Commit Graph

1970 Commits

Author SHA1 Message Date
Ralf Baechle
9cdf30bd3b MIPS: Fix cpu_has_mips_r2_exec_hazard.
Returns a non-zero value if the current processor implementation requires
an IHB instruction to deal with an instruction hazard as per MIPS R2
architecture specification, zero otherwise.

For a discussion, see http://patchwork.linux-mips.org/patch/9539/.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-10 15:41:47 +02:00
Markos Chandras
518222161d MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case
Commit 5753762cbd1c("MIPS: asm: spinlock: Replace "sub" instruction
with "addiu") replaced the "sub" instruction with addiu but it did
not update the immediate value in the R10000_LLSC_WAR case.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: 5753762cbd1c("MIPS: asm: spinlock: Replace "sub" instruction with "addiu"")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9385/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-10 15:41:46 +02:00
Markos Chandras
f6b39ae6f4 MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes
Commit 934c79231c1b("MIPS: asm: r4kcache: Add MIPS R6 cache unroll
functions") added support for MIPS R6 cache flushes but it used the
wrong base address register to perform the flushes so the same lines
were flushed over and over. Moreover, replace the "addiu" instructions
with LONG_ADDIU so the correct base address is calculated for 64-bit
cores.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: 934c79231c1b("MIPS: asm: r4kcache: Add MIPS R6 cache unroll functions")
Cc: linux-mips@linux-mips.org
Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9384/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-10 15:41:46 +02:00
Markos Chandras
60cd7e08e4 MIPS: asm: asm-eva: Introduce kernel load/store variants
Introduce new macros for kernel load/store variants which will be
used to perform regular kernel space load/store operations in EVA
mode.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9500/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-10 15:41:43 +02:00
Alexander Sverdlin
73bf3c2a50 MIPS: Octeon: Remove udelay() causing huge IRQ latency
udelay() in PCI/PCIe read/write callbacks cause 30ms IRQ latency on Octeon
platforms because these operations are called from PCI_OP_READ() and
PCI_OP_WRITE() under raw_spin_lock_irqsave().

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: linux-mips@linux-mips.org
Cc: David Daney <ddaney@cavium.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mathias <mathias.rulf@nokia.com>
Patchwork: https://patchwork.linux-mips.org/patch/9576/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-10 15:41:42 +02:00
Lars Persson
4d46a67a3e MIPS: Fix race condition in lazy cache flushing.
The lazy cache flushing implemented in the MIPS kernel suffers from a
race condition that is exposed by do_set_pte() in mm/memory.c.

A pre-condition is a file-system that writes to the page from the CPU
in its readpage method and then calls flush_dcache_page(). One example
is ubifs. Another pre-condition is that the dcache flush is postponed
in __flush_dcache_page().

Upon a page fault for an executable mapping not existing in the
page-cache, the following will happen:
1. Write to the page
2. flush_dcache_page
3. flush_icache_page
4. set_pte_at
5. update_mmu_cache (commits the flush of a dcache-dirty page)

Between steps 4 and 5 another thread can hit the same page and it will
encounter a valid pte. Because the data still is in the L1 dcache the CPU
will fetch stale data from L2 into the icache and execute garbage.

This fix moves the commit of the cache flush to step 3 to close the
race window. It also reduces the amount of flushes on non-executable
mappings because we never enter __flush_dcache_page() for non-aliasing
CPUs.

Regressions can occur in drivers that mistakenly relies on the
flush_dcache_page() in get_user_pages() for DMA operations.

[ralf@linux-mips.org: Folded in patch 9346 to fix highmem issue.]

Signed-off-by: Lars Persson <larper@axis.com>
Cc: linux-mips@linux-mips.org
Cc: paul.burton@imgtec.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9346/
Patchwork: https://patchwork.linux-mips.org/patch/9738/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-25 13:48:00 +01:00
Lars Persson
5b9593f3bc Revert "MIPS: Remove race window in page fault handling"
Revert commit 2a4a8b1e5d ("MIPS: Remove race window in page fault
handling") because it increased the number of flushed dcache pages and
became a performance problem for some workloads.

Signed-off-by: Lars Persson <larper@axis.com>
Cc: linux-mips@linux-mips.org
Cc: paul.burton@imgtec.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9345/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-25 13:48:00 +01:00
Chandrakala Chavva
9a49899eb8 MIPS: OCTEON: Use correct CSR to soft reset
Also delete unused cvmx_reset_octeon()
This fixes reboot for Octeon III boards

Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/9471/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-25 13:47:59 +01:00
Steven J. Hill
c5b367835c MIPS: Add support for XPA.
Add support for extended physical addressing (XPA) so that
32-bit platforms can access equal to or greater than 40 bits
of physical addresses.

NOTE:
      1) XPA and EVA are not the same and cannot be used
         simultaneously.
      2) If you configure your kernel for XPA, the PTEs
         and all address sizes become 64-bit.
      3) Your platform MUST have working HIGHMEM support.

Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9355/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-19 17:39:49 +01:00
Steven J. Hill
be0c37c985 MIPS: Rearrange PTE bits into fixed positions.
This patch rearranges the PTE bits into fixed positions for R2
and later cores. In the past, the TLB handling code did runtime
checking of RI/XI and adjusted the shifts and rotates in order
to fit the largest PFN value into the PTE. The checking now
occurs when building the TLB handler, thus eliminating those
checks. These new arrangements also define the largest possible
PFN value that can fit in the PTE. HUGE page support is only
available for 64-bit cores. Layouts of the PTE bits are now:

   64-bit, R1 or earlier:     CCC D V G [S H] M A W R P
   32-bit, R1 or earler:      CCC D V G M A W R P
   64-bit, R2 or later:       CCC D V G RI/R XI [S H] M A W P
   32-bit, R2 or later:       CCC D V G RI/R XI M A W P

[ralf@linux-mips.org: Fix another build error *rant* *rant*]

Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9353/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-18 16:19:35 +01:00
Linus Torvalds
a135c717d5 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS:

   - a number of fixes that didn't make the 3.19 release.

   - a number of cleanups.

   - preliminary support for Cavium's Octeon 3 SOCs which feature up to
     48 MIPS64 R3 cores with FPU and hardware virtualization.

   - support for MIPS R6 processors.

     Revision 6 of the MIPS architecture is a major revision of the MIPS
     architecture which does away with many of original sins of the
     architecture such as branch delay slots.  This and other changes in
     R6 require major changes throughout the entire MIPS core
     architecture code and make up for the lion share of this pull
     request.

   - finally some preparatory work for eXtendend Physical Address
     support, which allows support of up to 40 bit of physical address
     space on 32 bit processors"

     [ Ahh, MIPS can't leave the PAE brain damage alone.  It's like
       every CPU architect has to make that mistake, but pee in the snow
       by changing the TLA.  But whether it's called PAE, LPAE or XPA,
       it's horrid crud   - Linus ]

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits)
  MIPS: sead3: Corrected get_c0_perfcount_int
  MIPS: mm: Remove dead macro definitions
  MIPS: OCTEON: irq: add CIB and other fixes
  MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs.
  MIPS: OCTEON: More OCTEONIII support
  MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits.
  MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup.
  MIPS: OCTEON: Update octeon-model.h code for new SoCs.
  MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX
  MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h
  MIPS: OCTEON: Implement the core-16057 workaround
  MIPS: OCTEON: Delete unused COP2 saving code
  MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register
  MIPS: OCTEON: Save and restore CP2 SHA3 state
  MIPS: OCTEON: Fix FP context save.
  MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs
  MIPS: boot: Provide more uImage options
  MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h
  MIPS: ip22-gio: Remove legacy suspend/resume support
  mips: pci: Add ifdef around pci_proc_domain
  ...
2015-02-21 19:41:38 -08:00
Chandrakala Chavva
ac6d9b3a03 MIPS: OCTEON: More OCTEONIII support
Read clock rate from the correct CSR. Don't clear COP0_DCACHE for OCTEONIII.

Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8945/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:32:46 +01:00
Chad Reese
920cda3870 MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits.
CN38XX pass 1 required icache prefetching to be turned off. This chip never
reached production and is long dead. Other processor specific icache settings
are done by the bootloader. Remove these bits from the kernel.

Signed-off-by: Chad Reese <kreese@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/8944/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:32:22 +01:00
David Daney
726da2f82a MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8943/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:31:59 +01:00
David Daney
debe6a623d MIPS: OCTEON: Update octeon-model.h code for new SoCs.
Add coverage for OCTEON III models.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8942/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:31:43 +01:00
David Daney
e3d0ead59f MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX
Make messages refer to all CN6XXX.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8941/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:31:27 +01:00
David Daney
664f1ae53d MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h
Also update union octeon_cvmemctl with new OCTEON II fields.

[aleksey.makarov@auriga.com: use __BITFIELD_FIELD]

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8940/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:31:07 +01:00
David Daney
664d699af2 MIPS: OCTEON: Implement the core-16057 workaround
Disable ICache prefetch for certian Octeon II processors.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8938/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:30:42 +01:00
David Daney
6b3a287e63 MIPS: OCTEON: Save and restore CP2 SHA3 state
Allocate new save space, and then save/restore the registers if
OCTEON III.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8935/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:29:08 +01:00
David Daney
ac655fb762 MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs
The wide multiplier is twice as wide, so we need to save twice as much
state.  Detect the multiplier type (CPU type) at start up and install
model specific handlers.

[aleksey.makarov@auriga.com:
	conflict resolution,
	support for old compilers]

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Leonid Rosenboim <lrosenboim@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8933/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 15:28:29 +01:00
David Daney
151f9148d1 MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8737/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 14:14:52 +01:00
Lars-Peter Clausen
fa75da8ecd MIPS: ip22-gio: Remove legacy suspend/resume support
There are currently no gio device drivers that implement suspend/resume
and this patch removes the bus specific legacy suspend and resume callbacks.
This will allow us to eventually remove struct bus_type legacy suspend and
resume support altogether.

gio device drivers wanting to implement suspend and resume can use dev PM
ops which will work out of the box without further modifications necessary.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8920/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 13:30:55 +01:00
Zubair Lutfullah Kakakhel
6fb8a163fc mips: pci: Add ifdef around pci_proc_domain
Without these, there are multiple definitions of pci_proc_domain()
and pci_domain_nr() if linux/pci.h and asm/pci.h are included.

Add #ifdefs around them

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Cc: Markos.Chandras@imgtec.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8670/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 13:16:14 +01:00
Steven J. Hill
a5770df095 MIPS: Add set/clear CP0 macros for PageGrain register
Build set and clear macros for the PageGrain register.

Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9289/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20 12:55:18 +01:00
Steven J. Hill
05f9883a28 MIPS: Usage and cosmetic cleanups of page table bits.
* Clean up white spaces and tabs.
   * Get rid of remaining hardcoded values for calculating
     shifts and masks.
   * Get rid of redundant macro values.
   * Do not use page table bits directly in #ifdef's.

Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9287/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19 22:15:59 +01:00
Ralf Baechle
661af35e5f Merge branch 'mipsr6-for-3.20' of git://git.linux-mips.org/pub/scm/mchandras/linux into mips-for-linux-next 2015-02-19 16:00:34 +01:00
Petr Malat
8cb48fe169 MIPS: Provide correct siginfo_t.si_stime
Provide correct siginfo_t.si_stime on MIPS64

Bug description:
MIPS version of copy_siginfo() is not aware of alignment on platforms with
64-bit long integers, which leads to an incorrect si_stime passed to signal
handlers, because the last element (si_stime) of _sifields._sigchld is not
copied. If _MIPS_SZLONG is 64, then the _sifields starts at the offset of
4 * sizeof(int).

Patch description:
Use the generic copy_siginfo, which doesn't have this problem.

Signed-off-by: Petr Malat <oss@malat.biz>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8671/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19 13:47:46 +01:00
Linus Torvalds
402521b8f7 MTD updates for 3.20-rc1
NAND:
 
  * Add new Hisilicon NAND driver for Hip04
  * Add default reboot handler, to ensure all outstanding erase transactions
    complete in time
  * jz4740: convert to use GPIO descriptor API
  * Atmel: add support for sama5d4
  * Change default bitflip threshold to 75% of correction strength
  * Miscellaneous cleanups and bugfixes
 
 SPI NOR:
 
  * Freescale QuadSPI:
    - Fix a few probe() and remove() issues
    - Add a MAINTAINERS entry for this driver
    - Tweak transfer size to increase read performance
    - Add suspend/resume support
  * Add Micron quad I/O support
  * ST FSM SPI: miscellaneous fixes
 
 JFFS2:
 
  * gracefully handle corrupted 'offset' field found on flash
 
 Other:
 
  * bcm47xxpart: add tweaks for a few new devices
  * mtdconcat: set return lengths properly for mtd_write_oob()
  * map_ram: enable use with mtdoops
  * maps: support fallback to ROM/UBI for write-protected NOR flash
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4qf2AAoJEFySrpd9RFgtmo4P/i7KD+Xx12SgBbO+ZUCqBJhh
 X+gorTFr0YpItdn53i1PA8t+WnnXi4BHY07Y8fCj/JL+lxzS+00156o+hsYAFWIl
 TVvjlFHxUYS/rh7plshd5kbEZunlXBOpWw2Qr4dSoIIuOChaRDm9eGNHJ75D/ImO
 Cr+83cyYAm0F+fCHavZKHUq/iFmpDcrt3vbPx/Rv51W+rs/HqPPUcKxt4iaL5Thk
 R0pkcaZHfJ+pkXfjkgRu/L35RLRVxRkycYvLlVSOyE/KqnzE1RRgFeHUYUiPeCem
 xUEoI0OqIYlR5LuKTt/NsBtz1W0Kcm3AcQDC5QliKnbGCwm9nbHAjqfraaZ4Ks2Z
 4YL/2pJCyJFT6NPjsiwiYkJOzJHvN8tLCSIQrXCtAKAkMn8YMHvWIEC/bVsAkpVq
 V3ke3gmZ8bY7sXyY+Fi5WVW4uxKCwSVtGiAw3i74v3z5hZZ818hkbtPc1J0CANiE
 iqbkLMJ5pvWuVT9V2qGlDqK1MDqNXNLXZgBfT9tJx/q5Ptitva79Ift4teRwery2
 5pD3uSaA3vJE2AGHKPfIyTDFqdDDUDCOWJIGbIKsYoKXSAmuOxuWKEhRMWeZMmjo
 o0ZOrhJqBNp4ZqvAxUddUOsGhRKNa3btPoB+IhAQG4+OBwxknsAY39BzPcBjKrkG
 iEKHgRDXXMe8W2wCalLw
 =+nRk
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND:

   - Add new Hisilicon NAND driver for Hip04
   - Add default reboot handler, to ensure all outstanding erase
     transactions complete in time
   - jz4740: convert to use GPIO descriptor API
   - Atmel: add support for sama5d4
   - Change default bitflip threshold to 75% of correction strength
   - Miscellaneous cleanups and bugfixes

  SPI NOR:

   - Freescale QuadSPI:
   - Fix a few probe() and remove() issues
   - Add a MAINTAINERS entry for this driver
   - Tweak transfer size to increase read performance
   - Add suspend/resume support
   - Add Micron quad I/O support
   - ST FSM SPI: miscellaneous fixes

  JFFS2:

   - gracefully handle corrupted 'offset' field found on flash

  Other:

   - bcm47xxpart: add tweaks for a few new devices
   - mtdconcat: set return lengths properly for mtd_write_oob()
   - map_ram: enable use with mtdoops
   - maps: support fallback to ROM/UBI for write-protected NOR flash"

* tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits)
  mtd: hisilicon: && vs & typo
  jffs2: fix handling of corrupted summary length
  mtd: hisilicon: add device tree binding documentation
  mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc
  mtd: avoid registering reboot notifier twice
  mtd: concat: set the return lengths properly
  mtd: kconfig: replace PPC_OF with PPC
  mtd: denali: remove unnecessary stubs
  mtd: nand: remove redundant local variable
  MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver
  mtd: fsl-quadspi: improve read performance by increase AHB transfer size
  mtd: fsl-quadspi: Remove unnecessary 'map_failed' label
  mtd: fsl-quadspi: Remove unneeded success/error messages
  mtd: fsl-quadspi: Fix the error paths
  mtd: nand: omap: drop condition with no effect
  mtd: nand: jz4740: Convert to GPIO descriptor API
  mtd: nand: Request strength instead of bytes for soft BCH
  mtd: nand: default bitflip-reporting threshold to 75% of correction strength
  mtd: atmel_nand: introduce a new compatible string for sama5d4 chip
  mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction()
  ...
2015-02-18 08:01:44 -08:00
Markos Chandras
46490b5725 MIPS: kernel: elf: Improve the overall ABI and FPU mode checks
The previous implementation did not cover all possible FPU combinations
and it silently allowed ABI incompatible objects to be loaded with the
wrong ABI. For example, the previous logic would set the FP_64 ABI as
the matching ABI for an FP_XX object combined with an FP_64A object.
This was wrong, and the matching ABI should have been FP_64A.
The previous logic is now replaced with a new one which determines
the appropriate FPU mode to be used rather than the FP ABI. This has
the advantage that the entire logic is much simpler since it is the FPU
mode we are interested in rather than the FP ABI resulting to code
simplifications. This also removes the now obsolete FP32XX_HYBRID_FPRS
option.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:39 +00:00
Markos Chandras
6134d94923 MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6
MIPS32 R6 has a 64-bit FPU so add the necessary MIPS R6
definition.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:38 +00:00
Markos Chandras
e0d32f33e6 MIPS: Handle MIPS IV, V and R2 FPU instructions on MIPS R6 as well
MIPS R2 FPU instructions are also present in MIPS R6 so amend the
preprocessor definitions to take MIPS R6 into consideration.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:37 +00:00
Markos Chandras
7c151d3d5d MIPS: Make use of the ERETNC instruction on MIPS R6
The ERETNC instruction, introduced in MIPS R5, is similar to the ERET
one, except it does not clear the LLB bit in the LLADDR register.
This feature is necessary to safely emulate R2 LL/SC instructions.
However, on context switches, we need to clear the LLAddr/LLB bit
in order to make sure that an SC instruction from the new thread
will never succeed if it happens to interrupt an LL operation on the
same address from the previous thread.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:37 +00:00
Leonid Yegoshin
b0a668fb20 MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6
MIPS R6 removed quite a few R2 instructions. However, there
is plenty of <R6 userland code so we add an in-kernel emulator
so we can still be able to execute all R2 userland out there.

The emulator comes with a handy debugfs under /mips/ directory
(r2-emul-stats) to provide some basic statistics of the
instructions that are being emulated.

Below are some statistics from booting a minimal buildroot image:

Instruction     Total   BDslot
------------------------------
movs            236969  0
hilo            56686   0
muls            55279   0
divs            10941   0
dsps            0       0
bops            1       0
traps           0       0
fpus            0       0
loads           214981  17
stores          103364  0
llsc            56898   0
dsemul          150418  0
jr              370158
bltzl           43
bgezl           1594
bltzll          0
bgezll          0
bltzal          39
bgezal          39
beql            14503
bnel            138741
blezl           0
bgtzl           3988

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:37 +00:00
Markos Chandras
b55b9e2715 MIPS: asm: mipsregs: Add support for the LLADDR register
If Config5/LLB is set in the core, then software can write the LLB
bit in the LLADDR register.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:36 +00:00
Markos Chandras
5aed9da128 MIPS: Add LLB bit and related feature for the Config 5 CP0 register
The LLBIT (bit 4) in the Config5 CP0 register indicates the software
availability of the Load-Linked bit. This bit is only set by hardware
and it has the following meaning:

0: LLB functionality is not supported
1: LLB functionality is supported. The following feature are also
supported:

- ERETNC instruction. Similar to ERET but it does not clear the LLB
bit in the LLAddr register.
- CP0 LLAddr/LLB bit must be set
- LLbit is software accessible through the LLAddr[0]

This will be used later on to emulate R2 LL/SC instructions.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:36 +00:00
Markos Chandras
28d6f93d20 MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions
MIPS R6 uses the <R6 sdc2 opcode for the new BNEZC and JIALC instructions

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:35 +00:00
Markos Chandras
69b9a2fd05 MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions
MIPS R6 uses the <R6 ldc2 opcode for the new BEQZC and JIC instructions

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:35 +00:00
Markos Chandras
84fef63012 MIPS: Emulate the new MIPS R6 BALC instruction
MIPS R6 uses the <R6 swc2 opcode for the new BALC instructions.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:35 +00:00
Markos Chandras
10d962d534 MIPS: Emulate the new MIPS R6 BNVC, BNEC and BNEZLAC instructions
MIPS R6 uses the <R6 DADDI opcode for the new BNVC, BNEC and
BNEZLAC instructions.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:34 +00:00
Markos Chandras
c893ce38b2 MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions
MIPS R6 uses the <R6 ADDI opcode for the new BOVC, BEQC and
BEQZALC instructions.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:34 +00:00
Markos Chandras
8467ca0122 MIPS: Emulate the new MIPS R6 branch compact (BC) instruction
MIPS R6 uses the <R6 LWC2 opcode for the new BC instruction.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:34 +00:00
Markos Chandras
c8a34581ec MIPS: Emulate the BC1{EQ,NE}Z FPU instructions
MIPS R6 introduced the following two branch instructions for COP1:

BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero
BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:32 +00:00
Markos Chandras
5f9f41c474 MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6
The MIPS R6 JR instruction is an alias to the JALR one, so it may
need emulation for non-R6 userlands.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:31 +00:00
Leonid Yegoshin
207083b1da MIPS: kernel: r4k_switch: Add support for MIPS R6
Add the MIPS R6 related preprocessor definitions for save/restore
FPU related functions. We also set the appropriate ISA level
so the final return instruction "jr ra" will produce the correct
opcode on R6.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:27 +00:00
Markos Chandras
515a6393db MIPS: kernel: proc: Add MIPS R6 support to /proc/cpuinfo
Print 'mips64r6' and/or 'mips32r6' if the kernel is running on
a MIPS R6 core.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:26 +00:00
Markos Chandras
82e7ce8149 MIPS: asm: local: Set the appropriate ISA level for MIPS R6
MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the appropriate ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:24 +00:00
Markos Chandras
5753762cbd MIPS: asm: spinlock: Replace "sub" instruction with "addiu"
"sub $reg, imm" is not a real MIPS instruction. The assembler can
replace that with "addi $reg, -imm". However, addi has been removed
from R6, so we replace the "sub" instruction with the "addiu" one.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:23 +00:00
Markos Chandras
1922c356ab MIPS: asm: futex: Set the appropriate ISA level for MIPS R6
MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the appropriate ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:23 +00:00
Markos Chandras
87a927eff4 MIPS: asm: bitops: Update ISA constraints for MIPS R6 support
MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the correct ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:22 +00:00
Markos Chandras
0038df2240 MIPS: asm: atomic: Update ISA constraints for MIPS R6 support
MIPS R6 changed the opcodes for LL/SC instructions so we need to
set the correct ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:22 +00:00