Commit Graph

216 Commits

Author SHA1 Message Date
Jakub Kicinski
55fd59b003 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts:
	drivers/net/ethernet/ibm/ibmvnic.c

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 15:44:09 -08:00
Antoine Tenart
832ba59649 net: ip6_gre: set dev->hard_header_len when using header_ops
syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:

  skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33
  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:109!
  Call Trace:
  skb_push+0x10/0x10
  ip6gre_header+0x47/0x1b0
  neigh_connected_output+0xae/0xf0

ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.

Fixes: eb95f52fc7 ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap")
Cc: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02 11:16:12 -08:00
Heiner Kallweit
98d7fc4638 ipv4/ipv6: switch to dev_get_tstats64
Replace ip_tunnel_get_stats64() with the new identical core function
dev_get_tstats64().

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-09 17:50:28 -08:00
Davide Caratti
e5f7e211b6 ip6gre: avoid tx_error when sending MLD/DAD on external tunnels
similarly to what has been done with commit 9d149045b3 ("geneve: change
from tx_error to tx_dropped on missing metadata"), avoid reporting errors
to userspace in case the kernel doesn't find any tunnel information for a
skb that is going to be transmitted: an increase of tx_dropped is enough.

tested with the following script:

 # for t in ip6gre ip6gretap ip6erspan; do
 > ip link add dev gre6-test0 type $t external
 > ip address add dev gre6-test0 2001:db8::1/64
 > ip link set dev gre6-test0 up
 > sleep 30
 > ip -s -j link show dev gre6-test0 | jq \
 > '.[0].stats64.tx | {"errors": .errors, "dropped": .dropped}'
 > ip link del dev gre6-test0
 > done

Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28 16:01:37 -07:00
Wei Yongjun
46ef5b89ec ip6_gre: fix null-ptr-deref in ip6gre_init_net()
KASAN report null-ptr-deref error when register_netdev() failed:

KASAN: null-ptr-deref in range [0x00000000000003c0-0x00000000000003c7]
CPU: 2 PID: 422 Comm: ip Not tainted 5.8.0-rc4+ #12
Call Trace:
 ip6gre_init_net+0x4ab/0x580
 ? ip6gre_tunnel_uninit+0x3f0/0x3f0
 ops_init+0xa8/0x3c0
 setup_net+0x2de/0x7e0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? ops_init+0x3c0/0x3c0
 ? kasan_unpoison_shadow+0x33/0x40
 ? __kasan_kmalloc.constprop.0+0xc2/0xd0
 copy_net_ns+0x27d/0x530
 create_new_namespaces+0x382/0xa30
 unshare_nsproxy_namespaces+0xa1/0x1d0
 ksys_unshare+0x39c/0x780
 ? walk_process_tree+0x2a0/0x2a0
 ? trace_hardirqs_on+0x4a/0x1b0
 ? _raw_spin_unlock_irq+0x1f/0x30
 ? syscall_trace_enter+0x1a7/0x330
 ? do_syscall_64+0x1c/0xa0
 __x64_sys_unshare+0x2d/0x40
 do_syscall_64+0x56/0xa0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later
access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving
'ign->fb_tunnel_dev' to local variable ndev.

Fixes: dafabb6590 ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 17:32:17 -07:00
Taehee Yoo
dafabb6590 ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()
In the datapath, the ip6gre_tunnel_lookup() is used and it internally uses
fallback tunnel device pointer, which is fb_tunnel_dev.
This pointer variable should be set to NULL when a fb interface is deleted.
But there is no routine to set fb_tunnel_dev pointer to NULL.
So, this pointer will be still used after interface is deleted and
it eventually results in the use-after-free problem.

Test commands:
    ip netns add A
    ip netns add B
    ip link add eth0 type veth peer name eth1
    ip link set eth0 netns A
    ip link set eth1 netns B

    ip netns exec A ip link set lo up
    ip netns exec A ip link set eth0 up
    ip netns exec A ip link add ip6gre1 type ip6gre local fc:0::1 \
	    remote fc:0::2
    ip netns exec A ip -6 a a fc💯:1/64 dev ip6gre1
    ip netns exec A ip link set ip6gre1 up
    ip netns exec A ip -6 a a fc:0::1/64 dev eth0
    ip netns exec A ip link set ip6gre0 up

    ip netns exec B ip link set lo up
    ip netns exec B ip link set eth1 up
    ip netns exec B ip link add ip6gre1 type ip6gre local fc:0::2 \
	    remote fc:0::1
    ip netns exec B ip -6 a a fc💯:2/64 dev ip6gre1
    ip netns exec B ip link set ip6gre1 up
    ip netns exec B ip -6 a a fc:0::2/64 dev eth1
    ip netns exec B ip link set ip6gre0 up
    ip netns exec A ping fc💯:2 -s 60000 &
    ip netns del B

Splat looks like:
[   73.087285][    C1] BUG: KASAN: use-after-free in ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.088361][    C1] Read of size 4 at addr ffff888040559218 by task ping/1429
[   73.089317][    C1]
[   73.089638][    C1] CPU: 1 PID: 1429 Comm: ping Not tainted 5.7.0+ #602
[   73.090531][    C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   73.091725][    C1] Call Trace:
[   73.092160][    C1]  <IRQ>
[   73.092556][    C1]  dump_stack+0x96/0xdb
[   73.093122][    C1]  print_address_description.constprop.6+0x2cc/0x450
[   73.094016][    C1]  ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.094894][    C1]  ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.095767][    C1]  ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.096619][    C1]  kasan_report+0x154/0x190
[   73.097209][    C1]  ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.097989][    C1]  ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.098750][    C1]  ? gre_del_protocol+0x60/0x60 [gre]
[   73.099500][    C1]  gre_rcv+0x1c5/0x1450 [ip6_gre]
[   73.100199][    C1]  ? ip6gre_header+0xf00/0xf00 [ip6_gre]
[   73.100985][    C1]  ? rcu_read_lock_sched_held+0xc0/0xc0
[   73.101830][    C1]  ? ip6_input_finish+0x5/0xf0
[   73.102483][    C1]  ip6_protocol_deliver_rcu+0xcbb/0x1510
[   73.103296][    C1]  ip6_input_finish+0x5b/0xf0
[   73.103920][    C1]  ip6_input+0xcd/0x2c0
[   73.104473][    C1]  ? ip6_input_finish+0xf0/0xf0
[   73.105115][    C1]  ? rcu_read_lock_held+0x90/0xa0
[   73.105783][    C1]  ? rcu_read_lock_sched_held+0xc0/0xc0
[   73.106548][    C1]  ipv6_rcv+0x1f1/0x300
[ ... ]

Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18 20:12:33 -07:00
Kees Cook
46d30cb104 net: ip6_gre: Distribute switch variables for initialization
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.

net/ipv6/ip6_gre.c: In function ‘ip6gre_err’:
net/ipv6/ip6_gre.c:440:32: warning: statement will never be executed [-Wswitch-unreachable]
  440 |   struct ipv6_tlv_tnl_enc_lim *tel;
      |                                ^~~

net/ipv6/ip6_tunnel.c: In function ‘ip6_tnl_err’:
net/ipv6/ip6_tunnel.c:520:32: warning: statement will never be executed [-Wswitch-unreachable]
  520 |   struct ipv6_tlv_tnl_enc_lim *tel;
      |                                ^~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20 10:00:19 -08:00
Niko Kortstrom
690afc165b net: ip6_gre: fix moving ip6gre between namespaces
Support for moving IPv4 GRE tunnels between namespaces was added in
commit b57708add3 ("gre: add x-netns support"). The respective change
for IPv6 tunnels, commit 22f08069e8 ("ip6gre: add x-netns support")
did not drop NETIF_F_NETNS_LOCAL flag so moving them from one netns to
another is still denied in IPv6 case. Drop NETIF_F_NETNS_LOCAL flag from
ip6gre tunnels to allow moving ip6gre tunnel endpoints between network
namespaces.

Signed-off-by: Niko Kortstrom <niko.kortstrom@nokia.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20 09:59:24 +01:00
Hangbin Liu
675d76ad0a ip6_gre: do not confirm neighbor when do pmtu update
When we do ipv6 gre pmtu update, we will also do neigh confirm currently.
This will cause the neigh cache be refreshed and set to REACHABLE before
xmit.

But if the remote mac address changed, e.g. device is deleted and recreated,
we will not able to notice this and still use the old mac address as the neigh
cache is REACHABLE.

Fix this by disable neigh confirm when do pmtu update

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
    dst_ops.update_pmtu to control whether we should do neighbor confirm.
    Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Reported-by: Jianlin Shi <jishi@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24 22:28:54 -08:00
Hangbin Liu
bd085ef678 net: add bool confirm_neigh parameter for dst_ops.update_pmtu
The MTU update code is supposed to be invoked in response to real
networking events that update the PMTU. In IPv6 PMTU update function
__ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor
confirmed time.

But for tunnel code, it will call pmtu before xmit, like:
  - tnl_update_pmtu()
    - skb_dst_update_pmtu()
      - ip6_rt_update_pmtu()
        - __ip6_rt_update_pmtu()
          - dst_confirm_neigh()

If the tunnel remote dst mac address changed and we still do the neigh
confirm, we will not be able to update neigh cache and ping6 remote
will failed.

So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we
should not be invoking dst_confirm_neigh() as we have no evidence
of successful two-way communication at this point.

On the other hand it is also important to keep the neigh reachability fresh
for TCP flows, so we cannot remove this dst_confirm_neigh() call.

To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu
to choose whether we should do neigh update or not. I will add the parameter
in this patch and set all the callers to true to comply with the previous
way, and fix the tunnel code one by one on later patches.

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
    dst_ops.update_pmtu to control whether we should do neighbor confirm.
    Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Suggested-by: David Miller <davem@davemloft.net>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24 22:28:54 -08:00
Pankaj Bharadiya
c593642c8b treewide: Use sizeof_field() macro
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().

This patch is generated using following script:

EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"

git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do

	if [[ "$file" =~ $EXCLUDE_FILES ]]; then
		continue
	fi
	sed -i  -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-09 10:36:44 -08:00
Xin Long
2eb8d6d291 erspan: fix the tun_info options_len check for erspan
The check for !md doens't really work for ip_tunnel_info_opts(info) which
only does info + 1. Also to avoid out-of-bounds access on info, it should
ensure options_len is not less than erspan_metadata in both erspan_xmit()
and ip6erspan_tunnel_xmit().

Fixes: 1a66a836da ("gre: add collect_md mode to ERSPAN tunnel")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29 17:36:42 -07:00
Haishuang Yan
4123f637a5 ip6erspan: remove the incorrect mtu limit for ip6erspan
ip6erspan driver calls ether_setup(), after commit 61e84623ac
("net: centralize net_device min/max MTU checking"), the range
of mtu is [min_mtu, max_mtu], which is [68, 1500] by default.

It causes the dev mtu of the erspan device to not be greater
than 1500, this limit value is not correct for ip6erspan tap
device.

Fixes: 61e84623ac ("net: centralize net_device min/max MTU checking")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08 19:46:42 -07:00
Xin Long
28e4860377 ip6_gre: fix a dst leak in ip6erspan_tunnel_xmit
In ip6erspan_tunnel_xmit(), if the skb will not be sent out, it has to
be freed on the tx_err path. Otherwise when deleting a netns, it would
cause dst/dev to leak, and dmesg shows:

  unregister_netdevice: waiting for lo to become free. Usage count = 1

Fixes: ef7baf5e08 ("ip6_gre: add ip6 erspan collect_md mode")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 09:08:18 +02:00
Haishuang Yan
3bc817d665 ip6_gre: reload ipv6h in prepare_ip6gre_xmit_ipv6
Since ip6_tnl_parse_tlv_enc_lim() can call pskb_may_pull()
which may change skb->data, so we need to re-load ipv6h at
the right place.

Fixes: 898b29798e ("ip6_gre: Refactor ip6gre xmit codes")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24 13:59:25 -07:00
Thomas Gleixner
2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Lorenzo Bianconi
2a3cabae45 net: ip6_gre: fix possible use-after-free in ip6erspan_rcv
erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove
erspan header. This can determine a possible use-after-free accessing
pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned'
running pskb_expand_head if it is a cloned gso skb (e.g if the packet has
been sent though a veth device). Fix it resetting pkt_md pointer after
__iptunnel_pull_header

Fixes: 1d7e2ed22f ("net: erspan: refactor existing erspan code")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08 16:16:47 -07:00
David S. Miller
70f3522614 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three conflicts, one of which, for marvell10g.c is non-trivial and
requires some follow-up from Heiner or someone else.

The issue is that Heiner converted the marvell10g driver over to
use the generic c45 code as much as possible.

However, in 'net' a bug fix appeared which makes sure that a new
local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0
is cleared.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24 12:06:19 -08:00
Lorenzo Bianconi
efcc9bcaf7 net: ip6_gre: fix possible NULL pointer dereference in ip6erspan_set_version
Fix a possible NULL pointer dereference in ip6erspan_set_version checking
nlattr data pointer

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 7549 Comm: syz-executor432 Not tainted 5.0.0-rc6-next-20190218
#37
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:ip6erspan_set_version+0x5c/0x350 net/ipv6/ip6_gre.c:1726
Code: 07 38 d0 7f 08 84 c0 0f 85 9f 02 00 00 49 8d bc 24 b0 00 00 00 c6 43
54 01 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f
85 9a 02 00 00 4d 8b ac 24 b0 00 00 00 4d 85 ed 0f
RSP: 0018:ffff888089ed7168 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff8880869d6e58 RCX: 0000000000000000
RDX: 0000000000000016 RSI: ffffffff862736b4 RDI: 00000000000000b0
RBP: ffff888089ed7180 R08: 1ffff11010d3adcb R09: ffff8880869d6e58
R10: ffffed1010d3add5 R11: ffff8880869d6eaf R12: 0000000000000000
R13: ffffffff8931f8c0 R14: ffffffff862825d0 R15: ffff8880869d6e58
FS:  0000000000b3d880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000184 CR3: 0000000092cc5000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  ip6erspan_newlink+0x66/0x7b0 net/ipv6/ip6_gre.c:2210
  __rtnl_newlink+0x107b/0x16c0 net/core/rtnetlink.c:3176
  rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3234
  rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192
  netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485
  rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210
  netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
  netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336
  netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925
  sock_sendmsg_nosec net/socket.c:621 [inline]
  sock_sendmsg+0xdd/0x130 net/socket.c:631
  ___sys_sendmsg+0x806/0x930 net/socket.c:2136
  __sys_sendmsg+0x105/0x1d0 net/socket.c:2174
  __do_sys_sendmsg net/socket.c:2183 [inline]
  __se_sys_sendmsg net/socket.c:2181 [inline]
  __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2181
  do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440159
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffa69156e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440159
RDX: 0000000000000000 RSI: 0000000020001340 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000001 R09: 00000000004002c8
R10: 0000000000000011 R11: 0000000000000246 R12: 00000000004019e0
R13: 0000000000401a70 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace 09f8a7d13b4faaa1 ]---
RIP: 0010:ip6erspan_set_version+0x5c/0x350 net/ipv6/ip6_gre.c:1726
Code: 07 38 d0 7f 08 84 c0 0f 85 9f 02 00 00 49 8d bc 24 b0 00 00 00 c6 43
54 01 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f
85 9a 02 00 00 4d 8b ac 24 b0 00 00 00 4d 85 ed 0f
RSP: 0018:ffff888089ed7168 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff8880869d6e58 RCX: 0000000000000000
RDX: 0000000000000016 RSI: ffffffff862736b4 RDI: 00000000000000b0
RBP: ffff888089ed7180 R08: 1ffff11010d3adcb R09: ffff8880869d6e58
R10: ffffed1010d3add5 R11: ffff8880869d6eaf R12: 0000000000000000
R13: ffffffff8931f8c0 R14: ffffffff862825d0 R15: ffff8880869d6e58
FS:  0000000000b3d880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000184 CR3: 0000000092cc5000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 4974d5f678 ("net: ip6_gre: initialize erspan_ver just for erspan tunnels")
Reported-and-tested-by: syzbot+30191cf1057abd3064af@syzkaller.appspotmail.com
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22 11:41:26 -08:00
Lorenzo Bianconi
103d0244d2 net: ip6_gre: do not report erspan_ver for ip6gre or ip6gretap
Report erspan version field to userspace in ip6gre_fill_info just for
erspan_v6 tunnels. Moreover report IFLA_GRE_ERSPAN_INDEX only for
erspan version 1.
The issue can be triggered with the following reproducer:

$ip link add name gre6 type ip6gre local 2001::1 remote 2002::2
$ip link set gre6 up
$ip -d link sh gre6
14: grep6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1448 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/gre6 2001::1 peer 2002::2 promiscuity 0 minmtu 0 maxmtu 0
    ip6gre remote 2002::2 local 2001::1 hoplimit 64 encaplimit 4 tclass 0x00 flowlabel 0x00000 erspan_index 0 erspan_ver 0 addrgenmode eui64

Fixes: 94d7d8f292 ("ip6_gre: add erspan v2 support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 16:02:10 -08:00
David S. Miller
375ca548f7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Two easily resolvable overlapping change conflicts, one in
TCP and one in the eBPF verifier.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 00:34:07 -08:00
Lorenzo Bianconi
4974d5f678 net: ip6_gre: initialize erspan_ver just for erspan tunnels
After commit c706863bc8 ("net: ip6_gre: always reports o_key to
userspace"), ip6gre and ip6gretap tunnels started reporting TUNNEL_KEY
output flag even if it is not configured.
ip6gre_fill_info checks erspan_ver value to add TUNNEL_KEY for
erspan tunnels, however in commit 84581bdae9 ("erspan: set
erspan_ver to 1 by default when adding an erspan dev")
erspan_ver is initialized to 1 even for ip6gre or ip6gretap
Fix the issue moving erspan_ver initialization in a dedicated routine

Fixes: c706863bc8 ("net: ip6_gre: always reports o_key to userspace")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15 20:14:25 -08:00
David S. Miller
a655fe9f19 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
An ipvlan bug fix in 'net' conflicted with the abstraction away
of the IPV6 specific support in 'net-next'.

Similarly, a bug fix for mlx5 in 'net' conflicted with the flow
action conversion in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08 15:00:17 -08:00
Lorenzo Bianconi
c706863bc8 net: ip6_gre: always reports o_key to userspace
As Erspan_v4, Erspan_v6 protocol relies on o_key to configure
session id header field. However TUNNEL_KEY bit is cleared in
ip6erspan_tunnel_xmit since ERSPAN protocol does not set the key field
of the external GRE header and so the configured o_key is not reported
to userspace. The issue can be triggered with the following reproducer:

$ip link add ip6erspan1 type ip6erspan local 2000::1 remote 2000::2 \
    key 1 seq erspan_ver 1
$ip link set ip6erspan1 up
ip -d link sh ip6erspan1

ip6erspan1@NONE: <BROADCAST,MULTICAST> mtu 1422 qdisc noop state DOWN mode DEFAULT
    link/ether ba:ff:09:24:c3:0e brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
    ip6erspan remote 2000::2 local 2000::1 encaplimit 4 flowlabel 0x00000 ikey 0.0.0.1 iseq oseq

Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in
ip6gre_fill_info

Fixes: 5a963eb61b ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30 14:00:02 -08:00
David S. Miller
1d68101367 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-01-27 10:43:17 -08:00
Lorenzo Bianconi
cb73ee40b1 net: ip_gre: use erspan key field for tunnel lookup
Use ERSPAN key header field as tunnel key in gre_parse_header routine
since ERSPAN protocol sets the key field of the external GRE header to
0 resulting in a tunnel lookup fail in ip6gre_err.
In addition remove key field parsing and pskb_may_pull check in
erspan_rcv and ip6erspan_rcv

Fixes: 5a963eb61b ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 11:52:17 -08:00
David S. Miller
fa7f3a8d56 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Completely minor snmp doc conflict.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:41:32 -08:00
Lorenzo Bianconi
a057fed33b net: ip6_gre: remove gre_hdr_len from ip6erspan_rcv
Remove gre_hdr_len from ip6erspan_rcv routine signature since
it is not longer used

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18 13:56:44 -08:00
Xin Long
20704bd163 erspan: build the header with the right proto according to erspan_ver
As said in draft-foschiano-erspan-03#section4:

   Different frame variants known as "ERSPAN Types" can be
   distinguished based on the GRE "Protocol Type" field value: Type I
   and II's value is 0x88BE while Type III's is 0x22EB [ETYPES].

So set it properly in erspan_xmit() according to erspan_ver. While at
it, also remove the unused parameter 'proto' in erspan_fb_xmit().

Fixes: 94d7d8f292 ("ip6_gre: add erspan v2 support")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16 13:36:43 -08:00
Hangbin Liu
80b3671e93 ip6_gre: update version related info when changing link
We forgot to update ip6erspan version related info when changing link,
which will cause setting new hwid failed.

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 94d7d8f292 ("ip6_gre: add erspan v2 support")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15 13:33:44 -08:00
Olivier Matz
ab5098fa25 ip6_gre: fix tunnel list corruption for x-netns
In changelink ops, the ip6gre_net pointer is retrieved from
dev_net(dev), which is wrong in case of x-netns. Thus, the tunnel is not
unlinked from its current list and is relinked into another net
namespace. This corrupts the tunnel lists and can later trigger a kernel
oops.

Fix this by retrieving the netns from device private area.

Fixes: c8632fc30b ("net: ip6_gre: Split up ip6gre_changelink()")
Cc: Petr Machata <petrm@mellanox.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15 13:33:44 -08:00
Willem de Bruijn
cb9f1b7838 ip: validate header length on virtual device xmit
KMSAN detected read beyond end of buffer in vti and sit devices when
passing truncated packets with PF_PACKET. The issue affects additional
ip tunnel devices.

Extend commit 76c0ddd8c3 ("ip6_tunnel: be careful when accessing the
inner header") and commit ccfec9e5cb ("ip_tunnel: be careful when
accessing the inner header").

Move the check to a separate helper and call at the start of each
ndo_start_xmit function in net/ipv4 and net/ipv6.

Minor changes:
- convert dev_kfree_skb to kfree_skb on error path,
  as dev_kfree_skb calls consume_skb which is not for error paths.
- use pskb_network_may_pull even though that is pedantic here,
  as the same as pskb_may_pull for devices without llheaders.
- do not cache ipv6 hdrs if used only once
  (unsafe across pskb_may_pull, was more relevant to earlier patch)

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 12:05:02 -08:00
Oz Shlomo
0621e6fc5e net: Add netif_is_gretap()/netif_is_ip6gretap()
Changed the is_gretap_dev and is_ip6gretap_dev logic from structure
comparison to string comparison of the rtnl_link_ops kind field.

This approach aligns with the current identification methods and function
names of vxlan and geneve network devices.

Convert mlxsw to use these helpers and use them in downstream mlx5 patch.

Signed-off-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-10 15:53:04 -08:00
Stefano Brivio
32bbd8793f net: Convert protocol error handlers from void to int
We'll need this to handle ICMP errors for tunnels without a sending socket
(i.e. FoU and GUE). There, we might have to look up different types of IP
tunnels, registered as network protocols, before we get a match, so we
want this for the error handlers of IPPROTO_IPIP and IPPROTO_IPV6 in both
inet_protos and inet6_protos. These error codes will be used in the next
patch.

For consistency, return sensible error codes in protocol error handlers
whenever handlers can't handle errors because, even if valid, they don't
match a protocol or any of its states.

This has no effect on existing error handling paths.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 17:13:08 -08:00
Haishuang Yan
a82738adff ip6_gre: simplify gre header parsing in ip6gre_err
Same as ip_gre, use gre_parse_header to parse gre header in gre error
handler code.

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-16 15:32:59 -07:00
Xin Long
84581bdae9 erspan: set erspan_ver to 1 by default when adding an erspan dev
After erspan_ver is introudced, if erspan_ver is not set in iproute, its
value will be left 0 by default. Since Commit 02f99df187 ("erspan: fix
invalid erspan version."), it has broken the traffic due to the version
check in erspan_xmit if users are not aware of 'erspan_ver' param, like
using an old version of iproute.

To fix this compatibility problem, it sets erspan_ver to 1 by default
when adding an erspan dev in erspan_setup. Note that we can't do it in
ipgre_netlink_parms, as this function is also used by ipgre_changelink.

Fixes: 02f99df187 ("erspan: fix invalid erspan version.")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-27 15:13:17 -07:00
Maria Pasechnik
eb95f52fc7 net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap
IPv6 GRO over GRE tap is not working while GRO is not set
over the native interface.

gro_list_prepare function updates the same_flow variable
of existing sessions to 1 if their mac headers match the one
of the incoming packet.
same_flow is used to filter out non-matching sessions and keep
potential ones for aggregation.

The number of bytes to compare should be the number of bytes
in the mac headers. In gro_list_prepare this number is set to
be skb->dev->hard_header_len. For GRE interfaces this hard_header_len
should be as it is set in the initialization process (when GRE is
created), it should not be overridden. But currently it is being overridden
by the value that is actually supposed to represent the needed_headroom.
Therefore, the number of bytes compared in order to decide whether the
the mac headers are the same is greater than the length of the headers.

As it's documented in netdevice.h, hard_header_len is the maximum
hardware header length, and needed_headroom is the extra headroom
the hardware may need.
hard_header_len is basically all the bytes received by the physical
till layer 3 header of the packet received by the interface.
For example, if the interface is a GRE tap then the needed_headroom
should be the total length of the following headers:
IP header of the physical, GRE header, mac header of GRE.
It is often used to calculate the MTU of the created interface.

This patch removes the override of the hard_header_len, and
assigns the calculated value to needed_headroom.
This way, the comparison in gro_list_prepare is really of
the mac headers, and if the packets have the same mac headers
the same_flow will be set to 1.

Performance testing: 45% higher bandwidth.
Measuring bandwidth of single-stream IPv4 TCP traffic over IPv6
GRE tap while GRO is not set on the native.
NIC: ConnectX-4LX
Before (GRO not working) : 7.2 Gbits/sec
After (GRO working): 10.5 Gbits/sec

Signed-off-by: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09 14:07:38 -07:00
David S. Miller
c4c5551df1 Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux
All conflicts were trivial overlapping changes, so reasonably
easy to resolve.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20 21:17:12 -07:00
Prashant Bhole
b7ed879425 net: ip6_gre: get ipv6hdr after skb_cow_head()
A KASAN:use-after-free bug was found related to ip6-erspan
while running selftests/net/ip6_gre_headroom.sh

It happens because of following sequence:
- ipv6hdr pointer is obtained from skb
- skb_cow_head() is called, skb->head memory is reallocated
- old data is accessed using ipv6hdr pointer

skb_cow_head() call was added in e41c7c68ea ("ip6erspan: make sure
enough headroom at xmit."), but looking at the history there was a
chance of similar bug because gre_handle_offloads() and pskb_trim()
can also reallocate skb->head memory. Fixes tag points to commit
which introduced possibility of this bug.

This patch moves ipv6hdr pointer assignment after skb_cow_head() call.

Fixes: 5a963eb61b ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16 13:39:47 -07:00
Pieter Jansen van Vuuren
256c87c17c net: check tunnel option type in tunnel flags
Check the tunnel option type stored in tunnel flags when creating options
for tunnels. Thereby ensuring we do not set geneve, vxlan or erspan tunnel
options on interfaces that are not associated with them.

Make sure all users of the infrastructure set correct flags, for the BPF
helper we have to set all bits to keep backward compatibility.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29 23:50:26 +09:00
David S. Miller
6f6e434aa2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.

TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.

The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.

Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21 16:01:54 -04:00
William Tu
b80d0b93b9 net: ip6_gre: fix tunnel metadata device sharing.
Currently ip6gre and ip6erspan share single metadata mode device,
using 'collect_md_tun'.  Thus, when doing:
  ip link add dev ip6gre11 type ip6gretap external
  ip link add dev ip6erspan12 type ip6erspan external
  RTNETLINK answers: File exists
simply fails due to the 2nd tries to create the same collect_md_tun.

The patch fixes it by adding a separate collect md tunnel device
for the ip6erspan, 'collect_md_tun_erspan'.  As a result, a couple
of places need to refactor/split up in order to distinguish ip6gre
and ip6erspan.

First, move the collect_md check at ip6gre_tunnel_{unlink,link} and
create separate function {ip6gre,ip6ersapn}_tunnel_{link_md,unlink_md}.
Then before link/unlink, make sure the link_md/unlink_md is called.
Finally, a separate ndo_uninit is created for ip6erspan.  Tested it
using the samples/bpf/test_tunnel_bpf.sh.

Fixes: ef7baf5e08 ("ip6_gre: add ip6 erspan collect_md mode")
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19 23:32:12 -04:00
Petr Machata
2d665034f2 net: ip6_gre: Fix ip6erspan hlen calculation
Even though ip6erspan_tap_init() sets up hlen and tun_hlen according to
what ERSPAN needs, it goes ahead to call ip6gre_tnl_link_config() which
overwrites these settings with GRE-specific ones.

Similarly for changelink callbacks, which are handled by
ip6gre_changelink() calls ip6gre_tnl_change() calls
ip6gre_tnl_link_config() as well.

The difference ends up being 12 vs. 20 bytes, and this is generally not
a problem, because a 12-byte request likely ends up allocating more and
the extra 8 bytes are thus available. However correct it is not.

So replace the newlink and changelink callbacks with an ERSPAN-specific
ones, reusing the newly-introduced _common() functions.

Fixes: 5a963eb61b ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:50:06 -04:00
Petr Machata
c8632fc30b net: ip6_gre: Split up ip6gre_changelink()
Extract from ip6gre_changelink() a reusable function
ip6gre_changelink_common(). This will allow introduction of
ERSPAN-specific _changelink() function with not a lot of code
duplication.

Fixes: 5a963eb61b ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:50:06 -04:00
Petr Machata
7fa38a7c85 net: ip6_gre: Split up ip6gre_newlink()
Extract from ip6gre_newlink() a reusable function
ip6gre_newlink_common(). The ip6gre_tnl_link_config() call needs to be
made customizable for ERSPAN, thus reorder it with calls to
ip6_tnl_change_mtu() and dev_hold(), and extract the whole tail to the
caller, ip6gre_newlink(). Thus enable an ERSPAN-specific _newlink()
function without a lot of duplicity.

Fixes: 5a963eb61b ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:50:06 -04:00
Petr Machata
a6465350ef net: ip6_gre: Split up ip6gre_tnl_change()
Split a reusable function ip6gre_tnl_copy_tnl_parm() from
ip6gre_tnl_change(). This will allow ERSPAN-specific code to
reuse the common parts while customizing the behavior for ERSPAN.

Fixes: 5a963eb61b ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:50:06 -04:00
Petr Machata
a483373ead net: ip6_gre: Split up ip6gre_tnl_link_config()
The function ip6gre_tnl_link_config() is used for setting up
configuration of both ip6gretap and ip6erspan tunnels. Split the
function into the common part and the route-lookup part. The latter then
takes the calculated header length as an argument. This split will allow
the patches down the line to sneak in a custom header length computation
for the ERSPAN tunnel.

Fixes: 5a963eb61b ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:50:06 -04:00
Petr Machata
5691484df9 net: ip6_gre: Fix headroom request in ip6erspan_tunnel_xmit()
dev->needed_headroom is not primed until ip6_tnl_xmit(), so it starts
out zero. Thus the call to skb_cow_head() fails to actually make sure
there's enough headroom to push the ERSPAN headers to. That can lead to
the panic cited below. (Reproducer below that).

Fix by requesting either needed_headroom if already primed, or just the
bare minimum needed for the header otherwise.

[  190.703567] kernel BUG at net/core/skbuff.c:104!
[  190.708384] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[  190.714007] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld
[  190.728975] CPU: 1 PID: 959 Comm: kworker/1:2 Not tainted 4.17.0-rc4-net_master-custom-139 #10
[  190.737647] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016
[  190.747006] Workqueue: ipv6_addrconf addrconf_dad_work
[  190.752222] RIP: 0010:skb_panic+0xc3/0x100
[  190.756358] RSP: 0018:ffff8801d54072f0 EFLAGS: 00010282
[  190.761629] RAX: 0000000000000085 RBX: ffff8801c1a8ecc0 RCX: 0000000000000000
[  190.768830] RDX: 0000000000000085 RSI: dffffc0000000000 RDI: ffffed003aa80e54
[  190.776025] RBP: ffff8801bd1ec5a0 R08: ffffed003aabce19 R09: ffffed003aabce19
[  190.783226] R10: 0000000000000001 R11: ffffed003aabce18 R12: ffff8801bf695dbe
[  190.790418] R13: 0000000000000084 R14: 00000000000006c0 R15: ffff8801bf695dc8
[  190.797621] FS:  0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000
[  190.805786] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  190.811582] CR2: 000055fa929aced0 CR3: 0000000003228004 CR4: 00000000001606e0
[  190.818790] Call Trace:
[  190.821264]  <IRQ>
[  190.823314]  ? ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre]
[  190.828940]  ? ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre]
[  190.834562]  skb_push+0x78/0x90
[  190.837749]  ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre]
[  190.843219]  ? ip6gre_tunnel_ioctl+0xd90/0xd90 [ip6_gre]
[  190.848577]  ? debug_check_no_locks_freed+0x210/0x210
[  190.853679]  ? debug_check_no_locks_freed+0x210/0x210
[  190.858783]  ? print_irqtrace_events+0x120/0x120
[  190.863451]  ? sched_clock_cpu+0x18/0x210
[  190.867496]  ? cyc2ns_read_end+0x10/0x10
[  190.871474]  ? skb_network_protocol+0x76/0x200
[  190.875977]  dev_hard_start_xmit+0x137/0x770
[  190.880317]  ? do_raw_spin_trylock+0x6d/0xa0
[  190.884624]  sch_direct_xmit+0x2ef/0x5d0
[  190.888589]  ? pfifo_fast_dequeue+0x3fa/0x670
[  190.892994]  ? pfifo_fast_change_tx_queue_len+0x810/0x810
[  190.898455]  ? __lock_is_held+0xa0/0x160
[  190.902422]  __qdisc_run+0x39e/0xfc0
[  190.906041]  ? _raw_spin_unlock+0x29/0x40
[  190.910090]  ? pfifo_fast_enqueue+0x24b/0x3e0
[  190.914501]  ? sch_direct_xmit+0x5d0/0x5d0
[  190.918658]  ? pfifo_fast_dequeue+0x670/0x670
[  190.923047]  ? __dev_queue_xmit+0x172/0x1770
[  190.927365]  ? preempt_count_sub+0xf/0xd0
[  190.931421]  __dev_queue_xmit+0x410/0x1770
[  190.935553]  ? ___slab_alloc+0x605/0x930
[  190.939524]  ? print_irqtrace_events+0x120/0x120
[  190.944186]  ? memcpy+0x34/0x50
[  190.947364]  ? netdev_pick_tx+0x1c0/0x1c0
[  190.951428]  ? __skb_clone+0x2fd/0x3d0
[  190.955218]  ? __copy_skb_header+0x270/0x270
[  190.959537]  ? rcu_read_lock_sched_held+0x93/0xa0
[  190.964282]  ? kmem_cache_alloc+0x344/0x4d0
[  190.968520]  ? cyc2ns_read_end+0x10/0x10
[  190.972495]  ? skb_clone+0x123/0x230
[  190.976112]  ? skb_split+0x820/0x820
[  190.979747]  ? tcf_mirred+0x554/0x930 [act_mirred]
[  190.984582]  tcf_mirred+0x554/0x930 [act_mirred]
[  190.989252]  ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred]
[  190.996109]  ? __lock_acquire+0x706/0x26e0
[  191.000239]  ? sched_clock_cpu+0x18/0x210
[  191.004294]  tcf_action_exec+0xcf/0x2a0
[  191.008179]  tcf_classify+0xfa/0x340
[  191.011794]  __netif_receive_skb_core+0x8e1/0x1c60
[  191.016630]  ? debug_check_no_locks_freed+0x210/0x210
[  191.021732]  ? nf_ingress+0x500/0x500
[  191.025458]  ? process_backlog+0x347/0x4b0
[  191.029619]  ? print_irqtrace_events+0x120/0x120
[  191.034302]  ? lock_acquire+0xd8/0x320
[  191.038089]  ? process_backlog+0x1b6/0x4b0
[  191.042246]  ? process_backlog+0xc2/0x4b0
[  191.046303]  process_backlog+0xc2/0x4b0
[  191.050189]  net_rx_action+0x5cc/0x980
[  191.053991]  ? napi_complete_done+0x2c0/0x2c0
[  191.058386]  ? mark_lock+0x13d/0xb40
[  191.062001]  ? clockevents_program_event+0x6b/0x1d0
[  191.066922]  ? print_irqtrace_events+0x120/0x120
[  191.071593]  ? __lock_is_held+0xa0/0x160
[  191.075566]  __do_softirq+0x1d4/0x9d2
[  191.079282]  ? ip6_finish_output2+0x524/0x1460
[  191.083771]  do_softirq_own_stack+0x2a/0x40
[  191.087994]  </IRQ>
[  191.090130]  do_softirq.part.13+0x38/0x40
[  191.094178]  __local_bh_enable_ip+0x135/0x190
[  191.098591]  ip6_finish_output2+0x54d/0x1460
[  191.102916]  ? ip6_forward_finish+0x2f0/0x2f0
[  191.107314]  ? ip6_mtu+0x3c/0x2c0
[  191.110674]  ? ip6_finish_output+0x2f8/0x650
[  191.114992]  ? ip6_output+0x12a/0x500
[  191.118696]  ip6_output+0x12a/0x500
[  191.122223]  ? ip6_route_dev_notify+0x5b0/0x5b0
[  191.126807]  ? ip6_finish_output+0x650/0x650
[  191.131120]  ? ip6_fragment+0x1a60/0x1a60
[  191.135182]  ? icmp6_dst_alloc+0x26e/0x470
[  191.139317]  mld_sendpack+0x672/0x830
[  191.143021]  ? igmp6_mcf_seq_next+0x2f0/0x2f0
[  191.147429]  ? __local_bh_enable_ip+0x77/0x190
[  191.151913]  ipv6_mc_dad_complete+0x47/0x90
[  191.156144]  addrconf_dad_completed+0x561/0x720
[  191.160731]  ? addrconf_rs_timer+0x3a0/0x3a0
[  191.165036]  ? mark_held_locks+0xc9/0x140
[  191.169095]  ? __local_bh_enable_ip+0x77/0x190
[  191.173570]  ? addrconf_dad_work+0x50d/0xa20
[  191.177886]  ? addrconf_dad_work+0x529/0xa20
[  191.182194]  addrconf_dad_work+0x529/0xa20
[  191.186342]  ? addrconf_dad_completed+0x720/0x720
[  191.191088]  ? __lock_is_held+0xa0/0x160
[  191.195059]  ? process_one_work+0x45d/0xe20
[  191.199302]  ? process_one_work+0x51e/0xe20
[  191.203531]  ? rcu_read_lock_sched_held+0x93/0xa0
[  191.208279]  process_one_work+0x51e/0xe20
[  191.212340]  ? pwq_dec_nr_in_flight+0x200/0x200
[  191.216912]  ? get_lock_stats+0x4b/0xf0
[  191.220788]  ? preempt_count_sub+0xf/0xd0
[  191.224844]  ? worker_thread+0x219/0x860
[  191.228823]  ? do_raw_spin_trylock+0x6d/0xa0
[  191.233142]  worker_thread+0xeb/0x860
[  191.236848]  ? process_one_work+0xe20/0xe20
[  191.241095]  kthread+0x206/0x300
[  191.244352]  ? process_one_work+0xe20/0xe20
[  191.248587]  ? kthread_stop+0x570/0x570
[  191.252459]  ret_from_fork+0x3a/0x50
[  191.256082] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24
[  191.275327] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d54072f0
[  191.281024] ---[ end trace 7ea51094e099e006 ]---
[  191.285724] Kernel panic - not syncing: Fatal exception in interrupt
[  191.292168] Kernel Offset: disabled
[  191.295697] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Reproducer:

	ip link add h1 type veth peer name swp1
	ip link add h3 type veth peer name swp3

	ip link set dev h1 up
	ip address add 192.0.2.1/28 dev h1

	ip link add dev vh3 type vrf table 20
	ip link set dev h3 master vh3
	ip link set dev vh3 up
	ip link set dev h3 up

	ip link set dev swp3 up
	ip address add dev swp3 2001:db8:2::1/64

	ip link set dev swp1 up
	tc qdisc add dev swp1 clsact

	ip link add name gt6 type ip6erspan \
		local 2001:db8:2::1 remote 2001:db8:2::2 oseq okey 123
	ip link set dev gt6 up

	sleep 1

	tc filter add dev swp1 ingress pref 1000 matchall skip_hw \
		action mirred egress mirror dev gt6
	ping -I h1 192.0.2.2

Fixes: e41c7c68ea ("ip6erspan: make sure enough headroom at xmit.")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:50:06 -04:00
Petr Machata
01b8d064d5 net: ip6_gre: Request headroom in __gre6_xmit()
__gre6_xmit() pushes GRE headers before handing over to ip6_tnl_xmit()
for generic IP-in-IP processing. However it doesn't make sure that there
is enough headroom to push the header to. That can lead to the panic
cited below. (Reproducer below that).

Fix by requesting either needed_headroom if already primed, or just the
bare minimum needed for the header otherwise.

[  158.576725] kernel BUG at net/core/skbuff.c:104!
[  158.581510] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[  158.587174] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld
[  158.602268] CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 4.17.0-rc4-net_master-custom-139 #10
[  158.610938] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016
[  158.620426] RIP: 0010:skb_panic+0xc3/0x100
[  158.624586] RSP: 0018:ffff8801d3f27110 EFLAGS: 00010286
[  158.629882] RAX: 0000000000000082 RBX: ffff8801c02cc040 RCX: 0000000000000000
[  158.637127] RDX: 0000000000000082 RSI: dffffc0000000000 RDI: ffffed003a7e4e18
[  158.644366] RBP: ffff8801bfec8020 R08: ffffed003aabce19 R09: ffffed003aabce19
[  158.651574] R10: 000000000000000b R11: ffffed003aabce18 R12: ffff8801c364de66
[  158.658786] R13: 000000000000002c R14: 00000000000000c0 R15: ffff8801c364de68
[  158.666007] FS:  0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000
[  158.674212] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  158.680036] CR2: 00007f4b3702dcd0 CR3: 0000000003228002 CR4: 00000000001606e0
[  158.687228] Call Trace:
[  158.689752]  ? __gre6_xmit+0x246/0xd80 [ip6_gre]
[  158.694475]  ? __gre6_xmit+0x246/0xd80 [ip6_gre]
[  158.699141]  skb_push+0x78/0x90
[  158.702344]  __gre6_xmit+0x246/0xd80 [ip6_gre]
[  158.706872]  ip6gre_tunnel_xmit+0x3bc/0x610 [ip6_gre]
[  158.711992]  ? __gre6_xmit+0xd80/0xd80 [ip6_gre]
[  158.716668]  ? debug_check_no_locks_freed+0x210/0x210
[  158.721761]  ? print_irqtrace_events+0x120/0x120
[  158.726461]  ? sched_clock_cpu+0x18/0x210
[  158.730572]  ? sched_clock_cpu+0x18/0x210
[  158.734692]  ? cyc2ns_read_end+0x10/0x10
[  158.738705]  ? skb_network_protocol+0x76/0x200
[  158.743216]  ? netif_skb_features+0x1b2/0x550
[  158.747648]  dev_hard_start_xmit+0x137/0x770
[  158.752010]  sch_direct_xmit+0x2ef/0x5d0
[  158.755992]  ? pfifo_fast_dequeue+0x3fa/0x670
[  158.760460]  ? pfifo_fast_change_tx_queue_len+0x810/0x810
[  158.765975]  ? __lock_is_held+0xa0/0x160
[  158.770002]  __qdisc_run+0x39e/0xfc0
[  158.773673]  ? _raw_spin_unlock+0x29/0x40
[  158.777781]  ? pfifo_fast_enqueue+0x24b/0x3e0
[  158.782191]  ? sch_direct_xmit+0x5d0/0x5d0
[  158.786372]  ? pfifo_fast_dequeue+0x670/0x670
[  158.790818]  ? __dev_queue_xmit+0x172/0x1770
[  158.795195]  ? preempt_count_sub+0xf/0xd0
[  158.799313]  __dev_queue_xmit+0x410/0x1770
[  158.803512]  ? ___slab_alloc+0x605/0x930
[  158.807525]  ? ___slab_alloc+0x605/0x930
[  158.811540]  ? memcpy+0x34/0x50
[  158.814768]  ? netdev_pick_tx+0x1c0/0x1c0
[  158.818895]  ? __skb_clone+0x2fd/0x3d0
[  158.822712]  ? __copy_skb_header+0x270/0x270
[  158.827079]  ? rcu_read_lock_sched_held+0x93/0xa0
[  158.831903]  ? kmem_cache_alloc+0x344/0x4d0
[  158.836199]  ? skb_clone+0x123/0x230
[  158.839869]  ? skb_split+0x820/0x820
[  158.843521]  ? tcf_mirred+0x554/0x930 [act_mirred]
[  158.848407]  tcf_mirred+0x554/0x930 [act_mirred]
[  158.853104]  ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred]
[  158.860005]  ? __lock_acquire+0x706/0x26e0
[  158.864162]  ? mark_lock+0x13d/0xb40
[  158.867832]  tcf_action_exec+0xcf/0x2a0
[  158.871736]  tcf_classify+0xfa/0x340
[  158.875402]  __netif_receive_skb_core+0x8e1/0x1c60
[  158.880334]  ? nf_ingress+0x500/0x500
[  158.884059]  ? process_backlog+0x347/0x4b0
[  158.888241]  ? lock_acquire+0xd8/0x320
[  158.892050]  ? process_backlog+0x1b6/0x4b0
[  158.896228]  ? process_backlog+0xc2/0x4b0
[  158.900291]  process_backlog+0xc2/0x4b0
[  158.904210]  net_rx_action+0x5cc/0x980
[  158.908047]  ? napi_complete_done+0x2c0/0x2c0
[  158.912525]  ? rcu_read_unlock+0x80/0x80
[  158.916534]  ? __lock_is_held+0x34/0x160
[  158.920541]  __do_softirq+0x1d4/0x9d2
[  158.924308]  ? trace_event_raw_event_irq_handler_exit+0x140/0x140
[  158.930515]  run_ksoftirqd+0x1d/0x40
[  158.934152]  smpboot_thread_fn+0x32b/0x690
[  158.938299]  ? sort_range+0x20/0x20
[  158.941842]  ? preempt_count_sub+0xf/0xd0
[  158.945940]  ? schedule+0x5b/0x140
[  158.949412]  kthread+0x206/0x300
[  158.952689]  ? sort_range+0x20/0x20
[  158.956249]  ? kthread_stop+0x570/0x570
[  158.960164]  ret_from_fork+0x3a/0x50
[  158.963823] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24
[  158.983235] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d3f27110
[  158.988935] ---[ end trace 5af56ee845aa6cc8 ]---
[  158.993641] Kernel panic - not syncing: Fatal exception in interrupt
[  159.000176] Kernel Offset: disabled
[  159.003767] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Reproducer:

	ip link add h1 type veth peer name swp1
	ip link add h3 type veth peer name swp3

	ip link set dev h1 up
	ip address add 192.0.2.1/28 dev h1

	ip link add dev vh3 type vrf table 20
	ip link set dev h3 master vh3
	ip link set dev vh3 up
	ip link set dev h3 up

	ip link set dev swp3 up
	ip address add dev swp3 2001:db8:2::1/64

	ip link set dev swp1 up
	tc qdisc add dev swp1 clsact

	ip link add name gt6 type ip6gretap \
		local 2001:db8:2::1 remote 2001:db8:2::2
	ip link set dev gt6 up

	sleep 1

	tc filter add dev swp1 ingress pref 1000 matchall skip_hw \
		action mirred egress mirror dev gt6
	ping -I h1 192.0.2.2

Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:50:06 -04:00
William Tu
02f99df187 erspan: fix invalid erspan version.
ERSPAN only support version 1 and 2.  When packets send to an
erspan device which does not have proper version number set,
drop the packet.  In real case, we observe multicast packets
sent to the erspan pernet device, erspan0, which does not have
erspan version configured.

Reported-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:48:49 -04:00