Fix to probe on gcc generated functions on modules. Since
probing on a module is based on its symbol name, it should
be adjusted on actual symbols.
E.g. without this fix, perf probe shows probe definition
on non-exist symbol as below.
$ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -F in_range*
in_range.isra.12
$ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range
p:probe/in_range nf_nat:in_range+0
With this fix, perf probe correctly shows a probe on
gcc-generated symbol.
$ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range
p:probe/in_range nf_nat:in_range.isra.12+0
This also fixes same problem on online module as below.
$ perf probe -m i915 -D assert_plane
p:probe/assert_plane i915:assert_plane.constprop.134+0
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148411450673.9978.14905987549651656075.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add error check codes on post processing and improve it for offline
probe events as:
- post processing fails if no matched symbol found in map(-ENOENT)
or strdup() failed(-ENOMEM).
- Even if the symbol name is the same, it updates symbol address
and offset.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148411443738.9978.4617979132625405545.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to show correct locations for events on modules by relocating given
address instead of retrying after failure.
This happens when the module text size is big enough, bigger than
sh_addr, because the original code retries with given address + sh_addr
if it failed to find CU DIE at the given address.
Any address smaller than sh_addr always fails and it retries with the
correct address, but addresses bigger than sh_addr will get a CU DIE
which is on the given address (not adjusted by sh_addr).
In my environment(x86-64), the sh_addr of ".text" section is 0x10030.
Since i915 is a huge kernel module, we can see this issue as below.
$ grep "[Tt] .*\[i915\]" /proc/kallsyms | sort | head -n1
ffffffffc0270000 t i915_switcheroo_can_switch [i915]
ffffffffc0270000 + 0x10030 = ffffffffc0280030, so we'll check
symbols cross this boundary.
$ grep "[Tt] .*\[i915\]" /proc/kallsyms | grep -B1 ^ffffffffc028\
| head -n 2
ffffffffc027ff80 t haswell_init_clock_gating [i915]
ffffffffc0280110 t valleyview_init_clock_gating [i915]
So setup probes on both function and see what happen.
$ sudo ./perf probe -m i915 -a haswell_init_clock_gating \
-a valleyview_init_clock_gating
Added new events:
probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915)
probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915)
You can now use it in all perf tools, such as:
perf record -e probe:valleyview_init_clock_gating -aR sleep 1
$ sudo ./perf probe -l
probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
probe:valleyview_init_clock_gating (on i915_vga_set_decode:4@gpu/drm/i915/i915_drv.c in i915)
As you can see, haswell_init_clock_gating is correctly shown,
but valleyview_init_clock_gating is not.
With this patch, both events are shown correctly.
$ sudo ./perf probe -l
probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
Committer notes:
In my case:
# perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating
Added new events:
probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915)
probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915)
You can now use it in all perf tools, such as:
perf record -e probe:valleyview_init_clock_gating -aR sleep 1
# perf probe -l
probe:haswell_init_clock_gating (on i915_getparam+432@gpu/drm/i915/i915_drv.c in i915)
probe:valleyview_init_clock_gating (on __i915_printk+240@gpu/drm/i915/i915_drv.c in i915)
#
# readelf -SW /lib/modules/4.9.0+/build/vmlinux | egrep -w '.text|Name'
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 1] .text PROGBITS ffffffff81000000 200000 822fd3 00 AX 0 0 4096
#
So both are b0rked, now with the fix:
# perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating
Added new events:
probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915)
probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915)
You can now use it in all perf tools, such as:
perf record -e probe:valleyview_init_clock_gating -aR sleep 1
# perf probe -l
probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
#
Both looks correct.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148411436777.9978.1440275861947194930.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"Misc race fixes uncovered by fuzzing efforts, a Sparse fix, two PMU
driver fixes, plus miscellanous tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Reject non sampling events with precise_ip
perf/x86/intel: Account interrupts for PEBS errors
perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race
perf/core: Fix sys_perf_event_open() vs. hotplug
perf/x86/intel: Use ULL constant to prevent undefined shift behaviour
perf/x86/intel/uncore: Fix hardcoded socket 0 assumption in the Haswell init code
perf/x86: Set pmu->module in Intel PMU modules
perf probe: Fix to probe on gcc generated symbols for offline kernel
perf probe: Fix --funcs to show correct symbols for offline module
perf symbols: Robustify reading of build-id from sysfs
perf tools: Install tools/lib/traceevent plugins with install-bin
tools lib traceevent: Fix prev/next_prio for deadline tasks
perf record: Fix --switch-output documentation and comment
perf record: Make __record_options static
tools lib subcmd: Add OPT_STRING_OPTARG_SET option
perf probe: Fix to get correct modname from elf header
samples/bpf trace_output_user: Remove duplicate sys/ioctl.h include
samples/bpf sock_example: Avoid getting ethhdr from two includes
perf sched timehist: Show total scheduling time
The flag was introduced by commit 78afd5612d ("mm: add
__GFP_OTHER_NODE flag") to allow proper accounting of remote node
allocations done by kernel daemons on behalf of a process - e.g.
khugepaged.
After "mm: fix remote numa hits statistics" we do not need and actually
use the flag so we can safely remove it because all allocations which
are satisfied from their "home" node are accounted properly.
[mhocko@suse.com: fix build]
Link: http://lkml.kernel.org/r/20170106122225.GK5556@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170102153057.9451-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes:
- Fix prev/next_prio formatting for deadline tasks in libtraceevent (Daniel Bristot de Oliveira)
- Robustify reading of build-ids from /sys/kernel/note (Arnaldo Carvalho de Melo)
- Fix building some sample/bpf in Alpine Linux 3.4 (Arnaldo Carvalho de Melo)
- Fix 'make install-bin' to install libtraceevent plugins (Arnaldo Carvalho de Melo)
- Fix 'perf record --switch-output' documentation and comment (Jiri Olsa)
- 'perf probe' fixes for cross arch probing (Masami Hiramatsu)
Improvement:
- Show total scheduling time in 'perf sched timehist' (Namhyumg Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=o9KL
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.10-20170104' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes and one improvement from Arnaldo Carvalho de Melo:
Fixes:
- Fix prev/next_prio formatting for deadline tasks in libtraceevent (Daniel Bristot de Oliveira)
- Robustify reading of build-ids from /sys/kernel/note (Arnaldo Carvalho de Melo)
- Fix building some sample/bpf in Alpine Linux 3.4 (Arnaldo Carvalho de Melo)
- Fix 'make install-bin' to install libtraceevent plugins (Arnaldo Carvalho de Melo)
- Fix 'perf record --switch-output' documentation and comment (Jiri Olsa)
- Fix 'perf probe' for cross arch probing (Masami Hiramatsu)
Improvement:
- Show total scheduling time in 'perf sched timehist' (Namhyumg Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix perf-probe to show probe definition on gcc generated symbols for
offline kernel (including cross-arch kernel image).
gcc sometimes optimizes functions and generate new symbols with suffixes
such as ".constprop.N" or ".isra.N" etc. Since those symbol names are
not recorded in DWARF, we have to find correct generated symbols from
offline ELF binary to probe on it (kallsyms doesn't correct it). For
online kernel or uprobes we don't need it because those are rebased on
_text, or a section relative address.
E.g. Without this:
$ perf probe -k build-arm/vmlinux -F __slab_alloc*
__slab_alloc.constprop.9
$ perf probe -k build-arm/vmlinux -D __slab_alloc
p:probe/__slab_alloc __slab_alloc+0
If you put above definition on target machine, it should fail
because there is no __slab_alloc in kallsyms.
With this fix, perf probe shows correct probe definition on
__slab_alloc.constprop.9:
$ perf probe -k build-arm/vmlinux -D __slab_alloc
p:probe/__slab_alloc __slab_alloc.constprop.9+0
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148350060434.19001.11864836288580083501.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix --funcs (-F) option to show correct symbols for offline module.
Since previous perf-probe uses machine__findnew_module_map() for offline
module, even if user passes a module file (with full path) which is for
other architecture, perf-probe always tries to load symbol map for
current kernel module.
This fix uses dso__new_map() to load the map from given binary as same
as a map for user applications.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148350053478.19001.15435255244512631545.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Markus reported that perf segfaults when reading /sys/kernel/notes from
a kernel linked with GNU gold, due to what looks like a gold bug, so do
some bounds checking to avoid crashing in that case.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Report-Link: http://lkml.kernel.org/r/20161219161821.GA294@x4
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ryhgs6a6jxvz207j2636w31c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are binaries as well, so should be installed by:
make -C tools/perf install-bin'
too.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-3841b37u05evxrs1igkyu6ks@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no --signal-trigger option, also adding the code comment into
record man page.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483431600-19887-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need for this one to be global.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483431600-19887-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 'perf probe' supports cross-arch probes, it is possible to analyze
different arch kernel image which has different bits-per-long.
In that case, it fails to get the module name because it uses the
MOD_NAME_OFFSET macro based on the host machine bits-per-long, instead
of the target arch bits-per-long.
This fixes above issue by changing modname-offset based on the target
archs bit width. This is ok because linux kernel uses LP64 model on
64bit arch.
E.g. without this (on x86_64, and target module is arm32):
$ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
p:probe/configfs_lookup :configfs_lookup+0
^-Here is an empty module name.
With this fix, you can see correct module name:
$ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
p:probe/configfs_lookup configfs:configfs_lookup+0
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148337043836.6752.383495516397005695.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show length of analyzed sample time and rate of idle task running.
This also takes care of time range given by --time option.
$ perf sched timehist -sI | tail
Samples do not have callchains.
Idle stats:
CPU 0 idle for 930.316 msec ( 92.93%)
CPU 1 idle for 963.614 msec ( 96.25%)
CPU 2 idle for 885.482 msec ( 88.45%)
CPU 3 idle for 938.635 msec ( 93.76%)
Total number of unique tasks: 118
Total number of context switches: 2337
Total run time (msec): 3718.048
Total scheduling time (msec): 1001.131 (x 4)
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"On the kernel side there's two x86 PMU driver fixes and a uprobes fix,
plus on the tooling side there's a number of fixes and some late
updates"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf sched timehist: Fix invalid period calculation
perf sched timehist: Remove hardcoded 'comm_width' check at print_summary
perf sched timehist: Enlarge default 'comm_width'
perf sched timehist: Honour 'comm_width' when aligning the headers
perf/x86: Fix overlap counter scheduling bug
perf/x86/pebs: Fix handling of PEBS buffer overflows
samples/bpf: Move open_raw_sock to separate header
samples/bpf: Remove perf_event_open() declaration
samples/bpf: Be consistent with bpf_load_program bpf_insn parameter
tools lib bpf: Add bpf_prog_{attach,detach}
samples/bpf: Switch over to libbpf
perf diff: Do not overwrite valid build id
perf annotate: Don't throw error for zero length symbols
perf bench futex: Fix lock-pi help string
perf trace: Check if MAP_32BIT is defined (again)
samples/bpf: Make perf_event_read() static
uprobes: Fix uprobes on MIPS, allow for a cache flush after ixol breakpoint creation
samples/bpf: Make samples more libbpf-centric
tools lib bpf: Add flags to bpf_create_map()
tools lib bpf: use __u32 from linux/types.h
...
When --time option is given with a value outside recorded time, the last
sample time (tprev) was set to that value and run time calculation might
be incorrect. This is a problem of the first samples for each cpus
since it would skip the runtime update when tprev is 0. But with --time
option it had non-zero (which is invalid) value so the calculation is
also incorrect.
For example, let's see the followging:
$ perf sched timehist
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
3195.968367 [0003] <idle> 0.000 0.000 0.000
3195.968386 [0002] Timer[4306/4277] 0.000 0.000 0.018
3195.968397 [0002] Web Content[4277] 0.000 0.000 0.000
3195.968595 [0001] JS Helper[4302/4277] 0.000 0.000 0.000
3195.969217 [0000] <idle> 0.000 0.000 0.621
3195.969251 [0001] kworker/1:1H[291] 0.000 0.000 0.033
The sample starts at 3195.968367 but when I gave a time interval from
3194 to 3196 (in sec) it will calculate the whole 2 second as runtime.
In below, 2 cpus accounted it as runtime, other 2 cpus accounted it as
idle time.
Before:
$ perf sched timehist --time 3194,3196 -s | tail
Idle stats:
CPU 0 idle for 1995.991 msec
CPU 1 idle for 20.793 msec
CPU 2 idle for 30.191 msec
CPU 3 idle for 1999.852 msec
Total number of unique tasks: 23
Total number of context switches: 128
Total run time (msec): 3724.940
After:
$ perf sched timehist --time 3194,3196 -s | tail
Idle stats:
CPU 0 idle for 10.811 msec
CPU 1 idle for 20.793 msec
CPU 2 idle for 30.191 msec
CPU 3 idle for 18.337 msec
Total number of unique tasks: 23
Total number of context switches: 128
Total run time (msec): 18.139
Committer notes:
Further testing:
Before:
Idle stats:
CPU 0 idle for 229.785 msec
CPU 1 idle for 937.944 msec
CPU 2 idle for 188.931 msec
CPU 3 idle for 986.185 msec
After:
# perf sched timehist --time 40602,40603 -s | tail
Idle stats:
CPU 0 idle for 229.785 msec
CPU 1 idle for 175.407 msec
CPU 2 idle for 188.931 msec
CPU 3 idle for 223.657 msec
Total number of unique tasks: 68
Total number of context switches: 814
Total run time (msec): 97.688
# for cpu in `seq 0 3` ; do echo -n "CPU $cpu idle for " ; perf sched timehist --time 40602,40603 | grep "\[000${cpu}\].*\<idle\>" | tr -s ' ' | cut -d' ' -f7 | awk '{entries++ ; s+=$1} END {print s " msec (entries: " entries ")"}' ; done
CPU 0 idle for 229.721 msec (entries: 123)
CPU 1 idle for 175.381 msec (entries: 65)
CPU 2 idle for 188.903 msec (entries: 56)
CPU 3 idle for 223.61 msec (entries: 102)
Difference due to the idle stats being accounted at nanoseconds precision while
the <idle> entries in 'perf sched timehist' are trucated at msec.usec.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 853b740711 ("perf sched timehist: Add option to specify time window of interest")
Link: http://lkml.kernel.org/r/20161222060350.17655-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that the default 'comm_width' value is 30, no need to check that at
print_summary,
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current default value is 20 but it's easily changed to a bigger value as
task has a long name and different tid and pid. And it makes the output
not aligned. So change it to have a large value as summary shows.
Committer notes:
Before:
# perf sched record
^C
# perf sched timehist
<SNIP>
40602.770537 [0001] rcuos/2[29] 7.970 0.002 0.020
40602.771512 [0003] <idle> 0.003 0.000 0.986
40602.771586 [0001] <idle> 0.020 0.000 1.049
40602.771606 [0001] qemu-system-x86[3593/3510] 0.000 0.002 0.020
40602.771629 [0003] qemu-system-x86[3510] 0.000 0.003 0.116
40602.771776 [0000] <idle> 0.001 0.000 1.892
<SNIP>
After:
# perf sched timehist
<SNIP>
40602.770537 [0001] rcuos/2[29] 7.970 0.002 0.020
40602.771512 [0003] <idle> 0.003 0.000 0.986
40602.771586 [0001] <idle> 0.020 0.000 1.049
40602.771606 [0001] qemu-system-x86[3593/3510] 0.000 0.002 0.020
40602.771629 [0003] qemu-system-x86[3510] 0.000 0.003 0.116
<SNIP>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current default value is 20, but that may change in the future, so make
places where we have 20 hardcoded use 'comm_width'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes a perf diff regression issue which was introduced by commit
5baecbcd9c ("perf symbols: we can now read separate debug-info files
based on a build ID")
The binary name could be same when perf diff different binaries. Build
id is used to distinguish between them.
However, the previous patch assumes the same binary name has same build
id. So it overwrites the build id according to the binary name,
regardless of whether the build id is set or not.
Check the has_build_id in dso__load. If the build id is already set, use
it.
Before the fix:
$ perf diff 1.perf.data 2.perf.data
# Event 'cycles'
#
# Baseline Delta Shared Object Symbol
# ........ ....... ................ .............................
#
99.83% -99.80% tchain_edit [.] f2
0.12% +99.81% tchain_edit [.] f3
0.02% -0.01% [ixgbe] [k] ixgbe_read_reg
After the fix:
$ perf diff 1.perf.data 2.perf.data
# Event 'cycles'
#
# Baseline Delta Shared Object Symbol
# ........ ....... ................ .............................
#
99.83% +0.10% tchain_edit [.] f3
0.12% -0.08% tchain_edit [.] f2
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
CC: Dima Kogan <dima@secretsauce.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 5baecbcd9c ("perf symbols: we can now read separate debug-info files based on a build ID")
Link: http://lkml.kernel.org/r/1481642984-13593-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf report --tui' exits with error when it finds a sample of zero
length symbol (i.e. addr == sym->start == sym->end). Actually these are
valid samples. Don't exit TUI and show report with such symbols.
Reported-and-Tested-by: Anton Blanchard <anton@samba.org>
Link: https://lkml.org/lkml/2016/10/8/189
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org # v4.9+
Link: http://lkml.kernel.org/r/1479804050-5028-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There might be systems where MAP_32BIT is not defined, like some some
RHEL7 powerpc versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kyle McMartin <kyle@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 256763b017 ("perf trace beauty mmap: Add more conditional defines")
Link: http://lkml.kernel.org/r/1481831814-23683-1-git-send-email-jolsa@kernel.org
[ Changed the Fixme cset to the one removing the conditional switch case for MAP_32BIT ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull kbuild updates from Michal Marek:
- prototypes for x86 asm-exported symbols (Adam Borowski) and a warning
about missing CRCs (Nick Piggin)
- asm-exports fix for LTO (Nicolas Pitre)
- thin archives improvements (Nick Piggin)
- linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick
Piggin)
- genksyms support for __builtin_va_list keyword
- misc minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
x86/kbuild: enable modversions for symbols exported from asm
kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case
scripts/kallsyms: remove last remnants of --page-offset option
make use of make variable CURDIR instead of calling pwd
kbuild: cmd_export_list: tighten the sed script
kbuild: minor improvement for thin archives build
kbuild: modpost warn if export version crc is missing
kbuild: keep data tables through dead code elimination
kbuild: improve linker compatibility with lib-ksyms.o build
genksyms: Regenerate parser
kbuild/genksyms: handle va_list type
kbuild: thin archives for multi-y targets
kbuild: kallsyms allow 3-pass generation if symbols size has changed
If jump target is outside of function range, perf is not handling it
correctly. Especially when target address is lesser than function start
address, target offset will be negative. But, target address declared to
be unsigned, converts negative number into 2's complement. See below
example. Here target of 'jumpq' instruction at 34cf8 is 34ac0 which is
lesser than function start address(34cf0).
34ac0 - 34cf0 = -0x230 = 0xfffffffffffffdd0
Objdump output:
0000000000034cf0 <__sigaction>:
__GI___sigaction():
34cf0: lea -0x20(%rdi),%eax
34cf3: cmp -bashx1,%eax
34cf6: jbe 34d00 <__sigaction+0x10>
34cf8: jmpq 34ac0 <__GI___libc_sigaction>
34cfd: nopl (%rax)
34d00: mov 0x386161(%rip),%rax # 3bae68 <_DYNAMIC+0x2e8>
34d07: movl -bashx16,%fs:(%rax)
34d0e: mov -bashxffffffff,%eax
34d13: retq
perf annotate before applying patch:
__GI___sigaction /usr/lib64/libc-2.22.so
lea -0x20(%rdi),%eax
cmp -bashx1,%eax
v jbe 10
v jmpq fffffffffffffdd0
nop
10: mov _DYNAMIC+0x2e8,%rax
movl -bashx16,%fs:(%rax)
mov -bashxffffffff,%eax
retq
perf annotate after applying patch:
__GI___sigaction /usr/lib64/libc-2.22.so
lea -0x20(%rdi),%eax
cmp -bashx1,%eax
v jbe 10
^ jmpq 34ac0 <__GI___libc_sigaction>
nop
10: mov _DYNAMIC+0x2e8,%rax
movl -bashx16,%fs:(%rax)
mov -bashxffffffff,%eax
retq
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1480953407-7605-3-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Architectures like PowerPC have jump instructions that includes a target
address as a second operand. For example, 'bne cr7,0xc0000000000f6154'.
Add support for such instruction in perf annotate.
objdump o/p:
c0000000000f6140: ld r9,1032(r31)
c0000000000f6144: cmpdi cr7,r9,0
c0000000000f6148: bne cr7,0xc0000000000f6154
c0000000000f614c: ld r9,2312(r30)
c0000000000f6150: std r9,1032(r31)
c0000000000f6154: ld r9,88(r31)
Corresponding perf annotate o/p:
Before patch:
ld r9,1032(r31)
cmpdi cr7,r9,0
v bne 3ffffffffff09f2c
ld r9,2312(r30)
std r9,1032(r31)
74: ld r9,88(r31)
After patch:
ld r9,1032(r31)
cmpdi cr7,r9,0
v bne 74
ld r9,2312(r30)
std r9,1032(r31)
74: ld r9,88(r31)
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1480953407-7605-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf_evsel::ignore_missing_thread for -u option to ignore
complete failure if any of the user's processes die between its
enumeration and time we open the event.
Committer notes:
While doing a 'make -j4 allmodconfig' we sometimes get into the race:
Before:
# perf record -u acme
Error:
The sys_perf_event_open() syscall returned with 3 (No such process) for event (cycles:ppp).
/bin/dmesg may provide additional information.
No CONFIG_PERF_EVENTS=y kernel support configured?
#
After:
[root@jouet ~]# perf record -u acme
WARNING: Ignored open failure for pid 9888
WARNING: Ignored open failure for pid 18059
[root@jouet ~]#
Which is an improvement, with the races not preventing the remaining threads
for the specified user from being monitored, but the message probably needs
further clarification.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481538943-21874-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding perf_evsel::ignore_missing_cpu_thread bool.
When set true, it allows perf to ignore error of missing pid of perf
event syscall.
We remove missing thread id from the thread_map, so the rest of the
processing like ioctl and mmap won't get disturbed with -1 fd.
The reason for supporting this is to ease up monitoring group of pids,
that 'disappear' before perf opens their event. This currently leads
perf to report error and exit and makes perf record's -u option unusable
under certain setup.
With this change we will allow this race and ignore such failure with
following warning:
WARNING: Ignored open failure for pid 8605
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161213074622.GA3084@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's more readable and will ease up following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481538943-21874-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. those parameters/functions _are_ used, so ditch that misleading attribute.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-13cqtjh0yojg5gzvpq1zzpl0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --idle-hist option is to analyze system idle state so which process
makes cpu to go idle. If this option is specified, non-idle events will
be skipped and processes switching to/from idle will be shown.
This option is mostly useful when used with --summary(-only) option. In
the idle-time summary view, idle time is accounted to previous thread
which is run before idle task.
The example output looks like following:
Idle-time summary
comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations
(count) (msec) (msec) (msec) (msec) %
--------------------------------------------------------------------------------------------
rcu_preempt[7] 2 95 550.872 0.011 5.798 23.146 7.63 0
migration/1[16] 2 1 15.558 15.558 15.558 15.558 0.00 0
khugepaged[39] 2 1 3.062 3.062 3.062 3.062 0.00 0
kworker/0:1H[124] 2 2 4.728 0.611 2.364 4.116 74.12 0
systemd-journal[167] 1 1 4.510 4.510 4.510 4.510 0.00 0
kworker/u16:3[558] 2 13 74.737 0.080 5.749 12.960 21.96 0
irq/34-iwlwifi[628] 2 21 118.403 0.032 5.638 23.990 24.00 0
kworker/u17:0[673] 2 1 3.523 3.523 3.523 3.523 0.00 0
dbus-daemon[722] 1 1 6.743 6.743 6.743 6.743 0.00 0
ifplugd[741] 1 1 58.826 58.826 58.826 58.826 0.00 0
wpa_supplicant[1490] 1 1 13.302 13.302 13.302 13.302 0.00 0
wpa_actiond[1492] 1 2 4.064 0.168 2.032 3.896 91.72 0
dockerd[1500] 1 1 0.055 0.055 0.055 0.055 0.00 0
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org
Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org
[ Merged fix sent by Namhyumg, as posted in the second Link: tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes it only focuses on idle-related events like upcoming idle-hist
feature. In this case we don't want to see other event to reduce noise.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to investigate the idleness reason, it is necessary to keep the
callchains when entering idle. This can be identified by the
sched:sched_switch event having the next_pid field as 0.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-4-namhyung@kernel.org
Link: http://lkml.kernel.org/r/20161213080632.19099-1-namhyung@kernel.org
[ Merged fix from Namhyung, see second Link: tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct idle_time_data is to keep idle stats with callchains entering
to the idle task. The normal thread_runtime calculation is done
transparently since it extends the struct thread_runtime.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-3-namhyung@kernel.org
[ Align struct field names ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The is_idle_sample() function actually does more than determining
whether sample come from idle task. Split the callchain part into
save_task_callchain() to make it clearer.
Also checking prev_pid from trace data looks preferred than just
checking sample->pid since it's possible, although rare, to have invalid
0 pid/tid on scheduling an exiting task.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-2-namhyung@kernel.org
[ Remove some needless () in some return statements ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make it nicer and easily maintainable.
Also moving the check into fixdep sub make, so its output is not
scattered around the build output.
Removing extra $$ from mman*.h checks.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481030331-31944-5-git-send-email-jolsa@kernel.org
[ Use /bin/sh, and 'function check() {' -> 'check () {' to make it work with busybox, in Alpine Linux, for instance ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
make already provides the current working directory in a variable, so make
use of it instead of forking a shell. Also replace usage of PWD by
CURDIR. PWD is provided by most shells, but not all, so this makes the
build system more robust.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
The fact that the --children option is enabled by default is buried deep
at the end of the help page, in the overhead calculation section. This
make it explicit right where the option is listed, following the same
way other default options are described
Signed-off-by: Yannick Brosseau <scientist@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20161202160732.29058-1-scientist@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It treats the idle_max_cpu little bit confusingly IMHO. Let's make it
more straight forward.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes samples have tid of 0 but non-0 pid. It ends up having a new
thread of 0 tid/pid (instead of referring idle task) since tid is used
to search matching task. But I guess it's wrong to use 0 as a tid when
pid is set. This patch uses tid only if it has a non-zero value or same
as pid (of 0).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callchain_cursor__copy() function is to save current callchain
captured by a cursor. It'll be used to keep callchains when switching
to idle task for each cpu.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -D/--dump-raw-trace option is in the parent option so no need to
repeat it. Also move -f/--force option to parent as it's common to
handle data file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo reported an unhelpful error message when running perf sched
timehist on a file that did not contain sched tracepoints:
[root@jouet ~]# perf sched timehist
No trace sample to read. Did you call 'perf record -R'?
[root@jouet ~]# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
Change the has_traces check to look for the sched_switch event. Analysis
for perf sched timehist requires at least this event.
Now when analyzing a file without sched tracepoints you get:
root@f21-vbox:/tmp$ perf sched timehist
No sched_switch events found. Have you run 'perf sched record'?
Signed-off-by: David Ahern <dsahern@gmail.com>
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480451988-43673-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because there's no need for them in fixdep build.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481030331-31944-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fixdep tool needs to be built before everything else, because it fixes
every object dependency file.
We handle this currently by making all objects to depend on fixdep, which is
error prone and is easily forgotten when new object is added.
Instead of this, this patch force fixdep tool to be built as the first target
in the separate make session. This way we don't need to handle extra fixdep
dependencies and we are certain there's no fixdep race with any parallel make
job.
Committer notes:
Testing it:
Before:
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make -k O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
GEN /tmp/build/perf/common-cmds.h
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
MKDIR /tmp/build/perf/pmu-events/
HOSTCC /tmp/build/perf/pmu-events/json.o
MKDIR /tmp/build/perf/pmu-events/
HOSTCC /tmp/build/perf/pmu-events/jsmn.o
HOSTCC /tmp/build/perf/pmu-events/jevents.o
HOSTLD /tmp/build/perf/pmu-events/jevents-in.o
PERF_VERSION = 4.9.rc8.g868cd5
CC /tmp/build/perf/perf-read-vdso32
<SNIP>
After:
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make -k O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
GEN /tmp/build/perf/common-cmds.h
MKDIR /tmp/build/perf/fd/
CC /tmp/build/perf/fd/array.o
LD /tmp/build/perf/fd/libapi-in.o
MKDIR /tmp/build/perf/fs/
CC /tmp/build/perf/event-parse.o
CC /tmp/build/perf/fs/fs.o
PERF_VERSION = 4.9.rc8.g57a92f
CC /tmp/build/perf/event-plugin.o
MKDIR /tmp/build/perf/fs/
CC /tmp/build/perf/fs/tracing_path.o
<SNIP>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481030331-31944-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An upcoming fixdep fix needs all targets at the same area, so they'll
fit under a signal condition block.
Moving PERF-VERSION-FILE target into rules section.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481030331-31944-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
