This commit slightly simplifies the sgnc_start() function by
rearranging it. As a result the indentation level is reduced.
This is not the functional change.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit moves the utility functions out of dgnc_driver.c file and
puts them in the new dgnc_utils.{c,h} files. The accompanying changes
adjust the existing code to work with this design.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit slightly cleans up the dgnc_driver.c file. The changes
include removing one-line proxy functions as they were not needed.
Additionaly the pci 'remove' function is deleted because it was no
need for it.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This comit fixes the following sparse warnign:
drivers/staging/dgnc/dgnc_tty.c:572:1:
warning: the frame size of 1060 bytes is larger than 1024 bytes
[-Wframe-larger-than=]
This was caused by having buffer as an automatic variable. This commit
moves it from the stack to the heap.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit corrects the 'no space before tabs' checkpath warning.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes the following checkpatch warnings:
WARNING: externs should be avoided in .c files
#80: FILE: drivers/staging/dgnc/dgnc_driver.c:80:
+int dgnc_init_module(void);
#81: FILE: drivers/staging/dgnc/dgnc_driver.c:81:
+void dgnc_cleanup_module(void);
This was caused by putting the declarations for module init and module
exit fucntions on the top of the file. The fix removes these
declarations plus it also corrects the type of the init/exit functions.
Due to the dependency between init and exit functions the
dgnc_cleanup_module had to be put first.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to the nokia_fw.c file that removes an unnecessary return statement found by the checkpatch.pl tool
Signed-off-by: Lars Hamre <hamham91@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following sparse warning :
In file included from drivers/staging/wlan-ng/prism2usb.c:5:0:
drivers/staging/wlan-ng/prism2fw.c: In function
‘read_cardpda.constprop.43’:
drivers/staging/wlan-ng/prism2fw.c:792:1: warning: the frame size of
1068 bytes is larger than 1024 bytes [-Wframe-larger-than=]
The variable to 'struct p80211msg_p2req_readpda' was previously being created
on the stack, which inturn exeeded the frame size limit, resulting in a
sparse warning. This patch alloctes the memory to the structure dynamically
and the operations are left unchanged.
Signed-off-by: A Raghavendra Rao <arrao@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_RTS5208_DEBUG is no more needed, we rely on dynamic debug config options
instead.
Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use dev_dbg with %*ph format specifier and print_hex_dump_bytes to dump memory
instead of relying on custom macro.
Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Of_node_put supports NULL as its argument, so the initial test is not
necessary.
Suggested by Uwe Kleine-König.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e;
@@
-if (e)
of_node_put(e);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of the various list helper functions to improve readability.
Signed-off-by: Christoph Jaeger <email@christophjaeger.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a slab cache rather than rolling our own free list.
Signed-off-by: Christoph Jaeger <email@christophjaeger.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a slab cache rather than rolling our own free list.
Signed-off-by: Christoph Jaeger <email@christophjaeger.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a slab cache rather than rolling our own free list.
Signed-off-by: Christoph Jaeger <email@christophjaeger.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify the somewhat overcomplicated application interface; improves
readability and saves a bunch of lines.
Use designated struct initializers for clarity.
Signed-off-by: Christoph Jaeger <email@christophjaeger.info>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No need to return a value from elt_buf_init().
Signed-off-by: Christoph Jaeger <email@christophjaeger.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Member 'ops' has already been initialized by calling cdev_init().
Signed-off-by: Christoph Jaeger <email@christophjaeger.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OZ_MAX_TIMER_POOL_SIZE is not used anywhere; remove it.
Signed-off-by: Christoph Jaeger <email@christophjaeger.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers: staging: lustre: fix sparse warning: symbol XYZ was
not declared. Should it be static?
This was done by declaring them static. This could be done because the functions
were used only in this file.
Deleted the function lnet_print_text_bufs because it were unused.
Compiled without an error.
Done to complete a eudyptula task.
Signed-off-by: Benedict Boerger <benedict.boerger@cs.tu-dortmund.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove spaces between the function names and open paranthesis and use the kernel coding style.
Signed-off-by: Tom Wales <twales518@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove ComputeTxTime since it is not used.
Signed-off-by: Fernando Apesteguia <fernando.apesteguia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to the rtl8188e_xmit.c file that fixes up a missing
blank line warning found by the checkpatch.pl tool.
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RT_TRACE uses require unnecessary parentheses.
Fix the #define and remove the uses.
Neaten the RT_TRACE lines and multi-line argument wrapping.
dynamic debug can add KBUILD_MODNAME and __func__ so remove those
from the #define.
Use a single statement pr_debug instead of pr_debug and pr_cont
which doesn't support dynamic debug anyway.
Miscellaneous grammar and spelling fixes on the RT_TRACE uses.
Compile tested only.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Also remove related unreachable code.
Signed-off-by: Antoine Schweitzer-Chaput <antoine@schweitzer-chaput.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Also remove the unreachable code.
Signed-off-by: Antoine Schweitzer-Chaput <antoine@schweitzer-chaput.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Also remove the code previously under #ifndef USE_ONE_PIPE.
Signed-off-by: Antoine Schweitzer-Chaput <antoine@schweitzer-chaput.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Also remove the code now unreachable.
Signed-off-by: Antoine Schweitzer-Chaput <antoine@schweitzer-chaput.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable support for the National Instruments USB-6501 module.
The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that
provides 24 digital I/O lines channels and one 32-bit counter.
This is a preliminary version:
GPIO: works
counter: doesn't work
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local variable 'irq' is not necessary in dio200_attach(). Just
pass the it->options[1] value directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This member of the boardinfo is not used by the drivers. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'mainsize' member in the boardinfo for the DIO200 PCI boards is only used
for a sanity check of the pci_resource_len(). This sanity check is not needed.
Remove the sanity check along with the 'mainsize' values in the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the ISA DIO200 boards have an i/o region size of 0x20 (DIO200_IO_SIZE).
Remove the boardinfo and open code the size in the comedi_request_region()
call.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This member of the boardinfo is not used by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The private data in this driver only has one member, 'intr_sd', which is
the index to the interrupt subdevice.
This member is initialized during the attach of the driver when the sd_intr
subdevice is detected in the boadinfo 'layout'. The member is then used in
the interrupt handler to get the pointer to the subdevice.
This member is not necessary. The comedi_device 'read_subdev' is also
initialized during the attach. This can be used in the interrupt handler
to get the subdevice pointer.
Refactor the code to not require the private data and remove the struct
and its allocations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi core module calls `comedi_set_hw_dev()` to associate the
hardware `struct device` with the `struct comedi_device` before it calls
the comedi driver's "auto_attach" hook `pci224_auto_attach()`. There is
no need for `pci224_auto_attach()` to call `comedi_set_hw_dev()` itself,
so remove the call.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`pci224_attach_common()` is now only called from `pci225_auto_attach()`,
so absorb it into that function.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macros `PCI_DEVICE_ID_AMPLICON_PCI224` and
`PCI_DEVICE_ID_AMPLICON_PCI234` are only used in the PCI module device
table `amplc_pci224_pci_table[]`. Just expand the macros where they are
used and remove them. The macro `PCI_DEVICE_ID_INVALID` is no longer
used either, so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `driver_data` member value from the matched entry of the PCI module
device table `amplc_pci224_pci_table[]` is passed through to our comedi
"auto_attach" handler, `pci224_auto_attach()`. Use that to index
directly into our static board data array `pci224_boards[]` instead of
calling `pci224_find_pci_board()` to search for the entry matching the
PCI device ID. That function can be removed. The `devid` and `model`
members of `struct pci224_board` are no longer needed either and can be
removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver no longer supports a "legacy" attach mechanism that searches
for a suitable PCI device and increments it's reference count, but since
the common "detach" handler `pci224_detach()` still has a left-over
`pci_dev_put()`, a matching `pci_dev_get()` is needed in the
"auto_attach" handler `pci224_auto_attach()`. There is no longer any
reason to "get" and "put" the PCI device, so those calls can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the driver no longer supports options in its "legacy" attach
mechanism to describe the jumper settings (or any options beyond
restricting a PCI search to a particular bus and/or slot), there is no
need to retain this mechanism in the driver. Remove the comedi driver
"attach" handler `pci224_attach()`, and the now unused
`pci224_find_pci_dev()`. Also, remove the "wildcard" entry from the
board table `pci224_boards[]` as it is no longer needed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
