95ab0e8768
28608 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
|
95ab0e8768 |
Changes for this cycle were:
- Fix address filtering for Intel/PT,ARM/CoreSight - Enable Intel/PEBS format 5 - Allow more fixed-function counters for x86 - Intel/PT: Enable not recording Taken-Not-Taken packets - Add a few branch-types Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmI4WdIRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jdTA/7BADTYzFCbdwPzHt2mR8osv7k+pDvYxs9 wxNjyi1X7N8cPkhqgIg9CfdhdyDOqo7+J4fG17f2qbwjNK7b2Fb1/U6ZoZaf+f8F W0e2LX5KZTXUhkA+TEjrXvYD9FmJaCPM/l2RQg8U7okBs2kb0H6QT2Yn21wd1roC WwI5KFiWSVS1IzpVLaXjDh+FJfJHd75ReMqJeus+QoVQ9NHeuI+t4DglSB1IBi54 d/zeVXE/Y4dFTQOrU06S2HxcOEptvXZsPmVLvKab/veeGGyWiGPxQpvu6bXm6u3x 0sV+dn67zut2m2pQlUZUucgGTSYIZTpOe+rNukTB9hJ4XeN4/1ohOOCrOuYM+63P lGFbN1v+LD7Wc6C2eEhw8G5GEL0qbwzFNQ06O3EOFi7C7GKn7WS/ET6XuuMOERFk uxEPb4pFtbBlJ0SriCprFJSd5NL3PORZlLIhv4hGH5hilLR1TFeKDuwZaM4noQxU dL3rKGLi9H+P46Eni9H28+0gDISbv1xL+WivHOFQNmhBqAZO52ZcF3J+dgBaR1B5 pBxVTycFpZMjxSZnqTE0gMsFaLIpVGc+75Chns1rajR0mEtRtJUQUbYz4tK4zb0E dZR1p+VF6+DYmSRhiqeaTi9uz9oE8kMa8o/EcbFIg/9BgEnUwJXU20bjnar30xQ7 9OIn7r9hjHI= =XPuo -----END PGP SIGNATURE----- Merge tag 'perf-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf event updates from Ingo Molnar: - Fix address filtering for Intel/PT,ARM/CoreSight - Enable Intel/PEBS format 5 - Allow more fixed-function counters for x86 - Intel/PT: Enable not recording Taken-Not-Taken packets - Add a few branch-types * tag 'perf-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Fix the build on !CONFIG_PHYS_ADDR_T_64BIT perf: Add irq and exception return branch types perf/x86/intel/uncore: Make uncore_discovery clean for 64 bit addresses perf/x86/intel/pt: Add a capability and config bit for disabling TNTs perf/x86/intel/pt: Add a capability and config bit for event tracing perf/x86/intel: Increase max number of the fixed counters KVM: x86: use the KVM side max supported fixed counter perf/x86/intel: Enable PEBS format 5 perf/core: Allow kernel address filter when not filtering the kernel perf/x86/intel/pt: Fix address filter config for 32-bit kernel perf/core: Fix address filter parser for multiple filters x86: Share definition of __is_canonical_address() perf/x86/intel/pt: Relax address filter validation |
||
|
b7a801f395 |
execve updates for v5.18-rc1
- Handle unusual AT_PHDR offsets (Akira Kawata) - Fix initial mapping size when PT_LOADs are not ordered (Alexey Dobriyan) - Move more code under CONFIG_COREDUMP (Alexey Dobriyan) - Fix missing mmap_lock in file_files_note (Eric W. Biederman) - Remove a.out support for alpha and m68k (Eric W. Biederman) - Include first pages of non-exec ELF libraries in coredump (Jann Horn) - Don't write past end of notes for regset gap in coredump (Rick Edgecombe) - Comment clean-ups (Tom Rix) - Force single empty string when argv is empty (Kees Cook) - Add NULL argv selftest (Kees Cook) - Properly redefine PT_GNU_* in terms of PT_LOOS (Kees Cook) - MAINTAINERS: Update execve entry with tree (Kees Cook) - Introduce initial KUnit testing for binfmt_elf (Kees Cook) -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmI4ji4WHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJi7VD/9o+PndYkeGclL7sYfouhSzK21W go4SGCrTl0oK/mfz3qXVYeS4VFjNTCTEs8rSZdjHN8a9VAVSJ38z6FPwbSQobzEP zXPuvwxe4GM4jb8FsBTcTEl1Wfw6kUV9JHXqFje6MuiZMXa8YDD+UMl95CgmGi1L 5sOw4quHXkG8nlC0v1PI9XSpmzK2nHmXBWVddnPXTUmEfitvoIJdf0iTJ4/4mYM/ OwrCiufGHvGtQFUrYTxgiZ3nvFdAkZDt+P8GA8NJOBCMDTPvsk57uTok1sW6CRFT lSymgoc3SczBtHYO6nFl5U04XGsNY+iHYhjhNL10IoucdCvS2VS0vEb8ZXKg6wtQ /tbgf1Mcfu7eoClA0ZjQX/pQbkPYL/s++Lwkc7pzknbmdwq+1yZF1+4Y1XItR4jJ kUhVsewQuU0os7BnaREkFOcwqXfA4hixb9w79p+SjMX8/XrnSkLJ3cFswkGTUxdO DOwhVcmqsZdVXMMk0R3oOtm9ABSp/FqvT8At2kZI0W93jhZGHWzOrU+psnkTUcDt KpFEJzdoh4ImZvBK8F5f07dAlqeVEZvVDhBt+x1Wxcu90p7rmZJT8OV2mJCDVhZG E2PW7UuLOAbgRM+E+gxz7SkpIMtOSFlxT2xGuygcRbIxOOeVnj1x9NwGdI9xcgpF s021x7TcHbpvYakRsg== =SyEY -----END PGP SIGNATURE----- Merge tag 'execve-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: "Execve and binfmt updates. Eric and I have stepped up to be the active maintainers of this area, so here's our first collection. The bulk of the work was in coredump handling fixes; additional details are noted below: - Handle unusual AT_PHDR offsets (Akira Kawata) - Fix initial mapping size when PT_LOADs are not ordered (Alexey Dobriyan) - Move more code under CONFIG_COREDUMP (Alexey Dobriyan) - Fix missing mmap_lock in file_files_note (Eric W. Biederman) - Remove a.out support for alpha and m68k (Eric W. Biederman) - Include first pages of non-exec ELF libraries in coredump (Jann Horn) - Don't write past end of notes for regset gap in coredump (Rick Edgecombe) - Comment clean-ups (Tom Rix) - Force single empty string when argv is empty (Kees Cook) - Add NULL argv selftest (Kees Cook) - Properly redefine PT_GNU_* in terms of PT_LOOS (Kees Cook) - MAINTAINERS: Update execve entry with tree (Kees Cook) - Introduce initial KUnit testing for binfmt_elf (Kees Cook)" * tag 'execve-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt_elf: Don't write past end of notes for regset gap a.out: Stop building a.out/osf1 support on alpha and m68k coredump: Don't compile flat_core_dump when coredumps are disabled coredump: Use the vma snapshot in fill_files_note coredump/elf: Pass coredump_params into fill_note_info coredump: Remove the WARN_ON in dump_vma_snapshot coredump: Snapshot the vmas in do_coredump coredump: Move definition of struct coredump_params into coredump.h binfmt_elf: Introduce KUnit test ELF: Properly redefine PT_GNU_* in terms of PT_LOOS MAINTAINERS: Update execve entry with more details exec: cleanup comments fs/binfmt_elf: Refactor load_elf_binary function fs/binfmt_elf: Fix AT_PHDR for unusual ELF files binfmt: move more stuff undef CONFIG_COREDUMP selftests/exec: Test for empty string on NULL argv exec: Force single empty string when argv is empty coredump: Also dump first pages of non-executable ELF libraries ELF: fix overflow in total mapping size calculation |
||
|
f648372dfe |
Thermal control updates for 5.18-rc1
- Add a new thermal driver for the Intel Hardware Feedback Interface (HFI) including the HFI initialization, HFI notification interrupt handling and sending CPU capabilities change messages to user space via the thermal netlink interface (Ricardo Neri, Srinivas Pandruvada, Nathan Chancellor, Randy Dunlap). - Extend the intel-speed-select utility to handle out-of-band CPU configuration changes and add support for the CPU capabilities change messages sent over the thermal netlink interface by the new HFI thermal driver to it (Srinivas Pandruvada). - Convert the DT bindings to yaml format for the Exynos platform and fix and update the MAINTAINERS file for this driver (Krzysztof Kozlowski). - Register the thermal zones as HWmon sensors for the QCom's Tsens driver and TI thermal platforms (Dmitry Baryshkov, Romain Naour). - Add the msm8953 compatible documentation in the bindings (Luca Weiss). - Add the sm8150 platform support to the QCom LMh driver's DT binding (Thara Gopinath). - Check the command result from the IPC command to the BPMP in the Tegra driver (Mikko Perttunen). - Silence the error for normal configuration where the interrupt is optionnal in the Broadcom thermal driver (Florian Fainelli). - Remove remaining dead code from the TI thermal driver (Yue Haibing). - Don't use bitmap_weight() in end_power_clamp() in the powerclamp driver (Yury Norov). - Update the OS policy capabilities handshake in the int340x thermal driver (Srinivas Pandruvada). - Increase the policies bitmap size in int340x (Srinivas Pandruvada). - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the int340x thermal driver (Rafael Wysocki). - Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang). - Add Intel Dynamic Power and Thermal Framework (DPTF) kernel interface documentation (Srinivas Pandruvada). - Fix bullet list warning in the thermal documentation (Randy Dunlap). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmI4pU8SHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRx47oP+gJMvi3IT/yaN4wyxoT6OeM8A8qPNQIw A6olZeL5/t1tp3jPU5qJ498q9W6vokovdqklAya4eqChmPboVk11A3TJ+dhflIRU NxaXIKTueNh5AwD08O9jhJJCJEejsb2i7lzWkJKMM/S3eZCciZU9ac4C5WVi3DqM F7WL62vhzsknsuTtCw9KLufmI3+NUFW98nS/B2EmesZs1WLfEnrEajYTvzgJRXQH qiO6x6fK4HJWP8D7XYxNwGpRObfRFOIkZYt40iXsV8s1fsdcEcKUnXpCviOg3tQ8 mLE+xqnpAKxaGmrI8QZr6863/NyG5dN8A3hk6ZbTN7vWnyVLmRIzs8XZ8hoPycmH LeEGn/LV1td1qrJykRemCYzJCfmXF2k0b6MjJGxgUQ7UItlBXr2pVRWXCFlY+Ekh 9ahZ7/2BSwdaW5DHbseZIIvF/rsCq0/i4+xV2JizM7ufnlFRx+6jP68KLDQxjwgp ZparKMYI/8zEgMq3x3tlvh5JsK4M0kA95NC+bsov4gNh0jbrm+CL92g5PuDLXAby RlW8Fmvx1px1n6IEoeLAtbTdQVJwqyNWUyVIhrXkJVGBkCcupCAfuMY9s6woKemf IXr1n/tjKG3hxuh/NTgAKYvIKaWSNF1ZIdNGbvgpzEGL+p26y96qhJYFlNBthXy9 v/4V8qFn0w6R =6PYL -----END PGP SIGNATURE----- Merge tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "As far as new functionality is concerned, there is a new thermal driver for the Intel Hardware Feedback Interface (HFI) along with some intel-speed-select utility changes to support it. There are also new DT compatible strings for a couple of platforms, and thermal zones on some platforms will be registered as HWmon sensors now. Apart from the above, some drivers are updated (fixes mostly) and there is a new piece of documentation for the Intel DPTF (Dynamic Power and Thermal Framework) sysfs interface. Specifics: - Add a new thermal driver for the Intel Hardware Feedback Interface (HFI) including the HFI initialization, HFI notification interrupt handling and sending CPU capabilities change messages to user space via the thermal netlink interface (Ricardo Neri, Srinivas Pandruvada, Nathan Chancellor, Randy Dunlap). - Extend the intel-speed-select utility to handle out-of-band CPU configuration changes and add support for the CPU capabilities change messages sent over the thermal netlink interface by the new HFI thermal driver to it (Srinivas Pandruvada). - Convert the DT bindings to yaml format for the Exynos platform and fix and update the MAINTAINERS file for this driver (Krzysztof Kozlowski). - Register the thermal zones as HWmon sensors for the QCom's Tsens driver and TI thermal platforms (Dmitry Baryshkov, Romain Naour). - Add the msm8953 compatible documentation in the bindings (Luca Weiss). - Add the sm8150 platform support to the QCom LMh driver's DT binding (Thara Gopinath). - Check the command result from the IPC command to the BPMP in the Tegra driver (Mikko Perttunen). - Silence the error for normal configuration where the interrupt is optionnal in the Broadcom thermal driver (Florian Fainelli). - Remove remaining dead code from the TI thermal driver (Yue Haibing). - Don't use bitmap_weight() in end_power_clamp() in the powerclamp driver (Yury Norov). - Update the OS policy capabilities handshake in the int340x thermal driver (Srinivas Pandruvada). - Increase the policies bitmap size in int340x (Srinivas Pandruvada). - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the int340x thermal driver (Rafael Wysocki). - Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang). - Add Intel Dynamic Power and Thermal Framework (DPTF) kernel interface documentation (Srinivas Pandruvada). - Fix bullet list warning in the thermal documentation (Randy Dunlap)" * tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits) thermal: int340x: Update OS policy capability handshake thermal: int340x: Increase bitmap size Documentation: thermal: DPTF Documentation MAINTAINERS: thermal: samsung: update Krzysztof Kozlowski's email thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp() thermal/drivers/brcmstb_thermal: Interrupt is optional thermal: tegra-bpmp: Handle errors in BPMP response drivers/thermal/ti-soc-thermal: Add hwmon support dt-bindings: thermal: tsens: Add msm8953 compatible dt-bindings: thermal: Add sm8150 compatible string for LMh thermal/drivers/qcom/lmh: Add support for sm8150 thermal/drivers/tsens: register thermal zones as hwmon sensors MAINTAINERS: thermal: samsung: Drop obsolete properties dt-bindings: thermal: samsung: Convert to dtschema tools/power/x86/intel-speed-select: v1.12 release tools/power/x86/intel-speed-select: HFI support tools/power/x86/intel-speed-select: OOB daemon mode thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub thermal: Replace acpi_bus_get_device() ... |
||
|
02b82b02c3 |
Power management updates for 5.18-rc1
- Allow device_pm_check_callbacks() to be called from interrupt context without issues (Dmitry Baryshkov). - Modify devm_pm_runtime_enable() to automatically handle pm_runtime_dont_use_autosuspend() at driver exit time (Douglas Anderson). - Make the schedutil cpufreq governor use to_gov_attr_set() instead of open coding it (Kevin Hao). - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the cpufreq longhaul driver (Rafael Wysocki). - Unify show() and store() naming in cpufreq and make it use __ATTR_XX (Lianjie Zhang). - Make the intel_pstate driver use the EPP value set by the firmware by default (Srinivas Pandruvada). - Re-order the init checks in the powernow-k8 cpufreq driver (Mario Limonciello). - Make the ACPI processor idle driver check for architectural support for LPI to avoid using it on x86 by mistake (Mario Limonciello). - Add Sapphire Rapids Xeon support to the intel_idle driver (Artem Bityutskiy). - Add 'preferred_cstates' module argument to the intel_idle driver to work around C1 and C1E handling issue on Sapphire Rapids (Artem Bityutskiy). - Add core C6 optimization on Sapphire Rapids to the intel_idle driver (Artem Bityutskiy). - Optimize the haltpoll cpuidle driver a bit (Li RongQing). - Remove leftover text from intel_idle() kerneldoc comment and fix up white space in intel_idle (Rafael Wysocki). - Fix load_image_and_restore() error path (Ye Bin). - Fix typos in comments in the system wakeup hadling code (Tom Rix). - Clean up non-kernel-doc comments in hibernation code (Jiapeng Chong). - Fix __setup handler error handling in system-wide suspend and hibernation core code (Randy Dunlap). - Add device name to suspend_report_result() (Youngjin Jang). - Make virtual guests honour ACPI S4 hardware signature by default (David Woodhouse). - Block power off of a parent PM domain unless child is in deepest state (Ulf Hansson). - Use dev_err_probe() to simplify error handling for generic PM domains (Ahmad Fatoum). - Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo). - Document Intel uncore frequency scaling (Srinivas Pandruvada). - Add DTPM hierarchy description (Daniel Lezcano). - Change the locking scheme in DTPM (Daniel Lezcano). - Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer release (Daniel Lezcano). - Make dtpm_node_callback[] static (kernel test robot). - Fix spelling mistake "initialze" -> "initialize" in dtpm_create_hierarchy() (Colin Ian King). - Add tracer tool for the amd-pstate driver (Jinzhou Su). - Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy). - Add AMD P-State support to the cpupower utility (Huang Rui). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmI4pM4SHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxh5wQAJEz3u55wIHzeov30obtXaD3SxxnvRzR p96gRcmNoR2so/Q9D+h+JHZKQkVklbnbqExMXQn1qarceAUN7KPjVMRvagjZsC/f J3LtQmx96yqGTCzOTu5n+Ol2ojKLMCMo++no/2873BYhd60TV6oQxRzkNiZx215n tT6MKY5ZMX448VKWAWh9vt5rdvbBj9z6cfvpchK/3bziE21lfLz/1iXeFnwqjPGU XuA7NYbVAHOfsdHZk19+4qAgm8EYkmjd4/J8HDlb7XouyLuUGy8KJZYhSrJKiQ1C f9f2Zw0925/YpBmFXOwxuYWP9KjFKlq7Cdr3SSgVGDOvgyRtpeV4fU8Y6WPFCtEV fQdKr9/4KQP6hwUpxJZucSf49wcnyh7hFDMxrwVVcL96yXZef1OqG3ITihJY/n4J +wDnpR2VqBeiG5NyECjk3mPROZGFfUlHRsqMd3JOswMpGF5phpEI9nNFcayB262S Rkgcb3MacFVsuo/ZBdzCUTZ6ECvjxZn4FGZPxumkp65SJO18gOPbqs8qfGCZ3Tgb GDy0CWEOv/KuGnks1CkBGok2Z4q8s2GcZmaOp9BiPjxKJD71i4uPtiGA/5Ahb6cm Cu0G7Ub/t2Vc93E7mnTE4hh2IuiAN73yB5teM4YNllHw6f+aqVGlvJktIMpShajo eEBNFlkwljyz =WlR9 -----END PGP SIGNATURE----- Merge tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These are mostly fixes and cleanups all over the code and a new piece of documentation for Intel uncore frequency scaling. Functionality-wise, the intel_idle driver will support Sapphire Rapids Xeons natively now (with some extra facilities for controlling C-states more precisely on those systems), virtual guests will take the ACPI S4 hardware signature into account by default, the intel_pstate driver will take the defualt EPP value from the firmware, cpupower utility will support the AMD P-state driver added in the previous cycle, and there is a new tracer utility for that driver. Specifics: - Allow device_pm_check_callbacks() to be called from interrupt context without issues (Dmitry Baryshkov). - Modify devm_pm_runtime_enable() to automatically handle pm_runtime_dont_use_autosuspend() at driver exit time (Douglas Anderson). - Make the schedutil cpufreq governor use to_gov_attr_set() instead of open coding it (Kevin Hao). - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the cpufreq longhaul driver (Rafael Wysocki). - Unify show() and store() naming in cpufreq and make it use __ATTR_XX (Lianjie Zhang). - Make the intel_pstate driver use the EPP value set by the firmware by default (Srinivas Pandruvada). - Re-order the init checks in the powernow-k8 cpufreq driver (Mario Limonciello). - Make the ACPI processor idle driver check for architectural support for LPI to avoid using it on x86 by mistake (Mario Limonciello). - Add Sapphire Rapids Xeon support to the intel_idle driver (Artem Bityutskiy). - Add 'preferred_cstates' module argument to the intel_idle driver to work around C1 and C1E handling issue on Sapphire Rapids (Artem Bityutskiy). - Add core C6 optimization on Sapphire Rapids to the intel_idle driver (Artem Bityutskiy). - Optimize the haltpoll cpuidle driver a bit (Li RongQing). - Remove leftover text from intel_idle() kerneldoc comment and fix up white space in intel_idle (Rafael Wysocki). - Fix load_image_and_restore() error path (Ye Bin). - Fix typos in comments in the system wakeup hadling code (Tom Rix). - Clean up non-kernel-doc comments in hibernation code (Jiapeng Chong). - Fix __setup handler error handling in system-wide suspend and hibernation core code (Randy Dunlap). - Add device name to suspend_report_result() (Youngjin Jang). - Make virtual guests honour ACPI S4 hardware signature by default (David Woodhouse). - Block power off of a parent PM domain unless child is in deepest state (Ulf Hansson). - Use dev_err_probe() to simplify error handling for generic PM domains (Ahmad Fatoum). - Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo). - Document Intel uncore frequency scaling (Srinivas Pandruvada). - Add DTPM hierarchy description (Daniel Lezcano). - Change the locking scheme in DTPM (Daniel Lezcano). - Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer release (Daniel Lezcano). - Make dtpm_node_callback[] static (kernel test robot). - Fix spelling mistake "initialze" -> "initialize" in dtpm_create_hierarchy() (Colin Ian King). - Add tracer tool for the amd-pstate driver (Jinzhou Su). - Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy). - Add AMD P-State support to the cpupower utility (Huang Rui)" * tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits) cpufreq: powernow-k8: Re-order the init checks cpuidle: intel_idle: Drop redundant backslash at line end cpuidle: intel_idle: Update intel_idle() kerneldoc comment PM: hibernate: Honour ACPI hardware signature by default for virtual guests cpufreq: intel_pstate: Use firmware default EPP cpufreq: unify show() and store() naming and use __ATTR_XX PM: core: keep irq flags in device_pm_check_callbacks() cpuidle: haltpoll: Call cpuidle_poll_state_init() later Documentation: amd-pstate: add tracer tool introduction tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state tools/power/x86/intel_pstate_tracer: make tracer as a module cpufreq: amd-pstate: Add more tracepoint for AMD P-State module PM: sleep: Add device name to suspend_report_result() turbostat: fix PC6 displaying on some systems intel_idle: add core C6 optimization for SPR intel_idle: add 'preferred_cstates' module argument intel_idle: add SPR support PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend() ACPI: processor idle: Check for architectural support for LPI cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function ... |
||
|
d2eb5500f1 |
LKMM pull request for v5.18
This series contains an improved explanation of syntactic and semantic dependencies from Alan Stern. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmIurqQTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jGQnD/0eB7REmhm/nxzSttC6/l0aQMWoijRu uNFaeK7y+UmfjcVfS0VflUFwzmEOduLHUHeUOpXT7GoEEuoVi/4tN5YEgdarDCwn TPsMAizAvbrj3TymbXF1z+DC2QiWWeufVTcv4dSSKJviC839Zaauh4QZmoys7yGM BSuUX+dOHax6XGoXtolIqGwplH71RFkFM1dJy4BSSdmhVsTPuFLkxhoBVI9X4LgO tmRNAwV2J2mig8+HuMhtl+dYaugUTHAjZ+GqqFz7BhmH5isXuVPGK1iankEuiOhs rzvKNKrA0YW903a3bPj3g0DclbYYAFygOjBu49Jl6Y+BeHoID2eNbt9/+n+DWAtt D/uKJNFUfdVsDbBQ61P52rB0Bhz3dl3wTR4f6Nn7+MBNJAzLrhTVa73EZAzI1nuO GDReAzr6eb0xRB+WibFLK4iXVhRYw406YW9VPp/Ikl1DLl8vnPZlrQR3rEjTGhi7 lyLRRCXKBb8Aaja1rdHFG4CDb3j+BXW44YscC0wrAFzK9MQFOeHbLupruf4TxsXL X1KEFDqPVWPSCjTt9NbA1AofWNGIQFmjU3PNB7xLMLIlOBHRoI/ia4RUotA0cWz/ f5uFFKbFFeW+ZKDJtKyMBpNJpnnBrOqo1TrXBxIICM3DrYxFfiGDqrByebn7TupA GWRa5nAQjXIoBQ== =bGU7 -----END PGP SIGNATURE----- Merge tag 'lkmm.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull memory model doc update from Paul McKenney: "An improved explanation of syntactic and semantic dependencies from Alan Stern" * tag 'lkmm.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: tools/memory-model: Explain syntactic and semantic dependencies |
||
|
35dc0352bb |
RCU pull request for v5.18
This pull request contains the following branches: exp.2022.02.24a: Contains a fix for idle detection from Neeraj Upadhyay and missing access marking detected by KCSAN. fixes.2022.02.14a: Miscellaneous fixes. rcu_barrier.2022.02.08a: Reduces coupling between rcu_barrier() and CPU-hotplug operations, so that rcu_barrier() no longer needs to do cpus_read_lock(). This may also someday allow system boot to bring CPUs online concurrently. rcu-tasks.2022.02.08a: Enable more aggressive movement to per-CPU queueing when reacting to excessive lock contention due to workloads placing heavy update-side stress on RCU tasks. rt.2022.02.01b: Improvements to RCU priority boosting, including changes from Neeraj Upadhyay, Zqiang, and Alison Chaiken. torture.2022.02.01b: Various fixes improving test robustness and debug information. torturescript.2022.02.08a: Add tests for SRCU size transitions, further compress torture.sh build products, and improve debug output. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmIusb0THHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jAklD/9VXLK7crcg2YeRXUIg1IOdnancsVCV MNtTfxNYqYIis+W2UfuHKuQu2yEXF5fihdY0J9TQv0byHsprp6FIZT+i1An4Ukgd 0vyHjd/DaIKgs2txsB1DjhlatWlJUfQuBwhtNUkpYFLFwKdCI1l813bPbNlL+GiL p0ZejVMpBC5HgE6sDOtaaQSAB+AEUp+Lgr+yaG/On8hfzwWFKO8KldxhiKY9n07v SNDfKDgXB+80hx4RBVGbkuogV3s9brFULoNRXJy7Uf79DtiY09uazhhA3G0TjO34 zGwmF91dqsXDF/Uz8g4aZO0xYRXUchOrsQ5lgO/GhTVbM9I0wWlMHEk/8WHyBJkU vlXOMuwzBc9/5uwZE3rnkA4a3nkXhPQjLlCr+/I7A/7Vsv9IBW9WSlgMvUN0Qf4S XAwTnIqfErnR60a+L0+HRr5kIV5VoXcxqI/Nv0/4/BMLRubS/c7cYjOTxXNJL9SU 50pv5vty9xk3HSpuz0JAOyLf+PUT773uUQhFr5xCBSCVqbAm5WFg6hWPAgrN/tUS wstBc0wlA73rKVJxeLDQwHc/oT1zTUEzswVZITQ5zLHK0t0GbeR6QHccsdeaJyTe DisX+66A6YQrEuJmx5xUZqjYHqtYLDOBTbHA3ZwQmvjKu8ibWZ8Fg9ioURLCS4bF +FVkp/5KdcAN9w== =ljVY -----END PGP SIGNATURE----- Merge tag 'rcu.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Fix idle detection (Neeraj Upadhyay) and missing access marking detected by KCSAN. - Reduce coupling between rcu_barrier() and CPU-hotplug operations, so that rcu_barrier() no longer needs to do cpus_read_lock(). This may also someday allow system boot to bring CPUs online concurrently. - Enable more aggressive movement to per-CPU queueing when reacting to excessive lock contention due to workloads placing heavy update-side stress on RCU tasks. - Improvements to RCU priority boosting, including changes from Neeraj Upadhyay, Zqiang, and Alison Chaiken. - Various fixes improving test robustness and debug information. - Add tests for SRCU size transitions, further compress torture.sh build products, and improve debug output. - Miscellaneous fixes. * tag 'rcu.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits) rcu: Replace cpumask_weight with cpumask_empty where appropriate rcu: Remove __read_mostly annotations from rcu_scheduler_active externs rcu: Uninline multi-use function: finish_rcuwait() rcu: Mark writes to the rcu_segcblist structure's ->flags field kasan: Record work creation stack trace with interrupts enabled rcu: Inline __call_rcu() into call_rcu() rcu: Add mutex for rcu boost kthread spawning and affinity setting rcu: Fix description of kvfree_rcu() MAINTAINERS: Add Frederic and Neeraj to their RCU files rcutorture: Provide non-power-of-two Tasks RCU scenarios rcutorture: Test SRCU size transitions torture: Make torture.sh help message match reality rcu-tasks: Set ->percpu_enqueue_shift to zero upon contention rcu-tasks: Use order_base_2() instead of ilog2() rcu: Create and use an rcu_rdp_cpu_online() rcu: Make rcu_barrier() no longer block CPU-hotplug operations rcu: Rework rcu_barrier() and callback-migration logic rcu: Refactor rcu_barrier() empty-list handling rcu: Kill rnp->ofl_seq and use only rcu_state.ofl_lock for exclusion torture: Change KVM environment variable to RCUTORTURE ... |
||
|
3fd33273a4 |
Reenable ENQCMD/PASID support:
- Simplify the PASID handling to allocate the PASID once, associate it to the mm of a process and free it on mm_exit(). The previous attempt of refcounted PASIDs and dynamic alloc()/free() turned out to be error prone and too complex. The PASID space is 20bits, so the case of resource exhaustion is a pure academic concern. - Populate the PASID MSR on demand via #GP to avoid racy updates via IPIs. - Reenable ENQCMD and let objtool check for the forbidden usage of ENQCMD in the kernel. - Update the documentation for Shared Virtual Addressing accordingly. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmI4WpETHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoUfnD/0bY94rgEX4Uuy/mFQ1W8X8XlcyKrha 0/cRATb+4QV/pwJgGr2nClKhGlFMYPdJLvKMC1TCUPCVrLD1RNmluIZoFzeqXwhm jDdCcFOuGZ2D4ujDPWwOOpKBT1ytovnQa7+lH6QJyKkEqdcC2ncOvGJQoiRxRQIG 8wTVs/OUvQJ5ZhSZQMKQN4uMWMyHEjhbroYS30/uNi/598jTPgzlEoa14XocQ9Os nS6ALvjuc9MsJ34F61etMaJU1ZMI3Wx75u9QjEvX6hmJs87YdvgwE7lzJUKFDEuh gewM0wp2fTa8/azzP0eMiHTin56PqFdmllzRqXmilbZMEPOeI29dZVArCdpKcAn0 r9p1kJUT3Xl2G3Oir/OdCaaQHcznD1Y5ZFOyh12wgEucZ/rdeSr7nq7n5HoOL5Bw Q2o6YvTkE9DOL0nTN1lSXGiPspou7fzX0uUcRBrbJUS3sBv4zGIlaJXUaTVnSdAt VZj4LeOK7v2BjyeiOY0iaaIQd3xjmLUF0UjozXS5M13SoVcToZRbyWqhDzPvNuKA imQb/dnFpXhABgmuqAiJLeqM0VtGMFNc780OURkcsBSPng+iSEdV4DzuhK0jpU8x Uk1RuGMd/vgmrlDFBrw+orQQiiKR1ixpI0LiHfcOBycfJhqTwcnrNZvAN5/do28Z E23+QzlUbZF0cw== =Dy8V -----END PGP SIGNATURE----- Merge tag 'x86-pasid-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PASID support from Thomas Gleixner: "Reenable ENQCMD/PASID support: - Simplify the PASID handling to allocate the PASID once, associate it to the mm of a process and free it on mm_exit(). The previous attempt of refcounted PASIDs and dynamic alloc()/free() turned out to be error prone and too complex. The PASID space is 20bits, so the case of resource exhaustion is a pure academic concern. - Populate the PASID MSR on demand via #GP to avoid racy updates via IPIs. - Reenable ENQCMD and let objtool check for the forbidden usage of ENQCMD in the kernel. - Update the documentation for Shared Virtual Addressing accordingly" * tag 'x86-pasid-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/x86: Update documentation for SVA (Shared Virtual Addressing) tools/objtool: Check for use of the ENQCMD instruction in the kernel x86/cpufeatures: Re-enable ENQCMD x86/traps: Demand-populate PASID MSR via #GP sched: Define and initialize a flag to identify valid PASID in the task x86/fpu: Clear PASID when copying fpstate iommu/sva: Assign a PASID to mm on PASID allocation and free it on mm exit kernel/fork: Initialize mm's PASID iommu/ioasid: Introduce a helper to check for valid PASIDs mm: Change CONFIG option for mm->pasid field iommu/sva: Rename CONFIG_IOMMU_SVA_LIB to CONFIG_IOMMU_SVA |
||
|
61e2658e37 |
- A couple of fixes and improvements to the SGX selftests
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmI4WVQACgkQEsHwGGHe VUpL6w//RpMzMnbo0j45xJfEwrw/zw0nB4d7/j185wqqxbvLwZZe1Xb4RfLJ28Bn iW4mQG15H0tiR3EeOnR5QwIqEOYcWb1IkYtTQFk//bzyto2jb19S+/zDKvj0M9zM apA1s+faKjyvcGdRUmZR6YqnFCpfGCaB060AYV2hVoAb9NqktUl4gbRNjJh9Fl2M PAPBK7VhVD4ycq1FnOw3zCky5uGCWOigxz4FeOelcT39ETdLXL9TgHO6aHiapco9 rNbCI5L47dpjVSSZlmCJHaEgeaU9jyOiEzbQh4VPR88eDggLhkvQwA4POF+q4xHs uVv9pCRUWEs0BDBc3itDsVTpmv8V9OIXiJhVEbkSM2ZHmlZfkZT1MiH6HChi7pNO tyFHKEiutUAqCrS9fMrqxDM1vXeH/wPRGhN/wtBY7UzcDbLRAHLW5fk2HinVTTx2 hcdrz2ku16J/ioxP2BmtdAIdYZqusReSoAPI5Z1UpyUNtKvNEXUj8a0y/w9SYTV4 M7KakbZAQnh56HyV0j5GlM5xRvOpmJQVZQJrOi4h4xm97mO1eGfL4E9boBKFi/PF lTSkbNs9kHSqgFjjKNC0+a28jGa8BrVfRbD39zcUoUYWo68wDVIq6gB1RxQG0l8J QYxXQekHvRZ/NINbcpY6okE9L9X1CPPaHfs2+7VRsxjjHWUcIYU= =uGS4 -----END PGP SIGNATURE----- Merge tag 'x86_sgx_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SGX updates from Borislav Petkov: - A couple of fixes and improvements to the SGX selftests * tag 'x86_sgx_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/sgx: Treat CC as one argument selftests/x86: Add validity check and allow field splitting selftests/sgx: Remove extra newlines in test output selftests/sgx: Ensure enclave data available during debug print selftests/sgx: Do not attempt enclave build without valid enclave selftests/sgx: Fix NULL-pointer-dereference upon early test failure |
||
|
2268735045 |
- Add support for a couple new insn sets to the insn decoder: AVX512-FP16,
AMX, other misc insns. - Update VMware-specific MAINTAINERS entries -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmI4URIACgkQEsHwGGHe VUob3A/9GFyqt9bBKrSaq9Rt1UVkq6dQhG3kO7dW5d0YDvy8JmR9is4rNDV9GGx6 A1OAue/gDlZFIz/829oS1qwjB7GZ4Rfb0gRo33bytDLLmd0BRXW7ioZ54jBRnWvy 8dZ2WruMmazK6uJxoHvtOA+Pt3ukb074CZZ1SfW344clWK6FJZeptyRclWaT1Py2 QOIJOxMraCdNAay/1ZvOdIqqdIPx5+JyzbHIYOWUFzwT4y+Q8kFNbigrJnqxe5Ij aqRjzMIvt6MeLwbq9CfLsPFA3gaSzYeOkuXQPcqRgd5LU5ZyXBLStUrGEv1fsMvd 9Kh7VFycZPS7MKzxoEcbuJTTOR4cBsINOlbo9iWr7UD5pm5h7c3vc+nCyia+U+Xo 5XRpf8nitt4a3r1f6HxwXJS0OlBkS4CqexE2OejY4yhWRlxhMcIvRyquU+Z0J4Bp mgDJuXSzfJfFcBzp4jjOBxGPNEjXXOdy/qc/1jR97eMmTKrk3gk/74NWUx9hw4oN 5RGeC+khAD13TL0yVQfKBe5HuLK5tHppAzXAnT2xi6qUn+VJjLxNWgg3iV9tbShM 4q5vJp3BmvNOY8HQv1R3IDFfN0IAL09Q9v6EzEroNuVUhEOzBdH7JSzWkvBBveZb FVgD3I+wNBE1nQD3cP/6DGbRe1JG3ULDF95WJshB8gNJwavlZGs= =f7VZ -----END PGP SIGNATURE----- Merge tag 'x86_misc_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 updates from Borislav Petkov: - Add support for a couple new insn sets to the insn decoder: AVX512-FP16, AMX, other misc insns. - Update VMware-specific MAINTAINERS entries * tag 'x86_misc_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Mark VMware mailing list entries as email aliases MAINTAINERS: Add Zack as maintainer of vmmouse driver MAINTAINERS: Update maintainers for paravirt ops and VMware hypervisor interface x86/insn: Add AVX512-FP16 instructions to the x86 instruction decoder perf/tests: Add AVX512-FP16 instructions to x86 instruction decoder test x86/insn: Add misc instructions to x86 instruction decoder perf/tests: Add misc instructions to the x86 instruction decoder test x86/insn: Add AMX instructions to the x86 instruction decoder perf/tests: Add AMX instructions to x86 instruction decoder test |
||
|
356a1adca8 |
arm64 updates for 5.18
- Support for including MTE tags in ELF coredumps - Instruction encoder updates, including fixes to 64-bit immediate generation and support for the LSE atomic instructions - Improvements to kselftests for MTE and fpsimd - Symbol aliasing and linker script cleanups - Reduce instruction cache maintenance performed for user mappings created using contiguous PTEs - Support for the new "asymmetric" MTE mode, where stores are checked asynchronously but loads are checked synchronously - Support for the latest pointer authentication algorithm ("QARMA3") - Support for the DDR PMU present in the Marvell CN10K platform - Support for the CPU PMU present in the Apple M1 platform - Use the RNDR instruction for arch_get_random_{int,long}() - Update our copy of the Arm optimised string routines for str{n}cmp() - Fix signal frame generation for CPUs which have foolishly elected to avoid building in support for the fpsimd instructions - Workaround for Marvell GICv3 erratum #38545 - Clarification to our Documentation (booting reqs. and MTE prctl()) - Miscellanous cleanups and minor fixes -----BEGIN PGP SIGNATURE----- iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmIvta8QHHdpbGxAa2Vy bmVsLm9yZwAKCRC3rHDchMFjNAIhB/oDSva5FryAFExVuIB+mqRkbZO9kj6fy/5J ctN9LEVO2GI/U1TVAUWop1lXmP8Kbq5UCZOAuY8sz7dAZs7NRUWkwTrXVhaTpi6L oxCfu5Afu76d/TGgivNz+G7/ewIJRFj5zCPmHezLF9iiWPUkcAsP0XCp4a0iOjU4 04O4d7TL/ap9ujEes+U0oEXHnyDTPrVB2OVE316FKD1fgztcjVJ2U+TxX5O4xitT PPIfeQCjQBq1B2OC1cptE3wpP+YEr9OZJbx+Ieweidy1CSInEy0nZ13tLoUnGPGU KPhsvO9daUCbhbd5IDRBuXmTi/sHU4NIB8LNEVzT1mUPnU8pCizv =ziGg -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - Support for including MTE tags in ELF coredumps - Instruction encoder updates, including fixes to 64-bit immediate generation and support for the LSE atomic instructions - Improvements to kselftests for MTE and fpsimd - Symbol aliasing and linker script cleanups - Reduce instruction cache maintenance performed for user mappings created using contiguous PTEs - Support for the new "asymmetric" MTE mode, where stores are checked asynchronously but loads are checked synchronously - Support for the latest pointer authentication algorithm ("QARMA3") - Support for the DDR PMU present in the Marvell CN10K platform - Support for the CPU PMU present in the Apple M1 platform - Use the RNDR instruction for arch_get_random_{int,long}() - Update our copy of the Arm optimised string routines for str{n}cmp() - Fix signal frame generation for CPUs which have foolishly elected to avoid building in support for the fpsimd instructions - Workaround for Marvell GICv3 erratum #38545 - Clarification to our Documentation (booting reqs. and MTE prctl()) - Miscellanous cleanups and minor fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits) docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred arm64/mte: Remove asymmetric mode from the prctl() interface arm64: Add cavium_erratum_23154_cpus missing sentinel perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition Documentation: vmcoreinfo: Fix htmldocs warning kasan: fix a missing header include of static_keys.h drivers/perf: Add Apple icestorm/firestorm CPU PMU driver drivers/perf: arm_pmu: Handle 47 bit counters arm64: perf: Consistently make all event numbers as 16-bits arm64: perf: Expose some Armv9 common events under sysfs perf/marvell: cn10k DDR perf event core ownership perf/marvell: cn10k DDR perfmon event overflow handling perf/marvell: CN10k DDR performance monitor support dt-bindings: perf: marvell: cn10k ddr performance monitor arm64: clean up tools Makefile perf/arm-cmn: Update watchpoint format perf/arm-cmn: Hide XP PUB events for CMN-600 arm64: drop unused includes of <linux/personality.h> arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones ... |
||
|
9d8e7007dc |
tpmdd updates for Linux v5.18
-----BEGIN PGP SIGNATURE----- iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYi62bxIcamFya2tvQGtl cm5lbC5vcmcACgkQGnq6IXRrq9KcoQD/dmnK80r9aYRpjP0r9lRViKBbpPxJVHR1 XNDmRVET7DkBANz1Y00wayKWskefS1rGHXDp40BNBiideWz1GFrWg/ED =u9w6 -----END PGP SIGNATURE----- Merge tag 'tpmdd-next-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm updates from Jarkko Sakkinen: "In order to split the work a bit we've aligned with David Howells more or less that I take more hardware/firmware aligned keyring patches, and he takes care more of the framework aligned patches. For TPM the patches worth of highlighting are the fixes for refcounting provided by Lino Sanfilippo and James Bottomley. Eric B. has done a bunch obvious (but important) fixes but there's one a bit controversial: removal of asym_tpm. It was added in 2018 when TPM1 was already declared as insecure and world had moved on to TPM2. I don't know how this has passed all the filters but I did not have a chance to see the patches when they were out. I simply cannot commit to maintaining this because it was from all angles just wrong to take it in the first place to the mainline kernel. Nobody should use this module really for anything. Finally, there is a new keyring '.machine' to hold MOK keys ('Machine Owner Keys'). In the mok side MokListTrustedRT UEFI variable can be set, from which kernel knows that MOK keys are kernel trusted keys and they are populated to the machine keyring. This keyring linked to the secondary trusted keyring, which means that can be used like any kernel trusted keys. This keyring of course can be used to hold other MOK'ish keys in other platforms in future" * tag 'tpmdd-next-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: (24 commits) tpm: use try_get_ops() in tpm-space.c KEYS: asymmetric: properly validate hash_algo and encoding KEYS: asymmetric: enforce that sig algo matches key algo KEYS: remove support for asym_tpm keys tpm: fix reference counting for struct tpm_chip integrity: Only use machine keyring when uefi_check_trust_mok_keys is true integrity: Trust MOK keys if MokListTrustedRT found efi/mokvar: move up init order KEYS: Introduce link restriction for machine keys KEYS: store reference to machine keyring integrity: add new keyring handler for mok keys integrity: Introduce a Linux keyring called machine integrity: Fix warning about missing prototypes KEYS: trusted: Avoid calling null function trusted_key_exit KEYS: trusted: Fix trusted key backends when building as module tpm: xen-tpmfront: Use struct_size() helper KEYS: x509: remove dead code that set ->unsupported_sig KEYS: x509: remove never-set ->unsupported_key flag KEYS: x509: remove unused fields KEYS: x509: clearly distinguish between key and signature algorithms ... |
||
|
7bd1da15d2 |
perf parse-events: Ignore case in topdown.slots check
An issue with icelakex metrics:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json?h=perf/core&id=65eab2bc7dab326ee892ec5a4c749470b368b51a#n48
That causes the slots not to be first.
Fixes:
|
||
|
8b464eac97 |
perf evlist: Avoid iteration for empty evlist.
As seen with 'perf stat --null ..' and reported in:
https://lore.kernel.org/lkml/YjCLcpcX2peeQVCH@kernel.org/
v2. Avoids setting evsel in the empty list case as suggested by Jiri Olsa.
Committer testing:
Before:
$ perf stat --null sleep 1
Segmentation fault (core dumped)
$
After:
$ perf stat --null sleep 1
Performance counter stats for 'sleep 1':
1.010340646 seconds time elapsed
0.001420000 seconds user
0.000000000 seconds sys
$
Fixes:
|
||
|
3cf6a32f3f |
perf symbols: Fix symbol size calculation condition
Before this patch, the symbol end address fixup to be called, needed two
conditions being met:
if (prev->end == prev->start && prev->end != curr->start)
Where
"prev->end == prev->start" means that prev is zero-long
(and thus needs a fixup)
and
"prev->end != curr->start" means that fixup hasn't been applied yet
However, this logic is incorrect in the following situation:
*curr = {rb_node = {__rb_parent_color = 278218928,
rb_right = 0x0, rb_left = 0x0},
start = 0xc000000000062354,
end = 0xc000000000062354, namelen = 40, type = 2 '\002',
binding = 0 '\000', idle = 0 '\000', ignore = 0 '\000',
inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
name = 0x1159739e "kprobe_optinsn_page\t[__builtin__kprobes]"}
*prev = {rb_node = {__rb_parent_color = 278219041,
rb_right = 0x109548b0, rb_left = 0x109547c0},
start = 0xc000000000062354,
end = 0xc000000000062354, namelen = 12, type = 2 '\002',
binding = 1 '\001', idle = 0 '\000', ignore = 0 '\000',
inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
name = 0x1095486e "optinsn_slot"}
In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.
After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.
Fixes:
|
||
|
31035f3e20 |
Merge branch 'thermal-hfi'
Merge Intel Hardware Feedback Interface (HFI) thermal driver for 5.18-rc1 and update the intel-speed-select utility to support that driver. * thermal-hfi: tools/power/x86/intel-speed-select: v1.12 release tools/power/x86/intel-speed-select: HFI support tools/power/x86/intel-speed-select: OOB daemon mode thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub thermal: intel: hfi: Notify user space for HFI events thermal: netlink: Add a new event to notify CPU capabilities change thermal: intel: hfi: Enable notification interrupt thermal: intel: hfi: Handle CPU hotplug events thermal: intel: hfi: Minimally initialize the Hardware Feedback Interface x86/cpu: Add definitions for the Intel Hardware Feedback Interface x86/Documentation: Describe the Intel Hardware Feedback Interface |
||
|
ec3d8b8365 |
Merge branch 'pm-tools'
Merge power management utilities changes for 5.18-rc1: - Add tracer tool for the amd-pstate driver (Jinzhou Su). - Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy). - Add AMD P-State support to the cpupower utility (Huang Rui). * pm-tools: Documentation: amd-pstate: add tracer tool introduction tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state tools/power/x86/intel_pstate_tracer: make tracer as a module cpufreq: amd-pstate: Add more tracepoint for AMD P-State module turbostat: fix PC6 displaying on some systems cpupower: Add "perf" option to print AMD P-State information cpupower: Add function to print AMD P-State performance capabilities cpupower: Move print_speed function into misc helper cpupower: Enable boost state support for AMD P-State module cpupower: Add AMD P-State sysfs definition and access helper cpupower: Introduce ACPI CPPC library cpupower: Add the function to get the sysfs value from specific table cpupower: Initial AMD P-State capability cpupower: Add the function to check AMD P-State enabled cpupower: Add AMD P-State capability flag tools/power/cpupower/{ToDo => TODO}: Rename the todo file tools: cpupower: fix typo in cpupower-idle-set(1) manpage |
||
|
551acdc3c3 |
Networking fixes for 5.17-final, including fixes from netfilter, ipsec,
and wireless. Current release - regressions: - Revert "netfilter: nat: force port remap to prevent shadowing well-known ports", restore working conntrack on asymmetric paths - Revert "ath10k: drop beacon and probe response which leak from other channel", restore working AP and mesh mode on QCA9984 - eth: intel: fix hang during reboot/shutdown Current release - new code bugs: - netfilter: nf_tables: disable register tracking, it needs more work to cover all corner cases Previous releases - regressions: - ipv6: fix skb_over_panic in __ip6_append_data when (admin-only) extension headers get specified - esp6: fix ESP over TCP/UDP, interpret ipv6_skip_exthdr's return value more selectively - bnx2x: fix driver load failure when FW not present in initrd Previous releases - always broken: - vsock: stop destroying unrelated sockets in nested virtualization - packet: fix slab-out-of-bounds access in packet_recvmsg() Misc: - add Paolo Abeni to networking maintainers! Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmIzZb4ACgkQMUZtbf5S IruPURAAs4A7xW5FdqjEFrvUzLZVIhxyWH10Q3KXN65lSO0PitIyO455y/3OoIWA P6djVeH7bDY7wH/y3Uqctz35wuJaeH44kIHwk3QufStaPeDSC6Z+/O9QU82jIZ+T X8AqoBgf7j/NTpiAcVfS2Bsr+ZJVGC1IgqOy4n+bZZdg+BWElZlxQMhUfwqaptAp rM3wwvzqvWyiVDGbxsQf2OJll3ivFqJuahcs6PaPffIi7xno+uyeEnt7aX/vLHQF qzq59I4glcJ90KTFeUP7PW7pmk6uIEyhXGnHbZpstgpTDL0lHnpszdw3jLg/bgfT Dgvf2JjnLGMUU7ER+y89USG9s0h8MWQSLcalL1WHcwkq5QjEPMFyz+LQZvDBsZO6 G/8V1e+wDsPJ+q0jmbTzvPECm+xeb4Wnh+Qgx0WXcDEU4aAavTutJJmFRklPVhEl dSuZXtYgkiz/VOE+WzR8AMYNNZ/pbmsUhQw2QuOfL+hWKd/f/kRwD0iErwrk0cEX aDHvuyt10lTeh2ALM1hE2QVNu3jf8OyiZnFaP8gRoridDFRPyQVlWSOYW+6nLzUb 7PP0pfn2dECGgscn7SWkEpRf75ZRSUq/obCziwjMrczb9iUDqFOm9Uy9Lf6ZHFyy XcA9mnxUUGUVQtC7ynTtZvu+/A7C/PfMe9H9HdzWwJ+rAEGpdiA= =pStH -----END PGP SIGNATURE----- Merge tag 'net-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, ipsec, and wireless. A few last minute revert / disable and fix patches came down from our sub-trees. We're not waiting for any fixes at this point. Current release - regressions: - Revert "netfilter: nat: force port remap to prevent shadowing well-known ports", restore working conntrack on asymmetric paths - Revert "ath10k: drop beacon and probe response which leak from other channel", restore working AP and mesh mode on QCA9984 - eth: intel: fix hang during reboot/shutdown Current release - new code bugs: - netfilter: nf_tables: disable register tracking, it needs more work to cover all corner cases Previous releases - regressions: - ipv6: fix skb_over_panic in __ip6_append_data when (admin-only) extension headers get specified - esp6: fix ESP over TCP/UDP, interpret ipv6_skip_exthdr's return value more selectively - bnx2x: fix driver load failure when FW not present in initrd Previous releases - always broken: - vsock: stop destroying unrelated sockets in nested virtualization - packet: fix slab-out-of-bounds access in packet_recvmsg() Misc: - add Paolo Abeni to networking maintainers!" * tag 'net-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (26 commits) iavf: Fix hang during reboot/shutdown net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload net: bcmgenet: skip invalid partial checksums bnx2x: fix built-in kernel driver load failure net: phy: mscc: Add MODULE_FIRMWARE macros net: dsa: Add missing of_node_put() in dsa_port_parse_of net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit() Revert "ath10k: drop beacon and probe response which leak from other channel" hv_netvsc: Add check for kvmalloc_array iavf: Fix double free in iavf_reset_task ice: destroy flow director filter mutex after releasing VSIs ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats() Add Paolo Abeni to networking maintainers atm: eni: Add check for dma_map_single net/packet: fix slab-out-of-bounds access in packet_recvmsg() net: mdio: mscc-miim: fix duplicate debugfs entry net: phy: marvell: Fix invalid comparison in the resume and suspend functions esp6: fix check on ipv6_skip_exthdr's return value net: dsa: microchip: add spi_device_id tables netfilter: nf_tables: disable register tracking ... |
||
|
1c4debc443 |
selftests: vm: fix clang build error multiple output files
When building the vm selftests using clang, some errors are seen due to having headers in the compilation command: clang -Wall -I ../../../../usr/include -no-pie gup_test.c ../../../../mm/gup_test.h -lrt -lpthread -o .../tools/testing/selftests/vm/gup_test clang: error: cannot specify -o when generating multiple output files make[1]: *** [../lib.mk:146: .../tools/testing/selftests/vm/gup_test] Error 1 Rework to add the header files to LOCAL_HDRS before including ../lib.mk, since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in file lib.mk. Link: https://lkml.kernel.org/r/20220304000645.1888133-1-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
15d703921f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net coming late in the 5.17-rc process: 1) Revert port remap to mitigate shadowing service ports, this is causing problems in existing setups and this mitigation can be achieved with explicit ruleset, eg. ... tcp sport < 16386 tcp dport >= 32768 masquerade random This patches provided a built-in policy similar to the one described above. 2) Disable register tracking infrastructure in nf_tables. Florian reported two issues: - Existing expressions with no implemented .reduce interface that causes data-store on register should cancel the tracking. - Register clobbering might be possible storing data on registers that are larger than 32-bits. This might lead to generating incorrect ruleset bytecode. These two issues are scheduled to be addressed in the next release cycle. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: disable register tracking Revert "netfilter: conntrack: tag conntracks picked up in local out hook" Revert "netfilter: nat: force port remap to prevent shadowing well-known ports" ==================== Link: https://lore.kernel.org/r/20220312220315.64531-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
563c463595 |
Merge branch 'for-next/linkage' into for-next/core
* for-next/linkage: arm64: module: remove (NOLOAD) from linker script linkage: remove SYM_FUNC_{START,END}_ALIAS() x86: clean up symbol aliasing arm64: clean up symbol aliasing linkage: add SYM_FUNC_ALIAS{,_LOCAL,_WEAK}() |
||
|
91c9923a47 |
perf parse: Fix event parser error for hybrid systems
This bug happened on hybrid systems when both cpu_core and cpu_atom have the same event name such as "UOPS_RETIRED.MS" while their event terms are different, then during perf stat, the event for cpu_atom will parse fail and then no output for cpu_atom. UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/ UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/ It is because event terms in the "head" of parse_events_multi_pmu_add will be changed to event terms for cpu_core after parsing UOPS_RETIRED.MS for cpu_core, then when parsing the same event for cpu_atom, it still uses the event terms for cpu_core, but event terms for cpu_atom are different with cpu_core, the event parses for cpu_atom will fail. This patch fixes it, the event terms should be parsed from the original event. This patch can work for the hybrid systems that have the same event in more than 2 PMUs. It also can work in non-hybrid systems. Before: # perf stat -v -e UOPS_RETIRED.MS -a sleep 1 Using CPUID GenuineIntel-6-97-1 UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/ Control descriptor is not initialized UOPS_RETIRED.MS: |
||
|
073a15c351 |
perf bench: Fix NULL check against wrong variable
We did a NULL check after "epollfdp = calloc(...)", but we checked "epollfd" instead of "epollfdp". Signed-off-by: Weiguo Li <liwg06@foxmail.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/tencent_B5D64530EB9C7DBB8D2C88A0C790F1489D0A@qq.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
a7a72631f6 |
perf parse-events: Fix NULL check against wrong variable
We did a null check after "tmp->symbol = strdup(...)", but we checked "list->symbol" other than "tmp->symbol". Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Weiguo Li <liwg06@foxmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/tencent_DF39269807EC9425E24787E6DB632441A405@qq.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
ec9d50ace3 |
tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:
|
||
|
3ec94eeaff |
tools kvm headers arm64: Update KVM headers from the kernel sources
To pick the changes from:
|
||
|
186d32bbf0 |
Networking fixes for 5.17-rc8/final, including fixes from bluetooth,
and ipsec. Current release - regressions: - Bluetooth: fix unbalanced unlock in set_device_flags() - Bluetooth: fix not processing all entries on cmd_sync_work, make connect with qualcomm and intel adapters reliable - Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0" - xdp: xdp_mem_allocator can be NULL in trace_mem_connect() - eth: ice: fix race condition and deadlock during interface enslave Current release - new code bugs: - tipc: fix incorrect order of state message data sanity check Previous releases - regressions: - esp: fix possible buffer overflow in ESP transformation - dsa: unlock the rtnl_mutex when dsa_master_setup() fails - phy: meson-gxl: fix interrupt handling in forced mode - smsc95xx: ignore -ENODEV errors when device is unplugged Previous releases - always broken: - xfrm: fix tunnel mode fragmentation behavior - esp: fix inter address family tunneling on GSO - tipc: fix null-deref due to race when enabling bearer - sctp: fix kernel-infoleak for SCTP sockets - eth: macb: fix lost RX packet wakeup race in NAPI receive - eth: intel stop disabling VFs due to PF error responses - eth: bcmgenet: don't claim WOL when its not available Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmIqlOsACgkQMUZtbf5S IrtKJBAAjZpYBwwHty6JR7AahLF4LNO+o1KmraqFV7YByS5NRfBRpXV7asvpxJNF 9iJhOWtLMsz/mVq0OXdx/+NpDh9JIHrQzb3GiskeKzBdhHmW4HjuYug1gytqRDMx uZOiQEuJSREu0tCsfcVWTF8wm4OgmPWtyZNZq2kwXsHiKoptB9KFK9pcvD6Utxrg jTpYBS5I9cX0Sj+gG9fZFNeyaxgmKkC5cM4cSLcheGSKHvEbX6MIXfi2Wb1VRBzE Qk/1JbkQf4gQ1BAu9kt8+jgWqW7vSnDn2iYUVw7RSSlj5xIM4f4m71nS9XzejJLb ADry24arlmknMS9Rhpy7n3ogNn/5MtlsZt01z/AAyZDRc1rrsWDqOJugtDRSnSEh yAhAsl/vqOuoovA86IRBTji8JlyfNZXt33K7+1KKDsj1wzSpcB9AKTDps8Ncu9uL elyaU2v4bTdhdqkQnxpcsLlLcV3FzLaWUVLpcla3XVLvzjEnoY+mhR5boW735uj7 f8Ig9Aj4UceJ+sQtXywciknE1+s48/pWqs8b8Y5DXX1P168A1ud5voy4Po6RvqQG B17WvAaq/7DsMKcuofeykFHCKlwO36xdt6l0ExaQuzmV+NgoEBWAmgwsyl9ktFpT I09D2RMPfTqYgdNvYkKGBrMKV87weVvHpMIeJiG1YeiBB3e1Xw8= =WfAR -----END PGP SIGNATURE----- Merge tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, and ipsec. Current release - regressions: - Bluetooth: fix unbalanced unlock in set_device_flags() - Bluetooth: fix not processing all entries on cmd_sync_work, make connect with qualcomm and intel adapters reliable - Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0" - xdp: xdp_mem_allocator can be NULL in trace_mem_connect() - eth: ice: fix race condition and deadlock during interface enslave Current release - new code bugs: - tipc: fix incorrect order of state message data sanity check Previous releases - regressions: - esp: fix possible buffer overflow in ESP transformation - dsa: unlock the rtnl_mutex when dsa_master_setup() fails - phy: meson-gxl: fix interrupt handling in forced mode - smsc95xx: ignore -ENODEV errors when device is unplugged Previous releases - always broken: - xfrm: fix tunnel mode fragmentation behavior - esp: fix inter address family tunneling on GSO - tipc: fix null-deref due to race when enabling bearer - sctp: fix kernel-infoleak for SCTP sockets - eth: macb: fix lost RX packet wakeup race in NAPI receive - eth: intel stop disabling VFs due to PF error responses - eth: bcmgenet: don't claim WOL when its not available" * tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits) xdp: xdp_mem_allocator can be NULL in trace_mem_connect(). ice: Fix race condition during interface enslave net: phy: meson-gxl: improve link-up behavior net: bcmgenet: Don't claim WOL when its not available net: arc_emac: Fix use after free in arc_mdio_probe() sctp: fix kernel-infoleak for SCTP sockets net: phy: correct spelling error of media in documentation net: phy: DP83822: clear MISR2 register to disable interrupts gianfar: ethtool: Fix refcount leak in gfar_get_ts_info selftests: pmtu.sh: Kill nettest processes launched in subshell. selftests: pmtu.sh: Kill tcpdump processes launched by subshell. NFC: port100: fix use-after-free in port100_send_complete net/mlx5e: SHAMPO, reduce TIR indication net/mlx5e: Lag, Only handle events from highest priority multipath entry net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE net/mlx5: Fix a race on command flush flow net/mlx5: Fix size field in bufferx_reg struct ax25: Fix NULL pointer dereference in ax25_kill_by_device net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr net: ethernet: lpc_eth: Handle error for clk_enable ... |
||
|
94a4a4fe4c |
selftests: pmtu.sh: Kill nettest processes launched in subshell.
When using "run_cmd <command> &", then "$!" refers to the PID of the
subshell used to run <command>, not the command itself. Therefore
nettest_pids actually doesn't contain the list of the nettest commands
running in the background. So cleanup() can't kill them and the nettest
processes run until completion (fortunately they have a 5s timeout).
Fix this by defining a new command for running processes in the
background, for which "$!" really refers to the PID of the command run.
Also, double quote variables on the modified lines, to avoid shellcheck
warnings.
Fixes:
|
||
|
18dfc66755 |
selftests: pmtu.sh: Kill tcpdump processes launched by subshell.
The cleanup() function takes care of killing processes launched by the
test functions. It relies on variables like ${tcpdump_pids} to get the
relevant PIDs. But tests are run in their own subshell, so updated
*_pids values are invisible to other shells. Therefore cleanup() never
sees any process to kill:
$ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
$ pgrep -af tcpdump
6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
Fix this by running cleanup() in the context of the test subshell.
Now that each test cleans the environment after completion, there's no
need for calling cleanup() again when the next test starts. So let's
drop it from the setup() function. This is okay because cleanup() is
also called when pmtu.sh starts, so even the first test starts in a
clean environment.
Also, use tcpdump's immediate mode. Otherwise it might not have time to
process buffered packets, resulting in missing packets or even empty
pcap files for short tests.
Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can
still inspect the test environment upon failure when using -p.
Fixes:
|
||
|
5e32adccea |
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
Intel P-state tracer is a useful tool to tune and debug Intel P-state driver. AMD P-state tracer import intel pstate tracer. This tool can be used to analyze the performance of AMD P-state tracer. Now CPU frequency, load and desired perf can be traced. Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
ab3ff9f1d7 |
tools/power/x86/intel_pstate_tracer: make tracer as a module
Make intel_pstate_tracer as a module. Other trace event can import this module to analyze their trace data. Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com> Acked-by: Doug Smythies <dsmythies@telus.net> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
a1b6f487cb |
turbostat: fix PC6 displaying on some systems
'MSR_PKG_CST_CONFIG_CONTROL' encodes the deepest allowed package C-state limit, and turbostat decodes it. Before this patch: turbostat does not recognize value "3" on Ice Lake Xeon (ICX) and Sapphire Rapids Xeon (SPR), treats it as "unknown", and does not display any package C-states in the results table. After this patch: turbostat recognizes value 3 on ICX and SPR, treats it as "PC6", and correctly displays package C-states in the results table. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
a82c25c366 |
Revert "netfilter: nat: force port remap to prevent shadowing well-known ports"
This reverts commit
|
||
|
8335adb8f9 |
selftests: tpm: add async space test with noneexisting handle
Add a test for /dev/tpmrm0 in async mode that checks if the code handles invalid handles correctly. Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: <linux-integrity@vger.kernel.org> Cc: <linux-kselftest@vger.kernel.org> Cc: <linux-kernel@vger.kernel.org> Tested-by: Jarkko Sakkinen<jarkko@kernel.org> Signed-off-by: Tadeusz Struk <tstruk@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
0d060f230f |
selftests: tpm2: Determine available PCR bank
Determine an available PCR bank to be used by a test case by querying the capability TPM2_GET_CAP. The TPM2 returns TPML_PCR_SELECTIONS that contains an array of TPMS_PCR_SELECTIONs indicating available PCR banks and the bitmasks that show which PCRs are enabled in each bank. Collect the data in a dictionary. From the dictionary determine the PCR bank that has the PCRs enabled that the test needs. This avoids test failures with TPM2's that either to not have a SHA-1 bank or whose SHA-1 bank is disabled. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
4a01e748a5 |
- Mitigate Spectre v2-type Branch History Buffer attacks on machines
which support eIBRS, i.e., the hardware-assisted speculation restriction after it has been shown that such machines are vulnerable even with the hardware mitigation. - Do not use the default LFENCE-based Spectre v2 mitigation on AMD as it is insufficient to mitigate such attacks. Instead, switch to retpolines on all AMD by default. - Update the docs and add some warnings for the obviously vulnerable cmdline configurations. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmIkktUACgkQEsHwGGHe VUo7ZQ/+O4hzL/tHY0V/ekkDxCrJ3q3Hp+DcxUl2ee5PC3Qgxv1Z1waH6ppK8jQs marAGr7FYbvzY039ON7irxhpSIckBCpx9tM2F43zsPxxY8EdxGojkHbmaqso5HtW l3/O28AcZYoKN/fF8rRAIJy4hrTVascKrNJ2fOiYWYBT62ZIoPm0FusgXbKTZPD+ gT7iUMoyPjBnKdWDT9L6kKOxDF9TivX1Y6JdDHbnnBsgRkeFatkeq9BJ93M73q63 Ziq9c8ZcEXyKez+cGFCfXM7+pNYmfsiL48lilTyf+v+GXahDJQOkFw39j5zXEALm Nk6yB3PRQ74pEwm5WbK7KO8iwPpblmnDB978mfUcpk+9xWJD8pyoUcItAmCBsXh1 LjIImYPqL6YihUb9udh+PEDISsfzWNzr4T+kgW9/yXXG4ZmGy3TLInhTK+rNAxJa EshWZExEZj6yJvt83Vu08W9fppYJq976tJvl8LWOYthaxqY7IQz0q7mYd799yxk0 MLPqvZP1+4pHzqn2c9yeHgrwHwMmoqcyMx6B3EA5maYQPdlT7Fk9RCBeCdIA/ieF OgGxy1WwMH+cvUa5MaBy3Y32LeYU3bUJh0yPFq/7BxEYGG9PJtLhg2xTo1Ui8F1d fKrcSFcjZKVJ9UE5HaqOcp4ka+Q220I9IDGURXkAFQlnOU7X7CE= =Athd -----END PGP SIGNATURE----- Merge tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 spectre fixes from Borislav Petkov: - Mitigate Spectre v2-type Branch History Buffer attacks on machines which support eIBRS, i.e., the hardware-assisted speculation restriction after it has been shown that such machines are vulnerable even with the hardware mitigation. - Do not use the default LFENCE-based Spectre v2 mitigation on AMD as it is insufficient to mitigate such attacks. Instead, switch to retpolines on all AMD by default. - Update the docs and add some warnings for the obviously vulnerable cmdline configurations. * tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation: Warn about eIBRS + LFENCE + Unprivileged eBPF + SMT x86/speculation: Warn about Spectre v2 LFENCE mitigation x86/speculation: Update link to AMD speculation whitepaper x86/speculation: Use generic retpoline by default on AMD x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting Documentation/hw-vuln: Update spectre doc x86/speculation: Add eIBRS + Retpoline options x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE |
||
|
e2dc49ef6c |
kselftest/arm64: Log the PIDs of the parent and child in sve-ptrace
If the test triggers a problem it may well result in a log message from the kernel such as a WARN() or BUG(). If these include a PID it can help with debugging to know if it was the parent or child process that triggered the issue, since the test is just creating a new thread the process name will be the same either way. Print the PIDs of the parent and child on startup so users have this information to hand should it be needed. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20220303192817.2732509-1-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org> |
||
|
06be302970 |
virtio: last minute fixes
Some fixes that took a while to get ready. Not regressions, but they look safe and seem to be worth to have. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmIklk8PHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpacQIAL4f4v+udTETI6oXsbXSrC5ckX6fMMQF6U5y mppXvvImAxcBqe0XcCHglTxW2ZmW9lu6qPD76aH5DcfnwnsoEZ/DoeFzk5YtFqa/ strjqeDY/aFIC0pFShEfGcg1TJ66C0bLPDWTIlWpyL9E0jeiKPeNXtAz2DbIa7cx b6dKAm9DSo48ivU/xGC3sGijoBzp/fbWfnXliyLLVlhv3BnRafggyQVuh4jlT4WJ RDXZ4cSaHXDbDpgeGB5ghBVnFqYKSyxPZqr2QMAO60sCsgaiIjp/KxtscI1DgHIg RxLkEcu+14z7I5H46NRIH3cR75nSp4d4mGgIgMAX0OkZt8fwkNk= =tFhA -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael Tsirkin: "Some last minute fixes that took a while to get ready. Not regressions, but they look safe and seem to be worth to have" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: handle fallout from folio work tools/virtio: fix virtio_test execution vhost: remove avail_event arg from vhost_update_avail_event() virtio: drop default for virtio-mem vdpa: fix use-after-free on vp_vdpa_remove virtio-blk: Remove BUG_ON() in virtio_queue_rq() virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zero vhost: fix hung thread due to erroneous iotlb entries vduse: Fix returning wrong type in vduse_domain_alloc_iova() vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command vdpa/mlx5: should verify CTRL_VQ feature exists for MQ vdpa: factor out vdpa_set_features_unlocked for vdpa internal use virtio_console: break out of buf poll on remove virtio: document virtio_reset_device virtio: acknowledge all features before access virtio: unexport virtio_finalize_features |
||
|
3dd7d135e7 |
tools/virtio: handle fallout from folio work
just add a stub Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
32f1b53fe8 |
tools/virtio: fix virtio_test execution
virtio_test hangs on __vring_new_virtqueue() because `vqs_list_lock` is not initialized. Let's initialize it in vdev_info_init(). Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220118150631.167015-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> |
||
|
b773827e36 |
kselftest/vm: fix tests build with old libc
The error message when I build vm tests on debian10 (GLIBC 2.28): userfaultfd.c: In function `userfaultfd_pagemap_test': userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use in this function); did you mean `MADV_RANDOM'? if (madvise(area_dst, test_pgsize, MADV_PAGEOUT)) ^~~~~~~~~~~~ MADV_RANDOM This patch includes these newer definitions from UAPI linux/mman.h, is useful to fix tests build on systems without these definitions in glibc sys/mman.h. Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.com Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
ff712a627f |
selftests/vm: cleanup hugetlb file after mremap test
The hugepage-mremap test will create a file in a hugetlb filesystem. In a default 'run_vmtests' run, the file will contain all the hugetlb pages. After the test, the file remains and there are no free hugetlb pages for subsequent tests. This causes those hugetlb tests to fail. Change hugepage-mremap to take the name of the hugetlb file as an argument. Unlink the file within the test, and just to be sure remove the file in the run_vmtests script. Link: https://lkml.kernel.org/r/20220201033459.156944-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
b949c21fc2 |
Networking fixes for 5.17-rc7, including fixes from can, xfrm, wifi,
bluetooth, and netfilter. Current release - regressions: - iwlwifi: don't advertise TWT support, prevent FW crash - xfrm: fix the if_id check in changelink - xen/netfront: destroy queues before real_num_tx_queues is zeroed - bluetooth: fix not checking MGMT cmd pending queue, make scanning work again Current release - new code bugs: - mptcp: make SIOCOUTQ accurate for fallback socket - bluetooth: access skb->len after null check - bluetooth: hci_sync: fix not using conn_timeout - smc: fix cleanup when register ULP fails - dsa: restore error path of dsa_tree_change_tag_proto - iwlwifi: fix build error for IWLMEI - iwlwifi: mvm: propagate error from request_ownership to the user Previous releases - regressions: - xfrm: fix pMTU regression when reported pMTU is too small - xfrm: fix TCP MSS calculation when pMTU is close to 1280 - bluetooth: fix bt_skb_sendmmsg not allocating partial chunks - ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks - ipv6: prevent leaks in igmp6 when input queues get full - fix up skbs delta_truesize in UDP GRO frag_list - eth: e1000e: fix possible HW unit hang after an s0ix exit - eth: e1000e: correct NVM checksum verification flow - ptp: ocp: fix large time adjustments Previous releases - always broken: - tcp: make tcp_read_sock() more robust in presence of urgent data - xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate - xfrm: fix xfrm_migrate issues when address family changes - dcb: flush lingering app table entries for unregistered devices - smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error - mac80211: fix EAPoL rekey fail in 802.3 rx path - mac80211: fix forwarded mesh frames AC & queue selection - netfilter: nf_queue: fix socket access races and bugs - batman-adv: fix ToCToU iflink problems and check the result belongs to the expected net namespace - can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting - can: rcar_canfd: register the CAN device when fully ready - eth: igb, igc: phy: drop premature return leaking HW semaphore - eth: ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc(), prevent live lock when link goes down - eth: stmmac: only enable DMA interrupts when ready - eth: sparx5: move vlan checks before any changes are made - eth: iavf: fix races around init, removal, resets and vlan ops - ibmvnic: more reset flow fixes Misc: - eth: fix return value of __setup handlers Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmIhAo4ACgkQMUZtbf5S IrtLdQ/+LstJ6PQpRVa9Pu68Vu0pjwg0FiuBt/C4G//N46uvOvo5ub+Lx0JajZMt m4FBEFji2AXnfvbV/4WIZw+slcEfn2r1oprh0aqS5Ba+s3gQMbcl1C5daXcf7Tte tLFSVsxPBl2AEthps4YFSyMQyczrwVry20uBBgswTkDfyrN4uSLFBKmVQscEsRtQ dxt2AbxazStJM60Q+PI9Zfru3bXGEFgaG07z8RnTTvIJQFpYYsFUMIsee+30GYdc nQRAvrPwFBcSdwzaDf2WLe26MalJ1r7fXe9Mta1IMBFc/e0/8BQWZ6DT8x5n/snc gRJRL37E6V6QCtf80GLR7wR9/NkOxckeva3Z2yt6lOyUkVu4FStFA71iF4g9zH2W GfGw8ejD++suGR+YRqA8ou1vR69to+Q2M8VP+m75sdI0XU61oGquSPOUKyGQJOfx ndCtVW82FaAnQDTs0OBAdliPTCLkTONl0Bezr7htyAiEb8dcNMZESg/szabI+mZS ZKMu+rtw5DFMUsFx0ihAj5vE9mmbnsm/b1Mj+WjziOAD00p/WGu64ot7tMTJtv9B zkVNDbYwg1pFNIeiF/2FRXtsELad6VtUQJL2GQ0vkwas5jXAmymrtjuo5iiHZ9nR Oo9OdwhIFHYWbWTkGMW45uKX3MWTwz5Wne/xGiTpVpke7zhgTso= =TqqZ -----END PGP SIGNATURE----- Merge tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from can, xfrm, wifi, bluetooth, and netfilter. Lots of various size fixes, the length of the tag speaks for itself. Most of the 5.17-relevant stuff comes from xfrm, wifi and bt trees which had been lagging as you pointed out previously. But there's also a larger than we'd like portion of fixes for bugs from previous releases. Three more fixes still under discussion, including and xfrm revert for uAPI error. Current release - regressions: - iwlwifi: don't advertise TWT support, prevent FW crash - xfrm: fix the if_id check in changelink - xen/netfront: destroy queues before real_num_tx_queues is zeroed - bluetooth: fix not checking MGMT cmd pending queue, make scanning work again Current release - new code bugs: - mptcp: make SIOCOUTQ accurate for fallback socket - bluetooth: access skb->len after null check - bluetooth: hci_sync: fix not using conn_timeout - smc: fix cleanup when register ULP fails - dsa: restore error path of dsa_tree_change_tag_proto - iwlwifi: fix build error for IWLMEI - iwlwifi: mvm: propagate error from request_ownership to the user Previous releases - regressions: - xfrm: fix pMTU regression when reported pMTU is too small - xfrm: fix TCP MSS calculation when pMTU is close to 1280 - bluetooth: fix bt_skb_sendmmsg not allocating partial chunks - ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks - ipv6: prevent leaks in igmp6 when input queues get full - fix up skbs delta_truesize in UDP GRO frag_list - eth: e1000e: fix possible HW unit hang after an s0ix exit - eth: e1000e: correct NVM checksum verification flow - ptp: ocp: fix large time adjustments Previous releases - always broken: - tcp: make tcp_read_sock() more robust in presence of urgent data - xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate - xfrm: fix xfrm_migrate issues when address family changes - dcb: flush lingering app table entries for unregistered devices - smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error - mac80211: fix EAPoL rekey fail in 802.3 rx path - mac80211: fix forwarded mesh frames AC & queue selection - netfilter: nf_queue: fix socket access races and bugs - batman-adv: fix ToCToU iflink problems and check the result belongs to the expected net namespace - can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting - can: rcar_canfd: register the CAN device when fully ready - eth: igb, igc: phy: drop premature return leaking HW semaphore - eth: ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc(), prevent live lock when link goes down - eth: stmmac: only enable DMA interrupts when ready - eth: sparx5: move vlan checks before any changes are made - eth: iavf: fix races around init, removal, resets and vlan ops - ibmvnic: more reset flow fixes Misc: - eth: fix return value of __setup handlers" * tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits) ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report() net: dsa: make dsa_tree_change_tag_proto actually unwind the tag proto change ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc() selftests: mlxsw: resource_scale: Fix return value selftests: mlxsw: tc_police_scale: Make test more robust net: dcb: disable softirqs in dcbnl_flush_dev() bnx2: Fix an error message sfc: extend the locking on mcdi->seqno net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe() tcp: make tcp_read_sock() more robust bpf, sockmap: Do not ignore orig_len parameter net: ipa: add an interconnect dependency net: fix up skbs delta_truesize in UDP GRO frag_list iwlwifi: mvm: return value for request_ownership nl80211: Update bss channel on channel switch for P2P_CLIENT iwlwifi: fix build error for IWLMEI ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments batman-adv: Don't expect inter-netns unique iflink indices ... |
||
|
196f9bc050 |
selftests: mlxsw: resource_scale: Fix return value
The test runs several test cases and is supposed to return an error in
case at least one of them failed.
Currently, the check of the return value of each test case is in the
wrong place, which can result in the wrong return value. For example:
# TESTS='tc_police' ./resource_scale.sh
TEST: 'tc_police' [default] 968 [FAIL]
tc police offload count failed
Error: mlxsw_spectrum: Failed to allocate policer index.
We have an error talking to the kernel
Command failed /tmp/tmp.i7Oc5HwmXY:969
TEST: 'tc_police' [default] overflow 969 [ OK ]
...
TEST: 'tc_police' [ipv4_max] overflow 969 [ OK ]
$ echo $?
0
Fix this by moving the check to be done after each test case.
Fixes:
|
||
|
dc97520753 |
selftests: mlxsw: tc_police_scale: Make test more robust
The test adds tc filters and checks how many of them were offloaded by
grepping for 'in_hw'.
iproute2 commit f4cd4f127047 ("tc: add skip_hw and skip_sw to control
action offload") added offload indication to tc actions, producing the
following output:
$ tc filter show dev swp2 ingress
...
filter protocol ipv6 pref 1000 flower chain 0 handle 0x7c0
eth_type ipv6
dst_ip 2001:db8:1::7bf
skip_sw
in_hw in_hw_count 1
action order 1: police 0x7c0 rate 10Mbit burst 100Kb mtu 2Kb action drop overhead 0b
ref 1 bind 1
not_in_hw
used_hw_stats immediate
The current grep expression matches on both 'in_hw' and 'not_in_hw',
resulting in incorrect results.
Fix that by using JSON output instead.
Fixes:
|
||
|
9132c3947b |
selftests/exec: Test for empty string on NULL argv
Test for the NULL argv argument producing a single empty string on exec. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Yang Yingliang <yangyingliang@huawei.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/lkml/20220201011637.2457646-1-keescook@chromium.org |
||
|
4761df52f1 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Use kfree_rcu(ptr, rcu) variant, using kfree_rcu(ptr) was not intentional. From Eric Dumazet. 2) Use-after-free in netfilter hook core, from Eric Dumazet. 3) Missing rcu read lock side for netfilter egress hook, from Florian Westphal. 4) nf_queue assume state->sk is full socket while it might not be. Invoke sock_gen_put(), from Florian Westphal. 5) Add selftest to exercise the reported KASAN splat in 4) 6) Fix possible use-after-free in nf_queue in case sk_refcnt is 0. Also from Florian. 7) Use input interface index only for hardware offload, not for the software plane. This breaks tc ct action. Patch from Paul Blakey. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: net/sched: act_ct: Fix flow table lookup failure with no originating ifindex netfilter: nf_queue: handle socket prefetch netfilter: nf_queue: fix possible use-after-free selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race test netfilter: nf_queue: don't assume sk is full socket netfilter: egress: silence egress hook lockdep splats netfilter: fix use-after-free in __nf_register_net_hook() netfilter: nf_tables: prefer kfree_rcu(ptr, rcu) variant ==================== Link: https://lore.kernel.org/r/20220301215337.378405-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
fb184c4af9 |
The bigger part of the change is a revert for x86 hosts. Here the
second patch was supposed to fix the first, but in reality it was just as broken, so both have to go. x86 host: * Revert incorrect assumption that cr3 changes come with preempt notifier callbacks (they don't when static branches are changed, for example) ARM host: * Correctly synchronise PMR and co on PSCI CPU_SUSPEND * Skip tests that depend on GICv3 when the HW isn't available -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIeGnUUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroMCYgf9GPVUOQUbHVxVqvKB1ABnY3ZIZuS3 +/XLgVifSmXb2sPQmcKIPk7eQkxlzpnVdbznJO5qFMtVKRv/ppj+/ly2wwF8l+rR m1XvyYo2sukK5vTpBrQiRm3aWY7vpx0ds4DStLnrnBuPF/U7x6WlHSL/BqXaNcSJ e+SXd/UFhkg7dEQaU3eqXyf2/mMfR2ZLdUb4v+/UiV7kfzzvRqNERd8HUoVk2FcM VYBr07ChaV4XB/dZsCDVSz2Z7f7rH3sMMW82ZHKjuFUEW4Dij9NiX2ycaeRvkSLG tnliTuROCY2bOQeIVCTHf5XqCAAm7sA1AoClFaUy30+UW9s9j45NuhUQbA== =nuHK -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "The bigger part of the change is a revert for x86 hosts. Here the second patch was supposed to fix the first, but in reality it was just as broken, so both have to go. x86 host: - Revert incorrect assumption that cr3 changes come with preempt notifier callbacks (they don't when static branches are changed, for example) ARM host: - Correctly synchronise PMR and co on PSCI CPU_SUSPEND - Skip tests that depend on GICv3 when the HW isn't available" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3 Revert "KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()" Revert "KVM: VMX: Save HOST_CR3 in vmx_set_host_fs_gs()" KVM: arm64: Don't miss pending interrupts for suspended vCPU |
||
|
4a49db7b0a |
linux-cpupower-5.18-rc1
This cpupower update for Linux 5.18-rc1 adds AMD P-State Support to cpupower tool. AMD P-State kernel support went into 5.17-rc1. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmIdMP8ACgkQCwJExA0N Qxzkvw//SKuYYP5ZBCwgbYPVId1b8diG/Oa8tqhhQkHkcSsgUbUQ8I//iemV7jGB EaKi+nfF403Mh5ZH9dhGd90L3YtdOC8JW32SzOe4VFBU6qjreEyAiIsYjAceNeQB i6CCB3Ggloxm0eXDVsuUl/leBOoMoq3RvfAkxsheSgK1nMIl5xTHqIf1vkQngWK1 vr+YjcXDS7tL7IN8SJ4GxpSJKJfOhPIeiiQvipqaog/eUG4ZDG7O3D0wD8NBk/xx pt+qns5fHNeKaG7rAko+wtpE3MaIox8W91gRWM70Le2G6Z3yCCuvA6jeEdpvljzs 1KfexDpvWlI+DrziuIQsK1FCmjXnP8Rbubdzu5pkr3wq8DOG+RupgnUPOG6vQGxA 6/+Gsz23hMOALDLtt6pCQgrx62kroRdEpQkrri/hv0sdJpRuSqlCl+ngjwts0hC/ iv6iVdIGNXlI7fsoEUQ5ykN2Yemak6uelcngFME2oKYS6zwAN4QqoH/AiMhaQe6Y 649uWMRMTpOGmyCQdVnT+AD9IYAO+HBwRjlJZu6/Jts4bHI9CAhh5ROZr9TxsSoT mSHHvzWQvw3bnRVSb5mrw4t+9Lcvku++n/oVYPs5de/Qt16r6Rp7h4D2orQ70h/M FFVAwqiBR5CwsI81ojq+IZ13Msdp+D8w2xBa1PyaI7kDGYlaAq4= =PP0E -----END PGP SIGNATURE----- Merge tag 'linux-cpupower-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux Pull cpupower utility updates for 5.18-rc1 from Shuah Khan: "This cpupower update for Linux 5.18-rc1 adds AMD P-State Support to cpupower tool. AMD P-State kernel support went into 5.17-rc1." * tag 'linux-cpupower-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: cpupower: Add "perf" option to print AMD P-State information cpupower: Add function to print AMD P-State performance capabilities cpupower: Move print_speed function into misc helper cpupower: Enable boost state support for AMD P-State module cpupower: Add AMD P-State sysfs definition and access helper cpupower: Introduce ACPI CPPC library cpupower: Add the function to get the sysfs value from specific table cpupower: Initial AMD P-State capability cpupower: Add the function to check AMD P-State enabled cpupower: Add AMD P-State capability flag |
||
|
cedd3614e5 |
perf: Add irq and exception return branch types
This expands generic branch type classification by adding two more entries there in i.e irq and exception return. Also updates the x86 implementation to process X86_BR_IRET and X86_BR_IRQ records as appropriate. This changes branch types reported to user space on x86 platform but it should not be a problem. The possible scenarios and impacts are enumerated here. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1645681014-3346-1-git-send-email-anshuman.khandual@arm.com |
||
|
2e78855d31 |
selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race test
causes: BUG: KASAN: slab-out-of-bounds in sk_free+0x25/0x80 Write of size 4 at addr ffff888106df0284 by task nf-queue/1459 sk_free+0x25/0x80 nf_queue_entry_release_refs+0x143/0x1a0 nf_reinject+0x233/0x770 ... without 'netfilter: nf_queue: don't assume sk is full socket'. Signed-off-by: Florian Westphal <fw@strlen.de> |