Like other filesystem does, we introduce a new file f2fs.h in path of
include/uapi/linux/, and move f2fs-specified ioctl interface definitions
to that file, after then, in order to use those definitions, userspace
developer only need to include the new header file rather than
copy & paste definitions from fs/f2fs/f2fs.h.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull char/misc fixes/removals from Greg KH:
"Here's some small fixes for 5.10-rc2 and a big driver removal.
The fixes are for some reported issues in the interconnect and
coresight drivers, nothing major.
The "big" driver removal is the MIC drivers have been asked to be
removed as the hardware never shipped and Intel no longer wants to
maintain something that no one can use. This is welcomed by many as
the DMA usage of these drivers was "interesting" and the security
people were starting to question some issues that were starting to be
found in the codebase.
Note, one of the subsystems for this driver, the "VOP" code, will
probably come back in future kernel versions as it was looking to
potentially solve some PCIe virtualization issues that a number of
other vendors were wanting to solve. But as-is, this codebase didn't
work for anyone else so no actual functionality is being removed.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
coresight: cti: Initialize dynamic sysfs attributes
coresight: Fix uninitialised pointer bug in etm_setup_aux()
coresight: add module license
misc: mic: remove the MIC drivers
interconnect: qcom: use icc_sync state for sm8[12]50
interconnect: qcom: Ensure that the floor bandwidth value is enforced
interconnect: qcom: sc7180: Init BCMs before creating the nodes
interconnect: qcom: sdm845: Init BCMs before creating the nodes
interconnect: Aggregate before setting initial bandwidth
interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM
Pull vhost fixes from Michael Tsirkin:
"Fixes all over the place.
A new UAPI is borderline: can also be considered a new feature but
also seems to be the only way we could come up with to fix addressing
for userspace - and it seems important to switch to it now before
userspace making assumptions about addressing ability of devices is
set in stone"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpasim: allow to assign a MAC address
vdpasim: fix MAC address configuration
vdpa: handle irq bypass register failure case
vdpa_sim: Fix DMA mask
Revert "vhost-vdpa: fix page pinning leakage in error path"
vdpa/mlx5: Fix error return in map_direct_mr()
vhost_vdpa: Return -EFAULT if copy_from_user() fails
vdpa_sim: implement get_iova_range()
vhost: vdpa: report iova range
vdpa: introduce config op to get valid iova range
Based on RFC7112, Section 6:
IANA has added the following "Type 4 - Parameter Problem" message to
the "Internet Control Message Protocol version 6 (ICMPv6) Parameters"
registry:
CODE NAME/DESCRIPTION
3 IPv6 First Fragment has incomplete IPv6 Header Chain
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It makes possible to reproduce exactly the same set after a save/restore.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The parameter defines the upper limit in any hash bucket at adding new entries
from userspace - if the limit would be exceeded, ipset doubles the hash size
and rehashes. It means the set may consume more memory but gives faster
evaluation at matching in the set.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Extend the bridge multicast control and data path to configure routes
for L2 (non-IP) multicast groups.
The uapi struct br_mdb_entry union u is extended with another variant,
mac_addr, which does not change the structure size, and which is valid
when the proto field is zero.
To be compatible with the forwarding code that is already in place,
which acts as an IGMP/MLD snooping bridge with querier capabilities, we
need to declare that for L2 MDB entries (for which there exists no such
thing as IGMP/MLD snooping/querying), that there is always a querier.
Otherwise, these entries would be flooded to all bridge ports and not
just to those that are members of the L2 multicast group.
Needless to say, only permanent L2 multicast groups can be installed on
a bridge port.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201028233831.610076-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is to implement:
rfc6951#section-6.1: Get or Set the Remote UDP Encapsulation Port Number
with the param of the struct:
struct sctp_udpencaps {
sctp_assoc_t sue_assoc_id;
struct sockaddr_storage sue_address;
uint16_t sue_port;
};
the encap_port of sock, assoc or transport can be changed by users,
which also means it allows the different transports of the same asoc
to have different encap_port value.
v1->v2:
- no change.
v2->v3:
- fix the endian warning when setting values between encap_port and
sue_port.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds modifiers for GFX9+ AMD GPUs.
As the modifiers need a lot of parameters I split things out in
getters and setters.
- Advantage: simplifies the code a lot
- Disadvantage: Makes it harder to check that you're setting all
the required fields.
The tiling modes seem to change every generation, but the structure
of what each tiling mode is good for stays really similar. As such
the core of the modifier is
- the tiling mode
- a version. Not explicitly a GPU generation, but splitting out
a new set of tiling equations.
Sometimes one or two tiling modes stay the same and for those we
specify a canonical version.
Then we have a bunch of parameters on how the compression works.
Different HW units have different requirements for these and we
actually have some conflicts here.
e.g. the render backends need a specific alignment but the display
unit only works with unaligned compression surfaces. To work around
that we have a DCC_RETILE option where both an aligned and unaligned
compression surface are allocated and a writer has to sync the
aligned surface to the unaligned surface on handoff.
Finally there are some GPU parameters that participate in the tiling
equations. These are constant for each GPU on the rendering/texturing
side. The display unit is very flexible however and supports all
of them :|
Some estimates:
- Single GPU, render+texture: ~10 modifiers
- All possible configs in a gen, display: ~1000 modifiers
- Configs of actually existing GPUs in a gen: ~100 modifiers
For formats with a single plane everything gets put in a separate
DRM plane. However, this doesn't fit for some YUV formats, so if
the format has >1 plane, we let the driver pack the surfaces into
1 DRM plane per format plane.
This way we avoid X11 rendering onto the frontbuffer with DCC, but
still fit into 4 DRM planes.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arnd Bergmann says:
====================
wimax: move to staging
After I sent a fix for what appeared to be a harmless warning in
the wimax user interface code, the conclusion was that the whole
thing has most likely not been used in a very long time, and the
user interface possibly been broken since b61a5eea59 ("wimax: use
genl_register_family_with_ops()").
Using a shared branch between net-next and staging should help
coordinate patches getting submitted against it.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the implementation of CFM netlink status
get information interface.
Add new nested netlink attributes. These attributes are used by the
user space to get status information.
GETLINK:
Request filter RTEXT_FILTER_CFM_STATUS:
Indicating that CFM status information must be delivered.
IFLA_BRIDGE_CFM:
Points to the CFM information.
IFLA_BRIDGE_CFM_MEP_STATUS_INFO:
This indicate that the MEP instance status are following.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO:
This indicate that the peer MEP status are following.
CFM nested attribute has the following attributes in next level.
GETLINK RTEXT_FILTER_CFM_STATUS:
IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE:
The MEP instance number of the delivered status.
The type is u32.
IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN:
The MEP instance received CFM PDU with unexpected Opcode.
The type is u32 (bool).
IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN:
The MEP instance received CFM PDU with unexpected version.
The type is u32 (bool).
IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN:
The MEP instance received CCM PDU with MD level lower than
configured level. This frame is discarded.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE:
The MEP instance number of the delivered status.
The type is u32.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID:
The added Peer MEP ID of the delivered status.
The type is u32.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT:
The CCM defect status.
The type is u32 (bool).
True means no CCM frame is received for 3.25 intervals.
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI:
The last received CCM PDU RDI.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE:
The last received CCM PDU Port Status TLV value field.
The type is u8.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE:
The last received CCM PDU Interface Status TLV value field.
The type is u8.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN:
A CCM frame has been received from Peer MEP.
The type is u32 (bool).
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN:
A CCM frame with TLV has been received from Peer MEP.
The type is u32 (bool).
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN:
A CCM frame with unexpected sequence number has been received
from Peer MEP.
The type is u32 (bool).
When a sequence number is not one higher than previously received
then it is unexpected.
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the implementation of CFM netlink configuration
get information interface.
Add new nested netlink attributes. These attributes are used by the
user space to get configuration information.
GETLINK:
Request filter RTEXT_FILTER_CFM_CONFIG:
Indicating that CFM configuration information must be delivered.
IFLA_BRIDGE_CFM:
Points to the CFM information.
IFLA_BRIDGE_CFM_MEP_CREATE_INFO:
This indicate that MEP instance create parameters are following.
IFLA_BRIDGE_CFM_MEP_CONFIG_INFO:
This indicate that MEP instance config parameters are following.
IFLA_BRIDGE_CFM_CC_CONFIG_INFO:
This indicate that MEP instance CC functionality
parameters are following.
IFLA_BRIDGE_CFM_CC_RDI_INFO:
This indicate that CC transmitted CCM PDU RDI
parameters are following.
IFLA_BRIDGE_CFM_CC_CCM_TX_INFO:
This indicate that CC transmitted CCM PDU parameters are
following.
IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO:
This indicate that the added peer MEP IDs are following.
CFM nested attribute has the following attributes in next level.
GETLINK RTEXT_FILTER_CFM_CONFIG:
IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
The created MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
The created MEP domain.
The type is u32 (br_cfm_domain).
It must be BR_CFM_PORT.
This means that CFM frames are transmitted and received
directly on the port - untagged. Not in a VLAN.
IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
The created MEP direction.
The type is u32 (br_cfm_mep_direction).
It must be BR_CFM_MEP_DIRECTION_DOWN.
This means that CFM frames are transmitted and received on
the port. Not in the bridge.
IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
The created MEP residence port ifindex.
The type is u32 (ifindex).
IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
The deleted MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
The configured MEP unicast MAC address.
The type is 6*u8 (array).
This is used as SMAC in all transmitted CFM frames.
IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
The configured MEP unicast MD level.
The type is u32.
It must be in the range 1-7.
No CFM frames are passing through this MEP on lower levels.
IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
The configured MEP ID.
The type is u32.
It must be in the range 0-0x1FFF.
This MEP ID is inserted in any transmitted CCM frame.
IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
The Continuity Check (CC) functionality is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
The CC expected receive interval of CCM frames.
The type is u32 (br_cfm_ccm_interval).
This is also the transmission interval of CCM frames when enabled.
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
The CC expected receive MAID in CCM frames.
The type is CFM_MAID_LENGTH*u8.
This is MAID is also inserted in transmitted CCM frames.
IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_PEER_MEPID:
The CC Peer MEP ID added.
The type is u32.
When a Peer MEP ID is added and CC is enabled it is expected to
receive CCM frames from that Peer MEP.
IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_RDI_RDI:
The RDI that is inserted in transmitted CCM PDU.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
The transmitted CCM frame destination MAC address.
The type is 6*u8 (array).
This is used as DMAC in all transmitted CFM frames.
IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
The transmitted CCM frame update (increment) of sequence
number is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
The period of time where CCM frame are transmitted.
The type is u32.
The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
must be done before timeout to keep transmission alive.
When period is zero any ongoing CCM frame transmission
will be stopped.
IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
The transmitted CCM frame update with Interface Status TLV
is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
The transmitted Interface Status TLV value field.
The type is u8.
IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
The transmitted CCM frame update with Port Status TLV is enabled
or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
The transmitted Port Status TLV value field.
The type is u8.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the implementation of CFM netlink configuration
set information interface.
Add new nested netlink attributes. These attributes are used by the
user space to create/delete/configure CFM instances.
SETLINK:
IFLA_BRIDGE_CFM:
Indicate that the following attributes are CFM.
IFLA_BRIDGE_CFM_MEP_CREATE:
This indicate that a MEP instance must be created.
IFLA_BRIDGE_CFM_MEP_DELETE:
This indicate that a MEP instance must be deleted.
IFLA_BRIDGE_CFM_MEP_CONFIG:
This indicate that a MEP instance must be configured.
IFLA_BRIDGE_CFM_CC_CONFIG:
This indicate that a MEP instance Continuity Check (CC)
functionality must be configured.
IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD:
This indicate that a CC Peer MEP must be added.
IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE:
This indicate that a CC Peer MEP must be removed.
IFLA_BRIDGE_CFM_CC_CCM_TX:
This indicate that the CC transmitted CCM PDU must be configured.
IFLA_BRIDGE_CFM_CC_RDI:
This indicate that the CC transmitted CCM PDU RDI must be
configured.
CFM nested attribute has the following attributes in next level.
SETLINK RTEXT_FILTER_CFM_CONFIG:
IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
The created MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
The created MEP domain.
The type is u32 (br_cfm_domain).
It must be BR_CFM_PORT.
This means that CFM frames are transmitted and received
directly on the port - untagged. Not in a VLAN.
IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
The created MEP direction.
The type is u32 (br_cfm_mep_direction).
It must be BR_CFM_MEP_DIRECTION_DOWN.
This means that CFM frames are transmitted and received on
the port. Not in the bridge.
IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
The created MEP residence port ifindex.
The type is u32 (ifindex).
IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
The deleted MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
The configured MEP unicast MAC address.
The type is 6*u8 (array).
This is used as SMAC in all transmitted CFM frames.
IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
The configured MEP unicast MD level.
The type is u32.
It must be in the range 1-7.
No CFM frames are passing through this MEP on lower levels.
IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
The configured MEP ID.
The type is u32.
It must be in the range 0-0x1FFF.
This MEP ID is inserted in any transmitted CCM frame.
IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
The Continuity Check (CC) functionality is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
The CC expected receive interval of CCM frames.
The type is u32 (br_cfm_ccm_interval).
This is also the transmission interval of CCM frames when enabled.
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
The CC expected receive MAID in CCM frames.
The type is CFM_MAID_LENGTH*u8.
This is MAID is also inserted in transmitted CCM frames.
IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_PEER_MEPID:
The CC Peer MEP ID added.
The type is u32.
When a Peer MEP ID is added and CC is enabled it is expected to
receive CCM frames from that Peer MEP.
IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_RDI_RDI:
The RDI that is inserted in transmitted CCM PDU.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
The transmitted CCM frame destination MAC address.
The type is 6*u8 (array).
This is used as DMAC in all transmitted CFM frames.
IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
The transmitted CCM frame update (increment) of sequence
number is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
The period of time where CCM frame are transmitted.
The type is u32.
The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
must be done before timeout to keep transmission alive.
When period is zero any ongoing CCM frame transmission
will be stopped.
IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
The transmitted CCM frame update with Interface Status TLV
is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
The transmitted Interface Status TLV value field.
The type is u8.
IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
The transmitted CCM frame update with Port Status TLV is enabled
or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
The transmitted Port Status TLV value field.
The type is u8.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the third commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.
Functionality is extended with CCM frame reception.
The MEP instance now contains CCM based status information.
Most important is the CCM defect status indicating if correct
CCM frames are received with the expected interval.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the second commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.
Functionality is extended with CCM frame transmission.
Interface is extended with these functions:
br_cfm_cc_rdi_set()
br_cfm_cc_ccm_tx()
br_cfm_cc_config_set()
A MEP Continuity Check feature can be configured by
br_cfm_cc_config_set()
The Continuity Check parameters can be configured to be used when
transmitting CCM.
A MEP can be configured to start or stop transmission of CCM frames by
br_cfm_cc_ccm_tx()
The CCM will be transmitted for a selected period in seconds.
Must call this function before timeout to keep transmission alive.
A MEP transmitting CCM can be configured with inserted RDI in PDU by
br_cfm_cc_rdi_set()
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the first commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.
It contains MEP instance create, delete and configuration.
Connectivity Fault Management (CFM) comprises capabilities for
detecting, verifying, and isolating connectivity failures in
Virtual Bridged Networks. These capabilities can be used in
networks operated by multiple independent organizations, each
with restricted management access to each others equipment.
CFM functions are partitioned as follows:
- Path discovery
- Fault detection
- Fault verification and isolation
- Fault notification
- Fault recovery
Interface consists of these functions:
br_cfm_mep_create()
br_cfm_mep_delete()
br_cfm_mep_config_set()
br_cfm_cc_config_set()
br_cfm_cc_peer_mep_add()
br_cfm_cc_peer_mep_remove()
A MEP instance is created by br_cfm_mep_create()
-It is the Maintenance association End Point
described in 802.1Q section 19.2.
-It is created on a specific level (1-7) and is assuring
that no CFM frames are passing through this MEP on lower levels.
-It initiates and validates CFM frames on its level.
-It can only exist on a port that is related to a bridge.
-Attributes given cannot be changed until the instance is
deleted.
A MEP instance can be deleted by br_cfm_mep_delete().
A created MEP instance has attributes that can be
configured by br_cfm_mep_config_set().
A MEP Continuity Check feature can be configured by
br_cfm_cc_config_set()
The Continuity Check Receiver state machine can be
enabled and disabled.
According to 802.1Q section 19.2.8
A MEP can have Peer MEPs added and removed by
br_cfm_cc_peer_mep_add() and br_cfm_cc_peer_mep_remove()
The Continuity Check feature can maintain connectivity
status on each added Peer MEP.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are no known users of this driver as of October 2020, and it will
be removed unless someone turns out to still need it in future releases.
According to https://en.wikipedia.org/wiki/List_of_WiMAX_networks, there
have been many public wimax networks, but it appears that many of these
have migrated to LTE or discontinued their service altogether.
As most PCs and phones lack WiMAX hardware support, the remaining
networks tend to use standalone routers. These almost certainly
run Linux, but not a modern kernel or the mainline wimax driver stack.
NetworkManager appears to have dropped userspace support in 2015
https://bugzilla.gnome.org/show_bug.cgi?id=747846, the
www.linuxwimax.org
site had already shut down earlier.
WiMax is apparently still being deployed on airport campus networks
("AeroMACS"), but in a frequency band that was not supported by the old
Intel 2400m (used in Sandy Bridge laptops and earlier), which is the
only driver using the kernel's wimax stack.
Move all files into drivers/staging/wimax, including the uapi header
files and documentation, to make it easier to remove it when it gets
to that. Only minimal changes are made to the source files, in order
to make it possible to port patches across the move.
Also remove the MAINTAINERS entry that refers to a broken mailing
list and website.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Suggested-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When studying code layout, it is useful to capture the page size of the
sampled code address.
Add a new sample type for code page size.
The new sample type requires collecting the ip. The code page size can
be calculated from the NMI-safe perf_get_page_size().
For large PEBS, it's very unlikely that the mapping is gone for the
earlier PEBS records. Enable the feature for the large PEBS. The worst
case is that page-size '0' is returned.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201001135749.2804-5-kan.liang@linux.intel.com
Current perf can report both virtual addresses and physical addresses,
but not the MMU page size. Without the MMU page size information of the
utilized page, users cannot decide whether to promote/demote large pages
to optimize memory usage.
Add a new sample type for the data MMU page size.
Current perf already has a facility to collect data virtual addresses.
A page walker is required to walk the pages tables and calculate the
MMU page size from a given virtual address.
On some platforms, e.g., X86, the page walker is invoked in an NMI
handler. So the page walker must be NMI-safe and low overhead. Besides,
the page walker should work for both user and kernel virtual address.
The existing generic page walker, e.g., walk_page_range_novma(), is a
little bit complex and doesn't guarantee the NMI-safe. The follow_page()
is only for user-virtual address.
Add a new function perf_get_page_size() to walk the page tables and
calculate the MMU page size. In the function:
- Interrupts have to be disabled to prevent any teardown of the page
tables.
- For user space threads, the current->mm is used for the page walker.
For kernel threads and the like, the current->mm is NULL. The init_mm
is used for the page walker. The active_mm is not used here, because
it can be NULL.
Quote from Peter Zijlstra,
"context_switch() can set prev->active_mm to NULL when it transfers it
to @next. It does this before @current is updated. So an NMI that
comes in between this active_mm swizzling and updating @current will
see !active_mm."
- The MMU page size is calculated from the page table level.
The method should work for all architectures, but it has only been
verified on X86. Should there be some architectures, which support perf,
where the method doesn't work, it can be fixed later separately.
Reporting the wrong page size would not be fatal for the architecture.
Some under discussion features may impact the method in the future.
Quote from Dave Hansen,
"There are lots of weird things folks are trying to do with the page
tables, like Address Space Isolation. For instance, if you get a
perf NMI when running userspace, current->mm->pgd is *different* than
the PGD that was in use when userspace was running. It's close enough
today, but it might not stay that way."
If the case happens later, lots of consecutive page walk errors will
happen. The worst case is that lots of page-size '0' are returned, which
would not be fatal.
In the perf tool, a check is implemented to detect this case. Once it
happens, a kernel patch could be implemented accordingly then.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201001135749.2804-2-kan.liang@linux.intel.com
Pull perf fix from Thomas Gleixner:
"A single fix to compute the field offset of the SNOOPX bit in the data
source bitmask of perf events correctly"
* tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: correct SNOOPX field offset
Pull misc vfs updates from Al Viro:
"Assorted stuff all over the place (the largest group here is
Christoph's stat cleanups)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove KSTAT_QUERY_FLAGS
fs: remove vfs_stat_set_lookup_flags
fs: move vfs_fstatat out of line
fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat
fs: remove vfs_statx_fd
fs: omfs: use kmemdup() rather than kmalloc+memcpy
[PATCH] reduce boilerplate in fsid handling
fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS
selftests: mount: add nosymfollow tests
Add a "nosymfollow" mount option.
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms. A bulk of this is smaller fixes
or cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs and
platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
soc: amlogic: pm-domains: use always-on flag
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
...
Pull networking fixes from Jakub Kicinski:
"Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late in
the 5.9 cycle started depending on a return code from a function
which changed with the 5.10 PR from the usb subsystem
Current release regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous release regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu() to
synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems; the
property is not populated correctly by the firmware, but firmware
configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is light
and only wants to schedule napi (and do so through a _irqoff()
variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it"
* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
tcp: fix to update snd_wl1 in bulk receiver fast path
net: Properly typecast int values to set sk_max_pacing_rate
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
ibmvnic: save changed mac address to adapter->mac_addr
selftests: mptcp: depends on built-in IPv6
Revert "virtio-net: ethtool configurable RXCSUM"
rtnetlink: fix data overflow in rtnl_calcit()
net: ethernet: mtk-star-emac: select REGMAP_MMIO
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
mptcp: depends on IPV6 but not as a module
sfc: move initialisation of efx->filter_sem to efx_init_struct()
mpls: load mpls_gso after mpls_iptunnel
net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
net: dsa: bcm_sf2: make const array static, makes object smaller
mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
...
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
This patch introduces a new ioctl for vhost-vdpa device that can
report the iova range by the device.
For device that implements get_iova_range() method, we fetch it from
the vDPA device. If device doesn't implement get_iova_range() but
depends on platform IOMMU, we will query via DOMAIN_ATTR_GEOMETRY,
otherwise [0, ULLONG_MAX] is assumed.
For safety, this patch also rules out the map request which is not in
the valid range.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20201023090043.14430-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull VFIO updates from Alex Williamson:
- New fsl-mc vfio bus driver supporting userspace drivers of objects
within NXP's DPAA2 architecture (Diana Craciun)
- Support for exposing zPCI information on s390 (Matthew Rosato)
- Fixes for "detached" VFs on s390 (Matthew Rosato)
- Fixes for pin-pages and dma-rw accesses (Yan Zhao)
- Cleanups and optimize vconfig regen (Zenghui Yu)
- Fix duplicate irq-bypass token registration (Alex Williamson)
* tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits)
vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages
vfio/pci: Clear token on bypass registration failure
vfio/fsl-mc: fix the return of the uninitialized variable ret
vfio/fsl-mc: Fix the dead code in vfio_fsl_mc_set_irq_trigger
vfio/fsl-mc: Fixed vfio-fsl-mc driver compilation on 32 bit
MAINTAINERS: Add entry for s390 vfio-pci
vfio-pci/zdev: Add zPCI capabilities to VFIO_DEVICE_GET_INFO
vfio/fsl-mc: Add support for device reset
vfio/fsl-mc: Add read/write support for fsl-mc devices
vfio/fsl-mc: trigger an interrupt via eventfd
vfio/fsl-mc: Add irq infrastructure for fsl-mc devices
vfio/fsl-mc: Added lock support in preparation for interrupt handling
vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions
vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call
vfio/fsl-mc: Implement VFIO_DEVICE_GET_INFO ioctl
vfio/fsl-mc: Scan DPRC objects on vfio-fsl-mc driver bind
vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFO
s390/pci: track whether util_str is valid in the zpci_dev
s390/pci: stash version in the zpci_dev
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices
...
Pull nfsd updates from Bruce Fields:
"The one new feature this time, from Anna Schumaker, is READ_PLUS,
which has the same arguments as READ but allows the server to return
an array of data and hole extents.
Otherwise it's a lot of cleanup and bugfixes"
* tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits)
NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy
SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
sunrpc: raise kernel RPC channel buffer size
svcrdma: fix bounce buffers for unaligned offsets and multiple pages
nfsd: remove unneeded break
net/sunrpc: Fix return value for sysctl sunrpc.transports
NFSD: Encode a full READ_PLUS reply
NFSD: Return both a hole and a data segment
NFSD: Add READ_PLUS hole segment encoding
NFSD: Add READ_PLUS data support
NFSD: Hoist status code encoding into XDR encoder functions
NFSD: Map nfserr_wrongsec outside of nfsd_dispatch
NFSD: Remove the RETURN_STATUS() macro
NFSD: Call NFSv2 encoders on error returns
NFSD: Fix .pc_release method for NFSv2
NFSD: Remove vestigial typedefs
NFSD: Refactor nfsd_dispatch() error paths
NFSD: Clean up nfsd_dispatch() variables
NFSD: Clean up stale comments in nfsd_dispatch()
NFSD: Clean up switch statement in nfsd_dispatch()
...
KVM unconditionally provides PV features to the guest, regardless of the
configured CPUID. An unwitting guest that doesn't check
KVM_CPUID_FEATURES before use could access paravirt features that
userspace did not intend to provide. Fix this by checking the guest's
CPUID before performing any paravirtual operations.
Introduce a capability, KVM_CAP_ENFORCE_PV_FEATURE_CPUID, to gate the
aforementioned enforcement. Migrating a VM from a host w/o this patch to
a host with this patch could silently change the ABI exposed to the
guest, warranting that we default to the old behavior and opt-in for
the new one.
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Change-Id: I202a0926f65035b872bfe8ad15307c026de59a98
Message-Id: <20200818152429.1923996-4-oupton@google.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix designware-ep Header Type check (Hou Zhiqiang)
- Use DBI accessors instead of own config accessors (Rob Herring)
- Allow overriding bridge pci_ops (Rob Herring)
- Allow root and child buses to have different pci_ops (Rob Herring)
- Add default dwc pci_ops.map_bus (Rob Herring)
- Use pci_ops for root config space accessors in al, exynos, histb,
keystone, kirin, meson, tegra (Rob Herring)
- Remove dwc own/other config accessor ops (Rob Herring)
- Use generic config accessors in dwc (Rob Herring)
- Also call .add_bus() callback for root bus (Rob Herring)
- Convert keystone .scan_bus() callback to use pci_ops.add_bus (Rob
Herring)
- Convert dwc to use pci_host_probe() (Rob Herring)
- Remove dwc root_bus pointer (Rob Herring)
- Remove storing of PCI resources in dwc-specific structs (Rob Herring)
- Simplify config space handling (Rob Herring)
- Drop keystone duplicated DT num-viewport handling (Rob Herring)
- Check CONFIG_PCI_MSI in dw_pcie_msi_init() instead of duplicating it in
all the drivers (Rob Herring)
- Remove imx6 duplicate PCIE_LINK_WIDTH_SPEED_CONTROL definition (Rob
Herring)
- Add dwc num_lanes for use when it's lacking from DT (Rob Herring)
- Ensure "Fast Link Mode" simulation environment setting is cleared (Rob
Herring)
- Drop meson duplicate number of lanes setup (Rob Herring)
- Drop meson unnecessary RC config space init (Rob Herring)
- Rework meson config and dwc port logic register accesses (Rob Herring)
- Use common PCI register definitions in imx6 and qcom (Rob Herring)
- Search for DesignWare PCIe Capability instead of hard-coding its location
(Rob Herring)
- Use common DesignWare register definitions in tegra (Rob Herring)
- Drop keystone unused DBI2 code (Rob Herring)
- Make dwc ATU accessors private (Rob Herring)
- Centralize link gen setting in dwc (Rob Herring)
- Set PORT_LINK_DLL_LINK_EN in common dwc setup code (Rob Herring)
- Drop intel-gw unnecessary DT 'device_type' checking (Rob Herring)
- Move intel-gw PCI_CAP_ID_EXP discovery to the single place it's used (Rob
Herring)
- Drop intel-gw unused max_width (Rob Herring)
- Move N_FTS (fast training sequence) setup to common dwc setup (Rob
Herring)
- Convert spear13xx, tegra194 to use DBI accessors (Rob Herring)
- Add multiple PFs support for DWC (Xiaowei Bao)
- Add MSI-X doorbell mode for endpoint mode (Xiaowei Bao)
- Update MSI/MSI-X capability management for endpoints (Xiaowei Bao)
- Add layerscape ls1088a and ls2088a compatible strings (Xiaowei Bao)
- Update layerscape MSI/MSI-X management (Xiaowei Bao)
- Use doorbell to support MSI-X on layerscape (Xiaowei Bao)
- Add layerscape endpoint mode support for ls1088a and ls2088a (Xiaowei
Bao)
- Add layerscape ls1088a node to DT (Xiaowei Bao)
- Add Freescale/Layerscape ls1088a to endpoint test (Xiaowei Bao)
- Add endpoint test driver data for Layerscape PCIe controllers (Hou
Zhiqiang)
- Fix 'cast truncates bits from constant value' warning (Gustavo Pimentel)
- Add uniphier iATU register description (Kunihiko Hayashi)
- Add common iATU register support (Kunihiko Hayashi)
- Remove keystone iATU register mapping in favor of generic dwc support
(Kunihiko Hayashi)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Fix MSI page leakage in suspend/resume (Jisheng Zhang)
- Check whether link is up before attempting config access (best-effort fix
even though it's racy) (Hou Zhiqiang)
* remotes/lorenzo/pci/dwc:
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI: dwc: Fix MSI page leakage in suspend/resume
PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabled
PCI: keystone: Remove iATU register mapping
PCI: dwc: Add common iATU register support
dt-bindings: PCI: uniphier-ep: Add iATU register description
dt-bindings: PCI: uniphier: Add iATU register description
PCI: dwc: Fix 'cast truncates bits from constant value'
misc: pci_endpoint_test: Add driver data for Layerscape PCIe controllers
misc: pci_endpoint_test: Add LS1088a in pci_device_id table
PCI: layerscape: Add EP mode support for ls1088a and ls2088a
PCI: layerscape: Modify the MSIX to the doorbell mode
PCI: layerscape: Modify the way of getting capability with different PEX
PCI: layerscape: Fix some format issue of the code
dt-bindings: pci: layerscape-pci: Add compatible strings for ls1088a and ls2088a
PCI: designware-ep: Modify MSI and MSIX CAP way of finding
PCI: designware-ep: Move the function of getting MSI capability forward
PCI: designware-ep: Add the doorbell mode of MSI-X in EP mode
PCI: designware-ep: Add multiple PFs support for DWC
PCI: dwc: Use DBI accessors
PCI: dwc: Move N_FTS setup to common setup
PCI: dwc/intel-gw: Drop unused max_width
PCI: dwc/intel-gw: Move getting PCI_CAP_ID_EXP offset to intel_pcie_link_setup()
PCI: dwc/intel-gw: Drop unnecessary checking of DT 'device_type' property
PCI: dwc: Set PORT_LINK_DLL_LINK_EN in common setup code
PCI: dwc: Centralize link gen setting
PCI: dwc: Make ATU accessors private
PCI: dwc: Remove read_dbi2 code
PCI: dwc/tegra: Use common Designware port logic register definitions
PCI: dwc: Remove hardcoded PCI_CAP_ID_EXP offset
PCI: dwc/qcom: Use common PCI register definitions
PCI: dwc/imx6: Use common PCI register definitions
PCI: dwc/meson: Rework PCI config and DW port logic register accesses
PCI: dwc/meson: Drop unnecessary RC config space initialization
PCI: dwc/meson: Drop the duplicate number of lanes setup
PCI: dwc: Ensure FAST_LINK_MODE is cleared
PCI: dwc: Add a 'num_lanes' field to struct dw_pcie
PCI: dwc/imx6: Remove duplicate define PCIE_LINK_WIDTH_SPEED_CONTROL
PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init()
PCI: dwc/keystone: Drop duplicated 'num-viewport'
PCI: dwc: Simplify config space handling
PCI: dwc: Remove storing of PCI resources
PCI: dwc: Remove root_bus pointer
PCI: dwc: Convert to use pci_host_probe()
PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus
PCI: Also call .add_bus() callback for root bus
PCI: dwc: Use generic config accessors
PCI: dwc: Remove dwc specific config accessor ops
PCI: dwc: histb: Use pci_ops for root config space accessors
PCI: dwc: exynos: Use pci_ops for root config space accessors
PCI: dwc: kirin: Use pci_ops for root config space accessors
PCI: dwc: meson: Use pci_ops for root config space accessors
PCI: dwc: tegra: Use pci_ops for root config space accessors
PCI: dwc: keystone: Use pci_ops for config space accessors
PCI: dwc: al: Use pci_ops for child config space accessors
PCI: dwc: Add a default pci_ops.map_bus for root port
PCI: dwc: Allow overriding bridge pci_ops
PCI: dwc: Use DBI accessors instead of own config accessors
PCI: Allow root and child buses to have different pci_ops
PCI: designware-ep: Fix the Header Type check
Pull NFS client updates from Anna Schumaker:
"Stable Fixes:
- Wait for stateid updates after CLOSE/OPEN_DOWNGRADE # v5.4+
- Fix nfs_path in case of a rename retry
- Support EXCHID4_FLAG_SUPP_FENCE_OPS v4.2 EXCHANGE_ID flag
New features and improvements:
- Replace dprintk() calls with tracepoints
- Make cache consistency bitmap dynamic
- Added support for the NFS v4.2 READ_PLUS operation
- Improvements to net namespace uniquifier
Other bugfixes and cleanups:
- Remove redundant clnt pointer
- Don't update timeout values on connection resets
- Remove redundant tracepoints
- Various cleanups to comments
- Fix oops when trying to use copy_file_range with v4.0 source server
- Improvements to flexfiles mirrors
- Add missing 'local_lock=posix' mount option"
* tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (55 commits)
NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flag
NFSv4: Fix up RCU annotations for struct nfs_netns_client
NFS: Only reference user namespace from nfs4idmap struct instead of cred
nfs: add missing "posix" local_lock constant table definition
NFSv4: Use the net namespace uniquifier if it is set
NFSv4: Clean up initialisation of uniquified client id strings
NFS: Decode a full READ_PLUS reply
SUNRPC: Add an xdr_align_data() function
NFS: Add READ_PLUS hole segment decoding
SUNRPC: Add the ability to expand holes in data pages
SUNRPC: Split out _shift_data_right_tail()
SUNRPC: Split out xdr_realign_pages() from xdr_align_pages()
NFS: Add READ_PLUS data segment support
NFS: Use xdr_page_pos() in NFSv4 decode_getacl()
SUNRPC: Implement a xdr_page_pos() function
SUNRPC: Split out a function for setting current page
NFS: fix nfs_path in case of a rename retry
fs: nfs: return per memcg count for xattr shrinkers
NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE
nfs: remove incorrect fallthrough label
...
