We don't check that the v4 feature flags taht v5 requires to be set
are actually set anywhere. Do this check when we see that the
filesystem is a v5 filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
While xfs_has_nlink() is not used in kernel, it is used in userspace
(e.g. by xfs_db) so we need to set the XFS_FEAT_NLINK flag correctly
in xfs_sb_version_to_features().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_repair catches fork size/format mismatches, but the in-kernel
verifier doesn't, leading to null pointer failures when attempting
to perform operations on the fork. This can occur in the
xfs_dir_is_empty() where the in-memory fork format does not match
the size and so the fork data pointer is accessed incorrectly.
Note: this causes new failures in xfs/348 which is testing mode vs
ftype mismatches. We now detect a regular file that has been changed
to a directory or symlink mode as being corrupt because the data
fork is for a symlink or directory should be in local form when
there are only 3 bytes of data in the data fork. Hence the inode
verify for the regular file now fires w/ -EFSCORRUPTED because
the inode fork format does not match the format the corrupted mode
says it should be in.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To catch the obvious graph cycle problem and hence potential endless
looping.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we log modifications based on intents, we add both intent
and intent done items to the modification being made. These get
written to the log to ensure that the operation is re-run if the
intent done is not found in the log.
However, for operations that complete wholly within a single
checkpoint, the change in the checkpoint is atomic and will never
need replay. In this case, we don't need to actually write the
intent and intent done items to the journal because log recovery
will never need to manually restart this modification.
Log recovery currently handles intent/intent done matching by
inserting the intent into the AIL, then removing it when a matching
intent done item is found. Hence for all the intent-based operations
that complete within a checkpoint, we spend all that time parsing
the intent/intent done items just to cancel them and do nothing with
them.
Hence it follows that the only time we actually need intents in the
log is when the modification crosses checkpoint boundaries in the
log and so may only be partially complete in the journal. Hence if
we commit and intent done item to the CIL and the intent item is in
the same checkpoint, we don't actually have to write them to the
journal because log recovery will always cancel the intents.
We've never really worried about the overhead of logging intents
unnecessarily like this because the intents we log are generally
very much smaller than the change being made. e.g. freeing an extent
involves modifying at lease two freespace btree blocks and the AGF,
so the EFI/EFD overhead is only a small increase in space and
processing time compared to the overall cost of freeing an extent.
However, delayed attributes change this cost equation dramatically,
especially for inline attributes. In the case of adding an inline
attribute, we only log the inode core and attribute fork at present.
With delayed attributes, we now log the attr intent which includes
the name and value, the inode core adn attr fork, and finally the
attr intent done item. We increase the number of items we log from 1
to 3, and the number of log vectors (regions) goes up from 3 to 7.
Hence we tripple the number of objects that the CIL has to process,
and more than double the number of log vectors that need to be
written to the journal.
At scale, this means delayed attributes cause a non-pipelined CIL to
become CPU bound processing all the extra items, resulting in a > 40%
performance degradation on 16-way file+xattr create worklaods.
Pipelining the CIL (as per 5.15) reduces the performance degradation
to 20%, but now the limitation is the rate at which the log items
can be written to the iclogs and iclogs be dispatched for IO and
completed.
Even log IO completion is slowed down by these intents, because it
now has to process 3x the number of items in the checkpoint.
Processing completed intents is especially inefficient here, because
we first insert the intent into the AIL, then remove it from the AIL
when the intent done is processed. IOWs, we are also doing expensive
operations in log IO completion we could completely avoid if we
didn't log completed intent/intent done pairs.
Enter log item whiteouts.
When an intent done is committed, we can check to see if the
associated intent is in the same checkpoint as we are currently
committing the intent done to. If so, we can mark the intent log
item with a whiteout and immediately free the intent done item
rather than committing it to the CIL. We can basically skip the
entire formatting and CIL insertion steps for the intent done item.
However, we cannot remove the intent item from the CIL at this point
because the unlocked per-cpu CIL item lists do not permit removal
without holding the CIL context lock exclusively. Transaction commit
only holds the context lock shared, hence the best we can do is mark
the intent item with a whiteout so that the CIL push can release it
rather than writing it to the log.
This means we never write the intent to the log if the intent done
has also been committed to the same checkpoint, but we'll always
write the intent if the intent done has not been committed or has
been committed to a different checkpoint. This will result in
correct log recovery behaviour in all cases, without the overhead of
logging unnecessary intents.
This intent whiteout concept is generic - we can apply it to all
intent/intent done pairs that have a direct 1:1 relationship. The
way deferred ops iterate and relog intents mean that all intents
currently have a 1:1 relationship with their done intent, and hence
we can apply this cancellation to all existing intent/intent done
implementations.
For delayed attributes with a 16-way 64kB xattr create workload,
whiteouts reduce the amount of journalled metadata from ~2.5GB/s
down to ~600MB/s and improve the creation rate from 9000/s to
14000/s.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we release an intent that a whiteout applies to, it will not
have been committed to the journal and so won't be in the AIL. Hence
when we drop the last reference to the intent, we do not want to try
to remove it from the AIL as that will trigger a filesystem
shutdown. Hence make the removal of intents from the AIL conditional
on them actually being in the AIL so we do the correct thing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To apply a whiteout to an intent item when an intent done item is
committed, we need to be able to retrieve the intent item from the
the intent done item. Add a log item op method for doing this, and
wire all the intent done items up to it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Intent whiteouts will require extra work to be done during
transaction commit if the transaction contains an intent done item.
To determine if a transaction contains an intent done item, we want
to avoid having to walk all the items in the transaction to check if
they are intent done items. Hence when we add an intent done item to
a transaction, tag the transaction to indicate that it contains such
an item.
We don't tag the transaction when the defer ops is relogging an
intent to move it forward in the log. Whiteouts will never apply to
these cases, so we don't need to bother looking for them.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We currently have a couple of helper functions that try to infer
whether the log item is an intent or intent done item from the
combinations of operations it supports. This is incredibly fragile
and not very efficient as it requires checking specific combinations
of ops.
We need to be able to identify intent and intent done items quickly
and easily in upcoming patches, so simply add intent and intent done
type flags to the log item ops flags. These are static flags to
begin with, so intent items should have been typed like this from
the start.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If the first operation in a string of defer ops has no intents,
then there is no reason to commit it before running the first call
to xfs_defer_finish_one(). This allows the defer ops to be used
effectively for non-intent based operations without requiring an
unnecessary extra transaction commit when first called.
This fixes a regression in per-attribute modification transaction
count when delayed attributes are not being used.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Callers currently have to round out the size of buffers to match the
aligment constraints of log iovecs and xlog_write(). They should not
need to know this detail, so introduce a new function to calculate
the iovec length (for use in ->iop_size implementations). Also
modify xlog_finish_iovec() to round up the length to the correct
alignment so the callers don't need to do this, either.
Convert the only user - inode forks - of this alignment rounding to
use the new interface.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Ever since we added shadown format buffers to the log items, log
items need to handle the item being released with shadow buffers
attached. Due to the fact this requirement was added at the same
time we added new rmap/reflink intents, we missed the cleanup of
those items.
In theory, this means shadow buffers can be leaked in a very small
window when a shutdown is initiated. Testing with KASAN shows this
leak does not happen in practice - we haven't identified a single
leak in several years of shutdown testing since ~v4.8 kernels.
However, the intent whiteout cleanup mechanism results in every
cancelled intent in exactly the same state as this tiny race window
creates and so if intents down clean up shadow buffers on final
release we will leak the shadow buffer for just about every intent
we create.
Hence we start with this patch to close this condition off and
ensure that when whiteouts start to be used we don't leak lots of
memory.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we first allocate or resize an inline inode fork, we round up
the allocation to 4 byte alingment to make journal alignment
constraints. We don't clear the unused bytes, so we can copy up to
three uninitialised bytes into the journal. Zero those bytes so we
only ever copy zeros into the journal.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull btrfs fixes from David Sterba:
"A few more fixes mostly around how some file attributes could be set.
- fix handling of compression property:
- don't allow setting it on anything else than regular file or
directory
- do not allow setting it on nodatacow files via properties
- improved error handling when setting xattr
- make sure symlinks are always properly logged"
* tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: skip compression property for anything other than files and dirs
btrfs: do not BUG_ON() on failure to update inode when setting xattr
btrfs: always log symlinks in full mode
btrfs: do not allow compression on nodatacow files
btrfs: export a helper for compression hard check
This patch will optimize __put_lkb() by using kref_put_lock(). The
function kref_put_lock() will only take the lock if the reference is
going to be zero, if not the lock will never be held.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will optimize put_rsb() by using kref_put_lock(). The
function kref_put_lock() will only take the lock if the reference is
going to be zero, if not the lock will never be held.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes unnecessary error assigns to 0 at places we know that
error is zero because it was checked on non-zero before.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
We always call hold_lkb(lkb) if we increment lkb->lkb_wait_count.
So, we always need to call unhold_lkb(lkb) if we decrement
lkb->lkb_wait_count. This patch will add missing unhold_lkb(lkb) if we
decrement lkb->lkb_wait_count. In case of setting lkb->lkb_wait_count to
zero we need to countdown until reaching zero and call unhold_lkb(lkb).
The waiters list unhold_lkb(lkb) can be removed because it's done for
the last lkb_wait_count decrement iteration as it's done in
_remove_from_waiters().
This issue was discovered by a dlm gfs2 test case which use excessively
dlm_unlock(LKF_CANCEL) feature. Probably the lkb->lkb_wait_count value
never reached above 1 if this feature isn't used and so it was not
discovered before.
The testcase ended in a rsb on the rsb keep data structure with a
refcount of 1 but no lkb was associated with it, which is itself
an invalid behaviour. A side effect of that was a condition in which
the dlm was sending remove messages in a looping behaviour. With this
patch that has not been reproduced.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
So far bio is marked as REQ_POLLED if RWF_HIPRI/IOCB_HIPRI is passed
from userspace sync io interface, then block layer tries to poll until
the bio is completed. But the current implementation calls
blk_io_schedule() if bio_poll() returns 0, and this way causes io hang or
timeout easily.
But looks no one reports this kind of issue, which should have been
triggered in normal io poll sanity test or blktests block/007 as
observed by Changhui, that means it is very likely that no one uses it
or no one cares it.
Also after io_uring is invented, io poll for sync dio becomes legacy
interface.
So ignore RWF_HIPRI hint for sync dio.
CC: linux-mm@kvack.org
Cc: linux-xfs@vger.kernel.org
Reported-by: Changhui Zhong <czhong@redhat.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Changhui Zhong <czhong@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220420143110.2679002-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We defer file assignment to ensure that fixed files work with links
between a direct accept/open and the links that follow it. But this has
the side effect that normal file assignment is then not complete by the
time that request submission has been done.
For deferred execution, if the file is a regular file, assign it when
we do the async prep anyway.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Define a function named fsverity_get_digest() to return the verity file
digest and the associated hash algorithm (enum hash_algo).
This assumes that before calling fsverity_get_digest() the file must have
been opened, which is even true for the IMA measure/appraise on file
open policy rule use case (func=FILE_CHECK). do_open() calls vfs_open()
immediately prior to ima_file_check().
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Pull driver core fixes from Greg KH:
"Here are some small driver core and kernfs fixes for some reported
problems. They include:
- kernfs regression that is causing oopses in 5.17 and newer releases
- topology sysfs fixes for a few small reported problems.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kernfs: fix NULL dereferencing in kernfs_remove
topology: Fix up build warning in topology_is_visible()
arch_topology: Do not set llc_sibling if llc_id is invalid
topology: make core_mask include at least cluster_siblings
topology/sysfs: Hide PPIN on systems that do not support it.
The IORING_SQ_NEED_WAKEUP flag is now set using atomic_or() which
implies a full barrier on some architectures but it is not required to
do so. Use the more appropriate smp_mb__after_atomic() which avoids the
extra barrier on those architectures.
Signed-off-by: Almog Khaikin <almogkh@gmail.com>
Link: https://lore.kernel.org/r/20220426163403.112692-1-almogkh@gmail.com
Fixes: 8018823e6987 ("io_uring: serialize ctx->rings->sq_flags with atomic_or/and")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IORING_SETUP_COOP_TASKRUN is set to use cooperative scheduling for
running task_work, then IORING_SETUP_TASKRUN_FLAG can be set so the
application can tell if task_work is pending in the kernel for this
ring. This allows use cases like io_uring_peek_cqe() to still function
appropriately, or for the task to know when it would be useful to
call io_uring_wait_cqe() to run pending events.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20220426014904.60384-7-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If this is set, io_uring will never use an IPI to deliver a task_work
notification. This can be used in the common case where a single task or
thread communicates with the ring, and doesn't rely on
io_uring_cqe_peek().
This provides a noticeable win in performance, both from eliminating
the IPI itself, but also from avoiding interrupting the submitting
task unnecessarily.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20220426014904.60384-6-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only difference between set_notify_signal() and __set_notify_signal()
is that the former checks if it needs to deliver an IPI to force a
reschedule. As the io-wq workers never leave the kernel, and IPI is never
needed, they simply need a wakeup.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20220426014904.60384-4-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than require ctx->completion_lock for ensuring that we don't
clobber the flags, use the atomic bitop helpers instead. This removes
the need to grab the completion_lock, in preparation for needing to set
or clear sq_flags when we don't know the status of this lock.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20220426014904.60384-3-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For now just use a CQE flag for this, with big CQE support we could
return the actual number of bytes left.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-5.19/io_uring-socket: (73 commits)
io_uring: use the text representation of ops in trace
io_uring: rename op -> opcode
io_uring: add io_uring_get_opcode
io_uring: add type to op enum
io_uring: add socket(2) support
net: add __sys_socket_file()
io_uring: fix trace for reduced sqe padding
io_uring: add fgetxattr and getxattr support
io_uring: add fsetxattr and setxattr support
fs: split off do_getxattr from getxattr
fs: split off setxattr_copy and do_setxattr function from setxattr
io_uring: return an error when cqe is dropped
io_uring: use constants for cq_overflow bitfield
io_uring: rework io_uring_enter to simplify return value
io_uring: trace cqe overflows
io_uring: add trace support for CQE overflow
io_uring: allow re-poll if we made progress
io_uring: support MSG_WAITALL for IORING_OP_SEND(MSG)
io_uring: add support for IORING_ASYNC_CANCEL_ANY
io_uring: allow IORING_OP_ASYNC_CANCEL with 'fd' key
...
Pull io_uring fixes from Jens Axboe:
"Pretty boring:
- three patches just adding reserved field checks (me, Eugene)
- Fixing a potential regression with IOPOLL caused by a block change
(Joseph)"
Boring is good.
* tag 'io_uring-5.18-2022-04-29' of git://git.kernel.dk/linux-block:
io_uring: check that data field is 0 in ringfd unregister
io_uring: fix uninitialized field in rw io_kiocb
io_uring: check reserved fields for recv/recvmsg
io_uring: check reserved fields for send/sendmsg
sbi->s_firstinodezone is initialized to 2 and sbi->s_firstdatazone is read
from sbd. There's no guarantee that sbi->s_firstdatazone must bigger than
sbi->s_firstinodezone. If sbi->s_firstdatazone less than 2, the
filesystem can still be mounted unexpetly. At this point, sbi->s_ninodes
flip to very large value and this filesystem is broken. We can observe
this by executing 'df' command. When we execute, we will get an error
message:
"sysv_count_free_inodes: unable to read inode table"
Link: https://lkml.kernel.org/r/20220330104215.530223-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order for end users to quickly react to new issues that come up in
production, it is proving useful to leverage the printk indexing system.
This printk index enables kernel developers to use calls to printk() with
changeable ad-hoc format strings (as they always have; no change of
expectations), while enabling end users to examine format strings to
detect changes.
Since end users are using regular expressions to match messages printed
through printk(), being able to detect changes in chosen format strings
from release to release provides a useful signal to review
printk()-matching regular expressions for any necessary updates.
So that detailed FAT messages are captured by this printk index, this
patch wraps fat_msg with a macro.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/8aaa2dd7995e820292bb40d2120ab69756662c65.1648688136.git.jof@thejof.com
Signed-off-by: Jonathan Lassoff <jof@thejof.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix data-races around epoll reported by KCSAN."
This series suppresses a false positive KCSAN's message and fixes a real
data-race.
This patch (of 2):
pipe_poll() runs locklessly and assigns 1 to poll_usage. Once poll_usage
is set to 1, it never changes in other places. However, concurrent writes
of a value trigger KCSAN, so let's make KCSAN happy.
BUG: KCSAN: data-race in pipe_poll / pipe_poll
write to 0xffff8880042f6678 of 4 bytes by task 174 on cpu 3:
pipe_poll (fs/pipe.c:656)
ep_item_poll.isra.0 (./include/linux/poll.h:88 fs/eventpoll.c:853)
do_epoll_wait (fs/eventpoll.c:1692 fs/eventpoll.c:1806 fs/eventpoll.c:2234)
__x64_sys_epoll_wait (fs/eventpoll.c:2246 fs/eventpoll.c:2241 fs/eventpoll.c:2241)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
write to 0xffff8880042f6678 of 4 bytes by task 177 on cpu 1:
pipe_poll (fs/pipe.c:656)
ep_item_poll.isra.0 (./include/linux/poll.h:88 fs/eventpoll.c:853)
do_epoll_wait (fs/eventpoll.c:1692 fs/eventpoll.c:1806 fs/eventpoll.c:2234)
__x64_sys_epoll_wait (fs/eventpoll.c:2246 fs/eventpoll.c:2241 fs/eventpoll.c:2241)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 177 Comm: epoll_race Not tainted 5.17.0-58927-gf443e374ae13 #6
Hardware name: Red Hat KVM, BIOS 1.11.0-2.amzn2 04/01/2014
Link: https://lkml.kernel.org/r/20220322002653.33865-1-kuniyu@amazon.co.jp
Link: https://lkml.kernel.org/r/20220322002653.33865-2-kuniyu@amazon.co.jp
Fixes: 3b844826b6 ("pipe: avoid unnecessary EPOLLET wakeups under normal loads")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kuniyuki Iwashima <kuni1840@gmail.com>
Cc: "Soheil Hassas Yeganeh" <soheil@google.com>
Cc: "Sridhar Samudrala" <sridhar.samudrala@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Convert vmcore to use an iov_iter", v5.
For some reason several people have been sending bad patches to fix
compiler warnings in vmcore recently. Here's how it should be done.
Compile-tested only on x86. As noted in the first patch, s390 should take
this conversion a bit further, but I'm not inclined to do that work
myself.
This patch (of 3):
Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter.
s390 needs more work to pass the iov_iter down further, or refactor, but
I'd be more comfortable if someone who can test on s390 did that work.
It's more convenient to convert the whole of read_from_oldmem() to take an
iov_iter at the same time, so rename it to read_from_oldmem_iter() and add
a temporary read_from_oldmem() wrapper that creates an iov_iter.
Link: https://lkml.kernel.org/r/20220408090636.560886-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20220408090636.560886-2-bhe@redhat.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "rewrite error handling during mounting stage".
This patch (of 5):
After commit da5e7c8782 ("ocfs2: cleanup journal init and shutdown"),
journal init later than before, it makes NULL pointer access in free
routine.
Crash flow:
ocfs2_fill_super
+ ocfs2_mount_volume
| + ocfs2_dlm_init //fail & return, osb->journal is NULL.
| + ...
| + ocfs2_check_volume //no chance to init osb->journal
|
+ ...
+ ocfs2_dismount_volume
ocfs2_release_system_inodes
...
evict
...
ocfs2_clear_inode
ocfs2_checkpoint_inode
ocfs2_ci_fully_checkpointed
time_after(journal->j_trans_id, ci->ci_last_trans)
+ journal is empty, crash!
For fixing, there are three solutions:
1> Partly revert commit da5e7c8782
For avoiding kernel crash, this make sense for us. We only
concerned whether there has any non-system inode access before dlm
init. The answer is NO. And all journal replay/recovery handling
happen after dlm & journal init done. So this method is not graceful
but workable.
2> Add osb->journal check in free inode routine (eg ocfs2_clear_inode)
The fix code is special for mounting phase, but it will continue
working after mounting stage. In another word, this method adds
useless code in normal inode free flow.
3> Do directly free inode in mounting phase
This method is brutal/complex and may introduce unsafe code,
currently maintainer didn't like.
At last, we chose method <1> and did partly reverted job. We reverted
journal init codes, and kept cleanup codes flow.
Link: https://lkml.kernel.org/r/20220424130952.2436-1-heming.zhao@suse.com
Link: https://lkml.kernel.org/r/20220424130952.2436-2-heming.zhao@suse.com
Fixes: da5e7c8782 ("ocfs2: cleanup journal init and shutdown")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
