Add a test modelled on the RFI flush test which counts the number
of L1D misses doing a simple syscall with the entry flush on and off.
For simplicity of backporting, this test duplicates a lot of code from
rfi_flush. We clean that up in the next patch.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We are about to add an entry flush. The rfi (exit) flush test measures
the number of L1D flushes over a syscall with the RFI flush enabled and
disabled. But if the entry flush is also enabled, the effect of enabling
and disabling the RFI flush is masked.
If there is a debugfs entry for the entry flush, disable it during the RFI
flush and restore it later.
Reported-by: Spoorthy S <spoorts2@in.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The eeh-basic test got its own 60 seconds timeout (defined in commit
414f50434a "selftests/eeh: Bump EEH wait time to 60s") per breakable
device.
And we have discovered that the number of breakable devices varies
on different hardware. The device recovery time ranges from 0 to 35
seconds. In our test pool it will take about 30 seconds to run on a
Power8 system that with 5 breakable devices, 60 seconds to run on a
Power9 system that with 4 breakable devices.
Extend the timeout setting in the kselftest framework to 5 minutes
to give it a chance to finish.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201023024539.9512-1-po-hsu.lin@canonical.com
Some architectures have strict alignment requirements. In that case,
the BPF verifier detects if a program has unaligned accesses and
rejects them. A user can pass BPF_F_ANY_ALIGNMENT to a program to
override this check. That, however, will only work when a privileged
user loads a program. An unprivileged user loading a program with this
flag will be rejected prior entering the verifier.
Hence, it does not make sense to load unprivileged programs without
strict alignment when testing the verifier. This patch avoids exactly
that.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-3-bjorn.topel@gmail.com
The selftests/bpf Makefile includes system include directories from
the host, when building BPF programs. On RISC-V glibc requires that
__riscv_xlen is defined. This is not the case for "clang -target bpf",
which messes up __WORDSIZE (errno.h -> ... -> wordsize.h) and breaks
the build.
By explicitly defining __risc_xlen correctly for riscv, we can
workaround this.
Fixes: 167381f3ea ("selftests/bpf: Makefile fix "missing" headers on build with -idirafter")
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-2-bjorn.topel@gmail.com
Pull Kunit fixes from Shuah Khan:
"Several fixes to Kunit documentation and tools, and to not pollute
the source directory.
Also remove the incorrect kunit .gitattributes file"
* tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix display of failed expectations for strings
kunit: tool: fix extra trailing \n in raw + parsed test output
kunit: tool: print out stderr from make (like build warnings)
KUnit: Docs: usage: wording fixes
KUnit: Docs: style: fix some Kconfig example issues
KUnit: Docs: fix a wording typo
kunit: Do not pollute source directory with generated files (test.log)
kunit: Do not pollute source directory with generated files (.kunitconfig)
kunit: tool: fix pre-existing python type annotation errors
kunit: Fix kunit.py parse subcommand (use null build_dir)
kunit: tool: unmark test_data as binary blobs
Use a statically generated key for signing the enclave, because
generating keys on the fly can eat the kernel entropy pool. Another
good reason for doing this is predictable builds. The RSA has been
arbitrarily selected. It's contents do not matter.
This also makes the selftest execute a lot quicker instead of the delay
that it had before (because of slow key generation).
[ bp: Disambiguate "static key" which means something else in the
kernel, fix typos. ]
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-kselftest@vger.kernel.org
Link: https://lkml.kernel.org/r/20201118170640.39629-1-jarkko@kernel.org
The test forks a child process, updates the local storage to set/unset
the securexec bit.
The BPF program in the test attaches to bprm_creds_for_exec which checks
the local storage of the current task to set the secureexec bit on the
binary parameters (bprm).
The child then execs a bash command with the environment variable
TMPDIR set in the envp. The bash command returns a different exit code
based on its observed value of the TMPDIR variable.
Since TMPDIR is one of the variables that is ignored by the dynamic
loader when the secureexec bit is set, one should expect the
child execution to not see this value when the secureexec bit is set.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201117232929.2156341-2-kpsingh@chromium.org
Add missing define of ALIGN_DOWN to make the test build and run. In
addition, __sg_alloc_table_from_pages now support unaligned maximum
segment, so adapt the test result accordingly.
Fixes: 07da1223ec ("lib/scatterlist: Add support in dynamic allocation of SG table from pages")
Link: https://lore.kernel.org/r/20201115120623.139113-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Almost all tests do this anyway and the ones that don't don't
appear to care. Only vmx_set_nested_state_test assumes that
a feature (VMX) is disabled until later setting the supported
CPUIDs. It's better to disable that explicitly anyway.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-11-drjones@redhat.com>
[Restore CPUID_VMX, or vmx_set_nested_state breaks. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From second fragment on, IPV6FR program must stop the dissection of IPV6
fragmented packet. This is the same approach used for IPV4 fragmentation.
This fixes the flow keys calculation for the upper-layer protocols.
Note that according to RFC8200, the first fragment packet must include
the upper-layer header.
Signed-off-by: Santucci Pierpaolo <santucci@epigenesys.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/X7JUzUj34ceE2wBm@santucci.pierpaolo
Introduce new vm_create variants that also takes a number of vcpus,
an amount of per-vcpu pages, and optionally a list of vcpuids. These
variants will create default VMs with enough additional pages to
cover the vcpu stacks, per-vcpu pages, and pagetable pages for all.
The new 'default' variant uses VM_MODE_DEFAULT, whereas the other
new variant accepts the mode as a parameter.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-6-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nothing sets USE_CLEAR_DIRTY_LOG anymore, so anything it surrounds
is dead code.
However, it is the recommended way to use the dirty page bitmap
for new enough kernel, so use it whenever KVM has the
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 capability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's only used to override the existing dirty ring size/count. If
with a bigger ring count, we test async of dirty ring. If with a
smaller ring count, we test ring full code path. Async is default.
It has no use for non-dirty-ring tests.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012241.6208-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously the dirty ring test was working in synchronous way, because
only with a vmexit (with that it was the ring full event) we'll know
the hardware dirty bits will be flushed to the dirty ring.
With this patch we first introduce a vcpu kick mechanism using SIGUSR1,
which guarantees a vmexit and also therefore the flushing of hardware
dirty bits. Once this is in place, we can keep the vcpu dirty work
asynchronous of the whole collection procedure now. Still, we need
to be very careful that when reaching the ring buffer soft limit
(KVM_EXIT_DIRTY_RING_FULL) we must collect the dirty bits before
continuing the vcpu.
Further increase the dirty ring size to current maximum to make sure
we torture more on the no-ring-full case, which should be the major
scenario when the hypervisors like QEMU would like to use this feature.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012239.6159-1-peterx@redhat.com>
[Use KVM_SET_SIGNAL_MASK+sigwait instead of a signal handler. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the initial dirty ring buffer test.
The current test implements the userspace dirty ring collection, by
only reaping the dirty ring when the ring is full.
So it's still running synchronously like this:
vcpu main thread
1. vcpu dirties pages
2. vcpu gets dirty ring full
(userspace exit)
3. main thread waits until full
(so hardware buffers flushed)
4. main thread collects
5. main thread continues vcpu
6. vcpu continues, goes back to 1
We can't directly collects dirty bits during vcpu execution because
otherwise we can't guarantee the hardware dirty bits were flushed when
we collect and we're very strict on the dirty bits so otherwise we can
fail the future verify procedure. A follow up patch will make this
test to support async just like the existing dirty log test, by adding
a vcpu kick mechanism.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012237.6111-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend the KVM_SET_SREGS test to verify that all supported CR4 bits, as
enumerated by KVM, can be set before KVM_SET_CPUID2, i.e. without first
defining the vCPU model. KVM is supposed to skip guest CPUID checks
when host userspace is stuffing guest state.
Check the inverse as well, i.e. that KVM rejects KVM_SET_REGS if CR4
has one or more unsupported bits set.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201007014417.29276-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-11-14
1) Add BTF generation for kernel modules and extend BTF infra in kernel
e.g. support for split BTF loading and validation, from Andrii Nakryiko.
2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
on inlined branch conditions, from Alexei Starovoitov.
3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.
4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
infra, from Martin KaFai Lau.
5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
XDP_REDIRECT path, from Lorenzo Bianconi.
6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
context, from Song Liu.
7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
for different target archs on same source tree, from Jean-Philippe Brucker.
8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.
9) Move functionality from test_tcpbpf_user into the test_progs framework so it
can run in BPF CI, from Alexander Duyck.
10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.
Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.
[0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
net: mlx5: Add xdp tx return bulking support
net: mvpp2: Add xdp tx return bulking support
net: mvneta: Add xdp tx return bulking support
net: page_pool: Add bulk support for ptr_ring
net: xdp: Introduce bulking for xdp tx return path
bpf: Expose bpf_d_path helper to sleepable LSM hooks
bpf: Augment the set of sleepable LSM hooks
bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Rename some functions in bpf_sk_storage
bpf: Folding omem_charge() into sk_storage_charge()
selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
selftests/bpf: Add skb_pkt_end test
bpf: Support for pointers beyond pkt_end.
tools/bpf: Always run the *-clean recipes
tools/bpf: Add bootstrap/ to .gitignore
bpf: Fix NULL dereference in bpf_task_storage
tools/bpftool: Fix build slowdown
tools/runqslower: Build bpftool using HOSTCC
tools/runqslower: Enable out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently verifier enforces return code checks for subprograms in the
same manner as it does for program entry points. This prevents returning
arbitrary scalar values from subprograms. Scalar type of returned values
is checked by btf_prepare_func_args() and hence it should be safe to
allow only scalars for now. Relax return code checks for subprograms and
allow any correct scalar values.
Fixes: 51c39bb1d5 (bpf: Introduce function-by-function verification)
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201113171756.90594-1-me@ubique.spb.ru
This patch tests storing the task's related info into the
bpf_sk_storage by fentry/fexit tracing at listen, accept,
and connect. It also tests the raw_tp at inet_sock_set_state.
A negative test is done by tracing the bpf_sk_storage_free()
and using bpf_sk_storage_get() at the same time. It ensures
this bpf program cannot load.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201112211320.2587537-1-kafai@fb.com
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:
- arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for
ENETC
Current release - bugs in new features:
- mptcp: provide rmem[0] limit offset to fix oops
Previous release - regressions:
- IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
calculations
- lan743x: correctly handle chips with internal PHY
- bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
- mlx5e: Fix VXLAN port table synchronization after function reload
Previous release - always broken:
- bpf: Zero-fill re-used per-cpu map element
- fix out-of-order UDP packets when forwarding with UDP GSO fraglists
turned on:
- fix UDP header access on Fast/frag0 UDP GRO
- fix IP header access and skb lookup on Fast/frag0 UDP GRO
- ethtool: netlink: add missing netdev_features_change() call
- net: Update window_clamp if SOCK_RCVBUF is set
- igc: Fix returning wrong statistics
- ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload
- tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies
- r8169: disable hw csum for short packets on all chip versions
- vrf: Fix fast path output packet handling with async Netfilter
rules"
* tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
lan743x: fix use of uninitialized variable
net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO
net: udp: fix UDP header access on Fast/frag0 UDP GRO
devlink: Avoid overwriting port attributes of registered port
vrf: Fix fast path output packet handling with async Netfilter rules
cosa: Add missing kfree in error path of cosa_write
net: switch to the kernel.org patchwork instance
ch_ktls: stop the txq if reaches threshold
ch_ktls: tcb update fails sometimes
ch_ktls/cxgb4: handle partial tag alone SKBs
ch_ktls: don't free skb before sending FIN
ch_ktls: packet handling prior to start marker
ch_ktls: Correction in middle record handling
ch_ktls: missing handling of header alone
ch_ktls: Correction in trimmed_len calculation
cxgb4/ch_ktls: creating skbs causes panic
ch_ktls: Update cheksum information
ch_ktls: Correction in finding correct length
cxgb4/ch_ktls: decrypted bit is not enough
net/x25: Fix null-ptr-deref in x25_connect
...
This test will treat all non-zero return codes as failures, it will
make the pmtu.sh test script being marked as FAILED when some
sub-test got skipped.
Improve the result processing by
* Only mark the whole test script as SKIP when all of the
sub-tests were skipped
* If the sub-tests were either passed or skipped, the overall
result will be PASS
* If any of them has failed with return code 1 or anything bad
happened (e.g. return code 127 for command not found), the
overall result will be FAIL
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test uses return code 2 as a hard-coded skipped state, let's use
the kselftest framework skip code variable $ksft_skip instead to make
it more readable and easier to maintain.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In comment 173ca26e9b ("samples/bpf: add comprehensive ipip, ipip6,
ip6ip6 test") we added ip6ip6 test for bpf tunnel testing. But in commit
933a741e3b ("selftests/bpf: bpf tunnel test.") when we moved it to
the current folder, we didn't add it.
This patch add the ip6ip6 test back to bpf tunnel test. Update the ipip6's
topology for both IPv4 and IPv6 testing. Since iperf test is removed as
currect framework simplified it in purpose, I also removed unused tcp
checkings in test_tunnel_kern.c.
Fixes: 933a741e3b ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201110015013.1570716-2-liuhangbin@gmail.com
On older distros struct clone_args does not have a cgroup member,
leading to build errors:
cgroup_util.c: In function 'clone_into_cgroup':
cgroup_util.c:343:4: error: 'struct clone_args' has no member named 'cgroup'
cgroup_util.c:346:33: error: invalid application of 'sizeof' to incomplete
type 'struct clone_args'
But the selftests already have a locally defined version of the
structure which is up to date, called __clone_args.
So use __clone_args which fixes the error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sachin Sant <sachinp@linux.vnet.ibm.com>>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Should be -d instead of -n for dry-run.
Fixes: 5da1918446 ("selftests/run_kselftest.sh: Make each test individually selectable")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The memfd tests emit several warnings:
fuse_test.c:261:7: warning: implicit declaration of function 'open'
fuse_test.c:67:6: warning: implicit declaration of function 'fcntl'
memfd_test.c:397:6: warning: implicit declaration of function 'fallocate'
memfd_test.c:64:7: warning: implicit declaration of function 'open'
memfd_test.c:90:6: warning: implicit declaration of function 'fcntl'
These are all caused by the test not including fcntl.h.
Instead of including linux/fcntl.h, include fcntl.h, which should
eventually cause the former to be included as well.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use clock_gettime() instead of deprecated ftime().
aperf.c: In function ‘main’:
aperf.c:58:2: warning: ‘ftime’ is deprecated [-Wdeprecated-declarations]
58 | ftime(&before);
| ^~~~~
In file included from aperf.c:9:
/usr/include/sys/timeb.h:39:12: note: declared here
39 | extern int ftime (struct timeb *__timebuf)
| ^~~~~
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the gpio selftests fail to build if the source tree is read
only:
make -j 160 -C tools/testing/selftests TARGETS=gpio
make[1]: Entering directory '/linux/tools/testing/selftests/gpio'
make OUTPUT=/linux/tools/gpio/ -C /linux/tools/gpio
make[2]: Entering directory '/linux/tools/gpio'
mkdir -p /linux/tools/gpio/include/linux 2>&1 || true
ln -sf /linux/tools/gpio/../../include/uapi/linux/gpio.h /linux/tools/gpio/include/linux/gpio.h
ln: failed to create symbolic link '/linux/tools/gpio/include/linux/gpio.h': Read-only file system
This happens because we ask make to build ../../../gpio (tools/gpio)
without pointing OUTPUT away from the source directory.
To fix it we create a subdirectory of the existing OUTPUT directory,
called tools-gpio, and tell tools/gpio to build in there.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Move the include of lib.mk up so that in a subsequent patch we can use
OUTPUT, which is initialised by lib.mk, in the definition of the GPIO
variables.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use TEST_GEN_PROGS_EXTENDED rather than TEST_PROGS_EXTENDED.
That tells the lib.mk logic that the files it references are to be
generated by the Makefile.
Having done that we don't need to override the all rule.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
For simplcity, strip all trailing whitespace from parsed output.
I imagine no one is printing out meaningful trailing whitespace via
KUNIT_FAIL() or similar, and that if they are, they really shouldn't.
`isolate_kunit_output()` yielded liens with trailing \n, which results
in artifacty output like this:
$ ./tools/testing/kunit/kunit.py run
[16:16:46] [FAILED] example_simple_test
[16:16:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[16:16:46] Expected 1 + 1 == 3, but
[16:16:46] 1 + 1 == 2
[16:16:46] 3 == 3
[16:16:46] not ok 1 - example_simple_test
[16:16:46]
After this change:
[16:16:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[16:16:46] Expected 1 + 1 == 3, but
[16:16:46] 1 + 1 == 2
[16:16:46] 3 == 3
[16:16:46] not ok 1 - example_simple_test
[16:16:46]
We should *not* be expecting lines to end with \n in kunit_tool_test.py
for this reason.
Do the same for `raw_output()` as well which suffers from the same
issue.
This is a followup to [1], but rebased onto kunit-fixes to pick up the
other raw_output() fix and fixes for kunit_tool_test.py.
[1] https://lore.kernel.org/linux-kselftest/20201020233219.4146059-1-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
