Commit Graph

633569 Commits

Author SHA1 Message Date
James Hogan
d852b5f35e KVM: MIPS: Add missing uaccess.h include
MIPS KVM uses user memory accessors but mips.c doesn't directly include
uaccess.h, so include it now.

This wasn't too much of a problem before v4.9-rc1 as asm/module.h
included asm/uaccess.h, however since commit 29abfbd9cb ("mips:
separate extable.h, switch module.h to it") this is no longer the case.

This resulted in build failures when trace points were disabled, as
trace/define_trace.h includes trace/trace_events.h only ifdef
TRACEPOINTS_ENABLED, which goes on to include asm/uaccess.h via a couple
of other headers.

Fixes: 29abfbd9cb ("mips: separate extable.h, switch module.h to it")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
2016-10-19 00:37:05 +01:00
Rich Felker
99f453f875 sh: add earlycon support to j2_defconfig
Signed-off-by: Rich Felker <dalias@libc.org>
2016-10-18 18:54:56 -04:00
Rich Felker
db766b0a25 sh: add Kconfig option for J-Core SoC core drivers
Signed-off-by: Rich Felker <dalias@libc.org>
2016-10-18 18:53:37 -04:00
Linus Torvalds
1a1891d762 This includes fixing a bug which references a wrong pointer, sum_page, in
f2fs_gc. It was newly introduced in 4.9-rc1.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYBoL+AAoJEEAUqH6CSFDSQEoP/irufW4HDUszwKCxISLGksBN
 /i85zfbL9pY11Ci78qW4N5pegd2ouKk9WtUdrtXwT6y8Y+CWs9Gx5FaYbdA8aj7T
 nQBfRlfN/zKIJkRqqqXh/YRTMyQfUticur0dWZ00l7wpGAxA6Xhe+QDV1T7rxQxZ
 W8Ne9jcAD+SLu8G5Ci8zOTDcK+q6SWeXFNFtM1MPqr/S86PXiTRmlWFNcubACBi9
 iqLl5moD++oYBJSU6sqxaKXvf27GhJMZUGp+upYT9lEIGF98vyhw+yXT64HYDvrW
 lMJspz80m5CRT3Pz7nxG+1d6ctONbXwDjyBPeEINUlHi4DN07UJZCJUnUWyMYM8D
 JffKq4DGhmsh0CJoX5pKjzxDhuHtrWwN+d/gMuUZrgC7oecXs0U5O2WR49oMGCs8
 MMh6T/MUh1fWBI7F1Y3+OvyshU5XA9LCcNguu0T/RSKsjvqxkYTlpS/Zo1U/mpqv
 ar34mlvLXlLQNj8gTYDNybq/ufBfS2Fzq+juWbXCaVZ4OV0rsu66D9aUInQ66Iy6
 1EqjlLaqAwTF+DJsyGeAxNEn6tMPiqMVhK9LTT9dz5Uk5vK4FdvuDxqeFuwwTnCi
 xYHdsZn/yhs7Nn6akwOclJayegDKiV3OVEG4ZyUHrXVR+njFTJyW20VcuUvN9RCn
 AxHW5MI9jaU/U+O4Opbb
 =1MpQ
 -----END PGP SIGNATURE-----

Merge tag 'for-f2fs-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs bugfix from Jaegeuk Kim:
 "This fixes a bug which referenced the wrong pointer, sum_page, in
  f2fs_gc.  It was newly introduced in 4.9-rc1.

* tag 'for-f2fs-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: fix wrong sum_page pointer in f2fs_gc
2016-10-18 14:15:23 -07:00
Lorenzo Stoakes
c164154f66 mm: replace get_user_pages_unlocked() write/force parameters with gup_flags
This removes the 'write' and 'force' use from get_user_pages_unlocked()
and replaces them with 'gup_flags' to make the use of FOLL_FORCE
explicit in callers as use of this flag can result in surprising
behaviour (and hence bugs) within the mm subsystem.

Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-18 14:13:37 -07:00
Lorenzo Stoakes
d4944b0ece mm: remove write/force parameters from __get_user_pages_unlocked()
This removes the redundant 'write' and 'force' parameters from
__get_user_pages_unlocked() to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.

Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-18 14:13:37 -07:00
Lorenzo Stoakes
859110d749 mm: remove write/force parameters from __get_user_pages_locked()
This removes the redundant 'write' and 'force' parameters from
__get_user_pages_locked() to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.

Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-18 14:13:36 -07:00
Linus Torvalds
19be0eaffa mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
This is an ancient bug that was actually attempted to be fixed once
(badly) by me eleven years ago in commit 4ceb5db975 ("Fix
get_user_pages() race for write access") but that was then undone due to
problems on s390 by commit f33ea7f404 ("fix get_user_pages bug").

In the meantime, the s390 situation has long been fixed, and we can now
fix it by checking the pte_dirty() bit properly (and do it better).  The
s390 dirty bit was implemented in abf09bed3c ("s390/mm: implement
software dirty bits") which made it into v3.9.  Earlier kernels will
have to look at the page state itself.

Also, the VM has become more scalable, and what used a purely
theoretical race back then has become easier to trigger.

To fix it, we introduce a new internal FOLL_COW flag to mark the "yes,
we already did a COW" rather than play racy games with FOLL_WRITE that
is very fundamental, and then use the pte dirty flag to validate that
the FOLL_COW flag is still valid.

Reported-and-tested-by: Phil "not Paul" Oester <kernel@linuxace.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-18 14:13:29 -07:00
Linus Torvalds
0832881425 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
 "Misc fixes, plus hw-enablement changes:

   - fix persistent RAM handling
   - remove pkeys warning
   - remove duplicate macro
   - fix debug warning in irq handler
   - add new 'Knights Mill' CPU related constants and enable the perf bits"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Add Knights Mill CPUID
  perf/x86/intel/rapl: Add Knights Mill CPUID
  perf/x86/intel: Add Knights Mill CPUID
  x86/cpu/intel: Add Knights Mill to Intel family
  x86/e820: Don't merge consecutive E820_PRAM ranges
  pkeys: Remove easily triggered WARN
  x86: Remove duplicate rtit status MSR macro
  x86/smp: Add irq_enter/exit() in smp_reschedule_interrupt()
2016-10-18 09:59:04 -07:00
Linus Torvalds
9d71bdfbcb Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixlet from Ingo Molnar:
 "Remove an unused variable"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Remove unused but set variable
2016-10-18 09:57:12 -07:00
Linus Torvalds
2c11fc87ca Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
 "Fix a crash that can trigger when racing with CPU hotplug: we didn't
  use sched-domains data structures carefully enough in select_idle_cpu()"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix sched domains NULL dereference in select_idle_sibling()
2016-10-18 09:53:59 -07:00
Linus Torvalds
b75d3886f3 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Four tooling fixes, two kprobes KASAN related fixes and an x86 PMU
  driver fix/cleanup"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf jit: Fix build issue on Ubuntu
  perf jevents: Handle events including .c and .o
  perf/x86/intel: Remove an inconsistent NULL check
  kprobes: Unpoison stack in jprobe_return() for KASAN
  kprobes: Avoid false KASAN reports during stack copy
  perf header: Set nr_numa_nodes only when we parsed all the data
  perf top: Fix refreshing hierarchy entries on TUI
2016-10-18 09:30:18 -07:00
Linus Torvalds
e0ed1c22d4 Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
 "Two fixes:

   - a file locks fix (missing critical section, bug introduced in this
     merge window)

   - an x86 down_write() stack frame annotation"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking, fs/locks: Add missing file_sem locks
  locking/rwsem/x86: Add stack frame dependency for ____down_write()
2016-10-18 09:04:17 -07:00
Linus Torvalds
50276c9abb Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
 "Three irqchip driver fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gicv3: Handle loop timeout proper
  irqchip/jcore: Fix lost per-cpu interrupts
  irqchip/eznps: Acknowledge NPS_IPI before calling the handler
2016-10-18 09:01:22 -07:00
Linus Torvalds
351267d941 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc fixes from Ingo Molnar:
 "A CPU hotplug debuggability fix and three objtool false positive
  warnings fixes for new GCC6 code generation patterns"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Use distinct name for cpu_hotplug.dep_map
  objtool: Skip all "unreachable instruction" warnings for gcov kernels
  objtool: Improve rare switch jump table pattern detection
  objtool: Support '-mtune=atom' stack frame setup instruction
2016-10-18 08:35:07 -07:00
Linus Torvalds
5aa43efe90 IEEE 1394 subsystem patch:
- catch an initialization error in the packet sniffer nosy
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYBScGAAoJEHnzb7JUXXnQiPsP/2NdZuTI2Ot+eATNJsKoIqlQ
 v95edanCzJim250Qvgy8dtYjizB7XuPoilx/soc9gReomJA7TyGEAxN4CgWBloAf
 6W1C0rAlvCGkGGGVrjv9TfCpTkXEkoLHuiW/V1crkEpx1p3qomafN8zqZH4kz6hA
 pSJHjea0/U8YuhHlORELyIN2BgWXxhVPr7U6c87l7bC91DLoZXdzJ2nFjRpFIped
 HjjjL/rVMtqx7EGkZ0D+qZYz0OJX9aMO1t/zCXU/1CT4UnaNPPQmCRsDfyEA3YZh
 PSnQpT6z2/kIttXQkmvnAFSTtaaFQoou/Jva4mRph5EzC9O9T/uMFF+0yUoqXeN1
 u2qyMrO6e4gqrlFaaaTvh5v2KsjWtpPw7Tv38rT3IwOia37TpHdm+E6NGmxDKcSc
 3EmaAvyfPUdpI9q4FJWDOIyyBaNSZpVBsQH1+XlaiI137jiQNBYIg9gzy50zaQPf
 WYTZ8ocjDLGF9mN6mibdLE3vdmi6n1mgNUzhDDa8KLQfiLjC30AshuRT8IVUD496
 g5HcuJfR2IXj6leET+Wxp80rfSnYPDEPGYtjLzxF0k5w5DZj/znaMTaTtTxfeMC0
 SgB9nvejRoQxME6cj+5uZB85X1w6pDjoOwqvf0VWPtv4jG4ZmfuRCZ54JpROEZeA
 SMtqX/NvjkcHW5OkbfU2
 =YbZK
 -----END PGP SIGNATURE-----

Merge tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixlet from Stefan Richter:
 "IEEE 1394 subsystem patch: catch an initialization error in the packet
  sniffer nosy"

* tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: nosy: do not ignore errors in ioremap_nocache()
2016-10-18 08:28:08 -07:00
Ard Biesheuvel
6026ed2fe2 MAINTAINERS: Add myself as EFI maintainer
At the request of Matt, I am taking up co-maintainership of the EFI
subsystem. So add my name to the EFI section in MAINTAINERS, and
change the SCM tree reference to point to the new shared Git repo.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20161018143318.15673-2-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-18 17:11:14 +02:00
Linus Torvalds
37c1e28931 drm: amdgpu/radeon and one core regression fix
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYBG8+AAoJEAx081l5xIa+xvIP/1crQ/9k2JJJypYmCgRzWwEp
 PHXF7+z7spLraGGcQgcMj3XZxZbRk9kvzOxrtGdPFW6YVH7j+y3A5BFXx2S5WePW
 Mtqw00dCJ/5jW2zlf9UX0TL3DDFPsFzS+MG13ZjSeljuJsBRgrA61G4iH3PRSkqp
 NFEEQzh34L8ShsFA/WP1YnFv0DooUEbnYh6WyKLLACJQbN1PVcGjTN5ZoEpSViyc
 XBK4mSOeOkPJlP4xzTGB9nyYCWpacPINSVASdWRvHPZaAO+X4tlMSQ/lHrXE41nY
 +UliTMY5RSDP6Gyh94hmzkMO8Y7SNg3npE/ckk3vJnP8PvM829ossES6tMUcT/tw
 3SqN5kL6u5TAnGL96rdsRODGwkSOOaPLPbO85FIhmpicaYFUGaIFD3uK2vfOH+yR
 YGi8Bh3/7SLnMV4ig5c+9V8QFG/hkBK8m1NrB3Z2YJUjeWWgngZapXeYIHi00U90
 BqL4e8ZtL+ko5DrxVdFVshCFlvkM28UEOwtp3Sq1L21OW0pk8QESxLye9yBMgb65
 m4lGFb+4pXr+PuiH4k1yENIwNsqQc7l6FWv05H4AaqgIbDQtM41JFvmRMG8OAabP
 aMRkz87ucZoMM6LrLv4+RvdiZnWoTwmNGQWysgpquECUley/Yt8DDaIrlQWaNAYF
 UwA0Naq6rjLaNcLkwIgG
 =sGp1
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-for-v4.9-rc2' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Just had a couple of amdgpu fixes and one core fix I wanted to get out
  early to fix some regressions.

  I'm sure I'll have more stuff this week for -rc2"

* tag 'drm-fixes-for-v4.9-rc2' of git://people.freedesktop.org/~airlied/linux: (22 commits)
  drm: Print device information again in debugfs
  drm/amd/powerplay: fix bug stop dpm can't work on Vi.
  drm/amd/powerplay: notify smu no display by default.
  drm/amdgpu/dpm: implement thermal sensor for CZ/ST
  drm/amdgpu/powerplay: implement thermal sensor for CZ/ST
  drm/amdgpu: disable smu hw first on tear down
  drm/amdgpu: fix amdgpu_need_full_reset (v2)
  drm/amdgpu/si_dpm: Limit clocks on HD86xx part
  drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
  drm/amdgpu: potential NULL dereference in debugfs code
  drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
  drm/amd/powerplay: fix static checker warnings in iceland_smc.c
  drm/radeon: change vblank_time's calculation method to reduce computational error.
  drm/amdgpu: change vblank_time's calculation method to reduce computational error.
  drm/amdgpu: clarify UVD/VCE special handling for CG
  drm/amd/amdgpu: enable clockgating only after late init
  drm/radeon: allow TA_CS_BC_BASE_ADDR on SI
  drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init
  drm/amdgpu/gfx8: fix CGCG_CGLS handling
  drm/radeon: fix modeset tear down code
  ...
2016-10-18 08:05:29 -07:00
Mika Westerberg
c538b94367 pinctrl: intel: Only restore pins that are used by the driver
Dell XPS 13 (and maybe some others) uses a GPIO (CPU_GP_1) during suspend
to explicitly disable USB touchscreen interrupt. This is done to prevent
situation where the lid is closed the touchscreen is left functional.

The pinctrl driver (wrongly) assumes it owns all pins which are owned by
host and not locked down. It is perfectly fine for BIOS to use those pins
as it is also considered as host in this context.

What happens is that when the lid of Dell XPS 13 is closed, the BIOS
configures CPU_GP_1 low disabling the touchscreen interrupt. During resume
we restore all host owned pins to the known state which includes CPU_GP_1
and this overwrites what the BIOS has programmed there causing the
touchscreen to fail as no interrupts are reaching the CPU anymore.

Fix this by restoring only those pins we know are explicitly requested by
the kernel one way or other.

Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=176361
Reported-by: AceLan Kao <acelan.kao@canonical.com>
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18 14:38:16 +02:00
Ville Syrjälä
a171bc51fa pinctrl: baytrail: Fix lockdep
Initialize the spinlock before using it.

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.8.0-dwc-bisect #4
Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.1403240443 FFD8_X64_R_2014_13_1_00 03/24/2014
 0000000000000000 ffff8800788ff770 ffffffff8133d597 0000000000000000
 0000000000000000 ffff8800788ff7e0 ffffffff810cfb9e 0000000000000002
 ffff8800788ff7d0 ffffffff8205b600 0000000000000002 ffff8800788ff7f0
Call Trace:
 [<ffffffff8133d597>] dump_stack+0x67/0x90
 [<ffffffff810cfb9e>] register_lock_class+0x52e/0x540
 [<ffffffff810d2081>] __lock_acquire+0x81/0x16b0
 [<ffffffff810cede1>] ? save_trace+0x41/0xd0
 [<ffffffff810d33b2>] ? __lock_acquire+0x13b2/0x16b0
 [<ffffffff810cf05a>] ? __lock_is_held+0x4a/0x70
 [<ffffffff810d3b1a>] lock_acquire+0xba/0x220
 [<ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80
 [<ffffffff81631567>] _raw_spin_lock_irqsave+0x47/0x60
 [<ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80
 [<ffffffff8136f1fe>] byt_gpio_get_direction+0x3e/0x80
 [<ffffffff813740a9>] gpiochip_add_data+0x319/0x7d0
 [<ffffffff81631723>] ? _raw_spin_unlock_irqrestore+0x43/0x70
 [<ffffffff8136fe3b>] byt_pinctrl_probe+0x2fb/0x620
 [<ffffffff8142fb0c>] platform_drv_probe+0x3c/0xa0
...

Based on the diff it looks like the problem was introduced in
commit 71e6ca61e8 ("pinctrl: baytrail: Register pin control handling")
but I wasn't able to verify that empirically as the parent commit
just oopsed when I tried to boot it.

Cc: Cristina Ciocan <cristina.ciocan@intel.com>
Cc: stable@vger.kernel.org
Fixes: 71e6ca61e8 ("pinctrl: baytrail: Register pin control handling")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18 14:36:13 +02:00
Andrew Jeffery
8eb37aff76 pinctrl: aspeed-g5: Fix pin association of SPI1 function
The SPI1 function was associated with the wrong pins: The functions that
those pins provide is either an SPI debug or passthrough function
coupled to SPI1. Make the SPI1 mux function configure the relevant pins
and associate new SPI1DEBUG and SPI1PASSTHRU functions with the pins
that were already defined.

The notation used in the datasheet's multi-function pin table for the SoC is
often creative: in this case the SYS* signals are enabled by a single bit,
which is nothing unusual on its own, but in this case the bit was also
participating in a multi-bit bitfield and therefore represented multiple
functions. This fact was overlooked in the original patch.

Fixes: 56e57cb6c0 (pinctrl: Add pinctrl-aspeed-g5 driver)
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18 14:36:12 +02:00
Andrew Jeffery
d3dbabe984 pinctrl: aspeed-g5: Fix GPIOE1 typo
This prevented C20 from successfully being muxed as GPIO.

Fixes: 56e57cb6c0 (pinctrl: Add pinctrl-aspeed-g5 driver)
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18 14:36:11 +02:00
Andrew Jeffery
97e8c3f5e7 pinctrl: aspeed-g5: Fix names of GPID2 pins
Fixes simple typos in the initial commit. There is no behavioural
change.

Fixes: 56e57cb6c0 (pinctrl: Add pinctrl-aspeed-g5 driver)
Reported-by: Xo Wang <xow@google.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18 14:36:11 +02:00
Andrew Jeffery
5366f1460c pinctrl: aspeed: "Not enabled" is a significant mux state
Consider a scenario with one pin P that has two signals A and B, where A
is defined to be higher priority than B: That is, if the mux IP is in a
state that would consider both A and B to be active on P, then A will be
the active signal.

To instead configure B as the active signal we must configure the mux so
that A is inactive. The mux state for signals can be described by
logical operations on one or more bits from one or more registers (a
"signal expression"), which in some cases leads to aliased mux states for
a particular signal. Further, signals described by multi-bit bitfields
often do not only need to record the states that would make them active
(the "enable" expressions), but also the states that makes them inactive
(the "disable" expressions). All of this combined leads to four possible
states for a signal:

         1. A signal is active with respect to an "enable" expression
         2. A signal is not active with respect to an "enable" expression
         3. A signal is inactive with respect to a "disable" expression
         4. A signal is not inactive with respect to a "disable" expression

In the case of P, if we are looking to activate B without explicitly
having configured A it's enough to consider A inactive if all of A's
"enable" signal expressions evaluate to "not active". If any evaluate to
"active" then the corresponding "disable" states must be applied so it
becomes inactive.

For example, on the AST2400 the pins composing GPIO bank H provide
signals ROMD8 through ROMD15 (high priority) and those for UART6 (low
priority). The mux states for ROMD8 through ROMD15 are aliased, i.e.
there are two mux states that result in the respective signals being
configured:

         A. SCU90[6]=1
         B. Strap[4,1:0]=100

Further, the second mux state is a 3-bit bitfield that explicitly
defines the enabled state but the disabled state is implicit, i.e. if
Strap[4,1:0] is not exactly "100" then ROMD8 through ROMD15 are not
considered active. This requires the mux function evaluation logic to
use approach 2. above, however the existing code was using approach 3.
The problem was brought to light on the Palmetto machines where the
strap register value is 0x120ce416, and prevented GPIO requests in bank
H from succeeding despite the hardware being in a position to allow
them.

Fixes: 318398c09a8d ("pinctrl: Add core pinctrl support for Aspeed SoCs")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18 14:36:10 +02:00
Wei Yongjun
5130ccea7c ceph: fix non static symbol warning
Fixes the following sparse warning:

fs/ceph/xattr.c:19:28: warning:
 symbol 'ceph_other_xattr_handler' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-10-18 12:30:32 +02:00
Peter Zijlstra
5f43086bb9 locking, fs/locks: Add missing file_sem locks
I overlooked a few code-paths that can lead to
locks_delete_global_locks().

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Bruce Fields <bfields@fieldses.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: syzkaller <syzkaller@googlegroups.com>
Link: http://lkml.kernel.org/r/20161008081228.GF3142@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-18 12:21:28 +02:00
Josh Poimboeuf
55a76b59b5 locking/rwsem/x86: Add stack frame dependency for ____down_write()
Arnd reported the following objtool warning:

  kernel/locking/rwsem.o: warning: objtool: down_write_killable()+0x16: call without frame pointer save/setup

The warning means gcc placed the ____down_write() inline asm (and its
call instruction) before the frame pointer setup in
down_write_killable(), which breaks frame pointer convention and can
result in incorrect stack traces.

Force the stack frame to be created before the call instruction by
listing the stack pointer as an output operand in the inline asm
statement.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1188b7015f04baf361e59de499ee2d7272c59dce.1476393828.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-18 12:21:16 +02:00
Geert Uytterhoeven
31ca587810 ceph: fix uninitialized dentry pointer in ceph_real_mount()
fs/ceph/super.c: In function ‘ceph_real_mount’:
    fs/ceph/super.c:818: warning: ‘root’ may be used uninitialized in this function

If s_root is already valid, dentry pointer root is never initialized,
and returned by ceph_real_mount(). This will cause a crash later when
the caller dereferences the pointer.

Fixes: ce2728aaa8 ("ceph: avoid accessing / when mounting a subpath")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-10-18 12:10:59 +02:00
Yan, Zheng
f72f94555a ceph: fix readdir vs fragmentation race
following sequence of events tigger the race

- client readdir frag 0* -> got item 'A'
- MDS merges frag 0* and frag 1*
- client send readdir request (frag 1*, offset 2, readdir_start 'A')
- MDS reply items (that are after item 'A') in frag *

Link: http://tracker.ceph.com/issues/17286
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-10-18 12:09:58 +02:00
Arnd Bergmann
e952813e21 ext2: avoid bogus -Wmaybe-uninitialized warning
On ARM, we get this false-positive warning since the rework of
the ext2_get_blocks interface:

fs/ext2/inode.c: In function 'ext2_get_block':
include/linux/buffer_head.h:340:16: error: 'bno' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The calling conventions for this function are rather complex, and it's
not surprising that the compiler gets this wrong, I spent a long time
trying to understand how it all fits together myself.

This change to avoid the warning makes sure the compiler sees that we
always set 'bno' pointer whenever we have a positive return code.
The transformation is correct because we always arrive at the 'got_it'
label with a positive count that gets used as the return value, while
any branch to the 'cleanup' label has a negative or zero 'err'.

Fixes: 6750ad7198 ("ext2: stop passing buffer_head to ext2_get_blocks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2016-10-18 11:29:35 +02:00
Jan Kara
a2ed0b391d isofs: Do not return EACCES for unknown filesystems
When isofs_mount() is called to mount a device read-write, it returns
EACCES even before it checks that the device actually contains an isofs
filesystem. This may confuse mount(8) which then tries to mount all
subsequent filesystem types in read-only mode.

Fix the problem by returning EACCES only once we verify that the device
indeed contains an iso9660 filesystem.

CC: stable@vger.kernel.org
Fixes: 17b7f7cf58
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Reported-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2016-10-18 11:28:21 +02:00
Shawn Guo
d3397484bb clk: hi6220: use CLK_OF_DECLARE_DRIVER for sysctrl and mediactrl clock init
The hi6220-sysctrl and hi6220-mediactrl are not only clock provider but
also reset controller.  It worked fine that single sysctrl/mediactrl
device node in DT can be used to initialize clock driver and populate
platform device for reset controller.  But it stops working after
commit 989eafd0b6 ("clk: core: Avoid double initialization of clocks")
gets merged.  The commit sets flag OF_POPULATED during clock
initialization to skip the platform device populating for the same
device node.  On hi6220, it effectively makes hi6220-sysctrl reset
driver not probe any more.

The patch changes hi6220 sysctrl and mediactrl clock init macro from
CLK_OF_DECLARE to CLK_OF_DECLARE_DRIVER, so that the reset driver using
the same hardware block can continue working.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17 15:42:58 -07:00
Gregory CLEMENT
4aa6c99d31 clk: mvebu: armada-37xx-periph: Fix the clock gate flag
For the gate part of the peripheral clock setting the bit disables the
clock and clearing it enables the clock. This is not the default behavior
of clk_gate component, so we need to use the CLK_GATE_SET_TO_DISABLE flag.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fixes: 8ca4746a78 ("clk: mvebu: Add the peripheral clock driver for Armada 3700")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17 15:35:10 -07:00
Eric Anholt
c4e634ce41 clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.
Fixes setting low-resolution video modes on HDMI.  Now the PLLH_PIX
divider adjusts itself until the PLLH is within bounds.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17 15:34:36 -07:00
Javier Martinez Canillas
1c7032258d clk: max77686: fix number of clocks setup for clk_hw based registration
The commit 9b4cac33ad ("clk: max77686: Migrate to clk_hw based OF and
registration APIs") converted the driver to use the new provider API to
register clocks using clk_hw.

But unfortunately, in the conversion it missed to set the num_clks value
which lead to the following error when trying to register a clk provider:

[    1.963782] of_clk_max77686_get: invalid index 0
[    1.967460] ERROR: could not get clock /rtc@10070000:rtc_src(1)
[    1.973638] s3c-rtc 10070000.rtc: failed to find rtc source clock

Fix it by correctly set the max77686_clk_driver_data num_clks member.

Fixes: 9b4cac33ad ("clk: max77686: Migrate to clk_hw based OF and registration APIs")
Reported-by: Markus Reichl <m.reichl@fivetechno.de>
Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17 15:31:59 -07:00
Gregory CLEMENT
981e1bea55 clk: mvebu: armada-37xx-periph: Fix the clock provider registration
While trying using a peripheral clock on a driver, I saw that the clock
pointer returned by the provider was NULL.

The problem was a missing indirection. It was the pointer stored in the
hws array which needed to be updated not the value it contains.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fixes: 8ca4746a78 ("clk: mvebu: Add the peripheral clock driver for Armada 3700")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17 15:31:49 -07:00
Shawn Guo
339e1e5489 clk: core: add __init decoration for CLK_OF_DECLARE_DRIVER function
The new introduced macro CLK_OF_DECLARE_DRIVER is usually used to
declare clock driver init functions, which are mostly decorated with
__init.  Add __init decoration for CLK_OF_DECLARE_DRIVER function to
avoid causing section mismatch warnings on client clock drivers.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Fixes: c7296c51ce ("clk: core: New macro CLK_OF_DECLARE_DRIVER")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17 15:27:27 -07:00
Jean Delvare
234d511d8c clk: mediatek: Add hardware dependency
Only propose the mediatek clock drivers on this platform, unless
build-testing.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Shunli Wang <shunli.wang@mediatek.com>
Cc: James Liao <jamesjj.liao@mediatek.com>
Cc: Erin Lo <erin.lo@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17 15:22:26 -07:00
Javier Martinez Canillas
34b89b2967 clk: samsung: clk-exynos-audss: Fix module autoload
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/clk/samsung/clk-exynos-audss.ko | grep alias
alias:          platform:exynos-audss-clk

After this patch:

$ modinfo drivers/clk/samsung/clk-exynos-audss.ko | grep alias
alias:          platform:exynos-audss-clk
alias:          of:N*T*Csamsung,exynos5420-audss-clockC*
alias:          of:N*T*Csamsung,exynos5420-audss-clock
alias:          of:N*T*Csamsung,exynos5410-audss-clockC*
alias:          of:N*T*Csamsung,exynos5410-audss-clock
alias:          of:N*T*Csamsung,exynos5250-audss-clockC*
alias:          of:N*T*Csamsung,exynos5250-audss-clock
alias:          of:N*T*Csamsung,exynos4210-audss-clockC*
alias:          of:N*T*Csamsung,exynos4210-audss-clock

Fixes: 4d252fd571 ("clk: samsung: Allow modular build of the Audio Subsystem CLKCON driver")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17 15:21:48 -07:00
Masahiro Yamada
c0ce317f0c clk: uniphier: fix type of variable passed to regmap_read()
The 3rd argument of regmap_read() takes a pointer to unsigned int.
This driver is saved just because u32 happens to be typedef'ed as
unsigned int, but we should not rely on that fact.  Change the
variable type just in case.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17 15:20:52 -07:00
Masahiro Yamada
8236d9ac4c clk: uniphier: add system clock support for sLD3 SoC
I do not know why, but I missed to add this compatible string in
the initial commit of this driver.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17 15:20:50 -07:00
Junjie Mao
14155cafea btrfs: assign error values to the correct bio structs
Fixes: 4246a0b63b ("block: add a bi_error field to struct bio")
Signed-off-by: Junjie Mao <junjie.mao@enight.me>
Acked-by: David Sterba <dsterba@suse.cz>
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-17 14:16:14 -07:00
Dave Hansen
eac0ca77e4 x86, pkeys: remove cruft from never-merged syscalls
pkey_set() and pkey_get() were syscalls present in older versions
of the protection keys patches.  The syscall number definitions
were inadvertently left in place.  This patch removes them.

I did a git grep and verified that these are the last places in
the tree that these appear, save for the protection_keys.c tests
and Documentation.  Those spots talk about functions called
pkey_get/set() which are wrappers for the direct PKRU
instructions, not the syscalls.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: mgorman@techsingularity.net
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Fixes: f9afc6197e ("x86: Wire up protection keys system calls")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-17 14:16:13 -07:00
Will Deacon
91cb163e4d arm64: sysreg: Fix use of XZR in write_sysreg_s
Commit 8a71f0c656 ("arm64: sysreg: replace open-coded mrs_s/msr_s with
{read,write}_sysreg_s") introduced a write_sysreg_s macro for writing
to system registers that are not supported by binutils.

Unfortunately, this was implemented with the wrong template (%0 vs %x0),
so in the case that we are writing a constant 0, we will generate
invalid instruction syntax and bail with a cryptic assembler error:

  | Error: constant expression required

This patch fixes the template.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-17 19:38:30 +01:00
Dan Carpenter
94cdc5608b hwmon: (max31790) potential ERR_PTR dereference
We should only dereference "data" after we check if it is an error
pointer.

Fixes: 54187ff9d7 ('hwmon: (max31790) Convert to use new hwmon registration API')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-10-17 10:16:20 -07:00
Chris Packham
667f4bab81 hwmon: (adm9240) handle temperature readings below 0
Unlike the temperature thresholds the temperature data is a 9-bit signed
value. This allows and additional 0.5 degrees of precision on the
reading but makes handling negative values slightly harder. In order to
have sign-extension applied correctly the 9-bit value is stored in the
upper bits of a signed 16-bit value. When presenting this in sysfs the
value is shifted and scaled appropriately.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-10-17 10:16:20 -07:00
Dave Hansen
71757904ef generic syscalls: kill cruft from removed pkey syscalls
pkey_set() and pkey_get() were syscalls present in older versions
of the protection keys patches.  They were fully excised from the
x86 code, but some cruft was left in the generic syscall code.  The
C++ comments were intended to help to make it more glaring to me to
fix them before actually submitting them.  That technique worked,
but later than I would have liked.

I test-compiled this for arm64.

Fixes: a60f7b69d9 ("generic syscalls: Wire up memory protection keys syscalls")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: linux-arch@vger.kernel.org
Cc: mgorman@techsingularity.net
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-17 09:50:56 -07:00
Vladimir Murzin
9224eb77e6 irqchip/gic-v3-its: Fix entry size mask for GITS_BASER
Entry Size in GITS_BASER<n> occupies 5 bits [52:48], but we mask out 8
bits.

Fixes: cc2d3216f5 ("irqchip: GICv3: ITS command queue")
Cc: stable@vger.kernel.org
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-10-17 16:26:29 +01:00
Ard Biesheuvel
8fe88a4145 arm64: kaslr: keep modules close to the kernel when DYNAMIC_FTRACE=y
The RANDOMIZE_MODULE_REGION_FULL Kconfig option allows KASLR to be
configured in such a way that kernel modules and the core kernel are
allocated completely independently, which implies that modules are likely
to require branches via PLT entries to reach the core kernel. The dynamic
ftrace code does not expect that, and assumes that it can patch module
code to perform a relative branch to anywhere in the core kernel. This
may result in errors such as

  branch_imm_common: offset out of range
  ------------[ cut here ]------------
  WARNING: CPU: 3 PID: 196 at kernel/trace/ftrace.c:1995 ftrace_bug+0x220/0x2e8
  Modules linked in:

  CPU: 3 PID: 196 Comm: systemd-udevd Not tainted 4.8.0-22-generic #24
  Hardware name: AMD Seattle/Seattle, BIOS 10:34:40 Oct  6 2016
  task: ffff8d1bef7dde80 task.stack: ffff8d1bef6b0000
  PC is at ftrace_bug+0x220/0x2e8
  LR is at ftrace_process_locs+0x330/0x430

So make RANDOMIZE_MODULE_REGION_FULL mutually exclusive with DYNAMIC_FTRACE
at the Kconfig level.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-17 16:24:02 +01:00
Marc Zyngier
850540351b arm64: kernel: Init MDCR_EL2 even in the absence of a PMU
Commit f436b2ac90 ("arm64: kernel: fix architected PMU registers
unconditional access") made sure we wouldn't access unimplemented
PMU registers, but also left MDCR_EL2 uninitialized in that case,
leading to trap bits being potentially left set.

Make sure we always write something in that register.

Fixes: f436b2ac90 ("arm64: kernel: fix architected PMU registers unconditional access")
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-17 15:54:30 +01:00