Avoid adding an extra columns when describing unions in the documentation.
That makes it much harder to read. See e.g. VIDIOC_QUERY_EXT_CTRLS.
Instead start off a union with 'union {' and end it with an extra row
containing '}'.
This leaves a lot more space for the description of the fields.
This formatting technique was used in a few places already, but this
patches fixes all remaining occurrences of 'union' in the media uAPI.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For subdevices drivers, the drivers themself are responsible
for serializing their operations.
This patch adds serialization to the resizer subdevice.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For subdevices drivers, the drivers themself are responsible
for serializing their operations.
This patch adds serialization to the isp subdevice.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In rkisp1_isp_s_stream it is better to return error in case the
bus type is not dphy before initializing the registers.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are functions that return int but actually return always 0.
Change them to return void and then there is no need to check
for error return value.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When setting source pad, check if the given mbus code is indeed valid
for source pad, if not, then set the default code.
Same for sink pad.
Fixes: d65dd85281 ("media: staging: rkisp1: add Rockchip ISP1 base driver")
Reported-by: Wojciech Zabolotny <wzab01@gmail.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If bayer format is set in mainpath, then crop is not supported.
The core was just resetting crop but wasn't returning the values back to
user space.
Return values taken in consideration by the driver to userpace.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix issue when, in case of raw bayer format in mainpath,
VIDIOC_SUBDEV_S_FMT ioctl didn't have any effect, is wasn't updating the
format of the pad.
There is no crop for mainpath bayer raw data. Remove leftover check in
set_format, since check is already done in crop rkisp1_rsz_set_sink_crop()
function.
Fixes: d65dd85281 ("media: staging: rkisp1: add Rockchip ISP1 base driver")
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stats entity is using a slightly different bus_info string
"platform: rkisp1" (with a space) instead of "platform:rkisp1" used by
the rest of rkisp1 code.
This causes errors when using v4l2-util tools that uses the bus_info
string to identify the device.
Fixes: 9a28dbd65a ("media: staging: rkisp1: add capture device for statistics")
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Media device is using a slightly different bus_info string
"platform: rkisp1" (with a space) instead of "platform:rkisp1" used by
the rest of rkisp1 code.
This causes errors when using v4l2-util tools that uses the bus_info
string to identify the device.
Fixes: d65dd85281 ("media: staging: rkisp1: add Rockchip ISP1 base driver")
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Improve the documentation in the beginning of the file
rkisp1-isp1.c
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media_entity_get_fwnode_pad returns negative value on error
and the pad numeber on success. Therefore change the error test
from 'if (ret)' to 'if (ret < 0)' .
Fixes: d65dd85281 ("media: staging: rkisp1: add Rockchip ISP1 base driver")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function rkisp1_create_links calls media_entity_get_fwnode_pad
and media_create_pad_link in the mc api. Those calls don't require
locking the graph_mutex so remove the locking.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use WARN_ON instead of BUG_ON.
Add two new WARN_ONs to verify that the source pad is really a source
and that the sink pad is really a sink.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: use ! instead of == NULL for source and sink]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Indicate that the rk3228 rga is compatible with that of the rk3288.
But if any rk3228-specific quirks are identified in future that
require handling logic that differs from what is provided for the
rk3288, then allow for the compatibility string "rockchip,rk3228-rga"
to be matched instead of "rockchip,rk3288-rga".
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The post-processing feature is meant to be used by decoding
only. Prevent encoding jobs from enabling it.
Fixes: 8c2d66b036 ("media: hantro: Support color conversion via post-processing")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add space for MVs and MC sync data to the capture buffers depending on
whether the post processor will be enabled for the new capture format
passed to TRY_FMT, not the currently set capture format.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Luma and chroma qtables need to be written into two 16-register blocks,
each table consisting of 64 bytes total. The blocks are contiguous and
start at offset 0 for luma and at offset 0x40 for chroma.
The seemingly innocent optimization of writing the two blocks using one
loop causes side effects which result in improper values of quantization
tables being used by the hardware during encoding. Visually this results
in macroblocking artifacts around contrasting edges in encoded images. The
artifacts look like horizontally flipped shadows of the said edges.
Changing the write operations to non-relaxed variant doesn't help.
This patch removes this premature optimization and after this change the
macroblocking artifacts around contrasting edges are gone.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The quantization tables as defined in the file (luma_q_table,
chroma_q_table) are in fact in linear order. The JPEG file header, which is
not generated by the hardware, but must be programatically created with the
CPU, expects the table in zigzag order. On the other hand, the hardware
doesn't expect neither linear, nor zigzag order. Instead it expects the
quantization tables in vertical groups of four quantization parameters,
and the groups are organized in blocks of two vertically adjacent groups.
On top of that the blocks must be provided to the hardware in this order:
leftmost top block, leftmost bottom block, second leftmost top block,
second leftmost bottom block and so on. So, if this is the quantization
table in linear order:
0x10, 0x0b, 0x0a, 0x10, 0x18, 0x28, 0x33, 0x3d,
0x0c, 0x0c, 0x0e, 0x13, 0x1a, 0x3a, 0x3c, 0x37,
0x0e, 0x0d, 0x10, 0x18, 0x28, 0x39, 0x45, 0x38,
0x0e, 0x11, 0x16, 0x1d, 0x33, 0x57, 0x50, 0x3e,
0x12, 0x16, 0x25, 0x38, 0x44, 0x6d, 0x67, 0x4d,
0x18, 0x23, 0x37, 0x40, 0x51, 0x68, 0x71, 0x5c,
0x31, 0x40, 0x4e, 0x57, 0x67, 0x79, 0x78, 0x65,
0x48, 0x5c, 0x5f, 0x62, 0x70, 0x64, 0x67, 0x63
then the hardware expects this in its consecutive registers:
0x100c0e0e,
0x0b0c0d11,
0x12183148,
0x1623405c,
0x0a0e1016,
0x1013181d,
0x25374e5f,
0x38405762,
and so on.
Consequently, the same area of memory cannot be used both for dumping it
into the JPEG file header and writing its contents to the hardware
registers. Instead, a separate pair of arrays is added for properly
reordered quantization tables, to be read with get_unaligned_be32()
and linearly written to the registers.
The "ctx" parameter is not needed any more for hantro_jpeg_get_qtable().
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The table is actually different in the document than in this file, so align
this file with the document.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since (luma/chroma)_qtable is an array of unsigned char, indexing it
returns consecutive byte locations, but we are supposed to read the arrays
in four-byte words. Consequently, we should be pointing
get_unaligned_be32() at consecutive word locations instead.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Cc: stable@vger.kernel.org
Fixes: 00c30f42c7 "media: rockchip vpu: remove some unused vars"
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is a spelling mistake in a v4l2_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ignore errors returned from kthread_stop since the
vimc subdevices should still be notified that
streaming stopped so they can release the memory for
the streaming, and also kthread should be set to NULL.
kthread_stop can return -EINTR in case the thread
did not yet run. This can happen if userspace calls
streamon and streamoff right after.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The only places which make sese to allow users to enable or disable
links are:
* between sensors and isp:
So users can select which sensor should be used while streaming
* between isp and the resizers:
|
v here
rkisp1_isp:2 -> rkisp1_resizer_mainpath -> rkisp1_mainpath (capture)
\-> rkisp1_resizer_selfpath -> rkisp1_selfpath (capture)
^ here
|
So users can disable one of the capture paths when unused, to avoid
worring about matching formats.
Make the following links immutable to simplify userspace:
rkisp1_resizer_mainpath -> rkisp1_mainpath
rkisp1_resizer_selfpath -> rkisp1_selfpath
rkisp1_params -> rkisp1_isp
rkisp1_isp -> rkisp1_stats
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's a mistakenly written self assignment in
`static int vpfe_enum_fmt_vid_cap(..)`.
Fixed it according to Prabhakar Lad's feedback.
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The last driver was converted to use VFL_TYPE_VIDEO, so the old
_GRABBER enum can now be removed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Christian Gromm <christian.gromm@microchip.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We currently have the following devnode types:
enum vfl_devnode_type {
VFL_TYPE_GRABBER = 0,
VFL_TYPE_VBI,
VFL_TYPE_RADIO,
VFL_TYPE_SUBDEV,
VFL_TYPE_SDR,
VFL_TYPE_TOUCH,
VFL_TYPE_MAX /* Shall be the last one */
};
They all make sense, except for the first: GRABBER really refers to /dev/videoX
devices, which can be capture, output or m2m, so 'grabber' doesn't even refer to
their function anymore.
Let's call a spade a spade and rename this to VFL_TYPE_VIDEO.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
allegro_open() misses checks for v4l2_m2m_ctx_init() and results of
v4l2_ctrl_new* calls.
Add checks and error handlers to fix the problems.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver forgets to disable and unprepare clock when remove.
Add a call to clk_disable_unprepare() to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This is an NEC remote control device shipped with the Videostrong KII Pro
tv box as well as other devices from videostrong.
Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The variable rc is being initialized with a value that is never
read and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid submitting an URB to an invalid endpoint.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: c4018fa2e4 ("[media] dib0700: fix RC support on Hauppauge Nova-TD")
Cc: stable <stable@vger.kernel.org> # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
commit 1b976fc6d6 ("media: b2c2-flexcop-usb: add sanity checking") added
an endpoint sanity check to address a NULL-pointer dereference on probe.
Unfortunately the check was done on the current altsetting which was later
changed.
Fix this by moving the sanity check to after the altsetting is changed.
Fixes: 1b976fc6d6 ("media: b2c2-flexcop-usb: add sanity checking")
Cc: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The hardware does not support capturing the field types
V4L2_FIELD_SEQ_TB and V4L2_FIELD_SEQ_BT. To capture in these formats the
driver needs to adjust the offset of the capture buffer and capture
twice to each vb2 buffer.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To support SEQ_TB/BT not all buffers given to the hardware will be
equal, the driver needs to keep track of different buffer types. Move
the tracking of buffers given to hardware into a struct so additional
tracking fields can be associated with each buffer.
[hverkuil: fix small checkpatch warning]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.
By using dma_request_chan() directly the driver can support deferred
probing against DMA.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In case kthread_run fails, the vimc subdevices
should be notified that streaming stopped so they can
release the memory for the streaming. Also, kthread should be
set to NULL.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a init_cfg pad operation so that configurations allocated with
v4l2_subdev_alloc_pad_config() are initialized.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
An attempt to get a BUTTON control returns EACCES, not EINVAL.
BUTTON controls have V4L2_CTRL_FLAG_WRITE_ONLY set, and the documentation
for that flag correctly says that getting a write-only control returns
EACCES. It's the description of the BUTTON type that's wrong, so fix
that so they are consistent.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging on
various user requests due to a malfunctioning (or malicious) device
until the device is physically disconnected.
The USB upper limit of five seconds per request should be more than
enough.
Fixes: f3d27f34fd ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber")
Fixes: c53a846c48 ("[media] usbtv: add video controls")
Cc: stable <stable@vger.kernel.org> # 3.11
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
