The bootflag.o is obj-y (always built in). It will never be
modular, so using module_init as an alias for __initcall is
somewhat misleading.
Fix this up now, so that we can relocate module_init from
init.h into module.h in the future. If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.
Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups. As __initcall gets
mapped onto device_initcall, our use of arch_initcall (which
makes sense for arch code) will thus change this registration
from level 6-device to level 3-arch (i.e. slightly earlier).
However no observable impact of that small difference has
been observed during testing, or is expected.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The devicetree.o is built for "OF" -- which is bool, and hence
this code is either present or absent. It will never be modular,
so using module_init as an alias for __initcall can be somewhat
misleading.
Fix this up now, so that we can relocate module_init from
init.h into module.h in the future. If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.
Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups. As __initcall gets
mapped onto device_initcall, our use of device_initcall
directly in this change means that the runtime impact is
zero -- it will remain at level 6 in initcall ordering.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
I noticed that my MPX tracepoints were producing garbage for the
lower and upper bounds:
mpx_bounds_register_exception: address referenced: 0x00007fffffffccb7 bounds: lower: 0x0 ~upper: 0xffffffffffffffff
mpx_bounds_register_exception: address referenced: 0x00007fffffffccbf bounds: lower: 0x0 ~upper: 0xffffffffffffffff
This is, of course, bogus because 0x00007fffffffccbf is *within*
the bounds. I assumed that my instruction decoder was bad and
went looking at it. But I eventually realized that I was
getting a '0' offset back from xstate_offsets[BNDREGS].
It was being skipped in the initialization, which is obviously
bogus, so remove the extra leaf++.
This also goes an initializes xstate_offsets/sizes[] to -1 so
so that bugs like this will oops instead of silently failing
in interesting ways.
This was introduced by:
39f1acd ("x86/fpu/xstate: Don't assume the first zero xfeatures zero bit means the end")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@sr71.net
Link: http://lkml.kernel.org/r/20150611193400.2E0B00DB@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the crash kernel is loaded above 4GiB in memory, the
first kernel allocates only 72MiB of low-memory for the DMA
requirements of the second kernel. On systems with many
devices this is not enough and causes device driver
initialization errors and failed crash dumps. Testing by
SUSE and Redhat has shown that 256MiB is a good default
value for now and the discussion has lead to this value as
well. So set this default value to 256MiB to make sure there
is enough memory available for DMA.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[ Reflow comment. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: kexec@lists.infradead.org
Link: http://lkml.kernel.org/r/1433500202-25531-4-git-send-email-joro@8bytes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we boot a kdump kernel in high memory, there is by
default only 72MB of low memory available. The swiotlb code
takes 64MB of it (by default) so that there are only 8MB
left to allocate from. On systems with many devices this
causes page allocator warnings from
dma_generic_alloc_coherent():
systemd-udevd: page allocation failure: order:0, mode:0x280d4
CPU: 0 PID: 197 Comm: systemd-udevd Tainted: G W
3.12.28-4-default #1 Hardware name: HP ProLiant DL980 G7, BIOS
P66 07/30/2012 ffff8800781335e0 ffffffff8150b1db 00000000000280d4 ffffffff8113af90
0000000000000000 0000000000000000 ffff88007efdbb00 0000000100000000
0000000000000000 0000000000000000 0000000000000000 0000000000000001
Call Trace:
dump_trace+0x7d/0x2d0
show_stack_log_lvl+0x94/0x170
show_stack+0x21/0x50
dump_stack+0x41/0x51
warn_alloc_failed+0xf0/0x160
__alloc_pages_slowpath+0x72f/0x796
__alloc_pages_nodemask+0x1ea/0x210
dma_generic_alloc_coherent+0x96/0x140
x86_swiotlb_alloc_coherent+0x1c/0x50
ttm_dma_pool_alloc_new_pages+0xab/0x320 [ttm]
ttm_dma_populate+0x3ce/0x640 [ttm]
ttm_tt_bind+0x36/0x60 [ttm]
ttm_bo_handle_move_mem+0x55f/0x5c0 [ttm]
ttm_bo_move_buffer+0x105/0x130 [ttm]
ttm_bo_validate+0xc1/0x130 [ttm]
ttm_bo_init+0x24b/0x400 [ttm]
radeon_bo_create+0x16c/0x200 [radeon]
radeon_ring_init+0x11e/0x2b0 [radeon]
r100_cp_init+0x123/0x5b0 [radeon]
r100_startup+0x194/0x230 [radeon]
r100_init+0x223/0x410 [radeon]
radeon_device_init+0x6af/0x830 [radeon]
radeon_driver_load_kms+0x89/0x180 [radeon]
drm_get_pci_dev+0x121/0x2f0 [drm]
local_pci_probe+0x39/0x60
pci_device_probe+0xa9/0x120
driver_probe_device+0x9d/0x3d0
__driver_attach+0x8b/0x90
bus_for_each_dev+0x5b/0x90
bus_add_driver+0x1f8/0x2c0
driver_register+0x5b/0xe0
do_one_initcall+0xf2/0x1a0
load_module+0x1207/0x1c70
SYSC_finit_module+0x75/0xa0
system_call_fastpath+0x16/0x1b
0x7fac533d2788
After these warnings the code enters a fall-back path and
allocated directly from the swiotlb aperture in the end.
So remove these warnings as this is not a fatal error.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[ Simplify, reflow comment. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: kexec@lists.infradead.org
Link: http://lkml.kernel.org/r/1433500202-25531-3-git-send-email-joro@8bytes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The uprobes code has a nice helper, is_64bit_mm(), that consults
both the runtime and compile-time flags for 32-bit support.
Instead of reinventing the wheel, pull it in to an x86 header so
we can use it for MPX.
I prefer passing the 'mm' around to test_thread_flag(TIF_IA32)
because it makes it explicit where the context is coming from.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183704.F0209999@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is the first in a series of MPX tracing patches.
I've found these extremely useful in the process of
debugging applications and the kernel code itself.
This exception hooks in to the bounds (#BR) exception
very early and allows capturing the key registers which
would influence how the exception is handled.
Note that bndcfgu/bndstatus are technically still
64-bit registers even in 32-bit mode.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183703.5FE2619A@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MPX has the _potential_ to cause some issues. Say part of your
init system tried to protect one of its components from buffer
overflows with MPX. If there were a false positive, it's
possible that MPX could keep a system from booting.
MPX could also potentially cause performance issues since it is
present in hot paths like the unmap path.
Allow it to be disabled at boot time.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150607183702.2E8B77AB@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The MPX code can only work on the current task. You can not,
for instance, enable MPX management in another process or
thread. You can also not handle a fault for another process or
thread.
Despite this, we pass a task_struct around prolifically. This
patch removes all of the task struct passing for code paths
where the code can not deal with another task (which turns out
to be all of them).
This has no functional changes. It's just a cleanup.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/20150607183702.6A81DA2C@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The MPX registers (bndcsr/bndcfgu/bndstatus) are not directly
accessible via normal instructions. They essentially act as
if they were floating point registers and are saved/restored
along with those registers.
There are two main paths in the MPX code where we care about
the contents of these registers:
1. #BR (bounds) faults
2. the prctl() code where we are setting MPX up
Both of those paths _might_ be called without the FPU having
been used. That means that 'tsk->thread.fpu.state' might
never be allocated.
Also, fpu_save_init() is not preempt-safe. It was a bug to
call it without disabling preemption. The new
get_xsave_addr() calls unlazy_fpu() instead and properly
disables preemption.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave@sr71.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/20150607183701.BC0D37CF@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The MPX code appears is calling a low-level FPU function
(copy_fpregs_to_fpstate()). This function is not able to
be called in all contexts, although it is safe to call
directly in some cases.
Although probably correct, the current code is ugly and
potentially error-prone. So, add a wrapper that calls
the (slightly) higher-level fpu__save() (which is preempt-
safe) and also ensures that we even *have* an FPU context
(in the case that this was called when in lazy FPU mode).
Ingo had this to say about the details about when we need
preemption disabled:
> it's indeed generally unsafe to access/copy FPU registers with preemption enabled,
> for two reasons:
>
> - on older systems that use FSAVE the instruction destroys FPU register
> contents, which has to be handled carefully
>
> - even on newer systems if we copy to FPU registers (which this code doesn't)
> then we don't want a context switch to occur in the middle of it, because a
> context switch will write to the fpstate, potentially overwriting our new data
> with old FPU state.
>
> But it's safe to access FPU registers with preemption enabled in a couple of
> special cases:
>
> - potentially destructively saving FPU registers: the signal handling code does
> this in copy_fpstate_to_sigframe(), because it can rely on the signal restore
> side to restore the original FPU state.
>
> - reading FPU registers on modern systems: we don't do this anywhere at the
> moment, mostly to keep symmetry with older systems where FSAVE is
> destructive.
>
> - initializing FPU registers on modern systems: fpu__clear() does this. Here
> it's safe because we don't copy from the fpstate.
>
> - directly writing FPU registers from user-space memory (!). We do this in
> fpu__restore_sig(), and it's safe because neither context switches nor
> irq-handler FPU use can corrupt the source context of the copy (which is
> user-space memory).
>
> Note that the MPX code's current use of copy_fpregs_to_fpstate() was safe I think,
> because:
>
> - MPX is predicated on eagerfpu, so the destructive F[N]SAVE instruction won't be
> used.
>
> - the code was only reading FPU registers, and was doing it only in places that
> guaranteed that an FPU state was already active (i.e. didn't do it in
> kthreads)
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave@sr71.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/20150607183700.AA881696@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
get_xsave_addr() assumes that if an xsave bit is present in the
hardware (pcntxt_mask) that it is present in a given xsave
buffer. Due to an bug in the xsave code on all of the systems
that have MPX (and thus all the users of this code), that has
been a true assumption.
But, the bug is getting fixed, so our assumption is not going
to hold any more.
It's quite possible (and normal) for an enabled state to be
present on 'pcntxt_mask', but *not* in 'xstate_bv'. We need
to consult 'xstate_bv'.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183700.1E739B34@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Brian Gerst noticed that I did a weird rename in the following commit:
b2502b418e ("x86/asm/entry: Untangle 'system_call' into two entry points: entry_SYSCALL_64 and entry_INT80_32")
which renamed __NR_ia32_syscall_max to __NR_entry_INT80_compat_max.
Now the original name was a misnomer, but the new one is a misnomer as well,
as all the 32-bit compat syscall entry points (sysenter, syscall) share the
system call table, not just the INT80 based one.
Rename it to __NR_syscall_compat_max.
Reported-by: Brian Gerst <brgerst@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In include/linux/pci.h, we already #include <asm/pci.h>, so we don't need
to include <asm/pci.h> directly.
Remove the unnecessary includes. All the files here already include
<linux/pci.h>.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au> # sh
Acked-by: Ralf Baechle <ralf@linux-mips.org>
The 'system_call' entry points differ starkly between native 32-bit and 64-bit
kernels: on 32-bit kernels it defines the INT 0x80 entry point, while on
64-bit it's the SYSCALL entry point.
This is pretty confusing when looking at generic code, and it also obscures
the nature of the entry point at the assembly level.
So unangle this by splitting the name into its two uses:
system_call (32) -> entry_INT80_32
system_call (64) -> entry_SYSCALL_64
As per the generic naming scheme for x86 system call entry points:
entry_MNEMONIC_qualifier
where 'qualifier' is one of _32, _64 or _compat.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So the SYSENTER instruction is pretty quirky and it has different behavior
depending on bitness and CPU maker.
Yet we create a false sense of coherency by naming it 'ia32_sysenter_target'
in both of the cases.
Split the name into its two uses:
ia32_sysenter_target (32) -> entry_SYSENTER_32
ia32_sysenter_target (64) -> entry_SYSENTER_compat
As per the generic naming scheme for x86 system call entry points:
entry_MNEMONIC_qualifier
where 'qualifier' is one of _32, _64 or _compat.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rename the following system call entry points:
ia32_cstar_target -> entry_SYSCALL_compat
ia32_syscall -> entry_INT80_compat
The generic naming scheme for x86 system call entry points is:
entry_MNEMONIC_qualifier
where 'qualifier' is one of _32, _64 or _compat.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
PEBSv3 as present on Skylake fixed the long standing issue of the
status bits. They now really reflect the events that generated the
record.
Tested-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After enlarging the PEBS interrupt threshold, there may be some mixed up
PEBS samples which are discarded by the kernel.
This patch makes the kernel emit a PERF_RECORD_LOST_SAMPLES record with
the number of possible discarded records when it is impossible to demux
the samples.
It makes sure the user is not left in the dark about such discards.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285195-14269-8-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently the PEBS buffer size is 4k, it can only hold about 21
PEBS records. This patch enlarges the PEBS buffer size to 64k
(the same as the BTS buffer).
64k memory can hold about 330 PEBS records. This will significantly
reduce the number of PMIs when batched PEBS interrupts are enabled.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-7-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Flush the PEBS buffer during context switches if PEBS interrupt threshold
is larger than one. This allows perf to supply TID for sample outputs.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-6-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
PEBS always had the capability to log samples to its buffers without
an interrupt. Traditionally perf has not used this but always set the
PEBS threshold to one.
For frequently occurring events (like cycles or branches or load/store)
this in term requires using a relatively high sampling period to avoid
overloading the system, by only processing PMIs. This in term increases
sampling error.
For the common cases we still need to use the PMI because the PEBS
hardware has various limitations. The biggest one is that it can not
supply a callgraph. It also requires setting a fixed period, as the
hardware does not support adaptive period. Another issue is that it
cannot supply a time stamp and some other options. To supply a TID it
requires flushing on context switch. It can however supply the IP, the
load/store address, TSX information, registers, and some other things.
So we can make PEBS work for some specific cases, basically as long as
you can do without a callgraph and can set the period you can use this
new PEBS mode.
The main benefit is the ability to support much lower sampling period
(down to -c 1000) without extensive overhead.
One use cases is for example to increase the resolution of the c2c tool.
Another is double checking when you suspect the standard sampling has
too much sampling error.
Some numbers on the overhead, using cycle soak, comparing the elapsed
time from "kernbench -M -H" between plain (threshold set to one) and
multi (large threshold).
The test command for plain:
"perf record --time -e cycles:p -c $period -- kernbench -M -H"
The test command for multi:
"perf record --no-time -e cycles:p -c $period -- kernbench -M -H"
( The only difference of test command between multi and plain is time
stamp options. Since time stamp is not supported by large PEBS
threshold, it can be used as a flag to indicate if large threshold is
enabled during the test. )
period plain(Sec) multi(Sec) Delta
10003 32.7 16.5 16.2
20003 30.2 16.2 14.0
40003 18.6 14.1 4.5
80003 16.8 14.6 2.2
100003 16.9 14.1 2.8
800003 15.4 15.7 -0.3
1000003 15.3 15.2 0.2
2000003 15.3 15.1 0.1
With periods below 100003, plain (threshold one) cause much more
overhead. With 10003 sampling period, the Elapsed Time for multi is
even 2X faster than plain.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-5-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the PEBS interrupt threshold is larger than one record and the
machine supports multiple PEBS events, the records of these events are
mixed up and we need to demultiplex them.
Demuxing the records is hard because the hardware is deficient. The
hardware has two issues that, when combined, create impossible
scenarios to demux.
The first issue is that the 'status' field of the PEBS record is a copy
of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a
problem let us first describe the regular PEBS cycle:
A) the CTRn value reaches 0:
- the corresponding bit in GLOBAL_STATUS gets set
- we start arming the hardware assist
< some unspecified amount of time later -- this could cover multiple
events of interest >
B) the hardware assist is armed, any next event will trigger it
C) a matching event happens:
- the hardware assist triggers and generates a PEBS record
this includes a copy of GLOBAL_STATUS at this moment
- if we auto-reload we (re)set CTRn
- we clear the relevant bit in GLOBAL_STATUS
Now consider the following chain of events:
A0, B0, A1, C0
The event generated for counter 0 will include a status with counter 1
set, even though its not at all related to the record. A similar thing
can happen with a !PEBS event if it just happens to overflow at the
right moment.
The second issue is that the hardware will only emit one record for two
or more counters if the event that triggers the assist is 'close'. The
'close' can be several cycles. In some cases even the complete assist,
if the event is something that doesn't need retirement.
For instance, consider this chain of events:
A0, B0, A1, B1, C01
Where C01 is an event that triggers both hardware assists, we will
generate but a single record, but again with both counters listed in the
status field.
This time the record pertains to both events.
Note that these two cases are different but undistinguishable with the
data as generated. Therefore demuxing records with multiple PEBS bits
(we can safely ignore status bits for !PEBS counters) is impossible.
Furthermore we cannot emit the record to both events because that might
cause a data leak -- the events might not have the same privileges -- so
what this patch does is discard such events.
The assumption/hope is that such discards will be rare.
Here lists some possible ways you may get high discard rate.
- when you count the same thing multiple times. But it is not a useful
configuration.
- you can be unfortunate if you measure with a userspace only PEBS
event along with either a kernel or unrestricted PEBS event. Imagine
the event triggering and setting the overflow flag right before
entering the kernel. Then all kernel side events will end up with
multiple bits set.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
[ Changelog improvements. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move code that sets up the PEBS sample data to a separate function.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-3-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a fixed period is specified, this patch makes perf use the PEBS
auto reload mechanism. This makes normal profiling faster, because
it avoids one costly MSR write in the PMI handler.
However, the reset value will be loaded by hardware assist. There is a
small delay compared to the previous non-auto-reload mechanism. The
delay time is arbitrary, but very small. The assist cost is 400-800
cycles, assuming common cases with everything cached. The minimum period
the patch currently uses is 10000. In that extreme case it can be ~10%
if cycles are used.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-2-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch enables support for branch sampling filter
for indirect jumps (IND_JUMP). It enables LBR IND_JMP
filtering where available. There is also software filtering
support.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: dsahern@gmail.com
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/1431637800-31061-3-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
preempt_schedule_context() is a tracing safe preemption point but it's
only used when CONFIG_CONTEXT_TRACKING=y. Other configs have tracing
recursion issues since commit:
b30f0e3ffe ("sched/preempt: Optimize preemption operations on __schedule() callers")
introduced function based preemp_count_*() ops.
Lets make it available on all configs and give it a more appropriate
name for its new position.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433432349-1021-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
CBOX counters are increased to 48b on HSX.
Correct the MSR address for HSWEP_U_MSR_PMON_CTR0 and
HSWEP_U_MSR_PMON_CTL0.
See specification in:
http://www.intel.com/content/www/us/en/processors/xeon/
xeon-e5-v3-uncore-performance-monitoring.html
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1432645835-7918-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change the type of variables and function prototypes to be in
alignment with what the x86_*() / __x86_*() family/model
functions return.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433436928-31903-21-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Shevchenko reported machine freezes when booting latest tip
on 32-bit setups. Problem is, the builtin microcode handling cannot
really work that early, when we haven't even enabled paging.
A proper fix would involve handling that case specially as every
other early 32-bit boot case in the microcode loader and would
require much more involved changes for which it is too late now,
more than a week before the upcoming merge window.
So, disable the builtin microcode loading on 32-bit for now.
Reported-and-tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433436928-31903-20-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In talking to Aravind recently about making certain AMD topology
attributes available to the MCE injection module, it seemed like
that CONFIG_X86_HT thing is more or less superfluous. It is
def_bool y, depends on SMP and gets enabled in the majority of
.configs - distro and otherwise - out there.
So let's kill it and make code behind it depend directly on SMP.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Walter <dwalter@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jacob Shin <jacob.w.shin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433436928-31903-18-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add the necessary changes to do_machine_check() to be able to
process MCEs signaled as local MCEs. Typically, only recoverable
errors (SRAR type) will be Signaled as LMCE. The architecture
does not restrict to only those errors, however.
When errors are signaled as LMCE, there is no need for the MCE
handler to perform rendezvous with other logical processors
unlike earlier processors that would broadcast machine check
errors.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1433436928-31903-17-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Initialize and prepare for handling LMCEs. Add a boot-time
option to disable LMCEs.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
[ Simplify stuff, align statements for better readability, reflow comments; kill
unused lmce_clear(); save us an MSR write if LMCE is already enabled. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1433436928-31903-16-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- early_idt_handlers[] fix that fixes the build with bleeding edge
tooling
- build warning fix on GCC 5.1
- vm86 fix plus self-test to make it harder to break it again"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
x86/asm/entry/32, selftests: Add a selftest for kernel entries from VM86 mode
x86/boot: Add CONFIG_PARAVIRT_SPINLOCKS quirk to arch/x86/boot/compressed/misc.h
x86/asm/entry/32: Really make user_mode() work correctly for VM86 mode
Pull perf fixes from Ingo Molnar:
"The biggest chunk of the changes are two regression fixes: a HT
workaround fix and an event-group scheduling fix. It's been verified
with 5 days of fuzzer testing.
Other fixes:
- eBPF fix
- a BIOS breakage detection fix
- PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix a refactoring bug
perf/x86: Tweak broken BIOS rules during check_hw_exists()
perf/x86/intel/pt: Untangle pt_buffer_reset_markers()
perf: Disallow sparse AUX allocations for non-SG PMUs in overwrite mode
perf/x86: Improve HT workaround GP counter constraint
perf/x86: Fix event/group validation
perf: Fix race in BPF program unregister
Deobfuscate the 'found' logic, it can be replaced with a simple:
if (!pa_data)
return;
and 'found' can be eliminated.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1433398729-8314-1-git-send-email-weiyang@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 066450be41 ("perf/x86/intel/pt: Clean up the control flow
in pt_pmu_hw_init()") changed attribute initialization so that
only the first attribute gets initialized using
sysfs_attr_init(), which upsets lockdep.
This patch fixes the glitch so that all allocated attributes are
properly initialized thus fixing the lockdep warning reported by
Tvrtko and Imre.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reported-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: <linux-kernel@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The vsyscall code is entry code too, so move it to arch/x86/entry/vsyscall/.
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVa7zvAAoJEHm+PkMAQRiGtfMIAILs3sxFtrC1hApgcfRLF/7z
K34bwTRqErzqUO/orTwakEr9kSIpIL0zIPSryTCOTPZLfMGkQjhHXO3KR/DSbbTV
MZ8y/BM/yelFA/Np+1LjbiYjTNRnTRvCoaQihkIH8Rn02g7ob9HyL4gIGKpuGFcZ
04GacL2cgChqsRSACdNef948jCoJXKgcuDpe39DXphDWZnBKNZ3HFuJ6bryGJf9A
1/eCI4is85BNwKPemQUYR0xx83UIzDfrghatZP2mOCDDSA2MNg8HNxLTd12LGoQD
tfgX4B7aftzW9Y7GSEDfZ0IKm2NRzgPmCVj6PjVR/iI0lIK4Aq0Z/lDJxxEq3XQ=
=AJM5
-----END PGP SIGNATURE-----
Merge tag 'v4.1-rc6' into drm-next
Linux 4.1-rc6
backmerge 4.1-rc6 as some of the later pull reqs are based on newer bases
and I'd prefer to do the fixup myself.
Create a new directory hierarchy for the low level x86 entry code:
arch/x86/entry/*
This will host all the low level glue that is currently scattered
all across arch/x86/.
Start with entry_64.S and entry_32.S.
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nothing in <asm/io.h> uses anything from <linux/vmalloc.h>, so
remove it from there and fix up the resulting build problems
triggered on x86 {64|32}-bit {def|allmod|allno}configs.
The breakages were triggering in places where x86 builds relied
on vmalloc() facilities but did not include <linux/vmalloc.h>
explicitly and relied on the implicit inclusion via <asm/io.h>.
Also add:
- <linux/init.h> to <linux/io.h>
- <asm/pgtable_types> to <asm/io.h>
... which were two other implicit header file dependencies.
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[ Tidied up the changelog. ]
Acked-by: David Miller <davem@davemloft.net>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Colin Cross <ccross@android.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: James E.J. Bottomley <JBottomley@odin.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Kristen Carlson Accardi <kristen@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Suma Ramars <sramars@cisco.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We did try trimming whitespace surrounding the 'model name'
field in /proc/cpuinfo since reportedly some userspace uses it
in string comparisons and there were discrepancies:
[thetango@prarit ~]# grep "^model name" /proc/cpuinfo | uniq -c | sed 's/\ /_/g'
______1_model_name :_AMD_Opteron(TM)_Processor_6272
_____63_model_name :_AMD_Opteron(TM)_Processor_6272_________________
However, there were issues with overlapping buffers, string
sizes and non-byte-sized copies in the previous proposed
solutions; see Link tags below for the whole farce.
So, instead of diddling with this more, let's simply extend what
was there originally with trimming any present trailing
whitespace. Final result is really simple and obvious.
Testing with the most insane model IDs qemu can generate, looks
good:
.model_id = " My funny model ID CPU ",
______4_model_name :_My_funny_model_ID_CPU
.model_id = "My funny model ID CPU ",
______4_model_name :_My_funny_model_ID_CPU
.model_id = " My funny model ID CPU",
______4_model_name :_My_funny_model_ID_CPU
.model_id = " ",
______4_model_name :__
.model_id = "",
______4_model_name :_15/02
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1432050210-32036-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
retint_kernel doesn't require %rcx to be pointing to thread info
(anymore?), and the code on the two alternative paths is - not
really surprisingly - identical.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/556C664F020000780007FB64@mail.emea.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The early_idt_handlers asm code generates an array of entry
points spaced nine bytes apart. It's not really clear from that
code or from the places that reference it what's going on, and
the code only works in the first place because GAS never
generates two-byte JMP instructions when jumping to global
labels.
Clean up the code to generate the correct array stride (member size)
explicitly. This should be considerably more robust against
screw-ups, as GAS will warn if a .fill directive has a negative
count. Using '. =' to advance would have been even more robust
(it would generate an actual error if it tried to move
backwards), but it would pad with nulls, confusing anyone who
tries to disassemble the code. The new scheme should be much
clearer to future readers.
While we're at it, improve the comments and rename the array and
common code.
Binutils may start relaxing jumps to non-weak labels. If so,
this change will fix our build, and we may need to backport this
change.
Before, on x86_64:
0000000000000000 <early_idt_handlers>:
0: 6a 00 pushq $0x0
2: 6a 00 pushq $0x0
4: e9 00 00 00 00 jmpq 9 <early_idt_handlers+0x9>
5: R_X86_64_PC32 early_idt_handler-0x4
...
48: 66 90 xchg %ax,%ax
4a: 6a 08 pushq $0x8
4c: e9 00 00 00 00 jmpq 51 <early_idt_handlers+0x51>
4d: R_X86_64_PC32 early_idt_handler-0x4
...
117: 6a 00 pushq $0x0
119: 6a 1f pushq $0x1f
11b: e9 00 00 00 00 jmpq 120 <early_idt_handler>
11c: R_X86_64_PC32 early_idt_handler-0x4
After:
0000000000000000 <early_idt_handler_array>:
0: 6a 00 pushq $0x0
2: 6a 00 pushq $0x0
4: e9 14 01 00 00 jmpq 11d <early_idt_handler_common>
...
48: 6a 08 pushq $0x8
4a: e9 d1 00 00 00 jmpq 120 <early_idt_handler_common>
4f: cc int3
50: cc int3
...
117: 6a 00 pushq $0x0
119: 6a 1f pushq $0x1f
11b: eb 03 jmp 120 <early_idt_handler_common>
11d: cc int3
11e: cc int3
11f: cc int3
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Binutils <binutils@sourceware.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU changes from Paul E. McKenney:
- Initialization/Kconfig updates: hide most Kconfig options from unsuspecting users.
There's now a single high level configuration option:
*
* RCU Subsystem
*
Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)
Which if answered in the negative, leaves us with a single interactive
configuration option:
Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)
All the rest of the RCU options are configured automatically.
- Remove all uses of RCU-protected array indexes: replace the
rcu_[access|dereference]_index_check() APIs with READ_ONCE() and rcu_lockdep_assert().
- RCU CPU-hotplug cleanups.
- Updates to Tiny RCU: a race fix and further code shrinkage.
- RCU torture-testing updates: fixes, speedups, cleanups and
documentation updates.
- Miscellaneous fixes.
- Documentation updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So the dwarf2 annotations in low level assembly code have
become an increasing hindrance: unreadable, messy macros
mixed into some of the most security sensitive code paths
of the Linux kernel.
These debug info annotations don't even buy the upstream
kernel anything: dwarf driven stack unwinding has caused
problems in the past so it's out of tree, and the upstream
kernel only uses the much more robust framepointers based
stack unwinding method.
In addition to that there's a steady, slow bitrot going
on with these annotations, requiring frequent fixups.
There's no tooling and no functionality upstream that
keeps it correct.
So burn down the sick forest, allowing new, healthier growth:
27 files changed, 350 insertions(+), 1101 deletions(-)
Someone who has the willingness and time to do this
properly can attempt to reintroduce dwarf debuginfo in x86
assembly code plus dwarf unwinding from first principles,
with the following conditions:
- it should be maximally readable, and maximally low-key to
'ordinary' code reading and maintenance.
- find a build time method to insert dwarf annotations
automatically in the most common cases, for pop/push
instructions that manipulate the stack pointer. This could
be done for example via a preprocessing step that just
looks for common patterns - plus special annotations for
the few cases where we want to depart from the default.
We have hundreds of CFI annotations, so automating most of
that makes sense.
- it should come with build tooling checks that ensure that
CFI annotations are sensible. We've seen such efforts from
the framepointer side, and there's no reason it couldn't be
done on the dwarf side.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If you try to enable NOHZ_FULL on a guest today, you'll get
the following error when the guest tries to deactivate the
scheduler tick:
WARNING: CPU: 3 PID: 2182 at kernel/time/tick-sched.c:192 can_stop_full_tick+0xb9/0x290()
NO_HZ FULL will not work with unstable sched clock
CPU: 3 PID: 2182 Comm: kworker/3:1 Not tainted 4.0.0-10545-gb9bb6fb #204
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: events flush_to_ldisc
ffffffff8162a0c7 ffff88011f583e88 ffffffff814e6ba0 0000000000000002
ffff88011f583ed8 ffff88011f583ec8 ffffffff8104d095 ffff88011f583eb8
0000000000000000 0000000000000003 0000000000000001 0000000000000001
Call Trace:
<IRQ> [<ffffffff814e6ba0>] dump_stack+0x4f/0x7b
[<ffffffff8104d095>] warn_slowpath_common+0x85/0xc0
[<ffffffff8104d146>] warn_slowpath_fmt+0x46/0x50
[<ffffffff810bd2a9>] can_stop_full_tick+0xb9/0x290
[<ffffffff810bd9ed>] tick_nohz_irq_exit+0x8d/0xb0
[<ffffffff810511c5>] irq_exit+0xc5/0x130
[<ffffffff814f180a>] smp_apic_timer_interrupt+0x4a/0x60
[<ffffffff814eff5e>] apic_timer_interrupt+0x6e/0x80
<EOI> [<ffffffff814ee5d1>] ? _raw_spin_unlock_irqrestore+0x31/0x60
[<ffffffff8108bbc8>] __wake_up+0x48/0x60
[<ffffffff8134836c>] n_tty_receive_buf_common+0x49c/0xba0
[<ffffffff8134a6bf>] ? tty_ldisc_ref+0x1f/0x70
[<ffffffff81348a84>] n_tty_receive_buf2+0x14/0x20
[<ffffffff8134b390>] flush_to_ldisc+0xe0/0x120
[<ffffffff81064d05>] process_one_work+0x1d5/0x540
[<ffffffff81064c81>] ? process_one_work+0x151/0x540
[<ffffffff81065191>] worker_thread+0x121/0x470
[<ffffffff81065070>] ? process_one_work+0x540/0x540
[<ffffffff8106b4df>] kthread+0xef/0x110
[<ffffffff8106b3f0>] ? __kthread_parkme+0xa0/0xa0
[<ffffffff814ef4f2>] ret_from_fork+0x42/0x70
[<ffffffff8106b3f0>] ? __kthread_parkme+0xa0/0xa0
---[ end trace 06e3507544a38866 ]---
However, it turns out that kvmclock does provide a stable
sched_clock callback. So, let the scheduler know this which
in turn makes NOHZ_FULL work in the guest.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ACPI 6.0 formalizes e820-type-7 and efi-type-14 as persistent memory.
Mark it "reserved" and allow it to be claimed by a persistent memory
device driver.
This definition is in addition to the Linux kernel's existing type-12
definition that was recently added in support of shipping platforms with
NVDIMM support that predate ACPI 6.0 (which now classifies type-12 as
OEM reserved).
Note, /proc/iomem can be consulted for differentiating legacy
"Persistent Memory (legacy)" E820_PRAM vs standard "Persistent Memory"
E820_PMEM.
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Because mce is arch-specific x86 code, there is little or no
performance benefit of using rcu_dereference_index_check() over using
smp_load_acquire(). It also turns out that mce is the only place that
array-index-based RCU is used, and it would be convenient to drop
this portion of the RCU API.
This patch therefore changes rcu_dereference_index_check() uses to
smp_load_acquire(), but keeping the lockdep diagnostics, and also
changes rcu_access_index() uses to READ_ONCE().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: linux-edac@vger.kernel.org
Cc: Tony Luck <tony.luck@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
The former duplicate the functionalities of the latter but are
neither documented nor arch-independent.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lkml.kernel.org/r/1432645896-12588-9-git-send-email-bgolaszewski@baylibre.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We use pat_enabled in x86-specific code to see if PAT is enabled
or not but we're granting full access to it even though readers
do not need to set it. If, for instance, we granted access to it
to modules later they then could override the variable
setting... no bueno.
This renames pat_enabled to a new static variable __pat_enabled.
Folks are redirected to use pat_enabled() now.
Code that sets this can only be internal to pat.c. Apart from
the early kernel parameter "nopat" to disable PAT, we also have
a few cases that disable it later and make use of a helper
pat_disable(). It is wrapped under an ifdef but since that code
cannot run unless PAT was enabled its not required to wrap it
with ifdefs, unwrap that. Likewise, since "nopat" doesn't really
change non-PAT systems just remove that ifdef as well.
Although we could add and use an early_param_off(), these
helpers don't use __read_mostly but we want to keep
__read_mostly for __pat_enabled as this is a hot path -- upon
boot, for instance, a simple guest may see ~4k accesses to
pat_enabled(). Since __read_mostly early boot params are not
that common we don't add a helper for them just yet.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kyle McMartin <kyle@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com
Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is possible to enable CONFIG_MTRR and CONFIG_X86_PAT and end
up with a system with MTRR functionality disabled but PAT
functionality enabled. This can happen, for instance, when the
Xen hypervisor is used where MTRRs are not supported but PAT is.
This can happen on Linux as of commit
47591df505 ("xen: Support Xen pv-domains using PAT")
by Juergen, introduced in v3.19.
Technically, we should assume the proper CPU bits would be set
to disable MTRRs but we can't always rely on this. At least on
the Xen Hypervisor, for instance, only X86_FEATURE_MTRR was
disabled as of Xen 4.4 through Xen commit 586ab6a [0], but not
X86_FEATURE_K6_MTRR, X86_FEATURE_CENTAUR_MCR, or
X86_FEATURE_CYRIX_ARR for instance.
Roger Pau Monné has clarified though that although this is
technically true we will never support PVH on these CPU types so
Xen has no need to disable these bits on those systems. As per
Roger, AMD K6, Centaur and VIA chips don't have the necessary
hardware extensions to allow running PVH guests [1].
As per Toshi it is also possible for the BIOS to disable MTRR
support, in such cases get_mtrr_state() would update the MTRR
state as per the BIOS, we need to propagate this information as
well.
x86 MTRR code relies on quite a bit of checks for mtrr_if being
set to check to see if MTRRs did get set up. Instead, lets
provide a generic getter for that. This also adds a few checks
where they were not before which could potentially safeguard
ourselves against incorrect usage of MTRR where this was not
desirable.
Where possible match error codes as if MTRRs were disabled on
arch/x86/include/asm/mtrr.h.
Lastly, since disabling MTRRs can happen at run time and we
could end up with PAT enabled, best record now in our logs when
MTRRs are disabled.
[0] ~/devel/xen (git::stable-4.5)$ git describe --contains 586ab6a 4.4.0-rc1~18
[1] http://lists.xenproject.org/archives/html/xen-devel/2015-03/msg03460.html
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Stefan Bader <stefan.bader@canonical.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Ville Syrjälä <syrjala@sci.fi>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: bhelgaas@google.com
Cc: david.vrabel@citrix.com
Cc: jbeulich@suse.com
Cc: konrad.wilk@oracle.com
Cc: venkatesh.pallipadi@intel.com
Cc: ville.syrjala@linux.intel.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/1426893517-2511-3-git-send-email-mcgrof@do-not-panic.com
Link: http://lkml.kernel.org/r/1432628901-18044-12-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is only one user but since we're going to bury MTRR next
out of access to drivers, expose this last piece of API to
drivers in a general fashion only needing io.h for access to
helpers.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Abhilash Kesavan <a.kesavan@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Cristian Stoica <cristian.stoica@freescale.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Ville Syrjälä <syrjala@sci.fi>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: dri-devel@lists.freedesktop.org
Link: http://lkml.kernel.org/r/1429722736-4473-1-git-send-email-mcgrof@do-not-panic.com
Link: http://lkml.kernel.org/r/1432628901-18044-11-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As part of the effort to phase out MTRR use document
write-combining MTRR effects on pages with different non-PAT
page attributes flags and different PAT entry values. Extend
arch_phys_wc_add() documentation to clarify power of two sizes /
boundary requirements as we phase out mtrr_add() use.
Lastly hint towards ioremap_uc() for corner cases on device
drivers working with devices with mixed regions where MTRR size
requirements would otherwise not enable write-combining
effective memory types.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ville Syrjälä <syrjala@sci.fi>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-fbdev@vger.kernel.org
Link: http://lkml.kernel.org/r/1430343851-967-3-git-send-email-mcgrof@do-not-panic.com
Link: http://lkml.kernel.org/r/1432628901-18044-10-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds the argument 'uniform' to mtrr_type_lookup(),
which gets set to 1 when a given range is covered uniformly by
MTRRs, i.e. the range is fully covered by a single MTRR entry or
the default type.
Change pud_set_huge() and pmd_set_huge() to honor the 'uniform'
flag to see if it is safe to create a huge page mapping in the
range.
This allows them to create a huge page mapping in a range
covered by a single MTRR entry of any memory type. It also
detects a non-optimal request properly. They continue to check
with the WB type since it does not effectively change the
uniform mapping even if a request spans multiple MTRR entries.
pmd_set_huge() logs a warning message to a non-optimal request
so that driver writers will be aware of such a case. Drivers
should make a mapping request aligned to a single MTRR entry
when the range is covered by MTRRs.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
[ Realign, flesh out comments, improve warning message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1431714237-880-7-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1432628901-18044-8-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MTRRs contain fixed and variable entries. mtrr_type_lookup() may
repeatedly call __mtrr_type_lookup() to handle a request that
overlaps with variable entries.
However, __mtrr_type_lookup() also handles the fixed entries,
which do not have to be repeated. Therefore, this patch creates
separate functions, mtrr_type_lookup_fixed() and
mtrr_type_lookup_variable(), to handle the fixed and variable
ranges respectively.
The patch also updates the function headers to clarify the
return values and output argument. It updates comments to
clarify that the repeating is necessary to handle overlaps with
the default type, since overlaps with multiple entries alone can
be handled without such repeating.
There is no functional change in this patch.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1431714237-880-6-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1432628901-18044-6-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
mtrr_type_lookup() returns verbatim 0xFF when MTRRs are
disabled. This patch defines MTRR_TYPE_INVALID to clarify the
meaning of this value, and documents its usage.
Document the return values of the kernel virtual address mapping
helpers pud_set_huge(), pmd_set_huge, pud_clear_huge() and
pmd_clear_huge().
There is no functional change in this patch.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1431714237-880-5-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1432628901-18044-5-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'mtrr_state.enabled' contains the FE (fixed MTRRs enabled)
and E (MTRRs enabled) flags in MSR_MTRRdefType. Intel SDM,
section 11.11.2.1, defines these flags as follows:
- All MTRRs are disabled when the E flag is clear.
The FE flag has no affect when the E flag is clear.
- The default type is enabled when the E flag is set.
- MTRR variable ranges are enabled when the E flag is set.
- MTRR fixed ranges are enabled when both E and FE flags
are set.
MTRR state checks in __mtrr_type_lookup() do not match with SDM.
Hence, this patch makes the following changes:
- The current code detects MTRRs disabled when both E and
FE flags are clear in mtrr_state.enabled. Fix to detect
MTRRs disabled when the E flag is clear.
- The current code does not check if the FE bit is set in
mtrr_state.enabled when looking at the fixed entries.
Fix to check the FE flag.
- The current code returns the default type when the E flag
is clear in mtrr_state.enabled. However, the default type
is UC when the E flag is clear. Remove the code as this
case is handled as MTRR disabled with the 1st change.
In addition, this patch defines the E and FE flags in
mtrr_state.enabled as follows.
- FE flag: MTRR_STATE_MTRR_FIXED_ENABLED
- E flag: MTRR_STATE_MTRR_ENABLED
print_mtrr_state() and x86_get_mtrr_mem_range() are also updated
accordingly.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1431714237-880-4-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1432628901-18044-4-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When an MTRR entry is inclusive to a requested range, i.e. the
start and end of the request are not within the MTRR entry range
but the range contains the MTRR entry entirely:
range_start ... [mtrr_start ... mtrr_end] ... range_end
__mtrr_type_lookup() ignores such a case because both
start_state and end_state are set to zero.
This bug can cause the following issues:
1) reserve_memtype() tracks an effective memory type in case
a request type is WB (ex. /dev/mem blindly uses WB). Missing
to track with its effective type causes a subsequent request
to map the same range with the effective type to fail.
2) pud_set_huge() and pmd_set_huge() check if a requested range
has any overlap with MTRRs. Missing to detect an overlap may
cause a performance penalty or undefined behavior.
This patch fixes the bug by adding a new flag, 'inclusive',
to detect the inclusive case. This case is then handled in
the same way as end_state:1 since the first region is the same.
With this fix, __mtrr_type_lookup() handles the inclusive case
properly.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1431714237-880-3-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1432628901-18044-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVYnloAAoJEHm+PkMAQRiGCgkH/j3r2djOOm4h83FXrShaHORY
p8TBI3FNj4fzLk2PfzqbmiDw2T2CwygB+pxb2Ac9CE99epw8qPk2SRvPXBpdKR7t
lolhhwfzApLJMZbhzNLVywUCDUhFoiEWRhmPqIfA3WXFcIW3t5VNXAoIFjV5HFr6
sYUlaxSI1XiQ5tldVv8D6YSFHms41pisziBIZmzhIUg10P6Vv3D0FbE74fjAJwx0
+08zj3EO7yQMv7Aeeq8F8AJ3628142rcZf0NWF5ohlKLRK3gt0cl9jO5U4Co2dDt
29v03LP5EI6jDKkIbuWlqRMq9YxJz7N3wnkzV0EJiqXucoqPLFDqzbxB4gnS1pI=
=7vbA
-----END PGP SIGNATURE-----
Merge tag 'v4.1-rc5' into x86/mm, to refresh the tree before applying new changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Using "mce=1,10000000" on the kernel cmdline to change the
monarch timeout does not work. The cause is that get_option()
does parse a subsequent comma in the option string and signals
that with a return value. So we don't need to check for a second
comma ourselves.
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1432120943-25028-1-git-send-email-xiexiuqi@huawei.com
Link: http://lkml.kernel.org/r/1432628901-18044-19-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When comparing the 'model name' field of each core in
/proc/cpuinfo it was noticed that there is a whitespace
difference between the cores' model names.
After some quick investigation it was noticed that the model
name fields were actually different -- processor 0's model name
field had trailing whitespace removed, while the other
processors did not.
Another way of seeing this behaviour is to convert spaces into
underscores in the output of /proc/cpuinfo,
[thetango@prarit ~]# grep "^model name" /proc/cpuinfo | uniq -c | sed 's/\ /_/g'
______1_model_name :_AMD_Opteron(TM)_Processor_6272
_____63_model_name :_AMD_Opteron(TM)_Processor_6272_________________
which shows the discrepancy.
This occurs because the kernel calls strim() on cpu 0's
x86_model_id field to output a pretty message to the console in
print_cpu_info(), and as a result strips the whitespace at the
end of the ->x86_model_id field.
But, the ->x86_model_id field should be the same for the all
identical CPUs in the box. Thus, we need to remove both leading
and trailing whitespace.
As a result, the print_cpu_info() output looks like
smpboot: CPU0: AMD Opteron(TM) Processor 6272 (fam: 15, model: 01, stepping: 02)
and the x86_model_id field is correct on all processors on AMD
platforms:
_____64_model_name :_AMD_Opteron(TM)_Processor_6272
Output is still correct on an Intel box:
____144_model_name :_Intel(R)_Xeon(R)_CPU_E7-8890_v3_@_2.50GHz
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1432050210-32036-1-git-send-email-prarit@redhat.com
Link: http://lkml.kernel.org/r/1432628901-18044-15-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
copy_kernel_to_xregs_booting() has a second parameter that is the mask
of xfeatures that should be copied - but this parameter is always -1.
Simplify the call site of this function, this also makes it more
similar to the function call signature of other copy_kernel_to*regs()
functions.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bring the __copy_fpstate_to_fpregs() and copy_fpstate_to_fpregs() functions
in line with the parameter passing convention of other kernel-to-FPU-registers
copying functions: pass around an in-memory FPU register state pointer,
instead of struct fpu *.
NOTE: This patch also changes the assembly constraint of the FXSAVE-leak
workaround from 'fpu->fpregs_active' to 'fpstate' - but that is fine,
as we only need a valid memory address there for the FILDL instruction.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
None of the copy_kernel_to_*regs() FPU register copying functions are
supposed to fail, and all of them have debugging checks that enforce
this.
Remove their return values and simplify their call sites, which have
redundant error checks and error handling code paths.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bring the __copy_fpstate_to_fpregs() and copy_fpstate_to_fpregs() functions
in line with the naming of other kernel-to-FPU-registers copying functions.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The copy_fpstate_to_fpregs() function is never supposed to fail,
so add a debugging check to its call site in fpu__restore().
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
fpu__activate_fpstate_write() is used before ptrace writes to the fpstate
context. Because it expects the modified registers to be reloaded on the
nexts context switch, it's only valid to call this function for stopped
child tasks.
- add a debugging check for this assumption
- remove code that only runs if the current task's FPU state needs
to be saved, which cannot occur here
- update comments to match the implementation
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remaining users of fpu__activate_fpstate() are all places that want to modify
FPU registers, rename the function to fpu__activate_fpstate_write() according
to this usage.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
fpu__activate_fpstate_read() is used before FPU registers are
read from the fpstate by ptrace and core dumping.
It's not necessary to unlazy non-current child tasks in this case,
since the reading of registers is non-destructive.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently fpu__activate_fpstate() is used for two distinct purposes:
- read access by ptrace and core dumping, where in the core dumping
case the current task's FPU state may be examined as well.
- write access by ptrace, which modifies FPU registers and expects
the modified registers to be reloaded on the next context switch.
Split out the reading side into fpu__activate_fpstate_read().
( Note that this is just a pure duplication of fpu__activate_fpstate()
for the time being, we'll optimize the new function in the next patch. )
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bobby Powers reported the following FPU warning during ELF coredumping:
WARNING: CPU: 0 PID: 27452 at arch/x86/kernel/fpu/core.c:324 fpu__activate_stopped+0x8a/0xa0()
This warning unearthed an invalid assumption about fpu__activate_stopped()
that I added in:
67e97fc2ec ("x86/fpu: Rename init_fpu() to fpu__unlazy_stopped() and add debugging check")
the old init_fpu() function had an (intentional but obscure) side effect:
when FPU registers are accessed for the current task, for reading, then
it synchronized live in-register FPU state with the fpstate by saving it.
So fix this bug by saving the FPU if we are the current task. We'll
still warn in fpu__save() if this is called for not yet stopped
child tasks, so the debugging check is still preserved.
Also rename the function to fpu__activate_fpstate(), because it's not
exclusively used for stopped tasks, but for the current task as well.
( Note that this bug calls for a cleaner separation of access-for-read
and access-for-modification FPU methods, but we'll do that in separate
patches. )
Reported-by: Bobby Powers <bobbypowers@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is a 'pt' variable in the outer scope of pt_event_stop() with the same
type, we don't really need another one in the inner scope.
This patch removes the redundant variable declaration.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1432308626-18845-8-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Initially, we were trying to guard against scenarios where somebody
attaches to the system with a hardware debugger while PT is enabled
from software and pt_is_running() tries to make sure we handle this
better, but the truth is, there is still a race window no matter what
and people with hardware debuggers should really know what they are
doing anyway.
In other words, there is no point in keeping this one around, and
it's one RDMSR instructions fewer in the fast path.
The case when PT is enabled by the BIOS at boot time is handled
in the driver initialization path and doesn't use pt_is_running().
This patch gets rid of it.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1429622177-22843-6-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, the description of pt_buffer_reset_offsets() lacks information
about its calling constraints and ordering with regards to other buffer
management functions.
Add a clarification about when this function has to be called.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1429622177-22843-5-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The comments in the driver don't make it absolutely clear as to what
exactly is the calling order and other possible constraints of buffer
management functions.
Document constraints and calling order for the buffer configuration
functions. While at it, replace a redundant check in
pt_buffer_reset_markers() with an explanation why it is not needed.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1429622177-22843-4-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, there's a set-but-not-used variable in setup_topa_index();
this patch gets rid of it. And while at it, fixes a style issue with
brackets around a one-line block.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1429622177-22843-2-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Don't bother with taking locks if we're not actually going to do
anything. Also, drop the _irqsave(), this is very much only called
from IRQ-disabled context.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For some obscure reason intel_{start,stop}_scheduling() copy the HT
state to an intermediate array. This would make sense if we ever were
to make changes to it which we'd have to discard.
Except we don't. By the time we call intel_commit_scheduling() we're;
as the name implies; committed to them. We'll never back out.
A further hint its pointless is that stop_scheduling() unconditionally
publishes the state.
So the intermediate array is pointless, modify the state in place and
kill the extra array.
And remove the pointless array initialization: INTEL_EXCL_UNUSED == 0.
Note; all is serialized by intel_excl_cntr::lock.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Both intel_commit_scheduling() and intel_get_excl_contraints() test
for cntr < 0.
The only way that can happen (aside from a bug) is through
validate_event(), however that is already captured by the
cpuc->is_fake test.
So remove these test and simplify the code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move the code of intel_commit_scheduling() to the right place, which is
in between start() and stop().
No change in functionality.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The intel_commit_scheduling() callback is pointlessly different from
the start and stop scheduling callback.
Furthermore, the constraint should never be NULL, so remove that test.
Even though we'll never get called (because we NULL the callbacks)
when !is_ht_workaround_enabled() put that test in.
Collapse the (pointless) WARN_ON_ONCE() and bail on !cpuc->excl_cntrs --
this is doubly pointless, because its the same condition as
is_ht_workaround_enabled() which was already pointless because the
whole method won't ever be called.
Furthremore, make all the !excl_cntrs test WARN_ON_ONCE(); they're all
pointless, because the above, either the function
({get,put}_excl_constraint) are already predicated on it existing or
the is_ht_workaround_enabled() thing is the same test.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have two 'struct event_constraint' local variables in
intel_get_excl_constraints(): 'cx' and 'c'.
Instead of using 'cx' after the dynamic allocation, put all 'cx' inside
the dynamic allocation block and use 'c' outside of it.
Also use direct assignment to copy the structure; let the compiler
figure it out.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Lockdep is very good at finding incorrect IRQ state while locking and
is far better at telling us if we hold a lock than the _is_locked()
API. It also generates less code for !DEBUG kernels.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For some obscure reason the current code accounts the current SMT
thread's state on the remote thread and reads the remote's state on
the local SMT thread.
While internally consistent, and 'correct' its pointless confusion we
can do without.
Flip them the right way around.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since we write RMID values to MSRs the correct type to use is 'u32'
because that clearly articulates we're writing a hardware register
value.
Fix up all uses of RMID in this code to consistently use the correct data
type.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Will Auld <will.auld@intel.com>
Link: http://lkml.kernel.org/r/1432285182-17180-1-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'closid' (CLass Of Service ID) is used for the Class based Cache
Allocation Technology (CAT). Add explicit storage to the per cpu cache
for it, so it can be used later with the CAT support (requires to move
the per cpu data).
While at it:
- Rename the structure to intel_pqr_state which reflects the actual
purpose of the struct: cache values which go into the PQR MSR
- Rename 'cnt' to rmid_usecnt which reflects the actual purpose of
the counter.
- Document the structure and the struct members.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Will Auld <will.auld@intel.com>
Link: http://lkml.kernel.org/r/20150518235150.240899319@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the usage counter is non-zero there is no point to update the rmid
in the PQR MSR.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Will Auld <will.auld@intel.com>
Link: http://lkml.kernel.org/r/20150518235150.080844281@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'struct intel_cqm_state' is a strict per CPU cache of the rmid and the
usage counter. It can never be modified from a remote CPU.
The three functions which modify the content: intel_cqm_event[start|stop|del]
(del maps to stop) are called from the perf core with interrupts disabled
which is enough protection for the per CPU state values.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Will Auld <will.auld@intel.com>
Link: http://lkml.kernel.org/r/20150518235150.001006529@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
