When there are a large number of processors in a system, there
is an excessive amount of messages sent to the system console.
It's estimated that with 4096 processors in a system, and the
console baudrate set to 56K, the startup messages will take
about 84 minutes to clear the serial port.
This set of patches limits the number of repetitious messages
which contain no additional information. Much of this information
is obtainable from the /proc and /sysfs. Some of the messages
are also sent to the kernel log buffer as KERN_DEBUG messages so
dmesg can be used to examine more closely any details specific to
a problem.
The new cpu bootup sequence for system_state == SYSTEM_BOOTING:
Booting Node 0, Processors #1#2#3#4#5#6#7 Ok.
Booting Node 1, Processors #8#9#10#11#12#13#14#15 Ok.
...
Booting Node 3, Processors #56#57#58#59#60#61#62#63 Ok.
Brought up 64 CPUs
After the system is running, a single line boot message is displayed
when CPU's are hotplugged on:
Booting Node %d Processor %d APIC 0x%x
Status of the following lines:
CPU: Physical Processor ID: printed once (for boot cpu)
CPU: Processor Core ID: printed once (for boot cpu)
CPU: Hyper-Threading is disabled printed once (for boot cpu)
CPU: Thermal monitoring enabled printed once (for boot cpu)
CPU %d/0x%x -> Node %d: removed
CPU %d is now offline: only if system_state == RUNNING
Initializing CPU#%d: KERN_DEBUG
Signed-off-by: Mike Travis <travis@sgi.com>
LKML-Reference: <4B219E28.8080601@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
fixup_irqs() already has a mdelay(). Remove the extra and
unnecessary mdelay() from cpu_disable_common().
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: ebiederm@xmission.com
Cc: garyhade@us.ibm.com
LKML-Reference: <20091201233335.232177348@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add debugobject support to track the life time of work_structs.
While at it, remove duplicate definition of
INIT_DELAYED_WORK_ON_STACK().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Remove open-coded zalloc_cpumask_var() and zalloc_cpumask_var_node().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits)
x86: Move get/set_wallclock to x86_platform_ops
x86: platform: Fix section annotations
x86: apic namespace cleanup
x86: Distangle ioapic and i8259
x86: Add Moorestown early detection
x86: Add hardware_subarch ID for Moorestown
x86: Add early platform detection
x86: Move tsc_init to late_time_init
x86: Move tsc_calibration to x86_init_ops
x86: Replace the now identical time_32/64.c by time.c
x86: time_32/64.c unify profile_pc
x86: Move calibrate_cpu to tsc.c
x86: Make timer setup and global variables the same in time_32/64.c
x86: Remove mca bus ifdef from timer interrupt
x86: Simplify timer_ack magic in time_32.c
x86: Prepare unification of time_32/64.c
x86: Remove do_timer hook
x86: Add timer_init to x86_init_ops
x86: Move percpu clockevents setup to x86_init_ops
x86: Move xen_post_allocator_init into xen_pagetable_setup_done
...
Fix up conflicts in arch/x86/include/asm/io_apic.h
* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, pat: Fix cacheflush address in change_page_attr_set_clr()
mm: remove !NUMA condition from PAGEFLAGS_EXTENDED condition set
x86: Fix earlyprintk=dbgp for machines without NX
x86, pat: Sanity check remap_pfn_range for RAM region
x86, pat: Lookup the protection from memtype list on vm_insert_pfn()
x86, pat: Add lookup_memtype to get the current memtype of a paddr
x86, pat: Use page flags to track memtypes of RAM pages
x86, pat: Generalize the use of page flag PG_uncached
x86, pat: Add rbtree to do quick lookup in memtype tracking
x86, pat: Add PAT reserve free to io_mapping* APIs
x86, pat: New i/f for driver to request memtype for IO regions
x86, pat: ioremap to follow same PAT restrictions as other PAT users
x86, pat: Keep identity maps consistent with mmaps even when pat_disabled
x86, mtrr: make mtrr_aps_delayed_init static bool
x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init
generic-ipi: Allow cpus not yet online to call smp_call_function with irqs disabled
x86: Fix an incorrect argument of reserve_bootmem()
x86: Fix system crash when loading with "reservetop" parameter
* 'x86-txt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, intel_txt: clean up the impact on generic code, unbreak non-x86
x86, intel_txt: Handle ACPI_SLEEP without X86_TRAMPOLINE
x86, intel_txt: Fix typos in Kconfig help
x86, intel_txt: Factor out the code for S3 setup
x86, intel_txt: tboot.c needs <asm/fixmap.h>
intel_txt: Force IOMMU on for Intel TXT launch
x86, intel_txt: Intel TXT Sx shutdown support
x86, intel_txt: Intel TXT reboot/halt shutdown support
x86, intel_txt: Intel TXT boot support
Current sched domain creation code can't handle multi-node processors.
When switching to power_savings scheduling errors show up and
system might hang later on (due to broken sched domain hierarchy):
# echo 0 >> /sys/devices/system/cpu/sched_mc_power_savings
CPU0 attaching sched-domain:
domain 0: span 0-5 level MC
groups: 0 1 2 3 4 5
domain 1: span 0-23 level NODE
groups: 0-5 6-11 18-23 12-17
...
# echo 1 >> /sys/devices/system/cpu/sched_mc_power_savings
CPU0 attaching sched-domain:
domain 0: span 0-11 level MC
groups: 0 1 2 3 4 5 6 7 8 9 10 11
ERROR: parent span is not a superset of domain->span
domain 1: span 0-5 level CPU
ERROR: domain->groups does not contain CPU0
groups: 6-11 (__cpu_power = 12288)
ERROR: groups don't span domain->span
domain 2: span 0-23 level NODE
groups:
ERROR: domain->cpu_power not set
ERROR: groups don't span domain->span
...
Fixing all aspects of power-savings scheduling for Magny-Cours needs
some larger changes in the sched domain creation code.
As a short-term and temporary workaround avoid the problems by
extending "the worst possible hack" ;-(
and always use llc_shared_map on AMD Magny-Cours when MC domain span
is calculated.
With this I get:
# echo 1 >> /sys/devices/system/cpu/sched_mc_power_savings
CPU0 attaching sched-domain:
domain 0: span 0-5 level MC
groups: 0 1 2 3 4 5
domain 1: span 0-5 level CPU
groups: 0-5 (__cpu_power = 6144)
domain 2: span 0-23 level NODE
groups: 0-5 (__cpu_power = 6144) 6-11 (__cpu_power = 6144) 18-23 (__cpu_power = 6144) 12-17 (__cpu_power = 6144)
...
I.e. no errors during sched domain creation, no system hangs, and also
mc_power_savings scheduling works to a certain extend.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Move tboot.h from asm to linux to fix the build errors of intel_txt
patch on non-X86 platforms. Remove the tboot code from generic code
init/main.c and kernel/cpu.c.
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
paravirt overrides the setup of the default apic timers as per cpu
timers. Moorestown needs to override that as well.
Move it to x86_init_ops setup and create a separate x86_cpuinit struct
which holds the function for the secondary evtl. hotplugabble CPUs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
SDM Vol 3a section titled "MTRR considerations in MP systems" specifies
the need for synchronizing the logical cpu's while initializing/updating
MTRR.
Currently Linux kernel does the synchronization of all cpu's only when
a single MTRR register is programmed/updated. During an AP online
(during boot/cpu-online/resume) where we initialize all the MTRR/PAT registers,
we don't follow this synchronization algorithm.
This can lead to scenarios where during a dynamic cpu online, that logical cpu
is initializing MTRR/PAT with cache disabled (cr0.cd=1) etc while other logical
HT sibling continue to run (also with cache disabled because of cr0.cd=1
on its sibling).
Starting from Westmere, VMX transitions with cr0.cd=1 don't work properly
(because of some VMX performance optimizations) and the above scenario
(with one logical cpu doing VMX activity and another logical cpu coming online)
can result in system crash.
Fix the MTRR initialization by doing rendezvous of all the cpus. During
boot and resume, we delay the MTRR/PAT init for APs till all the
logical cpu's come online and the rendezvous process at the end of AP's bringup,
will initialize the MTRR/PAT for all AP's.
For dynamic single cpu online, we synchronize all the logical cpus and
do the MTRR/PAT init on the AP that is coming online.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Support for graceful handling of sleep states (S3/S4/S5) after an Intel(R) TXT launch.
Without this patch, attempting to place the system in one of the ACPI sleep
states (S3/S4/S5) will cause the TXT hardware to treat this as an attack and
will cause a system reset, with memory locked. Not only may the subsequent
memory scrub take some time, but the platform will be unable to enter the
requested power state.
This patch calls back into the tboot so that it may properly and securely clean
up system state and clear the secrets-in-memory flag, after which it will place
the system into the requested sleep state using ACPI information passed by the kernel.
arch/x86/kernel/smpboot.c | 2 ++
drivers/acpi/acpica/hwsleep.c | 3 +++
kernel/cpu.c | 7 ++++++-
3 files changed, 11 insertions(+), 1 deletion(-)
Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Ingo Molnar reported that read_apic is buggy novadays:
[ 0.000000] Using APIC driver default
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at arch/x86/kernel/apic/apic.c:254 native_apic_read_dummy+0x2d/0x3b()
[ 0.000000] Hardware name: HP OmniBook PC
Indeed we still rely on apic->read operation for SMP compiled
kernel. And instead of disfigure the SMP code with #ifdef we
allow to call apic->read. To capture any unexpected results
we check for apic->read being called for sane reason via
WARN_ON_ONCE but(!) instead of OR we should use AND logical
operation (thanks Yinghai for spotting the root of the problem).
Along with that we could be have bad MP table and we are
to fix it that way no SMP started and no complains about
BIOS bug if apic was just disabled via command line.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090607124840.GD4547@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A caller (do_boot_cpu) already has __cpuinit attribute.
Since HOTPLUG_CPU depends on SMP && HOTPLUG it doesn't
lead to panic at moment.
[ Impact: cleanup ]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090418194528.GD25510@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
didn't set it for UV_NON_UNIQUE_APIC, so don't restore it
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <49D6A6B9.6060501@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: reduce kernel memory usage when CONFIG_CPUMASK_OFFSTACK=y
Straightforward conversion: done for 32 and 64 bit kernels.
node_to_cpumask_map is now a cpumask_var_t array.
64-bit used to be a dynamic cpumask_t array, and 32-bit used to be a
static cpumask_t array.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Impact: cleanup
We take the 64-bit code and use it on 32-bit as well. The new file
is called mm/numa.c.
In a minor cleanup, we use cpu_none_mask instead of declaring a local
cpu_mask_none.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y
In most places it's cleaner to use the accessors cpu_sibling_mask()
and cpu_core_mask() wrappers which already exist.
I couldn't avoid cleaning up the access in oprofile, either.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Impact: cleanup and code size reduction on 64-bit
This code is only applied to Intel Pentium and AMD K7 32-bit cpus.
Move those checks to intel_init()/amd_init() for 32-bit
so 64-bit will not build this code.
Also change to use cpu_index check to see if we need to emit warning.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <49B377D2.8030108@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
- rename apic->wakeup_cpu to apic->wakeup_secondary_cpu, to
make it apparent that this is an SMP-only method
- handle NULL ->wakeup_secondary_cpus to mean the default INIT
wakeup sequence - this allows simplification of the APIC
driver templates.
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
x86_quirks->update_apic() calling looks crazy. so try to remove it:
1. every apic take wakeup_cpu member directly
2. separate es7000_apic to es7000_apic_cluster
3. use uv_wakeup_cpu directly
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
so could deselect x2apic
and INTR_REMAP will select x2apic
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
disable_ioapic_setup() in init/main.c is ugly as the function is
x86-specific. The #ifdef inline prototype there is ugly too.
Replace it with a generic arch_disable_smp_support() function - which
has a weak alias for non-x86 architectures and for non-ioapic x86 builds.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, prepare for xen boot fix.
Xen needs to call this function very early to setup the GDT and
per-cpu segments. Remove the call to smp_processor_id() and just
pass in the cpu number.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
just like 64 bit switch from flat logical APIC messages to
flat physical mode automatically.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
X86_PC is the only remaining 'sub' architecture, so we dont need
it anymore.
This also cleans up a few spurious references to X86_PC in the
driver space - those certainly should be X86.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
X86_GENERICARCH is a misnomer - it contains non-PC 32-bit architectures
that are not included in the default build.
Rename it to X86_32_NON_STANDARD.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86/Voyager can boot on non-zero processors. While that can probably
be fixed by properly remapping the physical CPU IDs, keep boot_cpu_id
for now for easier transition - and expand it to all of x86.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We are getting rid of subarchitecture support - move the hook files
to asm/. (These are now stale and should be replaced with more explicit
runtime mechanisms - but the transition is simpler this way.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Nothing exciting - a few subarches dont want APIC remote reads to
be performed - the others are content with the default method.
- extend the generic code to handle NULL methods
- clear out dummy methods and replace them with NULL
- clean up: remove wrapper macros, etc.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only NUMAQ does something substantial here, because it initializes
via NMIs (not via INIT as standard SMP startup) - so it needs to
store and restore the NMI vector.
- extend the generic code to handle NULL methods
- clear out dummy methods and replace them with NULL
- clean up: remove wrapper macros, etc.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only NUMAQ does something substantial here, because it initializes
via NMIs (not via INIT as standard SMP startup) - so it needs to
reset the APIC.
- extend the generic code to handle NULL methods
- clear out dummy methods and replace them with NULL
- clean up: remove wrapper macros, etc.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- spread out the namespace on a per APIC driver basis
- handle a NULL ->wait_for_init_deassert() as a 'dont wait' default method
- remove NUMAQ and Summit handlers
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- spread out the namespace to per driver methods
- extend it to 64-bit as well so that we can use
apic->check_phys_apicid_present() unconditionally
Signed-off-by: Ingo Molnar <mingo@elte.hu>
