Commit Graph

19 Commits

Author SHA1 Message Date
Mark Yao
8814b40bf6 drm/rockchip: dw_hdmi: introduce the pclk for grf
For RK3399's GRF module, if we want to operate the graphic related grf
registers, we need to enable the pclk_vio_grf which supply power for VIO
GRF IOs, so it's better to introduce an optional grf clock in driver.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
2017-06-23 08:52:03 +08:00
Mark Yao
5e3bc6d1ab drm/rockchip: dw_hdmi: introduce the VPLL clock setting
For RK3399 HDMI, there is an external clock need for HDMI PHY,
and it should keep the same clock rate with VOP DCLK.

VPLL have supported the clock for HDMI PHY, but there is no
clock divider bewteen VPLL and HDMI PHY. So we need to set the
VPLL rate manually in HDMI driver.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
2017-06-23 08:52:03 +08:00
Mark Yao
6445e394c5 drm/rockchip: dw_hdmi: add RK3399 HDMI support
RK3399 and RK3288 shared the same HDMI IP controller, only some light
difference with GRF configure.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
2017-06-23 08:52:03 +08:00
Jose Abreu
b0febde779 drm/bridge/synopsys: dw-hdmi: Use bridge->mode_valid() callback
Now that we have a callback to check if bridge supports a given mode
we can use it in Synopsys Designware HDMI bridge so that we restrict
the number of probbed modes to the ones we can actually display.

Also, there is no need to use mode_fixup() callback as mode_valid()
will handle the mode validation.

NOTE: I also had to change the pdata declaration of mode_valid
custom callback so that the passed modes are const. I also changed
in the platforms I found. Not even compiled it though.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/3d8d449e4d13d2535fa292c75f5fa931de4a4fa8.1495720737.git.joabreu@synopsys.com
2017-06-05 12:09:50 +05:30
Jeffy Chen
8820b68bd3 drm/rockchip: Refactor the component match logic.
Currently we are adding all components from the dts, if one of their
drivers been disabled, we would not be able to bring up others.

Refactor component match logic, follow exynos drm.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490152880-21855-1-git-send-email-jeffy.chen@rock-chips.com
2017-03-24 14:48:58 -04:00
Kieran Bingham
2e6777e8d5 drm: bridge: dw-hdmi: Remove device type from platform data
The device type isn't used anymore now that workarounds and PHY-specific
operations are performed based on version information read at runtime.
Remove it.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-9-laurent.pinchart+renesas@ideasonboard.com
2017-03-10 15:36:38 +05:30
Laurent Pinchart
c608119dfd drm: bridge: dw-hdmi: Move IRQ and IO resource allocation to common code
There's no need to duplicate identical code in multiple drivers (two at
the moment, one more to come soon). Move it to the dw-hdmi core where it
can be shared. If resource allocation ever becomes device-specific later
we'll always have the option of splitting it out again.

While it at pass the platform device to the bind function to avoid
having to cast struct device to struct platform_device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-8-laurent.pinchart+renesas@ideasonboard.com
2017-01-18 09:29:32 +05:30
Laurent Pinchart
ecaa98f1e6 drm: bridge: dw-hdmi: Remove unneeded arguments to bind/unbind functions
The master argument isn't used. The data argument, a void pointer, is
used by the bind function only where it's cast to a drm_device pointer,
which can easily be obtained from the encoder argument instead. Remove
them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-3-laurent.pinchart+renesas@ideasonboard.com
2017-01-18 09:29:30 +05:30
John Keeping
a38656958e drm/rockchip: dw_hdmi: remove unused #include
drm_encoder_slave is not used in this file.

Signed-off-by: John Keeping <john@metanate.com>
2016-07-19 09:42:18 +08:00
Mark Yao
4e257d9eee drm/rockchip: get rid of rockchip_drm_crtc_mode_config
We need to take care of the vop status when use
rockchip_drm_crtc_mode_config, if vop is disabled,
the function would failed, that is terrible.

Save output_type and output_mode into rockchip_crtc_state,
it's nice to make them into atomic.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: John Keeping <john@metanate.com>
2016-05-03 14:11:23 +08:00
Douglas Anderson
06b898ec84 drm/rockchip: dw_hdmi: Don't call platform_set_drvdata()
The Rockchip dw_hdmi driver just called platform_set_drvdata() to get
your hopes up that maybe, somehow, you'd be able to retrieve the 'struct
rockchip_hdmi' from a pointer to the 'struct device'.  You can't.  When
we call dw_hdmi_bind() the main driver calls dev_set_drvdata(), which
clobbers our setting.

Let's just remove the platform_set_drvdata() to avoid dashing people's
hopes.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
2016-03-28 14:48:32 +08:00
Douglas Anderson
948cf42700 drm/rockchip: dw_hdmi: Call drm_encoder_cleanup() in error path
The drm_encoder_cleanup() was missing both from the error path of
dw_hdmi_rockchip_bind().  This caused a crash when slub_debug was
enabled and we ended up deferring probe of HDMI at boot.

This call isn't needed from unbind() because if dw_hdmi_bind() returns
no error then it takes over the job of freeing the encoder (in
dw_hdmi_unbind).

Signed-off-by: Douglas Anderson <dianders@chromium.org>
2016-03-28 14:48:31 +08:00
Philipp Zabel
1645061679 drm/rockchip: remove rockchip_drm_encoder_get_mux_id
It is replaced by drm_of_encoder_active_endpoint_id.

Suggested-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Yakir Yang <ykk@rock-chips.com>
[for dw_hdmi-rockchip]
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01 08:33:38 +01:00
Mark Yao
a8eef71d38 drm/rockchip: dw_hdmi: use encoder enable function
encoder.enable is more compatible to atomic api than encoder.prepare/commit

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-28 08:57:16 +08:00
Ville Syrjälä
28c508ece6 drm/rockchip: Constify function pointer structs
Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.ko:
-.rodata                      772
+.rodata                      828
-.data                        148
+.data                         92

 drivers/gpu/drm/rockchip/rockchipdrm.ko:
-.rodata                      748
+.rodata                      760
-.data                        448
+.data                        436

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-25-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-15 13:48:19 +01:00
Ville Syrjälä
13a3d91f17 drm: Pass 'name' to drm_encoder_init()
Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.

@@
identifier dev, encoder, funcs;
@@
 int drm_encoder_init(struct drm_device *dev,
                      struct drm_encoder *encoder,
                      const struct drm_encoder_funcs *funcs,
                      int encoder_type
+                     ,const char *name, int DOTDOTDOT
                      )
{ ... }

@@
identifier dev, encoder, funcs;
@@
 int drm_encoder_init(struct drm_device *dev,
                      struct drm_encoder *encoder,
                      const struct drm_encoder_funcs *funcs,
                      int encoder_type
+                     ,const char *name, int DOTDOTDOT
                      );

@@
expression E1, E2, E3, E4;
@@
 drm_encoder_init(E1, E2, E3, E4
+                 ,NULL
                  )

v2: Add ', or NULL...' to @name kernel doc (Jani)
    Annotate the function with __printf() attribute (Jani)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-11 09:13:20 +01:00
Yakir Yang
1dbee1a3c3 drm: rockchip/dw_hdmi-rockchip: improve for HDMI electrical test
When pixel clock less than 148.5MHz, make sloopboost=2 tklvl=20
cklvl=13 increase rasing/falling time and increase data & clock
voltage driver.

When pixel clock less than 74.25MHz, make sloopboost=0 tklvl=19
cklvl=18, increase data and clock voltage driver.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-01 10:54:13 +01:00
Yakir Yang
034705a48b drm: bridge/dw_hdmi: separate VLEVCTRL settting into platform driver
Because of iMX6 & Rockchip have differnet mpll config parameter,
the VLEVCTRL parameter would be different. In this case we should
separate VLEVCTRL setting from the common dw_hdmi driver, config
this parameter in platform driver(dw_hdmi-imx and dw_hdmi-rockchip)

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-01 10:54:13 +01:00
Andy Yan
12b9f204e8 drm: bridge/dw_hdmi: add rockchip rk3288 support
Rockchip RK3288 hdmi is compatible with dw_hdmi

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-01-07 18:32:00 +01:00