Drop repeated words in multiple comments.
(be, use, the, See)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Steve French <sfrench@samba.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove the superfuous break, as there is a 'return' before it.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ 1145308
Some very old server may not support SetPathInfo to adjust the timestamps
of directories. For these servers, try to open the directory and use SetFileInfo.
Minor correction to patch included that was
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Tested-by: Kenneth D'souza <kdsouza@redhat.com>
If server returns ERRBaduid but does not reset transport connection,
we'll keep sending command with a non-valid UID for the server as long
as transport is healthy, without actually recovering. This have been
observed on the field.
This patch adds ERRBaduid handling so that we set CifsNeedReconnect.
map_and_check_smb_error() can be modified to extend use cases.
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Fix build warning by removing unused variable 'server':
fs/cifs/inode.c:1089:26: warning:
variable server set but not used [-Wunused-but-set-variable]
1089 | struct TCP_Server_Info *server;
| ^~~~~~
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
When mounting with Kerberos, users have been confused about the
default error returned in scenarios in which either keyutils is
not installed or the user did not properly acquire a krb5 ticket.
Log a warning message in the case that "ENOKEY" is returned
from the get_spnego_key upcall so that users can better understand
why mount failed in those two cases.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The log of UAF problem is listed below.
BUG: KASAN: use-after-free in jffs2_rmdir+0xa4/0x1cc [jffs2] at addr c1f165fc
Read of size 4 by task rm/8283
=============================================================================
BUG kmalloc-32 (Tainted: P B O ): kasan: bad access detected
-----------------------------------------------------------------------------
INFO: Allocated in 0xbbbbbbbb age=3054364 cpu=0 pid=0
0xb0bba6ef
jffs2_write_dirent+0x11c/0x9c8 [jffs2]
__slab_alloc.isra.21.constprop.25+0x2c/0x44
__kmalloc+0x1dc/0x370
jffs2_write_dirent+0x11c/0x9c8 [jffs2]
jffs2_do_unlink+0x328/0x5fc [jffs2]
jffs2_rmdir+0x110/0x1cc [jffs2]
vfs_rmdir+0x180/0x268
do_rmdir+0x2cc/0x300
ret_from_syscall+0x0/0x3c
INFO: Freed in 0x205b age=3054364 cpu=0 pid=0
0x2e9173
jffs2_add_fd_to_list+0x138/0x1dc [jffs2]
jffs2_add_fd_to_list+0x138/0x1dc [jffs2]
jffs2_garbage_collect_dirent.isra.3+0x21c/0x288 [jffs2]
jffs2_garbage_collect_live+0x16bc/0x1800 [jffs2]
jffs2_garbage_collect_pass+0x678/0x11d4 [jffs2]
jffs2_garbage_collect_thread+0x1e8/0x3b0 [jffs2]
kthread+0x1a8/0x1b0
ret_from_kernel_thread+0x5c/0x64
Call Trace:
[c17ddd20] [c02452d4] kasan_report.part.0+0x298/0x72c (unreliable)
[c17ddda0] [d2509680] jffs2_rmdir+0xa4/0x1cc [jffs2]
[c17dddd0] [c026da04] vfs_rmdir+0x180/0x268
[c17dde00] [c026f4e4] do_rmdir+0x2cc/0x300
[c17ddf40] [c001a658] ret_from_syscall+0x0/0x3c
The root cause is that we don't get "jffs2_inode_info.sem" before
we scan list "jffs2_inode_info.dents" in function jffs2_rmdir.
This patch add codes to get "jffs2_inode_info.sem" before we scan
"jffs2_inode_info.dents" to slove the UAF problem.
Signed-off-by: Zhe Li <lizhe67@huawei.com>
Reviewed-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Thanks for the advice mentioned in the email.
This is my v3 patch for this problem.
Mounting jffs2 on nand flash will get message "failed: I/O error"
with the steps listed below.
1.umount jffs2
2.erase nand flash
3.mount jffs2 on it (this mounting operation will be successful)
4.do chown or chmod to the mount point directory
5.umount jffs2
6.mount jffs2 on nand flash
After step 6, we will get message "mount ... failed: I/O error".
Typical image of this problem is like:
Empty space found from 0x00000000 to 0x008a0000
Inode node at xx, totlen 0x00000044, #ino 1, version 1, isize 0...
The reason for this mounting failure is that at the end of function
jffs2_scan_medium(), jffs2 will check the used_size and some info
of nr_blocks.If conditions are met, it will return -EIO.
The detail is that, in the steps listed above, step 4 will write
jffs2_raw_inode into flash without jffs2_raw_dirent, which will
cause that there are some jffs2_raw_inode but no jffs2_raw_dirent
on flash. This will meet the condition at the end of function
jffs2_scan_medium() and return -EIO if we umount jffs2 and mount it
again.
We notice that jffs2 add the value of c->unchecked_size if we find
an inode node while mounting. And jffs2 will never add the value of
c->unchecked_size in other situations. So this patch add one more
condition about c->unchecked_size of the judgement to fix this problem.
Signed-off-by: Zhe Li <lizhe67@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
There a wrong orphan node deleting in error handling path in
ubifs_jnl_update() and ubifs_jnl_rename(), which may cause
following error msg:
UBIFS error (ubi0:0 pid 1522): ubifs_delete_orphan [ubifs]:
missing orphan ino 65
Fix this by checking whether the node has been operated for
adding to orphan list before being deleted,
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Fixes: 823838a486 ("ubifs: Add hashes to the tree node cache")
Signed-off-by: Richard Weinberger <richard@nod.at>
Drop the repeated word "as" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Instead of creating ubifs file systems with UBIFS_FORMAT_VERSION
by default, add a module parameter ubifs.default_version to allow
the user to specify the desired version. Valid values are 4 to
UBIFS_FORMAT_VERSION (currently 5).
This way, one can for example create a file system with version 4
on kernel 4.19 which can still be mounted rw when downgrading to
kernel 4.9.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
nfs_wb_all() calls filemap_write_and_wait(), which uses
filemap_check_errors() to determine the error to return.
filemap_check_errors() only looks at the mapping->flags and will
therefore only return either -ENOSPC or -EIO. To ensure that the
correct error is returned on close(), nfs{,4}_file_flush() should call
filemap_check_wb_err() which looks at the errseq value in
mapping->wb_err without consuming it.
Fixes: 6fbda89b25 ("NFS: Replace custom error reporting mechanism with
generic one")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
As recently done with with send/recv, flip the if after
rw_verify_aread() in io_{read,write}() and tabulise left bits left.
This removes mispredicted by a compiler jump on the success/fast path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As soon as we install the file descriptor, we have to assume that it
can get arbitrarily closed. We currently account memory (and note that
we did) after installing the ring fd, which means that it could be a
potential use-after-free condition if the fd is closed right after
being installed, but before we fiddle with the ctx.
In fact, syzbot reported this exact scenario:
BUG: KASAN: use-after-free in io_account_mem fs/io_uring.c:7397 [inline]
BUG: KASAN: use-after-free in io_uring_create fs/io_uring.c:8369 [inline]
BUG: KASAN: use-after-free in io_uring_setup+0x2797/0x2910 fs/io_uring.c:8400
Read of size 1 at addr ffff888087a41044 by task syz-executor.5/18145
CPU: 0 PID: 18145 Comm: syz-executor.5 Not tainted 5.8.0-rc7-next-20200729-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x18f/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
io_account_mem fs/io_uring.c:7397 [inline]
io_uring_create fs/io_uring.c:8369 [inline]
io_uring_setup+0x2797/0x2910 fs/io_uring.c:8400
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45c429
Code: 8d b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f8f121d0c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9
RAX: ffffffffffffffda RBX: 0000000000008540 RCX: 000000000045c429
RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000196
RBP: 000000000078bf38 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000078bf0c
R13: 00007fff86698cff R14: 00007f8f121d19c0 R15: 000000000078bf0c
Move the accounting of the ring used locked memory before we get and
install the ring file descriptor.
Cc: stable@vger.kernel.org
Reported-by: syzbot+9d46305e76057f30c74e@syzkaller.appspotmail.com
Fixes: 309758254e ("io_uring: report pinned memory usage")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a simple helper to set timestamps with a kernel space file name and
switch the early init code over to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a simple helper to mknod with a kernel space file name and switch
the early init code over to it. Remove the now unused ksys_mknod.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a simple helper to mkdir with a kernel space file name and switch
the early init code over to it. Remove the now unused ksys_mkdir.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a simple helper to symlink with a kernel space file name and switch
the early init code over to it. Remove the now unused ksys_symlink.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a simple helper to link with a kernel space file name and switch
the early init code over to it. Remove the now unused ksys_link.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a simple helper to check if a file exists based on kernel space file
name and switch the early init code over to it. Note that this
theoretically changes behavior as it always is based on the effective
permissions. But during early init that doesn't make a difference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a simple helper to chroot with a kernel space file name and switch
the early init code over to it. Remove the now unused ksys_chroot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a simple helper to chdir with a kernel space file name and switch
the early init code over to it. Remove the now unused ksys_chdir.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a simple helper to rmdir with a kernel space file name and switch
the early init code over to it. Remove the now unused ksys_rmdir.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a simple helper to unlink with a kernel space file name and switch
the early init code over to it. Remove the now unused ksys_unlink.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Like ksys_umount, but takes a kernel pointer for the destination path.
Switch over the umount in the init code, which just happen to work due to
the implicit set_fs(KERNEL_DS) during early init right now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Like do_mount, but takes a kernel pointer for the destination path.
Switch over the mounts in the init code and devtmpfs to it, which
just happen to work due to the implicit set_fs(KERNEL_DS) during early
init right now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
This mirrors do_unlinkat and will make life a little easier for
the init code to reuse the whole function with a kernel filename.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Factor out a path_umount helper that takes a struct path * instead of the
actual file name. This will allow to convert the init and devtmpfs code
to properly mount based on a kernel pointer instead of relying on the
implicit set_fs(KERNEL_DS) during early init.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Factor out a path_mount helper that takes a struct path * instead of the
actual file name. This will allow to convert the init and devtmpfs code
to properly mount based on a kernel pointer instead of relying on the
implicit set_fs(KERNEL_DS) during early init.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Rename utimes_common to vfs_utimes and make it available outside of
utimes.c. This will be used by the initramfs unpacking code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Consolidate the validation of the timespec from the two callers into
utimes_common. That means it is done a little later (e.g. after the
path lookup), but I can't find anything that requires a specific
order of processing the errors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Split out one helper each for path vs fd based operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove kmem_cache_alloc return value cast.
Coccinelle emits the following warning:
./fs/9p/vfs_inode.c:226:12-29: WARNING: casting value returned by memory allocation function to (struct v9fs_inode *) is useless.
Link: http://lkml.kernel.org/r/1596013140-49744-1-git-send-email-liheng40@huawei.com
Signed-off-by: Li Heng <liheng40@huawei.com>
[Dominique: commit message wording]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
The argument passed to xas_set_err() to indicate an error should be negative.
Otherwise, xas_error() will return 0, and grab_mapping_entry() will return the
found entry instead of 'SIGBUS' when the entry is not in fact valid.
This would result in problems in subsequent code paths.
Link: https://lore.kernel.org/r/20200729034436.24267-1-lihao2018.fnst@cn.fujitsu.com
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: Hao Li <lihao2018.fnst@cn.fujitsu.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
In fscrypt_set_bio_crypt_ctx(), ->i_crypt_info isn't known to be
non-NULL until we check fscrypt_inode_uses_inline_crypto(). So, load
->i_crypt_info after the check rather than before. This makes no
difference currently, but it prevents people from introducing bugs where
the pointer is dereferenced when it may be NULL.
Suggested-by: Dave Chinner <david@fromorbit.com>
Cc: Satya Tangirala <satyat@google.com>
Link: https://lore.kernel.org/r/20200727174158.121456-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Caches should be small enough to discard them inline, so do that
instead of using a work queue.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If ->cq_timeouts modifications are done under ->completion_lock, we
don't really nee any fetch-and-add and other complex atomics. Replace it
with non-atomic FAA, that saves an implicit full memory barrier.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to mark ctx->{cq,sq}_check_overflow to get rid of
duplicates, and it's clearer to check cq_overflow_list directly anyway.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Always do io_commit_cqring() after completing a request, even if it was
accounted as overflowed on the CQ side. Failing to do that may lead to
not to pushing deferred requests when needed, and so stalling the whole
ring.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All ->cq_overflow modifications should be under completion_lock,
otherwise it can report a wrong number to the userspace. Fix it in
io_uring_cancel_files().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call __io_complete_rw() in io_iopoll_queue() instead of hand coding it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As io_kiocb have enough space, move ->work out of a union. It's safer
this way and removes ->work memcpy bouncing.
By the way make tabulation in struct io_kiocb consistent.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason to mess with file descriptors from in-kernel
code, switch the initrd loading to struct file based read and writes
instead.
Also Pass an explicit offset instead of ->f_pos, and to make that easier,
use file scope file structs and offsets everywhere except for
identify_ramdisk_image instead of the current strange mix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-23-a.darwish@linutronix.de
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-22-a.darwish@linutronix.de
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-19-a.darwish@linutronix.de
1) FS_DAX_FL has been introduced by commit b383a73f2b.
2) In future, chattr/lsattr command from e2fsprogs can set/get
inode DAX on XFS by calling ioctl(SETXFLAGS/GETXFLAGS).
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Lift -ENOSPC handler from xfs_attr_leaf_addname. This will help to
reorganize transitions between the attr forms later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Invert the rename logic in xfs_attr_node_addname to simplify the
delayed attr logic later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Invert the rename logic in xfs_attr_leaf_addname to simplify the
delayed attr logic later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
This patch adds another new helper function
xfs_attr_node_removename_rmt. This will also help modularize
xfs_attr_node_removename when we add delay ready attributes later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
This patch adds a new helper function xfs_attr_node_removename_setup.
This will help modularize xfs_attr_node_removename when we add delay
ready attributes later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
[darrick: fix unused variable complaints by 0day robot]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
This patch adds two new helper functions xfs_attr_store_rmt_blk and
xfs_attr_restore_rmt_blk. These two helpers assist to remove redundant
code associated with storing and retrieving remote blocks during the
attr set operations.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
This patch helps to simplify xfs_attr_node_removename by modularizing
the code around the transactions into helper functions. This will make
the function easier to follow when we introduce delayed attributes.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
In this patch, we hoist code from xfs_attr_set_args into two new helpers
xfs_attr_is_shortform and xfs_attr_set_shortform. These two will help
to simplify xfs_attr_set_args when we get into delayed attrs later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
A transaction roll is not necessary immediately after setting the
INCOMPLETE flag when removing a node xattr entry with remote value
blocks. The remote block invalidation that immediately follows setting
the flag is an in-core only change. The next step after that is to start
unmapping the remote blocks from the attr fork, but the xattr remove
transaction reservation includes reservation for full tree splits of the
dabtree and bmap tree. The remote block unmap code will roll the
transaction as extents are unmapped and freed.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Some calls to xfs_trans_roll_inode and xfs_defer_finish routines are not
needed. If they are the last operations executed in these functions, and
no further changes are made, then higher level routines will roll or
commit the transactions.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
This patch adds a new helper function xfs_attr_node_shrink used to
shrink an attr name into an inode if it is small enough. This helps to
modularize the greater calling function xfs_attr_node_removename.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
This patch pulls xfs_attr_rmtval_invalidate out of
xfs_attr_rmtval_remove and into the calling functions. Eventually
__xfs_attr_rmtval_remove will replace xfs_attr_rmtval_remove when we
introduce delayed attributes. These functions are exepcted to return
-EAGAIN when they need a new transaction. Because the invalidate does
not need a new transaction, we need to separate it from the rest of the
function that does. This will enable __xfs_attr_rmtval_remove to
smoothly replace xfs_attr_rmtval_remove later.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Refactor xfs_attr_rmtval_remove to add helper function
__xfs_attr_rmtval_remove. We will use this later when we introduce
delayed attributes. This function will eventually replace
xfs_attr_rmtval_remove
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
New delayed allocation routines cannot be handling transactions so
pull them out into the calling functions
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Because new delayed attribute routines cannot roll transactions, we
carve off the parts of xfs_attr_rmtval_remove that we can use. This
will help to reduce repetitive code later when we introduce delayed
attributes.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
New delayed allocation routines cannot be handling transactions so
pull them up into the calling functions
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
To help pre-simplify xfs_attr_set_args, we need to hoist transaction
handling up, while modularizing the adjacent code down into helpers. In
this patch, hoist the commit in xfs_attr_try_sf_addname up into the
calling function, and also pull the attr list creation down.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Split out new helper function xfs_attr_leaf_try_add from
xfs_attr_leaf_addname. Because new delayed attribute routines cannot
roll transactions, we split off the parts of xfs_attr_leaf_addname that
we can use, and move the commit into the calling function.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Since delayed operations cannot roll transactions, pull up the
transaction handling into the calling function
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Break xfs_attr_rmtval_set into two helper functions
xfs_attr_rmt_find_hole and xfs_attr_rmtval_set_value.
xfs_attr_rmtval_set rolls the transaction between the helpers, but
delayed operations cannot. We will use the helpers later when
constructing new delayed attribute routines.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Delayed operations cannot return error codes. So we must check for
these conditions first before starting set or remove operations
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
This patch adds a new functions to check for the existence of an
attribute. Subroutines are also added to handle the cases of leaf
blocks, nodes or shortform. Common code that appears in existing attr
add and remove functions have been factored out to help reduce the
appearance of duplicated code. We will need these routines later for
delayed attributes since delayed operations cannot return error codes.
Signed-off-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix a leak-on-error bug reported by Dan Carpenter]
[darrick: fix unused variable warning reported by 0day]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reported-by: dan.carpenter@oracle.com
Reported-by: kernel test robot <lkp@intel.com>
Every call to xfs_da_state_alloc() also requires setting up state->args
and state->mp
Change xfs_da_state_alloc() to receive an xfs_da_args_t as argument and
return a xfs_da_state_t with both args and mp already set.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: reduce struct typedef usage]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
All their users have been converted to use MM API directly, no need to
keep them around anymore.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
xlog_ticket_alloc() is always called under NOFS context, except from
unmount path, which eitherway is holding many FS locks, so, there is no
need for its callers to keep passing allocation flags into it.
change xlog_ticket_alloc() to use default kmem_cache_zalloc(), remove
its alloc_flags argument, and always use GFP_NOFS | __GFP_NOFAIL flags.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use kmem_cache_zalloc() directly.
With the exception of xlog_ticket_alloc() which will be dealt on the
next patch for readability.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use kmem_cache_alloc() directly.
All kmem_zone_alloc() users pass 0 as flags, which are translated into:
GFP_KERNEL | __GFP_NOWARN, and kmem_zone_alloc() loops forever until the
allocation succeeds.
We can use __GFP_NOFAIL to tell the allocator to loop forever rather
than doing it ourself, and because the allocation will never fail, we do
not need to use __GFP_NOWARN anymore. Hence, all callers can be
converted to use GFP_KERNEL | __GFP_NOFAIL
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: add a comment back in about nofail]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Drop the repeated words "with" and "be" in comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The ondisk dquot stores the quota record type in the flags field.
Rename this field to d_type to make the _type relationship between the
ondisk and incore dquot more obvious.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create an XFS_DQTYPE_ANY mask for ondisk dquots flags, and use that to
ensure that we never accept any garbage flags when we're loading dquots.
While we're at it, restructure the quota type flag checking to use the
proper masking.
Note that I plan to add y2038 support soon, which will require a new
xfs_dqtype_t flag for extended timestamp support, hence all the work to
make the type masking work correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new type (xfs_dqtype_t) to represent the type of an incore
dquot (user, group, project, or none). Rename the incore dquot's
dq_flags field to q_type.
This allows us to replace all the "uint type" arguments to the quota
functions with "xfs_dqtype_t type", to make it obvious when we're
passing a quota type argument into a function.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix a few places where we open-coded this mask constant.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When XFS' quota functions take a parameter for the quota type, they only
care about the three quota record types (user, group, project).
Internal state flags and whatnot should never be passed by callers and
are an error. Now that we've moved responsibility for filtering out
internal state to the callers, we can drop the masking everywhere else.
In other words, if you call a quota function, you must only pass in
one of XFS_DQTYPE_{USER,GROUP,PROJ}.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Always use the xfs_dquot_type helper to extract the quota type from an
incore dquot. This moves responsibility for filtering internal state
information and whatnot to anybody passing around a struct xfs_dquot.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Certain functions can only act upon one quota type, so refactor those
functions to use switch statements, in keeping with all the other high
level xfs quota api calls.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove these macros and use xfs_dquot_type() for everything.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a small helper to test if enforcement is enabled for a
given incore dquot and replace the open-code logic testing.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We're going to split up the incore dquot state flags from the ondisk
dquot flags (eventually renaming this "type") so start by renaming the
three flags and the bitmask that are going to participate in this.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_qm_reset_dqcounts (aka quotacheck) is the only xfs_dqblk_verify
caller that actually knows the specific quota type that it's looking
for. Since everything else just pass in type==0 (including the buffer
verifier), drop the parameter and open-code the check like
xfs_dquot_from_disk already does.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add all the xfs_dquot fields to the tracepoint for that type; add a new
tracepoint type for the qtrx structure (dquot transaction deltas); and
use our new tracepoints. This makes it easier for the author to trace
changes to dquot counters for debugging.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently, xfs quotas have the ability to send netlink warnings when a
user exceeds the limits. They also have all the support code necessary
to convert softlimit warnings into failures if the number of warnings
exceeds a limit set by the administrator. Unfortunately, we never
actually increase the warning counter, so this never actually happens.
Make it so we actually do something useful with the warning counts.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
We always initialize the default quota limits to something nowadays, so
we don't need to check that the defaults are set to something before
using them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Hoist the code that adjusts the incore quota reservation count
adjustments into a separate function, both to reduce the level of
indentation and also to reduce the amount of open-coded logic.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've refactored the resource usage and limits into
per-resource structures, we can refactor some of the open-coded
reservation limit checking in xfs_trans_dqresv.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we can pass around quota resource and limit structures, clean
up the open-coded field setting in xfs_qm_scall_setqlim.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Refactor the open-coded test for whether or not we're over quota.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
struct xfs_dquot already has a pointer to the xfs mount, so remove the
redundant parameter from xfs_qm_adjust_dq*.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've split up the dquot resource fields into separate structs,
do the same for the default limits to enable further refactoring.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've stopped using qcore entirely, drop it from the incore
dquot.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add timers fields to the incore dquot, and use that instead of the ones
in qcore. This eliminates a bunch of endian conversions and will
eventually allow us to remove qcore entirely.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Add warning counter fields to the incore dquot, and use that instead of
the ones in qcore. This eliminates a bunch of endian conversions and
will eventually allow us to remove qcore entirely.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Add counter fields to the incore dquot, and use that instead of the ones
in qcore. This eliminates a bunch of endian conversions and will
eventually allow us to remove qcore entirely.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Add limits fields in the incore dquot, and use that instead of the ones
in qcore. This eliminates a bunch of endian conversions and will
eventually allow us to remove qcore entirely.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Introduce a new struct xfs_dquot_res that we'll use to track all the
incore data for a particular resource type (block, inode, rt block).
This will help us (once we've eliminated q_core) to declutter quota
functions that currently open-code field access or pass around fields
around explicitly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Add a dquot id field to the incore dquot, and use that instead of the
one in qcore. This eliminates a bunch of endian conversions and will
eventually allow us to remove qcore entirely.
We also rearrange the start of xfs_dquot to remove padding holes, saving
8 bytes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Use the incore dq_flags to figure out the dquot type. This is the first
step towards removing xfs_disk_dquot from the incore dquot.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Move the dquot cluster size #define to xfs_format.h. It is an important
part of the ondisk format because the ondisk dquot record size is not an
even power of two, which means that the buffer size we use is
significant here because the kernel leaves slack space at the end of the
buffer to avoid having to deal with a dquot record crossing a block
boundary.
This is also an excuse to fix one of the longstanding discrepancies
between kernel and userspace libxfs headers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Rename the existing incore dquot "dq_flags" field to "q_flags" to match
everything else in the structure, then move the two actual dquot state
flags to the XFS_DQFLAG_ namespace from XFS_DQ_.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
We only use the XFS_QMOPT flags in quotacheck to signal the quota type,
so rip out all the flags handling and just pass the type all the way
through.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Since xfs_qm_scall_trunc_qfiles can take a bitset of quota types that we
want to truncate, change the flags argument to take XFS_QMOPT_[UGP}QUOTA
so that the next patch can start to deprecate XFS_DQ_*.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
While loading dquot records off disk, make sure that the quota type
flags are the same between the incore dquot and the ondisk dquot.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
xfs_trans_dqresv is the function that we use to make reservations
against resource quotas. Each resource contains two counters: the
q_core counter, which tracks resources allocated on disk; and the dquot
reservation counter, which tracks how much of that resource has either
been allocated or reserved by threads that are working on metadata
updates.
For disk blocks, we compare the proposed reservation counter against the
hard and soft limits to decide if we're going to fail the operation.
However, for inodes we inexplicably compare against the q_core counter,
not the incore reservation count.
Since the q_core counter is always lower than the reservation count and
we unlock the dquot between reservation and transaction commit, this
means that multiple threads can reserve the last inode count before we
hit the hard limit, and when they commit, we'll be well over the hard
limit.
Fix this by checking against the incore inode reservation counter, since
we would appear to maintain that correctly (and that's what we report in
GETQUOTA).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In commit 8d3d7e2b35, we changed xfs_qm_dqpurge to bail out if we
can't lock the dquot buf to flush the dquot. This prevents the AIL from
blocking on the dquot, but it also forgets to clear the FREEING flag on
its way out. A subsequent purge attempt will see the FREEING flag is
set and bail out, which leads to dqpurge_all failing to purge all the
dquots.
(copy-pasting from Dave Chinner's identical patch)
This was found by inspection after having xfs/305 hang 1 in ~50
iterations in a quotaoff operation:
[ 8872.301115] xfs_quota D13888 92262 91813 0x00004002
[ 8872.302538] Call Trace:
[ 8872.303193] __schedule+0x2d2/0x780
[ 8872.304108] ? do_raw_spin_unlock+0x57/0xd0
[ 8872.305198] schedule+0x6e/0xe0
[ 8872.306021] schedule_timeout+0x14d/0x300
[ 8872.307060] ? __next_timer_interrupt+0xe0/0xe0
[ 8872.308231] ? xfs_qm_dqusage_adjust+0x200/0x200
[ 8872.309422] schedule_timeout_uninterruptible+0x2a/0x30
[ 8872.310759] xfs_qm_dquot_walk.isra.0+0x15a/0x1b0
[ 8872.311971] xfs_qm_dqpurge_all+0x7f/0x90
[ 8872.313022] xfs_qm_scall_quotaoff+0x18d/0x2b0
[ 8872.314163] xfs_quota_disable+0x3a/0x60
[ 8872.315179] kernel_quotactl+0x7e2/0x8d0
[ 8872.316196] ? __do_sys_newstat+0x51/0x80
[ 8872.317238] __x64_sys_quotactl+0x1e/0x30
[ 8872.318266] do_syscall_64+0x46/0x90
[ 8872.319193] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 8872.320490] RIP: 0033:0x7f46b5490f2a
[ 8872.321414] Code: Bad RIP value.
Returning -EAGAIN from xfs_qm_dqpurge() without clearing the
XFS_DQ_FREEING flag means the xfs_qm_dqpurge_all() code can never
free the dquot, and we loop forever waiting for the XFS_DQ_FREEING
flag to go away on the dquot that leaked it via -EAGAIN.
Fixes: 8d3d7e2b35 ("xfs: trylock underlying buffer on dquot flush")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The block reservation calculation for inode allocation is supposed
to consist of the blocks required for the inode chunk plus
(maxlevels-1) of the inode btree multiplied by the number of inode
btrees in the fs (2 when finobt is enabled, 1 otherwise).
Instead, the macro returns (ialloc_blocks + 2) due to a precedence
error in the calculation logic. This leads to block reservation
overruns via generic/531 on small block filesystems with finobt
enabled. Add braces to fix the calculation and reserve the
appropriate number of blocks.
Fixes: 9d43b180af ("xfs: update inode allocation/free transaction reservations for finobt")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfsaild is racy with respect to transaction abort and shutdown in
that the task can idle or exit with an empty AIL but buffers still
on the delwri queue. This was partly addressed by cancelling the
delwri queue before the task exits to prevent memory leaks, but it's
also possible for xfsaild to empty and idle with buffers on the
delwri queue. For example, a transaction that pins a buffer that
also happens to sit on the AIL delwri queue will explicitly remove
the associated log item from the AIL if the transaction aborts. The
side effect of this is an unmount hang in xfs_wait_buftarg() as the
associated buffers remain held by the delwri queue indefinitely.
This is reproduced on repeated runs of generic/531 with an fs format
(-mrmapbt=1 -bsize=1k) that happens to also reproduce transaction
aborts.
Update xfsaild to not idle until both the AIL and associated delwri
queue are empty and update the push code to continue delwri queue
submission attempts even when the AIL is empty. This allows the AIL
to eventually release aborted buffers stranded on the delwri queue
when they are unlocked by the associated transaction. This should
have no significant effect on normal runtime behavior because the
xfsaild currently idles only when the AIL is empty and in practice
the AIL is rarely empty with a populated delwri queue. The items
must be AIL resident to land in the queue in the first place and
generally aren't removed until writeback completes.
Note that the pre-existing delwri queue cancel logic in the exit
path is retained because task stop is external, could technically
come at any point, and xfsaild is still responsible to release its
buffer references before it exits.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Passing size to copy_user_dax implies it can copy variable sizes of data
when in fact it calls copy_user_page() which is exactly a page.
We are safe because the only caller uses PAGE_SIZE anyway so just remove
the variable for clarity.
While we are at it change copy_user_dax() to copy_cow_page_dax() to make
it clear it is a singleton helper for this one case not implementing
what dax_iomap_actor() does.
Link: https://lore.kernel.org/r/20200717072056.73134-11-ira.weiny@intel.com
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Al Viro pointed out that I broke some acl functionality...
* ACLs could not be fully removed
* posix_acl_chmod would be called while the old ACL was still cached
* new mode propagated to orangefs server before ACL.
... when I tried to make sure that modes that got changed as a
result of ACL-sets would be sent back to the orangefs server.
Not wanting to try and change the code without having some cases to
test it with, I began to hunt for setfacl examples that were expressible
in pure mode. Along the way I found examples like the following
which confused me:
user A had a file (/home/A/asdf) with mode 740
user B was in user A's group
user C was not in user A's group
setfacl -m u:C:rwx /home/A/asdf
The above setfacl caused ls -l /home/A/asdf to show a mode of 770,
making it appear that all users in user A's group now had full access
to /home/A/asdf, however, user B still only had read acces. Madness.
Anywho, I finally found that the above (whacky as it is) appears to
be "posixly on purpose" and explained in acl(5):
If the ACL has an ACL_MASK entry, the group permissions correspond
to the permissions of the ACL_MASK entry.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
The variable result is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When merging name events, fsids of the two involved events have to
match. Otherwise we could merge events from two different filesystems
and thus effectively loose the second event.
Backporting note: Although the commit cacfb956d4 introducing this bug
was merged for 5.7, the relevant code didn't get used in the end until
7e8283af6e ("fanotify: report parent fid + name + child fid") which
will be merged with this patch. So there's no need for backporting this.
Fixes: cacfb956d4 ("fanotify: record name info for FAN_DIR_MODIFY event")
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The method handle_event() grew a lot of complexity due to the design of
fanotify and merging of ignore masks.
Most backends do not care about this complex functionality, so we can hide
this complexity from them.
Introduce a method handle_inode_event() that serves those backends and
passes a single inode mark and less arguments.
This change converts all backends except fanotify and inotify to use the
simplified handle_inode_event() method. In pricipal, inotify could have
also used the new method, but that would require passing more arguments
on the simple helper (data, data_type, cookie), so we leave it with the
handle_event() method.
Link: https://lore.kernel.org/r/20200722125849.17418-9-amir73il@gmail.com
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Add support for FAN_REPORT_FID | FAN_REPORT_DIR_FID.
Internally, it is implemented as a private case of reporting both
parent and child fids and name, the parent and child fids are recorded
in a variable length fanotify_name_event, but there is no name.
It should be noted that directory modification events are recorded
in fixed size fanotify_fid_event when not reporting name, just like
with group flags FAN_REPORT_FID.
Link: https://lore.kernel.org/r/20200716084230.30611-23-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
For a group with fanotify_init() flag FAN_REPORT_DFID_NAME, the parent
fid and name are reported for events on non-directory objects with an
info record of type FAN_EVENT_INFO_TYPE_DFID_NAME.
If the group also has the init flag FAN_REPORT_FID, the child fid
is also reported with another info record that follows the first info
record. The second info record is the same info record that would have
been reported to a group with only FAN_REPORT_FID flag.
When the child fid needs to be recorded, the variable size struct
fanotify_name_event is preallocated with enough space to store the
child fh between the dir fh and the name.
Link: https://lore.kernel.org/r/20200716084230.30611-22-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Introduce a new fanotify_init() flag FAN_REPORT_NAME. It requires the
flag FAN_REPORT_DIR_FID and there is a constant for setting both flags
named FAN_REPORT_DFID_NAME.
For a group with flag FAN_REPORT_NAME, the parent fid and name are
reported for directory entry modification events (create/detete/move)
and for events on non-directory objects.
Events on directories themselves are reported with their own fid and
"." as the name.
The parent fid and name are reported with an info record of type
FAN_EVENT_INFO_TYPE_DFID_NAME, similar to the way that parent fid is
reported with into type FAN_EVENT_INFO_TYPE_DFID, but with an appended
null terminated name string.
Link: https://lore.kernel.org/r/20200716084230.30611-21-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
In a group with flag FAN_REPORT_DIR_FID, when adding an inode mark with
FAN_EVENT_ON_CHILD, events on non-directory children are reported with
the fid of the parent.
When adding a filesystem or mount mark or mark on a non-dir inode, we
want to report events that are "possible on child" (e.g. open/close)
also with fid of the parent, as if the victim inode's parent is
interested in events "on child".
Some events, currently only FAN_MOVE_SELF, should be reported to a
sb/mount/non-dir mark with parent fid even though they are not
reported to a watching parent.
To get the desired behavior we set the flag FAN_EVENT_ON_CHILD on
all the sb/mount/non-dir mark masks in a group with FAN_REPORT_DIR_FID.
Link: https://lore.kernel.org/r/20200716084230.30611-20-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
For now, the flag is mutually exclusive with FAN_REPORT_FID.
Events include a single info record of type FAN_EVENT_INFO_TYPE_DFID
with a directory file handle.
For now, events are only reported for:
- Directory modification events
- Events on children of a watching directory
- Events on directory objects
Soon, we will add support for reporting the parent directory fid
for events on non-directories with filesystem/mount mark and
support for reporting both parent directory fid and child fid.
Link: https://lore.kernel.org/r/20200716084230.30611-19-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Similar to events "on child" to watching directory, send event
with parent/name info if sb/mount/non-dir marks are interested in
parent/name info.
The FS_EVENT_ON_CHILD flag can be set on sb/mount/non-dir marks to specify
interest in parent/name info for events on non-directory inodes.
Events on "orphan" children (disconnected dentries) are sent without
parent/name info.
Events on directories are sent with parent/name info only if the parent
directory is watching.
After this change, even groups that do not subscribe to events on
children could get an event with mark iterator type TYPE_CHILD and
without mark iterator type TYPE_INODE if fanotify has marks on the same
objects.
dnotify and inotify event handlers can already cope with that situation.
audit does not subscribe to events that are possible on child, so won't
get to this situation. nfsd does not access the marks iterator from its
event handler at the moment, so it is not affected.
This is a bit too fragile, so we should prepare all groups to cope with
mark type TYPE_CHILD preferably using a generic helper.
Link: https://lore.kernel.org/r/20200716084230.30611-16-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
FS_EVENT_ON_CHILD has currently no meaning for non-dir inode marks. In
the following patches we want to use that bit to mean that mark's
notification group cares about parent and name information. So stop
setting FS_EVENT_ON_CHILD for non-dir marks.
Link: https://lore.kernel.org/r/20200722125849.17418-3-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The arguments of fsnotify() are overloaded and mean different things
for different event types.
Replace the to_tell argument with separate arguments @dir and @inode,
because we may be sending to both dir and child. Using the @data
argument to pass the child is not enough, because dirent events pass
this argument (for audit), but we do not report to child.
Document the new fsnotify() function argumenets.
Link: https://lore.kernel.org/r/20200722125849.17418-7-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Instead of calling fsnotify() twice, once with parent inode and once
with child inode, if event should be sent to parent inode, send it
with both parent and child inodes marks in object type iterator and call
the backend handle_event() callback only once.
The parent inode is assigned to the standard "inode" iterator type and
the child inode is assigned to the special "child" iterator type.
In that case, the bit FS_EVENT_ON_CHILD will be set in the event mask,
the dir argument to handle_event will be the parent inode, the file_name
argument to handle_event is non NULL and refers to the name of the child
and the child inode can be accessed with fsnotify_data_inode().
This will allow fanotify to make decisions based on child or parent's
ignored mask. For example, when a parent is interested in a specific
event on its children, but a specific child wishes to ignore this event,
the event will not be reported. This is not what happens with current
code, but according to man page, it is the expected behavior.
Link: https://lore.kernel.org/r/20200716084230.30611-15-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
fsnotify usually calls inotify_handle_event() once for watching parent
to report event with child's name and once for watching child to report
event without child's name.
Do the same thing with a single callback instead of two callbacks when
marks iterator contains both inode and child entries.
Link: https://lore.kernel.org/r/20200716084230.30611-13-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
For some events (e.g. DN_ATTRIB on sub-directory) fsnotify may call
dnotify_handle_event() once for watching parent and once again for
the watching sub-directory.
Do the same thing with a single callback instead of two callbacks when
marks iterator contains both inode and child entries.
Link: https://lore.kernel.org/r/20200716084230.30611-12-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The fanotify_fh struct has an inline buffer of size 12 which is enough
to store the most common local filesystem file handles (e.g. ext4, xfs).
For file handles that do not fit in the inline buffer (e.g. btrfs), an
external buffer is allocated to store the file handle.
When allocating a variable size fanotify_name_event, there is no point
in allocating also an external fh buffer when file handle does not fit
in the inline buffer.
Check required size for encoding fh, preallocate an event buffer
sufficient to contain both file handle and name and store the name after
the file handle.
At this time, when not reporting name in event, we still allocate
the fixed size fanotify_fid_event and an external buffer for large
file handles, but fanotify_alloc_name_event() has already been prepared
to accept a NULL file_name.
Link: https://lore.kernel.org/r/20200716084230.30611-11-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
An fanotify event name is always recorded relative to a dir fh.
Encapsulate the name_len member of fanotify_name_event in a new struct
fanotify_info, which describes the parceling of the variable size
buffer of an fanotify_name_event.
The dir_fh member of fanotify_name_event is renamed to _dir_fh and is not
accessed directly, but via the fanotify_info_dir_fh() accessor.
Although the dir_fh len information is already available in struct
fanotify_fh, we store it also in dif_fh_totlen member of fanotify_info,
including the size of fanotify_fh header, so we know the offset of the
name in the buffer without looking inside the dir_fh.
We also add a file_fh_totlen member to allow packing another file handle
in the variable size buffer after the dir_fh and before the name.
We are going to use that space to store the child fid.
Link: https://lore.kernel.org/r/20200716084230.30611-10-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Up to now, fanotify allowed to set the FAN_EVENT_ON_CHILD flag on
sb/mount marks and non-directory inode mask, but the flag was ignored.
Mask out the flag if it is provided by user on sb/mount/non-dir marks
and define it as an implicit flag that cannot be removed by user.
This flag is going to be used internally to request for events with
parent and name info.
Link: https://lore.kernel.org/r/20200716084230.30611-8-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
So far, all flags that can be set in an fanotify mark mask can be set
explicitly by a call to fanotify_mark(2).
Prepare for defining implicit event flags that cannot be set by user with
fanotify_mark(2), similar to how inotify/dnotify implicitly set the
FS_EVENT_ON_CHILD flag.
Implicit event flags cannot be removed by user and mark gets destroyed
when only implicit event flags remain in the mask.
Link: https://lore.kernel.org/r/20200716084230.30611-7-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The special event flags (FAN_ONDIR, FAN_EVENT_ON_CHILD) never had
any meaning in ignored mask. Mask them out explicitly.
Link: https://lore.kernel.org/r/20200716084230.30611-6-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
As preparation for new flags that report fids, define a bit set
of flags for a group reporting fids, currently containing the
only bit FAN_REPORT_FID.
Link: https://lore.kernel.org/r/20200716084230.30611-5-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
In fanotify_encode_fh(), both cases of NULL inode and failure to encode
ended up with fh type FILEID_INVALID.
Distiguish the case of NULL inode, by setting fh type to FILEID_ROOT.
This is just a semantic difference at this point.
Remove stale comment and unneeded check from fid event compare helpers.
Link: https://lore.kernel.org/r/20200716084230.30611-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
An event on directory should never be merged with an event on
non-directory regardless of the event struct type.
This change has no visible effect, because currently, with struct
fanotify_path_event, the relevant events will not be merged because
event path of dir will be different than event path of non-dir.
Link: https://lore.kernel.org/r/20200716084230.30611-3-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
In fanotify_group_event_mask() there is logic in place to make sure we
are not going to handle an event with no type and just FAN_ONDIR flag.
Generalize this logic to any FANOTIFY_EVENT_FLAGS.
There is only one more flag in this group at the moment -
FAN_EVENT_ON_CHILD. We never report it to user, but we do pass it in to
fanotify_alloc_event() when group is reporting fid as indication that
event happened on child. We will have use for this indication later on.
Link: https://lore.kernel.org/r/20200716084230.30611-2-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
It was never enabled in uapi and its functionality is about to be
superseded by events FAN_CREATE, FAN_DELETE, FAN_MOVE with group
flag FAN_REPORT_NAME.
Keep a place holder variable name_event instead of removing the
name recording code since it will be used by the new events.
Link: https://lore.kernel.org/r/20200708111156.24659-17-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
similar to how elf coredump is working on architectures that
have regsets, and all architectures with elf-fdpic support *do*
have that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
the only reason to have it open-coded for the first (dumper) thread is
that coredump has a couple of process-wide notes stuck right after the
first (NT_PRSTATUS) note of the first thread. But we don't need to
make the data collection side irregular for the first thread to handle
that - it's only the logics ordering the calls of writenote() that
needs to take care of that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
all uses are conditional upon ELF_CORE_COPY_XFPREGS, which has not
been defined on any architecture since 2010
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The only architecture where we might end up using both is arm,
and there we definitely don't want fdpic-related fields in
elf_prstatus - coredump layout of ELF binaries should not
depend upon having the kernel built with the support of ELF_FDPIC
ones. Just move the fdpic-modified variant into binfmt_elf_fdpic.c
(and call it elf_prstatus_fdpic there)
[name stolen from nico]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Two new helpers: given a process and regset, dump into a buffer.
regset_get() takes a buffer and size, regset_get_alloc() takes size
and allocates a buffer.
Return value in both cases is the amount of data actually dumped in
case of success or -E... on error.
In both cases the size is capped by regset->n * regset->size, so
->get() is called with offset 0 and size no more than what regset
expects.
binfmt_elf.c callers of ->get() are switched to using those; the other
caller (copy_regset_to_user()) will need some preparations to switch.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The 'inode' argument to handle_event(), sometimes referred to as
'to_tell' is somewhat obsolete.
It is a remnant from the times when a group could only have an inode mark
associated with an event.
We now pass an iter_info array to the callback, with all marks associated
with an event.
Most backends ignore this argument, with two exceptions:
1. dnotify uses it for sanity check that event is on directory
2. fanotify uses it to report fid of directory on directory entry
modification events
Remove the 'inode' argument and add a 'dir' argument.
The callback function signature is deliberately changed, because
the meaning of the argument has changed and the arguments have
been documented.
The 'dir' argument is set to when 'file_name' is specified and it is
referring to the directory that the 'file_name' entry belongs to.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When removing an extent map at try_release_extent_mapping(), called through
the page release callback (btrfs_releasepage()), we always set the full
sync flag on the inode, which forces the next fsync to use a slower code
path.
This hurts performance for workloads that dirty an amount of data that
exceeds or is very close to the system's RAM memory and do frequent fsync
operations (like database servers can for example). In particular if there
are concurrent fsyncs against different files, by falling back to a full
fsync we do a lot more checksum lookups in the checksums btree, as we do
it for all the extents created in the current transaction, instead of only
the new ones since the last fsync. These checksums lookups not only take
some time but, more importantly, they also cause contention on the
checksums btree locks due to the concurrency with checksum insertions in
the btree by ordered extents from other inodes.
We actually don't need to set the full sync flag on the inode, because we
only remove extent maps that are in the list of modified extents if they
were created in a past transaction, in which case an fsync skips them as
it's pointless to log them. So stop setting the full fsync flag on the
inode whenever we remove an extent map.
This patch is part of a patchset that consists of 3 patches, which have
the following subjects:
1/3 btrfs: fix race between page release and a fast fsync
2/3 btrfs: release old extent maps during page release
3/3 btrfs: do not set the full sync flag on the inode during page release
Performance tests were ran against a branch (misc-next) containing the
whole patchset. The test exercises a workload where there are multiple
processes writing to files and fsyncing them (each writing and fsyncing
its own file), and in total the amount of data dirtied ranges from 2x to
4x the system's RAM memory (16GiB), so that the page release callback is
invoked frequently.
The following script, using fio, was used to perform the tests:
$ cat test-fsync.sh
#!/bin/bash
DEV=/dev/sdk
MNT=/mnt/sdk
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-d single -m single"
if [ $# -ne 3 ]; then
echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ"
exit 1
fi
NUM_JOBS=$1
FILE_SIZE=$2
FSYNC_FREQ=$3
cat <<EOF > /tmp/fio-job.ini
[writers]
rw=write
fsync=$FSYNC_FREQ
fallocate=none
group_reporting=1
direct=0
bs=64k
ioengine=sync
size=$FILE_SIZE
directory=$MNT
numjobs=$NUM_JOBS
thread
EOF
echo "Using config:"
echo
cat /tmp/fio-job.ini
echo
mkfs.btrfs -f $MKFS_OPTIONS $DEV &> /dev/null
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
The tests were performed for different numbers of jobs, file sizes and
fsync frequency. A qemu VM using kvm was used, with 8 cores (the host has
12 cores, with cpu governance set to performance mode on all cores), 16GiB
of ram (the host has 64GiB) and using a NVMe device directly (without an
intermediary filesystem in the host). While running the tests, the host
was not used for anything else, to avoid disturbing the tests.
The obtained results were the following, and the last line printed by
fio is pasted (includes aggregated throughput and test run time).
*****************************************************
**** 1 job, 32GiB file, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=29.1MiB/s (30.5MB/s), 29.1MiB/s-29.1MiB/s (30.5MB/s-30.5MB/s), io=32.0GiB (34.4GB), run=1127557-1127557msec
After patchset:
WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=32.0GiB (34.4GB), run=1119042-1119042msec
(+0.7% throughput, -0.8% run time)
*****************************************************
**** 2 jobs, 16GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=33.5MiB/s (35.1MB/s), 33.5MiB/s-33.5MiB/s (35.1MB/s-35.1MB/s), io=32.0GiB (34.4GB), run=979000-979000msec
After patchset:
WRITE: bw=39.9MiB/s (41.8MB/s), 39.9MiB/s-39.9MiB/s (41.8MB/s-41.8MB/s), io=32.0GiB (34.4GB), run=821283-821283msec
(+19.1% throughput, -16.1% runtime)
*****************************************************
**** 4 jobs, 8GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=52.1MiB/s (54.6MB/s), 52.1MiB/s-52.1MiB/s (54.6MB/s-54.6MB/s), io=32.0GiB (34.4GB), run=629130-629130msec
After patchset:
WRITE: bw=71.8MiB/s (75.3MB/s), 71.8MiB/s-71.8MiB/s (75.3MB/s-75.3MB/s), io=32.0GiB (34.4GB), run=456357-456357msec
(+37.8% throughput, -27.5% runtime)
*****************************************************
**** 8 jobs, 4GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=76.1MiB/s (79.8MB/s), 76.1MiB/s-76.1MiB/s (79.8MB/s-79.8MB/s), io=32.0GiB (34.4GB), run=430708-430708msec
After patchset:
WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=245458-245458msec
(+74.7% throughput, -43.0% run time)
*****************************************************
**** 16 jobs, 2GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=74.7MiB/s (78.3MB/s), 74.7MiB/s-74.7MiB/s (78.3MB/s-78.3MB/s), io=32.0GiB (34.4GB), run=438625-438625msec
After patchset:
WRITE: bw=184MiB/s (193MB/s), 184MiB/s-184MiB/s (193MB/s-193MB/s), io=32.0GiB (34.4GB), run=177864-177864msec
(+146.3% throughput, -59.5% run time)
*****************************************************
**** 32 jobs, 2GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=72.6MiB/s (76.1MB/s), 72.6MiB/s-72.6MiB/s (76.1MB/s-76.1MB/s), io=64.0GiB (68.7GB), run=902615-902615msec
After patchset:
WRITE: bw=227MiB/s (238MB/s), 227MiB/s-227MiB/s (238MB/s-238MB/s), io=64.0GiB (68.7GB), run=288936-288936msec
(+212.7% throughput, -68.0% run time)
*****************************************************
**** 64 jobs, 1GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=98.8MiB/s (104MB/s), 98.8MiB/s-98.8MiB/s (104MB/s-104MB/s), io=64.0GiB (68.7GB), run=663126-663126msec
After patchset:
WRITE: bw=294MiB/s (308MB/s), 294MiB/s-294MiB/s (308MB/s-308MB/s), io=64.0GiB (68.7GB), run=222940-222940msec
(+197.6% throughput, -66.4% run time)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When removing an extent map at try_release_extent_mapping(), called through
the page release callback (btrfs_releasepage()), we never release an extent
map that is in the list of modified extents. This is to prevent races with
a concurrent fsync using the fast path, which could lead to not logging an
extent created in the current transaction.
However we can safely remove an extent map created in a past transaction
that is still in the list of modified extents (because no one fsynced yet
the inode after that transaction got commited), because such extents are
skipped during an fsync as it is pointless to log them. This change does
that.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When releasing an extent map, done through the page release callback, we
can race with an ongoing fast fsync and cause the fsync to miss a new
extent and not log it. The steps for this to happen are the following:
1) A page is dirtied for some inode I;
2) Writeback for that page is triggered by a path other than fsync, for
example by the system due to memory pressure;
3) When the ordered extent for the extent (a single 4K page) finishes,
we unpin the corresponding extent map and set its generation to N,
the current transaction's generation;
4) The btrfs_releasepage() callback is invoked by the system due to
memory pressure for that no longer dirty page of inode I;
5) At the same time, some task calls fsync on inode I, joins transaction
N, and at btrfs_log_inode() it sees that the inode does not have the
full sync flag set, so we proceed with a fast fsync. But before we get
into btrfs_log_changed_extents() and lock the inode's extent map tree:
6) Through btrfs_releasepage() we end up at try_release_extent_mapping()
and we remove the extent map for the new 4Kb extent, because it is
neither pinned anymore nor locked. By calling remove_extent_mapping(),
we remove the extent map from the list of modified extents, since the
extent map does not have the logging flag set. We unlock the inode's
extent map tree;
7) The task doing the fast fsync now enters btrfs_log_changed_extents(),
locks the inode's extent map tree and iterates its list of modified
extents, which no longer has the 4Kb extent in it, so it does not log
the extent;
8) The fsync finishes;
9) Before transaction N is committed, a power failure happens. After
replaying the log, the 4K extent of inode I will be missing, since
it was not logged due to the race with try_release_extent_mapping().
So fix this by teaching try_release_extent_mapping() to not remove an
extent map if it's still in the list of modified extents.
Fixes: ff44c6e36d ("Btrfs: do not hold the write_lock on the extent tree while logging")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we're (re)mounting a btrfs filesystem we set the
BTRFS_FS_STATE_REMOUNTING state in fs_info to serialize against async
reclaim or defrags.
This flag is set in btrfs_remount_prepare() called by btrfs_remount().
As btrfs_remount_prepare() does nothing but setting this flag and
doesn't have a second caller, we can just open-code the flag setting in
btrfs_remount().
Similarly do for so clearing of the flag by moving it out of
btrfs_remount_cleanup() into btrfs_remount() to be symmetrical.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously we depended on some weird behavior in our chunk allocator to
force the allocation of new stripes, so by the time we got to doing the
reduce we would usually already have a chunk with the proper target.
However that behavior causes other problems and needs to be removed.
First however we need to remove this check to only restripe if we
already have those available profiles, because if we're allocating our
first chunk it obviously will not be available. Simply use the target
as specified, and if that fails it'll be because we're out of space.
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs/061 has been failing consistently for me recently with a
transaction abort. We run out of space in the system chunk array, which
means we've allocated way too many system chunks than we need.
Chris added this a long time ago for balance as a poor mans restriping.
If you had a single disk and then added another disk and then did a
balance, update_block_group_flags would then figure out which RAID level
you needed.
Fast forward to today and we have restriping behavior, so we can
explicitly tell the fs that we're trying to change the raid level. This
is accomplished through the normal get_alloc_profile path.
Furthermore this code actually causes btrfs/061 to fail, because we do
things like mkfs -m dup -d single with multiple devices. This trips
this check
alloc_flags = update_block_group_flags(fs_info, cache->flags);
if (alloc_flags != cache->flags) {
ret = btrfs_chunk_alloc(trans, alloc_flags, CHUNK_ALLOC_FORCE);
in btrfs_inc_block_group_ro. Because we're balancing and scrubbing, but
not actually restriping, we keep forcing chunk allocation of RAID1
chunks. This eventually causes us to run out of system space and the
file system aborts and flips read only.
We don't need this poor mans restriping any more, simply use the normal
get_alloc_profile helper, which will get the correct alloc_flags and
thus make the right decision for chunk allocation. This keeps us from
allocating a billion system chunks and falling over.
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are currently getting this lockdep splat in btrfs/161:
======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc5+ #20 Tainted: G E
------------------------------------------------------
mount/678048 is trying to acquire lock:
ffff9b769f15b6e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: clone_fs_devices+0x4d/0x170 [btrfs]
but task is already holding lock:
ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__mutex_lock+0x8b/0x8f0
btrfs_init_new_device+0x2d2/0x1240 [btrfs]
btrfs_ioctl+0x1de/0x2d20 [btrfs]
ksys_ioctl+0x87/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__lock_acquire+0x1240/0x2460
lock_acquire+0xab/0x360
__mutex_lock+0x8b/0x8f0
clone_fs_devices+0x4d/0x170 [btrfs]
btrfs_read_chunk_tree+0x330/0x800 [btrfs]
open_ctree+0xb7c/0x18ce [btrfs]
btrfs_mount_root.cold+0x13/0xfa [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x7de/0xb30
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->chunk_mutex);
lock(&fs_devs->device_list_mutex);
lock(&fs_info->chunk_mutex);
lock(&fs_devs->device_list_mutex);
*** DEADLOCK ***
3 locks held by mount/678048:
#0: ffff9b75ff5fb0e0 (&type->s_umount_key#63/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380
#1: ffffffffc0c2fbc8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x54/0x800 [btrfs]
#2: ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]
stack backtrace:
CPU: 2 PID: 678048 Comm: mount Tainted: G E 5.8.0-rc5+ #20
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
Call Trace:
dump_stack+0x96/0xd0
check_noncircular+0x162/0x180
__lock_acquire+0x1240/0x2460
? asm_sysvec_apic_timer_interrupt+0x12/0x20
lock_acquire+0xab/0x360
? clone_fs_devices+0x4d/0x170 [btrfs]
__mutex_lock+0x8b/0x8f0
? clone_fs_devices+0x4d/0x170 [btrfs]
? rcu_read_lock_sched_held+0x52/0x60
? cpumask_next+0x16/0x20
? module_assert_mutex_or_preempt+0x14/0x40
? __module_address+0x28/0xf0
? clone_fs_devices+0x4d/0x170 [btrfs]
? static_obj+0x4f/0x60
? lockdep_init_map_waits+0x43/0x200
? clone_fs_devices+0x4d/0x170 [btrfs]
clone_fs_devices+0x4d/0x170 [btrfs]
btrfs_read_chunk_tree+0x330/0x800 [btrfs]
open_ctree+0xb7c/0x18ce [btrfs]
? super_setup_bdi_name+0x79/0xd0
btrfs_mount_root.cold+0x13/0xfa [btrfs]
? vfs_parse_fs_string+0x84/0xb0
? rcu_read_lock_sched_held+0x52/0x60
? kfree+0x2b5/0x310
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
? cred_has_capability+0x7c/0x120
? rcu_read_lock_sched_held+0x52/0x60
? legacy_get_tree+0x30/0x50
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x7de/0xb30
? memdup_user+0x4e/0x90
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This is because btrfs_read_chunk_tree() can come upon DEV_EXTENT's and
then read the device, which takes the device_list_mutex. The
device_list_mutex needs to be taken before the chunk_mutex, so this is a
problem. We only really need the chunk mutex around adding the chunk,
so move the mutex around read_one_chunk.
An argument could be made that we don't even need the chunk_mutex here
as it's during mount, and we are protected by various other locks.
However we already have special rules for ->device_list_mutex, and I'd
rather not have another special case for ->chunk_mutex.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's long existed a lockdep splat because we open our bdev's under
the ->device_list_mutex at mount time, which acquires the bd_mutex.
Usually this goes unnoticed, but if you do loopback devices at all
suddenly the bd_mutex comes with a whole host of other dependencies,
which results in the splat when you mount a btrfs file system.
======================================================
WARNING: possible circular locking dependency detected
5.8.0-0.rc3.1.fc33.x86_64+debug #1 Not tainted
------------------------------------------------------
systemd-journal/509 is trying to acquire lock:
ffff970831f84db0 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x44/0x70 [btrfs]
but task is already holding lock:
ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (sb_pagefaults){.+.+}-{0:0}:
__sb_start_write+0x13e/0x220
btrfs_page_mkwrite+0x59/0x560 [btrfs]
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
asm_exc_page_fault+0x1e/0x30
-> #5 (&mm->mmap_lock#2){++++}-{3:3}:
__might_fault+0x60/0x80
_copy_from_user+0x20/0xb0
get_sg_io_hdr+0x9a/0xb0
scsi_cmd_ioctl+0x1ea/0x2f0
cdrom_ioctl+0x3c/0x12b4
sr_block_ioctl+0xa4/0xd0
block_ioctl+0x3f/0x50
ksys_ioctl+0x82/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #4 (&cd->lock){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
sr_block_open+0xa2/0x180
__blkdev_get+0xdd/0x550
blkdev_get+0x38/0x150
do_dentry_open+0x16b/0x3e0
path_openat+0x3c9/0xa00
do_filp_open+0x75/0x100
do_sys_openat2+0x8a/0x140
__x64_sys_openat+0x46/0x70
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #3 (&bdev->bd_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
__blkdev_get+0x6a/0x550
blkdev_get+0x85/0x150
blkdev_get_by_path+0x2c/0x70
btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs]
open_fs_devices+0x88/0x240 [btrfs]
btrfs_open_devices+0x92/0xa0 [btrfs]
btrfs_mount_root+0x250/0x490 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x119/0x380 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x8c6/0xca0
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
btrfs_run_dev_stats+0x36/0x420 [btrfs]
commit_cowonly_roots+0x91/0x2d0 [btrfs]
btrfs_commit_transaction+0x4e6/0x9f0 [btrfs]
btrfs_sync_file+0x38a/0x480 [btrfs]
__x64_sys_fdatasync+0x47/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
btrfs_commit_transaction+0x48e/0x9f0 [btrfs]
btrfs_sync_file+0x38a/0x480 [btrfs]
__x64_sys_fdatasync+0x47/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}:
__lock_acquire+0x1241/0x20c0
lock_acquire+0xb0/0x400
__mutex_lock+0x7b/0x820
btrfs_record_root_in_trans+0x44/0x70 [btrfs]
start_transaction+0xd2/0x500 [btrfs]
btrfs_dirty_inode+0x44/0xd0 [btrfs]
file_update_time+0xc6/0x120
btrfs_page_mkwrite+0xda/0x560 [btrfs]
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
asm_exc_page_fault+0x1e/0x30
other info that might help us debug this:
Chain exists of:
&fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sb_pagefaults);
lock(&mm->mmap_lock#2);
lock(sb_pagefaults);
lock(&fs_info->reloc_mutex);
*** DEADLOCK ***
3 locks held by systemd-journal/509:
#0: ffff97083bdec8b8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x12e/0x4b0
#1: ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
#2: ffff97083144d6a8 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3f8/0x500 [btrfs]
stack backtrace:
CPU: 0 PID: 509 Comm: systemd-journal Not tainted 5.8.0-0.rc3.1.fc33.x86_64+debug #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack+0x92/0xc8
check_noncircular+0x134/0x150
__lock_acquire+0x1241/0x20c0
lock_acquire+0xb0/0x400
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
? lock_acquire+0xb0/0x400
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
__mutex_lock+0x7b/0x820
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
? kvm_sched_clock_read+0x14/0x30
? sched_clock+0x5/0x10
? sched_clock_cpu+0xc/0xb0
btrfs_record_root_in_trans+0x44/0x70 [btrfs]
start_transaction+0xd2/0x500 [btrfs]
btrfs_dirty_inode+0x44/0xd0 [btrfs]
file_update_time+0xc6/0x120
btrfs_page_mkwrite+0xda/0x560 [btrfs]
? sched_clock+0x5/0x10
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7fa3972fdbfe
Code: Bad RIP value.
Fix this by not holding the ->device_list_mutex at this point. The
device_list_mutex exists to protect us from modifying the device list
while the file system is running.
However it can also be modified by doing a scan on a device. But this
action is specifically protected by the uuid_mutex, which we are holding
here. We cannot race with opening at this point because we have the
->s_mount lock held during the mount. Not having the
->device_list_mutex here is perfectly safe as we're not going to change
the devices at this point.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add some comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Eric reported seeing this message while running generic/475
BTRFS: error (device dm-3) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted
Full stack trace:
BTRFS: error (device dm-0) in btrfs_commit_transaction:2323: errno=-5 IO failure (Error while writing out transaction)
BTRFS info (device dm-0): forced readonly
BTRFS warning (device dm-0): Skipping commit of aborted transaction.
------------[ cut here ]------------
BTRFS: error (device dm-0) in cleanup_transaction:1894: errno=-5 IO failure
BTRFS: Transaction aborted (error -117)
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6480 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6488 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6490 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6498 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64c0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85e8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85f0 len 4096 err no 10
WARNING: CPU: 3 PID: 23985 at fs/btrfs/tree-log.c:3084 btrfs_sync_log+0xbc8/0xd60 [btrfs]
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4288 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4290 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4298 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42d0 len 4096 err no 10
CPU: 3 PID: 23985 Comm: fsstress Tainted: G W L 5.8.0-rc4-default+ #1181
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
RIP: 0010:btrfs_sync_log+0xbc8/0xd60 [btrfs]
RSP: 0018:ffff909a44d17bd0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001
RDX: ffff8f3be41cb940 RSI: ffffffffb0108d2b RDI: ffffffffb0108ff7
RBP: ffff909a44d17e70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000037988 R12: ffff8f3bd20e4000
R13: ffff8f3bd20e4428 R14: 00000000ffffff8b R15: ffff909a44d17c70
FS: 00007f6a6ed3fb80(0000) GS:ffff8f3c3dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6a6ed3e000 CR3: 00000000525c0003 CR4: 0000000000160ee0
Call Trace:
? finish_wait+0x90/0x90
? __mutex_unlock_slowpath+0x45/0x2a0
? lock_acquire+0xa3/0x440
? lockref_put_or_lock+0x9/0x30
? dput+0x20/0x4a0
? dput+0x20/0x4a0
? do_raw_spin_unlock+0x4b/0xc0
? _raw_spin_unlock+0x1f/0x30
btrfs_sync_file+0x335/0x490 [btrfs]
do_fsync+0x38/0x70
__x64_sys_fsync+0x10/0x20
do_syscall_64+0x50/0xe0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f6a6ef1b6e3
Code: Bad RIP value.
RSP: 002b:00007ffd01e20038 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
RAX: ffffffffffffffda RBX: 000000000007a120 RCX: 00007f6a6ef1b6e3
RDX: 00007ffd01e1ffa0 RSI: 00007ffd01e1ffa0 RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000001 R09: 00007ffd01e2004c
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000009f
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffffffb007fe0b>] copy_process+0x67b/0x1b00
softirqs last enabled at (0): [<ffffffffb007fe0b>] copy_process+0x67b/0x1b00
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace af146e0e38433456 ]---
BTRFS: error (device dm-0) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted
This ret came from btrfs_write_marked_extents(). If we get an aborted
transaction via EIO before, we'll see it in btree_write_cache_pages()
and return EUCLEAN, which gets printed as "Filesystem corrupted".
Except we shouldn't be returning EUCLEAN here, we need to be returning
EROFS because EUCLEAN is reserved for actual corruption, not IO errors.
We are inconsistent about our handling of BTRFS_FS_STATE_ERROR
elsewhere, but we want to use EROFS for this particular case. The
original transaction abort has the real error code for why we ended up
with an aborted transaction, all subsequent actions just need to return
EROFS because they may not have a trans handle and have no idea about
the original cause of the abort.
After patch "btrfs: don't WARN if we abort a transaction with EROFS" the
stacktrace will not be dumped either.
Reported-by: Eric Sandeen <esandeen@redhat.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add full test stacktrace ]
Signed-off-by: David Sterba <dsterba@suse.com>
We've had some discussions about what to do in certain scenarios for
error codes, specifically EUCLEAN and EROFS. Document these near the
error handling code so its clear what their intentions are.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we got some sort of corruption via a read and call
btrfs_handle_fs_error() we'll set BTRFS_FS_STATE_ERROR on the fs and
complain. If a subsequent trans handle trips over this it'll get EROFS
and then abort. However at that point we're not aborting for the
original reason, we're aborting because we've been flipped read only.
We do not need to WARN_ON() here.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The possibility of extents being shared (through clone and deduplication
operations) requires special care when logging data checksums, to avoid
having a log tree with different checksum items that cover ranges which
overlap (which resulted in missing checksums after replaying a log tree).
Such problems were fixed in the past by the following commits:
commit 40e046acbd ("Btrfs: fix missing data checksums after replaying a
log tree")
commit e289f03ea7 ("btrfs: fix corrupt log due to concurrent fsync of
inodes with shared extents")
Test case generic/588 exercises the scenario solved by the first commit
(purely sequential and deterministic) while test case generic/457 often
triggered the case fixed by the second commit (not deterministic, requires
specific timings under concurrency).
The problems were addressed by deleting, from the log tree, any existing
checksums before logging the new ones. And also by doing the deletion and
logging of the cheksums while locking the checksum range in an extent io
tree (root->log_csum_range), to deal with the case where we have concurrent
fsyncs against files with shared extents.
That however causes more contention on the leaves of a log tree where we
store checksums (and all the nodes in the paths leading to them), even
when we do not have shared extents, or all the shared extents were created
by past transactions. It also adds a bit of contention on the spin lock of
the log_csums_range extent io tree of the log root.
This change adds a 'last_reflink_trans' field to the inode to keep track
of the last transaction where a new extent was shared between inodes
(through clone and deduplication operations). It is updated for both the
source and destination inodes of reflink operations whenever a new extent
(created in the current transaction) becomes shared by the inodes. This
field is kept in memory only, not persisted in the inode item, similar
to other existing fields (last_unlink_trans, logged_trans).
When logging checksums for an extent, if the value of 'last_reflink_trans'
is smaller then the current transaction's generation/id, we skip locking
the extent range and deletion of checksums from the log tree, since we
know we do not have new shared extents. This reduces contention on the
log tree's leaves where checksums are stored.
The following script, which uses fio, was used to measure the impact of
this change:
$ cat test-fsync.sh
#!/bin/bash
DEV=/dev/sdk
MNT=/mnt/sdk
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-d single -m single"
if [ $# -ne 3 ]; then
echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ"
exit 1
fi
NUM_JOBS=$1
FILE_SIZE=$2
FSYNC_FREQ=$3
cat <<EOF > /tmp/fio-job.ini
[writers]
rw=write
fsync=$FSYNC_FREQ
fallocate=none
group_reporting=1
direct=0
bs=64k
ioengine=sync
size=$FILE_SIZE
directory=$MNT
numjobs=$NUM_JOBS
EOF
echo "Using config:"
echo
cat /tmp/fio-job.ini
echo
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
The tests were performed for different numbers of jobs, file sizes and
fsync frequency. A qemu VM using kvm was used, with 8 cores (the host has
12 cores, with cpu governance set to performance mode on all cores), 16GiB
of ram (the host has 64GiB) and using a NVMe device directly (without an
intermediary filesystem in the host). While running the tests, the host
was not used for anything else, to avoid disturbing the tests.
The obtained results were the following (the last line of fio's output was
pasted). Starting with 16 jobs is where a significant difference is
observable in this particular setup and hardware (differences highlighted
below). The very small differences for tests with less than 16 jobs are
possibly just noise and random.
**** 1 job, file size 1G, fsync frequency 1 ****
before this change:
WRITE: bw=23.8MiB/s (24.9MB/s), 23.8MiB/s-23.8MiB/s (24.9MB/s-24.9MB/s), io=1024MiB (1074MB), run=43075-43075msec
after this change:
WRITE: bw=24.4MiB/s (25.6MB/s), 24.4MiB/s-24.4MiB/s (25.6MB/s-25.6MB/s), io=1024MiB (1074MB), run=41938-41938msec
**** 2 jobs, file size 1G, fsync frequency 1 ****
before this change:
WRITE: bw=37.7MiB/s (39.5MB/s), 37.7MiB/s-37.7MiB/s (39.5MB/s-39.5MB/s), io=2048MiB (2147MB), run=54351-54351msec
after this change:
WRITE: bw=37.7MiB/s (39.5MB/s), 37.6MiB/s-37.6MiB/s (39.5MB/s-39.5MB/s), io=2048MiB (2147MB), run=54428-54428msec
**** 4 jobs, file size 1G, fsync frequency 1 ****
before this change:
WRITE: bw=67.5MiB/s (70.8MB/s), 67.5MiB/s-67.5MiB/s (70.8MB/s-70.8MB/s), io=4096MiB (4295MB), run=60669-60669msec
after this change:
WRITE: bw=68.6MiB/s (71.0MB/s), 68.6MiB/s-68.6MiB/s (71.0MB/s-71.0MB/s), io=4096MiB (4295MB), run=59678-59678msec
**** 8 jobs, file size 1G, fsync frequency 1 ****
before this change:
WRITE: bw=128MiB/s (134MB/s), 128MiB/s-128MiB/s (134MB/s-134MB/s), io=8192MiB (8590MB), run=64048-64048msec
after this change:
WRITE: bw=129MiB/s (135MB/s), 129MiB/s-129MiB/s (135MB/s-135MB/s), io=8192MiB (8590MB), run=63405-63405msec
**** 16 jobs, file size 1G, fsync frequency 1 ****
before this change:
WRITE: bw=78.5MiB/s (82.3MB/s), 78.5MiB/s-78.5MiB/s (82.3MB/s-82.3MB/s), io=16.0GiB (17.2GB), run=208676-208676msec
after this change:
WRITE: bw=110MiB/s (115MB/s), 110MiB/s-110MiB/s (115MB/s-115MB/s), io=16.0GiB (17.2GB), run=149295-149295msec
(+40.1% throughput, -28.5% runtime)
**** 32 jobs, file size 1G, fsync frequency 1 ****
before this change:
WRITE: bw=58.8MiB/s (61.7MB/s), 58.8MiB/s-58.8MiB/s (61.7MB/s-61.7MB/s), io=32.0GiB (34.4GB), run=557134-557134msec
after this change:
WRITE: bw=76.1MiB/s (79.8MB/s), 76.1MiB/s-76.1MiB/s (79.8MB/s-79.8MB/s), io=32.0GiB (34.4GB), run=430550-430550msec
(+29.4% throughput, -22.7% runtime)
**** 64 jobs, file size 512M, fsync frequency 1 ****
before this change:
WRITE: bw=65.8MiB/s (68.0MB/s), 65.8MiB/s-65.8MiB/s (68.0MB/s-68.0MB/s), io=32.0GiB (34.4GB), run=498055-498055msec
after this change:
WRITE: bw=85.1MiB/s (89.2MB/s), 85.1MiB/s-85.1MiB/s (89.2MB/s-89.2MB/s), io=32.0GiB (34.4GB), run=385116-385116msec
(+29.3% throughput, -22.7% runtime)
**** 128 jobs, file size 256M, fsync frequency 1 ****
before this change:
WRITE: bw=54.7MiB/s (57.3MB/s), 54.7MiB/s-54.7MiB/s (57.3MB/s-57.3MB/s), io=32.0GiB (34.4GB), run=599373-599373msec
after this change:
WRITE: bw=121MiB/s (126MB/s), 121MiB/s-121MiB/s (126MB/s-126MB/s), io=32.0GiB (34.4GB), run=271907-271907msec
(+121.2% throughput, -54.6% runtime)
**** 256 jobs, file size 256M, fsync frequency 1 ****
before this change:
WRITE: bw=69.2MiB/s (72.5MB/s), 69.2MiB/s-69.2MiB/s (72.5MB/s-72.5MB/s), io=64.0GiB (68.7GB), run=947536-947536msec
after this change:
WRITE: bw=121MiB/s (127MB/s), 121MiB/s-121MiB/s (127MB/s-127MB/s), io=64.0GiB (68.7GB), run=541916-541916msec
(+74.9% throughput, -42.8% runtime)
**** 512 jobs, file size 128M, fsync frequency 1 ****
before this change:
WRITE: bw=85.4MiB/s (89.5MB/s), 85.4MiB/s-85.4MiB/s (89.5MB/s-89.5MB/s), io=64.0GiB (68.7GB), run=767734-767734msec
after this change:
WRITE: bw=141MiB/s (147MB/s), 141MiB/s-141MiB/s (147MB/s-147MB/s), io=64.0GiB (68.7GB), run=466022-466022msec
(+65.1% throughput, -39.3% runtime)
**** 1024 jobs, file size 128M, fsync frequency 1 ****
before this change:
WRITE: bw=115MiB/s (120MB/s), 115MiB/s-115MiB/s (120MB/s-120MB/s), io=128GiB (137GB), run=1143775-1143775msec
after this change:
WRITE: bw=171MiB/s (180MB/s), 171MiB/s-171MiB/s (180MB/s-180MB/s), io=128GiB (137GB), run=764843-764843msec
(+48.7% throughput, -33.1% runtime)
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since there is not common cleanup run after the label it makes it
somewhat redundant.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This enum is the interface exposed to developers.
Although we have a detailed comment explaining the whole idea of space
flushing at the beginning of space-info.c, the exposed enum interface
doesn't have any comment.
Some corner cases, like BTRFS_RESERVE_FLUSH_ALL and
BTRFS_RESERVE_FLUSH_ALL_STEAL can be interrupted by fatal signals, are
not explained at all.
So add some simple comments for these enums as a quick reference.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since most metadata reservation calls can return -EINTR when get
interrupted by fatal signal, we need to review the all the metadata
reservation call sites.
In relocation code, the metadata reservation happens in the following
sites:
- btrfs_block_rsv_refill() in merge_reloc_root()
merge_reloc_root() is a pretty critical section, we don't want to be
interrupted by signal, so change the flush status to
BTRFS_RESERVE_FLUSH_LIMIT, so it won't get interrupted by signal.
Since such change can be ENPSPC-prone, also shrink the amount of
metadata to reserve least amount avoid deadly ENOSPC there.
- btrfs_block_rsv_refill() in reserve_metadata_space()
It calls with BTRFS_RESERVE_FLUSH_LIMIT, which won't get interrupted
by signal.
- btrfs_block_rsv_refill() in prepare_to_relocate()
- btrfs_block_rsv_add() in prepare_to_relocate()
- btrfs_block_rsv_refill() in relocate_block_group()
- btrfs_delalloc_reserve_metadata() in relocate_file_extent_cluster()
- btrfs_start_transaction() in relocate_block_group()
- btrfs_start_transaction() in create_reloc_inode()
Can be interrupted by fatal signal and we can handle it easily.
For these call sites, just catch the -EINTR value in btrfs_balance()
and count them as canceled.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a bug report about bad signal timing could lead to read-only
fs during balance:
BTRFS info (device xvdb): balance: start -d -m -s
BTRFS info (device xvdb): relocating block group 73001861120 flags metadata
BTRFS info (device xvdb): found 12236 extents, stage: move data extents
BTRFS info (device xvdb): relocating block group 71928119296 flags data
BTRFS info (device xvdb): found 3 extents, stage: move data extents
BTRFS info (device xvdb): found 3 extents, stage: update data pointers
BTRFS info (device xvdb): relocating block group 60922265600 flags metadata
BTRFS: error (device xvdb) in btrfs_drop_snapshot:5505: errno=-4 unknown
BTRFS info (device xvdb): forced readonly
BTRFS info (device xvdb): balance: ended with status: -4
[CAUSE]
The direct cause is the -EINTR from the following call chain when a
fatal signal is pending:
relocate_block_group()
|- clean_dirty_subvols()
|- btrfs_drop_snapshot()
|- btrfs_start_transaction()
|- btrfs_delayed_refs_rsv_refill()
|- btrfs_reserve_metadata_bytes()
|- __reserve_metadata_bytes()
|- wait_reserve_ticket()
|- prepare_to_wait_event();
|- ticket->error = -EINTR;
Normally this behavior is fine for most btrfs_start_transaction()
callers, as they need to catch any other error, same for the signal, and
exit ASAP.
However for balance, especially for the clean_dirty_subvols() case, we're
already doing cleanup works, getting -EINTR from btrfs_drop_snapshot()
could cause a lot of unexpected problems.
From the mentioned forced read-only report, to later balance error due
to half dropped reloc trees.
[FIX]
Fix this problem by using btrfs_join_transaction() if
btrfs_drop_snapshot() is called from relocation context.
Since btrfs_join_transaction() won't get interrupted by signal, we can
continue the cleanup.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>3
Signed-off-by: David Sterba <dsterba@suse.com>
Although btrfs balance can be canceled with "btrfs balance cancel"
command, it's still almost muscle memory to press Ctrl-C to cancel a
long running btrfs balance.
So allow btrfs balance to check signal to determine if it should exit.
The cancellation points are in known location and we're only adding one
more reason, so this should be safe.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no cleanup that occurs so we can simply return 0 directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
User Forza reported on IRC that some invalid combinations of file
attributes are accepted by chattr.
The NODATACOW and compression file flags/attributes are mutually
exclusive, but they could be set by 'chattr +c +C' on an empty file. The
nodatacow will be in effect because it's checked first in
btrfs_run_delalloc_range.
Extend the flag validation to catch the following cases:
- input flags are conflicting
- old and new flags are conflicting
- initialize the local variable with inode flags after inode ls locked
Inode attributes take precedence over mount options and are an
independent setting.
Nocompress would be a no-op with nodatacow, but we don't want to mix
any compression-related options with nodatacow.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
->show_devname currently shows the lowest devid in the list. As the seed
devices have the lowest devid in the sprouted filesystem, the userland
tool such as findmnt end up seeing seed device instead of the device from
the read-writable sprouted filesystem. As shown below.
mount /dev/sda /btrfs
mount: /btrfs: WARNING: device write-protected, mounted read-only.
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111
btrfs dev add -f /dev/sdb /btrfs
umount /btrfs
mount /dev/sdb /btrfs
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111
All sprouts from a single seed will show the same seed device and the
same fsid. That's confusing.
This is causing problems in our prototype as there isn't any reference
to the sprout file-system(s) which is being used for actual read and
write.
This was added in the patch which implemented the show_devname in btrfs
commit 9c5085c147 ("Btrfs: implement ->show_devname").
I tried to look for any particular reason that we need to show the seed
device, there isn't any.
So instead, do not traverse through the seed devices, just show the
lowest devid in the sprouted fsid.
After the patch:
mount /dev/sda /btrfs
mount: /btrfs: WARNING: device write-protected, mounted read-only.
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111
btrfs dev add -f /dev/sdb /btrfs
mount -o rw,remount /dev/sdb /btrfs
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sdb /btrfs 595ca0e6-b82e-46b5-b9e2-c72a6928be48
mount /dev/sda /btrfs1
mount: /btrfs1: WARNING: device write-protected, mounted read-only.
btrfs dev add -f /dev/sdc /btrfs1
findmnt --output SOURCE,TARGET,UUID /btrfs1
SOURCE TARGET UUID
/dev/sdc /btrfs1 ca1dbb7a-8446-4f95-853c-a20f3f82bdbb
cat /proc/self/mounts | grep btrfs
/dev/sdb /btrfs btrfs rw,relatime,noacl,space_cache,subvolid=5,subvol=/ 0 0
/dev/sdc /btrfs1 btrfs ro,relatime,noacl,space_cache,subvolid=5,subvol=/ 0 0
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
CC: stable@vger.kernel.org # 4.19+
Tested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Sometime fsstress could lead to qgroup warning for case like
generic/013:
BTRFS warning (device dm-3): qgroup 0/259 has unreleased space, type 1 rsv 81920
------------[ cut here ]------------
WARNING: CPU: 9 PID: 24535 at fs/btrfs/disk-io.c:4142 close_ctree+0x1dc/0x323 [btrfs]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:close_ctree+0x1dc/0x323 [btrfs]
Call Trace:
btrfs_put_super+0x15/0x17 [btrfs]
generic_shutdown_super+0x72/0x110
kill_anon_super+0x18/0x30
btrfs_kill_super+0x17/0x30 [btrfs]
deactivate_locked_super+0x3b/0xa0
deactivate_super+0x40/0x50
cleanup_mnt+0x135/0x190
__cleanup_mnt+0x12/0x20
task_work_run+0x64/0xb0
__prepare_exit_to_usermode+0x1bc/0x1c0
__syscall_return_slowpath+0x47/0x230
do_syscall_64+0x64/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace 6c341cdf9b6cc3c1 ]---
BTRFS error (device dm-3): qgroup reserved space leaked
While that subvolume 259 is no longer in that filesystem.
[CAUSE]
Normally per-trans qgroup reserved space is freed when a transaction is
committed, in commit_fs_roots().
However for completely dropped subvolume, that subvolume is completely
gone, thus is no longer in the fs_roots_radix, and its per-trans
reserved qgroup will never be freed.
Since the subvolume is already gone, leaked per-trans space won't cause
any trouble for end users.
[FIX]
Just call btrfs_qgroup_free_meta_all_pertrans() before a subvolume is
completely dropped.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
clang static analysis flags this error
fs/btrfs/ref-verify.c:290:3: warning: Potential leak of memory pointed to by 're' [unix.Malloc]
kfree(be);
^~~~~
The problem is in this block of code:
if (root_objectid) {
struct root_entry *exist_re;
exist_re = insert_root_entry(&exist->roots, re);
if (exist_re)
kfree(re);
}
There is no 'else' block freeing when root_objectid is 0. Add the
missing kfree to the else branch.
Fixes: fd708b81d9 ("Btrfs: add a extent ref verify tool")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The whole chunk tree is read at mount time so we can utilize readahead
to get the tree blocks to memory before we read the items. The idea is
from Robbie, but instead of updating search slot readahead, this patch
implements the chunk tree readahead manually from nodes on level 1.
We've decided to do specific readahead optimizations and then unify them
under a common API so we don't break everything by changing the search
slot readahead logic.
Higher chunk trees grow on large filesystems (many terabytes), and
prefetching just level 1 seems to be sufficient. Provided example was
from a 200TiB filesystem with chunk tree level 2.
CC: Robbie Ko <robbieko@synology.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add retrieval of the filesystem's metadata UUID to the fsinfo ioctl.
This is driven by setting the BTRFS_FS_INFO_FLAG_METADATA_UUID flag in
btrfs_ioctl_fs_info_args::flags.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add retrieval of the filesystem's generation to the fsinfo ioctl. This is
driven by setting the BTRFS_FS_INFO_FLAG_GENERATION flag in
btrfs_ioctl_fs_info_args::flags.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the recent addition of filesystem checksum types other than CRC32c,
it is not anymore hard-coded which checksum type a btrfs filesystem uses.
Up to now there is no good way to read the filesystem checksum, apart from
reading the filesystem UUID and then query sysfs for the checksum type.
Add a new csum_type and csum_size fields to the BTRFS_IOC_FS_INFO ioctl
command which usually is used to query filesystem features. Also add a
flags member indicating that the kernel responded with a set csum_type and
csum_size field.
For compatibility reasons, only return the csum_type and csum_size if
the BTRFS_FS_INFO_FLAG_CSUM_INFO flag was passed to the kernel. Also
clear any unknown flags so we don't pass false positives to user-space
newer than the kernel.
To simplify further additions to the ioctl, also switch the padding to a
u8 array. Pahole was used to verify the result of this switch:
The csum members are added before flags, which might look odd, but this
is to keep the alignment requirements and not to introduce holes in the
structure.
$ pahole -C btrfs_ioctl_fs_info_args fs/btrfs/btrfs.ko
struct btrfs_ioctl_fs_info_args {
__u64 max_id; /* 0 8 */
__u64 num_devices; /* 8 8 */
__u8 fsid[16]; /* 16 16 */
__u32 nodesize; /* 32 4 */
__u32 sectorsize; /* 36 4 */
__u32 clone_alignment; /* 40 4 */
__u16 csum_type; /* 44 2 */
__u16 csum_size; /* 46 2 */
__u64 flags; /* 48 8 */
__u8 reserved[968]; /* 56 968 */
/* size: 1024, cachelines: 16, members: 10 */
};
Fixes: 3951e7f050 ("btrfs: add xxhash64 to checksumming algorithms")
Fixes: 3831bf0094 ("btrfs: add sha256 to checksumming algorithm")
CC: stable@vger.kernel.org # 5.5+
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
commit a514d63882 ("btrfs: qgroup: Commit transaction in advance to
reduce early EDQUOT") tries to reduce the early EDQUOT problems by
checking the qgroup free against threshold and tries to wake up commit
kthread to free some space.
The problem of that mechanism is, it can only free qgroup per-trans
metadata space, can't do anything to data, nor prealloc qgroup space.
Now since we have the ability to flush qgroup space, and implemented
retry-after-EDQUOT behavior, such mechanism can be completely replaced.
So this patch will cleanup such mechanism in favor of
retry-after-EDQUOT.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
There are known problem related to how btrfs handles qgroup reserved
space. One of the most obvious case is the the test case btrfs/153,
which do fallocate, then write into the preallocated range.
btrfs/153 1s ... - output mismatch (see xfstests-dev/results//btrfs/153.out.bad)
--- tests/btrfs/153.out 2019-10-22 15:18:14.068965341 +0800
+++ xfstests-dev/results//btrfs/153.out.bad 2020-07-01 20:24:40.730000089 +0800
@@ -1,2 +1,5 @@
QA output created by 153
+pwrite: Disk quota exceeded
+/mnt/scratch/testfile2: Disk quota exceeded
+/mnt/scratch/testfile2: Disk quota exceeded
Silence is golden
...
(Run 'diff -u xfstests-dev/tests/btrfs/153.out xfstests-dev/results//btrfs/153.out.bad' to see the entire diff)
[CAUSE]
Since commit c6887cd111 ("Btrfs: don't do nocow check unless we have to"),
we always reserve space no matter if it's COW or not.
Such behavior change is mostly for performance, and reverting it is not
a good idea anyway.
For preallcoated extent, we reserve qgroup data space for it already,
and since we also reserve data space for qgroup at buffered write time,
it needs twice the space for us to write into preallocated space.
This leads to the -EDQUOT in buffered write routine.
And we can't follow the same solution, unlike data/meta space check,
qgroup reserved space is shared between data/metadata.
The EDQUOT can happen at the metadata reservation, so doing NODATACOW
check after qgroup reservation failure is not a solution.
[FIX]
To solve the problem, we don't return -EDQUOT directly, but every time
we got a -EDQUOT, we try to flush qgroup space:
- Flush all inodes of the root
NODATACOW writes will free the qgroup reserved at run_dealloc_range().
However we don't have the infrastructure to only flush NODATACOW
inodes, here we flush all inodes anyway.
- Wait for ordered extents
This would convert the preallocated metadata space into per-trans
metadata, which can be freed in later transaction commit.
- Commit transaction
This will free all per-trans metadata space.
Also we don't want to trigger flush multiple times, so here we introduce
a per-root wait list and a new root status, to ensure only one thread
starts the flushing.
Fixes: c6887cd111 ("Btrfs: don't do nocow check unless we have to")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
Before this patch, when btrfs_qgroup_reserve_data() fails, we free all
reserved space of the changeset.
For example:
ret = btrfs_qgroup_reserve_data(inode, changeset, 0, SZ_1M);
ret = btrfs_qgroup_reserve_data(inode, changeset, SZ_1M, SZ_1M);
ret = btrfs_qgroup_reserve_data(inode, changeset, SZ_2M, SZ_1M);
If the last btrfs_qgroup_reserve_data() failed, it will release the
entire [0, 3M) range.
This behavior is kind of OK for now, as when we hit -EDQUOT, we normally
go error handling and need to release all reserved ranges anyway.
But this also means the following call is not possible:
ret = btrfs_qgroup_reserve_data();
if (ret == -EDQUOT) {
/* Do something to free some qgroup space */
ret = btrfs_qgroup_reserve_data();
}
As if the first btrfs_qgroup_reserve_data() fails, it will free all
reserved qgroup space.
[CAUSE]
This is because we release all reserved ranges when
btrfs_qgroup_reserve_data() fails.
[FIX]
This patch will implement a new function, qgroup_unreserve_range(), to
iterate through the ulist nodes, to find any nodes in the failure range,
and remove the EXTENT_QGROUP_RESERVED bits from the io_tree, and
decrease the extent_changeset::bytes_changed, so that we can revert to
previous state.
This allows later patches to retry btrfs_qgroup_reserve_data() if EDQUOT
happens.
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have refcount_t now with the associated library to handle refcounts,
which gives us extra debugging around reference count mistakes that may
be made. For example it'll warn on any transition from 0->1 or 0->-1,
which is handy for noticing cases where we've messed up reference
counting. Convert the block group ref counting from an atomic_t to
refcount_t and use the appropriate helpers.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Multi-statement macros should be enclosed in do/while(0) block to make
their use safe in single statement if conditions. All current uses of
the macros are safe, so this change is for future protection.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While at it use the opportunity to simplify find_logical_bio_stripe by
reducing the scope of 'stripe_start' variable and squash the
sector-to-bytes conversion on one line.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unify the style in the file such that return value of bio_list_pop is
assigned directly in the while loop. This is in line with the rest of
the kernel.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The merging logic is always executed if the current stripe's device
is not missing. So there's no point in duplicating the check. Simply
remove it, while at it reduce the scope of the 'last_end' variable.
If the current stripe's device is missing we fail the stripe early on.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since btrfs_bio always contains the extra space for the tgtdev_map and
raid_maps it's pointless to make the assignment iff specific conditions
are met.
Instead, always assign the pointers to their correct value at allocation
time. To accommodate this change also move code a bit in
__btrfs_map_block so that btrfs_bio::stripes array is always initialized
before the raid_map, subsequently move the call to sort_parity_stripes
in the 'if' building the raid_map, retaining the old behavior.
To better understand the change, there are 2 aspects to this:
1. The original code is harder to grasp because the calculations for
initializing raid_map/tgtdev ponters are apart from the initial
allocation of memory. Having them predicated on 2 separate checks
doesn't help that either... So by moving the initialisation in
alloc_btrfs_bio puts everything together.
2. tgtdev/raid_maps are now always initialized despite sometimes they
might be equal i.e __btrfs_map_block_for_discard calls
alloc_btrfs_bio with tgtdev = 0 but their usage should be predicated
on external checks i.e. just because those pointers are non-null
doesn't mean they are valid per-se. And actually while taking another
look at __btrfs_map_block I saw a discrepancy:
Original code initialised tgtdev_map if the following check is true:
if (dev_replace_is_ongoing && dev_replace->tgtdev != NULL)
However, further down tgtdev_map is only used if the following check
is true:
if (dev_replace_is_ongoing && dev_replace->tgtdev != NULL && need_full_stripe(op))
e.g. the additional need_full_stripe(op) predicate is there.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy more details from mail discussion ]
Signed-off-by: David Sterba <dsterba@suse.com>
Since BTRFS uses a private bdi it makes sense to create a link to this
bdi under /sys/fs/btrfs/<UUID>/bdi. This allows size of read ahead to
be controlled. Without this patch it's not possible to uniquely identify
which bdi pertains to which btrfs filesystem in the case of multiple
btrfs filesystems.
It's fine to simply call sysfs_remove_link without checking if the
link indeed has been created. The call path
sysfs_remove_link
kernfs_remove_by_name
kernfs_remove_by_name_ns
will simply return -ENOENT in case it doesn't exist.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a compressed read fails due to checksum error only a line is printed
to dmesg, device corrupt counter is not modified.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
compressed_bio::orig_bio is always set in btrfs_submit_compressed_read
before any bio submission is performed. Since that function is always
called with a valid bio it renders the ASSERT unnecessary.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_io_bio have access to btrfs_device we can safely
increment the device corruption counter on error. There is one notable
exception - repair bios for raid. Since those don't go through the
normal submit_stripe_bio callpath but through raid56_parity_recover thus
repair bios won't have their device set.
Scrub increments the corruption counter for checksum mismatch as well
but does not call this function.
Link: https://lore.kernel.org/linux-btrfs/4857863.FCrPRfMyHP@liv/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_map_bio ensures that all submitted bios to devices have valid
btrfs_device::bdev so this check can be removed from btrfs_end_bio. This
check was added in june 2012 597a60fade ("Btrfs: don't count I/O
statistic read errors for missing devices") but then in October of the
same year another commit de1ee92ac3 ("Btrfs: recheck bio against
block device when we map the bio") started checking for the presence of
btrfs_device::bdev before actually issuing the bio.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of recording stripe_index and using that to access correct
btrfs_device from btrfs_bio::stripes record the btrfs_device in
btrfs_io_bio. This will enable endio handlers to increment device
error counters on checksum errors.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make the function directly return a pointer to a failure record and
adjust callers to handle it. Also refactor the logic inside so that
the case which allocates the failure record for the first time is not
handled in an 'if' arm, saving us a level of indentation. Finally make
the function static as it's not used outside of extent_io.c .
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Only failure that get_state_failrec can get is if there is no failure
for the given address. There is no reason why the function should return
a status code and use a separate parameter for returning the actual
failure rec (if one is found). Simplify it by making the return type
a pointer and return ERR_PTR value in case of errors.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The option subvolrootid used to be a workaround for mounting subvolumes
and ineffective since 5e2a4b25da ("btrfs: deprecate subvolrootid mount
option"). We have subvol= that works and we don't need to keep the
cruft, let's remove it.
Signed-off-by: David Sterba <dsterba@suse.com>
The mount option alloc_start has no effect since 0d0c71b317 ("btrfs:
obsolete and remove mount option alloc_start") which has details why
it's been deprecated. We can remove it.
Signed-off-by: David Sterba <dsterba@suse.com>
When syncing the log, we used to update the log root tree without holding
neither the log_mutex of the subvolume root nor the log_mutex of log root
tree.
We used to have two critical sections delimited by the log_mutex of the
log root tree, so in the first one we incremented the log_writers of the
log root tree and on the second one we decremented it and waited for the
log_writers counter to go down to zero. This was because the update of
the log root tree happened between the two critical sections.
The use of two critical sections allowed a little bit more of parallelism
and required the use of the log_writers counter, necessary to make sure
we didn't miss any log root tree update when we have multiple tasks trying
to sync the log in parallel.
However after commit 06989c799f ("Btrfs: fix race updating log root
item during fsync") the log root tree update was moved into a critical
section delimited by the subvolume's log_mutex. Later another commit
moved the log tree update from that critical section into the second
critical section delimited by the log_mutex of the log root tree. Both
commits addressed different bugs.
The end result is that the first critical section delimited by the
log_mutex of the log root tree became pointless, since there's nothing
done between it and the second critical section, we just have an unlock
of the log_mutex followed by a lock operation. This means we can merge
both critical sections, as the first one does almost nothing now, and we
can stop using the log_writers counter of the log root tree, which was
incremented in the first critical section and decremented in the second
criticial section, used to make sure no one in the second critical section
started writeback of the log root tree before some other task updated it.
So just remove the mutex_unlock() followed by mutex_lock() of the log root
tree, as well as the use of the log_writers counter for the log root tree.
This patch is part of a series that has the following patches:
1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree
After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:
mkfs.btrfs -f /dev/sdk
mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
dbench -D /mnt/sdk -t 300 8
umount /mnt/dsk
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are incrementing the log_batch atomic counter of the root log tree but
we never use that counter, it's used only for the log trees of subvolume
roots. We started doing it when we moved the log_batch and log_write
counters from the global, per fs, btrfs_fs_info structure, into the
btrfs_root structure in commit 7237f18336 ("Btrfs: fix tree logs
parallel sync").
So just stop doing it for the log root tree and add a comment over the
field declaration so inform it's used only for log trees of subvolume
roots.
This patch is part of a series that has the following patches:
1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree
After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:
mkfs.btrfs -f /dev/sdk
mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
dbench -D /mnt/sdk -t 300 8
umount /mnt/dsk
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging an inode we are committing its delayed items if either the
inode is a directory or if it is a new inode, created in the current
transaction.
We need to do it for directories, since new directory indexes are stored
as delayed items of the inode and when logging a directory we need to be
able to access all indexes from the fs/subvolume tree in order to figure
out which index ranges need to be logged.
However for new inodes that are not directories, we do not need to do it
because the only type of delayed item they can have is the inode item, and
we are guaranteed to always log an up to date version of the inode item:
*) for a full fsync we do it by committing the delayed inode and then
copying the item from the fs/subvolume tree with
copy_inode_items_to_log();
*) for a fast fsync we always log the inode item based on the contents of
the in-memory struct btrfs_inode. We guarantee this is always done since
commit e4545de5b0 ("Btrfs: fix fsync data loss after append write").
So stop running delayed items for a new inodes that are not directories,
since that forces committing the delayed inode into the fs/subvolume tree,
wasting time and adding contention to the tree when a full fsync is not
required. We will only do it in case a fast fsync is needed.
This patch is part of a series that has the following patches:
1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree
After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:
mkfs.btrfs -f /dev/sdk
mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
dbench -D /mnt/sdk -t 300 8
umount /mnt/dsk
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 2c2c452b0c ("Btrfs: fix fsync when extend references are added
to an inode") forced a commit of the delayed inode when logging an inode
in order to ensure we would end up logging the inode item during a full
fsync. By committing the delayed inode, we updated the inode item in the
fs/subvolume tree and then later when copying items from leafs modified in
the current transaction into the log tree (with copy_inode_items_to_log())
we ended up copying the inode item from the fs/subvolume tree into the log
tree. Logging an up to date version of the inode item is required to make
sure at log replay time we get the link count fixup triggered among other
things (replay xattr deletes, etc). The test case generic/040 from fstests
exercises the bug which that commit fixed.
However for a fast fsync we don't need to commit the delayed inode because
we always log an up to date version of the inode item based on the struct
btrfs_inode we have in-memory. We started doing this for fast fsyncs since
commit e4545de5b0 ("Btrfs: fix fsync data loss after append write").
So just stop committing the delayed inode if we are doing a fast fsync,
we are only wasting time and adding contention on fs/subvolume tree.
This patch is part of a series that has the following patches:
1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree
After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:
mkfs.btrfs -f /dev/sdk
mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
dbench -D /mnt/sdk -t 300 8
umount /mnt/dsk
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When the anonymous block device pool is exhausted, subvolume/snapshot
creation fails with EMFILE (Too many files open). This has been reported
by a user. The allocation happens in the second phase during transaction
commit where it's only way out is to abort the transaction
BTRFS: Transaction aborted (error -24)
WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
Call Trace:
create_pending_snapshots+0x82/0xa0 [btrfs]
btrfs_commit_transaction+0x275/0x8c0 [btrfs]
btrfs_mksubvol+0x4b9/0x500 [btrfs]
btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
btrfs_ioctl+0x11a4/0x2da0 [btrfs]
do_vfs_ioctl+0xa9/0x640
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x5a/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace 33f2f83f3d5250e9 ]---
BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
BTRFS info (device sda1): forced readonly
BTRFS warning (device sda1): Skipping commit of aborted transaction.
BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown
[CAUSE]
When the global anonymous block device pool is exhausted, the following
call chain will fail, and lead to transaction abort:
btrfs_ioctl_snap_create_v2()
|- btrfs_ioctl_snap_create_transid()
|- btrfs_mksubvol()
|- btrfs_commit_transaction()
|- create_pending_snapshot()
|- btrfs_get_fs_root()
|- btrfs_init_fs_root()
|- get_anon_bdev()
[FIX]
Although we can't enlarge the anonymous block device pool, at least we
can preallocate anon_dev for subvolume/snapshot in the first phase,
outside of transaction context and exactly at the moment the user calls
the creation ioctl.
Reported-by: Greed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When a lot of subvolumes are created, there is a user report about
transaction aborted caused by slow anonymous block device reclaim:
BTRFS: Transaction aborted (error -24)
WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
Call Trace:
create_pending_snapshots+0x82/0xa0 [btrfs]
btrfs_commit_transaction+0x275/0x8c0 [btrfs]
btrfs_mksubvol+0x4b9/0x500 [btrfs]
btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
btrfs_ioctl+0x11a4/0x2da0 [btrfs]
do_vfs_ioctl+0xa9/0x640
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x5a/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace 33f2f83f3d5250e9 ]---
BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
BTRFS info (device sda1): forced readonly
BTRFS warning (device sda1): Skipping commit of aborted transaction.
BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown
[CAUSE]
The anonymous device pool is shared and its size is 1M. It's possible to
hit that limit if the subvolume deletion is not fast enough and the
subvolumes to be cleaned keep the ids allocated.
[WORKAROUND]
We can't avoid the anon device pool exhaustion but we can shorten the
time the id is attached to the subvolume root once the subvolume becomes
invisible to the user.
Reported-by: Greed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When a lot of subvolumes are created, there is a user report about
transaction aborted:
BTRFS: Transaction aborted (error -24)
WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
Call Trace:
create_pending_snapshots+0x82/0xa0 [btrfs]
btrfs_commit_transaction+0x275/0x8c0 [btrfs]
btrfs_mksubvol+0x4b9/0x500 [btrfs]
btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
btrfs_ioctl+0x11a4/0x2da0 [btrfs]
do_vfs_ioctl+0xa9/0x640
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x5a/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace 33f2f83f3d5250e9 ]---
BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
BTRFS info (device sda1): forced readonly
BTRFS warning (device sda1): Skipping commit of aborted transaction.
BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown
[CAUSE]
The error is EMFILE (Too many files open) and comes from the anonymous
block device allocation. The ids are in a shared pool of size 1<<20.
The ids are assigned to live subvolumes, ie. the root structure exists
in memory (eg. after creation or after the root appears in some path).
The pool could be exhausted if the numbers are not reclaimed fast
enough, after subvolume deletion or if other system component uses the
anon block devices.
[WORKAROUND]
Since it's not possible to completely solve the problem, we can only
minimize the time the id is allocated to a subvolume root.
Firstly, we can reduce the use of anon_dev by trees that are not
subvolume roots, like data reloc tree.
This patch will do extra check on root objectid, to skip roots that
don't need anon_dev. Currently it's only data reloc tree and orphan
roots.
Reported-by: Greed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch will add the following sysfs interface:
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/referenced
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/exclusive
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/max_referenced
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/max_exclusive
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/limit_flags
Which is also available in output of "btrfs qgroup show".
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/rsv_data
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/rsv_meta_pertrans
/sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/rsv_meta_prealloc
The last 3 rsv related members are not visible to users, but can be very
useful to debug qgroup limit related bugs.
Also, to avoid '/' used in <qgroup_id>, the separator between qgroup
level and qgroup id is changed to '_'.
The interface is not hidden behind 'debug' as we want this interface to
be included into production build and to provide another way to read the
qgroup information besides the ioctls.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The qgroup level is limited to u16, so no need to use u64 for it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
vfs_inode is used only for the inode number everything else requires
btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use btrfs_ino ]
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of making multiple calls to BTRFS_I simply take btrfs_inode as
an input paramter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The vfs inode is only used for a pair of inode_lock/unlock calls all
other uses call for btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All of its children functions use btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All of its children take btrfs_inode so bubble up this requirement to
btrfs_delalloc_reserve_space's interface and stop calling BTRFS_I
internally.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of calling BTRFS_I on the passed vfs_inode take btrfs_inode
directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It needs btrfs_inode so take it as a parameter directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It only uses btrfs_inode internally so take it as a parameter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No point in taking an inode only to get btrfs_fs_info from it, instead
take btrfs_fs_info directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's only a single use of vfs_inode in a tracepoint so let's take
btrfs_inode directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a single use of the generic vfs_inode so let's take btrfs_inode
as a parameter and remove couple of redundant BTRFS_I() calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preparation to make btrfs_dirty_pages take btrfs_inode as parameter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Only find_lock_delalloc_range uses vfs_inode so let's take the
btrfs_inode as a parameter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It has only a single use for a generic vfs inode vs 3 for btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function really needs a btrfs_inode and not a generic vfs one. Take
it as a parameter and get rid of superfluous BTRFS_I() calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Take btrfs_inode directly and stop using superfulous BTRFS_I calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Simply forwards its argument so let's get rid of one extra BTRFS_I by
taking btrfs_inode directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All children now take btrfs_inode so convert it to taking it as a
parameter as well.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Gets rid of superfulous BTRFS_I() calls and prepare for converting
btrfs_run_delalloc_range to using btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Simply gets rid of superfluous BTRFS_I() calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Gets rid of superfluous BTRFS_I() calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preparation to converting btrfs_run_delalloc_range to using btrfs_inode
without BTRFS_I() calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It really wants btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It doesn't really need vfs_inode but btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It only uses vfs inode for assigning it to the async_chunk function.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It only really uses btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It really wants btrfs_inode and is prepration to converting
run_delalloc_nocow to taking btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It just forwards its argument to __btrfs_qgroup_release_data.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All but 3 uses require vfs_inode so convert the logic to have
btrfs_inode be the main inode struct.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Majority of its uses are for btrfs_inode so take it as an argument
directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It simpy forwards its inode argument to __btrfs_add_ordered_extent which
already takes btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All its children functions take btrfs_inode so convert it to taking
btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
