During an out-of-tree build, attempting to install the $(TEST_FILES)
into the $(OUTPUT) directory fails, because the objects were already
generated into $(OUTPUT):
rsync: [sender] link_stat "tools/testing/selftests/bpf/test_lwt_ip_encap.o" failed: No such file or directory (2)
rsync: [sender] link_stat "tools/testing/selftests/bpf/test_tc_edt.o" failed: No such file or directory (2)
Use $(TEST_GEN_FILES) instead.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210113163319.1516382-4-jean-philippe@linaro.org
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Pass conntrack -f to specify family in netfilter conntrack helper
selftests, from Chen Yi.
2) Honor hashsize modparam from nf_conntrack_buckets sysctl,
from Jesper D. Brouer.
3) Fix memleak in nf_nat_init() error path, from Dinghao Liu.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nf_nat: Fix memleak in nf_nat_init
netfilter: conntrack: fix reading nf_conntrack_buckets
selftests: netfilter: Pass family parameter "-f" to conntrack tool
====================
Link: https://lore.kernel.org/r/20210112222033.9732-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If some of the subtests use module BTFs through ksyms, they will cause
bpf_prog to take a refcount on bpf_testmod module, which will prevent it from
successfully unloading. Module's refcnt is decremented when bpf_prog is freed,
which generally happens in RCU callback. So we need to trigger
syncronize_rcu() in the kernel, which can be achieved nicely with
membarrier(MEMBARRIER_CMD_SHARED) or membarrier(MEMBARRIER_CMD_GLOBAL) syscall.
So do that in kernel_sync_rcu() and make it available to other test inside the
test_progs. This synchronize_rcu() is called before attempting to unload
bpf_testmod.
Fixes: 9f7fa22589 ("selftests/bpf: Add bpf_testmod kernel module for testing")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-5-andrii@kernel.org
RCU's rcutree.use_softirq=0 kernel boot parameter substitutes the per-CPU
rcuc kthreads for softirq, which is used in real-time installations.
However, none of the rcutorture scenarios test this parameter.
This commit therefore adds rcutree.use_softirq=0 to the RUDE01 and
TASKS01 rcutorture scenarios, both of which indirectly exercise RCU.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It was found in [1] that bpf_inode_storage_get helper did not check
the nullness of the passed owner ptr which caused an oops when
dereferenced. This change incorporates the example suggested in [1] into
the local storage selftest.
The test is updated to create a temporary directory instead of just
using a tempfile. In order to replicate the issue this copied rm binary
is renamed tiggering the inode_rename with a null pointer for the
new_inode. The logic to verify the setting and deletion of the inode
local storage of the old inode is also moved to this LSM hook.
The change also removes the copy_rm function and simply shells out
to copy files and recursively delete directories and consolidates the
logic of setting the initial inode storage to the bprm_committed_creds
hook and removes the file_open hook.
[1]: https://lore.kernel.org/bpf/CANaYP3HWkH91SN=wTNO9FL_2ztHfqcXKX38SSE-JJ2voh+vssw@mail.gmail.com
Suggested-by: Gilad Reti <gilad.reti@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075525.256820-2-kpsingh@kernel.org
Fix nft_conntrack_helper.sh false fail report:
1) Conntrack tool need "-f ipv6" parameter to show out ipv6 traffic items.
2) Sleep 1 second after background nc send packet, to make sure check
is after this statement executed.
False report:
FAIL: ns1-lkjUemYw did not show attached helper ip set via ruleset
PASS: ns1-lkjUemYw connection on port 2121 has ftp helper attached
...
After fix:
PASS: ns1-2hUniwU2 connection on port 2121 has ftp helper attached
PASS: ns2-2hUniwU2 connection on port 2121 has ftp helper attached
...
Fixes: 619ae8e069 ("selftests: netfilter: add test case for conntrack helper assignment")
Signed-off-by: Chen Yi <yiche@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch added the MP_PRIO testcases:
Add a new argument bkup for run_tests and do_transfer, it can be set as
"backup" or "nobackup", the default value is "".
Add a new function chk_prio_nr to check the MP_PRIO related MIB counters.
The output looks like this:
29 single subflow, backup syn[ ok ] - synack[ ok ] - ack[ ok ]
ptx[ ok ] - prx [ ok ]
30 single address, backup syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
ptx[ ok ] - prx [ ok ]
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the set_flags command in pm_nl_ctl, currently we can only
set two flags: backup and nobackup. The set_flags command can be used like
this:
# pm_nl_ctl set 10.0.0.1 flags backup
# pm_nl_ctl set 10.0.0.1 flags nobackup
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the address ID can be set from user-space, some of the tests in
pm_netlink.sh will fail. This patch fixed the failures, and add the
testcases for setting the address ID.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull kunit fixes from Shuah Khan:
"One fix to force the use of the 'tty' console for UML.
Given that kunit tool requires the console output, explicitly stating
the dependency makes sense than relying on it being the default"
* tag 'linux-kselftest-kunit-fixes-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Force the use of the 'tty' console for UML
Pull kselftest fixes from Shuah Khan:
"Two minor fixes to vDSO test changes in this merge window"
* tag 'linux-kselftest-next-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/vDSO: fix -Wformat warning in vdso_test_correctness
selftests/vDSO: add additional binaries to .gitignore
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for the new scalable MMU
- Fixes for migration of nested hypervisors on AMD
- Fix for clang integrated assembler
- Fix for left shift by 64 (UBSAN)
- Small cleanups
- Straggler SEV-ES patch
ARM:
- VM init cleanups
- PSCI relay cleanups
- Kill CONFIG_KVM_ARM_PMU
- Fixup __init annotations
- Fixup reg_to_encoding()
- Fix spurious PMCR_EL0 access
Misc:
- selftests cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (38 commits)
KVM: x86: __kvm_vcpu_halt can be static
KVM: SVM: Add support for booting APs in an SEV-ES guest
KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit
KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest mode
KVM: nSVM: correctly restore nested_run_pending on migration
KVM: x86/mmu: Clarify TDP MMU page list invariants
KVM: x86/mmu: Ensure TDP MMU roots are freed after yield
kvm: check tlbs_dirty directly
KVM: x86: change in pv_eoi_get_pending() to make code more readable
MAINTAINERS: Really update email address for Sean Christopherson
KVM: x86: fix shift out of bounds reported by UBSAN
KVM: selftests: Implement perf_test_util more conventionally
KVM: selftests: Use vm_create_with_vcpus in create_vm
KVM: selftests: Factor out guest mode code
KVM/SVM: Remove leftover __svm_vcpu_run prototype from svm.c
KVM: SVM: Add register operand to vmsave call in sev_es_vcpu_load
KVM: x86/mmu: Optimize not-present/MMIO SPTE check in get_mmio_spte()
KVM: x86/mmu: Use raw level to index into MMIO walks' sptes array
KVM: x86/mmu: Get root level from walkers when retrieving MMIO SPTE
KVM: x86/mmu: Use -1 to flag an undefined spte in get_mmio_spte()
...
For IPv6 traffic, mausezahn needs to be invoked with '-6'. Otherwise an
error is returned:
# ip netns exec me mausezahn veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn"
Failed to set source IPv4 address. Please check if source is set to a valid IPv4 address.
Invalid command line parameters!
Fixes: 7c741868ce ("selftests: Add torture tests to nexthop tests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-01-07
We've added 4 non-merge commits during the last 10 day(s) which contain
a total of 4 files changed, 14 insertions(+), 7 deletions(-).
The main changes are:
1) Fix task_iter bug caused by the merge conflict resolution, from Yonghong.
2) Fix resolve_btfids for multiple type hierarchies, from Jiri.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpftool: Fix compilation failure for net.o with older glibc
tools/resolve_btfids: Warn when having multiple IDs for single type
bpf: Fix a task_iter bug caused by a merge conflict resolution
selftests/bpf: Fix a compile error for BPF_F_BPRM_SECUREEXEC
====================
Link: https://lore.kernel.org/r/20210107221555.64959-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adds new 2 new tests to the PTMU script: pmtu_ipv4/6_route_change.
These tests explicitly test for a recently discovered problem in the
IPv6 routing framework where PMTU exceptions were not properly released
when replacing a route via "ip route change ...".
After creating PMTU exceptions, the route from the device A to R1 will be
replaced with a new route, then device A will be deleted. If the PMTU
exceptions were properly cleaned up by the kernel, this device deletion
will succeed. Otherwise, the unregistration of the device will stall, and
messages such as the following will be logged in dmesg:
unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 4
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/1609892546-11389-2-git-send-email-stranche@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sizes of vmlinux files built with KASAN enabled can approach a full
gigabyte, which can result in disk overflow sooner rather than later.
Fortunately, the xz command compresses them by almost an order of
magnitude. This commit therefore uses xz to compress vmlinux file built
by torture.sh with KASAN enabled.
However, xz is not the fastest thing in the world. In fact, it is way
slower than rotating-rust mass storage. This commit therefore also adds a
--compress-kasan-vmlinux argument to specify the degree of xz concurrency,
which defaults to using all available CPUs if there are that many files in
need of compression.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In 2020, running KCSAN often requires careful choice of compiler.
This commit therefore adds a --kcsan-kmake-arg parameter to torture.sh
to allow specifying (for example) "CC=clang" to the kernel build process
to correctly build a KCSAN-enabled kernel.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the command and arguments to the torture.sh log file, and
also outputs the results directory. This latter allows impatient users
to quickly find the results that are being generated by the current run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds --configs-rcutorture, --configs-locktorture, and
--configs-scftorture arguments to torture.sh, allowing the desired
set of scenarios to be passed to each. The default for each has been
changed from a large-system-appropriate set to just CFLIST for each.
Users are encouraged to create scripts that provide appropriate settings
for their specific systems.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that kvm.sh puts all the relevant details in the "log" file,
there is no need for torture.sh to generate a separate "log.long"
file. This commit therefore drops this from torture.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes torture.sh to check for zero-length runs and to take
the cowardly option of refusing to run them, logging its cowardice for
later inspection.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes torture.sh to use the torture.verbose_sleep_frequency
kernel boot parameter to throttle verbose refscale output on large systems.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit places "---" markers in the torture.sh script's allmodconfig
output, and uses "<<" to avoid overwriting earlier output from this
build test.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit saves a few lines of code by creating a doyesno helper bash
function for argument parsing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On large systems, the refscale printk() rate can overrun the file system's
ability to accept console log messages. This commit therefore uses the
new verbose_batched module parameter to rate-limit some of the higher-rate
printk() calls.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The .mod.c files created by allmodconfig builds interfers with the approach
torture.sh uses to enumerate types of rcuscale and refscale runs. This
commit therefore tightens the pattern matching to avoid this interference.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit uncomments the argument checking for the --duration argument
to torture.sh. While in the area, it also corrects the duration units
from seconds to minutes.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit improves torture.sh flexibility by autoscaling the number
of CPUs to be used in variable-CPUs torture tests, including scftorture,
refscale, rcuscale, and kvfree.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the ability to do "make allmodconfig" to torture.sh,
given that normal rcutorture runs do not normally catch missing exports.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The bash "eval" command enables Bobby Tables attacks, which might not
be a concern in torture testing by themselves, but one could imagine
these combined with a cut-and-paste attack. This commit therefore gets
rid of them. This comes at a price in terms of bash quoting not working
nicely, so the "--bootargs" argument lists are now passed to torture_one
via a bash-variable side channel. This might be a bit ugly, but it will
also allow torture.sh to grow its own --bootargs parameter.
While in the area, add proper header comments for the bash functions.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit makes torture.sh use the new bash functions get_starttime()
and get_starttime_duration() created for kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although tailoring a specific set of kvm.sh runs has served rcutorture
testing well over many years, it requires a relatively distraction-free
environment, which is not always available. This commit therefore
adds a prototype torture.sh script that by default tortures pretty much
everything the rcutorture scripting is designed to torture, and which
can be given command-line arguments to take a more focused approach.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The udpgro.sh will always return 0 (unless the bpf selftest was not
build first) even if there are some failed sub test-cases.
Therefore the kselftest framework will report this case is OK.
Check and return the exit status of each test to make it easier to
spot real failures.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, wireless and bpf
trees.
Current release - regressions:
- mt76: fix NULL pointer dereference in mt76u_status_worker and
mt76s_process_tx_queue
- net: ipa: fix interconnect enable bug
Current release - always broken:
- netfilter: fixes possible oops in mtype_resize in ipset
- ath11k: fix number of coding issues found by static analysis tools
and spurious error messages
Previous releases - regressions:
- e1000e: re-enable s0ix power saving flows for systems with the
Intel i219-LM Ethernet controllers to fix power use regression
- virtio_net: fix recursive call to cpus_read_lock() to avoid a
deadlock
- ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
- sysfs: take the rtnl lock around XPS configuration
- xsk: fix memory leak for failed bind and rollback reservation at
NETDEV_TX_BUSY
- r8169: work around power-saving bug on some chip versions
Previous releases - always broken:
- dcb: validate netlink message in DCB handler
- tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
to prevent unnecessary retries
- vhost_net: fix ubuf refcount when sendmsg fails
- bpf: save correct stopping point in file seq iteration
- ncsi: use real net-device for response handler
- neighbor: fix div by zero caused by a data race (TOCTOU)
- bareudp: fix use of incorrect min_headroom size and a false
positive lockdep splat from the TX lock
- mvpp2:
- clear force link UP during port init procedure in case
bootloader had set it
- add TCAM entry to drop flow control pause frames
- fix PPPoE with ipv6 packet parsing
- fix GoP Networking Complex Control config of port 3
- fix pkt coalescing IRQ-threshold configuration
- xsk: fix race in SKB mode transmit with shared cq
- ionic: account for vlan tag len in rx buffer len
- stmmac: ignore the second clock input, current clock framework does
not handle exclusive clock use well, other drivers may reconfigure
the second clock
Misc:
- ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
existing scheme"
* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
r8169: work around power-saving bug on some chip versions
net: usb: qmi_wwan: add Quectel EM160R-GL
selftests: mlxsw: Set headroom size of correct port
net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
ibmvnic: fix: NULL pointer dereference.
docs: networking: packet_mmap: fix old config reference
docs: networking: packet_mmap: fix formatting for C macros
vhost_net: fix ubuf refcount incorrectly when sendmsg fails
bareudp: Fix use of incorrect min_headroom size
bareudp: set NETIF_F_LLTX flag
net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
atlantic: remove architecture depends
erspan: fix version 1 check in gre_parse_header()
net: hns: fix return value check in __lb_other_process()
net: sched: prevent invalid Scell_log shift count
net: neighbor: fix a crash caused by mod zero
ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
...
Currently, if a scenario is repeated as in "--configs '4*TREE01'",
the Kconfig analysis is performed for each occurrance (four times in
this example) and each analysis places the exact same data into the
exact same files. This is not really an issue in this repetition-four
example, but it can needlessly consume tens of seconds of wallclock time
for something like "--config '128*TINY01'".
This commit therefore does Kconfig analysis only once per set of
repeats of a given scenario, courtesy of the "sort -u" command and an
automatically generated awk script.
While in the area, this commit also wordsmiths a comment.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
