Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
Pull rdma updates from Jason Gunthorpe:
"A typical collection of patches this cycle, mostly fixing with a few
new features:
- Fixes from static tools. clang warnings, dead code, unused
variable, coccinelle sweeps, etc
- Driver bug fixes and minor improvements in rxe, bnxt_re, hfi1,
mlx5, irdma, qedr
- rtrs ULP bug fixes an improvments
- Additional counters for bnxt_re
- Support verbs CQ notifications in EFA
- Continued reworking and fixing of rxe
- netlink control to enable/disable optional device counters
- rxe now can use AH objects for its UD path, fixing various bugs in
the process
- Add DMABUF support to EFA"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (103 commits)
RDMA/core: Require the driver to set the IOVA correctly during rereg_mr
RDMA/bnxt_re: Remove unsupported bnxt_re_modify_ah callback
RDMA/irdma: optimize rx path by removing unnecessary copy
RDMA/qed: Use helper function to set GUIDs
RDMA/hns: Use the core code to manage the fixed mmap entries
IB/opa_vnic: Rebranding of OPA VNIC driver to Cornelis Networks
IB/qib: Rebranding of qib driver to Cornelis Networks
IB/hfi1: Rebranding of hfi1 driver to Cornelis Networks
RDMA/bnxt_re: Use helper function to set GUIDs
RDMA/bnxt_re: Fix kernel panic when trying to access bnxt_re_stat_descs
RDMA/qedr: Fix NULL deref for query_qp on the GSI QP
RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility
RDMA/hns: Fix initial arm_st of CQ
RDMA/rxe: Make rxe_type_info static const
RDMA/rxe: Use 'bitmap_zalloc()' when applicable
RDMA/rxe: Save a few bytes from struct rxe_pool
RDMA/irdma: Remove the unused variable local_qp
RDMA/core: Fix missed initialization of rdma_hw_stats::lock
RDMA/efa: Add support for dmabuf memory regions
RDMA/umem: Allow pinned dmabuf umem usage
...
If the driver returns a new MR during rereg it has to fill it with the
IOVA from the proper source. If IB_MR_REREG_TRANS is set then the IOVA is
cmd.hca_va, otherwise the IOVA comes from the old MR. mlx5 for example has
two calls inside rereg_mr:
return create_real_mr(new_pd, umem, mr->ibmr.iova,
new_access_flags);
and
return create_real_mr(new_pd, new_umem, iova, new_access_flags);
Unconditionally overwriting the iova in the newly allocated MR will
corrupt the iova if the first path is used.
Remove the redundant initializations from ib_uverbs_rereg_mr().
Fixes: 6e0954b11c ("RDMA/uverbs: Allow drivers to create a new HW object during rereg_mr")
Link: https://lore.kernel.org/r/4b0a31bbc372842613286a10d7a8cbb0ee6069c7.1635400472.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Patches held over for a possible rc8.
* for-rc:
RDMA/qedr: Fix NULL deref for query_qp on the GSI QP
RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility
RDMA/hns: Fix initial arm_st of CQ
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The upper limit of MAX_LP_MSG_LEN on HIP08 is 64K, and the upper limit on
HIP09 is 16K. Regardless of whether it is HIP08 or HIP09, only 16K will be
used. In order to ensure compatibility, it is unified to 16K.
Setting MAX_LP_MSG_LEN to 16K will not cause performance loss on HIP08.
Fixes: fbed9d2be2 ("RDMA/hns: Fix configuration of ack_req_freq in QPC")
Link: https://lore.kernel.org/r/20211029100537.27299-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make struct rxe_type_info static const and local to the only uses. Moves
a bit of data to text.
$ size drivers/infiniband/sw/rxe/rxe_pool.o* (defconfig w/ infiniband swe)
text data bss dec hex filename
4456 12 0 4468 1174 drivers/infiniband/sw/rxe/rxe_pool.o.new
3817 652 0 4469 1175 drivers/infiniband/sw/rxe/rxe_pool.o.old
Link: https://lore.kernel.org/r/166b715d71f98336e8ecab72b0dbdd266eee9193.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
alloc_and_bind() creates a new rdma_hw_stats structure but misses
initializing the mutex lock.
This causes debug kernel failures:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 4 PID: 64464 at kernel/locking/mutex.c:575 __mutex_lock+0x9c3/0x12b0
Call Trace:
fill_res_counter_entry+0x6ee/0x1020 [ib_core]
res_get_common_dumpit+0x907/0x10a0 [ib_core]
nldev_stat_get_dumpit+0x20a/0x290 [ib_core]
netlink_dump+0x451/0x1040
__netlink_dump_start+0x583/0x830
rdma_nl_rcv_msg+0x3f3/0x7c0 [ib_core]
rdma_nl_rcv+0x264/0x410 [ib_core]
netlink_unicast+0x433/0x700
netlink_sendmsg+0x707/0xbf0
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x193/0x240
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Instead of requiring all users to open code initialization of the lock put
it in the general rdma_alloc_hw_stats_struct() function and remove
duplicates.
Fixes: c4ffee7c9b ("RDMA/netlink: Implement counter dumpit calback")
Link: https://lore.kernel.org/r/4a22986c4685058d2c735d91703ee7d865815bb9.1635237668.git.leonro@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce ib_umem_dmabuf_get_pinned() which allows the driver to get a
dmabuf umem which is pinned and does not require move_notify callback
implementation.
The returned umem is pinned and DMA mapped like standard cpu umems, and is
released through ib_umem_release() (incl. unpinning and unmapping).
Link: https://lore.kernel.org/r/20211012120903.96933-3-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The mlx5_ib_fs_add_op_fc/mlx5_ib_fs_remove_op_fc functions are only
available when user access is enabled, without that we run into a link
error:
ERROR: modpost: "mlx5_ib_fs_add_op_fc" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined!
ERROR: modpost: "mlx5_ib_fs_remove_op_fc" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined!
Conditionally compiling the newly added code section makes it build,
though this is probably not a correct fix.
Fixes: a29b934ceb ("RDMA/mlx5: Add modify_op_stat() support")
Link: https://lore.kernel.org/r/20211019061602.3062196-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A small series to clean up the mlx5 mkey code across the mlx5_core and
InfiniBand.
* branch 'mlx5_mkey':
RDMA/mlx5: Attach ndescs to mlx5_ib_mkey
RDMA/mlx5: Move struct mlx5_core_mkey to mlx5_ib
RDMA/mlx5: Replace struct mlx5_core_mkey by u32 key
RDMA/mlx5: Remove pd from struct mlx5_core_mkey
RDMA/mlx5: Remove size from struct mlx5_core_mkey
RDMA/mlx5: Remove iova from struct mlx5_core_mkey
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The 'struct attribute' flex array contains some struct lock_class_key's
which become big when lockdep is turned on. Big enough that some drivers
will not load when CONFIG_PROVE_LOCKING=y because they cannot allocate
enough memory:
WARNING: CPU: 36 PID: 8 at mm/page_alloc.c:5350 __alloc_pages+0x27e/0x3e0
Call Trace:
kmalloc_order+0x2a/0xb0
kmalloc_order_trace+0x19/0xf0
__kmalloc+0x231/0x270
ib_setup_port_attrs+0xd8/0x870 [ib_core]
ib_register_device+0x419/0x4e0 [ib_core]
bnxt_re_task+0x208/0x2d0 [bnxt_re]
Link: https://lore.kernel.org/r/20211019002656.17745-1-wangyugui@e16-tech.com
Signed-off-by: wangyugui <wangyugui@e16-tech.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When irdma_ws_add fails, irdma_ws_remove is used to cleanup the leaf node.
This lead to holding the qos mutex twice in the QP resume path. Fix this
by avoiding the call to irdma_ws_remove and unwinding the error in
irdma_ws_add. This skips the call to irdma_tc_in_use function which is not
needed in the error unwind cases.
Fixes: 3ae331c751 ("RDMA/irdma: Add QoS definitions")
Link: https://lore.kernel.org/r/20211019151654.1943-2-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A small series to clean up the mlx5 mkey code across the mlx5_core and
InfiniBand.
* branch 'mlx5_mkey':
RDMA/mlx5: Attach ndescs to mlx5_ib_mkey
RDMA/mlx5: Move struct mlx5_core_mkey to mlx5_ib
RDMA/mlx5: Replace struct mlx5_core_mkey by u32 key
RDMA/mlx5: Remove pd from struct mlx5_core_mkey
RDMA/mlx5: Remove size from struct mlx5_core_mkey
RDMA/mlx5: Remove iova from struct mlx5_core_mkey
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move mlx5_core_mkey struct to mlx5_ib, as the mlx5_core doesn't use it
at this point.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
In mlx5_core and vdpa there is no use of mlx5_core_mkey members except
for the key itself.
As preparation for moving mlx5_core_mkey to mlx5_ib, the occurrences of
struct mlx5_core_mkey in all modules except for mlx5_ib are replaced by
a u32 key.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
mkey->size is already stored in ibmr->length, no need to store it here.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
