This patch enables Renesas DPCM related sound card.
It is used for...
- Sampline rate convert
- CTU/MIXer
Note: you need to enable these settings on DTS file
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The UniPhier on-chip UART driver was merged into the mainline by
commit 1a8d2903cb ("serial: 8250_uniphier: add UniPhier serial
driver").
Enable it from multi_v7_defconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m0CY
-----END PGP SIGNATURE-----
Merge tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Merge "Allwinner late changes for 4.2" from Maxime Ripard:
Allwinner late changes for 4.2
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.
* tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Enable simplefb in the defconfig
ARM: Remove deprecated symbol from defconfig files
ARM: sunxi: Add Machine support for A33
ARM: sunxi: Introduce Allwinner H3 support
Documentation: sunxi: Update Allwinner SoC documentation
Commit b2b3a8b934 ("power/reset: Remove sun6i reboot driver") removed
the sun6i reboot driver. But sunxi_defconfig and multi_v7_defconfig
still contain the symbol CONFIG_POWER_RESET_SUN6I that was deprecated
by that commit, so remove it.
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Broadcom NAND driver is used by brcmstb, bcm63xx, bcm5301x and
Cygnus/iProc under mach-bcm, this is enough critical mass to enable it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
We keep collecting defconfig updates in a separate branch mostly to encourage
people to handle them separately and avoid conflicts between different topics.
Most of these are enablement of new SoCs, boards or drivers that have
come in, or minor config refreshes due to reorderings in Kconfig
files, etc. I.e. mostly minor churn of various kinds.
Conflicts: None
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q6ks
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' into test-merge
ARM: SoC: defconfig updates for v4.2
We keep collecting defconfig updates in a separate branch mostly to encourage
people to handle them separately and avoid conflicts between different topics.
Most of these are enablement of new SoCs, boards or drivers that have
come in, or minor config refreshes due to reorderings in Kconfig
files, etc. I.e. mostly minor churn of various kinds.
Conflicts: None
# gpg: Signature made Wed Jun 24 21:32:27 2015 PDT using RSA key ID D3FBC665
# gpg: Good signature from "Kevin Hilman <khilman@deeprootsystems.com>"
# gpg: aka "Kevin Hilman <khilman@linaro.org>"
# gpg: aka "Kevin Hilman <khilman@kernel.org>"
commit dcf9a03bff (ARM: multi_v7_defconfig: Enable PMIC and MUIC
drivers for exynos) mistakenly added an duplicate line for
CONFIG_COMMON_CLK_QCOM=y. Remove it.
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Enable the Exynos DSI and S6E8AA0 panel for full X11 display on Trats2.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Since commit 100832abf0 ("usb: isp1760: Make HCD support
optional"), CONFIG_USB_ISP1760_HCD is automatically selected when
needed. Enabling that option in the defconfig is now a no-op, and no
longer enables ISP1760 HCD support.
Re-enable the ISP1760 driver in the defconfig by enabling
USB_ISP1760_HOST_ROLE instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the USB OHCI driver for Exynos SoCs: S5PV210, Exynos4 family,
Exynos5250, Exynos5440 and Exynos542x/5800 family.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable support for Thermal Monitoring Unit present on Exynos SoCs. This
allows detection of overheat and handling this gracefully.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable drivers for PMICs and MUICs present on Exynos-based devices:
- max14577: charger, fuel gauge (max17040), regulator,
used on: Gear 1, Gear 2,
- max77693: charger, fuel gauge (max17042),
used on: Trats2,
- s5m/s2mps: RTC, clock,
used on: Arndale, Arndale Octa, Gear 1, Gear 2
This allows full usage of charging stack on these devices along with RTC
and 32 kHz clocks.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top
Running) mode on Exynos3250, Exynos4210 (coupled), Exynos4x12 and
Exynos5250. Enable it in default configuration to reduce energy
consumption.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Cypress All Points Addressable (APA) I2C Trackpad is used in the
Samsung Exynos 5250 Snow Chromebook. Build the driver as a module so
the device is supported.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The I2C GPIO arbitration driver is used on the Exynos5250 Snow Chromebook
to arbitrate the access to a I2C bus by the Application Processor or a EC.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many Exynos devices have devices attached to their display ports.
This patch enables the needed Kconfig options to support different
configuration such as simple panel, embedded DisplayPort (eDP) to
LVDS bridges and HDMI displays.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The rtc-s3c driver supports a range of S3C series Real-Time-Clocks found
on many Samsung SoCs. Build the driver as a module to support these RTC.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Build the Generic PWM Samsung driver as a module to support PWM
devices used in platforms with a Samsung SoC.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the needed Kconfig options to have support for the ChromeOS EC
I2C transport, I2C tunnel and chardev user-space interface.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the needed kconfig options to have support for Samsung USB 2.0
and USB 3.0 PHY drivers to support the USB PHYs found on Exynos SoCs.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Maxim max77802 Power Management IC is used on many Exynos machines.
Besides a bunch of regulators, this chip has a Real-Time-Clock (RTC)
and 2-channel 32kHz clock outputs.
Enable the kernel config options to have the drivers for these devices
built as a module.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: removing useless REGULATOR_MAX77802 config]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Build the spi-s3c64xx driver as a module to have support for
the SPI controller in several Samsung SoCs.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- fixed regulators for sd/mmc
- addition of AT91 to the multi_v7_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJVWz/rAAoJEAf03oE53VmQ13wH/1G0Ynxs9CKPvw6QRpt+wRkS
yD03sSjihCKF6AD+8nBtwfOpf2PikzSunAyARLAcbQT4I0K9gqOkqIV8JhNM9CD+
DSIMds60wAWxvem9CWVQzDv+NdYjNA/bke3zYhlLsKrelIJiaAxOnc3SfPWTBaTO
tRS1Gsshb+x+KrXNS2lJh3YBRb2PuaPDsM8gE0o9ztRnymGaHYdHiy/SuXDInNZQ
iZY2Q16fjX43SV/2hBlPfKjRzaC7t1+7WSWN12IR+lBq2PvIFEpu2Kh9cdjZmC9m
x5o2lryrQU9VKK5LgajZrPra9NGfnwFqYdCddIo7PvY0kFLWj+YHyIImOD4vSvo=
=qvSQ
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/defconfig
Merge "First batch of defconfig changes for 4.2" from Nicolas Ferre:
- fixed regulators for sd/mmc
- addition of AT91 to the multi_v7_defconfig
* tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: multi_v7_defconfig: Add Atmel SAMA5 family
ARM: at91/defconfig: add CONFIG_REGULATOR_FIXED_VOLTAGE for mmc driver
Conflicts:
arch/arm/configs/multi_v7_defconfig
Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig.
Note that the console will be ttyAT0 instead of the usual ttyS0.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Enable all drivers under CONFIG_ARM_CRYPTO as modules. Enable
CONFIG_KERNEL_MODE_NEON as well so that the modules that either
contain a NEON alternative or consist solely of a NEON (or ARMv8
crypto extensions) accelerated implementation are enabled fully as
well.
Note that the ARMv8 modules will only be built if the detected
toolchain version is recent enough (binutils 2.23 or higher).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The legacy-only USB_RCAR_GEN2_PHY driver was replaced by the DT-only
PHY_RCAR_GEN2 driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add UniPhier, a new citizen in the ARM multi platform.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the digicolor drivers that are already merged as
part of the multi_v7_defconfig file.
[arnd: change rtc and i2c to loadable modules]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We keep collecting defconfig updates in a separate branch mostly to encourage
people to handle them separately and avoid conflicts between different topics.
Most of these are enablement of new drivers that have come in, or minor config
refreshes due to reorderings in Kconfig files, etc. I.e. mostly minor churn
of various kinds.
We might start folding this branch into something else for upstream merge
since it's so small, but keep it independent in our own tree for the above
reasons.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=W1j4
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep collecting defconfig updates in a separate branch mostly to
encourage people to handle them separately and avoid conflicts between
different topics.
Most of these are enablement of new drivers that have come in, or
minor config refreshes due to reorderings in Kconfig files, etc. I.e.
mostly minor churn of various kinds.
We might start folding this branch into something else for upstream
merge since it's so small, but keep it independent in our own tree for
the above reasons"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
ARM: multi_v7_defconfig: enable alpine platform
ARM: multi_v7_defconfig: Add gpio-restart driver
ARM: multi_v7_defconfig: Build the Marvell WiFi-Ex driver as a module
ARM: multi_v7_defconfig: Enable support for ELAN i2c trackpads
ARM: multi_v7_defconfig: Enable Tegra ACTMON support
ARM: configs: remove all CONFIG_RCAR_AUDMAC_PP from ARM defconfigs
ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig
ARM: exynos_defconfig: Enable HDMI support
ARM: exynos_defconfig: Enable options to mount a rootfs via NFS
ARM: qcom: Increase MMC_BLOCK_MINORS in defconfig
ARM: mvebu: Enable perf support in mvebu_v7_defconfig
ARM: exynos_defconfig: Enable ChromeOS EC chardev driver
ARM: exynos_defconfig: Enable CPU idle
ARM: exynos_defconfig: Enable Marvell WiFi-Ex support
arm: qcom: Update defconfig
arm: qcom: Enable lpass clock driver in defconfig
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules
ARM: omap2plus_defconfig: Update bluetooth options
ARM: omap2plus_defconfig: Enable leds-pwm
ARM: omap1_defconfig: drop obsolete Kconfig symbols
...
The generic PCI driver is required for SATA device probe on Alpine platform,
so it cannot be modular.
Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Needed in several Chromebook models such as the Tegra-based ones.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Needed in several Chromebook models such as the Tegra-based ones.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This brings the DevFreq framework in and builds the ACTMON driver that
on Tegra124 will scale the external memory clock based on current load.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
