forked from Minki/linux
9b0dfef475
9831 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
wenxu
|
7baf2429a1 |
net/sched: cls_flower add CT_FLAGS_INVALID flag support
This patch add the TCA_FLOWER_KEY_CT_FLAGS_INVALID flag to match the ct_state with invalid for conntrack. Signed-off-by: wenxu <wenxu@ucloud.cn> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/1611045110-682-1-git-send-email-wenxu@ucloud.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Jarod Wilson
|
7b8fc0103b |
bonding: add a vlan+srcmac tx hashing option
This comes from an end-user request, where they're running multiple VMs on hosts with bonded interfaces connected to some interest switch topologies, where 802.3ad isn't an option. They're currently running a proprietary solution that effectively achieves load-balancing of VMs and bandwidth utilization improvements with a similar form of transmission algorithm. Basically, each VM has it's own vlan, so it always sends its traffic out the same interface, unless that interface fails. Traffic gets split between the interfaces, maintaining a consistent path, with failover still available if an interface goes down. Unlike bond_eth_hash(), this hash function is using the full source MAC address instead of just the last byte, as there are so few components to the hash, and in the no-vlan case, we would be returning just the last byte of the source MAC as the hash value. It's entirely possible to have two NICs in a bond with the same last byte of their MAC, but not the same MAC, so this adjustment should guarantee distinct hashes in all cases. This has been rudimetarily tested to provide similar results to the proprietary solution it is aiming to replace. A patch for iproute2 is also posted, to properly support the new mode there as well. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Thomas Davis <tadavis@lbl.gov> Signed-off-by: Jarod Wilson <jarod@redhat.com> Link: https://lore.kernel.org/r/20210119010927.1191922-1-jarod@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Pravin B Shelar
|
9ab7e76aef |
GTP: add support for flow based tunneling API
Following patch add support for flow based tunneling API to send and recv GTP tunnel packet over tunnel metadata API. This would allow this device integration with OVS or eBPF using flow based tunneling APIs. Signed-off-by: Pravin B Shelar <pbshelar@fb.com> Link: https://lore.kernel.org/r/20210110070021.26822-1-pbshelar@fb.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Jakub Kicinski
|
2d9116be76 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-01-16
1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support,
that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman.
2) Add support for using kernel module global variables (__ksym externs in BPF
programs) retrieved via module's BTF, from Andrii Nakryiko.
3) Generalize BPF stackmap's buildid retrieval and add support to have buildid
stored in mmap2 event for perf, from Jiri Olsa.
4) Various fixes for cross-building BPF sefltests out-of-tree which then will
unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker.
5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann.
6) Clean up driver's XDP buffer init and split into two helpers to init per-
descriptor and non-changing fields during processing, from Lorenzo Bianconi.
7) Minor misc improvements to libbpf & bpftool, from Ian Rogers.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
perf: Add build id data in mmap2 event
bpf: Add size arg to build_id_parse function
bpf: Move stack_map_get_build_id into lib
bpf: Document new atomic instructions
bpf: Add tests for new BPF atomic operations
bpf: Add bitwise atomic instructions
bpf: Pull out a macro for interpreting atomic ALU operations
bpf: Add instructions for atomic_[cmp]xchg
bpf: Add BPF_FETCH field / create atomic_fetch_add instruction
bpf: Move BPF_STX reserved field check into BPF_STX verifier code
bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
bpf: x86: Factor out a lookup table for some ALU opcodes
bpf: x86: Factor out emission of REX byte
bpf: x86: Factor out emission of ModR/M for *(reg + off)
tools/bpftool: Add -Wall when building BPF programs
bpf, libbpf: Avoid unused function warning on bpf_tail_call_static
selftests/bpf: Install btf_dump test cases
selftests/bpf: Fix installation of urandom_read
selftests/bpf: Move generated test files to $(TEST_GEN_FILES)
selftests/bpf: Fix out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20210116012922.17823-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
Jiri Olsa
|
88a16a1309 |
perf: Add build id data in mmap2 event
Adding support to carry build id data in mmap2 event.
The build id data replaces maj/min/ino/ino_generation
fields, which are also used to identify map's binary,
so it's ok to replace them with build id data:
union {
struct {
u32 maj;
u32 min;
u64 ino;
u64 ino_generation;
};
struct {
u8 build_id_size;
u8 __reserved_1;
u16 __reserved_2;
u8 build_id[20];
};
};
Replaced maj/min/ino/ino_generation fields give us size
of 24 bytes. We use 20 bytes for build id data, 1 byte
for size and rest is unused.
There's new misc bit for mmap2 to signal there's build
id data in it:
#define PERF_RECORD_MISC_MMAP_BUILD_ID (1 << 14)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-4-jolsa@kernel.org
|
||
|
Jakub Kicinski
|
1d9f03c0a1 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Brendan Jackman
|
5ffa25502b |
bpf: Add instructions for atomic_[cmp]xchg
This adds two atomic opcodes, both of which include the BPF_FETCH flag. XCHG without the BPF_FETCH flag would naturally encode atomic_set. This is not supported because it would be of limited value to userspace (it doesn't imply any barriers). CMPXCHG without BPF_FETCH woulud be an atomic compare-and-write. We don't have such an operation in the kernel so it isn't provided to BPF either. There are two significant design decisions made for the CMPXCHG instruction: - To solve the issue that this operation fundamentally has 3 operands, but we only have two register fields. Therefore the operand we compare against (the kernel's API calls it 'old') is hard-coded to be R0. x86 has similar design (and A64 doesn't have this problem). A potential alternative might be to encode the other operand's register number in the immediate field. - The kernel's atomic_cmpxchg returns the old value, while the C11 userspace APIs return a boolean indicating the comparison result. Which should BPF do? A64 returns the old value. x86 returns the old value in the hard-coded register (and also sets a flag). That means return-old-value is easier to JIT, so that's what we use. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-8-jackmanb@google.com |
||
|
Brendan Jackman
|
5ca419f286 |
bpf: Add BPF_FETCH field / create atomic_fetch_add instruction
The BPF_FETCH field can be set in bpf_insn.imm, for BPF_ATOMIC instructions, in order to have the previous value of the atomically-modified memory location loaded into the src register after an atomic op is carried out. Suggested-by: Yonghong Song <yhs@fb.com> Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-7-jackmanb@google.com |
||
|
Brendan Jackman
|
91c960b005 |
bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
A subsequent patch will add additional atomic operations. These new operations will use the same opcode field as the existing XADD, with the immediate discriminating different operations. In preparation, rename the instruction mode BPF_ATOMIC and start calling the zero immediate BPF_ADD. This is possible (doesn't break existing valid BPF progs) because the immediate field is currently reserved MBZ and BPF_ADD is zero. All uses are removed from the tree but the BPF_XADD definition is kept around to avoid breaking builds for people including kernel headers. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com |
||
|
Brendan Jackman
|
c6458e72f6 |
bpf: Clarify return value of probe str helpers
When the buffer is too small to contain the input string, these helpers return the length of the buffer, not the length of the original string. This tries to make the docs totally clear about that, since "the length of the [copied ]string" could also refer to the length of the input. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: KP Singh <kpsingh@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210112123422.2011234-1-jackmanb@google.com |
||
Danilo Carvalho
|
ad0bfc233a |
Fix whitespace in uapi/linux/tcp.h.
List of things fixed: - Two of the socket options were idented with spaces instead of tabs. - Trailing whitespace in some lines. - Improper spacing around parenthesis caught by checkpatch.pl. - Mix of space and tabs in tcp_word_hdr union. Signed-off-by: Danilo Carvalho <doak@google.com> Link: https://lore.kernel.org/r/20210108222104.2079472-1-doak@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Linus Torvalds
|
ed41fd071c |
block-5.11-2021-01-10
-----BEGIN PGP SIGNATURE-----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=CClj
-----END PGP SIGNATURE-----
Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Missing CRC32 selections (Arnd)
- Fix for a merge window regression with bdev inode init (Christoph)
- bcache fixes
- rnbd fixes
- NVMe pull request from Christoph:
- fix a race in the nvme-tcp send code (Sagi Grimberg)
- fix a list corruption in an nvme-rdma error path (Israel Rukshin)
- avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar)
- add the susystem NQN quirk for a Samsung driver (Gopal Tiwari)
- fix two compiler warnings in nvme-fcloop (James Smart)
- don't call sleeping functions from irq context in nvme-fc (James Smart)
- remove an unused argument (Max Gurtovoy)
- remove unused exports (Minwoo Im)
- Use-after-free fix for partition iteration (Ming)
- Missing blk-mq debugfs flag annotation (John)
- Bdev freeze regression fix (Satya)
- blk-iocost NULL pointer deref fix (Tejun)
* tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits)
bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET
bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket
bcache: check unsupported feature sets for bcache register
bcache: fix typo from SUUP to SUPP in features.h
bcache: set pdev_set_uuid before scond loop iteration
blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
block/rnbd-clt: avoid module unload race with close confirmation
block/rnbd: Adding name to the Contributors List
block/rnbd-clt: Fix sg table use after free
block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close
block/rnbd: Select SG_POOL for RNBD_CLIENT
block: pre-initialize struct block_device in bdev_alloc_inode
fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb
nvme: remove the unused status argument from nvme_trace_bio_complete
nvmet-rdma: Fix list_del corruption on queue establishment failure
nvme: unexport functions with no external caller
nvme: avoid possible double fetch in handling CQE
nvme-tcp: Fix possible race of io_work and direct send
nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings
...
|
||
|
Linus Torvalds
|
e07cd2f3e7 |
Char/Misc driver fixes for 5.11-rc3
Here are some small char and misc driver fixes for 5.11-rc3. the majority here are fixes for the habanalabs drivers, but also in here are: - crypto driver fix - pvpanic driver fix - updated font file - interconnect driver fixes All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX/sJUw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ym3/wCfYVaYBcHzr0CATzOXEbtpBlMpkkMAn1M/pOET 6RuyBJCjONwT8g4BzOq1 =jlAi -----END PGP SIGNATURE----- Merge tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.11-rc3. The majority here are fixes for the habanalabs drivers, but also in here are: - crypto driver fix - pvpanic driver fix - updated font file - interconnect driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits) Fonts: font_ter16x32: Update font with new upstream Terminus release misc: pvpanic: Check devm_ioport_map() for NULL speakup: Add github repository URL and bug tracker MAINTAINERS: Update Georgi's email address crypto: asym_tpm: correct zero out potential secrets habanalabs: Fix memleak in hl_device_reset interconnect: imx8mq: Use icc_sync_state interconnect: imx: Remove a useless test interconnect: imx: Add a missing of_node_put after of_device_is_available interconnect: qcom: fix rpmh link failures habanalabs: fix order of status check habanalabs: register to pci shutdown callback habanalabs: add validation cs counter, fix misplaced counters habanalabs/gaudi: retry loading TPC f/w on -EINTR habanalabs: adjust pci controller init to new firmware habanalabs: update comment in hl_boot_if.h habanalabs/gaudi: enhance reset message habanalabs: full FW hard reset support habanalabs/gaudi: disable CGM at HW initialization habanalabs: Revise comment to align with mirror list name ... |
||
Geliang Tang
|
0f9f696a50 |
mptcp: add set_flags command in PM netlink
This patch added a new command MPTCP_PM_CMD_SET_FLAGS in PM netlink: In mptcp_nl_cmd_set_flags, parse the input address, get the backup value according to whether the address's FLAG_BACKUP flag is set from the user-space. Then check whether this address had been added in the local address list. If it had been, then call mptcp_nl_addr_backup to deal with this address. In mptcp_nl_addr_backup, traverse all the existing msk sockets to find the relevant sockets, and call mptcp_pm_nl_mp_prio_send_ack to send out a MP_PRIO ACK packet. Finally in mptcp_nl_cmd_set_flags, set or clear the address's FLAG_BACKUP flag. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Coly Li
|
b16671e8f4 |
bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket
When large bucket feature was added, BCH_FEATURE_INCOMPAT_LARGE_BUCKET
was introduced into the incompat feature set. It used bucket_size_hi
(which was added at the tail of struct cache_sb_disk) to extend current
16bit bucket size to 32bit with existing bucket_size in struct
cache_sb_disk.
This is not a good idea, there are two obvious problems,
- Bucket size is always value power of 2, if store log2(bucket size) in
existing bucket_size of struct cache_sb_disk, it is unnecessary to add
bucket_size_hi.
- Macro csum_set() assumes d[SB_JOURNAL_BUCKETS] is the last member in
struct cache_sb_disk, bucket_size_hi was added after d[] which makes
csum_set calculate an unexpected super block checksum.
To fix the above problems, this patch introduces a new incompat feature
bit BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE, when this bit is set, it
means bucket_size in struct cache_sb_disk stores the order of power-of-2
bucket size value. When user specifies a bucket size larger than 32768
sectors, BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE will be set to
incompat feature set, and bucket_size stores log2(bucket size) more
than store the real bucket size value.
The obsoleted BCH_FEATURE_INCOMPAT_LARGE_BUCKET won't be used anymore,
it is renamed to BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET and still only
recognized by kernel driver for legacy compatible purpose. The previous
bucket_size_hi is renmaed to obso_bucket_size_hi in struct cache_sb_disk
and not used in bcache-tools anymore.
For cache device created with BCH_FEATURE_INCOMPAT_LARGE_BUCKET feature,
bcache-tools and kernel driver still recognize the feature string and
display it as "obso_large_bucket".
With this change, the unnecessary extra space extend of bcache on-disk
super block can be avoided, and csum_set() may generate expected check
sum as well.
Fixes:
|
||
|
Linus Torvalds
|
2a190b22aa |
x86:
* Fixes for the new scalable MMU * Fixes for migration of nested hypervisors on AMD * Fix for clang integrated assembler * Fix for left shift by 64 (UBSAN) * Small cleanups * Straggler SEV-ES patch ARM: * VM init cleanups * PSCI relay cleanups * Kill CONFIG_KVM_ARM_PMU * Fixup __init annotations * Fixup reg_to_encoding() * Fix spurious PMCR_EL0 access * selftests cleanups -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl/4YOMUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroMg0Qf/eGDOoLL18KhA9MpoPXusR5kU+82G AcbFj9siNW46EF7mL+sw/xAx+gZaqSpIEmn/f6BzgiaUBdFTv9CKX3B54e43e59G HAKD0NpqwvDIi1b0T6bcgC92mY3Qx/IDCc7/9JYjBs/iORfqyWW6xVtkF/Gfymxt eK+MnfMqqNZODgR/cZnCH1E48fuwOvRMxLqilLi3OOMSUfs2cQOSLTNfYQYqjeaJ dsQ4YeyPJO5JHtfHFr6VPIo/jDhowniac9CNvOomWWVIx2zPYVSl9d8ub6ESEPNF GM7UeBCOMmZG/a3qFEZPAUJ7znW4yYE85Z6pjxlrGhd1I54MJi4dd+RApw== =5Nfj -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "x86: - Fixes for the new scalable MMU - Fixes for migration of nested hypervisors on AMD - Fix for clang integrated assembler - Fix for left shift by 64 (UBSAN) - Small cleanups - Straggler SEV-ES patch ARM: - VM init cleanups - PSCI relay cleanups - Kill CONFIG_KVM_ARM_PMU - Fixup __init annotations - Fixup reg_to_encoding() - Fix spurious PMCR_EL0 access Misc: - selftests cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (38 commits) KVM: x86: __kvm_vcpu_halt can be static KVM: SVM: Add support for booting APs in an SEV-ES guest KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest mode KVM: nSVM: correctly restore nested_run_pending on migration KVM: x86/mmu: Clarify TDP MMU page list invariants KVM: x86/mmu: Ensure TDP MMU roots are freed after yield kvm: check tlbs_dirty directly KVM: x86: change in pv_eoi_get_pending() to make code more readable MAINTAINERS: Really update email address for Sean Christopherson KVM: x86: fix shift out of bounds reported by UBSAN KVM: selftests: Implement perf_test_util more conventionally KVM: selftests: Use vm_create_with_vcpus in create_vm KVM: selftests: Factor out guest mode code KVM/SVM: Remove leftover __svm_vcpu_run prototype from svm.c KVM: SVM: Add register operand to vmsave call in sev_es_vcpu_load KVM: x86/mmu: Optimize not-present/MMIO SPTE check in get_mmio_spte() KVM: x86/mmu: Use raw level to index into MMIO walks' sptes array KVM: x86/mmu: Get root level from walkers when retrieving MMIO SPTE KVM: x86/mmu: Use -1 to flag an undefined spte in get_mmio_spte() ... |
||
Tom Lendacky
|
647daca25d |
KVM: SVM: Add support for booting APs in an SEV-ES guest
Typically under KVM, an AP is booted using the INIT-SIPI-SIPI sequence, where the guest vCPU register state is updated and then the vCPU is VMRUN to begin execution of the AP. For an SEV-ES guest, this won't work because the guest register state is encrypted. Following the GHCB specification, the hypervisor must not alter the guest register state, so KVM must track an AP/vCPU boot. Should the guest want to park the AP, it must use the AP Reset Hold exit event in place of, for example, a HLT loop. First AP boot (first INIT-SIPI-SIPI sequence): Execute the AP (vCPU) as it was initialized and measured by the SEV-ES support. It is up to the guest to transfer control of the AP to the proper location. Subsequent AP boot: KVM will expect to receive an AP Reset Hold exit event indicating that the vCPU is being parked and will require an INIT-SIPI-SIPI sequence to awaken it. When the AP Reset Hold exit event is received, KVM will place the vCPU into a simulated HLT mode. Upon receiving the INIT-SIPI-SIPI sequence, KVM will make the vCPU runnable. It is again up to the guest to then transfer control of the AP to the proper location. To differentiate between an actual HLT and an AP Reset Hold, a new MP state is introduced, KVM_MP_STATE_AP_RESET_HOLD, which the vCPU is placed in upon receiving the AP Reset Hold exit event. Additionally, to communicate the AP Reset Hold exit event up to userspace (if needed), a new exit reason is introduced, KVM_EXIT_AP_RESET_HOLD. A new x86 ops function is introduced, vcpu_deliver_sipi_vector, in order to accomplish AP booting. For VMX, vcpu_deliver_sipi_vector is set to the original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(). SVM adds a new function that, for non SEV-ES guests, invokes the original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(), but for SEV-ES guests, implements the logic above. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <e8fbebe8eb161ceaabdad7c01a5859a78b424d5e.1609791600.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Paolo Bonzini
|
bc351f0726 |
Merge branch 'kvm-master' into kvm-next
Fixes to get_mmio_spte, destined to 5.10 stable branch. |
||
|
Jakub Kicinski
|
cf07206971 |
net: suggest L2 discards be counted towards rx_dropped
From the existing definitions it's unclear which stat to use to report filtering based on L2 dst addr in old broadcast-medium Ethernet. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
aa35e45cd4 |
Networking fixes for 5.11-rc3, including fixes from netfilter, wireless
and bpf trees.
Current release - regressions:
- mt76: - usb: fix NULL pointer dereference in mt76u_status_worker
- sdio: fix NULL pointer dereference in mt76s_process_tx_queue
- net: ipa: fix interconnect enable bug
Current release - always broken:
- netfilter: ipset: fixes possible oops in mtype_resize
- ath11k: fix number of coding issues found by static analysis tools
and spurious error messages
Previous releases - regressions:
- e1000e: re-enable s0ix power saving flows for systems with
the Intel i219-LM Ethernet controllers to fix power
use regression
- virtio_net: fix recursive call to cpus_read_lock() to avoid
a deadlock
- ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
- net-sysfs: take the rtnl lock around XPS configuration
- xsk: - fix memory leak for failed bind
- rollback reservation at NETDEV_TX_BUSY
- r8169: work around power-saving bug on some chip versions
Previous releases - always broken:
- dcb: validate netlink message in DCB handler
- tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
to prevent unnecessary retries
- vhost_net: fix ubuf refcount when sendmsg fails
- bpf: save correct stopping point in file seq iteration
- ncsi: use real net-device for response handler
- neighbor: fix div by zero caused by a data race (TOCTOU)
- bareudp: - fix use of incorrect min_headroom size
- fix false positive lockdep splat from the TX lock
- net: mvpp2: - clear force link UP during port init procedure
in case bootloader had set it
- add TCAM entry to drop flow control pause frames
- fix PPPoE with ipv6 packet parsing
- fix GoP Networking Complex Control config of port 3
- fix pkt coalescing IRQ-threshold configuration
- xsk: fix race in SKB mode transmit with shared cq
- ionic: account for vlan tag len in rx buffer len
- net: stmmac: ignore the second clock input, current clock framework
does not handle exclusive clock use well, other drivers
may reconfigure the second clock
Misc:
- ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
existing scheme
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=N4/x
-----END PGP SIGNATURE-----
Merge tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, wireless and bpf
trees.
Current release - regressions:
- mt76: fix NULL pointer dereference in mt76u_status_worker and
mt76s_process_tx_queue
- net: ipa: fix interconnect enable bug
Current release - always broken:
- netfilter: fixes possible oops in mtype_resize in ipset
- ath11k: fix number of coding issues found by static analysis tools
and spurious error messages
Previous releases - regressions:
- e1000e: re-enable s0ix power saving flows for systems with the
Intel i219-LM Ethernet controllers to fix power use regression
- virtio_net: fix recursive call to cpus_read_lock() to avoid a
deadlock
- ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
- sysfs: take the rtnl lock around XPS configuration
- xsk: fix memory leak for failed bind and rollback reservation at
NETDEV_TX_BUSY
- r8169: work around power-saving bug on some chip versions
Previous releases - always broken:
- dcb: validate netlink message in DCB handler
- tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
to prevent unnecessary retries
- vhost_net: fix ubuf refcount when sendmsg fails
- bpf: save correct stopping point in file seq iteration
- ncsi: use real net-device for response handler
- neighbor: fix div by zero caused by a data race (TOCTOU)
- bareudp: fix use of incorrect min_headroom size and a false
positive lockdep splat from the TX lock
- mvpp2:
- clear force link UP during port init procedure in case
bootloader had set it
- add TCAM entry to drop flow control pause frames
- fix PPPoE with ipv6 packet parsing
- fix GoP Networking Complex Control config of port 3
- fix pkt coalescing IRQ-threshold configuration
- xsk: fix race in SKB mode transmit with shared cq
- ionic: account for vlan tag len in rx buffer len
- stmmac: ignore the second clock input, current clock framework does
not handle exclusive clock use well, other drivers may reconfigure
the second clock
Misc:
- ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
existing scheme"
* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
r8169: work around power-saving bug on some chip versions
net: usb: qmi_wwan: add Quectel EM160R-GL
selftests: mlxsw: Set headroom size of correct port
net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
ibmvnic: fix: NULL pointer dereference.
docs: networking: packet_mmap: fix old config reference
docs: networking: packet_mmap: fix formatting for C macros
vhost_net: fix ubuf refcount incorrectly when sendmsg fails
bareudp: Fix use of incorrect min_headroom size
bareudp: set NETIF_F_LLTX flag
net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
atlantic: remove architecture depends
erspan: fix version 1 check in gre_parse_header()
net: hns: fix return value check in __lb_other_process()
net: sched: prevent invalid Scell_log shift count
net: neighbor: fix a crash caused by mod zero
ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
...
|
||
Pablo Neira Ayuso
|
b4e70d8dd9 |
netfilter: nftables: add set expression flags
The set flag NFT_SET_EXPR provides a hint to the kernel that userspace supports for multiple expressions per set element. In the same direction, NFT_DYNSET_F_EXPR specifies that dynset expression defines multiple expressions per set element. This allows new userspace software with old kernels to bail out with EOPNOTSUPP. This update is similar to |
||
Alon Mizrahi
|
a3fd283063 |
habanalabs: add validation cs counter, fix misplaced counters
Up until now validation errors were counted in the parsing field of the cs_counters struct, so we added a new counter and increased it when needed. In addition, there were some locations where only one of the counters was updated (ctx or aggregate) so add the second one to be updated as well. Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> |
||
|
Alon Mizrahi
|
429f1571e8 |
habanalabs: add comment for pll frequency ioctl opcode
Forgot to add the comment for the opcode when it was added. Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> |
||
|
Linus Torvalds
|
64145482d3 |
virtio,vdpa: features, cleanups, fixes
vdpa sim refactoring virtio mem Big Block Mode support misc cleanus, fixes Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl/gznEPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpu/cIAJSVWVCs/5KVfeOg6NQ5WRK48g58eZoaIS6z jr5iyCRfoQs3tQgcX0W02X3QwVwesnpepF9FChFwexlh+Te3tWXKaDj3eWBmlJVh Hg8bMOOiOqY7qh47LsGbmb2pnJ3Tg8uwuTz+w/6VDc43CQa7ganwSl0owqye3ecm IdGbIIXZQs55FCzM8hwOWWpjsp1C2lRtjefsOc5AbtFjzGk+7767YT+C73UgwcSi peHbD8YFJTInQj6JCbF7uYYAWHrOFAOssWE3OwKtZJdTdJvE7bMgSZaYvUgHMvFR gRycqxpLAg6vcuns4qjiYafrywvYwEvTkPIXmMG6IAgNYIPAxK0= =SmPb -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - vdpa sim refactoring - virtio mem: Big Block Mode support - misc cleanus, fixes * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (61 commits) vdpa: Use simpler version of ida allocation vdpa: Add missing comment for virtqueue count uapi: virtio_ids: add missing device type IDs from OASIS spec uapi: virtio_ids.h: consistent indentions vhost scsi: fix error return code in vhost_scsi_set_endpoint() virtio_ring: Fix two use after free bugs virtio_net: Fix error code in probe() virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed() tools/virtio: add barrier for aarch64 tools/virtio: add krealloc_array tools/virtio: include asm/bug.h vdpa/mlx5: Use write memory barrier after updating CQ index vdpa: split vdpasim to core and net modules vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov vdpa_sim: make vdpasim->buffer size configurable vdpa_sim: use kvmalloc to allocate vdpasim->buffer vdpa_sim: set vringh notify callback vdpa_sim: add set_config callback in vdpasim_dev_attr vdpa_sim: add get_config callback in vdpasim_dev_attr vdpa_sim: make 'config' generic and usable for any device type ... |
||
Guillaume Nault
|
bcce55f556 |
ppp: Fix PPPIOCUNBRIDGECHAN request number
PPPIOCGL2TPSTATS already uses 54. This shouldn't be a problem in
practice, but let's keep the logical decreasing assignment scheme.
Fixes:
|
||
|
Linus Torvalds
|
6a447b0e31 |
ARM:
* PSCI relay at EL2 when "protected KVM" is enabled * New exception injection code * Simplification of AArch32 system register handling * Fix PMU accesses when no PMU is enabled * Expose CSV3 on non-Meltdown hosts * Cache hierarchy discovery fixes * PV steal-time cleanups * Allow function pointers at EL2 * Various host EL2 entry cleanups * Simplification of the EL2 vector allocation s390: * memcg accouting for s390 specific parts of kvm and gmap * selftest for diag318 * new kvm_stat for when async_pf falls back to sync x86: * Tracepoints for the new pagetable code from 5.10 * Catch VFIO and KVM irqfd events before userspace * Reporting dirty pages to userspace with a ring buffer * SEV-ES host support * Nested VMX support for wait-for-SIPI activity state * New feature flag (AVX512 FP16) * New system ioctl to report Hyper-V-compatible paravirtualization features Generic: * Selftest improvements -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl/bdL4UHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroNgQQgAnTH6rhXa++Zd5F0EM2NwXwz3iEGb lOq1DZSGjs6Eekjn8AnrWbmVQr+CBCuGU9MrxpSSzNDK/awryo3NwepOWAZw9eqk BBCVwGBbJQx5YrdgkGC0pDq2sNzcpW/VVB3vFsmOxd9eHblnuKSIxEsCCXTtyqIt XrLpQ1UhvI4yu102fDNhuFw2EfpzXm+K0Lc0x6idSkdM/p7SyeOxiv8hD4aMr6+G bGUQuMl4edKZFOWFigzr8NovQAvDHZGrwfihu2cLRYKLhV97QuWVmafv/yYfXcz2 drr+wQCDNzDOXyANnssmviazrhOX0QmTAhbIXGGX/kTxYKcfPi83ZLoI3A== =ISud -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM updates from Paolo Bonzini: "Much x86 work was pushed out to 5.12, but ARM more than made up for it. ARM: - PSCI relay at EL2 when "protected KVM" is enabled - New exception injection code - Simplification of AArch32 system register handling - Fix PMU accesses when no PMU is enabled - Expose CSV3 on non-Meltdown hosts - Cache hierarchy discovery fixes - PV steal-time cleanups - Allow function pointers at EL2 - Various host EL2 entry cleanups - Simplification of the EL2 vector allocation s390: - memcg accouting for s390 specific parts of kvm and gmap - selftest for diag318 - new kvm_stat for when async_pf falls back to sync x86: - Tracepoints for the new pagetable code from 5.10 - Catch VFIO and KVM irqfd events before userspace - Reporting dirty pages to userspace with a ring buffer - SEV-ES host support - Nested VMX support for wait-for-SIPI activity state - New feature flag (AVX512 FP16) - New system ioctl to report Hyper-V-compatible paravirtualization features Generic: - Selftest improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits) KVM: SVM: fix 32-bit compilation KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting KVM: SVM: Provide support to launch and run an SEV-ES guest KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests KVM: SVM: Provide support for SEV-ES vCPU loading KVM: SVM: Provide support for SEV-ES vCPU creation/loading KVM: SVM: Update ASID allocation to support SEV-ES guests KVM: SVM: Set the encryption mask for the SVM host save area KVM: SVM: Add NMI support for an SEV-ES guest KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest KVM: SVM: Do not report support for SMM for an SEV-ES guest KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES KVM: SVM: Add support for CR8 write traps for an SEV-ES guest KVM: SVM: Add support for CR4 write traps for an SEV-ES guest KVM: SVM: Add support for CR0 write traps for an SEV-ES guest KVM: SVM: Add support for EFER write traps for an SEV-ES guest KVM: SVM: Support string IO operations for an SEV-ES guest KVM: SVM: Support MMIO for an SEV-ES guest KVM: SVM: Create trace events for VMGEXIT MSR protocol processing KVM: SVM: Create trace events for VMGEXIT processing ... |
||
|
Linus Torvalds
|
1db98bcf56 |
Merge branch 'akpm' (patches from Andrew)
Merge still more updates from Andrew Morton: "18 patches. Subsystems affected by this patch series: mm (memcg and cleanups) and epoll" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/Kconfig: fix spelling mistake "whats" -> "what's" selftests/filesystems: expand epoll with epoll_pwait2 epoll: wire up syscall epoll_pwait2 epoll: add syscall epoll_pwait2 epoll: convert internal api to timespec64 epoll: eliminate unnecessary lock for zero timeout epoll: replace gotos with a proper loop epoll: pull all code between fetch_events and send_event into the loop epoll: simplify and optimize busy loop logic epoll: move eavail next to the list_empty_careful check epoll: pull fatal signal checks into ep_send_events() epoll: simplify signal handling epoll: check for events when removing a timed out thread from the wait queue mm/memcontrol:rewrite mem_cgroup_page_lruvec() mm, kvm: account kvm_vcpu_mmap to kmemcg mm/memcg: remove unused definitions mm/memcg: warning on !memcg after readahead page charged mm/memcg: bail early from swap accounting if memcg disabled |
||
Willem de Bruijn
|
b0a0c2615f |
epoll: wire up syscall epoll_pwait2
Split off from prev patch in the series that implements the syscall. Link: https://lkml.kernel.org/r/20201121144401.3727659-4-willemdebruijn.kernel@gmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Enrico Weigelt, metux IT consult
|
be618636de |
uapi: virtio_ids: add missing device type IDs from OASIS spec
The OASIS virtio spec (1.1) defines several IDs that aren't reflected in the header yet. Fixing this by adding the missing IDs, even though they're not yet used by the kernel yet. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Link: https://lore.kernel.org/r/20201202111931.31953-2-info@metux.net Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Enrico Weigelt, metux IT consult
|
1e38f0031c |
uapi: virtio_ids.h: consistent indentions
Fixing the differing indentions to be consistent and properly aligned. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Link: https://lore.kernel.org/r/20201202111931.31953-1-info@metux.net Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Linus Torvalds
|
c59c7588fc |
UAPI Changes:
- Only enable char/agp uapi when CONFIG_DRM_LEGACY is set
Cross-subsystem Changes:
- vma_set_file helper to make vma->vm_file changing less brittle,
acked by Andrew
Core Changes:
- dma-buf heaps improvements
- pass full atomic modeset state to driver callbacks
- shmem helpers: cached bo by default
- cleanups for fbdev, fb-helpers
- better docs for drm modes and SCALING_FITLER uapi
- ttm: fix dma32 page pool regression
Driver Changes:
- multi-hop regression fixes for amdgpu, radeon, nouveau
- lots of small amdgpu hw enabling fixes (display, pm, ...)
- fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all
fairly minor
- some cleanups for legacy drm/fbdev drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEb4nG6jLu8Y5XI+PfTA9ye/CYqnEFAl/c2zIACgkQTA9ye/CY
qnGC2w//QBfbqpyBeRzs/PRx8U8qvI1f8ySGGXrh39zri9bwOG9KOOO5OKKEB0kW
oLuGXZtGP5L9wqAGu2EfjYGPwveEOlsC+CQtMC3krSa/7d69Xj/VysGV1MJVWPPA
FyZj8wbRDsFamQ0Ai7c7i0wXpchtJ3CT9VaY5FL46n7DrAM4sfmCjMqd7TWkkXss
GdFc4tkIw6dBC7H32fMGAUi3sl51YMvZRnDzs8ImRk2W5hEVr4wHyboaFl8/co6W
aakitufYcTPxK7nMFOlFXSZYBeeA7oOJqX4DQElLzxCndgkphjWiNb9EoGOlg3lH
lbvP896XoA5g1WDZ0AUiFbNyX/BAZrUedIuUdA/J/OBIAmCumrg6o6yRzZwE/wDQ
VeMCtZBUOIFv2uTrow1Ow+U/5Qa+REu3h/SLmR/BbGOLaw0A5XmKC9NN59Us9MSv
lKVlmOMlUQb4D32Bu5I6RPO9eo4MLa+ZidZkCMj/FCufKxj3MvZhkBNH9aSOqL2V
PCYBy5ixqbkhtXcYW+1Er9Tbz1R7Do6iYFdluvbQx8FkR2OgVlcmCXOxFVRy9xIh
qoXQGAwhMECv1WosPqElmLBqAocSWJfVGrsOClgldZgVX5R1QNv93iIcP29jgmTj
UBdvFJxRxmMBhEbnosWhb/wXzPIGWlEd0JzDSq6wdJlhWllho4k=
=BhU/
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Daniel Vetter:
"UAPI Changes:
- Only enable char/agp uapi when CONFIG_DRM_LEGACY is set
Cross-subsystem Changes:
- vma_set_file helper to make vma->vm_file changing less brittle,
acked by Andrew
Core Changes:
- dma-buf heaps improvements
- pass full atomic modeset state to driver callbacks
- shmem helpers: cached bo by default
- cleanups for fbdev, fb-helpers
- better docs for drm modes and SCALING_FITLER uapi
- ttm: fix dma32 page pool regression
Driver Changes:
- multi-hop regression fixes for amdgpu, radeon, nouveau
- lots of small amdgpu hw enabling fixes (display, pm, ...)
- fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all
fairly minor
- some cleanups for legacy drm/fbdev drivers"
* tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm: (117 commits)
drm/qxl: don't allocate a dma_address array
drm/nouveau: fix multihop when move doesn't work.
drm/i915/tgl: Fix REVID macros for TGL to fetch correct stepping
drm/i915: Fix mismatch between misplaced vma check and vma insert
drm/i915/perf: also include Gen11 in OATAILPTR workaround
Revert "drm/i915: re-order if/else ladder for hpd_irq_setup"
drm/amdgpu/disply: fix documentation warnings in display manager
drm/amdgpu: print mmhub client name for dimgrey_cavefish
drm/amdgpu: set mode1 reset as default for dimgrey_cavefish
drm/amd/display: Add get_dig_frontend implementation for DCEx
drm/radeon: remove h from printk format specifier
drm/amdgpu: remove h from printk format specifier
drm/amdgpu: Fix spelling mistake "Heterogenous" -> "Heterogeneous"
drm/amdgpu: fix regression in vbios reservation handling on headless
drm/amdgpu/SRIOV: Extend VF reset request wait period
drm/amdkfd: correct amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu log.
drm/amd/display: Adding prototype for dccg21_update_dpp_dto()
drm/amdgpu: print what method we are using for runtime pm
drm/amdgpu: simplify logic in atpx resume handling
drm/amdgpu: no need to call pci_ignore_hotplug for _PR3
...
|
||
|
Linus Torvalds
|
a409ed156a |
This is the bulk of the GPIO changes for the v5.11 kernel cycle:
Core changes:
- Retired the old set-up function for GPIO IRQ chips. All chips
now use the template struct gpio_irq_chip and pass that to the core
to be set up alongside the gpio_chip. We can finally get rid of
the old cruft.
- Some refactoring and clean up of the core code.
- Support edge event timestamps to be stamped using REALTIME
(wall clock) timestamps. We have found solid use cases for
this, so we support it.
New drivers:
- MStar MSC313 GPIO driver.
- HiSilicon GPIO driver.
Driver improvements:
- The PCA953x driver now also supports the NXP PCAL9554B/C chips.
- The mockup driver can now be probed from the device tree which
is pretty useful for virtual prototyping of devices.
- The Rcar driver now supports .get_multiple()
- The MXC driver dropped some legacy and became a pure device
tree client.
- The Exar driver was moved over to the IDA interface for
enumerating, and also switched over to using regmap for
register access.
-----BEGIN PGP SIGNATURE-----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=nrFU
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.11 kernel cycle:
Core changes:
- Retired the old set-up function for GPIO IRQ chips. All chips now
use the template struct gpio_irq_chip and pass that to the core to
be set up alongside the gpio_chip. We can finally get rid of the
old cruft.
- Some refactoring and clean up of the core code.
- Support edge event timestamps to be stamped using REALTIME (wall
clock) timestamps. We have found solid use cases for this, so we
support it.
New drivers:
- MStar MSC313 GPIO driver.
- HiSilicon GPIO driver.
Driver improvements:
- The PCA953x driver now also supports the NXP PCAL9554B/C chips.
- The mockup driver can now be probed from the device tree which is
pretty useful for virtual prototyping of devices.
- The Rcar driver now supports .get_multiple()
- The MXC driver dropped some legacy and became a pure device tree
client.
- The Exar driver was moved over to the IDA interface for
enumerating, and also switched over to using regmap for register
access"
* tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
MAINTAINERS: Remove reference to non-existing file
gpio: hisi: Do not require ACPI for COMPILE_TEST
MAINTAINERS: Add maintainer for HiSilicon GPIO driver
gpio: gpio-hisi: Add HiSilicon GPIO support
gpio: cs5535: Simplify the return expression of cs5535_gpio_probe()
gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask
dt-bindings: mt7621-gpio: convert bindings to YAML format
gpiolib: cdev: Flag invalid GPIOs as used
gpio: put virtual gpio device into their own submenu
drivers: gpio: amd8111: use SPDX-License-Identifier
drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk
drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk
gpio: Add TODO item for debugfs interface
gpio: just plain warning when nonexisting gpio requested
tools: gpio: add option to report wall-clock time to gpio-event-mon
tools: gpio: add support for reporting realtime event clock to lsgpio
gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
gpio: msc313: MStar MSC313 GPIO driver
dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
...
|
||
|
Linus Torvalds
|
e13300bdaa |
cifs/smb3 changes, the largest part are for support of the newer mount API, also includes addition of support for the SMB3 witness protocol which can provide important notifications from the server on address or export or network changes, and three patches for stable
-----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAl/bxgoACgkQiiy9cAdy T1HrVwv9E3lSCo8xvipqU4vto+I/29zVa7yjf2oY06LyHkgXEBzPYjhWtLN3KyF+ H6gnFUusyw4prteeFXUYatXYBhT3tK1fxeshUT7B+zk9eFGQca8WYockjEIiDci3 WcieEHH1xvDuwyPAomjpJFEQ70h+vXBREvtLZOAPxisKID+gKjncP0jncAFeFvhM Cln/s88YmG7vJZ78S1yIJqiD0PvUJOdYLrDz/Zmwh+m5UIs9N9clB1MVuLw+5vMe E5vG6Aeh3hCvwyVmGxTx4IEixV9hFR20XBvxTSnhyGQ4s+7DfcHmDDcmPHEnTcZ8 7U2Y1xUslx6nvoej9hlZDB1bEyMPNlI6GIYjDb6RiU18D3crgygat4SmgbPUV1up P6hqIy1NebskZjLEpVDIDNV7JWqucHzfJYfPW9B/LwiH72KMNhwQhZ9H1PqkzS7q WCeVKdc5vGhLyHEZJjHu3qOhCQQQ3cDh4akL5gWiYmwNDGQZjpVfhE4tzcMYWtSn WkxqLVA3 =YiLC -----END PGP SIGNATURE----- Merge tag '5.11-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs updates from Steve French: "The largest part are for support of the newer mount API which has been needed for cifs/smb3 mounts for a long time due to the new API's better handling of remount, and better error reporting. There are three additional small cleanup patches for this being tested, that are not included yet. This series also includes addition of support for the SMB3 witness protocol which can provide important notifications from the server to client on server address or export or network changes. This can be useful for example in order to be notified before the failure - when a server's IP address changes (in the future it will allow us to support server notifications of when a share is moved). It also includes three patches for stable e.g. some that better handle some confusing error messages during session establishment" * tag '5.11-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6: (55 commits) cifs: update internal module version number cifs: Fix support for remount when not changing rsize/wsize cifs: handle "guest" mount parameter cifs: correct four aliased mount parms to allow use of previous names cifs: Tracepoints and logs for tracing credit changes. cifs: fix use after free in cifs_smb3_do_mount() cifs: fix rsize/wsize to be negotiated values cifs: Fix some error pointers handling detected by static checker smb3: remind users that witness protocol is experimental cifs: update super_operations to show_devname cifs: fix uninitialized variable in smb3_fs_context_parse_param cifs: update mnt_cifs_flags during reconfigure cifs: move update of flags into a separate function cifs: remove ctx argument from cifs_setup_cifs_sb cifs: do not allow changing posix_paths during remount cifs: uncomplicate printing the iocharset parameter cifs: don't create a temp nls in cifs_setup_ipc cifs: simplify handling of cifs_sb/ctx->local_nls cifs: we do not allow changing username/password/unc/... during remount cifs: add initial reconfigure support ... |
||
|
Linus Torvalds
|
d64c6f96ba |
Networking fixes for 5.11-rc1.
Current release - always broken: - net/smc: fix access to parent of an ib device - devlink: use _BITUL() macro instead of BIT() in the UAPI header - handful of mptcp fixes Previous release - regressions: - intel: AF_XDP: clear the status bits for the next_to_use descriptor - dpaa2-eth: fix the size of the mapped SGT buffer Previous release - always broken: - mptcp: fix security context on server socket - ethtool: fix string set id check - ethtool: fix error paths in ethnl_set_channels() - lan743x: fix rx_napi_poll/interrupt ping-pong - qca: ar9331: fix sleeping function called from invalid context bug Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl/bxLMACgkQMUZtbf5S IrtTkRAAoxZFOsuXeTejJqUPlUwxCfAWb4HhND9k2xLNqi2H85b16v56Fy/R6AzK AKVHYFn0a0BetcicpjNZmV8bC7Xeu7YaEF8OmzBZ0TQ2OiCSHdMWFUOlo/2Q9ogN xc0q4umaq10SekUEeanOyHta5Y9YEVaiRk/y6Eue5FGo9jbCbgDXKoxBvFzwlNkr yuXFZOvY9CwlzKuBWFnpBNP6tizdG2q42JDif/v1nF0wLSEt7KkwKPOButusWbjd WdqeZ6vazg2z6/PLJ/GCgr8vGrF5Ublp8uccz0kfTW3Cmu2jZH8SxsdaUcL2WRiR rqnu0sYe6grQCF78lUZIpJp5K5TMpXI5UtjN2Kwv1J/yo8rSXMFqTNgdWNLxUkTF VzhoufTrjQIR1ERAzEWUdz2JA2VyIoJ5YrqHFPwJworlpKDKWHVjn4rMmsxValoN G+F3BzEBUlPbsV8IQa0uD9tW2qxtZ1g51uueKNkX9s5m/7mXdRoIFD6JWqoY4vg6 8oWhc3xpGry3u+pOSOWHMM1FVDpgiclF6ybuERcTHFcn821RdiLtfIaRKQQG72z2 oYoadbbwrR3CnYmYY0l/7LExYSuW0kaPPiuAPKRZiPb1vK3qv0X50GXylyFYdSfT JPytadfHz5xo9bVE8x1sDCTkwNGPdWs+w6fyHyHNGp2EZVSJyno= =nTjM -----END PGP SIGNATURE----- Merge tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - always broken: - net/smc: fix access to parent of an ib device - devlink: use _BITUL() macro instead of BIT() in the UAPI header - handful of mptcp fixes Previous release - regressions: - intel: AF_XDP: clear the status bits for the next_to_use descriptor - dpaa2-eth: fix the size of the mapped SGT buffer Previous release - always broken: - mptcp: fix security context on server socket - ethtool: fix string set id check - ethtool: fix error paths in ethnl_set_channels() - lan743x: fix rx_napi_poll/interrupt ping-pong - qca: ar9331: fix sleeping function called from invalid context bug" * tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits) net/sched: sch_taprio: reset child qdiscs before freeing them nfp: move indirect block cleanup to flower app stop callback octeontx2-af: Fix undetected unmap PF error check net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments" qlcnic: Fix error code in probe mptcp: fix pending data accounting mptcp: push pending frames when subflow has free space mptcp: properly annotate nested lock mptcp: fix security context on server socket net/mlx5: Fix compilation warning for 32-bit platform mptcp: clear use_ack and use_map when dropping other suboptions devlink: use _BITUL() macro instead of BIT() in the UAPI header net: korina: fix return value net/smc: fix access to parent of an ib device ethtool: fix error paths in ethnl_set_channels() nfc: s3fwrn5: Remove unused NCI prop commands nfc: s3fwrn5: Remove the delay for NFC sleep phy: fix kdoc warning tipc: do sanity check payload of a netlink message use __netdev_notify_peers in hyperv ... |
||
|
Linus Torvalds
|
6daa90439e |
dmaengine updates for v5.11-rc1
New drivers/devices - Qualcomm ADM driver - Qualcomm GPI driver - Allwinner A100 DMA support - Microchip Sama7g5 support - Mediatek MT8516 apdma - Updates: - more updates to idxd driver and support for IAX config - runtime PM support for dw driver - TI keystone drivers for 5.11 included here due to dependency for TI drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl/bkxEACgkQfBQHDyUj g0dxNA//WzpVy9QJnj6OgXIjM+9sBjqls0iPVfy1JeeMmVW8cgCwLyBNZcssKRye mJ9+VnTx4JQBj4KD2cFBdpr46GvBFbSbcWNSCdm179NtHI4G6tjtynOcWaI9Clu2 0KHoa/EHIj8/jD3Hsbm+WZ1zCoY4VKBXsEq6x1Sj2tpp0/ocDhH4XLAsWTHE9OAD sc+0OtHr1wU4EdV6TKNTT0jXsdtzxOPPsvRsoaKncnR+Mkrgv0FvMBfBLhOb3a+m wUHEkwrEP1pT4Xcew6ZkYs4RYwJI3pllu2gUTs5qtidc723ol/C4kJ27q55N4azb j5buA8AhEwqIDH8qNuV07qaIu2VTdTdbYid3xgAeFygwM1npecZvOf8k6rTjxR/6 XN8jaDuhc2uISY7Gt5c6tOe8rG3ffNhYrmEuGD5HI0hcglpALiE4NcgalaaQS9J1 suQ6AUtCslReD+6M/lfarn9Zd3UAKGbxU8vCNPq0EcSAGUz9u9VK2VwKiGnAZ8bb ED3QDUzZYjTDWpiVodsuJlONgaMLsRCQecZWMDRNpzmf1rCXnkY0eDGiSMz+IiXZ 87IdD66u3d/Mkm6jVdwp6+tKZ/ohj+dtIWKhMd8cKXv5zTzS+4IokxpkxdjBsHPx z+G73IMHjQo8xl/P0IhhwZw+7cBrkntLq8lRSbYxjSTP09QerNE= =uNBn -----END PGP SIGNATURE----- Merge tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "The last dmaengine updates for this year :) This contains couple of new drivers, new device support and updates to bunch of drivers. New drivers/devices: - Qualcomm ADM driver - Qualcomm GPI driver - Allwinner A100 DMA support - Microchip Sama7g5 support - Mediatek MT8516 apdma Updates: - more updates to idxd driver and support for IAX config - runtime PM support for dw driver - TI drivers" * tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits) soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA dmaengine: ti: k3-udma: Initial support for K3 PKTDMA dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling dmaengine: ti: k3-udma: Initial support for K3 BCDMA soc: ti: k3-ringacc: add AM64 DMA rings support. dmaengine: ti: Add support for k3 event routers dmaengine: ti: k3-psil: Add initial map for AM64 dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 BCDMA dmaengine: dmatest: Use dmaengine_get_dma_device dmaengine: doc: client: Update for dmaengine_get_dma_device() usage dmaengine: Add support for per channel coherency handling dmaengine: of-dma: Add support for optional router configuration callback dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API dmaengine: ti: k3-udma: Add support for second resource range from sysfw dmaengine: ti: k3-udma: Wait for peer teardown completion if supported ... |
||
|
Linus Torvalds
|
65de0b89d7 |
fuse update for 5.11
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCX9tWUAAKCRDh3BK/laaZ PJ8CAP9RJLCxeG3388P9eLIWGXGrvtq3BIpxrZt57YsCQw5aXgEAmrL53WxDeLgG sDV2J9IQ8gFKkkG1hjXyJj+Tw/yPmQE= =zxR9 -----END PGP SIGNATURE----- Merge tag 'fuse-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Improve performance of virtio-fs in mixed read/write workloads - Try to revalidate cache before returning EEXIST on exclusive create - Add a couple of miscellaneous bug fixes as well as some code cleanups * tag 'fuse-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix bad inode fuse: support SB_NOSEC flag to improve write performance fuse: add a flag FUSE_OPEN_KILL_SUIDGID for open() request fuse: don't send ATTR_MODE to kill suid/sgid for handle_killpriv_v2 fuse: setattr should set FATTR_KILL_SUIDGID fuse: set FUSE_WRITE_KILL_SUIDGID in cached write path fuse: rename FUSE_WRITE_KILL_PRIV to FUSE_WRITE_KILL_SUIDGID fuse: introduce the notion of FUSE_HANDLE_KILLPRIV_V2 fuse: always revalidate if exclusive create virtiofs: clean up error handling in virtio_fs_get_tree() fuse: add fuse_sb_destroy() helper fuse: simplify get_fuse_conn*() fuse: get rid of fuse_mount refcount virtiofs: simplify sb setup virtiofs fix leak in setup fuse: launder page should wait for page writeback |
||
|
Linus Torvalds
|
ff49c86f27 |
f2fs-for-5.11-rc1
In this round, we've made more work into per-file compression support. For example, F2FS_IOC_GET|SET_COMPRESS_OPTION provides a way to change the algorithm or cluster size per file. F2FS_IOC_COMPRESS|DECOMPRESS_FILE provides a way to compress and decompress the existing normal files manually along with a new mount option, compress_mode=fs|user, which can control who compresses the data. Chao also added a checksum feature with a mount option so that we are able to detect any corrupted cluster. In addition, Daniel contributed casefolding with encryption patch, which will be used for Android devices. Enhancement: - add ioctls and mount option to manage per-file compression feature - support casefolding with encryption - support checksum for compressed cluster - avoid IO starvation by replacing mutex with rwsem - add sysfs, max_io_bytes, to control max bio size Bug fix: - fix use-after-free issue when compression and fsverity are enabled - fix consistency corruption during fault injection test - fix data offset for lseek - get rid of buffer_head which has 32bits limit in fiemap - fix some bugs in multi-partitions support - fix nat entry count calculation in shrinker - fix some stat information And, we've refactored some logics and fix minor bugs as well. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl/a8ywACgkQQBSofoJI UNLa2RAAjK+6tOs+NuYx2w9SegghKxwCg4Mb362BMdaAGx6GzMqAkCiVdujuoz/r +wy8sdqO9QE7723ZDNsebNMLRnkNPHnpneSL2p6OsSLJrD3ORTELVRrzNlkemvnK rRHZyYnNJvQQnD4uU7ABvROKsIDw/nCfcFvzHmLIgEw8EHO0W4n6fTtBdTwXv1qi N3qXhGuQldonR9XICuGjzj7wh17n9ua6Mr12XX3Ok38giMcZb9KFBwgvlhl35cxt htEmUpxWD3NTSw6zJmV4VAiajpiIkW6QRQuVA1nzdLZK644gaJMhM1EUsOnZhfDl wX0ZtKoNkXxb0glD34O3aYqeHJ3tHWgPmmpVm9TECJP9A/X7kmEHgQYpH/eJ9I7d tk51Uz28Mz1RShXU4i5RyKZeeoNTLiVlqiC95E2cnq4C1tLOJyI00N9AinrLzvR+ fqUrAwCrBpiYX63mWKYwq7GWxWwp4+PY09kyIZxxJiWhTE/St0bRx2bQL8zA8C6J Rtxl+QWyQhkFbNu8fAukLFAhC6mqX/FKpXvUqRehBnHRvMWBiVZG0//eOPQLk71u qsdCgYuEVcg3itDQrZvmsjxi4Pb5E9mNr0s5oC4I2WvBPMheD4esSyG7cKDN0qfS 3FFHlRYLOvnjPMLnKTmZXjFvFyHR8mwsD4Z83MeSrqYnWC14tFY= =KneU -----END PGP SIGNATURE----- Merge tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've made more work into per-file compression support. For example, F2FS_IOC_GET | SET_COMPRESS_OPTION provides a way to change the algorithm or cluster size per file. F2FS_IOC_COMPRESS | DECOMPRESS_FILE provides a way to compress and decompress the existing normal files manually. There is also a new mount option, compress_mode=fs|user, which can control who compresses the data. Chao also added a checksum feature with a mount option so that we are able to detect any corrupted cluster. In addition, Daniel contributed casefolding with encryption patch, which will be used for Android devices. Summary: Enhancements: - add ioctls and mount option to manage per-file compression feature - support casefolding with encryption - support checksum for compressed cluster - avoid IO starvation by replacing mutex with rwsem - add sysfs, max_io_bytes, to control max bio size Bug fixes: - fix use-after-free issue when compression and fsverity are enabled - fix consistency corruption during fault injection test - fix data offset for lseek - get rid of buffer_head which has 32bits limit in fiemap - fix some bugs in multi-partitions support - fix nat entry count calculation in shrinker - fix some stat information And, we've refactored some logics and fix minor bugs as well" * tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits) f2fs: compress: fix compression chksum f2fs: fix shift-out-of-bounds in sanity_check_raw_super() f2fs: fix race of pending_pages in decompression f2fs: fix to account inline xattr correctly during recovery f2fs: inline: fix wrong inline inode stat f2fs: inline: correct comment in f2fs_recover_inline_data f2fs: don't check PAGE_SIZE again in sanity_check_raw_super() f2fs: convert to F2FS_*_INO macro f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size f2fs: don't allow any writes on readonly mount f2fs: avoid race condition for shrinker count f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE f2fs: add compress_mode mount option f2fs: Remove unnecessary unlikely() f2fs: init dirty_secmap incorrectly f2fs: remove buffer_head which has 32bits limit f2fs: fix wrong block count instead of bytes f2fs: use new conversion functions between blks and bytes f2fs: rename logical_to_blk and blk_to_logical f2fs: fix kbytes written stat for multi-device case ... |
||
Tobias Klauser
|
75f4d4544d |
devlink: use _BITUL() macro instead of BIT() in the UAPI header
The BIT() macro is not available for the UAPI headers. Moreover, it can
be defined differently in user space headers. Thus, replace its usage
with the _BITUL() macro which is already used in other macro definitions
in <linux/devlink.h>.
Fixes:
|
||
|
Linus Torvalds
|
0c71cc04eb |
VFIO updates for v5.11-rc1
- Fix uninitialized list walk in error path (Eric Auger) - Use io_remap_pfn_range() (Jason Gunthorpe) - Allow fallback support for NVLink on POWER8 (Alexey Kardashevskiy) - Enable mdev request interrupt with CCW support (Eric Farman) - Enable interface to iommu_domain from vfio_group (Lu Baolu) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iQIcBAABAgAGBQJf2mBlAAoJECObm247sIsi4Y0P/2+beHwcZfSn5HSSSeqFR+uj HfiZYN05bFcVirHPIPfY56kbe8+XNqwHAUPqch+c2iuGhLHuUIXkHwFq8VqvBDY4 xVqu9ZB23e881dF7NPzMAcK2UMDDwtlmeaf+7oRADVmTn58hErU9qt813i7a+x1S 5p8UpCTf+X+sh434cV882/TIV4hWgaFgn1/Gy3l8GDaJUW1lQb3MHZ5XY+o9KOxt 4R7VLIYZCDwEcByUsz8p4RLD036YpSS2Ir+CHXqeArtKrwRjjM62cSwDCOuM6ewZ GJ7O3YzPp9FQ75F3oorL3D+ojPY6AU1QjZKg0+gAQS3kucewwkv+vI+RDhSc8Xx7 PFTW2bLk4cu9LHQxUT64uH5Qoa0NtfPBUGvgsR4kXPCRClk71ZcGZgaQD3CWJBhE CTPI1OLHeJgp7MGXAArGRzFOtf0nux5oxOmcmT5fg4icG+x7BgcvDd7dVhyGAjn7 Gp87OOtJ3itDhWIlO1aTJVHEt42b1eezLkkyIKHfPlDLJmyHEfCOTjDLftr7Rmma 2IlyDJs83MCahQFcjqbPJWqh2Ttda8+ItutiklwBJRHe6EC+4WML6JaHgXe71CDi 9Y9HwKLxYFr1pwUpQP6bxzEDlTCPasWyhBmOAUnRtZdU/daX+KGp4WqSFBYkPIgy ERmTCiJGJ3p41V08qOki =W/GT -----END PGP SIGNATURE----- Merge tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfio Pull VFIO updates from Alex Williamson: - Fix uninitialized list walk in error path (Eric Auger) - Use io_remap_pfn_range() (Jason Gunthorpe) - Allow fallback support for NVLink on POWER8 (Alexey Kardashevskiy) - Enable mdev request interrupt with CCW support (Eric Farman) - Enable interface to iommu_domain from vfio_group (Lu Baolu) * tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfio: vfio/type1: Add vfio_group_iommu_domain() vfio-ccw: Wire in the request callback vfio-mdev: Wire in a request handler for mdev parent vfio/pci/nvlink2: Do not attempt NPU2 setup on POWER8NVL NPU vfio-pci: Use io_remap_pfn_range() for PCI IO memory vfio/pci: Move dummy_resources_list init in vfio_pci_probe() |
||
|
Linus Torvalds
|
de925e2fbb |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina: - AMD SFH (Sensor Fusion Hub) support (Sandeep Singh) - increase of maximum HID report size to 16KB in order to support some of the modern devices (Dean Camera) - control interface support for hidraw (Dean Camera) - Sony DS4 power and firmware reporting fixes (Roderick Colenbrander) - support for ghlive PS3/WII U dongles (Pascal Giard) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits) HID: i2c-hid: add Vero K147 to descriptor override HID: ite: Add support for Acer S1002 keyboard-dock HID: sony: support for ghlive ps3/wii u dongles HID: hidraw: Add additional hidraw input/output report ioctls. HID: Increase HID maximum report size to 16KB HID: elecom: drop stray comment HID: mf: add support for 0079:1846 Mayflash/Dragonrise USB Gamecube Adapter HID: elecom: add support for EX-G M-XGL20DLBK wireless mouse HID: elecom: rewrite report based on model specific parameters HID: wacom: Constify attribute_groups HID: input: Fix fall-through warnings for Clang HID: usbhid: Fix fall-through warnings for Clang HID: logitech-hidpp: Add hid_device_id for V470 bluetooth mouse HID: intel-ish-hid: Remove unnecessary assignment to variable rv HID: sony: Workaround for DS4 dongle hotplug kernel crash. HID: sony: Don't use fw_version/hw_version for sysfs cleanup. HID: sony: Report more accurate DS4 power status. SFH: fix error return check for -ERESTARTSYS HID: SFH: Add documentation HID: hid-input: occasionally report stylus battery even if not changed ... |
||
|
Linus Torvalds
|
009bd55dfc |
RDMA 5.11 pull request
A smaller set of patches, nothing stands out as being particularly major
this cycle:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw, cxgb4,
mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions
-----BEGIN PGP SIGNATURE-----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=9t8b
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller set of patches, nothing stands out as being particularly
major this cycle. The biggest item would be the new HIP09 HW support
from HNS, otherwise it was pretty quiet for new work here:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw,
cxgb4, mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits)
RDMA/cma: Don't overwrite sgid_attr after device is released
RDMA/mlx5: Fix MR cache memory leak
RDMA/rxe: Use acquire/release for memory ordering
RDMA/hns: Simplify AEQE process for different types of queue
RDMA/hns: Fix inaccurate prints
RDMA/hns: Fix incorrect symbol types
RDMA/hns: Clear redundant variable initialization
RDMA/hns: Fix coding style issues
RDMA/hns: Remove unnecessary access right set during INIT2INIT
RDMA/hns: WARN_ON if get a reserved sl from users
RDMA/hns: Avoid filling sl in high 3 bits of vlan_id
RDMA/hns: Do shift on traffic class when using RoCEv2
RDMA/hns: Normalization the judgment of some features
RDMA/hns: Limit the length of data copied between kernel and userspace
RDMA/mlx4: Remove bogus dev_base_lock usage
RDMA/uverbs: Fix incorrect variable type
RDMA/core: Do not indicate device ready when device enablement fails
RDMA/core: Clean up cq pool mechanism
RDMA/core: Update kernel documentation for ib_create_named_qp()
MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address
...
|
||
|
Linus Torvalds
|
60f7c503d9 |
SCSI misc on 20201216
This series consists of the usual driver updates (ufs, qla2xxx, smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major power management rework and a load of assorted minor updates. There are a few core updates (formatting fixes being the big one) but nothing major this cycle. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w hwhOv6Uto89gLCWSEz8= =KUPT -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major power management rework and a load of assorted minor updates. There are a few core updates (formatting fixes being the big one) but nothing major this cycle" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: mpt3sas: Update driver version to 36.100.00.00 scsi: mpt3sas: Handle trigger page after firmware update scsi: mpt3sas: Add persistent MPI trigger page scsi: mpt3sas: Add persistent SCSI sense trigger page scsi: mpt3sas: Add persistent Event trigger page scsi: mpt3sas: Add persistent Master trigger page scsi: mpt3sas: Add persistent trigger pages support scsi: mpt3sas: Sync time periodically between driver and firmware scsi: qla2xxx: Update version to 10.02.00.104-k scsi: qla2xxx: Fix device loss on 4G and older HBAs scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry scsi: qla2xxx: Fix the call trace for flush workqueue scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines scsi: qla2xxx: Handle aborts correctly for port undergoing deletion scsi: qla2xxx: Fix N2N and NVMe connect retry failure scsi: qla2xxx: Fix FW initialization error on big endian machines scsi: qla2xxx: Fix crash during driver load on big endian machines scsi: qla2xxx: Fix compilation issue in PPC systems scsi: qla2xxx: Don't check for fw_started while posting NVMe command scsi: qla2xxx: Tear down session if FW say it is down ... |
||
|
Linus Torvalds
|
48aba79bcf |
for-5.11/io_uring-2020-12-14
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/XeDUQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpnF9D/4+l1r1G5AcsSsgEvu1aCjP83LLWrHIAA5+
ca3OY6vwOjBvqI7oOoPcYJeYJ9uuGGQc31tDFJtP6Sl6Gk31AB4iSddyrowaX+t+
UJyJNfsgWKiLjY48EyQJ0gIqjuvPq8hPGMGClJb1A7+w87fqBC5UwCWEnJmE7MaX
401kIw0CRVWYTnDEOYxToss6D6gQ30E8UZjdJ0cG4g8xVQBY2kKwYR3F9tDlAwsY
CF+RCKpibcKwnaNZJBL67ClWjj1hC0ivg0O0G+W1UYysesKKdWFRI2rmxvH55K5T
7tHlfVuVPladNmlLVNZnCvyqBrFHyAZPmOsdv3xQOvJ7pZPaxKV9xIYryQKZW4H4
9tKkj3T1aop/fDGqIMxgymZsWW+1vvxAmM+7WkdOPHwHRSakJ5wGIj6Ekpton+5y
aixJUFq390o/o+S8PDO7mgzdvYrasv3iLl5UxnIcU3rq30wxnRKit4vUZny8DlzF
gOTw7QSocximhGYci+Uz4d4/XdK2CHc6eZDkQDltgJXxIrdsrN0qKxMCEsMKgCR1
RMiDv+52MP6kp/wpXiOHQF25YRnUOW0qfEjWKK6Ye28DGuKPPuIXtN/BUD3rjdIc
IJX3lDfOI3PgXNX24nOarucrF+ootyRmE6tGTVZhCVBhUXGR+MGatGfkeCqnmNzZ
gny2+UrGIQ==
=ly9V
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Fairly light set of changes this time around, and mostly some bits
that were pushed out to 5.11 instead of 5.10, fixes/cleanups, and a
few features. In particular:
- Cleanups around iovec import (David Laight, Pavel)
- Add timeout support for io_uring_enter(2), which enables us to
clean up liburing and avoid a timeout sqe submission in the
completion path.
The big win here is that it allows setups that split SQ and CQ
handling into separate threads to avoid locking, as the CQ side
will no longer submit when timeouts are needed when waiting for
events (Hao Xu)
- Add support for socket shutdown, and renameat/unlinkat.
- SQPOLL cleanups and improvements (Xiaoguang Wang)
- Allow SQPOLL setups for CAP_SYS_NICE, and enable regular
(non-fixed) files to be used.
- Cancelation improvements (Pavel)
- Fixed file reference improvements (Pavel)
- IOPOLL related race fixes (Pavel)
- Lots of other little fixes and cleanups (mostly Pavel)"
* tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-block: (43 commits)
io_uring: fix io_cqring_events()'s noflush
io_uring: fix racy IOPOLL flush overflow
io_uring: fix racy IOPOLL completions
io_uring: always let io_iopoll_complete() complete polled io
io_uring: add timeout update
io_uring: restructure io_timeout_cancel()
io_uring: fix files cancellation
io_uring: use bottom half safe lock for fixed file data
io_uring: fix miscounting ios_left
io_uring: change submit file state invariant
io_uring: check kthread stopped flag when sq thread is unparked
io_uring: share fixed_file_refs b/w multiple rsrcs
io_uring: replace inflight_wait with tctx->wait
io_uring: don't take fs for recvmsg/sendmsg
io_uring: only wake up sq thread while current task is in io worker context
io_uring: don't acquire uring_lock twice
io_uring: initialize 'timeout' properly in io_sq_thread()
io_uring: refactor io_sq_thread() handling
io_uring: always batch cancel in *cancel_files()
io_uring: pass files into kill timeouts/poll
...
|
||
Jiri Kosina
|
e77bc7dc9a |
Merge branch 'for-5.11/elecom' into for-linus
- support for EX-G M-XGL20DLBK device, from YOSHIOKA Takuma |
||
|
Linus Torvalds
|
e2dc495734 |
asm-generic cleanups for v5.11
These are a couple of compiler warning fixes to make 'make W=2' less noisy, as well as some fixes to code comments in asm-generic. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y10UACgkQmmx57+YA GNmJ8A/6A5iIFTJu48fEb4aVDXkW3WLsgRJ+pPt+sFqNhLJu6yi+HftNPhvfaXuJ 1/S2uqAc2VA8WbHn+KTqPk5SsBh5urI6c4DXxTDHihMT6lIqjRbhKIoIaFx7Vl8d 1CERQTqgJMmGNjrZkOnD3qsud9tbUh/dJZl3UuDYmYmgPw/p+y79mGIwAzvHYsU9 QdazdV6v22ceagp2QSLYTr7LN6pShijyXqcJ4ko9Zhzpj1TNsBF97nKIww/vMm3k XRLBDbPfTcGrUtQmDQ+lVWPNpFbiR2iZuC/CBy4e0MbpQP5l9zoVG7d60Imvi/17 9+vWmvng9ehFiyM5fRYG67L+cKVbPhVMW1TmUpxg88KvznudHKgV0jwXRZV2EO10 /RpVQIJ0rLODx2myEZd8Rqhv2UVmjJmViPq7Hr/D8C+JcwdtfcPnziQteBOB0piz QI1h0me+0Yj90nLpjWBGCwUnFh+8/SAoKkwViCxA+Jmn6/34hh0/5w9ExoI+4Frr 8KlHu5wZ6O0mqWT0INrbeb0nmktFOL9tGwTrHa8Z723osB1nuVtTAvHxWCOSlVDd XkuViDLkcJn4B+7EcUoR1YY9wCwK5eHcvA/h/44Y7xU5k4OEJP5hFhXy4ew2CCbE OpazsuCABkpno/WbLoJSdEA+2Dv/uiN5ChNjACgWBN2M4LlKBGs= =c2xf -----END PGP SIGNATURE----- Merge tag 'asm-generic-cleanup-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "These are a couple of compiler warning fixes to make 'make W=2' less noisy, as well as some fixes to code comments in asm-generic" * tag 'asm-generic-cleanup-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: syscalls: Fix file comments for syscalls implemented in kernel/sys.c ctype.h: remove duplicate isdigit() helper qspinlock: use signed temporaries for cmpxchg asm-generic: fix ffs -Wshadow warning asm-generic: percpu: avoid Wshadow warning asm-generic/sembuf: Update architecture related information in comment |
||
|
Linus Torvalds
|
345d4ab5e0 |
close-range-openat2-v5.11
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCX9dpfgAKCRCRxhvAZXjc oo5kAP9PrqQAfEe9+CNlnOb4ZawcZaa3osUkr/ZkfoxI/dO2awEAgGCgWQ5PLtQF gtfz6I5IT2sc3G4D+nGZxef6Q29J2Qc= =fZNu -----END PGP SIGNATURE----- Merge tag 'close-range-openat2-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull close_range/openat2 updates from Christian Brauner: "This contains a fix for openat2() to make RESOLVE_BENEATH and RESOLVE_IN_ROOT mutually exclusive. It doesn't make sense to specify both at the same time. The openat2() selftests have been extended to verify that these two flags can't be specified together. This also adds the CLOSE_RANGE_CLOEXEC flag to close_range() which allows to mark a range of file descriptors as close-on-exec without actually closing them. This is useful in general but the use-case that triggered the patch is installing a seccomp profile in the calling task before exec. If the seccomp profile wants to block the close_range() syscall it obviously can't use it to close all fds before exec. If it calls close_range() before installing the seccomp profile it needs to take care not to close fds that it will still need before the exec meaning it would have to call close_range() multiple times on different ranges and then still fall back to closing fds one by one right before the exec. CLOSE_RANGE_CLOEXEC allows to solve this problem relying on the exec codepath to get rid of the unwanted fds. The close_range() tests have been expanded to verify that CLOSE_RANGE_CLOEXEC works" * tag 'close-range-openat2-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests: core: add tests for CLOSE_RANGE_CLOEXEC fs, close_range: add flag CLOSE_RANGE_CLOEXEC selftests: openat2: add RESOLVE_ conflict test openat2: reject RESOLVE_BENEATH|RESOLVE_IN_ROOT |
||
|
Linus Torvalds
|
f1ee3b8829 |
for-5.11-tag
-----BEGIN PGP SIGNATURE-----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=5YAS
-----END PGP SIGNATURE-----
Merge tag 'for-5.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"We have a mix of all kinds of changes, feature updates, core stuff,
performance improvements and lots of cleanups and preparatory changes.
User visible:
- export filesystem generation in sysfs
- new features for mount option 'rescue':
- what's currently supported is exported in sysfs
- 'ignorebadroots'/'ibadroots' - continue even if some essential
tree roots are not usable (extent, uuid, data reloc, device,
csum, free space)
- 'ignoredatacsums'/'idatacsums' - skip checksum verification on
data
- 'all' - now enables 'ignorebadroots' + 'ignoredatacsums' +
'nologreplay'
- export read mirror policy settings to sysfs, new policies will be
added in the future
- remove inode number cache feature (mount -o inode_cache), obsoleted
in 5.9
User visible fixes:
- async discard scheduling fixes on high loads
- update inode byte counter atomically so stat() does not report
wrong value in some cases
- free space tree fixes:
- correctly report status of v2 after remount
- clear v1 cache inodes when v2 is newly enabled after remount
Core:
- switch own tree lock implementation to standard rw semaphore:
- one-level lock nesting is not required anymore, the last use of
this was in free space that's now loaded asynchronously
- own implementation of adaptive spinning before taking mutex has
been part of rwsem
- performance seems to be better in general, much better (+tens
of percents) for some workloads
- lockdep does not complain
- finish direct IO conversion to iomap infrastructure, remove
temporary workaround for DSYNC after iomap API updates
- preparatory work to support data and metadata blocks smaller than
page:
- generalize code that assumes sectorsize == PAGE_SIZE, lots of
refactoring
- planned namely for 64K pages (eg. arm64, ppc64)
- scrub read-only support
- preparatory work for zoned allocation mode (SMR/ZBC/ZNS friendly):
- disable incompatible features
- round-robin superblock write
- free space cache (v1) is loaded asynchronously, remove tree path
recursion
- slightly improved time tacking for transaction kthread wake ups
Performance improvements (note that the numbers depend on load type or
other features and weren't run on the same machine):
- skip unnecessary work:
- do not start readahead for csum tree when scrubbing non-data
block groups
- do not start and wait for delalloc on snapshot roots on
transaction commit
- fix race when defragmenting leads to unnecessary IO
- dbench speedups (+throughput%/-max latency%):
- skip unnecessary searches for xattrs when logging an inode
(+10.8/-8.2)
- stop incrementing log batch when joining log transaction (1-2)
- unlock path before checking if extent is shared during nocow
writeback (+5.0/-20.5), on fio load +9.7% throughput/-9.8%
runtime
- several tree log improvements, eg. removing unnecessary
operations, fixing races that lead to additional work
(+12.7/-8.2)
- tree-checker error branches annotated with unlikely() (+3%
throughput)
Other:
- cleanups
- lockdep fixes
- more btrfs_inode conversions
- error variable cleanups"
* tag 'for-5.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (198 commits)
btrfs: scrub: allow scrub to work with subpage sectorsize
btrfs: scrub: support subpage data scrub
btrfs: scrub: support subpage tree block scrub
btrfs: scrub: always allocate one full page for one sector for RAID56
btrfs: scrub: reduce width of extent_len/stripe_len from 64 to 32 bits
btrfs: refactor btrfs_lookup_bio_sums to handle out-of-order bvecs
btrfs: remove btrfs_find_ordered_sum call from btrfs_lookup_bio_sums
btrfs: handle sectorsize < PAGE_SIZE case for extent buffer accessors
btrfs: update num_extent_pages to support subpage sized extent buffer
btrfs: don't allow tree block to cross page boundary for subpage support
btrfs: calculate inline extent buffer page size based on page size
btrfs: factor out btree page submission code to a helper
btrfs: make btrfs_verify_data_csum follow sector size
btrfs: pass bio_offset to check_data_csum() directly
btrfs: rename bio_offset of extent_submit_bio_start_t to dio_file_offset
btrfs: fix lockdep warning when creating free space tree
btrfs: skip space_cache v1 setup when not using it
btrfs: remove free space items when disabling space cache v1
btrfs: warn when remount will not change the free space tree
btrfs: use superblock state to print space_cache mount option
...
|
||
|
Linus Torvalds
|
e87b070839 |
rpmsg updates for v5.11
This extracts the "nameserver" previoiusly used only by the virtio rpmsg
transport to work ontop of any rpmsg implementation and clarifies the
endianness of the data types used in rpmsg.
-----BEGIN PGP SIGNATURE-----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=yGKj
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This extracts the 'nameserver' previously used only by the virtio
rpmsg transport to work ontop of any rpmsg implementation and
clarifies the endianness of the data types used in rpmsg"
* tag 'rpmsg-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: Turn name service into a stand alone driver
rpmsg: Make rpmsg_{register|unregister}_device() public
rpmsg: virtio: Add rpmsg channel device ops
rpmsg: core: Add channel creation internal API
rpmsg: virtio: Rename rpmsg_create_channel
rpmsg: Move structure rpmsg_ns_msg to header file
rpmsg: virtio: Move from virtio to rpmsg byte conversion
rpmsg: Introduce __rpmsg{16|32|64} types
|
||
|
Linus Torvalds
|
489e9fea66 |
pci-v5.11-changes
-----BEGIN PGP SIGNATURE-----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=xRTv
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Decode PCIe 64 GT/s link speed (Gustavo Pimentel)
- Remove unused HAVE_PCI_SET_MWI (Heiner Kallweit)
- Reduce pci_set_cacheline_size() message to debug level (Heiner
Kallweit)
- Fix pci_slot_release() NULL pointer dereference (Jubin Zhong)
- Unify ECAM constants in native PCI Express drivers (Krzysztof
Wilczyński)
- Return u8 from pci_find_capability() and similar (Puranjay Mohan)
- Return u16 from pci_find_ext_capability() and similar (Bjorn
Helgaas)
- Fix ACPI companion lookup for device 0 on the root bus (Rafael J.
Wysocki)
Resource management:
- Keep both device and resource name for config space remaps
(Alexander Lobakin)
- Bounds-check command-line resource alignment requests (Bjorn
Helgaas)
- Fix overflow in command-line resource alignment requests (Colin Ian
King)
Driver binding:
- Avoid duplicate IDs in driver dynamic IDs list (Zhenzhong Duan)
Power management:
- Save/restore Precision Time Measurement Capability for
suspend/resume (David E. Box)
- Disable PTM during suspend to save power (David E. Box)
- Add sysfs attribute for device power state (Maximilian Luz)
- Rename pci_wakeup_bus() to pci_resume_bus() (Mika Westerberg)
- Do not generate wakeup event when runtime resuming device (Mika
Westerberg)
- Save/restore ASPM L1SS Capability for suspend/resume (Vidya Sagar)
Virtualization:
- Mark AMD Raven iGPU ATS as broken in some platforms (Alex Deucher)
- Add function 1 DMA alias quirk for Marvell 9215 SATA controller
(Bjorn Helgaas)
MSI:
- Disable MSI for Pericom PCIe-USB adapter (Andy Shevchenko)
- Improve warnings for 32-bit-limited MSI support (Vidya Sagar)
Error handling:
- Cache RCEC EA Capability offset in pci_init_capabilities() (Sean V
Kelley)
- Rename reset_link() to reset_subordinates() (Sean V Kelley)
- Write AER Capability only when we control it (Sean V Kelley)
- Clear AER status only when we control AER (Sean V Kelley)
- Bind RCEC devices to the Root Port driver (Qiuxu Zhuo)
- Recover from RCiEP AER errors (Qiuxu Zhuo)
- Recover from RCEC AER errors (Sean V Kelley)
- Add pcie_link_rcec() to associate RCiEPs (Sean V Kelley)
- Add pcie_walk_rcec() to RCEC AER handling (Sean V Kelley)
- Add pcie_walk_rcec() to RCEC PME handling (Sean V Kelley)
- Add RCEC AER error injection support (Qiuxu Zhuo)
Broadcom iProc PCIe controller driver:
- Fix out-of-bound array accesses (Bharat Gooty)
- Invalidate correct PAXB inbound windows (Roman Bacik)
- Enhance PCIe Link information display (Srinath Mannam)
Cadence PCIe controller driver:
- Make "cdns,max-outbound-regions" property optional (Kishon Vijay
Abraham I)
Intel VMD host bridge driver:
- Offset client MSI-X vectors (Jon Derrick)
- Update type of __iomem pointers (Krzysztof Wilczyński)
NVIDIA Tegra PCIe controller driver:
- Move "dbi" accesses to post common DWC initialization (Vidya Sagar)
- Read "dbi" base address to program in application logic (Vidya
Sagar)
- Fix ASPM-L1SS advertisement disable code (Vidya Sagar)
- Set DesignWare IP version (Vidya Sagar)
- Continue unconfig sequence even if parts fail (Vidya Sagar)
- Check return value of tegra_pcie_init_controller() (Vidya Sagar)
- Disable LTSSM during L2 entry (Vidya Sagar)
Qualcomm PCIe controller driver:
- Document PCIe bindings for SM8250 SoC (Manivannan Sadhasivam)
- Add SM8250 SoC support (Manivannan Sadhasivam)
- Add support for configuring BDF to SID mapping for SM8250
(Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- rcar: Drop unused members from struct rcar_pcie_host (Lad
Prabhakar)
- PCI: rcar-pci-host: Document r8a774e1 bindings (Lad Prabhakar)
- PCI: rcar-pci-host: Convert bindings to json-schema (Yoshihiro
Shimoda)
- PCI: rcar-pci-host: Document r8a77965 bindings (Yoshihiro Shimoda)
Samsung Exynos PCIe controller driver:
- Rework driver to support Exynos5433 PCIe PHY (Jaehoon Chung)
- Rework driver to support Exynos5433 variant (Jaehoon Chung)
- Drop samsung,exynos5440-pcie binding (Marek Szyprowski)
- Add the samsung,exynos-pcie binding (Marek Szyprowski)
- Add the samsung,exynos-pcie-phy binding (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Support multiple ATU memory regions (Rob Herring)
- Move intel-gw ATU offset out of driver match data (Rob Herring)
- Move "dbi", "dbi2", and "addr_space" resource setup into common
code (Rob Herring)
- Remove intel-gw unneeded function wrappers (Rob Herring)
- Ensure all outbound ATU windows are reset (Rob Herring)
- Use the common MSI irq_chip in dra7xx (Rob Herring)
- Drop the .set_num_vectors() host op (Rob Herring)
- Move MSI interrupt setup into DWC common code (Rob Herring)
- Rework MSI initialization (Rob Herring)
- Move link handling into common code (Rob Herring)
- Move dw_pcie_msi_init() into core (Rob Herring)
- Move dw_pcie_setup_rc() to DWC common code (Rob Herring)
- Remove unnecessary wrappers around dw_pcie_host_init() (Rob
Herring)
- Drop keystone duplicated 'num-viewport'" (Rob Herring)
- Move inbound and outbound windows to common struct (Rob Herring)
- Detect number of iATU windows (Rob Herring)
- Warn if non-prefetchable memory aperture size is > 32-bit (Vidya
Sagar)
- Add support to program ATU for >4GB memory (Vidya Sagar)
- Set 32-bit DMA mask for MSI target address allocation (Vidya Sagar)
TI J721E PCIe driver:
- Fix "ti,syscon-pcie-ctrl" to take argument (Kishon Vijay Abraham I)
- Add host mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham
I)
- Add EP mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I)
- Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg
(Kishon Vijay Abraham I)
TI Keystone PCIe controller driver:
- Enable compile-testing on !ARM (Alex Dewar)"
* tag 'pci-v5.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller
PCI/ACPI: Fix companion lookup for device 0 on the root bus
PCI: Keep both device and resource name for config space remaps
PCI: xgene: Removed unused ".bus_shift" initialisers from pci-xgene.c
PCI: vmd: Update type of the __iomem pointers
PCI: iproc: Convert to use the new ECAM constants
PCI: thunder-pem: Add constant for custom ".bus_shift" initialiser
PCI: Unify ECAM constants in native PCI Express drivers
PCI: Disable PTM during suspend to save power
PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume
PCI: Mark AMD Raven iGPU ATS as broken in some platforms
PCI: j721e: Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg
dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC
dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC
dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument
PCI: dwc: Set 32-bit DMA mask for MSI target address allocation
PCI: qcom: Add support for configuring BDF to SID mapping for SM8250
PCI: Reduce pci_set_cacheline_size() message to debug level
PCI: Remove unused HAVE_PCI_SET_MWI
PCI: qcom: Add SM8250 SoC support
...
|
||
|
Linus Torvalds
|
61f914256c |
platform-drivers-x86 for v5.11-1
Highlights:
- New driver for changing BIOS settings from within Linux on Dell devices,
this introduces a new generic sysfs API for this. Lenovo is working on
also supporting this API on their devices
- New Intel PMT telemetry and crashlog drivers
- Support for SW_TABLET_MODE reporting for the acer-wmi and intel-hid drivers
- Preparation work for improving support for Microsoft Surface hardware
- Various fixes / improvements / quirks for the panasonic-laptop and others
The following is an automated git shortlog grouped by driver:
ISST:
- Mark mmio_range_devid_0 and mmio_range_devid_1 with static keyword
- Change PCI device macros
- Allow configurable offset range
- Check for unaligned mmio address
Intel PMT Crashlog capability driver:
- Intel PMT Crashlog capability driver
Intel PMT Telemetry capability driver:
- Intel PMT Telemetry capability driver
Intel PMT class driver:
- Intel PMT class driver
Introduce support for Systems Management Driver over WMI for Dell Systems:
- Introduce support for Systems Management Driver over WMI for Dell Systems
MAINTAINERS:
- new panasonic-laptop maintainer
- rectify DELL WMI SYSMAN DRIVERS section
Merge tag 'ib-mfd-x86-v5.11' into review-hans:
- Merge tag 'ib-mfd-x86-v5.11' into review-hans
PCI:
- Add defines for Designated Vendor-Specific Extended Capability
Revert "platform/x86:
- wmi: Destroy on cleanup rather than unregister"
acer-wireless:
- send an EV_SYN/SYN_REPORT between state changes
acer-wmi:
- Add ACER_CAP_KBD_DOCK quirk for the Aspire Switch 10E SW3-016
- add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE
- Add support for SW_TABLET_MODE on Switch devices
- Add ACER_CAP_SET_FUNCTION_MODE capability flag
- Add new force_caps module parameter
- Cleanup accelerometer device handling
- Cleanup ACER_CAP_FOO defines
- Drop no-op set_quirks call from find_quirks
amd-pmc:
- Add AMD platform support for S2Idle
asus-wmi:
- Add userspace notification for performance mode change
- Add support for SW_TABLET_MODE on UX360
dell-smbios-base:
- Fix error return code in dell_smbios_init
dell-wmi-sysman:
- work around for BIOS bug
- fix init_bios_attributes() error handling
docs:
- ABI: sysfs-class-firmware-attributes: solve some warnings
i2c-multi-instantiate:
- Use device_get_match_data() to get driver data
- Simplify with dev_err_probe()
- Drop redundant ACPI_PTR()
intel-hid:
- add Rocket Lake ACPI device ID
- Do not create SW_TABLET_MODE input-dev when a KIOX010A ACPI dev is present
- Add alternative method to enable switches
- Add support for SW_TABLET_MODE
- fix _DSM function index handling
intel-vbtn:
- Fix SW_TABLET_MODE always reporting 1 on some HP x360 models
- Allow switch events on Acer Switch Alpha 12
- Support for tablet mode on HP Pavilion 13 x360 PC
intel_pmc_core:
- Assign boolean values to a bool variable
mfd:
- Intel Platform Monitoring Technology support
mlx-platform:
- Fix item counter assignment for MSN2700/ComEx system
- Fix item counter assignment for MSN2700, MSN24xx systems
- remove an unused variable
- Remove PSU EEPROM from MSN274x platform configuration
- Remove PSU EEPROM from default platform configuration
panasonic-laptop:
- Add sysfs attributes for firmware brightness registers
- Add support for battery charging threshold (eco mode)
- Resolve hotkey double trigger bug
- Add write support to mute
- Fix sticky key init bug
- Fix naming of platform files for consistency with other modules
- Split MODULE_AUTHOR() by one author per macro call
- Replace ACPI prints with pr_*() macros
- Add support for optical driver power in Y and W series
platform:
- Add Surface platform directory
platform/mellanox:
- mlxbf-pmc: Add Mellanox BlueField PMC driver
platform/surface:
- gpe: Add support for 15" Intel version of Surface Laptop 3
- Add Driver to set up lid GPEs on MS Surface device
- Move Surface Pro 3 Button driver to platform/surface
- Move Surface 3 Power OpRegion driver to platform/surface
- Move Surface 3 Button driver to platform/surface
- Move Surface 3 WMI driver to platform/surface
platform/x86/dell-wmi-sysman:
- Make some symbols static
- Make wmi_sysman_kobj_sysfs_ops static
pmt:
- Fix a potential Oops on error in probe
remove unneeded break:
- remove unneeded break
thinkpad_acpi:
- remove trailing semicolon in macro definition
- Whitelist P15 firmware for dual fan control
- Add palm sensor support
- Send tablet mode switch at wakeup time
- Add BAT1 is primary battery quirk for Thinkpad Yoga 11e 4th gen
- Do not report SW_TABLET_MODE on Yoga 11e
- add P1 gen3 second fan support
tools/power/x86/intel-speed-select:
- Update version for v5.11
- Account for missing sysfs for die_id
- Read TRL from mailbox
toshiba_acpi:
- Fix the wrong variable assignment
touchscreen_dmi:
- Add info for the Irbis TW118 tablet
- Add info for the Predia Basic tablet
x86/platform:
- classmate-laptop: add WiFi media button
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAl/XTkEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9z5EAf7BzqZDyFBpsDd8+o0FsjCq1DEzw0R
lZdhZt65wSMqe0sndgfStPQG1yet8JgABgq8aCkBQLhj55hjiOUYHe5iXmylSRQn
iWhu2xI+qYb9rhPW3lYilGcWAIfC5jrEZHFLtpXKx/p5iwCJQRvI6sV8HwcwJjnQ
p3eyxIUEQieAtO90scqsOWZTKtT/no9UMTLbZwrO3Spv05WGopIMtkHPWYTd96pa
6SRBdhZj3mrHHc7mRe0u4Wx2dzeUwiPLfubt/kmRPoo1HWTGE2Ck4KPqN/nSY3R2
z882CMZjWpbwoc3OP2fK26uIHjTh45+yVH8DVZbaQW9BWIOdE87iADzuWA==
=Df8H
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- New driver for changing BIOS settings from within Linux on Dell
devices. This introduces a new generic sysfs API for this. Lenovo
is working on also supporting this API on their devices
- New Intel PMT telemetry and crashlog drivers
- Support for SW_TABLET_MODE reporting for the acer-wmi and intel-hid
drivers
- Preparation work for improving support for Microsoft Surface
hardware
- Various fixes / improvements / quirks for the panasonic-laptop and
others"
* tag 'platform-drivers-x86-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (81 commits)
platform/x86: ISST: Mark mmio_range_devid_0 and mmio_range_devid_1 with static keyword
platform/x86: intel-hid: add Rocket Lake ACPI device ID
x86/platform: classmate-laptop: add WiFi media button
platform/x86: mlx-platform: Fix item counter assignment for MSN2700/ComEx system
platform/x86: mlx-platform: Fix item counter assignment for MSN2700, MSN24xx systems
tools/power/x86/intel-speed-select: Update version for v5.11
tools/power/x86/intel-speed-select: Account for missing sysfs for die_id
tools/power/x86/intel-speed-select: Read TRL from mailbox
platform/x86: intel-hid: Do not create SW_TABLET_MODE input-dev when a KIOX010A ACPI dev is present
platform/x86: intel-hid: Add alternative method to enable switches
platform/x86: intel-hid: Add support for SW_TABLET_MODE
platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on some HP x360 models
platform/x86: ISST: Change PCI device macros
platform/x86: ISST: Allow configurable offset range
platform/x86: ISST: Check for unaligned mmio address
acer-wireless: send an EV_SYN/SYN_REPORT between state changes
platform/x86: dell-wmi-sysman: work around for BIOS bug
platform/x86: mlx-platform: remove an unused variable
platform/x86: thinkpad_acpi: remove trailing semicolon in macro definition
platform/x86: dell-smbios-base: Fix error return code in dell_smbios_init
...
|