The driver used incorrect flags to clear interrupt status.
The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
edid returned by drm_get_edid should be freed.
The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The bits for rotation are not used as exclusively. So GSC_IN_ROT_270 can
not be used for swap detection. The definition of it is same with
GSC_IN_ROT_MASK. It is enough to check GSC_IN_ROT_90 bit is set or not to
check whether width / height size swapping is needed.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fix for nasty crash on mdp4 in disable path, fix for dma-buf export,
smb leak on mdp5 which could result in intermittent modeset fails, and
don't let interrupted system call disturb atomic commit once we are
past the point of no return.
* 'msm-fixes-4.2' of git://people.freedesktop.org/~robclark/linux:
drm/msm/mdp5: release SMB (shared memory blocks) in various cases
drm/msm: change to uninterruptible wait in atomic commit
drm/msm: mdp4: Fix drm_framebuffer dereference crash
drm/msm: fix msm_gem_prime_get_sg_table()
Release all blocks after the pipe is disabled, even when vsync
didn't happen in some error cases. Allow requesting SMB multiple
times before configuring to hardware, by releasing blocks not
programmed to hardware yet for shrinking case.
This fixes a potential leak of shared memory pool blocks.
Signed-off-by: Wentao Xu <wentaox@codeaurora.org>
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The atomic commit cannot easily undo and return an error once the
state is swapped. Change to uninterruptible wait, and ignore the
timeout error.
Signed-off-by: Wentao Xu <wentaox@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
mdp4_get_frame_format() can dereference a drm_framebuffer when it's NULL.
Call it in mdp4_plane_mode_set only when we know fb is non-NULL.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We need to return a new sgt, since the caller takes ownership of it.
Reported-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
hdp flush is not needed for IBs that dispatched from kernel inside
because there is no video memory host access
Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
compute ring didn't use const engine byfar, so ignore CE things in
compute routine
Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
We recently changed the drm_amdgpu_info_device struct so now there is
a 4 byte hole at the end. We need to initialize it so we don't disclose
secret information from the stack.
Fixes: fa92754e9c ('drm/amdgpu: add VCE harvesting instance query')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we fail during device init, record what state each
block is in so that we can tear down clearly.
Fixes various problems on device init failure.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes a broken hsync start value uncovered by:
abc0b1447d
(drm: Perform basic sanity checks on probed modes)
The driver handled the bad hsync start elsewhere, but
the above commit prevented it from getting added.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91401
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
1. Always assign audio function pointers even if the display does
not support audio. We need to properly disable the audio stream
when when using a non-audio capable monitor. Fixes purple line
on some hdmi monitors.
2. Check if a pin is in use by another encoder before disabling
it.
v2: make sure we've fetched the edid before checking audio and
look up the encoder before calling audio_detect since
connector->encoder may not be assigned yet. Separate
pin and afmt. They are allocated at different times and
have no dependency on eachother.
v3: fix connector fetching in encoder functions
v4: fix missed dig->pin check in dce6_afmt_write_latency_fields
bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=93701https://bugzilla.redhat.com/show_bug.cgi?id=1236337https://bugs.freedesktop.org/show_bug.cgi?id=91041
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Add Maxwell to the switch statement that sets node->memtype, otherwise
all tiling information is ignored for buffers in system memory.
While we are at it, make that switch statement explicitly complain the
next time we meet a non-handled card family.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Userspace has started doing this, which upsets the display class hw
error checking in various unpleasant ways.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Only 58 words get written to the ring, not 59. Also, normalize the accel
init wrt nvc0 and nv04 fbcon impls by firing the ring at accel init time
rather than waiting until "later".
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The RING_SPACE macro accounts how much space is used up so it's
important to ask it for the right amount. Incorrect accounting of this
can cause page faults down the line as writes are attempted outside of
the ring.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
More analysis shows that this is identical to 0x79 except that it loads
the frequency indirectly from elsewhere in the VBIOS.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91025
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Opcode 0x5a is a register write for data looked up from another part of
the VBIOS image. 0x59 is a more complex opcode, but we may as well
recognize it. These occur on a single known instance of Riva TNT2
hardware.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91025
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The return type of exec_lookup() is struct nvkm_output *, so it should
return NULL rather than 0.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There is always the possiblity that the ppm->context pointer would get
partially updated and accidentally would equal ctx. This would allow two
contexts to co-exist, which is not acceptable. Moving the test to the
critical section takes care of this problem.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This fixes a crash when multiple PM engine contexts are created.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
After submitting a GO_IDLE bundle, one must wait for GR to effectively
be idle before submitting the next bundle. Failure to do so may result
in undefined behavior in some rare cases.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reported-by: Kary Jin <karyj@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When emitting the ICMD bundle, wait on the bottom half (bit 3 of the
GR_STATUS register) instead of upper half (bit 2) to make sure methods
are effectively emitted.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Kicking channels is part of their deactivation process. Maxwell chips
are particularly sensitive to this, and can start fetching the previous
pushbuffer of a recycled channel if this is not done.
While we are at it, improve the channel preemption code to only wait for
bit 20 of 0x002634 to turn to 0, as it is the bit indicating a
preempt is pending.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Increase clock timeout for SYS, FPB and GPC in order to avoid operation
failure at high gpcclk rate.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The lack of IOMMU API support can make nouveau_platform_probe_iommu()
fail to compile because struct iommu_ops is then empty. Fix this by
skipping IOMMU probe in that case - lack of IOMMU on platform devices
is sub-optimal, but is not an error.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The memory allocated for a nouveau_cli object in nouveau_cli_create() is
never freed. Free the memory in nouveau_cli_destroy() to plug this leak.
kmemleak recorded this after running a couple of nouveau test programs.
Note that kmemleak points at drm_open_helper() because for some reason
it thinks that skipping the first two stack frames is a good idea.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Regression fix for systemd getting confused about unknown connector state
after resume. Just stop setting the state to unknown, turned out to be a
silly idea anyway. What drivers imo really should do (and i915 still does
that) is forcing a full reprobe on resume to make sure connector changes
while suspended are caught. Most drivers seem to get this wrong. Otoh it
took us years to get fixes merged where some probe races resulted in
eating uevents, I guess userspace expectations for reliable hpd are just
really low :(
* tag 'topic/drm-fixes-2015-07-23' of git://anongit.freedesktop.org/drm-intel:
drm: Stop resetting connector state to unknown
arb_timer kernel side fix from Chris.
* tag 'drm-intel-fixes-2015-07-23' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Use two 32bit reads for select 64bit REG_READ ioctls
Some amdgpu fixes.
* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu/cz/dpm: properly report UVD and VCE clock levels
drm/amdgpu/cz: implement voltage validation properly
drm/amdgpu: add VCE harvesting instance query
drm/amdgpu: implement VCE 3.0 harvesting support (v4)
drm/amdgpu/dce10: Re-set VBLANK interrupt state when enabling a CRTC
drm/amdgpu/dce11: Re-set VBLANK interrupt state when enabling a CRTC
Return proper pgprot for ARM64. This is required for objects like
Nouveau fences to be mapped with expected coherency.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
VCE, UVD DPM work similarly to SCLK DPM. Report the current
clock levels for UVD and VCE via debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CZ uses a different set of registers compared to previous asics
and supports separate NB and GFX planes.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For boards with bad VCE blocks, only configure the working
block.
v2: use the harvest info for pipe setup
v3: fix mask check as noted by Leo
v4: add dGPU support
Reviewed-by: Christian König <christian.koenig@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This doesn't seem strictly necessary with Tonga right now, but that might
change with future power management enhancements.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK
register while the CRTC is off, which caused e.g. glxgears or
gnome-shell to hang after a modeset.
Reviewed-and-Tested-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
It's causing piles of issues since we've stopped forcing full detect
cycles in the sysfs interfaces with
commit c484f02d0f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Mar 6 12:36:42 2015 +0000
drm: Lighten sysfs connector 'status'
The original justification for this was that the hpd handlers could
use the unknown state as a hint to force a full detection. But current
i915 code isn't doing that any more, and no one else really uses reset
on resume. So instead just keep the old state around.
References: http://article.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/62584
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100641
Cc: Rui Matos <tiagomatos@gmail.com>
Cc: Julien Wajsberg <felash@gmail.com>
Cc: kuddel.mail@gmx.de
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: stable@vger.kernel.org
Acked-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rui Tiago Cação Matos <tiagomatos@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Since the hardware sometimes mysteriously totally flummoxes the 64bit
read of a 64bit register when read using a single instruction, split the
read into two instructions. Since the read here is of automatically
incrementing timestamp counters, we also have to be very careful in
order to make sure that it does not increment between the two
instructions.
However, since userspace tried to workaround this issue and so enshrined
this ABI for a broken hardware read and in the process neglected that
the read only fails in some environments, we have to introduce a new
uABI flag for userspace to request the 2x32 bit accurate read of the
timestamp.
v2: Fix alignment check and include details of the workaround for
userspace.
Reported-by: Karol Herbst <freedesktop@karolherbst.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91317
Testcase: igt/gem_reg_read
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: stable@vger.kernel.org
Tested-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_vblank_on() now warns on nested use or if vblank is not properly
initialized. This patch fixes Atmel HLCDC vblank initial state.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Calls to set_memory_wb() incure heavy TLB flush and IPI cost. To
minimize those wait until pool grow beyond batch size before
draining the pool.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-and-Tested-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
