Commit Graph

227 Commits

Author SHA1 Message Date
Markus Elfring
79ba1814da AVR32-pio: Replace two seq_printf() calls by seq_puts() in pio_bank_show()
Strings which did not contain data format specifications should be put
into a sequence. Thus use the corresponding function "seq_puts".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2016-12-12 09:05:46 +01:00
Markus Elfring
78b7c6bff1 AVR32-pio: Use seq_putc() in pio_bank_show()
A single character (line break) should be put into a sequence.
Thus use the corresponding function "seq_putc".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2016-12-12 09:05:46 +01:00
Markus Elfring
017e7d0246 AVR32-clock: Combine nine seq_printf() calls into one call in clk_show()
Some data were printed into a sequence by nine separate function calls.
Print the same data by a single function call instead.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2016-12-12 09:05:46 +01:00
Markus Elfring
65c0787ce0 AVR32-clock: Use seq_putc() in two functions
A single character (line break) should be put into two sequences.
Thus use the corresponding function "seq_putc".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2016-12-12 09:05:46 +01:00
Dan Carpenter
55f1cf83d5 avr32: off by one in at32_init_pio()
The pio_dev[] array has MAX_NR_PIO_DEVICES elements so the > should be
>=.

Fixes: 5f97f7f940 ('[PATCH] avr32 architecture')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
2016-07-29 11:55:57 +02:00
Andy Shevchenko
c422025c18 dmaengine: dw: rename masters to reflect actual topology
The source and destination masters are reflecting buses or their layers to
where the different devices can be connected. The patch changes the master
names to reflect which one is related to which independently on the transfer
direction.

The outcome of the change is that the memory data width is now always limited
by a data width of the master which is dedicated to communicate to memory.

The patch will not break anything since all current users have the same data
width for all masters. Though it would be nice to revisit avr32 platforms to
check what is the actual hardware topology in use there. It seems that it has
one bus and two masters on it as stated by Table 8-2, that's why everything
works independently on the master in use. The purpose of the sequential patch
is to fix the driver for configuration of more than one bus.

The change is done in the assumption that src_master and dst_master are
reflecting a connection to the memory and peripheral correspondently on avr32
and otherwise on the rest.

Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-13 21:36:09 +05:30
Bjorn Helgaas
288e6eaa06 gpio: Include linux/gpio.h instead of asm/gpio.h
Most arches have an asm/gpio.h that merely includes linux/gpio.h.  The
others select ARCH_HAVE_CUSTOM_GPIO_H, and when that's selected,
linux/gpio.h includes asm/gpio.h.

Therefore, code should include linux/gpio.h instead of including asm/gpio.h
directly.

Remove includes of asm/gpio.h, adding an include of linux/gpio.h when
necessary.

This is a follow-on to 7563bbf89d ("gpiolib/arches: Centralise
bolierplate asm/gpio.h").

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-16 00:20:03 +01:00
Linus Torvalds
d90f351a9b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32
Pull AVR32 updates from Hans-Christian Noren Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  mmc: atmel: get rid of struct mci_dma_data
  mmc: atmel-mci: restore dma on AVR32
  avr32: wire up missing syscalls
  avr32: wire up accept4 syscall
2016-01-18 12:50:55 -08:00
Mans Rullgard
238d1c6041 mmc: atmel: get rid of struct mci_dma_data
As struct mci_dma_data is now only used by AVR32, it is nothing but
pointless indirection.  Replace it with struct dw_dma_slave in the
AVR32 platform code and with a void pointer elsewhere.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-14 13:40:30 +01:00
Mans Rullgard
7484378715 mmc: atmel-mci: restore dma on AVR32
Commit ecb89f2f5f ("mmc: atmel-mci: remove compat for non DT board
when requesting dma chan") broke dma on AVR32 and any other boards not
using DT.  This restores a fallback mechanism for such cases.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-14 13:40:13 +01:00
Linus Walleij
95bf0951e4 avr32: gpio: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-07 00:07:39 +01:00
Linus Walleij
58383c7842 gpio: change member .dev to .parent
The name .dev in a struct is normally reserved for a struct device
that is let us say a superclass to the thing described by the struct.
struct gpio_chip stands out by confusingly using a struct device *dev
to point to the parent device (such as a platform_device) that
represents the hardware. As we want to give gpio_chip:s real devices,
this is not working. We need to rename this member to parent.

This was done by two coccinelle scripts, I guess it is possible to
combine them into one, but I don't know such stuff. They look like
this:

@@
struct gpio_chip *var;
@@
-var->dev
+var->parent

and:

@@
struct gpio_chip var;
@@
-var.dev
+var.parent

and:

@@
struct bgpio_chip *var;
@@
-var->gc.dev
+var->gc.parent

Plus a few instances of bgpio that I couldn't figure out how
to teach Coccinelle to rewrite.

This patch hits all over the place, but I *strongly* prefer this
solution to any piecemal approaches that just exercise patch
mechanics all over the place. It mainly hits drivers/gpio and
drivers/pinctrl which is my own backyard anyway.

Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Alek Du <alek.du@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19 09:24:35 +01:00
Linus Torvalds
041c79514a dmaengine updates for 4.4-rc1
This time we have a very typical update which is mostly fixes and updates to
 drivers and no new drivers.
 
 - Biggest change is coming from Peter for edma cleanup which even caused
   some last minute regression, things seem settled now
 - idma64 and dw updates
 - iotdma updates
 - module autoload fixes for various drivers
 - scatter gather support for hdmac
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWP1vYAAoJEHwUBw8lI4NHKg8QAKwJ/iPxZDMfWwCLAoZoeaDp
 GgOmxIZ3LWrFQHIziI1IUcxSAU28Z+N6GBziaXycw49oQic4J/ukHGhgxwI2GM/W
 JGbFzHalnwdGqKzVZyfWGV0njT3KRvwKl7qqb66ZhikF5lD5imga66QGGxof8wBK
 uoXra7yycrE8nGpyY5Gdd4H59aWVyAK1fW6+0cxa2kMfWo8vLkgj/olbzYZydhQz
 DFCEvx2hbTyP/8VjGybVhtd+oeLjX43tGJOm6weyCb/8z3/soD73CChZIP53Mt6i
 g+LKPfurRZ3VGILgdemkiMB+5pXi4jhmziw5pCSI6BluUGVZAMyg8hC1zapFUr/2
 HaLfVmtxYdsBlceuMss1f3vyN2d+kRdDPKlOb9Td0PC2TEpSa5QayuMscvVfau+Q
 epSdIxgjlHqAVDVZJ0kX55FLdmItx36tat6zJL5cUcZmrDvEY3TQmvcXyR2dIltY
 U9WB2lRaETOG4Js0gAItXDjijNvLs0F4q10Zk6RdH4BcWbuqvONAhaCpWKeOWNsf
 NgQkkg+DqHqol6+C0pI0uX6dvEfwJuZ4bqq98wl4SryuxWJNra/g55/oFEFDbJCU
 oRMPYguMUgV8tzCpAurmDhxcrsZu/dvaSSW+flVz2QP81ecvFjRnZ8hhXbCr6iWi
 VVoAISmQBQPCXoqPr7ZC
 =tIzO
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time we have a very typical update which is mostly fixes and
  updates to drivers and no new drivers.

   - the biggest change is coming from Peter for edma cleanup which even
     caused some last minute regression, things seem settled now
   - idma64 and dw updates
   - iotdma updates
   - module autoload fixes for various drivers
   - scatter gather support for hdmac"

* tag 'dmaengine-4.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (77 commits)
  dmaengine: edma: Add dummy driver skeleton for edma3-tptc
  Revert "ARM: DTS: am33xx: Use the new DT bindings for the eDMA3"
  Revert "ARM: DTS: am437x: Use the new DT bindings for the eDMA3"
  dmaengine: dw: some Intel devices has no memcpy support
  dmaengine: dw: platform: provide platform data for Intel
  dmaengine: dw: don't override platform data with autocfg
  dmaengine: hdmac: Add scatter-gathered memset support
  dmaengine: hdmac: factorise memset descriptor allocation
  dmaengine: virt-dma: Fix kernel-doc annotations
  ARM: DTS: am437x: Use the new DT bindings for the eDMA3
  ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
  dmaengine: edma: New device tree binding
  dmaengine: Kconfig: edma: Select TI_DMA_CROSSBAR in case of ARCH_OMAP
  dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx
  dmaengine: edma: Merge the of parsing functions
  dmaengine: edma: Do not allocate memory for edma_rsv_info in case of DT boot
  dmaengine: edma: Refactor the dma device and channel struct initialization
  dmaengine: edma: Get qDMA channel information from HW also
  dmaengine: edma: Merge map_dmach_to_queue into assign_channel_eventq
  dmaengine: edma: Correct PaRAM access function names (_parm_ to _param_)
  ...
2015-11-10 10:05:17 -08:00
Andy Shevchenko
49dfebebfb avr32: use dw_dmac autoconfiguration
Instead of hardcoding a platform data for dw_dmac let's use it's own
autoconfiguration feature. Thus, remove hardcoded values.

Tested on ATNGW100.

Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30 13:43:09 +05:30
Thomas Gleixner
bd0b9ac405 genirq: Remove irq argument from irq flow handlers
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16 15:47:51 +02:00
Linus Torvalds
17e6b00ac4 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "This updated pull request does not contain the last few GIC related
  patches which were reported to cause a regression.  There is a fix
  available, but I let it breed for a couple of days first.

  The irq departement provides:

   - new infrastructure to support non PCI based MSI interrupts
   - a couple of new irq chip drivers
   - the usual pile of fixlets and updates to irq chip drivers
   - preparatory changes for removal of the irq argument from interrupt
     flow handlers
   - preparatory changes to remove IRQF_VALID"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
  irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources
  irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
  irqchip: Add documentation for the bcm2836 interrupt controller
  irqchip/bcm2835: Add support for being used as a second level controller
  irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ
  PCI: xilinx: Fix typo in function name
  irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
  irqchip/gic: Only allow the primary GIC to set the CPU map
  PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove
  unicore32/irq: Prepare puv3_gpio_handler for irq argument removal
  tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal
  m68k/irq: Prepare irq handlers for irq argument removal
  C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal
  blackfin: Prepare irq handlers for irq argument removal
  arc/irq: Prepare idu_cascade_isr for irq argument removal
  sparc/irq: Use access helper irq_data_get_affinity_mask()
  sparc/irq: Use helper irq_data_get_irq_handler_data()
  parisc/irq: Use access helper irq_data_get_affinity_mask()
  mn10300/irq: Use access helper irq_data_get_affinity_mask()
  irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal
  ...
2015-09-01 14:33:35 -07:00
Andy Shevchenko
5c02a42065 avr32: handle NULL as a valid clock object
Since NULL is used as valid clock object on optional clocks we have to handle
this case in avr32 implementation as well.

Fixes: e1824dfe0d (net: macb: Adjust tx_clk when link speed changes)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2015-07-27 09:14:07 +02:00
Jiang Liu
df6e23ae62 avr32/irq: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we
already have a pointer to corresponding irq_desc.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Link: http://lkml.kernel.org/r/20150713100606.527106283@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-26 11:47:25 +02:00
Thomas Gleixner
4f31dd63e0 avr32/at32ap: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Link: http://lkml.kernel.org/r/20150713100606.448031045@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-26 11:47:25 +02:00
Thomas Gleixner
4365160def avr32/at32ap: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Link: http://lkml.kernel.org/r/20150713100606.351640193@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-26 11:47:25 +02:00
Thomas Gleixner
bf54da7d3a avr32/at32ap: Fix race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
|
-irq_set_chained_handler(E1, E3);
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
...
|
-irq_set_chained_handler(E1, E3);
...
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2015-06-25 11:57:52 +02:00
Linus Torvalds
ce1d3fde87 Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
 "This update brings:

   - the big cleanup up by Maxime for device control and slave
     capabilities.  This makes the API much cleaner.

   - new IMG MDC driver by Andrew

   - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with
     bunch of fixes on rcar drivers

   - odd fixes and updates spread over driver"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits)
  dmaengine: pl330: add DMA_PAUSE feature
  dmaengine: pl330: improve pl330_tx_status() function
  dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
  dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
  dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
  dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
  dmaengine: rcar-dmac: Fix spinlock issues in interrupt
  dmaenegine: edma: fix sparse warnings
  dmaengine: rcar-dmac: Fix uninitialized variable usage
  dmaengine: shdmac: extend PM methods
  dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
  dmaengine: pl330: fix bug that cause start the same descs in cyclic
  dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
  dmaengine: at_xdmac: simplify channel configuration stuff
  dmaengine: at_xdmac: introduce save_cc field
  dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
  ioat: fail self-test if wait_for_completion times out
  dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
  dmaengine: dw: amend description of dma_dev field
  dmatest: move src_off, dst_off, len inside loop
  ...
2015-02-18 08:49:20 -08:00
Alexandre Belloni
a31c353de1 avr32: remove fake at91 cpu identification
cpu_is_at91* are not used in any driver outside mach-at91. Remove those
useless definitions.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-02-09 15:27:45 +01:00
Andy Shevchenko
d8ded50f8b dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
Instead of using magic number in the code the patch provides
DW_DMA_MAX_NR_MASTERS constant.

While here, restrict the reading of data width array by amount of the actual
number of AHB masters.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 22:39:44 -08:00
Alexandre Belloni
4df10e02aa avr32: remove mach/atmel-mci.h
Use the generic platform_data header file instead of mach/atmel-mci.h

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10 12:40:38 +01:00
Andy Shevchenko
7e1e2f27c5 dmaengine: dw: convert dw_dma_slave to use explicit HS interfaces
Instead of exposing the possibility to set DMA registers CFG_HI and CFG_LO
strict user to provide handshake interfaces explicitly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11 11:48:12 +05:30
Andy Shevchenko
61c4319cb5 avr32: at32ap700x: don't rely on default DMA masters
In future we are going to remove the defaults of AHB masters from dw_dmac
driver. It means each user have to supply proper source and destination masters
by itself explicitly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11 11:48:12 +05:30
Andy Shevchenko
3d598f47e8 dmaengine: dw: move dw_dmac.h to where it belongs to
There is a common storage for platform data related structures and definitions
inside kernel source tree. The patch moves file from include/linux to
include/linux/platform_data and renames it acoordingly. The users are also
updated.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[For the arch/avr32/.* and .*sound/atmel.*]
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11 11:48:12 +05:30
Alexandre Belloni
2c43ec9448 avr32/at32ap: switch to the generic PWM framework
Switch to the pwm/pwm-atmel driver instead of misc/atmel_pwm

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09 15:13:31 +02:00
Matthias Brugger
e6a7906cbf avr32: pm: Fix section mismatch
The power management has a section mismatch which leads to the following
warning during compilation:

WARNING: arch/avr32/mach-at32ap/built-in.o(.text+0x16d4): Section
mismatch in reference from the function avr32_pm_offset() to the
function .init.text:pm_exception()
The function avr32_pm_offset() references
the function __init pm_exception().

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>
2013-12-10 08:46:38 +01:00
Jean-Christophe PLAGNIOL-VILLARD
8af2c2869f video: atmel_lcdfb: fix platform data struct
Today we mix pdata and drivers data in the struct atmel_lcdfb_info
Fix it and introduce a new struct atmel_lcdfb_pdata for platform data only

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27 09:26:19 +03:00
Josh Wu
71b94e2e86 mtd: atmel_nand: replace cpu_is_at32ap7000() with a nand platform data
The nand driver use cpu_is_at32ap7000() macro for a workaround. For the
multi-platform support, we will remove this cpu_is_xxx() macro.

This patch adds a boolean variable need_reset_workaround in structure
atmel_nand_data. Using this variable we can remove cpu_is_at32ap7000() macro.

Hans-Christian: Feel free to push this through the mtd tree, if they won't
accept it I'm working on getting my workflow up on the linux-avr32.git tree.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05 20:55:42 +01:00
Geert Uytterhoeven
b5cc489145 avr32: atmel_default_console_device depends on CONFIG_SERIAL_ATMEL
allnoconfig:

arch/avr32/mach-at32ap/built-in.o: In function `at32_select_gpio':
(.init.text+0x548): undefined reference to `atmel_default_console_device'

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2013-06-16 13:47:16 +02:00
Linus Torvalds
6fa52ed33b ARM: arm-soc driver changes for 3.10
This is a rather large set of patches for device drivers that for one
 reason or another the subsystem maintainer preferred to get merged
 through the arm-soc tree. There are both new drivers as well as
 existing drivers that are getting converted from platform-specific
 code into standalone drivers using the appropriate subsystem
 specific interfaces.
 
 In particular, we can now have pinctrl, clk, clksource and irqchip
 drivers in one file per driver, without the need to call into
 platform specific interface, or to get called from platform specific
 code, as long as all information about the hardware is provided
 through a device tree.
 
 Most of the drivers we touch this time are for clocksource. Since
 now most of them are part of drivers/clocksource, I expect that we
 won't have to touch these again from arm-soc and can let the
 clocksource maintainers take care of these in the future.
 
 Another larger part of this series is specific to the exynos platform,
 which is seeing some significant effort in upstreaming and
 modernization of its device drivers this time around, which
 unfortunately is also the cause for the churn and a lot of the
 merge conflicts.
 
 There is one new subsystem that gets merged as part of this series:
 the reset controller interface, which is a very simple interface
 for taking devices on the SoC out of reset or back into reset.
 Patches to use this interface on i.MX follow later in this merge
 window, and we are going to have other platforms (at least tegra
 and sirf) get converted in 3.11. This will let us get rid of
 platform specific callbacks in a number of platform independent
 device drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhKUsAAoJEIwa5zzehBx3Ug4P/RqEen15hxS/NY8SIVRAU5c0
 G9ZiSPcLmvXGR/t1RZFeLWKaKOYRb2oW1EbXrlkddprkmg85RuQE/KMpCgzPPhVC
 Yrs8UaagMGblaLOjwavVjin/CUXZokRdMfsQoIyMGOezmVGFnv4d4Kt64IOf35DF
 24vDv/QO0BAI9k6m6WLqlWvSshb0IkW8r2LneRLnMEAVop7b1xkOxz0sR6l0LWfV
 6JAMXyTjJMg0t8uCVW/QyNdxcxINHhV4SYcNkzF3EZ7ol50OiJsT9fg0XW759+Wb
 vlX6Xuehg+CBOg+g3ZOZuR8JOEkOhAGRSzuJkk/TmLCCxc+ghnuYz8HArxh6GMHK
 KaxvogLIi0ZsD94A/BZIKkDtOLWlzdz2HBrYo9PTz8zrOz/gXhwQ3zq0jPccC5E0
 S+YYiobCBXepknF9301ti7wGD9VDzI8nmqOKG6tEBrD3xuO+RoBv+z4pBugN4/1C
 DlB19gOz60G5kniziL+wlmWER2qXmYrQZqS+s6+B2XoyoETC0Yij3Rck5vyC6qIK
 A2sni+Y9rzNOB9nzmnISP/UiGUffCy8AV4DZJjMSl0XkF4cpOXqRVGZ2nGB4tR5q
 GTOETcDCo5dvMDKX7Wfrz40CQzO39tnPCddg3OIS93ZwMpCeykIlb1FVL7RcsyF7
 3uikzYHlDo3C5pvtJ5TS
 =ZWk9
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...
2013-05-04 12:31:18 -07:00
Linus Torvalds
3ed1c478ef Power management and ACPI updates for 3.10-rc1
- ARM big.LITTLE cpufreq driver from Viresh Kumar.
 
 - exynos5440 cpufreq driver from Amit Daniel Kachhap.
 
 - cpufreq core cleanup and code consolidation from Viresh Kumar and
   Stratos Karafotis.
 
 - cpufreq scalability improvement from Nathan Zimmer.
 
 - AMD "frequency sensitivity feedback" powersave bias for the ondemand
   cpufreq governor from Jacob Shin.
 
 - cpuidle code consolidation and cleanups from Daniel Lezcano.
 
 - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.
 
 - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim,
   Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.
 
 - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
   Yasuaki Ishimatsu, and Rafael J. Wysocki.
 
 - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements
   from Rafael J. Wysocki and Andy Shevchenko.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRf8M8AAoJEKhOf7ml8uNsud4P/3cabXP5lDipzibRrpOiONse
 puuvIdhtNdMRMc3t1oSDjNH/w/JA51Gc+ICGFAORiyVmqxBc85mpT6J5ibqV7hNd
 pCqbKJceoB5PajHZSx22e4wG9O7YN1k3r80p38IfFzA+Ct0KNSuE0ixMEfHKYjiq
 p5pXswk6TY3gtBReH9agrafHqDtXw4IMTE0asMuJ+BorPW7vQeiNlrkuA+0qmDuu
 26O0Pm2TVkx1ryfTjdM9zSZ9X2G4JuM8rm1/VFZWQJTExwlv3bA2Za1nvQNJlJ99
 6JZ0JXfAehcEW2Ye0sqsZ8HSEabDVHM29QvvOszJ5RpBXERiOCHOkhvFleCoTpn0
 Xq0rtXPrLMH1G28Ej+cxmsAjfzOLV2Byg30CAoI/GCLuQ+xh+VMCpuNYQuld25CG
 9rtYd0fWESeYsAebhDcX0E3xyzJtbrHtOb9PyGwNkbAJ8YQfhVSMCOPi2SX2wa+Q
 qXLXi2VaHvjBSUKcAv5BmM+Ya57Be+88D0LxbgXbUeOnYefUK1ljldKDDshkMjgG
 P4LPdm4JpoB5ncXSOO1Dz9w9QnNcFexSUySd/TtKLNMha1vEHV8ISzNPYY+9IdXf
 XN0VZbFnUDzdj+Fwna7zyFb1cGihDYJKAtpXvRd8Y6RGUxKx9uGLAFJZw/xZB/cR
 KZKuML5O8MgJuef37F38
 =H/se
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael J Wysocki:

 - ARM big.LITTLE cpufreq driver from Viresh Kumar.

 - exynos5440 cpufreq driver from Amit Daniel Kachhap.

 - cpufreq core cleanup and code consolidation from Viresh Kumar and
   Stratos Karafotis.

 - cpufreq scalability improvement from Nathan Zimmer.

 - AMD "frequency sensitivity feedback" powersave bias for the ondemand
   cpufreq governor from Jacob Shin.

 - cpuidle code consolidation and cleanups from Daniel Lezcano.

 - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.

 - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv
   Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.

 - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
   Yasuaki Ishimatsu, and Rafael J Wysocki.

 - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from
   Rafael J Wysocki and Andy Shevchenko.

* tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits)
  cpufreq: Revert incorrect commit 5800043
  cpufreq: MAINTAINERS: Add co-maintainer
  cpuidle: add maintainer entry
  ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points
  ARM: s3c64xx: cpuidle: use init/exit common routine
  cpufreq: pxa2xx: initialize variables
  ACPI: video: correct acpi_video_bus_add error processing
  SH: cpuidle: use init/exit common routine
  ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
  ACPI: Fix wrong parameter passed to memblock_reserve
  cpuidle: fix comment format
  pnp: use %*phC to dump small buffers
  isapnp: remove debug leftovers
  ARM: imx: cpuidle: use init/exit common routine
  ARM: davinci: cpuidle: use init/exit common routine
  ARM: kirkwood: cpuidle: use init/exit common routine
  ARM: calxeda: cpuidle: use init/exit common routine
  ARM: tegra: cpuidle: use init/exit common routine for tegra3
  ARM: tegra: cpuidle: use init/exit common routine for tegra2
  ARM: OMAP4: cpuidle: use init/exit common routine
  ...
2013-04-30 15:21:02 -07:00
Viresh Kumar
81c720c90e cpufreq: AVR32: move cpufreq driver to drivers/cpufreq
This patch moves cpufreq driver of AVR32 based at32ap platform to
drivers/cpufreq.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10 13:19:25 +02:00
Thomas Gleixner
01426478df avr32: Use generic idle loop
Also replace the idle poll enforcement by the generic functionality.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Link: http://lkml.kernel.org/r/20130321215233.950290809@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-08 17:39:24 +02:00
Viresh Kumar
b43a7ffbf3 cpufreq: Notify all policy->cpus in cpufreq_notify_transition()
policy->cpus contains all online cpus that have single shared clock line. And
their frequencies are always updated together.

Many SMP system's cpufreq drivers take care of this in individual drivers but
the best place for this code is in cpufreq core.

This patch modifies cpufreq_notify_transition() to notify frequency change for
all cpus in policy->cpus and hence updates all users of this API.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-02 15:24:00 +02:00
Johan Hovold
bbd44f6bd9 ARM: at91/avr32/atmel_lcdfb: add platform device-id table
Add platform device-id table in order to identify the controller and
determine its configuration.

The currently used configuration parameters are:

have_alt_pixclock
 - SOC uses an alternate pixel-clock calculation formula (at91sam9g45
   non-ES)

have_hozval
 - SOC has a HOZVAL field in LCDFRMCFG which is used to determine the
   linesize for STN displays (at91sam9261, at921sam9g10 and at32ap)

have_intensity_bit
 - SOC uses IBGR:555 rather than BGR:565 16-bit pixel layout
   (at91sam9261, at91sam9263 and at91sam9rl)

This allows us to remove all the remaining uses of cpu_is macros from
the driver.

Tested on at91sam9263 and at91sam9g45, compile-tested for other
AT91-SOCs, and untested for AVR32.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-13 11:05:12 +01:00
Johan Hovold
557b7d5d07 ARM: at91/avr32/atmel_lcdfb: add bus-clock entry
Add hclk entry for the atmel_lcdfb bus clock.

On at91sam9261, at91sam9g10 and at32ap the bus clock has to be enabled
as well as the peripheral clock. Add the appropriate lookup entries to
these SOCs and fake clocks to the SOCs that do not use it.

This allows us to get rid of the conditional enabling of the clocks in
the driver which relied on the cpu_is macros.

Tested on at91sam9263 and at91sam9g45, compile-tested for other
AT91-SOCs, and untested for AVR32.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-13 11:05:11 +01:00
Jean-Christophe PLAGNIOL-VILLARD
2abb74eaf6 atmel: move ATMEL_MAX_UART to platform_data/atmel.h
Modify both AT91 and AVR32 platforms.
Use 7 for it as the sam9260 or the sam9g25 have 7 of them DBGU included.

Reported-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-19 17:44:54 +01:00
Jean-Christophe PLAGNIOL-VILLARD
bcd2360c1f arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06 20:29:33 +08:00
Andy Shevchenko
a09820043c dw_dmac: autoconfigure data_width or get it via platform data
Not all of the controllers support the 64 bit data width. Make it configurable
via platform data. The driver will try to get a value from the component
parameters, otherwise it will use the platform data.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-27 15:35:23 +05:30
Andy Shevchenko
4a63a8b3e8 dw_dmac: autoconfigure block_size or use platform data
The maximum block size is a configurable parameter for the chip. So, driver
will try to get it from the encoded component parameters. Otherwise it will
come from the platform data.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-27 15:35:23 +05:30
Paul Gortmaker
3d92e05118 avr32: fix build failures from mis-naming of atmel_nand.h
Commit bf4289cba0 ("ATMEL: fix nand ecc support") indicated that it
wanted to "Move platform data to a common header
include/linux/platform_data/atmel_nand.h" and the new header even had
re-include protectors with:

    #ifndef __ATMEL_NAND_H__

However, the file that was added was simply called atmel.h
and this caused avr32 defconfig to fail with:

  In file included from arch/avr32/boards/atstk1000/setup.c:22:
  arch/avr32/mach-at32ap/include/mach/board.h:10:44: error: linux/platform_data/atmel_nand.h: No such file or directory
  In file included from arch/avr32/boards/atstk1000/setup.c:22:
  arch/avr32/mach-at32ap/include/mach/board.h:121: warning: 'struct atmel_nand_data' declared inside parameter list
  arch/avr32/mach-at32ap/include/mach/board.h:121: warning: its scope is only this definition or declaration, which is probably not what you want
  make[2]: *** [arch/avr32/boards/atstk1000/setup.o] Error 1

It seems the scope of the file contents will expand beyond
just nand, so ignore the original intention, and fix up the
users who reference the bad name with the _nand suffix.

CC: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
CC: David Woodhouse <dwmw2@infradead.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-02 14:41:25 -07:00
Linus Torvalds
ef08e78268 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine update from Vinod Koul:
 "This includes the cookie cleanup by Russell, the addition of context
  parameter for dmaengine APIs, more arm dmaengine driver cleanup by
  moving code to dmaengine, this time for imx by Javier and pl330 by
  Boojin along with the usual driver fixes."

Fix up some fairly trivial conflicts with various other cleanups.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits)
  dmaengine: imx: fix the build failure on x86_64
  dmaengine: i.MX: Fix merge of cookie branch.
  dmaengine: i.MX: Add support for interleaved transfers.
  dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages.
  dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'.
  dmaengine: imx-dma: remove unused arg of imxdma_sg_next.
  dmaengine: imx-dma: remove internal structure.
  dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure.
  dmaengine: imx-dma: remove 'in_use' field of 'internal' structure.
  dmaengine: imx-dma: remove sg member from internal structure.
  dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.
  dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.
  dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.
  dmaengine: imx-dma: remove dma_mode member of internal structure.
  dmaengine: imx-dma: remove data member from internal structure.
  dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c
  dmaengine: at_hdmac: add slave config operation
  dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic
  dmaengine/dma_slave: introduce inline wrappers
  dma: imx-sdma: Treat firmware messages as warnings instead of erros
  ...
2012-03-29 15:34:57 -07:00
Linus Torvalds
0195c00244 Disintegrate and delete asm/system.h
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
 8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
 u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
 ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
 rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
 eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
 HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
 /5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
 Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
 4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
 FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
 NypQthI85pc=
 =G9mT
 -----END PGP SIGNATURE-----

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...
2012-03-28 15:58:21 -07:00
David Howells
ae47394658 Disintegrate asm/system.h for AVR32
Disintegrate asm/system.h for AVR32.  This has not been compiled at all.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
2012-03-28 18:30:01 +01:00
Jean-Christophe PLAGNIOL-VILLARD
bf4289cba0 ATMEL: fix nand ecc support
So we can now choose for the board the ecc mode (ecc soft, soft bch, no ecc
and hardware).

Set ecc mode in the boards to soft as currently in the driver.

Move platform data to a common header
include/linux/platform_data/atmel_nand.h

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: David Woodhouse <dwmw2@infradead.org>
2012-03-15 23:26:32 +08:00
Jean-Christophe PLAGNIOL-VILLARD
69f6a27bf4 Atmel: move console default platform_device to serial driver
This variable spread on every SoC that is using the atmel_serial.c
driver can be included directly into the latter.

This will allow to compile multiple soc in the same kernel.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: kernel@avr32linux.org
2012-02-23 14:57:59 +01:00