We are running out of mount option bits. Add handling for using
s_mount_opt2. Add ext4 and jbd2 fast commit feature flag and also add
ability to turn off the fast commit feature in Ext4.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we try to use file already used as a quota file again (for the same
or different quota type), strange things can happen. At the very least
lockdep annotations may be wrong but also inode flags may be wrongly set
/ reset. When the file is used for two quota types at once we can even
corrupt the file and likely crash the kernel. Catch all these cases by
checking whether passed file is already used as quota file and bail
early in that case.
This fixes occasional generic/219 failure due to lockdep complaint.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201015110330.28716-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4 is formatted with lazy_journal_init=1 and transactions from
the previous filesystem are still on disk, it is possible that they are
considered during a recovery after a crash. Because the checksum seed
has changed, the CRC check will fail, and the journal recovery fails
with checksum error although the journal is otherwise perfectly valid.
Fix the problem by checking commit block time stamps to determine
whether the data in the journal block is just stale or whether it is
indeed corrupt.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Fengnan Chang <changfengnan@hikvision.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201012164900.20197-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Here we use the READ_ONCE to fix race conditions in ->d_compare() and
->d_hash() when they are called in RCU-walk mode, seems we can use
the normal helper d_inode_rcu() to get the actual inode.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/1602317416-1260-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
left shifting m_lblk by blkbits was causing value overflow and hence
it was not able to convert unwritten to written extent.
So, make sure we typecast it to loff_t before do left shift operation.
Also in func ext4_convert_unwritten_io_end_vec(), make sure to initialize
ret variable to avoid accidentally returning an uninitialized ret.
This patch fixes the issue reported in ext4 for bs < ps with
dioread_nolock mount option.
Fixes: c8cc88163f ("ext4: Add support for blocksize < pagesize in dioread_nolock")
Cc: stable@kernel.org
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/af902b5db99e8b73980c795d84ad7bb417487e76.1602168865.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This implements journal callbacks j_submit|finish_inode_data_buffers()
with different behavior for data=journal: to write-protect pages under
commit, preventing changes to buffers writeably mapped to userspace.
If a buffer's content changes between commit's checksum calculation
and write-out to disk, it can cause journal recovery/mount failures
upon a kernel crash or power loss.
[ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support!
[ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log
[ 27.342716] JBD2: recovery failed
[ 27.343316] EXT4-fs (loop0): error loading journal
mount: /ext4: can't read superblock on /dev/loop0.
In j_submit_inode_data_buffers() we write-protect the inode's pages
with write_cache_pages() and redirty w/ writepage callback if needed.
In j_finish_inode_data_buffers() there is nothing do to.
And in order to use the callbacks, inodes are added to the inode list
in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite().
In ext4_page_mkwrite() we must make sure that the buffers are attached
to the transaction as jbddirty with write_end_fn(), as already done in
__ext4_journalled_writepage().
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reported-by: Dann Frazier <dann.frazier@canonical.com>
Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
These are two fixes for data journalling required by
the next patch, discovered while testing it.
First, the optimization to return early if all buffers
are mapped is not appropriate for the next patch:
The inode _must_ be added to the transaction's list in
data=journal mode (so to write-protect pages on commit)
thus we cannot return early there.
Second, once that optimization to reduce transactions
was disabled for data=journal mode, more transactions
happened, and occasionally hit this warning message:
'JBD2: Spotted dirty metadata buffer'.
Reason is, block_page_mkwrite() will set_buffer_dirty()
before do_journal_get_write_access() that is there to
prevent it. This issue was masked by the optimization.
So, on data=journal use __block_write_begin() instead.
This also requires page locking and len recalculation.
(see block_page_mkwrite() for implementation details.)
Finally, as Jan noted there is little sharing between
data=journal and other modes in ext4_page_mkwrite().
However, a prototype of ext4_journalled_page_mkwrite()
showed there still would be lots of duplicated lines
(tens of) that didn't seem worth it.
Thus this patch ends up with an ugly goto to skip all
non-data journalling code (to avoid long indentations,
but that can be changed..) in the beginning, and just
a conditional in the transaction section.
Well, we skip a common part to data journalling which
is the page truncated check, but we do it again after
ext4_journal_start() when we re-acquire the page lock
(so not to acquire the page lock twice needlessly for
data journalling.)
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201006004841.600488-4-mfo@canonical.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Introduce journal callbacks to allow different behaviors
for an inode in journal_submit|finish_inode_data_buffers().
The existing users of the current behavior (ext4, ocfs2)
are adapted to use the previously exported functions
that implement the current behavior.
Users are callers of jbd2_journal_inode_ranged_write|wait(),
which adds the inode to the transaction's inode list with
the JI_WRITE|WAIT_DATA flags. Only ext4 and ocfs2 in-tree.
Both CONFIG_EXT4_FS and CONFIG_OCSFS2_FS select CONFIG_JBD2,
which builds fs/jbd2/commit.c and journal.c that define and
export the functions, so we can call directly in ext4/ocfs2.
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201006004841.600488-3-mfo@canonical.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Export functions that implement the current behavior done
for an inode in journal_submit|finish_inode_data_buffers().
No functional change.
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201006004841.600488-2-mfo@canonical.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now we only use sb_bread_unmovable() to read superblock and descriptor
block at mount time, so there is no opportunity that we need to clear
buffer verified bit and also handle buffer write_io error bit. But for
the sake of unification, let's introduce ext4_sb_bread_unmovable() to
replace all sb_bread_unmovable(). After this patch, we stop using read
helpers in fs/buffer.c.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200924073337.861472-8-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We have already remove open codes that invoke helpers provide by
fs/buffer.c in all places reading metadata buffers. This patch switch to
use ext4_sb_bread() to replace all sb_bread() helpers, which is
ext4_read_bh() helper back end.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200924073337.861472-7-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we readahead inode tables in __ext4_get_inode_loc(), it may bypass
buffer_write_io_error() check, so introduce ext4_sb_breadahead_unmovable()
to handle this special case.
This patch also replace sb_breadahead_unmovable() in ext4_fill_super()
for the sake of unification.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200924073337.861472-6-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We have already introduced ext4_buffer_uptodate() to re-set the uptodate
bit on buffer which has been failed to write out to disk. Just remove
the redundant codes and switch to use ext4_buffer_uptodate() in
__ext4_get_inode_loc().
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200924073337.861472-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Revome all open codes that read metadata buffers, switch to use
ext4_read_bh_*() common helpers.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200924073337.861472-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The previous patch add clear_buffer_verified() before we read metadata
block from disk again, but it's rather easy to miss clearing of this bit
because currently we read metadata buffer through different open codes
(e.g. ll_rw_block(), bh_submit_read() and invoke submit_bh() directly).
So, it's time to add common helpers to unify in all the places reading
metadata buffers instead. This patch add 3 helpers:
- ext4_read_bh_nowait(): async read metadata buffer if it's actually
not uptodate, clear buffer_verified bit before read from disk.
- ext4_read_bh(): sync version of read metadata buffer, it will wait
until the read operation return and check the return status.
- ext4_read_bh_lock(): try to lock the buffer before read buffer, it
will skip reading if the buffer is already locked.
After this patch, we need to use these helpers in all the places reading
metadata buffer instead of different open codes.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200924073337.861472-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The metadata buffer is no longer trusted after we read it from disk
again because it is not uptodate for some reasons (e.g. failed to write
back). Otherwise we may get below memory corruption problem in
ext4_ext_split()->memset() if we read stale data from the newly
allocated extent block on disk which has been failed to async write
out but miss verify again since the verified bit has already been set
on the buffer.
[ 29.774674] BUG: unable to handle kernel paging request at ffff88841949d000
...
[ 29.783317] Oops: 0002 [#2] SMP
[ 29.784219] R10: 00000000000f4240 R11: 0000000000002e28 R12: ffff88842fa1c800
[ 29.784627] CPU: 1 PID: 126 Comm: kworker/u4:3 Tainted: G D W
[ 29.785546] R13: ffffffff9cddcc20 R14: ffffffff9cddd420 R15: ffff88842fa1c2f8
[ 29.786679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS ?-20190727_0738364
[ 29.787588] FS: 0000000000000000(0000) GS:ffff88842fa00000(0000) knlGS:0000000000000000
[ 29.789288] Workqueue: writeback wb_workfn
[ 29.790319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 29.790321] (flush-8:0)
[ 29.790844] CR2: 0000000000000008 CR3: 00000004234f2000 CR4: 00000000000006f0
[ 29.791924] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 29.792839] RIP: 0010:__memset+0x24/0x30
[ 29.793739] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 29.794256] Code: 90 90 90 90 90 90 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 033
[ 29.795161] Kernel panic - not syncing: Fatal exception in interrupt
...
[ 29.808149] Call Trace:
[ 29.808475] ext4_ext_insert_extent+0x102e/0x1be0
[ 29.809085] ext4_ext_map_blocks+0xa89/0x1bb0
[ 29.809652] ext4_map_blocks+0x290/0x8a0
[ 29.809085] ext4_ext_map_blocks+0xa89/0x1bb0
[ 29.809652] ext4_map_blocks+0x290/0x8a0
[ 29.810161] ext4_writepages+0xc85/0x17c0
...
Fix this by clearing buffer's verified bit if we read meta block from
disk again.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200924073337.861472-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If userspace asked fsmap to try to count the number of entries, we cannot
return more than UINT_MAX entries because fmh_entries is u32.
Therefore, stop counting if we hit this limit or else we will waste time
to return truncated results.
Fixes: 0c9ec4beec ("ext4: support GETFSMAP ioctls")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20201001222148.GA49520@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Consider a situation when a filesystem was uncleanly shutdown and the
orphan list is not empty and a read-only mount is attempted. The orphan
list cleanup during mount will fail with:
ext4_check_bdev_write_error:193: comm mount: Error while async write back metadata
This happens because sbi->s_bdev_wb_err is not initialized when mounting
the filesystem in read only mode and so ext4_check_bdev_write_error()
falsely triggers.
Initialize sbi->s_bdev_wb_err unconditionally to avoid this problem.
Fixes: bc71726c72 ("ext4: abort the filesystem if failed to async write metadata buffer")
Cc: stable@kernel.org
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200928020556.710971-1-zhangxiaoxu5@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename system_blks to s_system_blks inside ext4_sb_info, keep
the naming rules consistent with other variables, which is
convenient for code reading and writing.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/1600916623-544-2-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename journal_dev to s_journal_dev inside ext4_sb_info, keep
the naming rules consistent with other variables, which is
convenient for code reading and writing.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/1600916623-544-1-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In case if the file already has underlying blocks/extents allocated
then we don't need to start a journal txn and can directly return
the underlying mapping. Currently ext4_iomap_begin() is used by
both DAX & DIO path. We can check if the write request is an
overwrite & then directly return the mapping information.
This could give a significant perf boost for multi-threaded writes
specially random overwrites.
On PPC64 VM with simulated pmem(DAX) device, ~10x perf improvement
could be seen in random writes (overwrite). Also bcoz this optimizes
away the spinlock contention during jbd2 slab cache allocation
(jbd2_journal_handle). On x86 VM, ~2x perf improvement was observed.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/88e795d8a4d5cd22165c7ebe857ba91d68d8813e.1600401668.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The race condition could cause the persisted superblock checksum
to not match the contents of the superblock, causing the
superblock to be considered corrupt.
An example of the race follows. A first thread is interrupted in the
middle of a checksum calculation. Then, another thread changes the
superblock, calculates a new checksum, and sets it. Then, the first
thread resumes and sets the checksum based on the older superblock.
To fix, serialize the superblock checksum calculation using the buffer
header lock. While a spinlock is sufficient, the buffer header is
already there and there is precedent for locking it (e.g. in
ext4_commit_super).
Tested the patch by booting up a kernel with the patch, creating
a filesystem and some files (including some orphans), and then
unmounting and remounting the file system.
Cc: stable@kernel.org
Signed-off-by: Constantine Sapuntzakis <costa@purestorage.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200914161014.22275-1-costa@purestorage.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4_journal_get_write_access() fails, we should
terminate the execution flow and release n_group_desc,
iloc.bh, dind and gdb_bh.
Cc: stable@kernel.org
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20200829025403.3139-1-dinghao.liu@zju.edu.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The 'handle' argument is not used for anything so simply remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200826133116.11592-1-nborisov@suse.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fields s_free_blocks_count_hi, s_r_blocks_count_hi and s_blocks_count_hi
are not valid if EXT4_FEATURE_INCOMPAT_64BIT is not enabled and should be
treated as zeroes.
Signed-off-by: Petr Malat <oss@malat.biz>
Link: https://lore.kernel.org/r/20200825150016.3363-1-oss@malat.biz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Delete repeated words in fs/ext4/.
{the, this, of, we, after}
Also change spelling of "xttr" in inline.c to "xattr" in 2 places.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200805024850.12129-1-rdunlap@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_discard_group_preallocations() can be releasing group lock with
preallocations accumulated on its local list. Thus although
discard_pa_seq was incremented and concurrent allocating processes will
be retrying allocations, it can happen that premature ENOSPC error is
returned because blocks used for preallocations are not available for
reuse yet. Make sure we always free locally accumulated preallocations
before releasing group lock.
Fixes: 07b5b8e1ac ("ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200924150959.4335-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As we test disk offline/online with running fsstress, we find fsstress
process is keeping running state.
kworker/u32:3-262 [004] ...1 140.787471: ext4_mb_discard_preallocations: dev 8,32 needed 114
....
kworker/u32:3-262 [004] ...1 140.787471: ext4_mb_discard_preallocations: dev 8,32 needed 114
ext4_mb_new_blocks
repeat:
ext4_mb_discard_preallocations_should_retry(sb, ac, &seq)
freed = ext4_mb_discard_preallocations
ext4_mb_discard_group_preallocations
this_cpu_inc(discard_pa_seq);
---> freed == 0
seq_retry = ext4_get_discard_pa_seq_sum
for_each_possible_cpu(__cpu)
__seq += per_cpu(discard_pa_seq, __cpu);
if (seq_retry != *seq) {
*seq = seq_retry;
ret = true;
}
As we see seq_retry is sum of discard_pa_seq every cpu, if
ext4_mb_discard_group_preallocations return zero discard_pa_seq in this
cpu maybe increase one, so condition "seq_retry != *seq" have always
been met.
Ritesh Harjani suggest to in ext4_mb_discard_group_preallocations function we
only increase discard_pa_seq when there is some PA to free.
Fixes: 07b5b8e1ac ("ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200916113859.1556397-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After moving ext4's bmap to iomap interface, swapon functionality
on files created using fallocate (which creates unwritten extents) are
failing. This is since iomap_bmap interface returns 0 for unwritten
extents and thus generic_swapfile_activate considers this as holes
and hence bail out with below kernel msg :-
[340.915835] swapon: swapfile has holes
To fix this we need to implement ->swap_activate aops in ext4
which will use ext4_iomap_report_ops. Since we only need to return
the list of extents so ext4_iomap_report_ops should be enough.
Cc: stable@kernel.org
Reported-by: Yuxuan Shui <yshuiv7@gmail.com>
Fixes: ac58e4fb03 ("ext4: move ext4 bmap to use iomap infrastructure")
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200904091653.1014334-1-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----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=mBw7
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two fixes for regressions in this cycle, and one that goes to 5.8
stable:
- fix leak of getname() retrieved filename
- remove plug->nowait assignment, fixing a regression with btrfs
- fix for async buffered retry"
* tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
io_uring: ensure async buffered read-retry is setup properly
io_uring: don't unconditionally set plug->nowait = true
io_uring: ensure open/openat2 name is cleaned on cancelation
A previous commit for fixing up short reads botched the async retry
path, so we ended up going to worker threads more often than we should.
Fix this up, so retries work the way they originally were intended to.
Fixes: 227c0c9673 ("io_uring: internally retry short reads")
Reported-by: Hao_Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This causes all the bios to be submitted with REQ_NOWAIT, which can be
problematic on either btrfs or on file systems that otherwise use a mix
of block devices where only some of them support it.
For now, just remove the setting of plug->nowait = true.
Reported-by: Dan Melnic <dmm@fb.com>
Reported-by: Brian Foster <bfoster@redhat.com>
Fixes: b63534c41e ("io_uring: re-issue block requests that failed because of resources")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we cancel these requests, we'll leak the memory associated with the
filename. Add them to the table of ops that need cleaning, if
REQ_F_NEED_CLEANUP is set.
Cc: stable@vger.kernel.org
Fixes: e62753e4e2 ("io_uring: call statx directly")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=tFUE
-----END PGP SIGNATURE-----
Merge tag 'for-5.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"syzkaller started to hit us with reports, here's a fix for one type
(stack overflow when printing checksums on read error).
The other patch is a fix for sysfs object, we have a test for that and
it leads to a crash."
* tag 'for-5.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix put of uninitialized kobject after seed device delete
btrfs: fix overflow when copying corrupt csums for a message
Pull vfs fixes from Al Viro:
"No common topic, just assorted fixes"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse: fix the ->direct_IO() treatment of iov_iter
fs: fix cast in fsparam_u32hex() macro
vboxsf: Fix the check for the old binary mount-arguments struct
-----BEGIN PGP SIGNATURE-----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=ImBG
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes - most of them regression fixes from this cycle, but also
a few stable heading fixes, and a build fix for the included demo tool
since some systems now actually have gettid() available"
* tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block:
io_uring: fix openat/openat2 unified prep handling
io_uring: mark statx/files_update/epoll_ctl as non-SQPOLL
tools/io_uring: fix compile breakage
io_uring: don't use retry based buffered reads for non-async bdev
io_uring: don't re-setup vecs/iter in io_resumit_prep() is already there
io_uring: don't run task work on an exiting task
io_uring: drop 'ctx' ref on task work cancelation
io_uring: grab any needed state during defer prep
The following test case leads to NULL kobject free error:
mount seed /mnt
add sprout to /mnt
umount /mnt
mount sprout to /mnt
delete seed
kobject: '(null)' (00000000dd2b87e4): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 1 PID: 15784 at lib/kobject.c:736 kobject_put+0x80/0x350
RIP: 0010:kobject_put+0x80/0x350
::
Call Trace:
btrfs_sysfs_remove_devices_dir+0x6e/0x160 [btrfs]
btrfs_rm_device.cold+0xa8/0x298 [btrfs]
btrfs_ioctl+0x206c/0x22a0 [btrfs]
ksys_ioctl+0xe2/0x140
__x64_sys_ioctl+0x1e/0x29
do_syscall_64+0x96/0x150
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f4047c6288b
::
This is because, at the end of the seed device-delete, we try to remove
the seed's devid sysfs entry. But for the seed devices under the sprout
fs, we don't initialize the devid kobject yet. So add a kobject state
check, which takes care of the bug.
Fixes: 668e48af7a ("btrfs: sysfs, add devid/dev_state kobject and device attributes")
CC: stable@vger.kernel.org # 5.6+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A previous commit unified how we handle prep for these two functions,
but this means that we check the allowed context (SQPOLL, specifically)
later than we should. Move the ring type checking into the two parent
functions, instead of doing it after we've done some setup work.
Fixes: ec65fea5a8 ("io_uring: deduplicate io_openat{,2}_prep()")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These will naturally fail when attempted through SQPOLL, but either
with -EFAULT or -EBADF. Make it explicit that these are not workable
through SQPOLL and return -EINVAL, just like other ops that need to
use ->files.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some block devices, like dm, bubble back -EAGAIN through the completion
handler. We check for this in io_read(), but don't honor it for when
we have copied the iov. Return -EAGAIN for this case before retrying,
to force punt to io-wq.
Fixes: bcf5a06304 ("io_uring: support true async buffered reads, if file provides it")
Reported-by: Zorro Lang <zlang@redhat.com>
Tested-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we already have mapped the necessary data for retry, then don't set
it up again. It's a pointless operation, and we leak the iovec if it's
a large (non-stack) vec.
Fixes: b63534c41e ("io_uring: re-issue block requests that failed because of resources")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
definition of dirtytime_interval_handler to match its prototype in
linux/writeback.h which fixes the following sparse error/warning:
fs/fs-writeback.c:2189:50: warning: incorrect type in argument 3 (different address spaces)
fs/fs-writeback.c:2189:50: expected void *
fs/fs-writeback.c:2189:50: got void [noderef] __user *buffer
fs/fs-writeback.c:2184:5: error: symbol 'dirtytime_interval_handler' redeclared with different type (incompatible argument 3 (different address spaces)):
fs/fs-writeback.c:2184:5: int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... )
fs/fs-writeback.c: note: in included file:
./include/linux/writeback.h:374:5: note: previously declared as:
./include/linux/writeback.h:374:5: int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... )
Fixes: 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200907093140.13434-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
