIwvBOtXV4WJyluG/gqOxfbTH+kOy3pDsN8lWcY/P4X0U
yzdU2MLHe8BNMyYlUiBF47Amzt4ltr85P4XD3WZ4bX71iwri6HvrdGWLuuKwX+Ie
66QiIDDQIYZQ6NMMJWS9DGW3y3DBizpSXGxONbOw1J2bQdNmtToR0D2UnK/9UnKp
msnvkUNk8fkYGS4aptpJ6HxbmjMEG5YtbiGlPj6fz5/7MTvhRjPxt7A0LWrUIdqR
f88+sHUMqg==
=oc8u
-----END PGP SIGNATURE-----
Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block
Pull io_uring thread rewrite from Jens Axboe:
"This converts the io-wq workers to be forked off the tasks in question
instead of being kernel threads that assume various bits of the
original task identity.
This kills > 400 lines of code from io_uring/io-wq, and it's the worst
part of the code. We've had several bugs in this area, and the worry
is always that we could be missing some pieces for file types doing
unusual things (recent /dev/tty example comes to mind, userfaultfd
reads installing file descriptors is another fun one... - both of
which need special handling, and I bet it's not the last weird oddity
we'll find).
With these identical workers, we can have full confidence that we're
never missing anything. That, in itself, is a huge win. Outside of
that, it's also more efficient since we're not wasting space and code
on tracking state, or switching between different states.
I'm sure we're going to find little things to patch up after this
series, but testing has been pretty thorough, from the usual
regression suite to production. Any issue that may crop up should be
manageable.
There's also a nice series of further reductions we can do on top of
this, but I wanted to get the meat of it out sooner rather than later.
The general worry here isn't that it's fundamentally broken. Most of
the little issues we've found over the last week have been related to
just changes in how thread startup/exit is done, since that's the main
difference between using kthreads and these kinds of threads. In fact,
if all goes according to plan, I want to get this into the 5.10 and
5.11 stable branches as well.
That said, the changes outside of io_uring/io-wq are:
- arch setup, simple one-liner to each arch copy_thread()
implementation.
- Removal of net and proc restrictions for io_uring, they are no
longer needed or useful"
* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
io-wq: remove now unused IO_WQ_BIT_ERROR
io_uring: fix SQPOLL thread handling over exec
io-wq: improve manager/worker handling over exec
io_uring: ensure SQPOLL startup is triggered before error shutdown
io-wq: make buffered file write hashed work map per-ctx
io-wq: fix race around io_worker grabbing
io-wq: fix races around manager/worker creation and task exit
io_uring: ensure io-wq context is always destroyed for tasks
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
io_uring: cleanup ->user usage
io-wq: remove nr_process accounting
io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
net: remove cmsg restriction from io_uring based send/recvmsg calls
Revert "proc: don't allow async path resolution of /proc/self components"
Revert "proc: don't allow async path resolution of /proc/thread-self components"
io_uring: move SQPOLL thread io-wq forked worker
io-wq: make io_wq_fork_thread() available to other users
io-wq: only remove worker from free_list, if it was there
io_uring: remove io_identity
io_uring: remove any grabbing of context
...
We currently hardcode these in mesa, but querying them from
the kernel makes more sense since there may be board specific
limitations that the kernel driver is better suited to
determining.
Userpace patches that use this interface:
https://gitlab.freedesktop.org/leoliu/drm/-/commits/info_video_capshttps://gitlab.freedesktop.org/leoliu/mesa/-/commits/info_video_caps
v2: reorder the codecs to better align with mesa
v3: add max_pixels_per_frame to handle the portrait case, squash in
memory leak fix
v4: drop extra break
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bpf_for_each_map_elem() helper is introduced which
iterates all map elements with a callback function. The
helper signature looks like
long bpf_for_each_map_elem(map, callback_fn, callback_ctx, flags)
and for each map element, the callback_fn will be called. For example,
like hashmap, the callback signature may look like
long callback_fn(map, key, val, callback_ctx)
There are two known use cases for this. One is from upstream ([1]) where
a for_each_map_elem helper may help implement a timeout mechanism
in a more generic way. Another is from our internal discussion
for a firewall use case where a map contains all the rules. The packet
data can be compared to all these rules to decide allow or deny
the packet.
For array maps, users can already use a bounded loop to traverse
elements. Using this helper can avoid using bounded loop. For other
type of maps (e.g., hash maps) where bounded loop is hard or
impossible to use, this helper provides a convenient way to
operate on all elements.
For callback_fn, besides map and map element, a callback_ctx,
allocated on caller stack, is also passed to the callback
function. This callback_ctx argument can provide additional
input and allow to write to caller stack for output.
If the callback_fn returns 0, the helper will iterate through next
element if available. If the callback_fn returns 1, the helper
will stop iterating and returns to the bpf program. Other return
values are not used for now.
Currently, this helper is only available with jit. It is possible
to make it work with interpreter with so effort but I leave it
as the future work.
[1]: https://lore.kernel.org/bpf/20210122205415.113822-1-xiyou.wangcong@gmail.com/
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210226204925.3884923-1-yhs@fb.com
Alexei Starovoitov says:
====================
pull-request: bpf 2021-02-26
1) Fix for bpf atomic insns with src_reg=r0, from Brendan.
2) Fix use after free due to bpf_prog_clone, from Cong.
3) Drop imprecise verifier log message, from Dmitrii.
4) Remove incorrect blank line in bpf helper description, from Hangbin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: No need to drop the packet when there is no geneve opt
bpf: Remove blank line in bpf helper description comment
tools/resolve_btfids: Fix build error with older host toolchains
selftests/bpf: Fix a compiler warning in global func test
bpf: Drop imprecise log message
bpf: Clear percpu pointers in bpf_prog_clone_free()
bpf: Fix a warning message in mark_ptr_not_null_reg()
bpf, x86: Fix BPF_FETCH atomic and/or/xor with r0 as src
====================
Link: https://lore.kernel.org/r/20210226193737.57004-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 34b2021cc6 ("bpf: Add BPF-helper for MTU checking") added an extra
blank line in bpf helper description. This will make bpf_helpers_doc.py stop
building bpf_helper_defs.h immediately after bpf_check_mtu(), which will
affect future added functions.
Fixes: 34b2021cc6 ("bpf: Add BPF-helper for MTU checking")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210223131457.1378978-1-liuhangbin@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Merge more updates from Andrew Morton:
"118 patches:
- The rest of MM.
Includes kfence - another runtime memory validator. Not as thorough
as KASAN, but it has unmeasurable overhead and is intended to be
usable in production builds.
- Everything else
Subsystems affected by this patch series: alpha, procfs, sysctl,
misc, core-kernel, MAINTAINERS, lib, bitops, checkpatch, init,
coredump, seq_file, gdb, ubsan, initramfs, and mm (thp, cma,
vmstat, memory-hotplug, mlock, rmap, zswap, zsmalloc, cleanups,
kfence, kasan2, and pagemap2)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
MIPS: make userspace mapping young by default
initramfs: panic with memory information
ubsan: remove overflow checks
kgdb: fix to kill breakpoints on initmem after boot
scripts/gdb: fix list_for_each
x86: fix seq_file iteration for pat/memtype.c
seq_file: document how per-entry resources are managed.
fs/coredump: use kmap_local_page()
init/Kconfig: fix a typo in CC_VERSION_TEXT help text
init: clean up early_param_on_off() macro
init/version.c: remove Version_<LINUX_VERSION_CODE> symbol
checkpatch: do not apply "initialise globals to 0" check to BPF progs
checkpatch: don't warn about colon termination in linker scripts
checkpatch: add kmalloc_array_node to unnecessary OOM message check
checkpatch: add warning for avoiding .L prefix symbols in assembly files
checkpatch: improve TYPECAST_INT_CONSTANT test message
checkpatch: prefer ftrace over function entry/exit printks
checkpatch: trivial style fixes
checkpatch: ignore warning designated initializers using NR_CPUS
checkpatch: improve blank line after declaration test
...
Drop the doubled word "for" in a comment. {firewire-cdev.h}
Drop the doubled word "in" in a comment. {input.h}
Drop the doubled word "a" in a comment. {mdev.h}
Drop the doubled word "the" in a comment. {ptrace.h}
Link: https://lkml.kernel.org/r/20210126232444.22861-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
new vdpa features to allow creation and deletion of new devices
virtio-blk support per-device queue depth
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmA3+oYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpyXgIAL71dM1GjVwnJC/hZHRPeRKBLUVzj7bAILaO
i4TKQj0rs5OjJPrbGJVrbTpiUXfef+D75lzKYmOnfk+f2UeYSR6XecnlWbLddI16
RcMHQW6lt/M5WiyQjt71VH+gqtKIJLHDt3Ek1C0g8BjbFEWnpElAqdd/AWkzg9B9
ibCVPQq9dk+A8ZtfZpFB7/ykykHY8ndNQS9RJQLtE8fLNifN3Cir+uUf+pFzjjbs
PvukiN7BNqHXOCeoMpMttEuYGNR29jgZHbEm1hdnSQ55NIYqLMuhoD8eO114/CBz
p4clSmzhVoSU0sfc3igcyCZoVtjRcebOAaep7OoaIBRlQ1MXht8=
=YFEf
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- new vdpa features to allow creation and deletion of new devices
- virtio-blk support per-device queue depth
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (31 commits)
virtio-input: add multi-touch support
virtio_mmio: fix one typo
vdpa/mlx5: fix param validation in mlx5_vdpa_get_config()
virtio_net: Fix fall-through warnings for Clang
virtio_input: Prevent EV_MSC/MSC_TIMESTAMP loop storm for MT.
virtio-blk: support per-device queue depth
virtio_vdpa: don't warn when fail to disable vq
virtio-pci: introduce modern device module
virito-pci-modern: rename map_capability() to vp_modern_map_capability()
virtio-pci-modern: introduce helper to get notification offset
virtio-pci-modern: introduce helper for getting queue nums
virtio-pci-modern: introduce helper for setting/geting queue size
virtio-pci-modern: introduce helper to set/get queue_enable
virtio-pci-modern: introduce vp_modern_queue_address()
virtio-pci-modern: introduce vp_modern_set_queue_vector()
virtio-pci-modern: introduce vp_modern_generation()
virtio-pci-modern: introduce helpers for setting and getting features
virtio-pci-modern: introduce helpers for setting and getting status
virtio-pci-modern: introduce helper to set config vector
virtio-pci-modern: introduce vp_modern_remove()
...
Merge misc updates from Andrew Morton:
"A few small subsystems and some of MM.
172 patches.
Subsystems affected by this patch series: hexagon, scripts, ntfs,
ocfs2, vfs, and mm (slab-generic, slab, slub, debug, pagecache, swap,
memcg, pagemap, mprotect, mremap, page-reporting, vmalloc, kasan,
pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
mempolicy, oom-kill, hugetlbfs, and migration)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (172 commits)
mm/migrate: remove unneeded semicolons
hugetlbfs: remove unneeded return value of hugetlb_vmtruncate()
hugetlbfs: fix some comment typos
hugetlbfs: correct some obsolete comments about inode i_mutex
hugetlbfs: make hugepage size conversion more readable
hugetlbfs: remove meaningless variable avoid_reserve
hugetlbfs: correct obsolete function name in hugetlbfs_read_iter()
hugetlbfs: use helper macro default_hstate in init_hugetlbfs_fs
hugetlbfs: remove useless BUG_ON(!inode) in hugetlbfs_setattr()
hugetlbfs: remove special hugetlbfs_set_page_dirty()
mm/hugetlb: change hugetlb_reserve_pages() to type bool
mm, oom: fix a comment in dump_task()
mm/mempolicy: use helper range_in_vma() in queue_pages_test_walk()
numa balancing: migrate on fault among multiple bound nodes
mm, compaction: make fast_isolate_freepages() stay within zone
mm/compaction: fix misbehaviors of fast_find_migrateblock()
mm/compaction: correct deferral logic for proactive compaction
mm/compaction: remove duplicated VM_BUG_ON_PAGE !PageLocked
mm/compaction: remove rcu_read_lock during page compaction
z3fold: simplify the zhdr initialization code in init_z3fold_page()
...
Now, NUMA balancing can only optimize the page placement among the NUMA
nodes if the default memory policy is used. Because the memory policy
specified explicitly should take precedence. But this seems too strict in
some situations. For example, on a system with 4 NUMA nodes, if the
memory of an application is bound to the node 0 and 1, NUMA balancing can
potentially migrate the pages between the node 0 and 1 to reduce
cross-node accessing without breaking the explicit memory binding policy.
So in this patch, we add MPOL_F_NUMA_BALANCING mode flag to
set_mempolicy() when mode is MPOL_BIND. With the flag specified, NUMA
balancing will be enabled within the thread to optimize the page placement
within the constrains of the specified memory binding policy. With the
newly added flag, the NUMA balancing control mechanism becomes,
- sysctl knob numa_balancing can enable/disable the NUMA balancing
globally.
- even if sysctl numa_balancing is enabled, the NUMA balancing will be
disabled for the memory areas or applications with the explicit
memory policy by default.
- MPOL_F_NUMA_BALANCING can be used to enable the NUMA balancing for
the applications when specifying the explicit memory policy
(MPOL_BIND).
Various page placement optimization based on the NUMA balancing can be
done with these flags. As the first step, in this patch, if the memory of
the application is bound to multiple nodes (MPOL_BIND), and in the hint
page fault handler the accessing node are in the policy nodemask, the page
will be tried to be migrated to the accessing node to reduce the
cross-node accessing.
If the newly added MPOL_F_NUMA_BALANCING flag is specified by an
application on an old kernel version without its support, set_mempolicy()
will return -1 and errno will be set to EINVAL. The application can use
this behavior to run on both old and new kernel versions.
And if the MPOL_F_NUMA_BALANCING flag is specified for the mode other than
MPOL_BIND, set_mempolicy() will return -1 and errno will be set to EINVAL
as before. Because we don't support optimization based on the NUMA
balancing for these modes.
In the previous version of the patch, we tried to reuse MPOL_MF_LAZY for
mbind(). But that flag is tied to MPOL_MF_MOVE.*, so it seems not a good
API/ABI for the purpose of the patch.
And because it's not clear whether it's necessary to enable NUMA balancing
for a specific memory area inside an application, so we only add the flag
at the thread level (set_mempolicy()) instead of the memory area level
(mbind()). We can do that when it become necessary.
To test the patch, we run a test case as follows on a 4-node machine with
192 GB memory (48 GB per node).
1. Change pmbench memory accessing benchmark to call set_mempolicy()
to bind its memory to node 1 and 3 and enable NUMA balancing. Some
related code snippets are as follows,
#include <numaif.h>
#include <numa.h>
struct bitmask *bmp;
int ret;
bmp = numa_parse_nodestring("1,3");
ret = set_mempolicy(MPOL_BIND | MPOL_F_NUMA_BALANCING,
bmp->maskp, bmp->size + 1);
/* If MPOL_F_NUMA_BALANCING isn't supported, fall back to MPOL_BIND */
if (ret < 0 && errno == EINVAL)
ret = set_mempolicy(MPOL_BIND, bmp->maskp, bmp->size + 1);
if (ret < 0) {
perror("Failed to call set_mempolicy");
exit(-1);
}
2. Run a memory eater on node 3 to use 40 GB memory before running pmbench.
3. Run pmbench with 64 processes, the working-set size of each process
is 640 MB, so the total working-set size is 64 * 640 MB = 40 GB. The
CPU and the memory (as in step 1.) of all pmbench processes is bound
to node 1 and 3. So, after CPU usage is balanced, some pmbench
processes run on the CPUs of the node 3 will access the memory of
the node 1.
4. After the pmbench processes run for 100 seconds, kill the memory
eater. Now it's possible for some pmbench processes to migrate
their pages from node 1 to node 3 to reduce cross-node accessing.
Test results show that, with the patch, the pages can be migrated from
node 1 to node 3 after killing the memory eater, and the pmbench score
can increase about 17.5%.
Link: https://lkml.kernel.org/r/20210120061235.148637-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
