forked from Minki/linux
a06ad3c0c7
482 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
John Hubbard
|
f728b9c48d |
mm: change lookup_node() to use get_user_pages_fast()
The purpose of calling get_user_pages_locked() from lookup_node() was to allow for unlocking the mmap_lock when reading a page from the disk during a page fault (hidden behind VM_FAULT_RETRY). The idea was to reduce contention on the heavily-used mmap_lock. (Thanks to Jan Kara for clearly pointing that out, and in fact I've used some of his wording here.) However, it is unlikely for lookup_node() to take a page fault. With that in mind, change over to calling get_user_pages_fast(). This simplifies the code, runs a little faster in the expected case, and allows removing get_user_pages_locked() entirely, in a subsequent patch. Link: https://lkml.kernel.org/r/20220204020010.68930-5-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Suren Baghdasaryan
|
5c26f6ac94 |
mm: refactor vm_area_struct::anon_vma_name usage code
Avoid mixing strings and their anon_vma_name referenced pointers by using struct anon_vma_name whenever possible. This simplifies the code and allows easier sharing of anon_vma_name structures when they represent the same name. [surenb@google.com: fix comment] Link: https://lkml.kernel.org/r/20220223153613.835563-1-surenb@google.com Link: https://lkml.kernel.org/r/20220224231834.1481408-1-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Colin Cross <ccross@google.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Alexey Gladkov <legion@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Chris Hyser <chris.hyser@oracle.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Collingbourne <pcc@google.com> Cc: Xiaofeng Cao <caoxiaofeng@yulong.com> Cc: David Hildenbrand <david@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Randy Dunlap
|
dad5b02329 |
mm/mempolicy: fix all kernel-doc warnings
Fix kernel-doc warnings in mempolicy.c: mempolicy.c:139: warning: No description found for return value of 'numa_map_to_online_node' mempolicy.c:2165: warning: Excess function parameter 'node' description in 'alloc_pages_vma' mempolicy.c:2973: warning: No description found for return value of 'mpol_parse_str' Link: https://lkml.kernel.org/r/20211213233216.5477-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Aneesh Kumar K.V
|
c6018b4b25 |
mm/mempolicy: add set_mempolicy_home_node syscall
This syscall can be used to set a home node for the MPOL_BIND and
MPOL_PREFERRED_MANY memory policy. Users should use this syscall after
setting up a memory policy for the specified range as shown below.
mbind(p, nr_pages * page_size, MPOL_BIND, new_nodes->maskp,
new_nodes->size + 1, 0);
sys_set_mempolicy_home_node((unsigned long)p, nr_pages * page_size,
home_node, 0);
The syscall allows specifying a home node/preferred node from which
kernel will fulfill memory allocation requests first.
For address range with MPOL_BIND memory policy, if nodemask specifies
more than one node, page allocations will come from the node in the
nodemask with sufficient free memory that is closest to the home
node/preferred node.
For MPOL_PREFERRED_MANY if the nodemask specifies more than one node,
page allocation will come from the node in the nodemask with sufficient
free memory that is closest to the home node/preferred node. If there
is not enough memory in all the nodes specified in the nodemask, the
allocation will be attempted from the closest numa node to the home node
in the system.
This helps applications to hint at a memory allocation preference node
and fallback to _only_ a set of nodes if the memory is not available on
the preferred node. Fallback allocation is attempted from the node
which is nearest to the preferred node.
This helps applications to have control on memory allocation numa nodes
and avoids default fallback to slow memory NUMA nodes. For example a
system with NUMA nodes 1,2 and 3 with DRAM memory and 10, 11 and 12 of
slow memory
new_nodes = numa_bitmask_alloc(nr_nodes);
numa_bitmask_setbit(new_nodes, 1);
numa_bitmask_setbit(new_nodes, 2);
numa_bitmask_setbit(new_nodes, 3);
p = mmap(NULL, nr_pages * page_size, protflag, mapflag, -1, 0);
mbind(p, nr_pages * page_size, MPOL_BIND, new_nodes->maskp, new_nodes->size + 1, 0);
sys_set_mempolicy_home_node(p, nr_pages * page_size, 2, 0);
This will allocate from nodes closer to node 2 and will make sure the
kernel will only allocate from nodes 1, 2, and 3. Memory will not be
allocated from slow memory nodes 10, 11, and 12. This differs from
default MPOL_BIND behavior in that with default MPOL_BIND the allocation
will be attempted from node closer to the local node. One of the
reasons to specify a home node is to allow allocations from cpu less
NUMA node and its nearby NUMA nodes.
With MPOL_PREFERRED_MANY on the other hand will first try to allocate
from the closest node to node 2 from the node list 1, 2 and 3. If those
nodes don't have enough memory, kernel will allocate from slow memory
node 10, 11 and 12 which ever is closer to node 2.
Link: https://lkml.kernel.org/r/20211202123810.267175-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ben Widawsky <ben.widawsky@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Aneesh Kumar K.V
|
c045511621 |
mm/mempolicy: use policy_node helper with MPOL_PREFERRED_MANY
Patch series "mm: add new syscall set_mempolicy_home_node", v6. This patch (of 3): A followup patch will enable setting a home node with MPOL_PREFERRED_MANY memory policy. To facilitate that switch to using policy_node helper. There is no functional change in this patch. Link: https://lkml.kernel.org/r/20211202123810.267175-1-aneesh.kumar@linux.ibm.com Link: https://lkml.kernel.org/r/20211202123810.267175-2-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Ben Widawsky <ben.widawsky@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: <linux-api@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
be1a13eb51 |
mm: drop node from alloc_pages_vma
alloc_pages_vma is meant to allocate a page with a vma specific memory policy. The initial node parameter is always a local node so it is pointless to waste a function argument for this. Drop the parameter. Link: https://lkml.kernel.org/r/YaSnlv4QpryEpesG@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Ben Widawsky <ben.widawsky@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Colin Cross
|
9a10064f56 |
mm: add a field to store names for private anonymous memory
In many userspace applications, and especially in VM based applications like Android uses heavily, there are multiple different allocators in use. At a minimum there is libc malloc and the stack, and in many cases there are libc malloc, the stack, direct syscalls to mmap anonymous memory, and multiple VM heaps (one for small objects, one for big objects, etc.). Each of these layers usually has its own tools to inspect its usage; malloc by compiling a debug version, the VM through heap inspection tools, and for direct syscalls there is usually no way to track them. On Android we heavily use a set of tools that use an extended version of the logic covered in Documentation/vm/pagemap.txt to walk all pages mapped in userspace and slice their usage by process, shared (COW) vs. unique mappings, backing, etc. This can account for real physical memory usage even in cases like fork without exec (which Android uses heavily to share as many private COW pages as possible between processes), Kernel SamePage Merging, and clean zero pages. It produces a measurement of the pages that only exist in that process (USS, for unique), and a measurement of the physical memory usage of that process with the cost of shared pages being evenly split between processes that share them (PSS). If all anonymous memory is indistinguishable then figuring out the real physical memory usage (PSS) of each heap requires either a pagemap walking tool that can understand the heap debugging of every layer, or for every layer's heap debugging tools to implement the pagemap walking logic, in which case it is hard to get a consistent view of memory across the whole system. Tracking the information in userspace leads to all sorts of problems. It either needs to be stored inside the process, which means every process has to have an API to export its current heap information upon request, or it has to be stored externally in a filesystem that somebody needs to clean up on crashes. It needs to be readable while the process is still running, so it has to have some sort of synchronization with every layer of userspace. Efficiently tracking the ranges requires reimplementing something like the kernel vma trees, and linking to it from every layer of userspace. It requires more memory, more syscalls, more runtime cost, and more complexity to separately track regions that the kernel is already tracking. This patch adds a field to /proc/pid/maps and /proc/pid/smaps to show a userspace-provided name for anonymous vmas. The names of named anonymous vmas are shown in /proc/pid/maps and /proc/pid/smaps as [anon:<name>]. Userspace can set the name for a region of memory by calling prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME, start, len, (unsigned long)name) Setting the name to NULL clears it. The name length limit is 80 bytes including NUL-terminator and is checked to contain only printable ascii characters (including space), except '[',']','\','$' and '`'. Ascii strings are being used to have a descriptive identifiers for vmas, which can be understood by the users reading /proc/pid/maps or /proc/pid/smaps. Names can be standardized for a given system and they can include some variable parts such as the name of the allocator or a library, tid of the thread using it, etc. The name is stored in a pointer in the shared union in vm_area_struct that points to a null terminated string. Anonymous vmas with the same name (equivalent strings) and are otherwise mergeable will be merged. The name pointers are not shared between vmas even if they contain the same name. The name pointer is stored in a union with fields that are only used on file-backed mappings, so it does not increase memory usage. CONFIG_ANON_VMA_NAME kernel configuration is introduced to enable this feature. It keeps the feature disabled by default to prevent any additional memory overhead and to avoid confusing procfs parsers on systems which are not ready to support named anonymous vmas. The patch is based on the original patch developed by Colin Cross, more specifically on its latest version [1] posted upstream by Sumit Semwal. It used a userspace pointer to store vma names. In that design, name pointers could be shared between vmas. However during the last upstreaming attempt, Kees Cook raised concerns [2] about this approach and suggested to copy the name into kernel memory space, perform validity checks [3] and store as a string referenced from vm_area_struct. One big concern is about fork() performance which would need to strdup anonymous vma names. Dave Hansen suggested experimenting with worst-case scenario of forking a process with 64k vmas having longest possible names [4]. I ran this experiment on an ARM64 Android device and recorded a worst-case regression of almost 40% when forking such a process. This regression is addressed in the followup patch which replaces the pointer to a name with a refcounted structure that allows sharing the name pointer between vmas of the same name. Instead of duplicating the string during fork() or when splitting a vma it increments the refcount. [1] https://lore.kernel.org/linux-mm/20200901161459.11772-4-sumit.semwal@linaro.org/ [2] https://lore.kernel.org/linux-mm/202009031031.D32EF57ED@keescook/ [3] https://lore.kernel.org/linux-mm/202009031022.3834F692@keescook/ [4] https://lore.kernel.org/linux-mm/5d0358ab-8c47-2f5f-8e43-23b89d6a8e95@intel.com/ Changes for prctl(2) manual page (in the options section): PR_SET_VMA Sets an attribute specified in arg2 for virtual memory areas starting from the address specified in arg3 and spanning the size specified in arg4. arg5 specifies the value of the attribute to be set. Note that assigning an attribute to a virtual memory area might prevent it from being merged with adjacent virtual memory areas due to the difference in that attribute's value. Currently, arg2 must be one of: PR_SET_VMA_ANON_NAME Set a name for anonymous virtual memory areas. arg5 should be a pointer to a null-terminated string containing the name. The name length including null byte cannot exceed 80 bytes. If arg5 is NULL, the name of the appropriate anonymous virtual memory areas will be reset. The name can contain only printable ascii characters (including space), except '[',']','\','$' and '`'. This feature is available only if the kernel is built with the CONFIG_ANON_VMA_NAME option enabled. [surenb@google.com: docs: proc.rst: /proc/PID/maps: fix malformed table] Link: https://lkml.kernel.org/r/20211123185928.2513763-1-surenb@google.com [surenb: rebased over v5.15-rc6, replaced userpointer with a kernel copy, added input sanitization and CONFIG_ANON_VMA_NAME config. The bulk of the work here was done by Colin Cross, therefore, with his permission, keeping him as the author] Link: https://lkml.kernel.org/r/20211019215511.3771969-2-surenb@google.com Signed-off-by: Colin Cross <ccross@google.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Glauber <jan.glauber@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Landley <rob@landley.net> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Shaohua Li <shli@fusionio.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Andrey Ryabinin
|
3386353406 |
mm: mempolicy: fix THP allocations escaping mempolicy restrictions
alloc_pages_vma() may try to allocate THP page on the local NUMA node
first:
page = __alloc_pages_node(hpage_node,
gfp | __GFP_THISNODE | __GFP_NORETRY, order);
And if the allocation fails it retries allowing remote memory:
if (!page && (gfp & __GFP_DIRECT_RECLAIM))
page = __alloc_pages_node(hpage_node,
gfp, order);
However, this retry allocation completely ignores memory policy nodemask
allowing allocation to escape restrictions.
The first appearance of this bug seems to be the commit
|
||
Linus Torvalds
|
512b7931ad |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ... |
||
Yang Shi
|
20f9ba4f99 |
mm: migrate: make demotion knob depend on migration
The memory demotion needs to call migrate_pages() to do the jobs. And it is controlled by a knob, however, the knob doesn't depend on CONFIG_MIGRATION. The knob could be truned on even though MIGRATION is disabled, this will not cause any crash since migrate_pages() would just return -ENOSYS. But it is definitely not optimal to go through demotion path then retry regular swap every time. And it doesn't make too much sense to have the knob visible to the users when !MIGRATION. Move the related code from mempolicy.[h|c] to migrate.[h|c]. Link: https://lkml.kernel.org/r/20211015005559.246709-1-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: "Huang, Ying" <ying.huang@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Chen Wandun
|
c00b6b9610 |
mm/vmalloc: introduce alloc_pages_bulk_array_mempolicy to accelerate memory allocation
Commit
|
||
|
Linus Torvalds
|
49f8275c7d |
Memory folios
Add memory folios, a new type to represent either order-0 pages or the head page of a compound page. This should be enough infrastructure to support filesystems converting from pages to folios. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmF9uI0ACgkQDpNsjXcp gj7MUAf/R7LCZ+xFiIedw7SAgb/DGK0C9uVjuBEIZgAw21ZUw/GuPI6cuKBMFGGf rRcdtlvMpwi7yZJcoNXxaqU/xPaaJMjf2XxscIvYJP1mjlZVuwmP9dOx0neNvWOc T+8lqR6c1TLl82lpqIjGFLwvj2eVowq2d3J5jsaIJFd4odmmYVInrhJXOzC/LQ54 Niloj5ksehf+KUIRLDz7ycppvIHhlVsoAl0eM2dWBAtL0mvT7Nyn/3y+vnMfV2v3 Flb4opwJUgTJleYc16oxTn9svT2yS8q2uuUemRDLW8ABghoAtH3fUUk43RN+5Krd LYCtbeawtkikPVXZMfWybsx5vn0c3Q== =7SBe -----END PGP SIGNATURE----- Merge tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache Pull memory folios from Matthew Wilcox: "Add memory folios, a new type to represent either order-0 pages or the head page of a compound page. This should be enough infrastructure to support filesystems converting from pages to folios. The point of all this churn is to allow filesystems and the page cache to manage memory in larger chunks than PAGE_SIZE. The original plan was to use compound pages like THP does, but I ran into problems with some functions expecting only a head page while others expect the precise page containing a particular byte. The folio type allows a function to declare that it's expecting only a head page. Almost incidentally, this allows us to remove various calls to VM_BUG_ON(PageTail(page)) and compound_head(). This converts just parts of the core MM and the page cache. For 5.17, we intend to convert various filesystems (XFS and AFS are ready; other filesystems may make it) and also convert more of the MM and page cache to folios. For 5.18, multi-page folios should be ready. The multi-page folios offer some improvement to some workloads. The 80% win is real, but appears to be an artificial benchmark (postgres startup, which isn't a serious workload). Real workloads (eg building the kernel, running postgres in a steady state, etc) seem to benefit between 0-10%. I haven't heard of any performance losses as a result of this series. Nobody has done any serious performance tuning; I imagine that tweaking the readahead algorithm could provide some more interesting wins. There are also other places where we could choose to create large folios and currently do not, such as writes that are larger than PAGE_SIZE. I'd like to thank all my reviewers who've offered review/ack tags: Christoph Hellwig, David Howells, Jan Kara, Jeff Layton, Johannes Weiner, Kirill A. Shutemov, Michal Hocko, Mike Rapoport, Vlastimil Babka, William Kucharski, Yu Zhao and Zi Yan. I'd also like to thank those who gave feedback I incorporated but haven't offered up review tags for this part of the series: Nick Piggin, Mel Gorman, Ming Lei, Darrick Wong, Ted Ts'o, John Hubbard, Hugh Dickins, and probably a few others who I forget" * tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache: (90 commits) mm/writeback: Add folio_write_one mm/filemap: Add FGP_STABLE mm/filemap: Add filemap_get_folio mm/filemap: Convert mapping_get_entry to return a folio mm/filemap: Add filemap_add_folio() mm/filemap: Add filemap_alloc_folio mm/page_alloc: Add folio allocation functions mm/lru: Add folio_add_lru() mm/lru: Convert __pagevec_lru_add_fn to take a folio mm: Add folio_evictable() mm/workingset: Convert workingset_refault() to take a folio mm/filemap: Add readahead_folio() mm/filemap: Add folio_mkwrite_check_truncate() mm/filemap: Add i_blocks_per_folio() mm/writeback: Add folio_redirty_for_writepage() mm/writeback: Add folio_account_redirty() mm/writeback: Add folio_clear_dirty_for_io() mm/writeback: Add folio_cancel_dirty() mm/writeback: Add folio_account_cleaned() mm/writeback: Add filemap_dirty_folio() ... |
||
Eric Dumazet
|
6d2aec9e12 |
mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind()
syzbot reported access to unitialized memory in mbind() [1] Issue came with commit |
||
Matthew Wilcox (Oracle)
|
cc09cb1341 |
mm/page_alloc: Add folio allocation functions
The __folio_alloc(), __folio_alloc_node() and folio_alloc() functions are mostly for type safety, but they also ensure that the page allocator allocates a compound page and initialises the deferred list if the page is large enough to have one. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Linus Torvalds
|
a3fa7a101d |
Merge branches 'akpm' and 'akpm-hotfixes' (patches from Andrew)
Merge yet more updates and hotfixes from Andrew Morton:
"Post-linux-next material, based upon latest upstream to catch the
now-merged dependencies:
- 10 patches.
Subsystems affected by this patch series: mm (vmstat and migration)
and compat.
And bunch of hotfixes, mostly cc:stable:
- 8 patches.
Subsystems affected by this patch series: mm (hmm, hugetlb, vmscan,
pagealloc, pagemap, kmemleak, mempolicy, and memblock)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
arch: remove compat_alloc_user_space
compat: remove some compat entry points
mm: simplify compat numa syscalls
mm: simplify compat_sys_move_pages
kexec: avoid compat_alloc_user_space
kexec: move locking into do_kexec_load
mm: migrate: change to use bool type for 'page_was_mapped'
mm: migrate: fix the incorrect function name in comments
mm: migrate: introduce a local variable to get the number of pages
mm/vmstat: protect per cpu variables with preempt disable on RT
* emailed hotfixes from Andrew Morton <akpm@linux-foundation.org>:
nds32/setup: remove unused memblock_region variable in setup_memory()
mm/mempolicy: fix a race between offset_il_node and mpol_rebind_task
mm/kmemleak: allow __GFP_NOLOCKDEP passed to kmemleak's gfp
mmap_lock: change trace and locking order
mm/page_alloc.c: avoid accessing uninitialized pcp page migratetype
mm,vmscan: fix divide by zero in get_scan_count
mm/hugetlb: initialize hugetlb_usage in mm_init
mm/hmm: bypass devmap pte when all pfn requested flags are fulfilled
|
||
yanghui
|
276aeee1c5 |
mm/mempolicy: fix a race between offset_il_node and mpol_rebind_task
Servers happened below panic:
Kernel version:5.4.56
BUG: unable to handle page fault for address: 0000000000002c48
RIP: 0010:__next_zones_zonelist+0x1d/0x40
Call Trace:
__alloc_pages_nodemask+0x277/0x310
alloc_page_interleave+0x13/0x70
handle_mm_fault+0xf99/0x1390
__do_page_fault+0x288/0x500
do_page_fault+0x30/0x110
page_fault+0x3e/0x50
The reason for the panic is that MAX_NUMNODES is passed in the third
parameter in __alloc_pages_nodemask(preferred_nid). So access to
zonelist->zoneref->zone_idx in __next_zones_zonelist will cause a panic.
In offset_il_node(), first_node() returns nid from pol->v.nodes, after
this other threads may chang pol->v.nodes before next_node(). This race
condition will let next_node return MAX_NUMNODES. So put pol->nodes in
a local variable.
The race condition is between offset_il_node and cpuset_change_task_nodemask:
CPU0: CPU1:
alloc_pages_vma()
interleave_nid(pol,)
offset_il_node(pol,)
first_node(pol->v.nodes) cpuset_change_task_nodemask
//nodes==0xc mpol_rebind_task
mpol_rebind_policy
mpol_rebind_nodemask(pol,nodes)
//nodes==0x3
next_node(nid, pol->v.nodes)//return MAX_NUMNODES
Link: https://lkml.kernel.org/r/20210906034658.48721-1-yanghui.def@bytedance.com
Signed-off-by: yanghui <yanghui.def@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Arnd Bergmann
|
59ab844eed |
compat: remove some compat entry points
These are all handled correctly when calling the native system call entry point, so remove the special cases. Link: https://lkml.kernel.org/r/20210727144859.4150043-6-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Arnd Bergmann
|
e130242dc3 |
mm: simplify compat numa syscalls
The compat implementations for mbind, get_mempolicy, set_mempolicy and migrate_pages are just there to handle the subtly different layout of bitmaps on 32-bit hosts. The compat implementation however lacks some of the checks that are present in the native one, in particular for checking that the extra bits are all zero when user space has a larger mask size than the kernel. Worse, those extra bits do not get cleared when copying in or out of the kernel, which can lead to incorrect data as well. Unify the implementation to handle the compat bitmap layout directly in the get_nodes() and copy_nodes_to_user() helpers. Splitting out the get_bitmap() helper from get_nodes() also helps readability of the native case. On x86, two additional problems are addressed by this: compat tasks can pass a bitmap at the end of a mapping, causing a fault when reading across the page boundary for a 64-bit word. x32 tasks might also run into problems with get_mempolicy corrupting data when an odd number of 32-bit words gets passed. On parisc the migrate_pages() system call apparently had the wrong calling convention, as big-endian architectures expect the words inside of a bitmap to be swapped. This is not a problem though since parisc has no NUMA support. [arnd@arndb.de: fix mempolicy crash] Link: https://lkml.kernel.org/r/20210730143417.3700653-1-arnd@kernel.org Link: https://lore.kernel.org/lkml/YQPLG20V3dmOfq3a@osiris/ Link: https://lkml.kernel.org/r/20210727144859.4150043-5-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vasily Averin
|
38b031dd4d |
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
Obsoleted in_intrrupt() include task context with disabled BH, it's better to use in_task() instead. Link: https://lkml.kernel.org/r/984ee771-4834-21da-801f-c15c18ddf4d1@virtuozzo.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Feng Tang
|
be897d48a9 |
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
As they all do the same thing: sanity check and save nodemask info, create one mpol_new_nodemask() to reduce redundancy. Link: https://lkml.kernel.org/r/1627970362-61305-6-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ben Widawsky <ben.widawsky@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Ben Widawsky
|
a38a59fdfa |
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
Adds a new mode to the existing mempolicy modes, MPOL_PREFERRED_MANY. MPOL_PREFERRED_MANY will be adequately documented in the internal admin-guide with this patch. Eventually, the man pages for mbind(2), get_mempolicy(2), set_mempolicy(2) and numactl(8) will also have text about this mode. Those shall contain the canonical reference. NUMA systems continue to become more prevalent. New technologies like PMEM make finer grain control over memory access patterns increasingly desirable. MPOL_PREFERRED_MANY allows userspace to specify a set of nodes that will be tried first when performing allocations. If those allocations fail, all remaining nodes will be tried. It's a straight forward API which solves many of the presumptive needs of system administrators wanting to optimize workloads on such machines. The mode will work either per VMA, or per thread. [Michal Hocko: refine kernel doc for MPOL_PREFERRED_MANY] Link: https://lore.kernel.org/r/20200630212517.308045-13-ben.widawsky@intel.com Link: https://lkml.kernel.org/r/1627970362-61305-5-git-send-email-feng.tang@intel.com Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Feng Tang
|
4c54d94908 |
mm/memplicy: add page allocation function for MPOL_PREFERRED_MANY policy
The semantics of MPOL_PREFERRED_MANY is similar to MPOL_PREFERRED, that it will first try to allocate memory from the preferred node(s), and fallback to all nodes in system when first try fails. Add a dedicated function alloc_pages_preferred_many() for it just like for 'interleave' policy, which will be used by 2 general memoory allocation APIs: alloc_pages() and alloc_pages_vma() Link: https://lore.kernel.org/r/20200630212517.308045-9-ben.widawsky@intel.com Link: https://lkml.kernel.org/r/1627970362-61305-3-git-send-email-feng.tang@intel.com Suggested-by: Michal Hocko <mhocko@suse.com> Originally-by: Ben Widawsky <ben.widawsky@intel.com> Co-developed-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dave Hansen
|
b27abaccf8 |
mm/mempolicy: add MPOL_PREFERRED_MANY for multiple preferred nodes
Patch series "Introduce multi-preference mempolicy", v7. This patch series introduces the concept of the MPOL_PREFERRED_MANY mempolicy. This mempolicy mode can be used with either the set_mempolicy(2) or mbind(2) interfaces. Like the MPOL_PREFERRED interface, it allows an application to set a preference for nodes which will fulfil memory allocation requests. Unlike the MPOL_PREFERRED mode, it takes a set of nodes. Like the MPOL_BIND interface, it works over a set of nodes. Unlike MPOL_BIND, it will not cause a SIGSEGV or invoke the OOM killer if those preferred nodes are not available. Along with these patches are patches for libnuma, numactl, numademo, and memhog. They still need some polish, but can be found here: https://gitlab.com/bwidawsk/numactl/-/tree/prefer-many It allows new usage: `numactl -P 0,3,4` The goal of the new mode is to enable some use-cases when using tiered memory usage models which I've lovingly named. 1a. The Hare - The interconnect is fast enough to meet bandwidth and latency requirements allowing preference to be given to all nodes with "fast" memory. 1b. The Indiscriminate Hare - An application knows it wants fast memory (or perhaps slow memory), but doesn't care which node it runs on. The application can prefer a set of nodes and then xpu bind to the local node (cpu, accelerator, etc). This reverses the nodes are chosen today where the kernel attempts to use local memory to the CPU whenever possible. This will attempt to use the local accelerator to the memory. 2. The Tortoise - The administrator (or the application itself) is aware it only needs slow memory, and so can prefer that. Much of this is almost achievable with the bind interface, but the bind interface suffers from an inability to fallback to another set of nodes if binding fails to all nodes in the nodemask. Like MPOL_BIND a nodemask is given. Inherently this removes ordering from the preference. > /* Set first two nodes as preferred in an 8 node system. */ > const unsigned long nodes = 0x3 > set_mempolicy(MPOL_PREFER_MANY, &nodes, 8); > /* Mimic interleave policy, but have fallback *. > const unsigned long nodes = 0xaa > set_mempolicy(MPOL_PREFER_MANY, &nodes, 8); Some internal discussion took place around the interface. There are two alternatives which we have discussed, plus one I stuck in: 1. Ordered list of nodes. Currently it's believed that the added complexity is nod needed for expected usecases. 2. A flag for bind to allow falling back to other nodes. This confuses the notion of binding and is less flexible than the current solution. 3. Create flags or new modes that helps with some ordering. This offers both a friendlier API as well as a solution for more customized usage. It's unknown if it's worth the complexity to support this. Here is sample code for how this might work: > // Prefer specific nodes for some something wacky > set_mempolicy(MPOL_PREFER_MANY, 0x17c, 1024); > > // Default > set_mempolicy(MPOL_PREFER_MANY | MPOL_F_PREFER_ORDER_SOCKET, NULL, 0); > // which is the same as > set_mempolicy(MPOL_DEFAULT, NULL, 0); > > // The Hare > set_mempolicy(MPOL_PREFER_MANY | MPOL_F_PREFER_ORDER_TYPE, NULL, 0); > > // The Tortoise > set_mempolicy(MPOL_PREFER_MANY | MPOL_F_PREFER_ORDER_TYPE_REV, NULL, 0); > > // Prefer the fast memory of the first two sockets > set_mempolicy(MPOL_PREFER_MANY | MPOL_F_PREFER_ORDER_TYPE, -1, 2); > This patch (of 5): The NUMA APIs currently allow passing in a "preferred node" as a single bit set in a nodemask. If more than one bit it set, bits after the first are ignored. This single node is generally OK for location-based NUMA where memory being allocated will eventually be operated on by a single CPU. However, in systems with multiple memory types, folks want to target a *type* of memory instead of a location. For instance, someone might want some high-bandwidth memory but do not care about the CPU next to which it is allocated. Or, they want a cheap, high capacity allocation and want to target all NUMA nodes which have persistent memory in volatile mode. In both of these cases, the application wants to target a *set* of nodes, but does not want strict MPOL_BIND behavior as that could lead to OOM killer or SIGSEGV. So add MPOL_PREFERRED_MANY policy to support the multiple preferred nodes requirement. This is not a pie-in-the-sky dream for an API. This was a response to a specific ask of more than one group at Intel. Specifically: 1. There are existing libraries that target memory types such as https://github.com/memkind/memkind. These are known to suffer from SIGSEGV's when memory is low on targeted memory "kinds" that span more than one node. The MCDRAM on a Xeon Phi in "Cluster on Die" mode is an example of this. 2. Volatile-use persistent memory users want to have a memory policy which is targeted at either "cheap and slow" (PMEM) or "expensive and fast" (DRAM). However, they do not want to experience allocation failures when the targeted type is unavailable. 3. Allocate-then-run. Generally, we let the process scheduler decide on which physical CPU to run a task. That location provides a default allocation policy, and memory availability is not generally considered when placing tasks. For situations where memory is valuable and constrained, some users want to allocate memory first, *then* allocate close compute resources to the allocation. This is the reverse of the normal (CPU) model. Accelerators such as GPUs that operate on core-mm-managed memory are interested in this model. A check is added in sanitize_mpol_flags() to not permit 'prefer_many' policy to be used for now, and will be removed in later patch after all implementations for 'prefer_many' are ready, as suggested by Michal Hocko. [mhocko@kernel.org: suggest to refine policy_node/policy_nodemask handling] Link: https://lkml.kernel.org/r/1627970362-61305-1-git-send-email-feng.tang@intel.com Link: https://lore.kernel.org/r/20200630212517.308045-4-ben.widawsky@intel.com Link: https://lkml.kernel.org/r/1627970362-61305-2-git-send-email-feng.tang@intel.com Co-developed-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Huang Ying <ying.huang@intel.com>b Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Baolin Wang
|
062db29358 |
mm/mempolicy: use readable NUMA_NO_NODE macro instead of magic number
The caller of mpol_misplaced() already use NUMA_NO_NODE to check whether current page node is misplaced, thus using NUMA_NO_NODE in mpol_misplaced() instead of magic number is more readable. Link: https://lkml.kernel.org/r/1b77c0ce21183fa86f4db250b115cf5e27396528.1627558356.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Huang Ying
|
20b51af15e |
mm/migrate: add sysfs interface to enable reclaim migration
Some method is obviously needed to enable reclaim-based migration. Just like traditional autonuma, there will be some workloads that will benefit like workloads with more "static" configurations where hot pages stay hot and cold pages stay cold. If pages come and go from the hot and cold sets, the benefits of this approach will be more limited. The benefits are truly workload-based and *not* hardware-based. We do not believe that there is a viable threshold where certain hardware configurations should have this mechanism enabled while others do not. To be conservative, earlier work defaulted to disable reclaim- based migration and did not include a mechanism to enable it. This proposes add a new sysfs file /sys/kernel/mm/numa/demotion_enabled as a method to enable it. We are open to any alternative that allows end users to enable this mechanism or disable it if workload harm is detected (just like traditional autonuma). Once this is enabled page demotion may move data to a NUMA node that does not fall into the cpuset of the allocating process. This could be construed to violate the guarantees of cpusets. However, since this is an opt-in mechanism, the assumption is that anyone enabling it is content to relax the guarantees. Link: https://lkml.kernel.org/r/20210721063926.3024591-9-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-10-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Originally-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Yang Shi
|
5ac95884a7 |
mm/migrate: enable returning precise migrate_pages() success count
Under normal circumstances, migrate_pages() returns the number of pages migrated. In error conditions, it returns an error code. When returning an error code, there is no way to know how many pages were migrated or not migrated. Make migrate_pages() return how many pages are demoted successfully for all cases, including when encountering errors. Page reclaim behavior will depend on this in subsequent patches. Link: https://lkml.kernel.org/r/20210721063926.3024591-3-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-4-ying.huang@intel.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Oscar Salvador <osalvador@suse.de> [optional parameter] Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ben Widawsky
|
269fbe72cd |
mm/mempolicy: use unified 'nodes' for bind/interleave/prefer policies
Current structure 'mempolicy' uses a union to store the node info for
bind/interleave/perfer policies.
union {
short preferred_node; /* preferred */
nodemask_t nodes; /* interleave/bind */
/* undefined for default */
} v;
Since preferred node can also be represented by a nodemask_t with only ont
bit set, unify these policies with using one nodemask_t 'nodes', which can
remove a union, simplify the code and make it easier to support future's
new policy's node info.
Link: https://lore.kernel.org/r/20200630212517.308045-7-ben.widawsky@intel.com
Link: https://lkml.kernel.org/r/1623399825-75651-1-git-send-email-feng.tang@intel.com
Co-developed-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Yang Shi
|
e5947d23ed |
mm: mempolicy: don't have to split pmd for huge zero page
When trying to migrate pages to obey mempolicy, the huge zero page is
split by inserting base zero pfn to all PTEs, then the page table walk
fallback to PTE level and just skips zero page. Skipping zero page for
mempolicy has been the behavior of kernel since v2.6.16 due to commit
|
||
|
Feng Tang
|
9583792458 |
mm/mempolicy: unify the parameter sanity check for mbind and set_mempolicy
Currently the kernel_mbind() and kernel_set_mempolicy() do almost the same operation for parameter sanity check. Add a helper function to unify the code to reduce the redundancy, and make it easier for changing the sanity check code in future. [thanks to David Rientjes for suggesting using helper function instead of macro]. [feng.tang@intel.com: add comment] Link: https://lkml.kernel.org/r/1622560492-1294-4-git-send-email-feng.tang@intel.com Link: https://lkml.kernel.org/r/1622469956-82897-4-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ben Widawsky <ben.widawsky@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Feng Tang
|
7858d7bca7 |
mm/mempolicy: don't handle MPOL_LOCAL like a fake MPOL_PREFERRED policy
MPOL_LOCAL policy has been setup as a real policy, but it is still handled like a faked POL_PREFERRED policy with one internal MPOL_F_LOCAL flag bit set, and there are many places having to judge the real 'prefer' or the 'local' policy, which are quite confusing. In current code, there are 4 cases that MPOL_LOCAL are used: 1. user specifies 'local' policy 2. user specifies 'prefer' policy, but with empty nodemask 3. system 'default' policy is used 4. 'prefer' policy + valid 'preferred' node with MPOL_F_STATIC_NODES flag set, and when it is 'rebind' to a nodemask which doesn't contains the 'preferred' node, it will perform as 'local' policy So make 'local' a real policy instead of a fake 'prefer' one, and kill MPOL_F_LOCAL bit, which can greatly reduce the confusion for code reading. For case 4, the logic of mpol_rebind_preferred() is confusing, as Michal Hocko pointed out: : I do believe that rebinding preferred policy is just bogus and it should : be dropped altogether on the ground that a preference is a mere hint from : userspace where to start the allocation. Unless I am missing something : cpusets will be always authoritative for the final placement. The : preferred node just acts as a starting point and it should be really : preserved when cpusets changes. Otherwise we have a very subtle behavior : corner cases. So dump all the tricky transformation between 'prefer' and 'local', and just record the new nodemask of rebinding. [feng.tang@intel.com: fix a problem in mpol_set_nodemask(), per Michal Hocko] Link: https://lkml.kernel.org/r/1622560492-1294-3-git-send-email-feng.tang@intel.com [feng.tang@intel.com: refine code and comments of mpol_set_nodemask(), per Michal] Link: https://lkml.kernel.org/r/20210603081807.GE56979@shbuild999.sh.intel.com Link: https://lkml.kernel.org/r/1622469956-82897-3-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ben Widawsky <ben.widawsky@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Feng Tang
|
b26e517a05 |
mm/mempolicy: cleanup nodemask intersection check for oom
Patch series "mm/mempolicy: some fix and semantics cleanup", v4. Current memory policy code has some confusing and ambiguous part about MPOL_LOCAL policy, as it is handled as a faked MPOL_PREFERRED one, and there are many places having to distinguish them. Also the nodemask intersection check needs cleanup to be more explicit for OOM use, and handle MPOL_INTERLEAVE correctly. This patchset cleans up these and unifies the parameter sanity check for mbind() and set_mempolicy(). This patch (of 3): mempolicy_nodemask_intersects seem to be a general purpose mempolicy function. In fact it is partially tailored for the OOM purpose instead. The oom proper is the only existing user so rename the function to make that purpose explicit. While at it drop the MPOL_INTERLEAVE as those allocations never has a nodemask defined (see alloc_page_interleave) so this is a dead code and a confusing one because MPOL_INTERLEAVE is a hint rather than a hard requirement so it shouldn't be considered during the OOM. The final code can be reduced to a check for MPOL_BIND which is the only memory policy that is a hard requirement and thus relevant to a constrained OOM logic. [mhocko@suse.com: changelog edits] Link: https://lkml.kernel.org/r/1622560492-1294-1-git-send-email-feng.tang@intel.com Link: https://lkml.kernel.org/r/1622560492-1294-2-git-send-email-feng.tang@intel.com Link: https://lkml.kernel.org/r/1622469956-82897-1-git-send-email-feng.tang@intel.com Link: https://lkml.kernel.org/r/1622469956-82897-2-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ben Widawsky <ben.widawsky@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mel Gorman
|
f19298b951 |
mm/vmstat: convert NUMA statistics to basic NUMA counters
NUMA statistics are maintained on the zone level for hits, misses, foreign etc but nothing relies on them being perfectly accurate for functional correctness. The counters are used by userspace to get a general overview of a workloads NUMA behaviour but the page allocator incurs a high cost to maintain perfect accuracy similar to what is required for a vmstat like NR_FREE_PAGES. There even is a sysctl vm.numa_stat to allow userspace to turn off the collection of NUMA statistics like NUMA_HIT. This patch converts NUMA_HIT and friends to be NUMA events with similar accuracy to VM events. There is a possibility that slight errors will be introduced but the overall trend as seen by userspace will be similar. The counters are no longer updated from vmstat_refresh context as it is unnecessary overhead for counters that may never be read by userspace. Note that counters could be maintained at the node level to save space but it would have a user-visible impact due to /proc/zoneinfo. [lkp@intel.com: Fix misplaced closing brace for !CONFIG_NUMA] Link: https://lkml.kernel.org/r/20210512095458.30632-4-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Liam Howlett
|
33e3575c51 |
mm/mempolicy: use vma_lookup() in __access_remote_vm()
vma_lookup() finds the vma of a specific address with a cleaner interface and is more readable. Link: https://lkml.kernel.org/r/20210521174745.2219620-23-Liam.Howlett@Oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Lu Jialin
|
baf2f90ba4 |
mm: fix typos in comments
succed -> succeed in mm/hugetlb.c wil -> will in mm/mempolicy.c wit -> with in mm/page_alloc.c Retruns -> Returns in mm/page_vma_mapped.c confict -> conflict in mm/secretmem.c No functionality changed. Link: https://lkml.kernel.org/r/20210408140027.60623-1-lujialin4@huawei.com Signed-off-by: Lu Jialin <lujialin4@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Ingo Molnar
|
f0953a1bba |
mm: fix typos in comments
Fix ~94 single-word typos in locking code comments, plus a few very obvious grammar mistakes. Link: https://lkml.kernel.org/r/20210322212624.GA1963421@gmail.com Link: https://lore.kernel.org/r/20210322205203.GB1959563@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Zhiyuan Dai
|
68d68ff6eb |
mm/mempool: minor coding style tweaks
Various coding style tweaks to various files under mm/ [daizhiyuan@phytium.com.cn: mm/swapfile: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614223624-16055-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/sparse: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614227288-19363-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/vmscan: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614227649-19853-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/compaction: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228218-20770-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/oom_kill: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228360-21168-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/shmem: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228504-21491-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/page_alloc: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228613-21754-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/filemap: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228936-22337-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/mlock: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613956588-2453-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/frontswap: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613962668-15045-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/vmalloc: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613963379-15988-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/memory_hotplug: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613971784-24878-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/mempolicy: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613972228-25501-1-git-send-email-daizhiyuan@phytium.com.cn Link: https://lkml.kernel.org/r/1614222374-13805-1-git-send-email-daizhiyuan@phytium.com.cn Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Minchan Kim
|
361a2a229f |
mm: replace migrate_[prep|finish] with lru_cache_[disable|enable]
Currently, migrate_[prep|finish] is merely a wrapper of lru_cache_[disable|enable]. There is not much to gain from having additional abstraction. Use lru_cache_[disable|enable] instead of migrate_[prep|finish], which would be more descriptive. note: migrate_prep_local in compaction.c changed into lru_add_drain to avoid CPU schedule cost with involving many other CPUs to keep old behavior. Link: https://lkml.kernel.org/r/20210319175127.886124-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: John Dias <joaodias@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oliver Sang <oliver.sang@intel.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Minchan Kim
|
d479960e44 |
mm: disable LRU pagevec during the migration temporarily
LRU pagevec holds refcount of pages until the pagevec are drained. It
could prevent migration since the refcount of the page is greater than
the expection in migration logic. To mitigate the issue, callers of
migrate_pages drains LRU pagevec via migrate_prep or lru_add_drain_all
before migrate_pages call.
However, it's not enough because pages coming into pagevec after the
draining call still could stay at the pagevec so it could keep
preventing page migration. Since some callers of migrate_pages have
retrial logic with LRU draining, the page would migrate at next trail
but it is still fragile in that it doesn't close the fundamental race
between upcoming LRU pages into pagvec and migration so the migration
failure could cause contiguous memory allocation failure in the end.
To close the race, this patch disables lru caches(i.e, pagevec) during
ongoing migration until migrate is done.
Since it's really hard to reproduce, I measured how many times
migrate_pages retried with force mode(it is about a fallback to a sync
migration) with below debug code.
int migrate_pages(struct list_head *from, new_page_t get_new_page,
..
..
if (rc && reason == MR_CONTIG_RANGE && pass > 2) {
printk(KERN_ERR, "pfn 0x%lx reason %d", page_to_pfn(page), rc);
dump_page(page, "fail to migrate");
}
The test was repeating android apps launching with cma allocation in
background every five seconds. Total cma allocation count was about 500
during the testing. With this patch, the dump_page count was reduced
from 400 to 30.
The new interface is also useful for memory hotplug which currently
drains lru pcp caches after each migration failure. This is rather
suboptimal as it has to disrupt others running during the operation.
With the new interface the operation happens only once. This is also in
line with pcp allocator cache which are disabled for the offlining as
well.
Link: https://lkml.kernel.org/r/20210319175127.886124-1-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Chris Goldsworthy <cgoldswo@codeaurora.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: John Dias <joaodias@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Oliver Sang <oliver.sang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Matthew Wilcox (Oracle)
|
5f076944f0 |
mm/mempolicy: fix mpol_misplaced kernel-doc
Sphinx interprets the Return section as a list and complains about it. Turn it into a sentence and move it to the end of the kernel-doc to fit the kernel-doc style. Link: https://lkml.kernel.org/r/20210225150642.2582252-8-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
eb35073960 |
mm/mempolicy: rewrite alloc_pages_vma documentation
The current formatting doesn't quite work with kernel-doc. Link: https://lkml.kernel.org/r/20210225150642.2582252-7-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
6421ec764a |
mm/mempolicy: rewrite alloc_pages documentation
Document alloc_pages() for both NUMA and non-NUMA cases as kernel-doc doesn't care. Link: https://lkml.kernel.org/r/20210225150642.2582252-6-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
d7f946d0fa |
mm/mempolicy: rename alloc_pages_current to alloc_pages
When CONFIG_NUMA is enabled, alloc_pages() is a wrapper around alloc_pages_current(). This is pointless, just implement alloc_pages() directly. Link: https://lkml.kernel.org/r/20210225150642.2582252-5-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
84172f4bb7 |
mm/page_alloc: combine __alloc_pages and __alloc_pages_nodemask
There are only two callers of __alloc_pages() so prune the thicket of alloc_page variants by combining the two functions together. Current callers of __alloc_pages() simply add an extra 'NULL' parameter and current callers of __alloc_pages_nodemask() call __alloc_pages() instead. Link: https://lkml.kernel.org/r/20210225150642.2582252-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Miaohe Lin
|
ce33135cde |
mm/mempolicy: use helper range_in_vma() in queue_pages_test_walk()
The helper range_in_vma() is introduced via commit
|
||
|
Huang Ying
|
bda420b985 |
numa balancing: migrate on fault among multiple bound nodes
Now, NUMA balancing can only optimize the page placement among the NUMA
nodes if the default memory policy is used. Because the memory policy
specified explicitly should take precedence. But this seems too strict in
some situations. For example, on a system with 4 NUMA nodes, if the
memory of an application is bound to the node 0 and 1, NUMA balancing can
potentially migrate the pages between the node 0 and 1 to reduce
cross-node accessing without breaking the explicit memory binding policy.
So in this patch, we add MPOL_F_NUMA_BALANCING mode flag to
set_mempolicy() when mode is MPOL_BIND. With the flag specified, NUMA
balancing will be enabled within the thread to optimize the page placement
within the constrains of the specified memory binding policy. With the
newly added flag, the NUMA balancing control mechanism becomes,
- sysctl knob numa_balancing can enable/disable the NUMA balancing
globally.
- even if sysctl numa_balancing is enabled, the NUMA balancing will be
disabled for the memory areas or applications with the explicit
memory policy by default.
- MPOL_F_NUMA_BALANCING can be used to enable the NUMA balancing for
the applications when specifying the explicit memory policy
(MPOL_BIND).
Various page placement optimization based on the NUMA balancing can be
done with these flags. As the first step, in this patch, if the memory of
the application is bound to multiple nodes (MPOL_BIND), and in the hint
page fault handler the accessing node are in the policy nodemask, the page
will be tried to be migrated to the accessing node to reduce the
cross-node accessing.
If the newly added MPOL_F_NUMA_BALANCING flag is specified by an
application on an old kernel version without its support, set_mempolicy()
will return -1 and errno will be set to EINVAL. The application can use
this behavior to run on both old and new kernel versions.
And if the MPOL_F_NUMA_BALANCING flag is specified for the mode other than
MPOL_BIND, set_mempolicy() will return -1 and errno will be set to EINVAL
as before. Because we don't support optimization based on the NUMA
balancing for these modes.
In the previous version of the patch, we tried to reuse MPOL_MF_LAZY for
mbind(). But that flag is tied to MPOL_MF_MOVE.*, so it seems not a good
API/ABI for the purpose of the patch.
And because it's not clear whether it's necessary to enable NUMA balancing
for a specific memory area inside an application, so we only add the flag
at the thread level (set_mempolicy()) instead of the memory area level
(mbind()). We can do that when it become necessary.
To test the patch, we run a test case as follows on a 4-node machine with
192 GB memory (48 GB per node).
1. Change pmbench memory accessing benchmark to call set_mempolicy()
to bind its memory to node 1 and 3 and enable NUMA balancing. Some
related code snippets are as follows,
#include <numaif.h>
#include <numa.h>
struct bitmask *bmp;
int ret;
bmp = numa_parse_nodestring("1,3");
ret = set_mempolicy(MPOL_BIND | MPOL_F_NUMA_BALANCING,
bmp->maskp, bmp->size + 1);
/* If MPOL_F_NUMA_BALANCING isn't supported, fall back to MPOL_BIND */
if (ret < 0 && errno == EINVAL)
ret = set_mempolicy(MPOL_BIND, bmp->maskp, bmp->size + 1);
if (ret < 0) {
perror("Failed to call set_mempolicy");
exit(-1);
}
2. Run a memory eater on node 3 to use 40 GB memory before running pmbench.
3. Run pmbench with 64 processes, the working-set size of each process
is 640 MB, so the total working-set size is 64 * 640 MB = 40 GB. The
CPU and the memory (as in step 1.) of all pmbench processes is bound
to node 1 and 3. So, after CPU usage is balanced, some pmbench
processes run on the CPUs of the node 3 will access the memory of
the node 1.
4. After the pmbench processes run for 100 seconds, kill the memory
eater. Now it's possible for some pmbench processes to migrate
their pages from node 1 to node 3 to reduce cross-node accessing.
Test results show that, with the patch, the pages can be migrated from
node 1 to node 3 after killing the memory eater, and the pmbench score
can increase about 17.5%.
Link: https://lkml.kernel.org/r/20210120061235.148637-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Jan Stancek
|
f555befd18 |
mm: migrate: initialize err in do_migrate_pages
After commit |
||
|
Yang Shi
|
236c32eb10 |
mm: migrate: clean up migrate_prep{_local}
The migrate_prep{_local} never fails, so it is pointless to have return
value and check the return value.
Link: https://lkml.kernel.org/r/20201113205359.556831-5-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Shijie Luo
|
3f08842098 |
mm: mempolicy: fix potential pte_unmap_unlock pte error
When flags in queue_pages_pte_range don't have MPOL_MF_MOVE or MPOL_MF_MOVE_ALL bits, code breaks and passing origin pte - 1 to pte_unmap_unlock seems like not a good idea. queue_pages_pte_range can run in MPOL_MF_MOVE_ALL mode which doesn't migrate misplaced pages but returns with EIO when encountering such a page. Since commit |
||
Wei Yang
|
f8fd52535c |
mm: remove unused alloc_page_vma_node()
No one use this macro anymore. Also fix code style of policy_node(). Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20200921021401.84508-1-richard.weiyang@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wei Yang
|
78b132e9ba |
mm/mempolicy: remove or narrow the lock on current
It is not necessary to hold the lock of current when setting nodemask of a new policy. Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20200921040416.86185-1-richard.weiyang@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |