Commit Graph

137 Commits

Author SHA1 Message Date
Ian Campbell
a2d771c036 xen: correct size of level2_kernel_pgt
sizeof(pmd_t *) is 4 bytes on 32-bit PAE leading to an allocation of
only 2048 bytes. The correct size is sizeof(pmd_t) giving us a full
page allocation.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-29 12:23:57 -07:00
Linus Torvalds
18cb657ca1 Merge branch 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm

* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: register xen pci notifier
  xen: initialize cpu masks for pv guests in xen_smp_init
  xen: add a missing #include to arch/x86/pci/xen.c
  xen: mask the MTRR feature from the cpuid
  xen: make hvc_xen console work for dom0.
  xen: add the direct mapping area for ISA bus access
  xen: Initialize xenbus for dom0.
  xen: use vcpu_ops to setup cpu masks
  xen: map a dummy page for local apic and ioapic in xen_set_fixmap
  xen: remap MSIs into pirqs when running as initial domain
  xen: remap GSIs as pirqs when running as initial domain
  xen: introduce XEN_DOM0 as a silent option
  xen: map MSIs into pirqs
  xen: support GSI -> pirq remapping in PV on HVM guests
  xen: add xen hvm acpi_register_gsi variant
  acpi: use indirect call to register gsi in different modes
  xen: implement xen_hvm_register_pirq
  xen: get the maximum number of pirqs from xen
  xen: support pirq != irq

* 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits)
  X86/PCI: Remove the dependency on isapnp_disable.
  xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c
  MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright.
  x86: xen: Sanitse irq handling (part two)
  swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.
  MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer.
  xen/pci: Request ACS when Xen-SWIOTLB is activated.
  xen-pcifront: Xen PCI frontend driver.
  xenbus: prevent warnings on unhandled enumeration values
  xenbus: Xen paravirtualised PCI hotplug support.
  xen/x86/PCI: Add support for the Xen PCI subsystem
  x86: Introduce x86_msi_ops
  msi: Introduce default_[teardown|setup]_msi_irqs with fallback.
  x86/PCI: Export pci_walk_bus function.
  x86/PCI: make sure _PAGE_IOMAP it set on pci mappings
  x86/PCI: Clean up pci_cache_line_size
  xen: fix shared irq device passthrough
  xen: Provide a variant of xen_poll_irq with timeout.
  xen: Find an unbound irq number in reverse order (high to low).
  xen: statically initialize cpu_evtchn_mask_p
  ...

Fix up trivial conflicts in drivers/pci/Makefile
2010-10-28 17:11:17 -07:00
Linus Torvalds
520045db94 Merge branches 'upstream/xenfs' and 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'upstream/xenfs' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen/privcmd: make privcmd visible in domU
  xen/privcmd: move remap_domain_mfn_range() to core xen code and export.
  privcmd: MMAPBATCH: Fix error handling/reporting
  xenbus: export xen_store_interface for xenfs
  xen/privcmd: make sure vma is ours before doing anything to it
  xen/privcmd: print SIGBUS faults
  xen/xenfs: set_page_dirty is supposed to return true if it dirties
  xen/privcmd: create address space to allow writable mmaps
  xen: add privcmd driver
  xen: add variable hypercall caller
  xen: add xen_set_domain_pte()
  xen: add /proc/xen/xsd_{kva,port} to xenfs

* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (29 commits)
  xen: include xen/xen.h for definition of xen_initial_domain()
  xen: use host E820 map for dom0
  xen: correctly rebuild mfn list list after migration.
  xen: improvements to VIRQ_DEBUG output
  xen: set up IRQ before binding virq to evtchn
  xen: ensure that all event channels start off bound to VCPU 0
  xen/hvc: only notify if we actually sent something
  xen: don't add extra_pages for RAM after mem_end
  xen: add support for PAT
  xen: make sure xen_max_p2m_pfn is up to date
  xen: limit extra memory to a certain ratio of base
  xen: add extra pages for E820 RAM regions, even if beyond mem_end
  xen: make sure xen_extra_mem_start is beyond all non-RAM e820
  xen: implement "extra" memory to reserve space for pages not present at boot
  xen: Use host-provided E820 map
  xen: don't map missing memory
  xen: defer building p2m mfn structures until kernel is mapped
  xen: add return value to set_phys_to_machine()
  xen: convert p2m to a 3 level tree
  xen: make install_p2mtop_page() static
  ...

Fix up trivial conflict in arch/x86/xen/mmu.c, and fix the use of
'reserve_early()' - in the new memblock world order it is now
'memblock_x86_reserve_range()' instead. Pointed out by Jeremy.
2010-10-26 18:20:19 -07:00
Juan Quintela
4ec5387cc3 xen: add the direct mapping area for ISA bus access
add the direct mapping area for ISA bus access when running as initial
domain

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:47 +01:00
Jeremy Fitzhardinge
98511f3532 xen: map a dummy page for local apic and ioapic in xen_set_fixmap
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:44 +01:00
Ian Campbell
375b2a9ada xen: correctly rebuild mfn list list after migration.
Otherwise the second migration attempt fails because the mfn_list_list
still refers to all the old mfns.

We need to update the entires in both p2m_top_mfn and the mid_mfn
pages which p2m_top_mfn refers to.

In order to do this we need to keep track of the virtual addresses
mapping the p2m_mid_mfn pages since we cannot rely on
mfn_to_virt(p2m_top_mfn[idx]) since p2m_top_mfn[idx] will still
contain the old MFN after a migration, which may now belong to another
domain and hence have a different mapping in the m2p.

Therefore add and maintain a third top level page, p2m_top_mfn_p[],
which tracks the virtual addresses of the mfns contained in
p2m_top_mfn[].

We also need to update the content of the p2m_mid_missing_mfn page on
resume to refer to the page's new mfn.

p2m_missing does not need updating since the migration process takes
care of the leaf p2m pages for us.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:36 -07:00
Jeremy Fitzhardinge
41f2e4771a xen: add support for PAT
Convert Linux PAT entries into Xen ones when constructing ptes.  Linux
doesn't use _PAGE_PAT for ptes, so the only difference in the first 4
entries is that Linux uses _PAGE_PWT for WC, whereas Xen (and default)
use it for WT.

xen_pte_val does the inverse conversion.

We hard-code assumptions about Linux's current PAT layout, but a
warning on the wrmsr to MSR_IA32_CR_PAT should point out any problems.
If necessary we could go to a more general table-based conversion between
Linux and Xen PAT entries.

hugetlbfs poses a problem at the moment, the x86 architecture uses the
same flag for _PAGE_PAT and _PAGE_PSE, which changes meaning depending
on which pagetable level we're using.  At the moment this should be OK
so long as nobody tries to do a pte_val on a hugetlbfs pte.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:31 -07:00
Jeremy Fitzhardinge
2f7acb2085 xen: make sure xen_max_p2m_pfn is up to date
Keep xen_max_p2m_pfn up to date with the end of the extra memory
we're adding.  It is possible that it will be too high since memory
may be truncated by a "mem=" option on the kernel command line, but
that won't matter.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:30 -07:00
Jeremy Fitzhardinge
cfd8951e08 xen: don't map missing memory
When setting up a pte for a missing pfn (no matching mfn), just create
an empty pte rather than a junk mapping.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:26 -07:00
Jeremy Fitzhardinge
33a847502b xen: defer building p2m mfn structures until kernel is mapped
When building mfn parts of p2m structure, we rely on being able to
use mfn_to_virt, which in turn requires kernel to be mapped into
the linear area (which is distinct from the kernel image mapping
on 64-bit).  Defer calling xen_build_mfn_list_list() until after
xen_setup_kernel_pagetable();

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:25 -07:00
Jeremy Fitzhardinge
c3798062f1 xen: add return value to set_phys_to_machine()
set_phys_to_machine() can return false on failure, which means a memory
allocation failure for the p2m structure.  It can only fail if setting
the mfn for a pfn in previously unused address space.  It is guaranteed
to succeed if you're setting a mapping to INVALID_P2M_ENTRY or updating
the mfn for an existing pfn.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:25 -07:00
Jeremy Fitzhardinge
58e05027b5 xen: convert p2m to a 3 level tree
Make the p2m structure a 3 level tree which covers the full possible
physical space.

The p2m structure contains mappings from the domain's pfns to system-wide
mfns.  The structure has 3 levels and two roots.  The first root is for
the domain's own use, and is linked with virtual addresses.  The second
is all mfn references, and is used by Xen on save/restore to allow it to
update the p2m mapping for the domain.

At boot, the domain builder provides a simple flat p2m array for all the
initially present pages.  We construct the two levels above that using
the early_brk allocator.  After early boot time, set_phys_to_machine()
will allocate any missing levels using the normal kernel allocator
(at GFP_KERNEL, so it must be called in a normal blocking context).

Because the early_brk() API requires us to pre-reserve the maximum amount
of memory we could allocate, there is still a CONFIG_XEN_MAX_DOMAIN_MEMORY
config option, but its only negative side-effect is to increase the
kernel's apparent bss size.  However, since all unused brk memory is
returned to the heap, there's no real downside to making it large.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:24 -07:00
Jeremy Fitzhardinge
bbbf61eff9 xen: make install_p2mtop_page() static
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:23 -07:00
Jeremy Fitzhardinge
1f2d9dd309 xen: set the actual extent of the mfn_list_list
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:23 -07:00
Jeremy Fitzhardinge
b7eb4ad391 xen: set shared_info->arch.max_pfn to max_p2m_pfn
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:22 -07:00
Jeremy Fitzhardinge
764f0138b9 xen: allocate level1_ident_pgt
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:20 -07:00
Jeremy Fitzhardinge
f0991802bb xen: use early_brk for level2_kernel_pgt
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:19 -07:00
Jeremy Fitzhardinge
a2e8752987 xen: allocate p2m size based on actual max size
Allocate p2m tables based on the actual runtime maximum pfn rather than
the static config-time limit.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:19 -07:00
Jeremy Fitzhardinge
a171ce6e7b xen: dynamically allocate p2m space
Use early brk mechanism to allocate p2m tables, to save memory when
booting non-Xen.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:18 -07:00
Linus Torvalds
3044100e58 Merge branch 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits)
  x86-64: Only set max_pfn_mapped to 512 MiB if we enter via head_64.S
  xen: Cope with unmapped pages when initializing kernel pagetable
  memblock, bootmem: Round pfn properly for memory and reserved regions
  memblock: Annotate memblock functions with __init_memblock
  memblock: Allow memblock_init to be called early
  memblock/arm: Fix memblock_region_is_memory() typo
  x86, memblock: Remove __memblock_x86_find_in_range_size()
  memblock: Fix wraparound in find_region()
  x86-32, memblock: Make add_highpages honor early reserved ranges
  x86, memblock: Fix crashkernel allocation
  arm, memblock: Fix the sparsemem build
  memblock: Fix section mismatch warnings
  powerpc, memblock: Fix memblock API change fallout
  memblock, microblaze: Fix memblock API change fallout
  x86: Remove old bootmem code
  x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve
  x86: Remove not used early_res code
  x86, memblock: Replace e820_/_early string with memblock_
  x86: Use memblock to replace early_res
  x86, memblock: Use memblock_debug to control debug message print out
  ...

Fix up trivial conflicts in arch/x86/kernel/setup.c and kernel/Makefile
2010-10-21 18:52:11 -07:00
Ian Campbell
de1ef2065c xen/privcmd: move remap_domain_mfn_range() to core xen code and export.
This allows xenfs to be built as a module, previously it required flush_tlb_all
and arbitrary_virt_to_machine to be exported.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:34 -07:00
Jeremy Fitzhardinge
eba3ff8b99 xen: add xen_set_domain_pte()
Add xen_set_domain_pte() to allow setting a pte mapping a page from
another domain.  The common case is to map from DOMID_IO, the pseudo
domain which owns all IO pages, but will also be used in the privcmd
interface to map other domain pages.

[ Impact: new Xen-internal API for cross-domain mappings ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:27 -07:00
Jeremy Fitzhardinge
fef5ba7979 xen: Cope with unmapped pages when initializing kernel pagetable
Xen requires that all pages containing pagetable entries to be mapped
read-only.  If pages used for the initial pagetable are already mapped
then we can change the mapping to RO.  However, if they are initially
unmapped, we need to make sure that when they are later mapped, they
are also mapped RO.

We do this by knowing that the kernel pagetable memory is pre-allocated
in the range e820_table_start - e820_table_end, so any pfn within this
range should be mapped read-only.  However, the pagetable setup code
early_ioremaps the pages to write their entries, so we must make sure
that mappings created in the early_ioremap fixmap area are mapped RW.
(Those mappings are removed before the pages are presented to Xen
as pagetable pages.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
LKML-Reference: <4CB63A80.8060702@goop.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-13 16:07:13 -07:00
Ingo Molnar
daab7fc734 Merge commit 'v2.6.36-rc3' into x86/memblock
Conflicts:
	arch/x86/kernel/trampoline.c
	mm/memblock.c

Merge reason: Resolve the conflicts, update to latest upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-31 09:45:46 +02:00
Yinghai Lu
a9ce6bc151 x86, memblock: Replace e820_/_early string with memblock_
1.include linux/memblock.h directly. so later could reduce e820.h reference.
2 this patch is done by sed scripts mainly

-v2: use MEMBLOCK_ERROR instead of -1ULL or -1UL

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:13:47 -07:00
Alok Kataria
b0f4c062fb x86, paravirt: Remove alloc_pmd_clone hook, only used by VMI
VMI was the only user of the alloc_pmd_clone hook, given that VMI
is now removed we can also remove this hook.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
LKML-Reference: <1282608357.19396.36.camel@ank32.eng.vmware.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-23 17:09:44 -07:00
Linus Torvalds
26f0cf9181 Merge branch 'stable/xen-swiotlb-0.8.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/xen-swiotlb-0.8.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  x86: Detect whether we should use Xen SWIOTLB.
  pci-swiotlb-xen: Add glue code to setup dma_ops utilizing xen_swiotlb_* functions.
  swiotlb-xen: SWIOTLB library for Xen PV guest with PCI passthrough.
  xen/mmu: inhibit vmap aliases rather than trying to clear them out
  vmap: add flag to allow lazy unmap to be disabled at runtime
  xen: Add xen_create_contiguous_region
  xen: Rename the balloon lock
  xen: Allow unprivileged Xen domains to create iomap pages
  xen: use _PAGE_IOMAP in ioremap to do machine mappings

Fix up trivial conflicts (adding both xen swiotlb and xen pci platform
driver setup close to each other) in drivers/xen/{Kconfig,Makefile} and
include/xen/xen-ops.h
2010-08-12 09:09:41 -07:00
Stefano Stabellini
ca65f9fc0c Introduce CONFIG_XEN_PVHVM compile option
This patch introduce a CONFIG_XEN_PVHVM compile time option to
enable/disable Xen PV on HVM support.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-07-29 11:11:33 -07:00
Jeremy Fitzhardinge
d2cb214551 xen/mmu: inhibit vmap aliases rather than trying to clear them out
Rather than trying to deal with aliases once they appear, just completely
inhibit them.  Mostly the removal of aliases was managable, but it comes
unstuck in xen_create_contiguous_region() because it gets executed at
interrupt time (as a result of dma_alloc_coherent()), which causes all
sorts of confusion in the vmap code, as it was never intended to be run
in interrupt context.

This has the unfortunate side effect of removing all the unmap batching
the vmap code so carefully added, but that can't be helped.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-07-27 11:50:41 -04:00
Stefano Stabellini
5915100106 x86: Call HVMOP_pagetable_dying on exit_mmap.
When a pagetable is about to be destroyed, we notify Xen so that the
hypervisor can clear the related shadow pagetable.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-07-26 23:13:26 -07:00
Alex Nixon
08bbc9da92 xen: Add xen_create_contiguous_region
A memory region must be physically contiguous in order to be accessed
through DMA.  This patch adds xen_create_contiguous_region, which
ensures a region of contiguous virtual memory is also physically
contiguous.

Based on Stephen Tweedie's port of the 2.6.18-xen version.

Remove contiguous_bitmap[] as it's no longer needed.

Ported from linux-2.6.18-xen.hg 707:e410857fd83c

[ Impact: add Xen-internal API to make pages phys-contig ]

Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-06-07 15:37:53 -04:00
Alex Nixon
19001c8c5b xen: Rename the balloon lock
* xen_create_contiguous_region needs access to the balloon lock to
  ensure memory doesn't change under its feet, so expose the balloon
  lock
* Change the name of the lock to xen_reservation_lock, to imply it's
  now less-specific usage.

[ Impact: cleanup ]

Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-06-07 14:34:07 -04:00
Alex Nixon
7347b4082e xen: Allow unprivileged Xen domains to create iomap pages
PV DomU domains are allowed to map hardware MFNs for PCI passthrough,
but are not generally allowed to map raw machine pages.  In particular,
various pieces of code try to map DMI and ACPI tables in the ISA ROM
range.  We disallow _PAGE_IOMAP for those mappings, so that they are
redirected to a set of local zeroed pages we reserve for that purpose.

[ Impact: prevent passthrough of ISA space, as we only allow PCI ]

Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-06-07 14:33:13 -04:00
Jeremy Fitzhardinge
c0011dbfce xen: use _PAGE_IOMAP in ioremap to do machine mappings
In a Xen domain, ioremap operates on machine addresses, not
pseudo-physical addresses.  We use _PAGE_IOMAP to determine whether a
mapping is intended for machine addresses.

[ Impact: allow Xen domain to map real hardware ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-06-07 14:32:33 -04:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Ian Campbell
dad52fc011 x86, paravirt: Remove kmap_atomic_pte paravirt op.
Now that both Xen and VMI disable allocations of PTE pages from high
memory this paravirt op serves no further purpose.

This effectively reverts ce6234b5 "add kmap_atomic_pte for mapping
highpte pages".

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
LKML-Reference: <1267204562-11844-3-git-send-email-ian.campbell@citrix.com>
Acked-by: Alok Kataria <akataria@vmware.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-27 14:41:35 -08:00
Ian Campbell
817a824b75 x86, xen: Disable highmem PTE allocation even when CONFIG_HIGHPTE=y
There's a path in the pagefault code where the kernel deliberately
breaks its own locking rules by kmapping a high pte page without
holding the pagetable lock (in at least page_check_address). This
breaks Xen's ability to track the pinned/unpinned state of the
page. There does not appear to be a viable workaround for this
behaviour so simply disable HIGHPTE for all Xen guests.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
LKML-Reference: <1267204562-11844-1-git-send-email-ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pasi Kärkkäinen <pasik@iki.fi>
Cc: <stable@kernel.org> # .32.x: 14315592: Allow highmem user page tables to be disabled at boot time
Cc: <stable@kernel.org> # .32.x
Cc: <xen-devel@lists.xensource.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-27 14:41:01 -08:00
Ian Campbell
fa24ba62ea xen: correctly restore pfn_to_mfn_list_list after resume
pvops kernels >= 2.6.30 can currently only be saved and restored once. The
second attempt to save results in:

    ERROR Internal error: Frame# in pfn-to-mfn frame list is not in pseudophys
    ERROR Internal error: entry 0: p2m_frame_list[0] is 0xf2c2c2c2, max 0x120000
    ERROR Internal error: Failed to map/save the p2m frame list

I finally narrowed it down to:

    commit cdaead6b4e
        Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
        Date:   Fri Feb 27 15:34:59 2009 -0800

            xen: split construction of p2m mfn tables from registration

            Build the p2m_mfn_list_list early with the rest of the p2m table, but
            register it later when the real shared_info structure is in place.

            Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

The unforeseen side-effect of this change was to cause the mfn list list to not
be rebuilt on resume. Prior to this change it would have been rebuilt via
xen_post_suspend() -> xen_setup_shared_info() -> xen_setup_mfn_list_list().

Fix by explicitly calling xen_build_mfn_list_list() from xen_post_suspend().

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
2009-12-03 11:14:51 -08:00
Rusty Russell
78f1c4d6b0 cpumask: use mm_cpumask() wrapper: x86
Makes code futureproof against the impending change to mm->cpu_vm_mask (to be a pointer).

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-09-24 09:34:52 +09:30
Thomas Gleixner
f1d7062a23 x86: Move xen_post_allocator_init into xen_pagetable_setup_done
We really do not need two paravirt/x86_init_ops functions which are
called in two consecutive source lines. Move the only user of
post_allocator_init into the already existing pagetable_setup_done
function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31 09:35:45 +02:00
Thomas Gleixner
030cb6c00d x86: Move paravirt pagetable_setup to x86_init_ops
Replace more paravirt hackery by proper x86_init_ops.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31 09:35:45 +02:00
Linus Torvalds
be15f9d63b Merge branch 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (42 commits)
  xen: cache cr0 value to avoid trap'n'emulate for read_cr0
  xen/x86-64: clean up warnings about IST-using traps
  xen/x86-64: fix breakpoints and hardware watchpoints
  xen: reserve Xen start_info rather than e820 reserving
  xen: add FIX_TEXT_POKE to fixmap
  lguest: update lazy mmu changes to match lguest's use of kvm hypercalls
  xen: honour VCPU availability on boot
  xen: add "capabilities" file
  xen: drop kexec bits from /sys/hypervisor since kexec isn't implemented yet
  xen/sys/hypervisor: change writable_pt to features
  xen: add /sys/hypervisor support
  xen/xenbus: export xenbus_dev_changed
  xen: use device model for suspending xenbus devices
  xen: remove suspend_cancel hook
  xen/dev-evtchn: clean up locking in evtchn
  xen: export ioctl headers to userspace
  xen: add /dev/xen/evtchn driver
  xen: add irq_from_evtchn
  xen: clean up gate trap/interrupt constants
  xen: set _PAGE_NX in __supported_pte_mask before pagetable construction
  ...
2009-06-10 16:16:27 -07:00
Randy Dunlap
44408ad736 xen: use header for EXPORT_SYMBOL_GPL
mmu.c needs to #include module.h to prevent these warnings:

 arch/x86/xen/mmu.c:239: warning: data definition has no type or storage class
 arch/x86/xen/mmu.c:239: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
 arch/x86/xen/mmu.c:239: warning: parameter names (without types) in function declaration

[ Impact: cleanup ]

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-13 15:43:55 +02:00
Ingo Molnar
f066a15533 Merge branch 'x86/urgent' into x86/xen
Conflicts:
	arch/frv/include/asm/pgtable.h
	arch/x86/include/asm/required-features.h
	arch/x86/xen/mmu.c

Merge reason: x86/xen was on a .29 base still, move it to a fresher
              branch and pick up Xen fixes as well, plus resolve
              conflicts

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-08 10:50:00 +02:00
Jeremy Fitzhardinge
33df4db04a x86: xen, i386: reserve Xen pagetables
The Xen pagetables are no longer implicitly reserved as part of the other
i386_start_kernel reservations, so make sure we explicitly reserve them.
This prevents them from being released into the general kernel free page
pool and reused.

[ Impact: fix Xen guest crash ]

Also-Bisected-by: Bryan Donlan <bdonlan@gmail.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4A032EEC.30509@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-08 10:49:11 +02:00
Linus Torvalds
2e1c63b7ed Merge branch 'for-rc1/xen/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'for-rc1/xen/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: add FIX_TEXT_POKE to fixmap
  xen: honour VCPU availability on boot
  xen: clean up gate trap/interrupt constants
  xen: set _PAGE_NX in __supported_pte_mask before pagetable construction
  xen: resume interrupts before system devices.
  xen/mmu: weaken flush_tlb_other test
  xen/mmu: some early pagetable cleanups
  Xen: Add virt_to_pfn helper function
  x86-64: remove PGE from must-have feature list
  xen: mask XSAVE from cpuid
  NULL noise: arch/x86/xen/smp.c
  xen: remove xen_load_gdt debug
  xen: make xen_load_gdt simpler
  xen: clean up xen_load_gdt
  xen: split construction of p2m mfn tables from registration
  xen: separate p2m allocation from setting
  xen: disable preempt for leave_lazy_mmu
2009-04-13 15:30:20 -07:00
Masami Hiramatsu
3b3809ac53 x86: fix set_fixmap to use phys_addr_t
Use phys_addr_t for receiving a physical address argument instead of
unsigned long.  This allows fixmap to handle pages higher than 4GB on
x86-32.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-09 16:41:45 -07:00
Jeremy Fitzhardinge
e7c0648896 xen: add FIX_TEXT_POKE to fixmap
FIX_TEXT_POKE[01] are used to map kernel addresses, so they're mapping
pfns, not mfns.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-09 15:44:58 -07:00
Jeremy Fitzhardinge
3ecb1b7df9 xen: add FIX_TEXT_POKE to fixmap
FIX_TEXT_POKE[01] are used to map kernel addresses, so they're mapping
pfns, not mfns.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08 17:57:19 -07:00
Jeremy Fitzhardinge
e3f8a74e3a xen/mmu: weaken flush_tlb_other test
Impact: fixes crashing bug

There's no particular problem with getting an empty cpu mask,
so just shortcut-return if we get one.

Avoids crash reported by Christophe Saout <christophe@saout.de>

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08 14:25:46 -07:00