Reset the per-vCPU available and dirty register masks when switching
between vmcs01 and vmcs02, as the masks track state relative to the
current VMCS. The stale masks don't cause problems in the current code
base because the registers are either unconditionally written on nested
transitions or, in the case of segment registers, have an additional
tracker that is manually reset.
Note, by dropping (previously implicitly, now explicitly) the dirty mask
when switching the active VMCS, KVM is technically losing writes to the
associated fields. But, the only regs that can be dirtied (RIP, RSP and
PDPTRs) are unconditionally written on nested transitions, e.g. explicit
writeback is a waste of cycles, and a WARN_ON would be rather pointless.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415203454.8296-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invoke ept_save_pdptrs() when restoring L1's host state on a "late"
VM-Fail if and only if PAE paging is enabled. This saves a CALL in the
common case where L1 is a 64-bit host, and avoids incorrectly marking
the PDPTRs as dirty.
WARN if ept_save_pdptrs() is called with PAE disabled now that the
nested usage pre-checks is_pae_paging(). Barring a bug in KVM's MMU,
attempting to read the PDPTRs with PAE disabled is now impossible.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415203454.8296-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use "vm_exit_reason" for code related to injecting a nested VM-Exit to
VM-Exits to make it clear that nested_vmx_vmexit() expects the full exit
eason, not just the basic exit reason. The basic exit reason (bits 15:0
of vmcs.VM_EXIT_REASON) is colloquially referred to as simply "exit
reason".
Note, other flows, e.g. vmx_handle_exit(), are intentionally left as is.
A future patch will convert vmx->exit_reason to a union + bit-field, and
the exempted flows will interact with the unionized of "exit_reason".
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly check only the basic exit reason when emulating an external
interrupt VM-Exit in nested_vmx_vmexit(). Checking the full exit reason
doesn't currently cause problems, but only because the only exit reason
modifier support by KVM is FAILED_VMENTRY, which is mutually exclusive
with EXTERNAL_INTERRUPT. Future modifiers, e.g. ENCLAVE_MODE, will
coexist with EXTERNAL_INTERRUPT.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-9-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Grab the exit reason from the vcpu struct in nested_vmx_reflect_vmexit()
instead of having the exit reason explicitly passed from the caller.
This fixes a discrepancy between VM-Fail and VM-Exit handling, as the
VM-Fail case is already handled by checking vcpu_vmx, e.g. the exit
reason previously passed on the stack is bogus if vmx->fail is set.
Not taking the exit reason on the stack also avoids having to document
that nested_vmx_reflect_vmexit() requires the full exit reason, as
opposed to just the basic exit reason, which is not at all obvious since
the only usages of the full exit reason are for tracing and way down in
prepare_vmcs12() where it's propagated to vmcs12.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the WARN in nested_vmx_reflect_vmexit() that fires if KVM attempts
to reflect an external interrupt. The WARN is blatantly impossible to
hit now that nested_vmx_l0_wants_exit() is called from
nested_vmx_reflect_vmexit() unconditionally returns true for
EXTERNAL_INTERRUPT.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split the logic that determines whether a nested VM-Exit is reflected
into L1 into "L0 wants" and "L1 wants" to document the core control flow
at a high level. If L0 wants the VM-Exit, e.g. because the exit is due
to a hardware event that isn't passed through to L1, then KVM should
handle the exit in L0 without considering L1's configuration. Then, if
L0 doesn't want the exit, KVM needs to query L1's wants to determine
whether or not L1 "caused" the exit, e.g. by setting an exiting control,
versus the exit occurring due to an L0 setting, e.g. when L0 intercepts
an action that L1 chose to pass-through.
Note, this adds an extra read on vmcs.VM_EXIT_INTR_INFO for exception.
This will be addressed in a future patch via a VMX-wide enhancement,
rather than pile on another case where vmx->exit_intr_info is
conditionally available.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the tracepoint for nested VM-Exits in preparation of splitting the
reflection logic into L1 wants the exit vs. L0 always handles the exit.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for VM-Fail on nested VM-Enter in nested_vmx_reflect_vmexit() in
preparation for separating nested_vmx_exit_reflected() into separate "L0
wants exit exit" and "L1 wants the exit" helpers.
Explicitly set exit_intr_info and exit_qual to zero instead of reading
them from vmcs02, as they are invalid on VM-Fail (and thankfully ignored
by nested_vmx_vmexit() for nested VM-Fail).
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Uninline nested_vmx_reflect_vmexit() in preparation of refactoring
nested_vmx_exit_reflected() to split up the reflection logic into more
consumable chunks, e.g. VM-Fail vs. L1 wants the exit vs. L0 always
handles the exit.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the call to nested_vmx_exit_reflected() from vmx_handle_exit() into
nested_vmx_reflect_vmexit() and change the semantics of the return value
for nested_vmx_reflect_vmexit() to indicate whether or not the exit was
reflected into L1. nested_vmx_exit_reflected() and
nested_vmx_reflect_vmexit() are intrinsically tied together, calling one
without simultaneously calling the other makes little sense.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415175519.14230-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The macros VM_STAT and VCPU_STAT are redundantly implemented in multiple
files, each used by a different architecure to initialize the debugfs
entries for statistics. Since they all have the same purpose, they can be
unified in a single common definition in include/linux/kvm_host.h
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20200414155625.20559-1-eesposit@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use do_machine_check instead of INT $12 to pass MCE to the host,
the same approach VMX uses.
On a related note, there is no reason to limit the use of do_machine_check
to 64 bit targets, as is currently done for VMX. MCE handling works
for both target families.
The patch is only compile tested, for both, 64 and 32 bit targets,
someone should test the passing of the exception by injecting
some MCEs into the guest.
For future non-RFC patch, kvm_machine_check should be moved to some
appropriate header file.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200411153627.3474710-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename @cr3 to @pgd in vmx_load_mmu_pgd() to reflect that it will be
loaded into vmcs.EPT_POINTER and not vmcs.GUEST_CR3 when EPT is enabled.
Similarly, load guest_cr3 with @pgd if and only if EPT is disabled.
This fixes one of the last, if not _the_ last, cases in KVM where a
variable that is not strictly a cr3 value uses "cr3" instead of "pgd".
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-38-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename functions and variables in kvm_mmu_new_cr3() and related code to
replace "cr3" with "pgd", i.e. continue the work started by commit
727a7e27cf ("KVM: x86: rename set_cr3 callback and related flags to
load_mmu_pgd"). kvm_mmu_new_cr3() and company are not always loading a
new CR3, e.g. when nested EPT is enabled "cr3" is actually an EPTP.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-37-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add logic to handle_invept() to free only those roots that match the
target EPT context when emulating a single-context INVEPT.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-36-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unconditionally skip the TLB flush triggered when reusing a root for a
nested transition as nested_vmx_transition_tlb_flush() ensures the TLB
is flushed when needed, regardless of whether the MMU can reuse a cached
root (or the last root).
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-35-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip the MMU sync when reusing a cached root if EPT is enabled or L1
enabled VPID for L2.
If EPT is enabled, guest-physical mappings aren't flushed even if VPID
is disabled, i.e. L1 can't expect stale TLB entries to be flushed if it
has enabled EPT and L0 isn't shadowing PTEs (for L1 or L2) if L1 has
EPT disabled.
If VPID is enabled (and EPT is disabled), then L1 can't expect stale TLB
entries to be flushed (for itself or L2).
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-34-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a module param, flush_on_reuse, to override skip_tlb_flush and
skip_mmu_sync when performing a so called "fast cr3 switch", i.e. when
reusing a cached root. The primary motiviation for the control is to
provide a fallback mechanism in the event that TLB flushing and/or MMU
sync bugs are exposed/introduced by upcoming changes to stop
unconditionally flushing on nested VMX transitions.
Suggested-by: Jim Mattson <jmattson@google.com>
Suggested-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-33-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a separate "skip" override for MMU sync, a future change to avoid
TLB flushes on nested VMX transitions may need to sync the MMU even if
the TLB flush is unnecessary.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-32-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle the side effects of a fast CR3 (PGD) switch up a level in
__kvm_mmu_new_cr3(), which is the only caller of fast_cr3_switch().
This consolidates handling all side effects in __kvm_mmu_new_cr3()
(where freeing the current root when KVM can't do a fast switch is
already handled), and ameliorates the pain of adding a second boolean in
a future patch to provide a separate "skip" override for the MMU sync.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-31-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't reload the APIC access page if its control is disabled, e.g. if
the guest is running with x2APIC (likely) or with the local APIC
disabled (unlikely), to avoid unnecessary TLB flushes and VMWRITEs.
Unconditionally reload the APIC access page and flush the TLB when
the guest's virtual APIC transitions to "xAPIC enabled", as any
changes to the APIC access page's mapping will not be recorded while
the guest's virtual APIC is disabled.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-30-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the retrieval of the HPA associated with L1's APIC access page into
VMX code to avoid unnecessarily calling gfn_to_page(), e.g. when the
vCPU is in guest mode (L2). Alternatively, the optimization logic in
VMX could be mirrored into the common x86 code, but that will get ugly
fast when further optimizations are introduced.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-29-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Defer reloading L1's APIC page by logging the need for a reload and
processing it during nested VM-Exit instead of unconditionally reloading
the APIC page on nested VM-Exit. This eliminates a TLB flush on the
majority of VM-Exits as the APIC page rarely needs to be reloaded.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-28-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flush only the current context, as opposed to all contexts, when
requesting a TLB flush to handle the scenario where a L1 does not expect
a TLB flush, but one is required because L1 and L2 shared an ASID. This
occurs if EPT is disabled (no per-EPTP tag), VPID is enabled (hardware
doesn't flush unconditionally) and vmcs02 does not have its own VPID due
to exhaustion of available VPIDs.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-27-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flush only the current ASID/context when requesting a TLB flush due to a
change in the current vCPU's MMU to avoid blasting away TLB entries
associated with other ASIDs/contexts, e.g. entries cached for L1 when
a change in L2's MMU requires a flush.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-26-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add KVM_REQ_TLB_FLUSH_CURRENT to allow optimized TLB flushing of VMX's
EPTP/VPID contexts[*] from the KVM MMU and/or in a deferred manner, e.g.
to flush L2's context during nested VM-Enter.
Convert KVM_REQ_TLB_FLUSH to KVM_REQ_TLB_FLUSH_CURRENT in flows where
the flush is directly associated with vCPU-scoped instruction emulation,
i.e. MOV CR3 and INVPCID.
Add a comment in vmx_vcpu_load_vmcs() above its KVM_REQ_TLB_FLUSH to
make it clear that it deliberately requests a flush of all contexts.
Service any pending flush request on nested VM-Exit as it's possible a
nested VM-Exit could occur after requesting a flush for L2. Add the
same logic for nested VM-Enter even though it's _extremely_ unlikely
for flush to be pending on nested VM-Enter, but theoretically possible
(in the future) due to RSM (SMM) emulation.
[*] Intel also has an Address Space Identifier (ASID) concept, e.g.
EPTP+VPID+PCID == ASID, it's just not documented in the SDM because
the rules of invalidation are different based on which piece of the
ASID is being changed, i.e. whether the EPTP, VPID, or PCID context
must be invalidated.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-25-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper to determine whether or not a full TLB flush needs to be
performed on nested VM-Enter/VM-Exit, as the logic is identical for both
flows and needs a fairly beefy comment to boot. This also provides a
common point to make future adjustments to the logic.
Handle vpid12 changes the new helper as well even though it is specific
to VM-Enter. The vpid12 logic is an extension of the flushing logic,
and it's worth the extra bool parameter to provide a single location for
the flushing logic.
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-24-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename ->tlb_flush() to ->tlb_flush_all() in preparation for adding a
new hook to flush only the current ASID/context.
Opportunstically replace the comment in vmx_flush_tlb() that explains
why it flushes all EPTP/VPID contexts with a comment explaining why it
unconditionally uses INVEPT when EPT is enabled. I.e. rely on the "all"
part of the name to clarify why it does global INVEPT/INVVPID.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-23-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a comment in svm_flush_tlb() to document why it flushes only the
current ASID, even when it is invoked when flushing remote TLBs.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-22-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper to flush TLB entries only for the current EPTP/VPID context
and use it for the existing direct invocations of vmx_flush_tlb(). TLB
flushes that are specific to the current vCPU state do not need to flush
other contexts.
Note, both converted call sites happen to be related to the APIC access
page, this is purely coincidental.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-21-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move nested_get_vpid02() to vmx/nested.h so that a future patch can
reference it from vmx.c to implement context-specific TLB flushing.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-20-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vmx_flush_tlb() to vmx.c and make it non-inline static now that all
its callers live in vmx.c.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-19-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use svm_flush_tlb() directly for kvm_x86_ops->tlb_flush_guest() now that
the @invalidate_gpa param to ->tlb_flush() is gone, i.e. the wrapper for
->tlb_flush_guest() is no longer necessary.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-18-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop @invalidate_gpa from ->tlb_flush() and kvm_vcpu_flush_tlb() now
that all callers pass %true for said param, or ignore the param (SVM has
an internal call to svm_flush_tlb() in svm_flush_tlb_guest that somewhat
arbitrarily passes %false).
Remove __vmx_flush_tlb() as it is no longer used.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-17-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor vmx_flush_tlb_gva() to remove a superfluous local variable and
clean up its comment, which is oddly located below the code it is
commenting.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-16-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V PV TLB flush mechanism does TLB flush on behalf of the guest
so doing tlb_flush_all() is an overkill, switch to using tlb_flush_guest()
(just like KVM PV TLB flush mechanism) instead. Introduce
KVM_REQ_HV_TLB_FLUSH to support the change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a dedicated hook to handle flushing TLB entries on behalf of the
guest, i.e. for a paravirtualized TLB flush, and use it directly instead
of bouncing through kvm_vcpu_flush_tlb().
For VMX, change the effective implementation implementation to never do
INVEPT and flush only the current context, i.e. to always flush via
INVVPID(SINGLE_CONTEXT). The INVEPT performed by __vmx_flush_tlb() when
@invalidate_gpa=false and enable_vpid=0 is unnecessary, as it will only
flush guest-physical mappings; linear and combined mappings are flushed
by VM-Enter when VPID is disabled, and changes in the guest pages tables
do not affect guest-physical mappings.
When EPT and VPID are enabled, doing INVVPID is not required (by Intel's
architecture) to invalidate guest-physical mappings, i.e. TLB entries
that cache guest-physical mappings can live across INVVPID as the
mappings are associated with an EPTP, not a VPID. The intent of
@invalidate_gpa is to inform vmx_flush_tlb() that it must "invalidate
gpa mappings", i.e. do INVEPT and not simply INVVPID. Other than nested
VPID handling, which now calls vpid_sync_context() directly, the only
scenario where KVM can safely do INVVPID instead of INVEPT (when EPT is
enabled) is if KVM is flushing TLB entries from the guest's perspective,
i.e. is only required to invalidate linear mappings.
For SVM, flushing TLB entries from the guest's perspective can be done
by flushing the current ASID, as changes to the guest's page tables are
associated only with the current ASID.
Adding a dedicated ->tlb_flush_guest() paves the way toward removing
@invalidate_gpa, which is a potentially dangerous control flag as its
meaning is not exactly crystal clear, even for those who are familiar
with the subtleties of what mappings Intel CPUs are/aren't allowed to
keep across various invalidation scenarios.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-15-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vpid_sync_vcpu_addr() to emulate the "individual address" variant of
INVVPID now that said function handles the fallback case of the (host)
CPU not supporting "individual address".
Note, the "vpid == 0" checks in the vpid_sync_*() helpers aren't
actually redundant with the "!operand.vpid" check in handle_invvpid(),
as the vpid passed to vpid_sync_vcpu_addr() is a KVM (host) controlled
value, i.e. vpid02 can be zero even if operand.vpid is non-zero.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-14-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the INVVPID capabilities checks from vpid_sync_vcpu_single() and
vpid_sync_vcpu_global() now that all callers ensure the INVVPID variant
is supported. Note, in some cases the guarantee is provided in concert
with hardware_setup(), which enables VPID if and only if at least of
invvpid_single() or invvpid_global() is supported.
Drop the WARN_ON_ONCE() from vmx_flush_tlb() as vpid_sync_vcpu_single()
will trigger a WARN() on INVVPID failure, i.e. if SINGLE_CONTEXT isn't
supported.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-13-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Directly invoke vpid_sync_context() to do a global INVVPID when the
individual address variant is not supported instead of deferring such
behavior to the caller. This allows for additional consolidation of
code as the logic is basically identical to the emulation of the
individual address variant in handle_invvpid().
No functional change intended.
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-12-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vpid_sync_vcpu_addr() below vpid_sync_context() so that it can be
refactored in a future patch to call vpid_sync_context() directly when
the "individual address" INVVPID variant isn't supported.
No functional change intended.
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vpid_sync_context() directly for flows that run if and only if
enable_vpid=1, or more specifically, nested VMX flows that are gated by
vmx->nested.msrs.secondary_ctls_high.SECONDARY_EXEC_ENABLE_VPID being
set, which is allowed if and only if enable_vpid=1. Because these flows
call __vmx_flush_tlb() with @invalidate_gpa=false, the if-statement that
decides between INVEPT and INVVPID will always go down the INVVPID path,
i.e. call vpid_sync_context() because
"enable_ept && (invalidate_gpa || !enable_vpid)" always evaluates false.
This helps pave the way toward removing @invalidate_gpa and @vpid from
__vmx_flush_tlb() and its callers.
Opportunstically drop unnecessary brackets in handle_invvpid() around an
affected __vmx_flush_tlb()->vpid_sync_context() conversion.
No functional change intended.
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip the global INVVPID in the unlikely scenario that vpid==0 and the
SINGLE_CONTEXT variant of INVVPID is unsupported. If vpid==0, there's
no need to INVVPID as it's impossible to do VM-Enter with VPID enabled
and vmcs.VPID==0, i.e. there can't be any TLB entries for the vCPU with
vpid==0. The fact that the SINGLE_CONTEXT variant isn't supported is
irrelevant.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-9-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When injecting a page fault or EPT violation/misconfiguration, KVM is
not syncing any shadow PTEs associated with the faulting address,
including those in previous MMUs that are associated with L1's current
EPTP (in a nested EPT scenario), nor is it flushing any hardware TLB
entries. All this is done by kvm_mmu_invalidate_gva.
Page faults that are either !PRESENT or RSVD are exempt from the flushing,
as the CPU is not allowed to cache such translations.
Signed-off-by: Junaid Shahid <junaids@google.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To reconstruct the kvm_mmu to be used for page fault injection, we
can simply use fault->nested_page_fault. This matches how
fault->nested_page_fault is assigned in the first place by
FNAME(walk_addr_generic).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrap the combination of mmu->invlpg and kvm_x86_ops->tlb_flush_gva
into a new function. This function also lets us specify the host PGD to
invalidate and also the MMU, both of which will be useful in fixing and
simplifying kvm_inject_emulated_page_fault.
A nested guest's MMU however has g_context->invlpg == NULL. Instead of
setting it to nonpaging_invlpg, make kvm_mmu_invalidate_gva the only
entry point to mmu->invlpg and make a NULL invlpg pointer equivalent
to nonpaging_invlpg, saving a retpoline.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Frame pointers are completely broken by vmenter.S because it clobbers
RBP:
arch/x86/kvm/svm/vmenter.o: warning: objtool: __svm_vcpu_run()+0xe4: BP used as a scratch register
That's unavoidable, so just skip checking that file when frame pointers
are configured in.
On the other hand, ORC can handle that code just fine, so leave objtool
enabled in the !FRAME_POINTER case.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Message-Id: <01fae42917bacad18be8d2cbc771353da6603473.1587398610.git.jpoimboe@redhat.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Fixes: 199cd1d7b5 ("KVM: SVM: Split svm_vcpu_run inline assembly to separate file")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux 3.14 unconditionally reads the RAPL PMU MSRs on boot, without handling
General Protection Faults on reading those MSRs. Rather than injecting a #GP,
which prevents boot, handle the MSRs by returning 0 for their data. Zero was
checked to be safe by code review of the RAPL PMU driver and in discussion
with the original driver author (eranian@google.com).
Signed-off-by: Venkatesh Srinivas <venkateshs@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200416184254.248374-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes a NULL pointer dereference, caused by the PIT firing an interrupt
before the interrupt table has been initialized.
SET_PIT2 can race with the creation of the IRQchip. In particular,
if SET_PIT2 is called with a low PIT timer period (after the creation of
the IOAPIC, but before the instantiation of the irq routes), the PIT can
fire an interrupt at an uninitialized table.
Signed-off-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200416191152.259434-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Export the page fault propagation helper so that VMX can use it to
correctly emulate TLB invalidation on page faults in an upcoming patch.
In the (hopefully) not-too-distant future, SGX virtualization will also
want access to the helper for injecting page faults to the correct level
(L1 vs. L2) when emulating ENCLS instructions.
Rename the function to kvm_inject_emulated_page_fault() to clarify that
it is (a) injecting a fault and (b) only for page faults. WARN if it's
invoked with an exception other than PF_VECTOR.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-6-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free all roots when emulating INVVPID for L1 and EPT is disabled, as
outstanding changes to the page tables managed by L1 need to be
recognized. Because L1 and L2 share an MMU when EPT is disabled, and
because VPID is not tracked by the MMU role, all roots in the current
MMU (root_mmu) need to be freed, otherwise a future nested VM-Enter or
VM-Exit could do a fast CR3 switch (without a flush/sync) and consume
stale SPTEs.
Fixes: 5c614b3583 ("KVM: nVMX: nested VPID emulation")
Signed-off-by: Junaid Shahid <junaids@google.com>
[sean: ported to upstream KVM, reworded the comment and changelog]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-5-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free all L2 (guest_mmu) roots when emulating INVEPT for L1. Outstanding
changes to the EPT tables managed by L1 need to be recognized, and
relying on KVM to always flush L2's EPTP context on nested VM-Enter is
dangerous.
Similar to handle_invpcid(), rely on kvm_mmu_free_roots() to do a remote
TLB flush if necessary, e.g. if L1 has never entered L2 then there is
nothing to be done.
Nuking all L2 roots is overkill for the single-context variant, but it's
the safe and easy bet. A more precise zap mechanism will be added in
the future. Add a TODO to call out that KVM only needs to invalidate
affected contexts.
Fixes: 14c07ad89f ("x86/kvm/mmu: introduce guest_mmu")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-4-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signal VM-Fail for the single-context variant of INVEPT if the specified
EPTP is invalid. Per the INEVPT pseudocode in Intel's SDM, it's subject
to the standard EPT checks:
If VM entry with the "enable EPT" VM execution control set to 1 would
fail due to the EPTP value then VMfail(Invalid operand to INVEPT/INVVPID);
Fixes: bfd0a56b90 ("nEPT: Nested INVEPT")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-3-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flush all EPTP/VPID contexts if a TLB flush _may_ have been triggered by
a remote or deferred TLB flush, i.e. by KVM_REQ_TLB_FLUSH. Remote TLB
flushes require all contexts to be invalidated, not just the active
contexts, e.g. all mappings in all contexts for a given HVA need to be
invalidated on a mmu_notifier invalidation. Similarly, the instigator
of the deferred TLB flush may be expecting all contexts to be flushed,
e.g. vmx_vcpu_load_vmcs().
Without nested VMX, flushing only the current EPTP/VPID context isn't
problematic because KVM uses a constant VPID for each vCPU, and
mmu_alloc_direct_roots() all but guarantees KVM will use a single EPTP
for L1. In the rare case where a different EPTP is created or reused,
KVM (currently) unconditionally flushes the new EPTP context prior to
entering the guest.
With nested VMX, KVM conditionally uses a different VPID for L2, and
unconditionally uses a different EPTP for L2. Because KVM doesn't
_intentionally_ guarantee L2's EPTP/VPID context is flushed on nested
VM-Enter, it'd be possible for a malicious L1 to attack the host and/or
different VMs by exploiting the lack of flushing for L2.
1) Launch nested guest from malicious L1.
2) Nested VM-Enter to L2.
3) Access target GPA 'g'. CPU inserts TLB entry tagged with L2's ASID
mapping 'g' to host PFN 'x'.
2) Nested VM-Exit to L1.
3) L1 triggers kernel same-page merging (ksm) by duplicating/zeroing
the page for PFN 'x'.
4) Host kernel merges PFN 'x' with PFN 'y', i.e. unmaps PFN 'x' and
remaps the page to PFN 'y'. mmu_notifier sends invalidate command,
KVM flushes TLB only for L1's ASID.
4) Host kernel reallocates PFN 'x' to some other task/guest.
5) Nested VM-Enter to L2. KVM does not invalidate L2's EPTP or VPID.
6) L2 accesses GPA 'g' and gains read/write access to PFN 'x' via its
stale TLB entry.
However, current KVM unconditionally flushes L1's EPTP/VPID context on
nested VM-Exit. But, that behavior is mostly unintentional, KVM doesn't
go out of its way to flush EPTP/VPID on nested VM-Enter/VM-Exit, rather
a TLB flush is guaranteed to occur prior to re-entering L1 due to
__kvm_mmu_new_cr3() always being called with skip_tlb_flush=false. On
nested VM-Enter, this happens via kvm_init_shadow_ept_mmu() (nested EPT
enabled) or in nested_vmx_load_cr3() (nested EPT disabled). On nested
VM-Exit it occurs via nested_vmx_load_cr3().
This also fixes a bug where a deferred TLB flush in the context of L2,
with EPT disabled, would flush L1's VPID instead of L2's VPID, as
vmx_flush_tlb() flushes L1's VPID regardless of is_guest_mode().
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Junaid Shahid <junaids@google.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: John Haxby <john.haxby@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Fixes: efebf0aaec ("KVM: nVMX: Do not flush TLB on L1<->L2 transitions if L1 uses VPID and EPT")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return the host's L2 cache and TLB information for CPUID.0x80000006
instead of zeroing out the entry as part of KVM_GET_SUPPORTED_CPUID.
This allows a userspace VMM to feed KVM_GET_SUPPORTED_CPUID's output
directly into KVM_SET_CPUID2 (without breaking the guest).
Signed-off-by: Eric Northup (Google) <digitaleric@gmail.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Message-Id: <20200415012320.236065-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_vcpu_ioctl_get_lapic (implements KVM_GET_LAPIC ioctl) does a bulk copy
of the LAPIC registers but must take into account that the one-shot and
periodic timer current count register is computed upon reads and is not
present in register state. When restoring LAPIC state (e.g. after
migration), restart timers from their their current count values at time of
save.
Note: When a one-shot timer expires, the code in arch/x86/kvm/lapic.c does
not zero the value of the LAPIC initial count register (emulating HW
behavior). If no other timer is run and pending prior to a subsequent
KVM_GET_LAPIC call, the returned register set will include the expired
one-shot initial count. On a subsequent KVM_SET_LAPIC call the code will
see a non-zero initial count and start a new one-shot timer using the
expired timer's count. This is a prior existing bug and will be addressed
in a separate patch. Thanks to jmattson@google.com for this find.
Signed-off-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <20181010225653.238911-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function returns no value.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 199cd1d7b5 ("KVM: SVM: Split svm_vcpu_run inline assembly to separate file")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200409114926.1407442-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
__svm_vcpu_run is a leaf function and does not need
a frame pointer. %rbp is also destroyed a few instructions
later when guest registers are loaded.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200409120440.1427215-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix:
arch/x86/kvm/svm/sev.c: In function ‘sev_pin_memory’:
arch/x86/kvm/svm/sev.c:360:3: error: implicit declaration of function ‘release_pages’;\
did you mean ‘reclaim_pages’? [-Werror=implicit-function-declaration]
360 | release_pages(pages, npinned);
| ^~~~~~~~~~~~~
| reclaim_pages
because svm.c includes pagemap.h but the carved out sev.c needs it too.
Triggered by a randconfig build.
Fixes: eaf78265a4 ("KVM: SVM: Move SEV code to separate file")
Signed-off-by: Borislav Petkov <bp@suse.de>
Message-Id: <20200411160927.27954-1-bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
svm_vcpu_run does not change stack or frame pointer anymore.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200414113612.104501-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nested_vmx_exit_reflected() returns a bool, not int. As such, refer to
the return values as true/false in the comment instead of 1/0.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20200414221241.134103-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to SDM 26.6.2, it is possible to inject an MTF VM-exit via the
VM-entry interruption-information field regardless of the 'monitor trap
flag' VM-execution control. KVM appropriately copies the VM-entry
interruption-information field from vmcs12 to vmcs02. However, if L1
has not set the 'monitor trap flag' VM-execution control, KVM fails to
reflect the subsequent MTF VM-exit into L1.
Fix this by consulting the VM-entry interruption-information field of
vmcs12 to determine if L1 has injected the MTF VM-exit. If so, reflect
the exit, regardless of the 'monitor trap flag' VM-execution control.
Fixes: 5f3d45e7f2 ("kvm/x86: add support for MONITOR_TRAP_FLAG")
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200414224746.240324-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason to limit the use of do_machine_check
to 64bit targets. MCE handling works for both target familes.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Fixes: a0861c02a9 ("KVM: Add VT-x machine check support")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200414071414.45636-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Manipulate IF around vmload/vmsave to remove the confusing usage of
local_irq_enable where interrupts are actually disabled via GIF.
And stuff the RSB immediately without waiting for a RET to avoid
Spectre-v2 attacks.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use svm_sev_enabled() in order to cull all calls to PSP code. Otherwise,
compilation fails with undefined symbols if the PSP device driver is compiled
as a module and KVM is not.
Reported-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Two types of #AC can be generated in Intel CPUs:
1. legacy alignment check #AC
2. split lock #AC
Reflect #AC back into the guest if the guest has legacy alignment checks
enabled or if split lock detection is disabled.
If the #AC is not a legacy one and split lock detection is enabled, then
invoke handle_guest_split_lock() which will either warn and disable split
lock detection for this task or force SIGBUS on it.
[ tglx: Switch it to handle_guest_split_lock() and rename the misnamed
helper function. ]
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de
Some bug fixes.
The new vdpa subsystem with two first drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6MS7wPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGp8H/2H49Gya1cfVbGU13qgmBSQqQXC8hS3iNLuG
ltRgU+jafJT//kvkdm3/DUzfK3eRUWUfqZLKEbAQDtMY0OGHi/KGEBYVLDde7Zxt
Lg4VnwBhkYDR/f01ZZDbHxzj9JAr83i28nILjLIqf3a1BX4zf203+ZE0/JM8a7wL
dOPoH7NAfyz5ul2F67bR1IOF8vC6TidpavzR2+HC/MocHYXb6Bgfvt+i4EcrfuMf
9lnBfajgklKr9sNJniwvvR1pWVg+YyG3VeC6T8tIC/xzbCmIoNT+5b3q2XPSIHq1
EuQTeXH9CBFXS0qcFlq2ktR1xd1Lx95hKwZpqLwLFDmfgjhV2QU=
=/84P
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- Some bug fixes
- The new vdpa subsystem with two first drivers
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
vdpa: move to drivers/vdpa
virtio: Intel IFC VF driver for VDPA
vdpasim: vDPA device simulator
vhost: introduce vDPA-based backend
virtio: introduce a vDPA based transport
vDPA: introduce vDPA bus
vringh: IOTLB support
vhost: factor out IOTLB
vhost: allow per device message handler
vhost: refine vhost and vringh kconfig
virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
virtio-net: Introduce hash report feature
virtio-net: Introduce RSS receive steering feature
virtio-net: Introduce extended RSC feature
tools/virtio: option to build an out of tree module
If KVM wasn't used at all before we crash the cleanup procedure fails with
BUG: unable to handle page fault for address: ffffffffffffffc8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 23215067 P4D 23215067 PUD 23217067 PMD 0
Oops: 0000 [#8] SMP PTI
CPU: 0 PID: 3542 Comm: bash Kdump: loaded Tainted: G D 5.6.0-rc2+ #823
RIP: 0010:crash_vmclear_local_loaded_vmcss.cold+0x19/0x51 [kvm_intel]
The root cause is that loaded_vmcss_on_cpu list is not yet initialized,
we initialize it in hardware_enable() but this only happens when we start
a VM.
Previously, we used to have a bitmap with enabled CPUs and that was
preventing [masking] the issue.
Initialized loaded_vmcss_on_cpu list earlier, right before we assign
crash_vmclear_loaded_vmcss pointer. blocked_vcpu_on_cpu list and
blocked_vcpu_on_cpu_lock are moved altogether for consistency.
Fixes: 31603d4fc2 ("KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200401081348.1345307-1-vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Except destination shorthand, a destination value 0xffffffff is used to
broadcast interrupts, let's also filter out this for single target IPI
fastpath.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1585815626-28370-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If nested events are blocked, don't clear the mtf_pending flag to avoid
missing later delivery of the MTF VM-exit.
Fixes: 5ef8acbdd6 ("KVM: nVMX: Emulate MTF when performing instruction emulation")
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20200406201237.178725-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The exception trampoline in .fixup section is not needed, the exception
handling code can jump directly to the label in the .text section.
Changes since v1:
- Fix commit message.
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200406202108.74300-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The compiler (GCC) does not like the situation, where there is inline
assembly block that clobbers all available machine registers in the
middle of the function. This situation can be found in function
svm_vcpu_run in file kvm/svm.c and results in many register spills and
fills to/from stack frame.
This patch fixes the issue with the same approach as was done for
VMX some time ago. The big inline assembly is moved to a separate
assembly .S file, taking into account all ABI requirements.
There are two main benefits of the above approach:
* elimination of several register spills and fills to/from stack
frame, and consequently smaller function .text size. The binary size
of svm_vcpu_run is lowered from 2019 to 1626 bytes.
* more efficient access to a register save array. Currently, register
save array is accessed as:
7b00: 48 8b 98 28 02 00 00 mov 0x228(%rax),%rbx
7b07: 48 8b 88 18 02 00 00 mov 0x218(%rax),%rcx
7b0e: 48 8b 90 20 02 00 00 mov 0x220(%rax),%rdx
and passing ia pointer to a register array as an argument to a function one gets:
12: 48 8b 48 08 mov 0x8(%rax),%rcx
16: 48 8b 50 10 mov 0x10(%rax),%rdx
1a: 48 8b 58 18 mov 0x18(%rax),%rbx
As a result, the total size, considering that the new function size is 229
bytes, gets lowered by 164 bytes.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the SEV specific parts of svm.c into the new sev.c file.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Message-Id: <20200324094154.32352-5-joro@8bytes.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the AVIC related functions from svm.c to the new avic.c file.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Message-Id: <20200324094154.32352-4-joro@8bytes.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split out the code for the nested SVM implementation and move it to a
separate file.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Message-Id: <20200324094154.32352-3-joro@8bytes.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move svm.c and pmu_amd.c into their own arch/x86/kvm/svm/
subdirectory.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Message-Id: <20200324094154.32352-2-joro@8bytes.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
The commit 842f4be958 ("KVM: VMX: Add a trampoline to fix VMREAD error
handling") removed the declaration of vmread_error() causes a W=1 build
failure with KVM_WERROR=y. Fix it by adding it back.
arch/x86/kvm/vmx/vmx.c:359:17: error: no previous prototype for 'vmread_error' [-Werror=missing-prototypes]
asmlinkage void vmread_error(unsigned long field, bool fault)
^~~~~~~~~~~~
Signed-off-by: Qian Cai <cai@lca.pw>
Message-Id: <20200402153955.1695-1-cai@lca.pw>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is
not necessarily for VM since it's a generic userspace and kernel
communication protocol. Such dependency may prevent archs without
virtualization support from using vhost.
To solve this, a dedicated vhost menu is created under drivers so
CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION.
While at it, also squash Kconfig.vringh into vhost Kconfig file. This
avoids the trick of conditional inclusion from VOP or CAIF. Then it
will be easier to introduce new vringh users and common dependency for
both vringh and vhost.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200326140125.19794-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull x86 cleanups from Ingo Molnar:
"This topic tree contains more commits than usual:
- most of it are uaccess cleanups/reorganization by Al
- there's a bunch of prototype declaration (--Wmissing-prototypes)
cleanups
- misc other cleanups all around the map"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/mm/set_memory: Fix -Wmissing-prototypes warnings
x86/efi: Add a prototype for efi_arch_mem_reserve()
x86/mm: Mark setup_emu2phys_nid() static
x86/jump_label: Move 'inline' keyword placement
x86/platform/uv: Add a missing prototype for uv_bau_message_interrupt()
kill uaccess_try()
x86: unsafe_put-style macro for sigmask
x86: x32_setup_rt_frame(): consolidate uaccess areas
x86: __setup_rt_frame(): consolidate uaccess areas
x86: __setup_frame(): consolidate uaccess areas
x86: setup_sigcontext(): list user_access_{begin,end}() into callers
x86: get rid of put_user_try in __setup_rt_frame() (both 32bit and 64bit)
x86: ia32_setup_rt_frame(): consolidate uaccess areas
x86: ia32_setup_frame(): consolidate uaccess areas
x86: ia32_setup_sigcontext(): lift user_access_{begin,end}() into the callers
x86/alternatives: Mark text_poke_loc_init() static
x86/cpu: Fix a -Wmissing-prototypes warning for init_ia32_feat_ctl()
x86/mm: Drop pud_mknotpresent()
x86: Replace setup_irq() by request_irq()
x86/configs: Slightly reduce defconfigs
...
Take the target reg in __cpuid_entry_get_reg() instead of a pointer to a
struct cpuid_reg. When building with -fsanitize=alignment (enabled by
CONFIG_UBSAN=y), some versions of gcc get tripped up on the pointer and
trigger the BUILD_BUG().
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: d8577a4c23 ("KVM: x86: Do host CPUID at load time to mask KVM cpu caps")
Fixes: 4c61534aaa ("KVM: x86: Introduce cpuid_entry_{get,has}() accessors")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200325191259.23559-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a hand coded assembly trampoline to preserve volatile registers
across vmread_error(), and to handle the calling convention differences
between 64-bit and 32-bit due to asmlinkage on vmread_error(). Pass
@field and @fault on the stack when invoking the trampoline to avoid
clobbering volatile registers in the context of the inline assembly.
Calling vmread_error() directly from inline assembly is partially broken
on 64-bit, and completely broken on 32-bit. On 64-bit, it will clobber
%rdi and %rsi (used to pass @field and @fault) and any volatile regs
written by vmread_error(). On 32-bit, asmlinkage means vmread_error()
expects the parameters to be passed on the stack, not via regs.
Opportunistically zero out the result in the trampoline to save a few
bytes of code for every VMREAD. A happy side effect of the trampoline
is that the inline code footprint is reduced by three bytes on 64-bit
due to PUSH/POP being more efficent (in terms of opcode bytes) than MOV.
Fixes: 6e2020977e ("KVM: VMX: Add error handling to VMREAD helper")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200326160712.28803-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tag svm_x86_ops with __initdata now the the struct is copied by value to
a common x86 instance of kvm_x86_ops as part of kvm_init().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-10-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tag vmx_x86_ops with __initdata now the the struct is copied by value to
a common x86 instance of kvm_x86_ops as part of kvm_init().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-9-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the __exit annotation from VMX hardware_unsetup(), the hook
can be reached during kvm_init() by way of kvm_arch_hardware_unsetup()
if failure occurs at various points during initialization.
Removing the annotation also lets us annotate vmx_x86_ops and svm_x86_ops
with __initdata; otherwise, objtool complains because it doesn't
understand that the vendor specific __initdata is being copied by value
to a non-__initdata instance.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-8-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the kvm_x86_ops pointer in common x86 with an instance of the
struct to save one pointer dereference when invoking functions. Copy the
struct by value to set the ops during kvm_init().
Arbitrarily use kvm_x86_ops.hardware_enable to track whether or not the
ops have been initialized, i.e. a vendor KVM module has been loaded.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-7-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set kvm_x86_ops with the vendor's ops only after ->hardware_setup()
completes to "prevent" using kvm_x86_ops before they are ready, i.e. to
generate a null pointer fault instead of silently consuming unconfigured
state.
An alternative implementation would be to have ->hardware_setup()
return the vendor's ops, but that would require non-trivial refactoring,
and would arguably result in less readable code, e.g. ->hardware_setup()
would need to use ERR_PTR() in multiple locations, and each vendor's
declaration of the runtime ops would be less obvious.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-6-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Configure VMX's runtime hooks by modifying vmx_x86_ops directly instead
of using the global kvm_x86_ops. This sets the stage for waiting until
after ->hardware_setup() to set kvm_x86_ops with the vendor's
implementation.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-5-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move VMX's hardware_setup() below its vmx_x86_ops definition so that a
future patch can refactor hardware_setup() to modify vmx_x86_ops
directly instead of indirectly modifying the ops via the global
kvm_x86_ops.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-4-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the kvm_x86_ops functions that are used only within the scope of
kvm_init() into a separate struct, kvm_x86_init_ops. In addition to
identifying the init-only functions without restorting to code comments,
this also sets the stage for waiting until after ->hardware_setup() to
set kvm_x86_ops. Setting kvm_x86_ops after ->hardware_setup() is
desirable as many of the hooks are not usable until ->hardware_setup()
completes.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-3-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass @opaque to kvm_arch_hardware_setup() and
kvm_arch_check_processor_compat() to allow architecture specific code to
reference @opaque without having to stash it away in a temporary global
variable. This will enable x86 to separate its vendor specific callback
ops, which are passed via @opaque, into "init" and "runtime" ops without
having to stash away the "init" ops.
No functional change intended.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which is
necessary to build the vDSO. These new headers are included from the
kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by PPC.
- Cleanup and consolidation of the exit related code in posix CPU timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=5o9G
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping and timer updates from Thomas Gleixner:
"Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which
is necessary to build the vDSO. These new headers are included from
the kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by
PPC.
- Cleanup and consolidation of the exit related code in posix CPU
timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the
place"
* tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
Revert "clocksource/drivers/timer-probe: Avoid creating dead devices"
vdso: Fix clocksource.h macro detection
um: Fix header inclusion
arm64: vdso32: Enable Clang Compilation
lib/vdso: Enable common headers
arm: vdso: Enable arm to use common headers
x86/vdso: Enable x86 to use common headers
mips: vdso: Enable mips to use common headers
arm64: vdso32: Include common headers in the vdso library
arm64: vdso: Include common headers in the vdso library
arm64: Introduce asm/vdso/processor.h
arm64: vdso32: Code clean up
linux/elfnote.h: Replace elf.h with UAPI equivalent
scripts: Fix the inclusion order in modpost
common: Introduce processor.h
linux/ktime.h: Extract common header for vDSO
linux/jiffies.h: Extract common header for vDSO
linux/time64.h: Extract common header for vDSO
linux/time32.h: Extract common header for vDSO
linux/time.h: Extract common header for vDSO
...
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
Delay read msr data until we identify guest accesses ICR MSR to avoid
to penalize all other MSR writes.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1585189202-1708-2-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The original single target IPI fastpath patch forgot to filter the
ICR destination shorthand field. Multicast IPI is not suitable for
this feature since wakeup the multiple sleeping vCPUs will extend
the interrupt disabled time, it especially worse in the over-subscribe
and VM has a little bit more vCPUs scenario. Let's narrow it down to
single target IPI.
Two VMs, each is 76 vCPUs, one running 'ebizzy -M', the other
running cyclictest on all vCPUs, w/ this patch, the avg score
of cyclictest can improve more than 5%. (pv tlb, pv ipi, pv
sched yield are disabled during testing to avoid the disturb).
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1585189202-1708-3-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131509.136884777@linutronix.de
There is no reason that this gunk is in a generic header file. The wildcard
defines need to stay as they are required by file2alias.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131508.736205164@linutronix.de
The timer is disarmed when switching between TSC deadline and other modes,
we should set everything to disarmed state, however, LAPIC timer can be
emulated by preemption timer, it still works if vmx->hv_deadline_timer is
not -1. This patch also cancels preemption timer when disarm LAPIC timer.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1585031530-19823-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gracefully handle faults on VMXON, e.g. #GP due to VMX being disabled by
BIOS, instead of letting the fault crash the system. Now that KVM uses
cpufeatures to query support instead of reading MSR_IA32_FEAT_CTL
directly, it's possible for a bug in a different subsystem to cause KVM
to incorrectly attempt VMXON[*]. Crashing the system is especially
annoying if the system is configured such that hardware_enable() will
be triggered during boot.
Oppurtunistically rename @addr to @vmxon_pointer and use a named param
to reference it in the inline assembly.
Print 0xdeadbeef in the ultra-"rare" case that reading MSR_IA32_FEAT_CTL
also faults.
[*] https://lkml.kernel.org/r/20200226231615.13664-1-sean.j.christopherson@intel.com
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321193751.24985-4-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Subsume loaded_vmcs_init() into alloc_loaded_vmcs(), its only remaining
caller, and drop the VMCLEAR on the shadow VMCS, which is guaranteed to
be NULL. loaded_vmcs_init() was previously used by loaded_vmcs_clear(),
but loaded_vmcs_clear() also subsumed loaded_vmcs_init() to properly
handle smp_wmb() with respect to VMCLEAR.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321193751.24985-3-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMCLEAR all in-use VMCSes during a crash, even if kdump's NMI shootdown
interrupted a KVM update of the percpu in-use VMCS list.
Because NMIs are not blocked by disabling IRQs, it's possible that
crash_vmclear_local_loaded_vmcss() could be called while the percpu list
of VMCSes is being modified, e.g. in the middle of list_add() in
vmx_vcpu_load_vmcs(). This potential corner case was called out in the
original commit[*], but the analysis of its impact was wrong.
Skipping the VMCLEARs is wrong because it all but guarantees that a
loaded, and therefore cached, VMCS will live across kexec and corrupt
memory in the new kernel. Corruption will occur because the CPU's VMCS
cache is non-coherent, i.e. not snooped, and so the writeback of VMCS
memory on its eviction will overwrite random memory in the new kernel.
The VMCS will live because the NMI shootdown also disables VMX, i.e. the
in-progress VMCLEAR will #UD, and existing Intel CPUs do not flush the
VMCS cache on VMXOFF.
Furthermore, interrupting list_add() and list_del() is safe due to
crash_vmclear_local_loaded_vmcss() using forward iteration. list_add()
ensures the new entry is not visible to forward iteration unless the
entire add completes, via WRITE_ONCE(prev->next, new). A bad "prev"
pointer could be observed if the NMI shootdown interrupted list_del() or
list_add(), but list_for_each_entry() does not consume ->prev.
In addition to removing the temporary disabling of VMCLEAR, open code
loaded_vmcs_init() in __loaded_vmcs_clear() and reorder VMCLEAR so that
the VMCS is deleted from the list only after it's been VMCLEAR'd.
Deleting the VMCS before VMCLEAR would allow a race where the NMI
shootdown could arrive between list_del() and vmcs_clear() and thus
neither flow would execute a successful VMCLEAR. Alternatively, more
code could be moved into loaded_vmcs_init(), but that gets rather silly
as the only other user, alloc_loaded_vmcs(), doesn't need the smp_wmb()
and would need to work around the list_del().
Update the smp_*() comments related to the list manipulation, and
opportunistically reword them to improve clarity.
[*] https://patchwork.kernel.org/patch/1675731/#3720461
Fixes: 8f536b7697 ("KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321193751.24985-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For CPU supporting fast short REP MOV (XF86_FEATURE_FSRM) e.g Icelake,
Tigerlake, expose it in KVM supported cpuid as well.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Message-Id: <20200323092236.3703-1-zhenyuw@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
THUNK_TARGET defines [thunk_target] as having "rm" input constraints
when CONFIG_RETPOLINE is not set, which isn't constrained enough for
this specific case.
For inline assembly that modifies the stack pointer before using this
input, the underspecification of constraints is dangerous, and results
in an indirect call to a previously pushed flags register.
In this case `entry`'s stack slot is good enough to satisfy the "m"
constraint in "rm", but the inline assembly in
handle_external_interrupt_irqoff() modifies the stack pointer via
push+pushf before using this input, which in this case results in
calling what was the previous state of the flags register, rather than
`entry`.
Be more specific in the constraints by requiring `entry` be in a
register, and not a memory operand.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+3f29ca2efb056a761e38@syzkaller.appspotmail.com
Debugged-by: Alexander Potapenko <glider@google.com>
Debugged-by: Paolo Bonzini <pbonzini@redhat.com>
Debugged-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Message-Id: <20200323191243.30002-1-ndesaulniers@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, CLFLUSH is used to flush SEV guest memory before the guest is
terminated (or a memory hotplug region is removed). However, CLFLUSH is
not enough to ensure that SEV guest tagged data is flushed from the cache.
With 33af3a7ef9 ("KVM: SVM: Reduce WBINVD/DF_FLUSH invocations"), the
original WBINVD was removed. This then exposed crashes at random times
because of a cache flush race with a page that had both a hypervisor and
a guest tag in the cache.
Restore the WBINVD when destroying an SEV guest and add a WBINVD to the
svm_unregister_enc_region() function to ensure hotplug memory is flushed
when removed. The DF_FLUSH can still be avoided at this point.
Fixes: 33af3a7ef9 ("KVM: SVM: Reduce WBINVD/DF_FLUSH invocations")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <c8bf9087ca3711c5770bdeaafa3e45b717dc5ef4.1584720426.git.thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Userspace has no way to query if SEV has been disabled with the
sev module parameter of kvm-amd.ko. Actually it has one, but it
is a hack: do ioctl(KVM_MEM_ENCRYPT_OP, NULL) and check if it
returns EFAULT. Make it a little nicer by returning zero for
SEV enabled and NULL argument, and while at it document the
ioctl arguments.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The WARN_ON is essentially comparing a user-provided value with 0. It is
trivial to trigger it just by passing garbage to KVM_SET_CLOCK. Guests
can break if you do so, but the same applies to every KVM_SET_* ioctl.
So, if it hurts when you do like this, just do not do it.
Reported-by: syzbot+00be5da1d75f1cc95f6b@syzkaller.appspotmail.com
Fixes: 9446e6fce0 ("KVM: x86: fix WARN_ON check of an unsigned less than zero")
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In kvm_arch_dev_ioctl(), the brackets of case KVM_X86_GET_MCE_CAP_SUPPORTED
accidently encapsulates case KVM_GET_MSR_FEATURE_INDEX_LIST and case
KVM_GET_MSRS. It doesn't affect functionality but it's misleading.
Remove unnecessary brackets and opportunistically add a "break" in the
default path.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tack on "used max basic" at the end of the CPUID tracepoint when the
output values correspond to the max basic leaf, i.e. when emulating
Intel's out-of-range CPUID behavior. Observing "cpuid entry not found"
in the tracepoint with non-zero output values is confusing for users
that aren't familiar with the out-of-range semantics, and qualifying the
"not found" case hopefully makes it clear that "found" means "found the
exact entry".
Suggested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Output the requested index when tracing CPUID emulation; it's basically
mandatory for leafs where the index is meaningful, and is helpful for
verifying KVM correctness even when the index isn't meaningful, e.g. the
trace for a Linux guest's hypervisor_cpuid_base() probing appears to
be broken (returns all zeroes) at first glance, but is correct because
the index is non-zero, i.e. the output values correspond to a random
index in the maximum basic leaf.
Suggested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
EFER is set for L2 using svm_set_efer, which hardcodes EFER_SVME to 1 and hides
an incorrect value for EFER.SVME in the L1 VMCB. Perform the check manually
to detect invalid guest state.
Reported-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On Tigerlake new AVX512 VP2INTERSECT feature is available.
This allows to expose it via KVM_GET_SUPPORTED_CPUID.
Cc: "Zhong, Yang" <yang.zhong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The name of nested_vmx_exit_reflected suggests that it's purely
a test, but it actually marks VMCS12 pages as dirty. Move this to
vmx_handle_exit, observing that the initial nested_run_pending check in
nested_vmx_exit_reflected is pointless---nested_run_pending has just
been cleared in vmx_vcpu_run and won't be set until handle_vmlaunch
or handle_vmresume.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Registers in "regs" array are indexed as rax/rcx/rdx/.../rsi/rdi/r8/...
Reorder access to "regs" array in vmenter.S to follow its natural order.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nested_vmx_handle_enlightened_vmptrld() fails in two cases:
- when we fail to kvm_vcpu_map() the supplied GPA
- when revision_id is incorrect.
Genuine Hyper-V raises #UD in the former case (at least with *some*
incorrect GPAs) and does VMfailInvalid() in the later. KVM doesn't do
anything so L1 just gets stuck retrying the same faulty VMLAUNCH.
nested_vmx_handle_enlightened_vmptrld() has two call sites:
nested_vmx_run() and nested_get_vmcs12_pages(). The former needs to queue
do much: the failure there happens after migration when L2 was running (and
L1 did something weird like wrote to VP assist page from a different vCPU),
just kill L1 with KVM_EXIT_INTERNAL_ERROR.
Reported-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
[Squash kbuild autopatch. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When vmx_set_nested_state() happens, we may not have all the required
data to map enlightened VMCS: e.g. HV_X64_MSR_VP_ASSIST_PAGE MSR may not
yet be restored so we need a postponed action. Currently, we (ab)use
need_vmcs12_to_shadow_sync/nested_sync_vmcs12_to_shadow() for that but
this is not ideal:
- We may not need to sync anything if L2 is running
- It is hard to propagate errors from nested_sync_vmcs12_to_shadow()
as we call it from vmx_prepare_switch_to_guest() which happens just
before we do VMLAUNCH, the code is not ready to handle errors there.
Move eVMCS mapping to nested_get_vmcs12_pages() and request
KVM_REQ_GET_VMCS12_PAGES, it seems to be is less abusive in nature.
It would probably be possible to introduce a specialized KVM_REQ_EVMCS_MAP
but it is undesirable to propagate eVMCS specifics all the way up to x86.c
Note, we don't need to request KVM_REQ_GET_VMCS12_PAGES from
vmx_set_nested_state() directly as nested_vmx_enter_non_root_mode() already
does that. Requesting KVM_REQ_GET_VMCS12_PAGES is done to document the
(non-obvious) side-effect and to be future proof.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After test_and_set_bit() for kvm->arch.apicv_inhibit_reasons, we will
always get false when calling kvm_apicv_activated() because it's sure
apicv_inhibit_reasons do not equal to 0.
What the code wants to do, is check whether APICv was *already* active
and if so skip the costly request; we can do this using cmpxchg.
Reported-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit 5ef8acbdd6 ("KVM: nVMX: Emulate MTF when performing
instruction emulation") introduced a helper to check the MTF
VM-execution control in vmcs12. Change pre-existing check in
nested_vmx_exit_reflected() to instead use the helper.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PMU is not exposed to guest by most of products from cloud providers since the
bad performance of PMU emulation and security concern. However, it calls
perf_guest_switch_get_msrs() and clear_atomic_switch_msr() unconditionally
even if PMU is not exposed to the guest before each vmentry.
~2% vmexit time reduced can be observed by kvm-unit-tests/vmexit.flat on my
SKX server.
Before patch:
vmcall 1559
After patch:
vmcall 1529
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GA Log tracepoint is useful when debugging AVIC performance
issue as it can be used with perf to count the number of times
IOMMU AVIC injects interrupts through the slow-path instead of
directly inject interrupts to the target vcpu.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch reproduces for nSVM the change that was made for nVMX in
commit b5861e5cf2 ("KVM: nVMX: Fix loss of pending IRQ/NMI before
entering L2"). While I do not have a test that breaks without it, I
cannot see why it would not be necessary since all events are unblocked
by VMRUN's setting of GIF back to 1.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current implementation of physical interrupt delivery to a nested guest
is quite broken. It relies on svm_interrupt_allowed returning false if
VINTR=1 so that the interrupt can be injected from enable_irq_window,
but this does not work for guests that do not intercept HLT or that rely
on clearing the host IF to block physical interrupts while L2 runs.
This patch can be split in two logical parts, but including only
one breaks tests so I am combining both changes together.
The first and easiest is simply to return true for svm_interrupt_allowed
if HF_VINTR_MASK is set and HIF is set. This way the semantics of
svm_interrupt_allowed are respected: svm_interrupt_allowed being false
does not mean "call enable_irq_window", it means "interrupts cannot
be injected now".
After doing this, however, we need another place to inject the
interrupt, and fortunately we already have one, check_nested_events,
which nested SVM does not implement but which is meant exactly for this
purpose. It is called before interrupts are injected, and it can
therefore do the L2->L1 switch while leaving inject_pending_event
none the wiser.
This patch was developed together with Cathy Avery, who wrote the
test and did a lot of the initial debugging.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a nested VM is started while an IRQ was pending and with
V_INTR_MASKING=1, the behavior of the guest depends on host IF. If it
is 1, the VM should exit immediately, before executing the first
instruction of the guest, because VMRUN sets GIF back to 1.
If it is 0 and the host has VGIF, however, at the time of the VMRUN
instruction L0 is running the guest with a pending interrupt window
request. This interrupt window request is completely irrelevant to
L2, since IF only controls virtual interrupts, so this patch drops
INTERCEPT_VINTR from the VMCB while running L2 under these circumstances.
To simplify the code, both steps of enabling the interrupt window
(setting the VINTR intercept and requesting a fake virtual interrupt
in svm_inject_irq) are grouped in the svm_set_vintr function, and
likewise for dismissing the interrupt window request in svm_clear_vintr.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of touching the host intercepts so that the bitwise OR in
recalc_intercepts just works, mask away uninteresting intercepts
directly in recalc_intercepts.
This is cleaner and keeps the logic in one place even for intercepts
that can change even while L2 is running.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The set_cr3 callback is not setting the guest CR3, it is setting the
root of the guest page tables, either shadow or two-dimensional.
To make this clearer as well as to indicate that the MMU calls it
via kvm_mmu_load_cr3, rename it to load_mmu_pgd.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to what kvm-intel.ko is doing, provide a single callback that
merges svm_set_cr3, set_tdp_cr3 and nested_svm_set_tdp_cr3.
This lets us unify the set_cr3 and set_tdp_cr3 entries in kvm_x86_ops.
I'm doing that in this same patch because splitting it adds quite a bit
of churn due to the need for forward declarations. For the same reason
the assignment to vcpu->arch.mmu->set_cr3 is moved to kvm_init_shadow_mmu
from init_kvm_softmmu and nested_svm_init_mmu_context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invert and rename the kvm_cpuid() param that controls out-of-range logic
to better reflect the semantics of the affected callers, i.e. callers
that bypass the out-of-range logic do so because they are looking up an
exact guest CPUID entry, e.g. to query the maxphyaddr.
Similarly, rename kvm_cpuid()'s internal "found" to "exact" to clarify
that it tracks whether or not the exact requested leaf was found, as
opposed to any usable leaf being found.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move all of the out-of-range logic into a single helper,
get_out_of_range_cpuid_entry(), to avoid an extra lookup of CPUID.0.0
and to provide a single location for documenting the out-of-range
behavior.
No functional change intended.
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the masking in the out-of-range CPUID logic to handle the
Hypervisor sub-classes, as well as the Centaur class if the guest
virtual CPU vendor is Centaur.
Masking against 0x80000000 only handles basic and extended leafs, which
results in Hypervisor range checks being performed against the basic
CPUID class, and Centuar range checks being performed against the
Extended class. E.g. if CPUID.0x40000000.EAX returns 0x4000000A and
there is no entry for CPUID.0x40000006, then function 0x40000006 would
be incorrectly reported as out of bounds.
While there is no official definition of what constitutes a class, the
convention established for Hypervisor classes effectively uses bits 31:8
as the mask by virtue of checking for different bases in increments of
0x100, e.g. KVM advertises its CPUID functions starting at 0x40000100
when HyperV features are advertised at the default base of 0x40000000.
The bad range check doesn't cause functional problems for any known VMM
because out-of-range semantics only come into play if the exact entry
isn't found, and VMMs either support a very limited Hypervisor range,
e.g. the official KVM range is 0x40000000-0x40000001 (effectively no
room for undefined leafs) or explicitly defines gaps to be zero, e.g.
Qemu explicitly creates zeroed entries up to the Centaur and Hypervisor
limits (the latter comes into play when providing HyperV features).
The bad behavior can be visually confirmed by dumping CPUID output in
the guest when running Qemu with a stable TSC, as Qemu extends the limit
of range 0x40000000 to 0x40000010 to advertise VMware's cpuid_freq,
without defining zeroed entries for 0x40000002 - 0x4000000f.
Note, documentation of Centaur/VIA CPUs is hard to come by. Designating
0xc0000000 - 0xcfffffff as the Centaur class is a best guess as to the
behavior of a real Centaur/VIA CPU.
Fixes: 43561123ab ("kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH")
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend guest_cpuid_is_amd() to cover Hygon virtual CPUs and rename it
accordingly. Hygon CPUs use an AMD-based core and so have the same
basic behavior as AMD CPUs.
Fixes: b8f4abb652 ("x86/kvm: Add Hygon Dhyana support to KVM")
Cc: Pu Wen <puwen@hygon.cn>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to provide CPUID-based guest vendor checks, i.e. to do the
ugly register comparisons. Use the new helpers to check for an AMD
guest vendor in guest_cpuid_is_amd() as well as in the existing emulator
flows.
Using the new helpers fixes a _very_ theoretical bug where
guest_cpuid_is_amd() would get a false positive on a non-AMD virtual CPU
with a vendor string beginning with "Auth" due to the previous logic
only checking EBX. It also fixes a marginally less theoretically bug
where guest_cpuid_is_amd() would incorrectly return false for a guest
CPU with "AMDisbetter!" as its vendor string.
Fixes: a0c0feb579 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Trace the requested CPUID function instead of the effective function,
e.g. if the requested function is out-of-range and KVM is emulating an
Intel CPU, as the intent of the tracepoint is to show if the output came
from the actual leaf as opposed to the max basic leaf via redirection.
Similarly, leave "found" as is, i.e. report that an entry was found if
and only if the requested entry was found.
Fixes: 43561123ab ("kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[Sean: Drop "found" semantic change, reword changelong accordingly ]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current CPUID 0xd enumeration code does not support supervisor
states, because KVM only supports setting IA32_XSS to zero.
Change it instead to use a new variable supported_xss, to be
set from the hardware_setup callback which is in charge of CPU
capabilities.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle CPUID 0x8000000A in the main switch in __do_cpuid_func() and drop
->set_supported_cpuid() now that both VMX and SVM implementations are
empty. Like leaf 0x14 (Intel PT) and leaf 0x8000001F (SEV), leaf
0x8000000A is is (obviously) vendor specific but can be queried in
common code while respecting SVM's wishes by querying kvm_cpu_cap_has().
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set NRIPS in KVM capabilities if and only if nrips=true, which naturally
incorporates the boot_cpu_has() check, and set nrips_enabled only if the
KVM capability is enabled.
Note, previously KVM would set nrips_enabled based purely on userspace
input, but at worst that would cause KVM to propagate garbage into L1,
i.e. userspace would simply be hosing its VM.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set SVM feature bits in KVM capabilities if and only if nested=true, KVM
shouldn't advertise features that realistically can't be used. Use
kvm_cpu_cap_has(X86_FEATURE_SVM) to indirectly query "nested" in
svm_set_supported_cpuid() in anticipation of moving CPUID 0x8000000A
adjustments into common x86 code.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move host_efer to common x86 code and use it for CPUID's is_efer_nx() to
avoid constantly re-reading the MSR.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop largepages_enabled, kvm_largepages_enabled() and
kvm_disable_largepages() now that all users are gone.
Note, largepages_enabled was an x86-only flag that got left in common
KVM code when KVM gained support for multiple architectures.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop propagating MMU large page support into a memslot's disallow_lpage
now that the MMU's max_page_level handles the scenario where VMX's EPT is
enabled and EPT doesn't support 2M pages.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Configure the max page level during hardware setup to avoid a retpoline
in the page fault handler. Drop ->get_lpage_level() as the page fault
handler was the last user.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Combine kvm_enable_tdp() and kvm_disable_tdp() into a single function,
kvm_configure_mmu(), in preparation for doing additional configuration
during hardware setup. And because having separate helpers is silly.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
