forked from Minki/linux
995d355669
18 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Arnaldo Carvalho de Melo
|
5b596e0ff0 |
perf regs: Make perf_reg_name() return "unknown" instead of NULL
To avoid breaking the build on arches where this is not wired up, at
least all the other features should be made available and when using
this specific routine, the "unknown" should point the user/developer to
the need to wire this up on this particular hardware architecture.
Detected in a container mipsel debian cross build environment, where it
shows up as:
In file included from /usr/mipsel-linux-gnu/include/stdio.h:867,
from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
from util/session.c:13:
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2:
/usr/mipsel-linux-gnu/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cross compiler details:
mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
Also on mips64:
In file included from /usr/mips64-linux-gnuabi64/include/stdio.h:867,
from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
from util/session.c:13:
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2,
inlined from 'regs_user__printf' at util/session.c:1139:3,
inlined from 'dump_sample' at util/session.c:1246:3,
inlined from 'machines__deliver_event' at util/session.c:1421:3:
/usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2,
inlined from 'regs_intr__printf' at util/session.c:1147:3,
inlined from 'dump_sample' at util/session.c:1249:3,
inlined from 'machines__deliver_event' at util/session.c:1421:3:
/usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cross compiler details:
mips64-linux-gnuabi64-gcc (Debian 9.2.1-8) 9.2.1 20190909
Fixes:
|
||
Ian Rogers
|
42466b9f29 |
perf tools: Avoid 'sample_reg_masks' being const + weak
Being const + weak breaks with some compilers that constant-propagate
from the weak symbol. This behavior is outside of the specification, but
in LLVM is chosen to match GCC's behavior.
LLVM's implementation was set in this patch:
|
||
Alexey Budankov
|
d194d8fccf |
perf record: Allow mixing --user-regs with --call-graph=dwarf
When DWARF stacks were requested and at the same time that the user
specifies a register set using the --user-regs option the full register
context was being captured on samples:
$ perf record -g --call-graph dwarf,1024 --user-regs=IP,SP,BP -- stack_test2.g.O3
188143843893585 0x6b48 [0x4f8]: PERF_RECORD_SAMPLE(IP, 0x4002): 23828/23828: 0x401236 period: 1363819 addr: 0x7ffedbdd51ac
... FP chain: nr:0
... user regs: mask 0xff0fff ABI 64-bit
.... AX 0x53b
.... BX 0x7ffedbdd3cc0
.... CX 0xffffffff
.... DX 0x33d3a
.... SI 0x7f09b74c38d0
.... DI 0x0
.... BP 0x401260
.... SP 0x7ffedbdd3cc0
.... IP 0x401236
.... FLAGS 0x20a
.... CS 0x33
.... SS 0x2b
.... R8 0x7f09b74c3800
.... R9 0x7f09b74c2da0
.... R10 0xfffffffffffff3ce
.... R11 0x246
.... R12 0x401070
.... R13 0x7ffedbdd5db0
.... R14 0x0
.... R15 0x0
... ustack: size 1024, offset 0xe0
. data_src: 0x5080021
... thread: stack_test2.g.O:23828
...... dso: /root/abudanko/stacks/stack_test2.g.O3
I.e. the --user-regs=IP,SP,BP was being ignored, being overridden by the
needs of --call-graph=dwarf.
After applying the change in this patch the sample data contains the
user specified register, but making sure that at least the minimal set
of register needed for DWARF unwinding (DWARF_MINIMAL_REGS) is
requested.
The user is warned that DWARF unwinding may not work if extra registers
end up being needed.
-g call-graph dwarf,K full_regs
--user-regs=user_regs user_regs
-g call-graph dwarf,K --user-regs=user_regs user_regs + DWARF_MINIMAL_REGS
$ perf record -g --call-graph dwarf,1024 --user-regs=BP -- ls
WARNING: The use of --call-graph=dwarf may require all the user registers, specifying a subset with --user-regs may render DWARF unwinding unreliable, so the minimal registers set (IP, SP) is explicitly forced.
arch COPYING Documentation include Kbuild lbuild MAINTAINERS modules.builtin Module.symvers perf.data.old scripts System.map virt
block CREDITS drivers init Kconfig lib Makefile modules.builtin.modinfo net README security tools vmlinux
certs crypto fs ipc kernel LICENSES mm modules.order perf.data samples sound usr vmlinux.o
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
188368474305373 0x5e40 [0x470]: PERF_RECORD_SAMPLE(IP, 0x4002): 23839/23839: 0x401236 period: 1260507 addr: 0x7ffd3d85e96c
... FP chain: nr:0
... user regs: mask 0x1c0 ABI 64-bit
.... BP 0x401260
.... SP 0x7ffd3d85cc20
.... IP 0x401236
... ustack: size 1024, offset 0x58
. data_src: 0x5080021
Committer notes:
Detected build failures on arches where PERF_REGS_ is not available,
such as debian:experimental-x-{mips,mips64,mipsel}, fedora 24 and 30 for
ARC uClibc and glibc, reported to Alexey that provided a patch moving
the DWARF_MINIMAL_REGS from evsel.c to util/perf_regs.h, where it is
guarded by an HAVE_PERF_REGS_SUPPORT ifdef.
Committer testing:
# perf record --user-regs=bp,ax -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.955 MB perf.data (1773 samples) ]
# perf script -F+uregs | grep AX: | head -5
perf 1719 [000] 181.272398: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272402: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272403: 8 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272405: 181 cycles: ffffffffba06a7c6 native_write_msr+0x6 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272406: 4405 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
# perf record --call-graph=dwarf --user-regs=bp,ax -a sleep 1
WARNING: The use of --call-graph=dwarf may require all the user registers, specifying a subset with --user-regs may render DWARF unwinding unreliable, so the minimal registers set (IP, SP) is explicitly forced.
[ perf record: Woken up 55 times to write data ]
[ perf record: Captured and wrote 24.184 MB perf.data (2841 samples) ]
[root@quaco ~]# perf script --hide-call-graph -F+uregs | grep AX: | head -5
perf 1729 [000] 211.268006: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268014: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268017: 5 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268020: 48 cycles: ffffffffba06a7c6 native_write_msr+0x6 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268024: 490 cycles: ffffffffba00e471 intel_bts_enable_local+0x21 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
#
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/e7fd37b1-af22-0d94-a0dc-5895e803bbfe@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Kan Liang
|
af785e75bf |
perf parse-regs: Add generic support for arch__intr/user_reg_mask()
There may be different register mask for use with intr or user on some platforms, e.g. Icelake. Add weak functions arch__intr_reg_mask() and arch__user_reg_mask() to return intr and user register mask respectively. Check mask before printing or comparing the register name. Generic code always return PERF_REGS_MASK. No functional change. Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1557865174-56264-2-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Andi Kleen
|
ca138a7aab |
perf tools x86: Add support for recording and printing XMM registers
Icelake and later platforms support collecting XMM registers with PEBS
event.
Add support for 'perf script' to dump them, and support for the register
parser in 'perf record -I=' ... to configure them.
For now they are just printed in hex, we could potentially later add
other formats too.
Committer testing:
Before:
# perf record -IXMM0
Warning:
unknown register XMM0, check man page or run 'perf record -I?'
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
#
# perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
#
After:
# perf record -IXMM0
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles).
/bin/dmesg | grep -i perf may provide additional information.
#
# perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 XMM9 XMM10 XMM11 XMM12 XMM13 XMM14 XMM15
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-I, --intr-regs[=<any register>]
sample selected machine registers on interrupt, use -I ? to list register names
#
More work is needed to, when faced with such error, warn the user that
that register is not available on the running platform.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190506141926.13659-1-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Ravi Bangoria
|
d451a205da |
perf/sdt/x86: Move OP parser to tools/perf/arch/x86/
SDT marker argument is in N@OP format. N is the size of argument and OP is the actual assembly operand. OP is arch dependent component and hence it's parsing logic also should be placed under tools/perf/arch/. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexis Berlemont <alexis.berlemont@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170328094754.3156-3-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Alexis Berlemont
|
3b1f8311f6 |
perf probe: Add sdt probes arguments into the uprobe cmd string
An sdt probe can be associated with arguments but they were not passed to the user probe tracing interface (uprobe_events); this patch adapts the sdt argument descriptors according to the uprobe input format. As the uprobe parser does not support scaled address mode, perf will skip arguments which cannot be adapted to the uprobe format. Here are the results: $ perf buildid-cache -v --add test_sdt $ perf probe -x test_sdt sdt_libfoo:table_frob $ perf probe -x test_sdt sdt_libfoo:table_diddle $ perf record -e sdt_libfoo:table_frob -e sdt_libfoo:table_diddle test_sdt $ perf script test_sdt ... 666.255678: sdt_libfoo:table_frob: (4004d7) arg0=0 arg1=0 test_sdt ... 666.255683: sdt_libfoo:table_diddle: (40051a) arg0=0 arg1=0 test_sdt ... 666.255686: sdt_libfoo:table_frob: (4004d7) arg0=1 arg1=2 test_sdt ... 666.255689: sdt_libfoo:table_diddle: (40051a) arg0=3 arg1=4 test_sdt ... 666.255692: sdt_libfoo:table_frob: (4004d7) arg0=2 arg1=4 test_sdt ... 666.255694: sdt_libfoo:table_diddle: (40051a) arg0=6 arg1=8 Signed-off-by: Alexis Berlemont <alexis.berlemont@gmail.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20161214000732.1710-3-alexis.berlemont@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Sukadev Bhattiprolu
|
9fb4765451 |
perf tools: Fix build break on powerpc due to sample_reg_masks
perf_regs.c does not get built on Powerpc as CONFIG_PERF_REGS is false. So the weak definition for 'sample_regs_masks' doesn't get picked up. Adding perf_regs.o to util/Build unconditionally, exposes a redefinition error for 'perf_reg_value()' function (due to the static inline version in util/perf_regs.h). So use #ifdef HAVE_PERF_REGS_SUPPORT' around that function. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: linuxppc-dev@ozlabs.org Link: http://lkml.kernel.org/r/20150930182836.GA27858@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Stephane Eranian
|
af4aeadd8c |
perf tools: Fix link time error with sample_reg_masks on non x86
This patch makes perf compile on non x86 platforms by defining a weak symbol for sample_reg_masks[] in util/perf_regs.c. The patch also moves the REG() and REG_END() macros into the util/per_regs.h header file. The macros are renamed to SMPL_REG/SMPL_REG_END to avoid clashes with other header files. Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1441099814-26783-1-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Stephane Eranian
|
c5e991ee9d |
perf/x86: Add list of register names
This patch adds a way to locate a register identifier (PERF_X86_REG_*) based on its name, e.g., AX. This will be used by a subsequent patch to improved flexibility of perf record. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1441039273-16260-3-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jiri Olsa
|
0c4e774fad |
perf tools: Cache register accesses for unwind processing
Caching registers value into an array. Got about 4% speed up
of perf_reg_value function for report command processing
dwarf unwind stacks.
Output from report over 1.5 GB data with DWARF unwind stacks:
(TODO fix perf diff)
current code:
5.84% perf perf [.] perf_reg_value
change:
1.94% perf perf [.] perf_reg_value
And little bit of overall speed up:
(perf stat -r 5 -e '{cycles,instructions}:u' ...)
current code:
310,298,611,754 cycles ( +- 0.33% )
439,669,689,341 instructions ( +- 0.03% )
188.656753166 seconds time elapsed ( +- 0.82% )
change:
291,315,329,878 cycles ( +- 0.22% )
391,763,485,304 instructions ( +- 0.03% )
180.742249687 seconds time elapsed ( +- 0.64% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-2-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
|
||
Borislav Petkov
|
d944c4eebc |
tools: Consolidate types.h
Combine all definitions into a common tools/include/linux/types.h and kill the wild growth elsewhere. Move DECLARE_BITMAP to its proper bitmap.h header. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Link: http://lkml.kernel.org/n/tip-azczs7qcv6h9xek9od10hiv2@git.kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org> |
||
Jiri Olsa
|
c9b951c4d1 |
perf callchain: Separate perf_reg_value function in perf_regs object
Making perf_reg_value function global (formely reg_value), because it's going to be used globaly across all code providing the dwarf post unwind feature. Changing its prototype to be generic: -int reg_value(unw_word_t *valp, struct regs_dump *regs, int id) +int perf_reg_value(u64 *valp, struct regs_dump *regs, int id); Changing the valp type from libunwind specific 'unw_word_t' to u64. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Jean Pihet <jean.pihet@linaro.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1389098853-14466-13-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Ingo Molnar
|
89fe808ae7 |
tools/perf: Standardize feature support define names to: HAVE_{FEATURE}_SUPPORT
Standardize all the feature flags based on the HAVE_{FEATURE}_SUPPORT naming convention:
HAVE_ARCH_X86_64_SUPPORT
HAVE_BACKTRACE_SUPPORT
HAVE_CPLUS_DEMANGLE_SUPPORT
HAVE_DWARF_SUPPORT
HAVE_ELF_GETPHDRNUM_SUPPORT
HAVE_GTK2_SUPPORT
HAVE_GTK_INFO_BAR_SUPPORT
HAVE_LIBAUDIT_SUPPORT
HAVE_LIBELF_MMAP_SUPPORT
HAVE_LIBELF_SUPPORT
HAVE_LIBNUMA_SUPPORT
HAVE_LIBUNWIND_SUPPORT
HAVE_ON_EXIT_SUPPORT
HAVE_PERF_REGS_SUPPORT
HAVE_SLANG_SUPPORT
HAVE_STRLCPY_SUPPORT
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-u3zvqejddfZhtrbYbfhi3spa@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
Namhyung Kim
|
95485b1cda |
perf tools: Convert to LIBUNWIND_SUPPORT
For building perf without libunwind, we can set NO_LIBUNWIND=1 as a argument of make. It then defines NO_LIBUNWIND_SUPPORT macro for C code to do the proper handling. However it usually used in a negative semantics - e.g. #ifndef - so we saw double negations which can be misleading. Convert it to a positive form to make it more readable. Also change NO_PERF_REGS macro to HAVE_PERF_REGS for the same reason. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1348824728-14025-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Irina Tirdea
|
1d037ca164 |
perf tools: Use __maybe_used for unused variables
perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored
__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.
The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with
|
||
|
Jiri Olsa
|
2bcd355b71 |
perf tools: Add interface to arch registers sets
Adding header files to access unified API for arch registers. util/perf_regs.h - global perf_reg declarations arch/x86/include/perf_regs.h - x86 arch specific Adding perf_reg_name function to obtain register name based on the reg ID value, and PERF_REGS_MASK macro with mask definition of all current arch registers (will be used in unwind patches). Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-9-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |