These are the new priviledged interfaces to the VMM backends, and expose
some functionality that wasn't previously available.
It's now possible to allocate a chunk of address-space (even all of it),
without causing page tables to be allocated up-front, and then map into
it at arbitrary locations. This is the basic primitive used to support
features such as sparse mapping, or to allow userspace control over its
own address-space, or HMM (where the GPU driver isn't in control of the
address-space layout).
Rather than being tied to a subtle combination of memory object and VMA
properties, arguments that control map flags (ro, kind, etc) are passed
explicitly at map time.
The compatibility hacks to implement the old frontend on top of the new
driver backends have been replaced with something similar to implement
the old frontend's interfaces on top of the new frontend.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adds support for:
- 64KiB/2MiB big page sizes (128KiB not supported by HW with new PT layout).
- System-memory PTs.
- LPTE "invalid" state.
- (Tegra) Use of video memory aperture.
- Sparse PDEs/PTEs.
- Additional blocklinear kinds.
- 49-bit address-space.
GP100 supports an entirely new 5-level page table layout that provides
an expanded 49-bit address-space. It also supports the layout present
on previous generations, which we've been making do with until now.
This commit implements support for the new layout, and enables it by
default.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adds support for:
- 64KiB big page size.
- System-memory PTs.
- LPTE "invalid" state.
- (Tegra) Use of video memory aperture.
Adds support for marking LPTEs invalid, resulting in the corresponding
SPTEs being ignored, which is supposed to speed up TLB invalidates.
On The Tegra side, this will switch to using the video memory aperture
for all mappings. The HW will still target non-coherent system memory,
but this aperture needs to be selected in order to support compression.
Tegra's instmem backend somewhat cheated to get this effect previously.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is the common code to support a rework of the VMM backends.
It adds support for more than 2 levels of page table nesting, which
is required to be able to support GP100's MMU layout.
Sparse mappings (that don't cause MMU faults when accessed) are now
supported, where the backend provides it.
Dual-PT handling had to become more sophisticated to support sparse,
but this also allows us to support an optimisation the MMU provides
on GK104 and newer.
Certain operations can now be combined into a single page tree walk
to avoid some overhead, but also enables optimsations like skipping
PTE unmap writes when the PT will be destroyed anyway.
The old backend has been hacked up to forward requests onto the new
backend, if present, so that it's possible to bisect between issues
in the backend changes vs the upcoming frontend changes.
Until the new frontend has been merged, new backends will leak BAR2
page tables on module unload. This is expected, and it's not worth
the effort of hacking around this as it doesn't effect runtime.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
To avoid wasting compression tags when using 64KiB pages, we need to
enable this so we can select between upper/lower comptagline in PTEs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If NV_PFB_MMU_CTRL_USE_FULL_COMP_TAG_LINE is TRUE, then the last bit of
NV_MMU_PTE_COMPTAGLINE is re-purposed to select the upper/lower half of
a compression tag when using 64KiB big pages.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We previously required each VMM user to allocate their own page directory
and fill in the instance block themselves.
It makes more sense to handle this in a common location.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adds support for:
- Selection of old/new-style page table layout (GP100MmuLayout=0/1).
- System-memory PDs.
New layout disabled by default for the moment, as we don't have a
backend that can handle it yet.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is the first chunk of the new VMM code that provides the structures
needed to describe a GPU virtual address-space layout, as well as common
interfaces to handle VMM creation, and connecting instances to a VMM.
The constructor now allocates the PD itself, rather than having the user
handle that manually. This won't/can't be used until after all backends
have been ported to these interfaces, so a little bit of memory will be
wasted on Fermi and newer for a couple of commits in the series.
Compatibility has been hacked into the old code to allow each GPU backend
to be ported individually.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP100 "big" (which is a funny name, when it supports "even bigger") page
tables are small enough that we want to be able to suballocate them from
a larger block of memory.
This builds on the previous page table cache interfaces so that the VMM
code doesn't need to know the difference.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Builds up and maintains a small cache of each page table size in order
to reduce the frequency of expensive allocations, particularly in the
pathological case where an address range ping-pongs between allocated
and free.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Removes the need to expose internals outside of MMU, and GP100 is both
different, and a lot harder to deal with.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Another transition step to allow finer-grained patches transitioning to
new MMU backends.
Old backends will continue operate as before (accessing nvkm_mem::tag),
and new backends will get a reference to the tags allocated here.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Upcoming MMU changes use nvkm_memory as its basic representation of memory,
so we need to be able to allocate VRAM like this.
The code is basically identical to the current chipset-specific allocators,
minus support for compression tags (which will be handled elsewhere anyway).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We need to be able to prevent memory from being freed while it's still
mapped in a GPU's address-space.
Will be used by upcoming MMU changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Map flags (access, kind, etc) are currently defined in either the VMA,
or the memory object, which turns out to not be ideal for things like
suballocated buffers, etc.
These will become per-map flags instead, so we need to support passing
these arguments in nvkm_memory_map().
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nvkm_memory is going to be used by the upcoming mmu rework for the basic
representation of a memory allocation, as such, this commit adds support
for comptag allocation to nvkm_memory.
This is very simple for now, in that it requires comptags for the entire
memory allocation even if only certain ranges are compressed.
Support for tracking ranges will be added at a later date.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We're moving towards having a central place to handle comptag allocation,
and as some GPUs don't have a ram submodule (ie. Tegra), we need to move
the mm somewhere else.
It probably never belonged in ram anyways.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Different sections of VRAM may have different properties (ie. can't be used
for compression/display, can't be mapped, etc).
We currently already support this, but it's a bit magic. This change makes
it more obvious where we're allocating from.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Before: "imem: init completed in 299277us"
After: "imem: init completed in 11574us"
Suspend from Fedora 26 gnome desktop on GP102.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Before: "imem: suspend completed in 5540487us"
After: "imem: suspend completed in 1871526us"
Suspend from Fedora 26 gnome desktop on GP102.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A good deal of the structures we map into here aren't accessed very often
at all, and Fedora 26 has exposed an issue where after creating a heap of
channels, BAR2 space would run out, and we'd need to make use of the slow
path while accessing important structures like page tables.
This implements an LRU on BAR2 space, which allows eviction of mappings
that aren't currently needed, to make space for other objects.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Another piece of solving the "GP100 BAR2 VMM bootstrap" puzzle.
Without doing this, we'd attempt to write PDEs for the lower page table
levels through BAR2 before BAR2 access has been fully initialised.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is not as simple as it was for earlier GPUs, due to the need to swap
accessor functions depending on whether BAR2 is usable or not.
We were previously protected by nvkm_instobj's accessor functions keeping
an object mapped permanently, with some unclear magic that managed to hit
the slow-path where needed even if an object was marked as mapped.
That's been replaced here by reference counting maps (some objects, like
page tables can be accessed concurrently), and swapping the functions as
necessary.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is to simplify upcoming changes. The slow-path is something that
currently occurs during bootstrap of the BAR2 VMM, while backing up an
object during suspend/resume, or when BAR2 address space runs out.
The latter is a real problem that can happen at runtime, and occurs in
Fedora 26 already (due to some change that causes a lot of channels to
be created at login), so ideally we'd prefer not to make it any slower.
We'd also like suspend/resume speed to not suffer.
Upcoming commits will solve those problems in a better way, making the
extra overhead of moving the locking here a non-issue.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The accessor functions can change as a result of acquire()/release() calls,
and are protected by any refcounting done there.
Other functions must remain constant, as they can be called any time.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Discovered by accident while working to use BAR2 access to instmem objects
on more paths.
We've apparently been relying on luck up until now!
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP100's page table nests a lot more deeply than the GF100-compatible
layout we're currently using, which means our hackish-but-simple way
of dealing with BAR2 VMM teardown won't work anymore.
In order to sanely handle the chicken-and-egg (BAR2's PTs get mapped
into themselves) problem, we need prevent page tables getting mapped
back into BAR2 during the destruction of its VMM.
To do this, we simply key off the state that's now maintained by the
BAR2 init/fini functions.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Upcoming changes will remove the nvkm_vmm pointer from nvkm_vma, instead
requiring it to be explicitly specified on each operation.
It's not currently possible to get this information for BAR1 mappings,
so let's fix that ahead of time.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Will prevent spurious MMU fault interrupts if something decides to touch
BAR1 after we've unloaded the driver.
Exposed external to BAR so that INSTMEM can use it to better control the
suspend/resume fast-path access.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If we want to be able to hit the instmem fast-path in a few trickier cases,
we need to be more flexible with when we can initialise BAR2 access.
There's probably a decent case to be made for merging BAR/INSTMEM into BUS,
but that's something to ponder another day.
Flushes have been added after the write to bind the instance block,
as later commits will reveal the need for them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Will prevent spurious MMU fault interrupts if something decides to touch
BAR1 after we've unloaded the driver.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
BAR2 being done for practical reasons, this is just for consistency.
Flushes have been added after the write to bind the instance block,
as later commits will reveal the need for them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
NVIDIA call it BAR2, Linux APIs treat it as BAR3 due to BAR1 being a
64-bit BAR, which I presume take two slots or something.
No actual code changes here, just to make future commits less messy.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Will already be done by MMU as a result of the PT writes that occur
during BAR2 bootstrapping.
This is likely just a left-over from the days when it was hardcoded.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
RM appears to do this really early in its initialisation, before DEVINIT.
We currently do this before BAR2 initialisation for some reason.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
MMU will be needing this to specify kind info on BAR mappings.
We have no userspace currently using these interfaces, so break the ABI
instead of supporting both. NVIF version bump so any future use can be
guarded.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is useless to re-invent it.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
v2:
- add nv138 and drop nv13b chipsets (Ilia Mirkin)
- refactor out status variable and instead mask tsensor (Ilia Mirkin)
- switch SHADOWed state message away from nvkm_error() (Ilia Mirkin)
- rename internal temperature variable (Karol Herbst)
v3:
- use nvkm_trace() for SHADOWed state message (Ben Skeggs)
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
G92's seem to require some additional bit of initialization before the
BSP engine can work. It feels like clocks are not set up for the
underlying VLD engine, which means that all commands submitted to the
xtensa chip end up hanging. VP seems to work fine though.
This still allows people to force-enable the bsp engine if they want to
play around with it, but makes it harder for the card to hang by
default.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Even though we've zeroed the PDE, the GPU may have cached the PD, so we
need to flush when deleting them.
Noticed while working on replacement MMU code, but a backport might be a
good idea, so let's fix it in the current code too.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
It appears that MSI does not work on either G5 PPC nor on a E5500-based
platform, where other hardware is reported to work fine with MSI.
Both tests were conducted with NV4x hardware, so perhaps other (or even
this) hardware can be made to work. It's still possible to force-enable
with config=NvMSI=1 on load.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Useful for testing, and for the userspace build where we can't kick
a framebuffer driver off the device.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Forked from GP107 implementation. Secboot/gr left out as we don't have
signed blobs from NVIDIA in linux-firmware.
(Ben): Was unable to mmiotrace the binary driver for unknown reasons,
so not able to 100% confirm that no other changes from GP107
are needed. Quick testing shows it seems to work well enough
for display. Due to NVIDIA dragging their heels on getting
signed firmware to us, this is the best we can do for now.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Most of these errors seem to be WFD related. Official documentation
says dcb type 8 is reserved. It's probably used for WFD. Silence
the warning in either case.
Connector type 70 is stated to be a virtual connector for WiFi
display. Since we know this, don't warn that we don't.
Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The NV_PMC_ENABLE bit for PMU did not appear until GF100, and some other
unknown register needs to be poked instead.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
An upcoming commit will replace direct NV_PMC register bashing from PMU
with a call to the proper function.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We assume that each board has 4 heads for GF119+. However this is not
necessarily true - in the case of a GP108 board, the register indicated
that there were only 2.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Array thresolds should be named thresholds, rename it. Also make it static
static const char * const
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes hitting WARN_ON() during initialisation of pre-NV50 GPUs, caused
by the recent changes to support pad macro routing on GM20x.
We currently don't use them here for older GPUs anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Bit 30 being set causes the upper half of BAR2 to stay in physical mode,
mapped over the end of VRAM, even when the rest of the BAR has been set
to virtual mode.
We inherited our initial value from RM, but I'm not aware of any reason
we need to keep it that way.
This fixes severe GPU hang/lockup issues revealed by Wayland on F26.
Shout-out to NVIDIA for the quick response with the potential cause!
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org # 4.3+
GP102's cursors go from chan 17..20. Increase the array size to hold
their data properly.
Fixes: e50fcff15f ("drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We don't support them on G80, but we need to add them to the mapping to
avoid triggering a WARN_ON() on GPUs where the ports are present.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since switching the I2C-over-AUX helpers, there have been regressions on
some display combinations due to us not having support for "address only"
transactions.
This commits enables support for them for GF119 and newer.
Earlier GPUs have been reverted to a custom I2C-over-AUX algorithm.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-----BEGIN PGP SIGNATURE-----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=2S5N
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm, I think I've got one later
driver pull for mediatek SoC driver, I'm undecided on if it needs to
go to you yet.
Otherwise summary below:
Core drm:
- Atomic add driver private objects
- Deprecate preclose hook in modern drivers
- MST bandwidth tracking
- Use kvmalloc in more places
- Add mode_valid hook for crtc/encoder/bridge
- Reduce sync_file construction time
- Documentation updates
- New DRM synchronisation object support
New drivers:
- pl111 - pl111 CLCD display controller
Panel:
- Innolux P079ZCA panel driver
- Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
- panel-samsung-s6e3ha2: Add s6e3hf2 panel support
i915:
- SKL+ watermark fixes
- G4x/G33 reset improvements
- DP AUX backlight improvements
- Buffer based GuC/host communication
- New getparam for (sub)slice infomation
- Cannonlake and Coffeelake initial patches
- Execbuf optimisations
radeon/amdgpu:
- Lots of Vega10 bug fixes
- Preliminary raven support
- KIQ support for compute rings
- MEC queue management rework
- DCE6 Audio support
- SR-IOV improvements
- Better radeon/amdgpu selection support
nouveau:
- HDMI stereoscopic support
- Display code rework for >= GM20x GPUs
msm:
- GEM rework for fine-grained locking
- Per-process pagetable work
- HDMI fixes for Snapdragon 820.
vc4:
- Remove 256MB CMA limit from vc4
- Add out-fence support
- Add support for cygnus
- Get/set tiling ioctls support
- Add T-format tiling support for scanout
zte:
- add VGA support.
etnaviv:
- Thermal throttle support for newer GPUs
- Restore userspace buffer cache performance
- dma-buf sync fix
stm:
- add stm32f429 display support
exynos:
- Rework vblank handling
- Fixup sw-trigger code
sun4i:
- V3s display engine support
- HDMI support for older SoCs
- Preliminary work on dual-pipeline SoCs.
rcar-du:
- VSP work
imx-drm:
- Remove counter load enable from PRE
- Double read/write reduction flag support
tegra:
- Documentation for the host1x and drm driver.
- Lots of staging ioctl fixes due to grate project work.
omapdrm:
- dma-buf fence support
- TILER rotation fixes"
* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
amdgpu: Set cik/si_support to 1 by default if radeon isn't built
drm/amdgpu/gfx9: fix driver reload with KIQ
drm/amdgpu/gfx8: fix driver reload with KIQ
drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
drm/ttm: Fix use-after-free in ttm_bo_clean_mm
drm/amd/amdgpu: move get memory type function from early init to sw init
drm/amdgpu/cgs: always set reference clock in mode_info
drm/amdgpu: fix vblank_time when displays are off
drm/amd/powerplay: power value format change for Vega10
drm/amdgpu/gfx9: support the amdgpu.disable_cu option
drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
drm/amdgpu/cs: fix a typo in a comment
drm/amdgpu: Fix the exported always on CU bitmap
drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
drm/amd/powerplay/cz: print message if smc message fails
drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
...
- introduce the new uuid_t/guid_t types that are going to replace
the somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS
and libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)
-----BEGIN PGP SIGNATURE-----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=J/4P
-----END PGP SIGNATURE-----
Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid
Pull uuid subsystem from Christoph Hellwig:
"This is the new uuid subsystem, in which Amir, Andy and I have started
consolidating our uuid/guid helpers and improving the types used for
them. Note that various other subsystems have pulled in this tree, so
I'd like it to go in early.
UUID/GUID summary:
- introduce the new uuid_t/guid_t types that are going to replace the
somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS and
libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)"
* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
ACPI: hns_dsaf_acpi_dsm_guid can be static
mmc: sdhci-pci: make guid intel_dsm_guid static
uuid: Take const on input of uuid_is_null() and guid_is_null()
thermal: int340x_thermal: fix compile after the UUID API switch
thermal: int340x_thermal: Switch to use new generic UUID API
acpi: always include uuid.h
ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
ACPI / extlog: Switch to use new generic UUID API
ACPI / bus: Switch to use new generic UUID API
ACPI / APEI: Switch to use new generic UUID API
acpi, nfit: Switch to use new generic UUID API
MAINTAINERS: add uuid entry
tmpfs: generate random sb->s_uuid
scsi_debug: switch to uuid_t
nvme: switch to uuid_t
sysctl: switch to use uuid_t
partitions/ldm: switch to use uuid_t
overlayfs: use uuid_t instead of uuid_be
fs: switch ->s_uuid to uuid_t
ima/policy: switch to use uuid_t
...
On Tegra186 systems with certain firmware revisions, leaving the GPU in
reset can cause a hang. To prevent this, don't leave the GPU in reset.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On Tegra186, powergating is handled by the BPMP power domain provider
and the "legacy" powergating API is not available. Therefore skip
these calls if we are attached to a power domain.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This shouldn't have been needed ever since we started executing the
DisableLT script when shutting down heads.
Testing of the board this was originally written for seems to agree.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Training/Untraining will be hooked up to the routing logic, which
doesn't allow us to pass in a data rate.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These exist to give NVKM information on the set of display paths that
the DD needs to be active at any given time.
Previously, the supervisor attempted to determine this solely from OR
state, but there's a few configurations where this information on its
own isn't enough to determine the specific display paths in question:
- ANX9805, where the PIOR protocol for both DP and TMDS is TMDS.
- On a device using DCB Switched Outputs.
- On GM20x and newer, with a crossbar between the SOR and macro links.
After this commit, the DD tells NVKM *exactly* which display path it's
attempting a modeset on.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
All of the necessary hw-specific logic is now handled at the output
resource level, so all of this can go away.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Also removes the user-facing methods to these controls, as they're not
currently utilised by the DD anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This essentially (unless the link becomes unstable and needs to be
re-trained) gives us a single entry-point to link training, during
supervisor handling, where we can ensure all routing is up to date.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
An upcoming commit will limit link training to only when the sink is
meant to be displaying an image.
We still need IRQs enabled even when the link isn't trained (for MST
messages), but don't want to train the link unnecessarily.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The aim here is to protect the OR against locking up when something
unexpected happens (such as the display disappearing during modeset,
or the DD misbehaving).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This struct doesn't hold link configuration data anymore, so we can
limit its use to internal DP training (anx9805 handles training for
external DP).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This hasn't been used since atomic.
We may want to re-implement "fast" DPMS at some point, but for now,
this just gets in the way.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This essentially replicates our current behaviour in a way that's
compatible with the new model that's emerging, so that we're able
to start porting the hw-specific functions to it.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Upcoming commits make supervisor handling share code between the NV50
and GF119 implementations. Because of this, and a few other cleanups,
we need to allow some additional customisation.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In order to properly support the SOR -> SOR + pad macro separation
that occurred with GM20x GPUs, we need to separate OR handling out
of the output path code.
This will be used as the base to support ORs (DAC, SOR, PIOR).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Primarily intended as a way to pass per-head state around during
supervisor handling, and share logic between NV50/GF119.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is to allow hw-specific code to instantiate output resources first,
so we can cull unsupported output paths based on them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Not all users of nvkm_output_dp have been changed here. The remaining
ones belong to code that's disappearing in upcoming commits.
This also modifies the debug level of some messages.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This isn't technically "output", but, "display/output path".
Not all users of nvkm_output have been changed here. The remaining
ones belong to code that's disappearing in upcoming commits.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Upcoming changes to split OR from output path drastically change the
placement of various operations.
In order to make the real changes clearer, do the moving around part
ahead of time.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
As of DCB 4.1, these are not the same thing.
Compatibility temporarily in place until callers have been updated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We already have a subdev pointer, from which we can locate the device's
BIOS subdev. No need for a separate pointer.
Structure/callers not updated yet, as I want to batch more changes and
only touch the callers once.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nvkm_timer_alarm() already handles this as part of protecting against
callers passing in no timeout value.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
I only saw those values inside the vbios: 0xff, 0xfd, 0xfc, 0xfa for valid
rails.
No idea what the lower value does, but at least we get power readings on
a lot of Fermi GPUs with that.
v2: add missing parentheses
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is according to what we have in nvbios.
Fixes "ERROR: Can't get value of subfeature in0_min: Can't read" errors
in sensors for some GPUs.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.
While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic"?) InfoFrame.
Also don't enable any InfoFrame that is not provided, and disable
the Vendor InfoFrame when disabling the output.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.
While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic"?) InfoFrame.
Also don't enable any InfoFrame that is not provided, and disable
the Vendor InfoFrame when disabling the output.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.
While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic") InfoFrame.
Also don't enable any AVI or Vendor InfoFrame that is not provided,
and disable the Vendor InfoFrame when disabling the output.
Ignore the Audio InfoFrame: We don't supply it, and altering HDMI
audio semantics (for better or worse) on this hardware is out of
scope for me at this time.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.
While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic"?) InfoFrame.
Also don't enable any AVI or Vendor InfoFrame that is not provided,
and disable the Vendor InfoFrame when disabling the output.
Ignore the Audio InfoFrame: We don't supply it, and altering HDMI
audio semantics (for better or worse) on this hardware is out of
scope for me at this time.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
HDMI InfoFrames are passed to NVKM as bags of bytes, but the
hardware needs them to be packed into words. Rather than having
four (or more) copies of the packing logic introduce a single copy
now, in a central place.
We currently need these for AVI and Vendor InfoFrames, but we may
also expect to need them for Audio InfoFrames at some point.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The nouveau driver, in the Linux 3.7 days, used to try and set the
AVI InfoFrame based on the selected display mode. These days, it
uses a fixed set of InfoFrames. Start to correct that, by
providing a mechanism whereby InfoFrame data may be passed to the
NVKM functions that do the actual configuration.
At this point, only establish the new parameters and their parsing,
don't actually use the data anywhere yet (since it's not supplied
anywhere).
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16
bytes. Instead we convert them to use guid_t type. At the same time we
convert current users.
acpi_str_to_uuid() becomes useless after the conversion and it's safe to
get rid of it.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reusing the list_head for both is a bad idea. Callback execution is done
with the lock dropped so that alarms can be rescheduled from the callback,
which means that with some unfortunate timing, lists can get corrupted.
The execution list should not require its own locking, the single function
that uses it can only be called from a single context.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Presumably we can never actually hit this return, but static checkers
complain that we should unlock before we return.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The last goto looks spurious because it releases less resources than the
previous one.
Also free 'img->sig' if 'ls_ucode_img_build()' fails.
Fixes: 9d896f3e41 ("drm/nouveau/secboot: abstract LS firmware loading functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These were ineffective due to touching the list without the alarm lock,
but should no longer be required.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
The idea here was to avoid having to "manually" program the HW if there's
a new earliest alarm. This was lazy and bad, as it leads to loads of fun
races between inter-related callers (ie. therm).
Turns out, it's not so difficult after all. Go figure ;)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
At least therm/fantog "attempts" to work around this issue, which could
lead to corruption of the pending alarm list.
Fix it properly by not updating the timestamp without the lock held, or
trying to add an already pending alarm to the pending alarm list....
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
