If device is removal is initiated by two threads as below, mdev core
attempts to create a syfs remove file on stale device.
During this flow, below [1] call trace is observed.
cpu-0 cpu-1
----- -----
mdev_unregister_device()
device_for_each_child
mdev_device_remove_cb
mdev_device_remove
user_syscall
remove_store()
mdev_device_remove()
[..]
unregister device();
/* not found in list or
* active=false.
*/
sysfs_create_file()
..Call trace
Now that mdev core follows correct device removal sequence of the linux
bus model, remove shouldn't fail in normal cases. If it fails, there is
no point of creating a stale file or checking for specific error status.
kernel: WARNING: CPU: 2 PID: 9348 at fs/sysfs/file.c:327
sysfs_create_file_ns+0x7f/0x90
kernel: CPU: 2 PID: 9348 Comm: bash Kdump: loaded Not tainted
5.1.0-rc6-vdevbus+ #6
kernel: Hardware name: Supermicro SYS-6028U-TR4+/X10DRU-i+, BIOS 2.0b
08/09/2016
kernel: RIP: 0010:sysfs_create_file_ns+0x7f/0x90
kernel: Call Trace:
kernel: remove_store+0xdc/0x100 [mdev]
kernel: kernfs_fop_write+0x113/0x1a0
kernel: vfs_write+0xad/0x1b0
kernel: ksys_write+0x5a/0xe0
kernel: do_syscall_64+0x5a/0x210
kernel: entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, the process issuing a "start" command on the pktgen procfs
interface, acquires the pktgen thread lock and never release it, until
all pktgen threads are completed. The above can blocks indefinitely any
other pktgen command and any (even unrelated) netdevice removal - as
the pktgen netdev notifier acquires the same lock.
The issue is demonstrated by the following script, reported by Matteo:
ip -b - <<'EOF'
link add type dummy
link add type veth
link set dummy0 up
EOF
modprobe pktgen
echo reset >/proc/net/pktgen/pgctrl
{
echo rem_device_all
echo add_device dummy0
} >/proc/net/pktgen/kpktgend_0
echo count 0 >/proc/net/pktgen/dummy0
echo start >/proc/net/pktgen/pgctrl &
sleep 1
rmmod veth
Fix the above releasing the thread lock around the sleep call.
Additionally we must prevent racing with forcefull rmmod - as the
thread lock no more protects from them. Instead, acquire a self-reference
before waiting for any thread. As a side effect, running
rmmod pktgen
while some thread is running now fails with "module in use" error,
before this patch such command hanged indefinitely.
Note: the issue predates the commit reported in the fixes tag, but
this fix can't be applied before the mentioned commit.
v1 -> v2:
- no need to check for thread existence after flipping the lock,
pktgen threads are freed only at net exit time
-
Fixes: 6146e6a43b ("[PKTGEN]: Removes thread_{un,}lock() macros.")
Reported-and-tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
with fixes for adfs:
- factor out filename comparison, so we can be sure that adfs_compare()
(used for namei compare) and adfs_match() (used for lookup) have the
same behaviour.
- factor out filename lowering (which is not the same as tolower() which
will lower top-bit-set characters) to ensure that we have the same
behaviour when comparing filenames as when we hash them.
- factor out the object fixups, so we are applying all fixups to
directory objects in the same way, independent of the disk format.
- factor out the object name fixup (into the previously factored out
function) to ensure that filenames are appropriately translated -
for example, adfs allows '/' in filenames, which being the Unix path
separator, need to be translated to a different character, which is
normally '.' (DOS 8.3 filenames represent the . as a / on adfs, so
this is the expected reverse translation.)
- remove filename truncation; Al asked about this and apparently the
decision is to remove it. In any case, adfs's truncation was buggy,
so this rids us of that bug by removing the truncation feature.
- we now have only one location which adds the "filetype" suffix to the
filename, so there's no point that code being out of line.
- since we translate '/' into '.', an adfs filename of "/" or "//" would
end up being translated to "." and ".." which have special meanings.
In this case, change the first character to "^" to avoid these special
directory names being abused.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mQU/
-----END PGP SIGNATURE-----
Merge tag 'for-rc-adfs' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ADFS cleanups/fixes from Russell King:
"As a result of some of Al Viro's great work, here are a few cleanups
with fixes for adfs:
- factor out filename comparison, so we can be sure that
adfs_compare() (used for namei compare) and adfs_match() (used for
lookup) have the same behaviour.
- factor out filename lowering (which is not the same as tolower()
which will lower top-bit-set characters) to ensure that we have the
same behaviour when comparing filenames as when we hash them.
- factor out the object fixups, so we are applying all fixups to
directory objects in the same way, independent of the disk format.
- factor out the object name fixup (into the previously factored out
function) to ensure that filenames are appropriately translated -
for example, adfs allows '/' in filenames, which being the Unix
path separator, need to be translated to a different character,
which is normally '.' (DOS 8.3 filenames represent the . as a / on
adfs, so this is the expected reverse translation.)
- remove filename truncation; Al asked about this and apparently the
decision is to remove it. In any case, adfs's truncation was buggy,
so this rids us of that bug by removing the truncation feature.
- we now have only one location which adds the "filetype" suffix to
the filename, so there's no point that code being out of line.
- since we translate '/' into '.', an adfs filename of "/" or "//"
would end up being translated to "." and ".." which have special
meanings. In this case, change the first character to "^" to avoid
these special directory names being abused"
* tag 'for-rc-adfs' of git://git.armlinux.org.uk/~rmk/linux-arm:
fs/adfs: fix filename fixup handling for "/" and "//" names
fs/adfs: move append_filetype_suffix() into adfs_object_fixup()
fs/adfs: remove truncated filename hashing
fs/adfs: factor out filename fixup
fs/adfs: factor out object fixups
fs/adfs: factor out filename case lowering
fs/adfs: factor out filename comparison
Use a safe strscpy call to copy the ethtool stat strings into the
relevant buffers, instead of a memcpy that will be accessing
out-of-bound data.
Fixes: 118d6298f6 ("net: mvpp2: add ethtool GOP statistics")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the following tests last for several hours, the problem will occur.
Server:
rds-stress -r 1.1.1.16 -D 1M
Client:
rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M -T 30
The following will occur.
"
Starting up....
tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu
%
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
"
>From vmcore, we can find that clean_list is NULL.
>From the source code, rds_mr_flushd calls rds_ib_mr_pool_flush_worker.
Then rds_ib_mr_pool_flush_worker calls
"
rds_ib_flush_mr_pool(pool, 0, NULL);
"
Then in function
"
int rds_ib_flush_mr_pool(struct rds_ib_mr_pool *pool,
int free_all, struct rds_ib_mr **ibmr_ret)
"
ibmr_ret is NULL.
In the source code,
"
...
list_to_llist_nodes(pool, &unmap_list, &clean_nodes, &clean_tail);
if (ibmr_ret)
*ibmr_ret = llist_entry(clean_nodes, struct rds_ib_mr, llnode);
/* more than one entry in llist nodes */
if (clean_nodes->next)
llist_add_batch(clean_nodes->next, clean_tail, &pool->clean_list);
...
"
When ibmr_ret is NULL, llist_entry is not executed. clean_nodes->next
instead of clean_nodes is added in clean_list.
So clean_nodes is discarded. It can not be used again.
The workqueue is executed periodically. So more and more clean_nodes are
discarded. Finally the clean_list is NULL.
Then this problem will occur.
Fixes: 1bc144b625 ("net, rds, Replace xlist in net/rds/xlist.h with llist")
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Olivier Matz says:
====================
ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
The following code returns EFAULT (Bad address):
s = socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6);
setsockopt(s, SOL_IPV6, IPV6_HDRINCL, 1);
sendto(ipv6_icmp6_packet, addr); /* returns -1, errno = EFAULT */
The problem is fixed in the second patch. The first one aligns the
code to ipv4, to avoid a race condition in the second patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The following code returns EFAULT (Bad address):
s = socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6);
setsockopt(s, SOL_IPV6, IPV6_HDRINCL, 1);
sendto(ipv6_icmp6_packet, addr); /* returns -1, errno = EFAULT */
The IPv4 equivalent code works. A workaround is to use IPPROTO_RAW
instead of IPPROTO_ICMPV6.
The failure happens because 2 bytes are eaten from the msghdr by
rawv6_probe_proto_opt() starting from commit 19e3c66b52 ("ipv6
equivalent of "ipv4: Avoid reading user iov twice after
raw_probe_proto_opt""), but at that time it was not a problem because
IPV6_HDRINCL was not yet introduced.
Only eat these 2 bytes if hdrincl == 0.
Fixes: 715f504b11 ("ipv6: add IPV6_HDRINCL option for raw sockets")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As it was done in commit 8f659a03a0 ("net: ipv4: fix for a race
condition in raw_sendmsg") and commit 20b50d7997 ("net: ipv4: emulate
READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()") for ipv4, copy the
value of inet->hdrincl in a local variable, to avoid introducing a race
condition in the next commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
d9c9ce34ed ("x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails")
get_user_pages_unlocked() pre-faults user's memory if a write generates
a page fault while the handler is disabled.
This works in general and uncovered a bug as reported by Mike
Rapoport¹. It has been pointed out that this function may be fragile
and a simple pre-fault as in fault_in_pages_writeable() would be a
better solution. Better as in taste and simplicity: that write (as
performed by the alternative function) performs exactly the same
faulting of memory as before. This was suggested by Hugh Dickins and
Andrew Morton.
Use fault_in_pages_writeable() for pre-faulting user's stack.
[ bigeasy: Write commit message. ]
[ bp: Massage some. ]
¹ https://lkml.kernel.org/r/1557844195-18882-1-git-send-email-rppt@linux.ibm.com
Fixes: d9c9ce34ed ("x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails")
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: linux-mm <linux-mm@kvack.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190529072540.g46j4kfeae37a3iu@linutronix.de
Link: https://lkml.kernel.org/r/1557844195-18882-1-git-send-email-rppt@linux.ibm.com
Commit 87fd125344 ("nvme-rdma: remove redundant reference between
ib_device and tagset") caused a kernel panic when disconnecting from an
inaccessible controller (disconnect during re-connection).
--
nvme nvme0: Removing ctrl: NQN "testnqn1"
nvme_rdma: nvme_rdma_exit_request: hctx 0 queue_idx 1
BUG: unable to handle kernel paging request at 0000000080000228
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
...
Call Trace:
blk_mq_exit_hctx+0x5c/0xf0
blk_mq_exit_queue+0xd4/0x100
blk_cleanup_queue+0x9a/0xc0
nvme_rdma_destroy_io_queues+0x52/0x60 [nvme_rdma]
nvme_rdma_shutdown_ctrl+0x3e/0x80 [nvme_rdma]
nvme_do_delete_ctrl+0x53/0x80 [nvme_core]
nvme_sysfs_delete+0x45/0x60 [nvme_core]
kernfs_fop_write+0x105/0x180
vfs_write+0xad/0x1a0
ksys_write+0x5a/0xd0
do_syscall_64+0x55/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fa215417154
--
The reason for this crash is accessing an already freed ib_device for
performing dma_unmap during exit_request commands. The root cause for
that is that during re-connection all the queues are destroyed and
re-created (and the ib_device is reference counted by the queues and
freed as well) but the tagset stays alive and all the DMA mappings (that
we perform in init_request) kept in the request context. The original
commit fixed a different bug that was introduced during bonding (aka nic
teaming) tests that for some scenarios change the underlying ib_device
and caused memory leakage and possible segmentation fault. This commit
is a complementary commit that also changes the wrong DMA mappings that
were saved in the request context and making the request sqe dma
mappings dynamic with the command lifetime (i.e. mapped in .queue_rq and
unmapped in .complete). It also fixes the above crash of accessing freed
ib_device during destruction of the tagset.
Fixes: 87fd125344 ("nvme-rdma: remove redundant reference between ib_device and tagset")
Reported-by: Jim Harris <james.r.harris@intel.com>
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The Number of Namespaces (nn) field in the identify controller data structure is
defined as u32 and the maximum allowed value in NVMe specification is
0xFFFFFFFEUL. This change fixes the possible overflow of the DIV_ROUND_UP()
operation used in nvme_scan_ns_list() by casting the nn to u64.
Signed-off-by: Jaesoo Lee <jalee@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
This patch addresses below two issues and prepares the code to address
3rd issue listed below.
1. mdev device is placed on the mdev bus before it is created in the
vendor driver. Once a device is placed on the mdev bus without creating
its supporting underlying vendor device, mdev driver's probe() gets
triggered. However there isn't a stable mdev available to work on.
create_store()
mdev_create_device()
device_register()
...
vfio_mdev_probe()
[...]
parent->ops->create()
vfio_ap_mdev_create()
mdev_set_drvdata(mdev, matrix_mdev);
/* Valid pointer set above */
Due to this way of initialization, mdev driver who wants to use the mdev,
doesn't have a valid mdev to work on.
2. Current creation sequence is,
parent->ops_create()
groups_register()
Remove sequence is,
parent->ops->remove()
groups_unregister()
However, remove sequence should be exact mirror of creation sequence.
Once this is achieved, all users of the mdev will be terminated first
before removing underlying vendor device.
(Follow standard linux driver model).
At that point vendor's remove() ops shouldn't fail because taking the
device off the bus should terminate any usage.
3. When remove operation fails, mdev sysfs removal attempts to add the
file back on already removed device. Following call trace [1] is observed.
[1] call trace:
kernel: WARNING: CPU: 2 PID: 9348 at fs/sysfs/file.c:327 sysfs_create_file_ns+0x7f/0x90
kernel: CPU: 2 PID: 9348 Comm: bash Kdump: loaded Not tainted 5.1.0-rc6-vdevbus+ #6
kernel: Hardware name: Supermicro SYS-6028U-TR4+/X10DRU-i+, BIOS 2.0b 08/09/2016
kernel: RIP: 0010:sysfs_create_file_ns+0x7f/0x90
kernel: Call Trace:
kernel: remove_store+0xdc/0x100 [mdev]
kernel: kernfs_fop_write+0x113/0x1a0
kernel: vfs_write+0xad/0x1b0
kernel: ksys_write+0x5a/0xe0
kernel: do_syscall_64+0x5a/0x210
kernel: entry_SYSCALL_64_after_hwframe+0x49/0xbe
Therefore, mdev core is improved in following ways.
1. Split the device registration/deregistration sequence so that some
things can be done between initialization of the device and hooking it
up to the bus respectively after deregistering it from the bus but
before giving up our final reference.
In particular, this means invoking the ->create() and ->remove()
callbacks in those new windows. This gives the vendor driver an
initialized mdev device to work with during creation.
At the same time, a bus driver who wish to bind to mdev driver also
gets initialized mdev device.
This follows standard Linux kernel bus and device model.
2. During remove flow, first remove the device from the bus. This
ensures that any bus specific devices are removed.
Once device is taken off the mdev bus, invoke remove() of mdev
from the vendor driver.
3. The driver core device model provides way to register and auto
unregister the device sysfs attribute groups at dev->groups.
Make use of dev->groups to let core create the groups and eliminate
code to avoid explicit groups creation and removal.
To ensure, that new sequence is solid, a below stack dump of a
process is taken who attempts to remove the device while device is in
use by vfio driver and user application.
This stack dump validates that vfio driver guards against such device
removal when device is in use.
cat /proc/21962/stack
[<0>] vfio_del_group_dev+0x216/0x3c0 [vfio]
[<0>] mdev_remove+0x21/0x40 [mdev]
[<0>] device_release_driver_internal+0xe8/0x1b0
[<0>] bus_remove_device+0xf9/0x170
[<0>] device_del+0x168/0x350
[<0>] mdev_device_remove_common+0x1d/0x50 [mdev]
[<0>] mdev_device_remove+0x8c/0xd0 [mdev]
[<0>] remove_store+0x71/0x90 [mdev]
[<0>] kernfs_fop_write+0x113/0x1a0
[<0>] vfs_write+0xad/0x1b0
[<0>] ksys_write+0x5a/0xe0
[<0>] do_syscall_64+0x5a/0x210
[<0>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<0>] 0xffffffffffffffff
This prepares the code to eliminate calling device_create_file() in
subsequent patch.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When we call snd_soc_component_set_jack(component, NULL, NULL) we should
set rt274->jack to passed jack, so when interrupt is triggered it calls
snd_soc_jack_report(rt274->jack, ...) with proper value.
This fixes problem in machine where in register, we call
snd_soc_register(component, &headset, NULL), which just calls
rt274_mic_detect via callback.
Now when machine driver is removed "headset" will be gone, so we
need to tell codec driver that it's gone with:
snd_soc_register(component, NULL, NULL), but we also need to be able
to handle NULL jack argument here gracefully.
If we don't set it to NULL, next time the rt274_irq runs it will call
snd_soc_jack_report with first argument being invalid pointer and there
will be Oops.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
During the integration of HDaudio support, we changed the way in which
we get hdev in snd_hdac_ext_bus_device_init() to use one preallocated
with devm_kzalloc(), however it still left kfree(hdev) in
snd_hdac_ext_bus_device_exit(). It leads to oopses when trying to
rmmod and modprobe. Fix it, by just removing kfree call.
SOF also uses some of the snd_hdac_ functions for HDAudio support but
allocated the memory with kzalloc. A matching fix is provided
separately to align all users of the snd_hdac_ library.
Fixes: 6298542fa3 ("ALSA: hdac: remove memory allocation from snd_hdac_ext_bus_device_init")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are already defined ppcap and ppcap interrupt functions, use
the already defined functions for easy code read.
Fixes: 8a300c8fb1 ("ASoC: SOF: Intel: Add HDA controller for Intel DSP")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kernel crashes when an ASoC component rebinding.
The dai_link->platforms has been reset to NULL by soc_cleanup_platform()
in soc_cleanup_card_resources() when un-registering component. However,
it has no chance to re-allocate the dai_link->platforms when registering
the component again.
Move the DAI pre-links initiation from snd_soc_register_card() to
snd_soc_instantiate_card() to make sure all DAI pre-links get initiated
when component rebinding.
As an example, by using the following commands:
- echo -n max98357a > /sys/bus/platform/drivers/max98357a/unbind
- echo -n max98357a > /sys/bus/platform/drivers/max98357a/bind
Got the error message:
"Unable to handle kernel NULL pointer dereference at virtual address".
The call trace:
snd_soc_is_matching_component+0x30/0x6c
soc_bind_dai_link+0x16c/0x240
snd_soc_bind_card+0x1e4/0xb10
snd_soc_add_component+0x270/0x300
snd_soc_register_component+0x54/0x6c
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform override code uses devm_ functions to allocate memory for
the new name but the card device is not initialized. Fix by moving the
init earlier.
Fixes: f403906da0 ("ASoC: Intel: cht_bsw_rt5672: platform name fixup support")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform override code uses devm_ functions to allocate memory for
the new name but the card device is not initialized. Fix by moving the
init earlier.
Fixes: 4506db8043 ("ASoC: Intel: cht_bsw_nau8824: platform name fixup support")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform override code uses devm_ functions to allocate memory for
the new name but the card device is not initialized. Fix by moving the
init earlier.
Fixes: e4bc6b1195 ("ASoC: Intel: bytcht_es8316: platform name fixup support")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform override code uses devm_ functions to allocate memory for
the new name but the card device is not initialized. Fix by moving the
init earlier.
Fixes: 7e7e24d7c7 ("ASoC: Intel: cht_bsw_max98090_ti: platform name fixup support")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 73118ca8ba introduced a glock reference counting bug in
gfs2_trans_remove_revoke. Given that, replacing gl_revokes with a GLF flag is
no longer useful, so revert that commit.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Oded writes:
This tag contains the following fixes:
- Fix the code that checks whether we can use 2MB page size when mapping
memory in the ASIC's MMU. The current code had a "hole" which happened
in architectures other then x86-64.
- Fix the debugfs interface to read/write from/to the device using device
virtual addresses. There was a bug in the translation regarding
addresses that were mapped using 2MB page size.
- Fix a bug in the debug/profiling code, where the code didn't read the
full address but only the lower 32-bits of the address.
* tag 'misc-habanalabs-fixes-2019-06-06' of git://people.freedesktop.org/~gabbayo/linux:
habanalabs: Read upper bits of trace buffer from RWPHI
habanalabs: Fix virtual address access via debugfs for 2MB pages
habanalabs: fix bug in checking huge page optimization
Since GCC 9, the compiler warns about evolution of the
platform-specific ABI, in particular relating for the marshaling of
certain structures involving bitfields.
The kernel is a standalone binary, and of course nobody would be
so stupid as to expose structs containing bitfields as function
arguments in ABI. (Passing a pointer to such a struct, however
inadvisable, should be unaffected by this change. perf and various
drivers rely on that.)
So these warnings do more harm than good: turn them off.
We may miss warnings about future ABI drift, but that's too bad.
Future ABI breaks of this class will have to be debugged and fixed
the traditional way unless the compiler evolves finer-grained
diagnostics.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
According to the found documentation, data cache flushes and sync
instructions are needed on the PCX-U+ (PA8200, e.g. C200/C240)
platforms, while PCX-W (PA8500, e.g. C360) platforms aparently don't
need those flushes when changing the IO PDIR data structures.
We have no documentation for PCX-W+ (PA8600) and PCX-W2 (PA8700) CPUs,
but Carlo Pisani reported that his C3600 machine (PA8600, PCX-W+) fails
when the fdc instructions were removed. His firmware didn't set the NIOP
bit, so one may assume it's a firmware bug since other C3750 machines
had the bit set.
Even if documentation (as mentioned above) states that PCX-W (PA8500,
e.g. J5000) does not need fdc flushes, Sven could show that an Adaptec
29320A PCI-X SCSI controller reliably failed on a dd command during the
first five minutes in his J5000 when fdc flushes were missing.
Going forward, we will now NOT replace the fdc and sync assembler
instructions by NOPS if:
a) the NP iopdir_fdc bit was set by firmware, or
b) we find a CPU up to and including a PCX-W+ (PA8600).
This fixes the HPMC crashes on a C240 and C36XX machines. For other
machines we rely on the firmware to set the bit when needed.
In case one finds HPMC issues, people could try to boot their machines
with the "no-alternatives" kernel option to turn off any alternative
patching.
Reported-by: Sven Schnelle <svens@stackframe.org>
Reported-by: Carlo Pisani <carlojpisani@gmail.com>
Tested-by: Sven Schnelle <svens@stackframe.org>
Fixes: 3847dab774 ("parisc: Add alternative coding infrastructure")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 5.0+
Most I/O in the kernel is done using the kernel offset mapping.
However, there is one API that uses aliased kernel address ranges:
> The final category of APIs is for I/O to deliberately aliased address
> ranges inside the kernel. Such aliases are set up by use of the
> vmap/vmalloc API. Since kernel I/O goes via physical pages, the I/O
> subsystem assumes that the user mapping and kernel offset mapping are
> the only aliases. This isn't true for vmap aliases, so anything in
> the kernel trying to do I/O to vmap areas must manually manage
> coherency. It must do this by flushing the vmap range before doing
> I/O and invalidating it after the I/O returns.
For this reason, we should use the hardware lpa instruction to load the
physical address of kernel virtual addresses in the driver code.
I believe we only use the vmap/vmalloc API with old PA 1.x processors
which don't have a sba, so we don't hit this problem.
Tested on c3750, c8000 and rp3440.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a57 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Helge Deller <deller@gmx.de>
We only support I/O to kernel space. Using %sr1 to load the coherence
index may be racy unless interrupts are disabled. This patch changes the
code used to load the coherence index to use implicit space register
selection. This saves one instruction and eliminates the race.
Tested on rp3440, c8000 and c3750.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
This issue was detected by using the Coccinelle software.
Fixes: 408b56ca5c ("usb: gadget: udc: lpc32xx: simplify probe")
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
The patch 10209abe87
usb: dwc2: gadget: Add scatter-gather mode
avoided a NULL pointer dereference (hs_ep->req == NULL) by
calling dwc2_gadget_fill_nonisoc_xfer_dma_one() directly instead of through
the dwc2_gadget_config_nonisoc_xfer_ddma() wrapper, which unconditionally
dereferenced the said pointer.
However, this was based on an incorrect assumption that in the context of
dwc2_hsotg_program_zlp() the pointer is always NULL, which is not the case.
The result were SB CV MSC tests failing starting from Test Case 6.
Instead, this patch reverts to calling the wrapper and adds a check for
the pointer being NULL inside the wrapper.
Fixes: 10209abe87 (usb: dwc2: gadget: Add scatter-gather mode)
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
On ISOC OUT transfer completion, in none DDMA mode, set actual frame
number returning to function driver in usb_request.
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Gadget drivers may queue request in interrupt context. This would lead to
a descriptor allocation in that context. In that case we would hit
BUG_ON(in_interrupt()) in __get_vm_area_node.
Also remove the unnecessary cast.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Tested-by: James Grant <jamesg@zaltys.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
There is no deallocation of fusb300->ep[i] elements, allocated at
fusb300_probe.
The patch adds deallocation of fusb300->ep array elements.
Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Since this driver already handles changer detction state, copy the
workaround code currently residing in arch/arm/mach-imx/anatop.c into
this drier to consolidate the places modifying it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Insert a padding between data and the stored_xfer_buffer pointer to
ensure they are not on the same cache line.
Otherwise, the stored_xfer_buffer gets corrupted for IN URBs on
non-cache-coherent systems. (In my case: Lantiq xRX200 MIPS)
Fixes: 3bc04e28a0 ("usb: dwc2: host: Get aligned DMA in a more supported way")
Fixes: 56406e017a ("usb: dwc2: Fix DMA alignment to start at allocated boundary")
Cc: <stable@vger.kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
In commit abb621844f ("usb: ch9: make usb_endpoint_maxp() return
only packet size") the API to usb_endpoint_maxp() changed. It used to
just return wMaxPacketSize but after that commit it returned
wMaxPacketSize with the high bits (the multiplier) masked off. If you
wanted to get the multiplier it was now up to your code to call the
new usb_endpoint_maxp_mult() which was introduced in
commit 541b6fe630 ("usb: add helper to extract bits 12:11 of
wMaxPacketSize").
Prior to the API change most host drivers were updated, but no update
was made to dwc2. Presumably it was assumed that dwc2 was too
simplistic to use the multiplier and thus just didn't support a
certain class of USB devices. However, it turns out that dwc2 did use
the multiplier and many devices using it were working quite nicely.
That means that many USB devices have been broken since the API
change. One such device is a Logitech HD Pro Webcam C920.
Specifically, though dwc2 didn't directly call usb_endpoint_maxp(), it
did call usb_maxpacket() which in turn called usb_endpoint_maxp().
Let's update dwc2 to work properly with the new API.
Fixes: abb621844f ("usb: ch9: make usb_endpoint_maxp() return only packet size")
Cc: stable@vger.kernel.org
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Fix a s/TIF_SECOMP/TIF_SECCOMP/ comment typo
Cc: Jiri Kosina <trivial@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We need to check whether drm_atomic_get_crtc_state() returns an error
pointer before dereferencing "crtc_st".
Fixes: 9e56030941 ("drm/komeda: Add komeda_plane/plane_helper_funcs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: "james qian wang (Arm Technology China)" <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/arm/display/komeda/komeda_plane.c: In function komeda_plane_atomic_check:
drivers/gpu/drm/arm/display/komeda/komeda_plane.c:49:22: warning: variable kcrtc set but not used [-Wunused-but-set-variable]
It is never used since introduction in
commit 9e56030941 ("drm/komeda: Add komeda_plane/plane_helper_funcs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Add the CPUID model numbers of Icelake (ICL) desktop and server
processors to the Intel family list.
[ Qiuxu: Sort the macros by model number. ]
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Cc: rui.zhang@intel.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190603134122.13853-1-kan.liang@linux.intel.com
Some chips have attributes which exist on more than one page but the
attribute is not presently marked as paged. This causes the attributes
to be generated with the same label, which makes it impossible for
userspace to tell them apart.
Marking all such attributes as paged would result in the page suffix
being added regardless of whether they were present on more than one
page or not, which might break existing setups. Therefore, we add a
second check which treats the attribute as paged, even if not marked as
such, if it is present on multiple pages.
Fixes: b4ce237b7f ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers")
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
update_lock is a mutex intended to protect write operations. It was not
taken, however, when _pmbus_write_word_data is called from
pmbus_set_samples() function which may cause problems especially when
some PMBUS_VIRT_* operation is implemented as a read-modify-write cycle.
This patch makes sure the lock is held during the operation.
Fixes: 49c4455dcc ("hwmon: (pmbus) Introduce PMBUS_VIRT_*_SAMPLES registers")
Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
[groeck: Declared and initialized missing 'data' variable]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Drivers may register to hwmon and request for also registering
with the thermal subsystem (HWMON_C_REGISTER_TZ). However,
some of these driver, e.g. marvell phy, may be probed from
Device Tree or being dynamically allocated, and in the later
case, it will not have a dev->of_node entry.
Registering with hwmon without the dev->of_node may result in
different outcomes depending on the device tree, which may
be a bit misleading. If the device tree blob has no 'thermal-zones'
node, the *hwmon_device_register*() family functions are going
to gracefully succeed, because of-thermal,
*thermal_zone_of_sensor_register() return -ENODEV in this case,
and the hwmon error path handles this error code as success to
cover for the case where CONFIG_THERMAL_OF is not set.
However, if the device tree blob has the 'thermal-zones'
entry, the *hwmon_device_register*() will always fail on callers
with no dev->of_node, propagating -EINVAL.
If dev->of_node is not present, calling of-thermal does not
make sense. For this reason, this patch checks first if the
device has a of_node before going over the process of registering
with the thermal subsystem of-thermal interface. And in this case,
when a caller of *hwmon_device_register*() with HWMON_C_REGISTER_TZ
and no dev->of_node will still register with hwmon, but not with
the thermal subsystem. If all the hwmon part bits are in place,
the registration will succeed.
Fixes: d560168b5d ("hwmon: (core) New hwmon registration API")
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduval@amazon.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This reverts commit e9919a24d3.
Nathan reported the new behaviour breaks Android, as Android just add
new rules and delete old ones.
If we return 0 without adding dup rules, Android will remove the new
added rules and causing system to soft-reboot.
Fixes: e9919a24d3 ("fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Yaro Slav <yaro330@gmail.com>
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WoL magic packet configuration sometimes does not work due to
couple of leakages found.
Mainly there was a regression introduced during readx_poll refactoring.
Next, fw request waiting time was too small. Sometimes that
caused sleep proxy config function to return with an error
and to skip WoL configuration.
At last, WoL data were passed to FW from not clean buffer.
That could cause FW to accept garbage as a random configuration data.
Fixes: 6a7f227731 ("net: aquantia: replace AQ_HW_WAIT_FOR with readx_poll_timeout_atomic")
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ethtool_get_regs() allocates a buffer of size ops->get_regs_len(),
and pass it to the kernel driver via ops->get_regs() for filling.
There is no restriction about what the kernel drivers can or cannot do
with the open ethtool_regs structure. They usually set regs->version
and ignore regs->len or set it to the same size as ops->get_regs_len().
But if userspace allocates a smaller buffer for the registers dump,
we would cause a userspace buffer overflow in the final copy_to_user()
call, which uses the regs.len value potentially reset by the driver.
To fix this, make this case obvious and store regs.len before calling
ops->get_regs(), to only copy as much data as requested by userspace,
up to the value returned by ops->get_regs_len().
While at it, remove the redundant check for non-null regbuf.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot found the following leak in sctp_process_init
BUG: memory leak
unreferenced object 0xffff88810ef68400 (size 1024):
comm "syz-executor273", pid 7046, jiffies 4294945598 (age 28.770s)
hex dump (first 32 bytes):
1d de 28 8d de 0b 1b e3 b5 c2 f9 68 fd 1a 97 25 ..(........h...%
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000a02cebbd>] kmemleak_alloc_recursive include/linux/kmemleak.h:55
[inline]
[<00000000a02cebbd>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<00000000a02cebbd>] slab_alloc mm/slab.c:3326 [inline]
[<00000000a02cebbd>] __do_kmalloc mm/slab.c:3658 [inline]
[<00000000a02cebbd>] __kmalloc_track_caller+0x15d/0x2c0 mm/slab.c:3675
[<000000009e6245e6>] kmemdup+0x27/0x60 mm/util.c:119
[<00000000dfdc5d2d>] kmemdup include/linux/string.h:432 [inline]
[<00000000dfdc5d2d>] sctp_process_init+0xa7e/0xc20
net/sctp/sm_make_chunk.c:2437
[<00000000b58b62f8>] sctp_cmd_process_init net/sctp/sm_sideeffect.c:682
[inline]
[<00000000b58b62f8>] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1384
[inline]
[<00000000b58b62f8>] sctp_side_effects net/sctp/sm_sideeffect.c:1194
[inline]
[<00000000b58b62f8>] sctp_do_sm+0xbdc/0x1d60 net/sctp/sm_sideeffect.c:1165
[<0000000044e11f96>] sctp_assoc_bh_rcv+0x13c/0x200
net/sctp/associola.c:1074
[<00000000ec43804d>] sctp_inq_push+0x7f/0xb0 net/sctp/inqueue.c:95
[<00000000726aa954>] sctp_backlog_rcv+0x5e/0x2a0 net/sctp/input.c:354
[<00000000d9e249a8>] sk_backlog_rcv include/net/sock.h:950 [inline]
[<00000000d9e249a8>] __release_sock+0xab/0x110 net/core/sock.c:2418
[<00000000acae44fa>] release_sock+0x37/0xd0 net/core/sock.c:2934
[<00000000963cc9ae>] sctp_sendmsg+0x2c0/0x990 net/sctp/socket.c:2122
[<00000000a7fc7565>] inet_sendmsg+0x64/0x120 net/ipv4/af_inet.c:802
[<00000000b732cbd3>] sock_sendmsg_nosec net/socket.c:652 [inline]
[<00000000b732cbd3>] sock_sendmsg+0x54/0x70 net/socket.c:671
[<00000000274c57ab>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2292
[<000000008252aedb>] __sys_sendmsg+0x80/0xf0 net/socket.c:2330
[<00000000f7bf23d1>] __do_sys_sendmsg net/socket.c:2339 [inline]
[<00000000f7bf23d1>] __se_sys_sendmsg net/socket.c:2337 [inline]
[<00000000f7bf23d1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2337
[<00000000a8b4131f>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:3
The problem was that the peer.cookie value points to an skb allocated
area on the first pass through this function, at which point it is
overwritten with a heap allocated value, but in certain cases, where a
COOKIE_ECHO chunk is included in the packet, a second pass through
sctp_process_init is made, where the cookie value is re-allocated,
leaking the first allocation.
Fix is to always allocate the cookie value, and free it when we are done
using it.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com
CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When KASAN is enabled, after several rds connections are
created, then "rmmod rds_rdma" is run. The following will
appear.
"
BUG rds_ib_incoming (Not tainted): Objects remaining
in rds_ib_incoming on __kmem_cache_shutdown()
Call Trace:
dump_stack+0x71/0xab
slab_err+0xad/0xd0
__kmem_cache_shutdown+0x17d/0x370
shutdown_cache+0x17/0x130
kmem_cache_destroy+0x1df/0x210
rds_ib_recv_exit+0x11/0x20 [rds_rdma]
rds_ib_exit+0x7a/0x90 [rds_rdma]
__x64_sys_delete_module+0x224/0x2c0
? __ia32_sys_delete_module+0x2c0/0x2c0
do_syscall_64+0x73/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
"
This is rds connection memory leak. The root cause is:
When "rmmod rds_rdma" is run, rds_ib_remove_one will call
rds_ib_dev_shutdown to drop the rds connections.
rds_ib_dev_shutdown will call rds_conn_drop to drop rds
connections as below.
"
rds_conn_path_drop(&conn->c_path[0], false);
"
In the above, destroy is set to false.
void rds_conn_path_drop(struct rds_conn_path *cp, bool destroy)
{
atomic_set(&cp->cp_state, RDS_CONN_ERROR);
rcu_read_lock();
if (!destroy && rds_destroy_pending(cp->cp_conn)) {
rcu_read_unlock();
return;
}
queue_work(rds_wq, &cp->cp_down_w);
rcu_read_unlock();
}
In the above function, destroy is set to false. rds_destroy_pending
is called. This does not move rds connections to ib_nodev_conns.
So destroy is set to true to move rds connections to ib_nodev_conns.
In rds_ib_unregister_client, flush_workqueue is called to make rds_wq
finsh shutdown rds connections. The function rds_ib_destroy_nodev_conns
is called to shutdown rds connections finally.
Then rds_ib_recv_exit is called to destroy slab.
void rds_ib_recv_exit(void)
{
kmem_cache_destroy(rds_ib_incoming_slab);
kmem_cache_destroy(rds_ib_frag_slab);
}
The above slab memory leak will not occur again.
>From tests,
256 rds connections
[root@ca-dev14 ~]# time rmmod rds_rdma
real 0m16.522s
user 0m0.000s
sys 0m8.152s
512 rds connections
[root@ca-dev14 ~]# time rmmod rds_rdma
real 0m32.054s
user 0m0.000s
sys 0m15.568s
To rmmod rds_rdma with 256 rds connections, about 16 seconds are needed.
And with 512 rds connections, about 32 seconds are needed.
>From ftrace, when one rds connection is destroyed,
"
19) | rds_conn_destroy [rds]() {
19) 7.782 us | rds_conn_path_drop [rds]();
15) | rds_shutdown_worker [rds]() {
15) | rds_conn_shutdown [rds]() {
15) 1.651 us | rds_send_path_reset [rds]();
15) 7.195 us | }
15) + 11.434 us | }
19) 2.285 us | rds_cong_remove_conn [rds]();
19) * 24062.76 us | }
"
So if many rds connections will be destroyed, this function
rds_ib_destroy_nodev_conns uses most of time.
Suggested-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
